d. 84% is the percent composition of Carbon, in, C₇H₁₆
What does "percent composition" mean?% composition is quite straightforward. You can determine by mass how much of each element is contained in a compound using its percent composition. A chemical compound is created when two or more components are combined.
The hydrocarbon includes 80% carbon, which translates to 80% of the molar mass being made up of carbon. Consequently, the hydrocarbon has four carbon atoms.
The percent composition is calculated by multiplying the total mass or quantity of an element present in a molecule or compound by the molecular mass of the compound.
learn more about molecular mass
https://brainly.com/question/837939
#SPJ1
A commonly available window-cleaning solution has a [H+] = 5.3 × 10−9 M . What is the pH?If the pOH for a solution is 3.00, what is the pH of the solution? Is the solution acidic or basic?
Since the pH is greater than 7, the solution is basic. So, the window-cleaning solution has a pH of 8.28, and the solution with a pOH of 3.00 has a pH of 11.00, which is basic.
How to calculate the pH of a solution?To find the pH of a window-cleaning solution with a [H+] = 5.3 × 10^−9 M, we can use the formula:
pH = -log[H+]
First, we need to find the pH of the solution:
pH = -log(5.3 × 10^−9)
pH ≈ 8.28
Next, we'll determine the pH of a solution with a pOH of 3.00. We can use the following relationship:
pH + pOH = 14
Now, we can find the pH:
pH = 14 - pOH
pH = 14 - 3.00
pH = 11.00
To know more about pH:
https://brainly.com/question/15626043
#SPJ11
Where should you dispose of capillary tubes when you have finished determining melting points?
When you have finished determining melting points using capillary tubes, it is important to dispose of them properly. We should dispose of them in a designated glass disposal container or sharps container.
Capillary tubes should be disposed in a sharps container or puncture-resistant container labeled as bio hazardous waste. This is because capillary tubes are small and fragile, and can easily break or puncture through regular trash bags. This ensures the safe and proper disposal of the capillary tubes, preventing any potential harm to yourself or others. Additionally, capillary tubes may have come into contact with potentially hazardous materials during the melting point determination process, so it is important to dispose of them in a safe and responsible manner.
Learn more about capillary tube : https://brainly.com/question/11470892
#SPJ11
In a Victor Meyer's experiment, 0. 52 g of an
organic liquid of molar mass 120 gmol" was
vapourized at a temperature of 298 K and
pressure of 1. 013 x 105 Nm 2. Calculate the
volume (cm?) of air displaced. (Given that the
saturated vapour pressure of water at 298 K is
2. 32 x 103 Nm).
The volume of air displaced is 102 cm³.
To solve this problem, we need to use ideal gas law; PV = nRT
where P will be the pressure, V will be the volume, n is number of moles, R is gas constant, and T will be the temperature.
First, we need to calculate the number of moles of an organic liquid that was vaporized. We can use the formula;
n = m/M
where m will be the mass of the substance and M is its molar mass.
n = 0.52 g / 120 gmol⁻¹
= 0.00433 mol
Next, we can rearrange the ideal gas law to solve for V;
V = nRT/P
V = (0.00433 mol)(8.31 J/mol·K)(298 K)/(1.013 x 10⁵ Pa)
= 0.102 L
Finally, we need to calculate the volume of air displaced. We know that the volume of the vaporized substance is the same as the volume of air displaced, since the substance completely vaporizes and fills the volume. However, we need to convert the volume to cm³;
0.102 L x 1000 cm³/L
= 102 cm³
To know more about ideal gas law here
https://brainly.com/question/6534096
#SPJ4
The conformation of a protein backbone can be described by specifying what?
The conformation of a protein backbone can be described by specifying the phi (ϕ) and psi (ψ) angles, also known as dihedral or torsion angles
The angles phi (ϕ) and psi (ψ) represent rotations around the bonds between the amino acids in the protein's primary structure. These angles provide insight into the spatial arrangement of a protein's backbone and ultimately influence the protein's overall structure and function.
To know more about protein refer here:
https://brainly.com/question/29776206#
#SPJ11
what are the limitations of litmus paper and phenolphthalein indicators? name two other indicators that can be used that do not have such limitations.
Litmus paper can only distinguish between acidic and basic solutions. It cannot provide a precise pH value or differentiate between different levels of acidity or basicity.
Phenolphthalein is effective within a narrow pH range of approximately 8.2 to 10.0. It is colorless below pH 8.2 and deep pink above pH 10.0.
Universal indicators and Bromothymol Blue indicators can be used that do not have such limitations.
These alternative indicators offer a wider pH range, clearer color changes, and better precision compared to litmus paper and phenolphthalein.
To learn more about pH, follow the link:
https://brainly.com/question/2288405
#SPJ12
Indicate whether each of the following are physical or chemical properties of sodium (Na): It is a good conductor of heat and electricity.
The property of sodium being a good conductor of heat and electricity is a physical property.
A physical property is a characteristic of a substance that can be observed or measured without changing the identity of the substance. Physical properties include color, density, hardness, and melting and boiling points. A chemical property describes the ability of a substance to undergo a specific chemical change.
#SPJ11
Learn more about properties of sodium on: https://brainly.com/question/20688856
106) Identify a carboxylic acid.A) CH3CH2SCH2CH3B) CH3CH2SHC) CH3CH2COOCH3D) CH3CH2CH2CH3E) CH3COOH
Identify a carboxylic acid among the given compounds. The correct answer is E) CH3COOH.
A carboxylic acid is an organic compound containing a carboxyl group, which has the general formula -COOH. Among the given compounds, only CH3COOH (also known as acetic acid) contains a carboxyl group and can be identified as a carboxylic acid.
Carboxylic acid:
Carboxylic acid is an organic acid containing a carboxyl group. The simplest examples are methanoic (or formic) acid and ethanoic (or acetic) acid. It is used in the production of polymers, biopolymers, coatings, adhesives, and pharmaceutical drugs. They also can be used as solvents, food additives, antimicrobials, and flavorings.
To know more about Acetic acid :
https://brainly.com/question/24194581
#SPJ11
the isoelectric point of amino acid with an acidic side chain is caluclated by everaging the pka value for?
The isoelectric point of an amino acid with an acidic side chain is calculated by averaging the pKa values for the carboxyl group and the amino group.
At the isoelectric point, the amino acid has a neutral charge because it exists as a zwitterion, with a negatively charged carboxyl group and a positively charged amino group balancing each other out. If the pH is lower than the isoelectric point, the amino acid will have a net positive charge due to the protonation of the amino group, and if the pH is higher than the isoelectric point, the amino acid will have a net negative charge due to the deprotonation of the carboxyl group.
To learn more about "isoelectric point", visit: https://brainly.com/question/14895346
#SPJ11
How many grams of dry NH4Cl need to be added to 2.40 L of a 0.800 M solution of ammonia to prepare a buffer solution that has a pH of 8.90? Kb for ammonia is 1.77 x 10¯5.
So, we need to add 24.07 grams of dry [tex]NH_4Cl[/tex] to 2.40 L of the 0.800 M ammonia solution to prepare a buffer solution with a pH of 8.90.
To prepare a buffer solution with pH 8.90, we need to use the Henderson-Hasselbalch equation, pH = pKa + log([A-]/[HA]).
First, we need to find the pKa of ammonia using the Kb value:
Kb = [[tex]NH_4Cl[/tex]+][OH-]/[NH3]
1.77 x 10^-5 = [tex]x^2[/tex] / (0.8 - x)
here x = [OH-] = [[tex]NH_4Cl[/tex]+].
Thus, [NH3] = 0.8 - x = 0.8 - 0.00133 = 0.79867 M.
pKa = -log(Ka) = 9.24.
Next, we can plug in the given pH and pKa values into the Henderson-Hasselbalch equation:
8.90 = 9.24 + log([A-]/[HA])
log([A-]/[HA]) = -0.34
[A-]/[HA] = 0.45
Finally, we can set up an ICE table to find the amount of [tex]NH_4Cl[/tex] needed:
[tex]NH_4Cl[/tex](s) → [tex]NH_4Cl[/tex]+(aq) + Cl-(aq)
I: n/a 0 M 0 M
C: -x +x M +x M
E: -x 0.45x M 0.55x M
where x is the amount of [tex]NH_4Cl[/tex] needed to create 0.45 M of NH4+ in solution.
From the equation, we know that 1 mole of [tex]NH_4Cl[/tex] produces 1 mole of NH4+.
Thus, 0.45 moles of NH+ requires 0.45 moles of [tex]NH_4Cl[/tex].
The molar mass of [tex]NH_4Cl[/tex] is 53.49 g/mol.
Therefore, the mass of [tex]NH_4Cl[/tex] needed is:
mass = 0.45 mol x 53.49 g/mol = 24.07 g.
Learn more about ammonia Visit: brainly.com/question/14445062
#SPJ4
How would you construct the SALCs, for SF6?
To construct the SALCs for SF₆, we need to apply the Linear Combination of Atomic Orbitals (LCAO) method.
The LCAO method involves combining the atomic orbitals of the constituent atoms in a molecule to create molecular orbitals. In the case of SF₆, we have one sulfur atom and six fluorine atoms. The electron configuration of sulfur is 1s²2s²2p⁶3s²3p⁴, while the electron configuration of fluorine is 1s²2s²2p⁵.
First, we need to identify the valence orbitals of the atoms that participate in the bond formation. In this case, the valence orbitals of sulfur are the 3s and 3p orbitals, while for fluorine, they are the 2s and 2p orbitals.
Next, we combine these valence orbitals using the LCAO method to form molecular orbitals. For SF₆, we obtain six molecular orbitals, where the σ and σ* orbitals result from the head-to-head and tail-to-tail overlap of the sulfur 3s and fluorine 2s orbitals, respectively. The remaining four molecular orbitals (π₂, π₃, π₂, π₃) arise from the overlap of the sulfur 3p and fluorine 2p orbitals.
Finally, we construct the SALCs (Symmetry-Adapted Linear Combinations) by taking appropriate linear combinations of the molecular orbitals. The SALCs have definite symmetries that correspond to the different irreducible representations of the molecular point group. In the case of SF₆, the molecule belongs to the Oh point group, and the SALCs can be classified according to the irreducible representations of this group.
To know more about Linear Combination of Atomic Orbitals, refer here:
https://brainly.com/question/29659143#
#SPJ11
A solution of NaF is added dropwise to a solution that is 0.0099 M in Ba2+. When the concentration of F- exceeds ________ M, BaF2 will precipitate. Neglect volume changes. For BaF2, Ksp = 1.7 × 10⁻⁶A) 8.6 × 10⁻⁵B) 1.7 × 10⁻⁴C) 1.3 × 10⁻²D) 3.3 × 10⁻³E) 1.7 × 10⁻⁸
When the concentration of F- exceeds option C- 1.3 × 10⁻²M BaF₂ will precipitate.
The balanced chemical equation for the reaction between NaF and Ba²⁺ is:
Ba²⁺ + 2F⁻ → BaF₂(s)
The solubility product expression for BaF₂ is:
Ksp = [Ba²⁺][F⁻]²
At equilibrium, the ion product (Qsp) is equal to the Ksp. Since the solution initially contains 0.0099 M Ba²⁺, the ion product is:
Qsp = [Ba²⁺][F⁻]² = (0.0099)(0)² = 0
Since Qsp is less than the Ksp, no precipitation occurs. Now, let x be the concentration of F⁻ added from the NaF solution, then the concentration of F⁻ in solution is [F⁻] = 2x, and the ion product becomes:
Qsp = [Ba²⁺][F⁻]² = (0.0099)(2x)² = 0.0396x²
When Qsp = Ksp, the concentration of F⁻ is:
Ksp = Qsp = 0.0396x²
x = (Ksp/0.0396) = (1.7 x 10⁻⁶/0.0396) = 1.3 × 10⁻² M
learn more about BaF₂ here:
https://brainly.com/question/31416430
#SPJ4
Is colloid mixture homogeneous or heterogeneous ( example : the cloudy water in a solution of soil and water after the soil settle out in the bottom of the container)
A colloidal mixture like the one you described, containing soil particles dispersed in water, is a heterogeneous mixture.
Some key points about heterogeneous vs homogeneous mixtures:• Homogeneous mixtures have a uniform composition and phase. The components at any point in the mixture have the same properties. Examples include solutions, alloys, gases.
• Heterogeneous mixtures have a non-uniform composition or phase. The components can be distinctly visible or have different properties at different points in the mixture. Examples include colloids, suspensions, emulsions.
• In a colloid like the soil in water solution you described, the soil particles are suspended in the water but do not dissolve or fully integrate into the water. So it has two phases - soil particles and water. The properties and composition vary at different points.
• These soil particles can eventually settle down over time due to gravity, as you observed. But as long as the particles remain suspended, the solution remains a heterogeneous colloid.
• Other signs of a heterogeneous mixture: Properties vary in different parts of the mixture, phases can be seen separately, components can be filtered or centrifuged apart.
So in summary, based on your description, the cloudy soil-water solution is indeed a heterogeneous colloidal mixture, not homogeneous. Let me know if you need more details.
Why should acetone not be used as the organic solvent in an acid-base extraction?
Ethanol, methanol, tetrahydrofuran (THF) and acetone are usually not suitable for extraction because they are completely miscible with most aqueous solutions.
Which cluster bomb unit (CBU) consists of a SUU-65/B dispenser and a submunitions payload of kinetic energy penetrators (KEP)?
The cluster bomb unit (CBU) that consists of a SUU-65/B dispenser and a submunitions payload of kinetic energy penetrators (KEP) is the CBU-97.
The CBU that consists of a SUU-65/B dispenser and a submunitions payload of kinetic energy penetrators (KEP) is the CBU-97 Sensor Fuzed Weapon (SFW). The CBU-97 SFW is designed to effectively target and destroy a variety of enemy assets, such as armored vehicles and other ground targets, using its advanced sensor technology and KEP submunitions.
To know more about CBU-97:
https://brainly.com/question/1303392
#SPJ11
fill in the blabk. "Of the following, a 0.1 M aqueous solution of __________ will have the highest freezing point.
a. K2CrO4
b. Al(NO3)3
c. Na2SO4
d. NaCl
e. sucrose"
e. sucrose
Of the following, a 0.1 M aqueous solution of sucrose will have the highest freezing point.
Based on your question, the correct answer is:
"Of the following, a 0.1 M aqueous solution of __e. sucrose__ will have the highest freezing point."
This is because sucrose is a non-electrolyte and does not dissociate into ions in an aqueous solution, leading to a smaller change in the freezing point compared to the other ionic compounds listed.
To know more about Solution click here .
brainly.com/question/30665317
#SPJ11
the more polar a compound is, the more strongly it binds to the polar, silica gel stationary phase on the tlc plate. does this result in a high or low rf value? explain. g
A high RF value results from a compound strongly binding to the polar silica gel stationary phase on a TLC plate.
Polar compounds are more strongly attracted to the polar silica gel stationary phase than non-polar compounds, so they travel more slowly along the plate and have a higher RF value. Polar compounds also have a greater difference in polarity between the mobile and stationary phases, so they move more slowly and require more strongly polar solvents to elute them.
A low RF value results when a compound binds weakly to the stationary phase and is eluted more quickly.
Know more about TLC plate here
https://brainly.com/question/17562109#
#SPJ11
both beer and wine choose one or more: a. use barley grains as a substrate. b. undergo fermentation with oenococcus oeni. c. are calorie-free beverages. d. are an
Both beer and wine undergo fermentation with oenococcus oeni. Therefore, the correct option is option B.
Fermentation is an anaerobic chemical process that breaks down molecules like glucose. More specifically, fermentation refers to the foaming that happens during the creation of beers and wines, a procedure that has been around for at least 10,000 years. Though this wasn't understood until the 17th century, the foaming is caused by the transformation of carbon dioxide gas. In the 19th century, French chemist and microbiologist Louis Pasteur coined the term "fermentation". Both beer and wine undergo fermentation with oenococcus oeni.
Therefore, the correct option is option B.
To know more about fermentation, here:
https://brainly.com/question/29760642
#SPJ4
When natural gas (predominantly methane, CH4) burns in air. The following reaction occurs. How much energy isinvolved in the combustion of 13.0 g of methane?CH4 + 2 O2 -> CO2 + 2 H2O deltaH = -213 kcal a. 2.77 * 10^3 kcalb. 16.4 kcalc. 173 kcald. 0.979 kcal
The amount of energy involved in the combustion of 13.0 g of methane is 173 kcal. The answer is c.
The given chemical equation for the combustion of methane indicates that one mole of CH₄ reacts with two moles of O₂ to form one mole of CO₂ and two moles of H₂O. The enthalpy change (ΔH) for this reaction is -213 kcal.
To calculate the energy involved in the combustion of 13.0 g of methane, we first need to determine the number of moles of CH₄ involved in the reaction:
n(CH₄) = m/M
where m is the mass of CH₄ and M is the molar mass of CH₄.
The molar mass of CH₄ is 12.01 + 4(1.01) = 16.05 g/mol.
So, n(CH₄) = 13.0 g / 16.05 g/mol = 0.810 mol
Now, we can use the stoichiometry of the chemical equation to calculate the amount of energy involved in the combustion of 0.810 mol of CH₄:
ΔH = -213 kcal/mol
Energy = n(CH₄) × ΔH
Energy = 0.810 mol × (-213 kcal/mol)
Energy = -172.8 kcal
To know more about combustion, refer here:
https://brainly.com/question/14335621#
#SPJ11
Which of these chemical species can behave as both a Brønsted-Lowry base and a Brønsted-Lowry acid?A. HSO4-B. No such species exists.C. NO3-D. CO32-
[tex]HSO^{-}_{4}[/tex] can behave as both a Brønsted-Lowry base and a Brønsted-Lowry acid.
What are Bronsted Lowry acids and bases?
A Brønsted-Lowry acid is a species that donates a proton (H+), while a Brønsted-Lowry base is a species that accepts a proton (H+). [tex]HSO^{-}_{4}[/tex] can act as both because it can donate a proton to become [tex]SO^{2-}_{4}[/tex] (acting as an acid) or accept a proton to become [tex]H_{2}SO_{4}[/tex] (acting as a base).
As an acid, it donates a proton to a water molecule and forms [tex]H_{3}O^{+}[/tex] ion. For example:
[tex]HSO^{-}_{4}[/tex] + [tex]H_{2}O[/tex] → [tex]H_{3}O^{+}[/tex] + [tex]SO^{2-}_{4}[/tex]
As a base, it accepts a proton from a water molecule and forms OH- ion. For example:
[tex]HSO^{-}_{4}[/tex] + [tex]H_{2}O[/tex] → [tex]H_{3}O^{+}[/tex] + [tex]SO^{2-}_{4}[/tex]
[tex]HSO^{-}_{4}[/tex] + [tex]H_{2}O[/tex] → [tex]H_{2}SO_{4}[/tex] + OH-
To know more about Bronsted Lowry Theory:
https://brainly.com/question/30460067
#SPJ11
What is the octet rule concerning C,N,O and F?
Octet rule: C, N, O, and F atoms aim to have 8 valence electrons through covalent/ionic bonding to achieve stability similar to noble gases.
Carbon has four valence electrons, and it can form up to four covalent bonds with other atoms to complete its octet. Nitrogen has five valence electrons and can form up to three covalent bonds to complete its octet.
Oxygen has six valence electrons and can form up to two covalent bonds to complete its octet. Fluorine has seven valence electrons and can form one covalent bond to complete its octet.
The octet rule provides a simple way to predict the types and number of bonds that C, N, O, and F atoms will form with other atoms. However, there are exceptions to the rule, such as molecules with an odd number of electrons, atoms with fewer than eight valence electrons, or atoms with expanded octets that can accommodate more than eight valence electrons.
To know more about octet rule, refer here:
https://brainly.com/question/865531#
#SPJ11
which is the adsorbent of choice, alumina or silica gel; for tlc analysis of 2-bromooctane and 2-decene?
The TLC analysis of 2-bromooctane and 2-decene, silica gel would be the adsorbent of choice due to its lower polarity and ability to effectively adsorb nonpolar compounds.
The choice of adsorbent for thin-layer chromatography (TLC) analysis depends on the polarity of the compound being analyzed. Alumina and silica gel are two commonly used adsorbents in TLC, with alumina being more polar than silica gel.
2-bromooctane and 2-decene are both nonpolar compounds, which means they will tend to have stronger interactions with less polar adsorbents. Therefore, silica gel would be a better choice for their TLC analysis.
Silica gel has a lower polarity than alumina and is often used for the separation of nonpolar and slightly polar compounds. It is a highly porous material that can adsorb small molecules effectively, making it a great choice for TLC.
In contrast, alumina is a more polar adsorbent and is typically used for the separation of polar compounds. It is also a good choice for acidic and basic compounds, but not for nonpolar compounds such as 2-bromooctane and 2-decene.
Click the below link, to learn more about Adsorbent:
https://brainly.com/question/31567698
#SPJ11
how can we calculate the pI of neutral amino acids?
The pI or isoelectric point of an Amino acid is the pH at which the net charge of the molecule is zero. For neutral amino acids, which have no charge, the pI can be calculated using the average of the two [tex]pK_a[/tex] values of its ionizable groups.
The two ionizable groups in neutral amino acids are the alpha-carboxyl group (-COOH) and the alpha-amino group (-[tex]NH_2[/tex]).
The [tex]pK_a[/tex] of the alpha-carboxyl group is around 2.2, while the [tex]pK_a[/tex] of the alpha-amino group is around 9.4.\
To calculate the pI, we take the average of these two pKa values:
pI = ([tex]pK_a1[/tex] + [tex]pK_a2[/tex]) / 2
pI = (2.2 + 9.4) / 2
pI = 5.8
Therefore, the pI of neutral amino acids is around 5.8.
This value can vary slightly depending on the specific amino acid and the conditions in which it is measured, but the calculation remains the same. The pI is an important parameter in protein biochemistry because it affects the solubility, stability, and behavior of proteins in different environments.
For More Such Questions on Amino acid
https://brainly.com/question/14351754
#SPJ11
In the Diels-Alder lab procedure, a wet paper towel is used. What is the purpose of the wet paper towel?
To help form crystals of the product out of solution
To encourage condensation during the reflux
To filter the product crystals out of solution
To hold the product as you determine its mass
The purpose of the wet paper towel in the Diels-Alder lab procedure is To encourage condensation during the reflux, preventing the reaction mixture from becoming too concentrated and potentially leading to the formation of unwanted side products option (B)
The purpose of the wet paper towel in the Diels-Alder lab procedure is to prevent the loss of solvent due to evaporation during the reflux process. The wet paper towel is placed on top of the round-bottom flask and acts as a cooling jacket.
As the solvent evaporates from the solution and condenses on the cool surface of the paper towel, it drips back down into the flask, preventing the solution from drying out. This helps maintain a constant volume and concentration of the reactants and ensures that the reaction proceeds as expected
Learn more about Diels-Alder
https://brainly.com/question/30751490
#SPJ4
Hydration of 1-Hexene
Can the IR spectrum be used to determine a mixture of 2-hexanol and 1-hexanol? Explain your answer.
Yes, the IR spectrum can be used to determine a mixture of 2-hexanol and 1-hexanol.
In the hydration of 1-hexene to produce a mixture of 2-hexanol and 1-hexanol, both alcohols will have similar functional groups in their IR spectra. Specifically, they will both have a broad peak in the range of 3200-3600 cm^-1, which is indicative of the O-H stretching vibration in an alcohol.
However, the IR spectra of 2-hexanol and 1-hexanol will also have distinct differences that can be used to differentiate between the two compounds. For example, 1-hexanol has a peak at around 1050-1150 cm^-1, which corresponds to the C-O stretching vibration in an alcohol. In contrast, 2-hexanol does not have this peak because the oxygen atom is attached to a secondary carbon atom, which changes the bond strength and thus the IR frequency.
Additionally, the IR spectra of the two alcohols may have different peak intensities or patterns, which can be used to further differentiate between them.
By analyzing the IR spectrum of the mixture of 2-hexanol and 1-hexanol, we can use the distinct differences in the IR spectra of the two alcohols to determine the relative concentrations of each compound in the mixture.
For such more questions on Hydration:
https://brainly.com/question/11112492
#SPJ11
a tensile strip of polystyrene that is 10 cm in length, 5 cm in width, and 2 cm in thickness is stretched to a length of 10.5 cm. assuming that the sample is isotropic and deforms uniformly, calculate the resulting width and percent volume change after deformation.
The resulting width of the strip is approximately 4.875 cm, and the percent volume change after deformation is approximately 1.71875%.
We can use Poisson's ratio to calculate the change in width, and the formula for percent volume change to calculate the change in volume:
Poisson's ratio (ν) relates the lateral strain (εl) to the axial strain (εa) in a material:
ν = -εl / εa
For an isotropic material, ν is constant and equal to one-third of the ratio of the transverse (lateral) and axial elastic moduli:
ν = E_l / 2G
where E_l is the transverse (lateral) elastic modulus and G is the shear modulus.
For polystyrene, the lateral elastic modulus is approximately equal to the axial elastic modulus, so we can use:
ν ≈ 0.5
Given that the length of the strip changes from 10 cm to 10.5 cm, the axial strain is:
εa = (ΔL / L) = (10.5 cm - 10 cm) / 10 cm = 0.05
Using Poisson's ratio, we can calculate the lateral strain:
εl = -ν εa = -0.5 x 0.05 = -0.025
The resulting width of the strip is:
W' = W (1 + εl) = 5 cm (1 - 0.025) = 4.875 cm
The percent volume change is given by:
% volume change = (ΔV / V) x 100%
where ΔV is the change in volume and V is the original volume.The original volume of the strip is:
V = L x W x H = 10 cm x 5 cm x 2 cm = 100 cm^3
The final volume of the strip is:
V' = L' x W' x H' = 10.5 cm x 4.875 cm x 2 cm = 101.71875 cm^3
Therefore, the change in volume is:
ΔV = V' - V = 1.71875 cm^3
And the percent volume change is:
% volume change = (ΔV / V) x 100% = (1.71875 cm^3 / 100 cm^3) x 100% = 1.71875%.
For such more questions on Poisson's ratio:
https://brainly.com/question/14946078
#SPJ11
Answer this question without using numbers from the book (or anywhere else!)ΔS for the following reaction is negative. True or false?H2(g) + I2(s) => 2 HI(g)
The given statement about ∆S for the reaction between hydrogen and iodine gas will be negative is false.
Entropy is represented with the letter S. It is thermodynamic property associated with system. It describes the disorder or randomness of the system.
The above mentioned chemical reaction indicates two individual moles of molecules on Left Hand Side and 2 moles of hydrogen iodide gas. It makes the overall number of moles to be same, which will not change the entropy of the reaction.
The increase in number of moles would have been resulted in positive entropy and vice versa.
Learn more about entropy -
https://brainly.com/question/419265
#SPJ4
Does temperature have an effect on the solubility of organic solids in a solvent? Explain why or why not.
Yes, temperature does have an effect on the solubility of organic solids in a solvent. As temperature increases, the solubility of organic solids generally increases as well.
Effect of temperature on solubility of organic solids in a solvent is as follows :-
Generally, the solubility of organic solids in a solvent increases with increasing temperature. This is because as temperature increases, the kinetic energy of the particles in the solvent increases, making them more likely to break apart the bonds in the solid and dissolve it.
However, this relationship may not hold true for all organic solids, as some may have a decrease in solubility at higher temperatures due to changes in their molecular structure. Additionally, the type of solvent used can also affect the solubility- for example, some solvents may have a higher solubility for organic solids at lower temperatures.
Learn more about effect of temperature on solubility : https://brainly.com/question/17071337
#SPJ11
which of the following options correctly describe sp hybrid orbitals? select all that apply. multiple select question. an sp-hybridized atom has one unhybridized p orbital in its valence shell. the angle between two sp hybrid orbitals is 90o. the combination of one s and one p orbital results in the formation of one sp hybrid orbital. the energy of an sp hybrid orbital lies between the energies of the original s and p orbitals that were mixed. each sp hybrid orbital has one large and one small lobe.
The correct options that describe sp hybrid orbitals are:- The combination of one s and one p orbital results in the formation of one sp hybrid orbital, - The energy of an sp hybrid orbital lies between the energies of the original s and p orbitals that were mixed. and - Each sp hybrid orbital has one large and one small lobe.
An sp-hybridized atom has one unhybridized p orbital in its valence shell. The angle between two sp hybrid orbitals is 180° (not 90°). The combination of one s and one p orbital results in the formation of two sp hybrid orbitals. The energy of an sp hybrid orbital lies between the energies of the original s and p orbitals that were mixed. Each sp hybrid orbital has one large and one small lobe.
More on sp hybrid: https://brainly.com/question/25130979
#SPJ11
What is the oxidation state that alkali metals ionize to?
All alkali metals are in the +1 oxidation state when they ionise. For instance, sodium (Na) loses an electron to generate Na+ with an oxidation state of +1 when it combines with chlorine (Cl) to form sodium chloride (NaCl), whereas Cl acquires an electron to become Cl- with an oxidation state of -1.
Lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr) are examples of alkali metals. These extremely reactive metals easily shed their outermost electron to create a cation with a positive charge. An element's oxidation state, commonly referred to as the oxidation number, is a measurement of how many electrons the element has received or lost as it transforms into a compound or ion.
Alkali metals typically lose their one valence electron to create a cation with a positive charge because they have one valence electron in their outermost shell.
Although less frequent and less stable than their +1 oxidation state, some alkali metals, including potassium and cesium, can form cations with a +2 oxidation state under specific circumstances. Alkali metals tend to shed their outermost electron to form a cation with a +1 oxidation state and are often very reactive.
To know more about the alkali metals refer here :
https://brainly.com/question/18153051#
#SPJ11
What colour is the flame before adding any metals?
The Flames have the three zones first outermost zone which has light blue in color, second is yellow in the color and the third one is black in the color.
The Flame which is the visible gaseous part of the fire. The flame of the color that will depends on the temperature, the types of the fuel used and the completeness of the combustion. It consist of different zones.
The outermost part of the flame, is the light blue in color. The middle layer, will consists of the part of the flame which is mostly yellowish to the orange in the color. The last and the least hot region is mostly black in the color.
To learn more about flame here
https://brainly.com/question/625422
#SPJ4
