When substances react spontaneously with oxygen giving off heat and light, the heat released fuels and makes the process further violent and rapid. It is at the gaseous state all burnable substances be reduced to burn in air.
The process in which a substance burns in the presence of oxygen to produce heat and light is defined as combustion. When the reaction occurs in the presence of abundant oxygen, the substance burns in oxygen to the maximum extent.
Combustion resulting in fire can only occur between gases. The fuels in liquid and solid states must be vaporised to be a flame.
To know more about Combustion, visit;
https://brainly.com/question/14335621
#SPJ4
Explain how the extrusion force decreases as the billet gets shorter in the direct extrusion
process. Does the forces change during the indirect extrusion process as a function of the
unextruded billet length? Why?
In the direct extrusion process, the extrusion force decreases as the billet gets shorter. This is because as the billet is extruded, the metal undergoes plastic deformation and its cross-sectional area decreases. This reduction in cross-sectional area results in a decrease in the amount of material that needs to be extruded, which in turn leads to a decrease in the extrusion force required.
On the other hand, in the indirect extrusion process, the extrusion force does not change as a function of the unextruded billet length. This is because the extrusion force is generated by the pressure exerted on the billet by the ram, and this pressure is independent of the length of the billet. However, the force required to push the extruded material out of the die may increase as the unextruded billet length decreases, due to the increase in friction between the die and the extruded material.
To know more about direct extrusion process
https://brainly.com/question/31578942?
#SPJ11
Can you install Socket AM2 to AM2+ processors in Sock AM3 motherboards?
Yes, you can install Socket AM2 and AM2+ processors on a Socket AM3 motherboard, but you'll need to ensure the motherboard's BIOS supports the specific processor you're using.
How can we explain this?
1. Check the motherboard's supported processor list: Visit the manufacturer's website and find the CPU support list for your specific Socket AM3 motherboard. Make sure your Socket AM2 or AM2+ processor is listed.
2. Update the BIOS if necessary: If your processor is supported, make sure your motherboard has the latest BIOS version to ensure compatibility. Follow the manufacturer's instructions to update the BIOS.
3. Install the processor: Turn off and unplug your computer. Open the case and locate the Socket AM3 CPU socket on the motherboard. Lift the retention arm, carefully align the processor's pins with the socket, and gently place it into the socket. Lower the retention arm to secure the processor.
4. Apply thermal paste and install the CPU cooler: Apply a small amount of thermal paste to the processor's surface. Attach the CPU cooler according to the cooler's instructions, making sure it's securely fastened.
5. Reassemble the computer: Close the case, plug in the computer, and turn it on. Verify that the processor is detected in the BIOS and functions properly.
Remember that using an AM2 or AM2+ processor on an AM3 motherboard may result in limited features or performance compared to using an AM3 processor.
to know more about thermal :
https://brainly.com/question/20885658
#SPJ11
Can concrete on metal decking system be cut?
Yes, concrete on metal decking systems can be cut. To do this, follow these steps:
1. Mark the cutting lines on the concrete surface with chalk or a suitable marker, following the desired pattern or dimensions.
2. Use a concrete saw or a circular saw with a diamond-tipped blade specifically designed for cutting concrete. Make sure to wear appropriate safety gear, such as gloves, eye protection, and a dust mask.
3. Adjust the saw blade's depth to match the thickness of the concrete layer, ensuring that it will not cut through the metal decking underneath.
4. Carefully cut along the marked lines, maintaining a steady pace to avoid chipping or cracking the concrete. Periodically pause to let the saw cool down and remove dust from the cutting area.
5. Once the concrete cuts are complete, clean the area to remove any dust or debris.
Remember, when cutting concrete on a metal decking system, it's crucial to avoid damaging the metal deck underneath to maintain the structural integrity of the overall system.
to know more about concrete:
https://brainly.com/question/28903866
#SPJ11
9. How many extra sprinkler heads are required for a 200 head system?
50 extra sprinkler heads are required for a 200 head system. If you have 300 sprinklers or fewer, the NFPA 13 recommends that you keep no fewer than six extra heads.
Depending on the number of real sprinkler heads in your building, you may require more spare sprinkler heads for your business. According to the NFPA 13, you should keep no less than six extra sprinkler heads if you have 300 or fewer, no less than 12 if you have 300 to 1,000 sprinklers, and no less than 24 if you have more than 1,000 sprinklers.
The temperature of the cabinet where you store these sprinkler heads shouldn't go beyond 100 degrees.
Learn more about sprinkler heads here:
https://brainly.com/question/4997299
#SPJ1
_______________________ provides application services to a network. An important, and often-misunderstood, concept is that end-user applications (for example, Microsoft Word) do not reside at the application layer.
The blank space should be filled with "The Application Layer of the OSI model" or "The Application Layer of the TCP/IP protocol stack". The Application Layer of the OSI (Open Systems Interconnection) model,
or the Application Layer of the TCP/IP (Transmission Control Protocol/Internet Protocol) protocol stack, provides application services to a network. It is the topmost layer in both the OSI model and the TCP/IP protocol stack, and it is responsible for enabling communication between end-user applications and the underlying network.
End-user applications, such as Microsoft Word, do indeed reside at the application layer. The application layer provides a variety of services, such as email, file transfer, web browsing, and remote access, which are used by end-user applications to communicate over a network. These applications rely on the services provided by the application layer to establish connections, exchange data, and perform other network-related tasks.,
learn more about Application here:
https://brainly.com/question/31164894
#SPJ11
________________________ is responsible for setting up, maintaining, and tearing down sessions.
In computer networking, the Session layer of the OSI model is responsible for setting up, maintaining, and tearing down sessions. The Session layer is the fifth layer of the OSI model and provides services that enable two applications on different devices to establish, use, and terminate a connection, or session, between them.
The Session layer is responsible for managing the dialogue between the two applications, including establishing and ending a session, checkpointing and restoring a session, and handling exceptions and errors that may occur during the session. The Session layer also provides services such as synchronization, which ensures that the data sent by one application arrives in the correct order at the other end.
Examples of protocols that operate at the Session layer include NetBIOS, RPC (Remote Procedure Call), and SIP (Session Initiation Protocol).
learn more about OSI model here:
https://brainly.com/question/30544746
#SPJ11
Pontoon type floating roofs shall have suffiecient buoyancy to remain afloat on a liquid with a specific gravity of
A) 1.0
B) .87
C) .85
D) .70
Question: "Pontoon type floating roofs shall have sufficient buoyancy to remain afloat on a liquid with a specific gravity of:"
Pontoon type floating roofs shall have sufficient buoyancy to remain afloat on a liquid with a specific gravity of A) 1.0.
Learn more about sufficient buoyancy: https://brainly.com/question/28464280
#SPJ11
which type of cloud deployment model uses both public and private clouds, allowing you to run workloads on either cloud deployment models, and having them work seamlessly together?Select an answer:publicprivateremotehybrid
A hybrid cloud combines both public and private clouds, allowing you to run workloads on either deployment model while having them work seamlessly together.
The cloud deployment model that uses both public and private clouds, allowing you to run workloads on either cloud deployment model and having them work seamlessly together is called a hybrid cloud deployment. A hybrid cloud is a mixed computing environment where applications are run using a combination of computing, storage, and services in different environments—public clouds and private clouds, including on-premises data centres or “edge” locations.
Learn more about hybrid cloud here :
https://brainly.com/question/30784382
#SPJ11
Team members leave the project without telling you, best to create what for second half of project:WBWResource HistogramRACIStaffing mgmt plan
If team members are leaving the project without informing you, it is important to create a staffing management plan to ensure that the project can continue without major disruptions.
A staffing management plan is important to ensure that the project can continue without major disruptions. This plan should include a WBW (Who Does What) chart that clearly outlines the roles and responsibilities of each team member, as well as a resource histogram that shows the availability of each team member and their workload. In addition, a RACI chart (Responsible, Accountable, Consulted, Informed) can help ensure that everyone understands their roles and responsibilities and that communication channels are clear. By creating a comprehensive staffing management plan, you can mitigate the risks associated with team members leaving the project unexpectedly and ensure that the project stays on track.
Learn more about RACI chart here :
https://brainly.com/question/29762240
#SPJ11
When does a GCU switch the starter to gen mode
Answer:
A GCU (Generator Control Unit) typically switches the starter to gen mode once the generator has reached the correct speed and voltage to generate electricity. This is usually monitored by sensors that detect the speed and voltage of the generator, and once these parameters reach the required levels, the GCU will automatically switch the starter to gen mode.
The exact timing of the switch from starter to gen mode can vary depending on the specific design and configuration of the generator system, as well as the specific application and load requirements. However, in general, the switch from starter to gen mode is typically made as soon as possible after the generator has reached the required speed and voltage to ensure that the generator is producing power efficiently and reliably.
Summarize the arguments for and against side-effect-free programming.
Side-effect-free programming refers to the practice of writing code that does not produce any unintended side effects. There are several arguments for and against this approach to programming.
For such more question on predictable
https://brainly.com/question/1802381
#SPJ11
A Tesla Model S Plaid has 1020 Peak Horsepower and a 99.3 kW-hr 400 Volt battery pack. How long can it maintain peak power output and still maintain 10% total charge? Give your answer in minutes.
The Tesla Model S Plaid can operate at its maximum power for 47 seconds, or roughly 0.78 minutes, while still having 10% of its complete charge remaining.
What is the time?The battery capacity must first be changed from kW-hr to watt-hours:
1000 × 99.3 kW-hr =99,300 watt-hours.
The quantity of total energy consumed by the vehicle over the course of a set period of time must then be determined. The formula is as follows:
Power + Time = Energy
where:
time is measured in hours
power in watts
energy is measured in watt-hours.
The peak power must be changed from horsepower to watts:
746 watts per horsepower / 1020 peak horsepower = 761,520 watts.
The formula can now be rearranged to solve for time:
Time = Power / Energy
Time = (0.1 99,300 watt-hours) / 761,520 watts.
Time = 0.013 hours or 0.78 minutes.
Therefore, the Tesla Model S Plaid can maintain peak power output for 0.78 minutes.
Learn more about time here:https://brainly.com/question/26046491
#SPJ1
Explique las diferencias más importantes entre una tinción con azul de lactofenol y una tinción de Gram. Describa las diferencias brevemente a través de una tabla comparativa
Las diferencias de la tinción de azul de lactofenol y tinción de Gram son que ambas se utilizan en microbiología para visualizar y diferenciar las células bacterianas.
¿Qué diferencias tienen la tinción con azul de lactofenol y tinción de Gram?De acuerdo con la información, podemos distinguir las siguientes diferencias entre la tinción con azul de lactofenol y tinción de Gram:
El objetivo de la tinción con azul de lactofenol se enfoca en la observación de la morfología celular y estructuras de hongos y levadura, mientras la tinción de Gram es para las bacterias en gram positivas y gram negativas.El color de las tinción con azul de lactofenol es azul mientras que la tinción de Gram es morado y rojizo.En resumen, la tinción con azul de lactofenol es una técnica utilizada para la observación de hongos y levaduras, mientras que la tinción de Gram es una técnica diferencial utilizada para diferenciar bacterias en gram positivas y gram negativas.
Aprenda más sobre bacterias en: https://brainly.com/question/8008968
#SPJ1
Does the pressurization system require DC or AC power to operate?
The pressurization system in an aircraft typically requires DC power to operate this is because the primary power source for most aircraft systems, including the pressurization system, is provided by the aircraft's electrical system, which runs on DC power.
However, some aircraft may also have backup or auxiliary power sources that run on AC power, which can be used in the event of a power failure. The electrical system in an aircraft runs on DC (direct current) power, which is provided by the aircraft's batteries and/or generators. DC power is used because it is more reliable and easier to control than AC (alternating current) power, which can cause interference with sensitive electronic equipment.
Learn more about pressurization system: https://brainly.com/question/15301106
#SPJ11
Given the following while loop, what is the value assigned to variable z for the given values of variables a, b and c?
mult = 0
while a < 10:
mult = b * a
if mult > c:
break
a = a + 1
z = a
1) a = 4, b = 5, c = 20
For the given values of a = 4, b = 5, and c = 20, the while loop will execute as follows:
- On the first iteration, mult will be assigned the value 20 (since 4 * 5 = 20), but since 20 is not greater than c, the loop will continue.
- On the second iteration, mult will be assigned the value 25 (since 5 * 5 = 25), but since 25 is greater than c, the break statement will be executed and the loop will terminate.
- At the end of the loop, the value of a will be 5, since it was incremented by 1 after the loop condition was checked but before z was assigned. Therefore, z will be assigned the value of 5.
In conclusion, for the given values of a, b, and c, the value assigned to variable z will be 5.
Learn more about while loop: https://brainly.com/question/19344465
#SPJ11
At Layer 3, three common switching techniques exist, what are they?
At Layer 3 of the OSI (Open Systems Interconnection) model, which is the network layer responsible for routing and forwarding data packets between different networks, three common switching techniques are:
Packet switching: In packet switching, data is divided into smaller packets, each with its own header that contains addressing information. These packets are then individually routed across the network to their destination using the most appropriate path. Packet switching allows for efficient utilization of network resources and enables different packets to take different paths to reach their destination, which can improve network efficiency and fault tolerance.
Datagram switching: Datagram switching is a connectionless switching technique where each packet (datagram) is independently routed based on the destination address in its header. Each datagram can take a different path to reach its destination, and there is no need to establish a connection or maintain state information. Datagram switching is commonly used in IP (Internet Protocol) networks, where each packet is treated independently and routed dynamically based on routing tables.
Virtual circuit switching: Virtual circuit switching is a connection-oriented switching technique where a pre-established path, known as a virtual circuit, is established between the source and destination nodes before data transfer. Once the virtual circuit is set up, data packets follow the same path for the duration of the session. Virtual circuit switching requires the establishment and maintenance of a connection state, and it can provide guaranteed quality of service (QoS) and reliable communication, but it may be less flexible and less efficient in terms of resource utilization compared to packet switching.
These three switching techniques are commonly used in networking protocols and devices at Layer 3 to route and forward data packets across networks, and each has its advantages and trade-offs depending on the requirements of the network and the applications being used.
learn more about OSI here:
https://brainly.com/question/25404565
#SPJ11
What factors determine the selection of security controls in terms of overall budget?
The available budget plays a critical role in determining which security controls can be implemented. Organizations must balance their security needs against their financial limitations to select the most effective and cost-efficient controls.
When determining the selection of security controls in terms of overall budget, there are several factors that come into play. Firstly, the level of risk associated with the organization's assets, systems and data should be assessed. This helps to identify the type and level of controls that are necessary to mitigate the risks. Additionally, compliance requirements and industry standards should also be considered, as they may dictate specific controls that must be implemented. The size and complexity of the organization's IT infrastructure also influences the selection of security controls, as larger environments may require more advanced and sophisticated controls. Lastly, the available budget plays a critical role in determining which security controls can be implemented. Organizations must balance their security needs against their financial limitations to select the most effective and cost-efficient controls.
Learn more about security controls here
https://brainly.com/question/14783869
#SPJ11
CPU and the RAM need some connection so they can talk to each other, What is this?
Answer:
The connection between the CPU (Central Processing Unit) and RAM (Random Access Memory) is called the front-side bus (FSB). The FSB is a data bus that carries data between the CPU and the memory controller hub, which is responsible for managing communication between the RAM and other components in the computer. The speed of the FSB can affect the overall performance of the computer, as it determines how quickly data can be transferred between the CPU and RAM.
Explanation:
Project has several teams. Team C repeatedly missed deadlines. Team D had to crash schedule several times, as leader for them you should meet with
As the leader for Team D, it would be wise to schedule a meeting with Team C to address the repeated missed deadlines. It is important to communicate the impact of their delays on the entire project and discuss potential solutions to ensure that all teams can stay on schedule.
Additionally, it may be beneficial to review the project timeline and schedule with both teams to ensure that everyone is aware of upcoming deadlines and can plan accordingly.As a leader of Team D, if you are facing repeated missed deadlines by Team C, it would be beneficial to schedule a meeting with the leader or members of Team C to discuss the issues and identify potential solutions.During the meeting, it's important to approach the situation in a constructive and non-judgmental manner, focusing on the underlying causes of the problem rather than placing blame or pointing fingers. You can start the conversation by expressing your concerns about the missed deadlines and how it's impacting the overall project timeline and the workload of other teams, including Team D.
To learn more about project click the link below:
brainly.com/question/14055197
#SPJ11
What is the benefit of Single- and Double-Tee precast concrete?
The benefits of Single-Tee and Double-Tee precast concrete are as follows:
Single-Tee precast concrete provides:
1. Structural efficiency: Single-Tee precast concrete components have a high strength-to-weight ratio, allowing them to efficiently span long distances with minimal support.
2. Speed of construction: Since Single-Tee precast concrete is manufactured off-site and delivered ready for installation, it can speed up the construction process.
3. Reduced labor costs: The prefabrication of Single-Tee precast concrete components reduces on-site labor costs.
Double-Tee precast concrete provides:
1. Greater load capacity: Double-Tee precast concrete components have two parallel stems, which significantly increase their load-carrying capacity compared to Single-Tee precast components.
2. Larger span capability: Double-Tee precast concrete is designed to span even greater distances than Single-Tee precast components, making it suitable for larger projects such as parking structures and industrial buildings.
3. Improved durability: Double-Tee precast concrete is highly resistant to wear and tear, and it maintains its structural integrity even in harsh environments.
In summary, Single-Tee and Double-Tee precast concrete offer benefits such as structural efficiency, speed of construction, reduced labor costs, greater load capacity, larger span capability, and improved durability.
To know more about Single-Tee and Double-Tee precast
https://brainly.com/question/14722270?
#SPJ11
What type of programming practice defends against injection-style attacks, such as inserting SQL commands into a database application from a site search form?
The programming practice that defends against injection-style attacks like SQL injection is called "input validation" or "sanitization."
This involves checking and cleaning user input before it's used in SQL queries or other parts of a program. Steps to prevent SQL injection include:
1. Validating user input: Ensure that the input data is of the expected format, length, and type.
2. Using prepared statements: Instead of dynamically building SQL queries, use prepared statements with placeholders for user-supplied data.
3. Escaping user input: Use functions like `mysql_real_escape_string()` to escape any potentially dangerous characters in user input.
4. Limiting privileges: Restrict database permissions for your application's database user to the minimum required level.
5. Regularly updating software: Keep your database software and programming language libraries up to date to address known security vulnerabilities.
To know more about sanitization
https://brainly.com/question/5475985?
#SPJ11
How is nose wheel steering actuated
Modern aeroplanes have hydraulic or electric power to turn the nose wheel.
In hydraulic systems, the pilot's steering inputs open a control valve, which sends fluid from the hydraulic system to the nose wheel steering actuators, moving and turning them.
The pilot's steering input, which is normally accomplished using a hand-operated steering wheel or pedals, determines the volume of fluid delivered to the actuators. In order for the pilot to feel the resistance of the nose wheel against the ground, the system also has a feedback mechanism.
Learn more about nose wheel steering, here:
https://brainly.com/question/29557130
#SPJ4
how do we perceive a pole that partially covers a wall?
We perceive a pole that partially covers a wall, we can break it down into the following steps:
1. First, our eyes receive the visual information of the scene, which includes the wall and the pole.
2. Next, our brain processes this information and recognizes the two distinct objects - the wall and the pole.
3. Then, our brain interprets the spatial relationship between the objects, determining that the pole is in front of the wall and partially covering it.
4. Finally, our perception is formed, and we understand that we are seeing a pole partially covering a wall.
In summary, we perceive a pole that partially covers a wall by receiving visual information, processing it in our brain, and interpreting the spatial relationship between the objects.
To know more about wall
https://brainly.com/question/7667177?
#SPJ11
A multiple position qualification with the axis of the pipe 45° to the horizontal; welding shall be done without rotating the pipe. This is a description of which welder qualification position?
A) 1G
B) 2G
C) 5G
D) 6G
Hi!
Your question is about a multiple position qualification with the axis of the pipe at 45° to the horizontal, and welding shall be done without rotating the pipe. This is a description of welder qualification position 6G. Your answer: D) 6G.
Learn more about position qualification: https://brainly.com/question/28238260
#SPJ11
1. How effective have sprinklers been as a suppression system? (most complete answer)
Sprinkler systems experience a 60% reduction in the loss of life and a 75% reduction in property damage compared to buildings without sprinkler systems.
In addition to reducing the risk of fire-related injuries and deaths, sprinkler systems can also help to minimize the impact of fire on the environment and reduce the costs associated with fire damage.
Overall, sprinkler systems are considered to be one of the most effective fire suppression systems available and are often required by building codes and regulations in order to help ensure the safety of building occupants and reduce the risk of fire-related damage and losses.
Learn more about Sprinkler systems, here
https://brainly.com/question/30777999
#SPJ4
Why is it vital to ensure the security of an organization's DNS?
It is vital to ensure the security of an organization's DNS because the DNS (Domain Name System) plays a crucial role in the accessibility and overall functionality of a network. Ensuring its security helps to protect against cyber threats, maintain the integrity of the organization's online presence, and safeguard sensitive information. Here's a step-by-step explanation:
1. The DNS translates human-friendly domain names into IP addresses that computers can understand. A secure DNS ensures that users can reliably access websites and services without interference.
2. Cyber threats like DNS hijacking, cache poisoning, and Distributed Denial of Service (DDoS) attacks target DNS vulnerabilities. Securing the DNS helps to prevent such attacks and protects the organization's reputation and customer trust.
3. A compromised DNS can lead to redirection of web traffic to malicious websites, putting users at risk of phishing and malware infections. Ensuring DNS security helps to safeguard sensitive data and user privacy.
4. An insecure DNS can cause downtime and disrupt the organization's operations. By maintaining a secure DNS, organizations can ensure the availability of their online services and minimize potential revenue loss.
5. Implementing DNS security measures, such as DNSSEC (Domain Name System Security Extensions) and secure access controls, helps to create a robust defense against cyber attacks and ensures a safer online environment for both the organization and its users.
To know more about DNS
https://brainly.com/question/30408285?
#SPJ11
What color is the sealing element in MegaPressG fittings?
The sealing element in MegaPressG fittings is black. This is because the sealing element is made of a specialized EPDM (ethylene propylene diene monomer) material that is specifically designed to provide a reliable, leak-proof seal in high-pressure piping applications.
The black color of the sealing element is not just a cosmetic choice; it is an intentional design feature that helps to ensure that the seal is secure and effective.In addition to its color, the sealing element in MegaPressG fittings is also notable for its durability and resistance to heat, chemicals, and other potentially damaging environmental factors. This makes it a reliable choice for a wide range of industrial and commercial piping applications, including HVAC systems, process piping, and more.Overall, the black color of the sealing element in MegaPressG fittings is just one small part of a larger, carefully engineered product that is designed to provide superior performance and reliability in a variety of demanding environments. Whether you are installing a new piping system or replacing an old one, MegaPressG fittings are a smart choice for ensuring that your system is leak-free, efficient, and reliable.For such more question on intentional
https://brainly.com/question/30986873
#SPJ11
10. When may the sprinklers at a fire be shut down?
The sprinkler system at a fire should only be shut down in very specific situations and as a last resort, as it can greatly increase the risk of fire damage and injuries to occupants.
The only time the sprinkler system should be shut down is if it is necessary to control or extinguish the fire. This may be necessary if the fire department needs to use a large amount of water to extinguish the fire, which may exceed the capacity of the sprinkler system or if the sprinkler system is malfunctioning and causing a safety hazard.
In general, however, shutting down the sprinkler system during a fire emergency is not recommended, as it can greatly increase the risk of fire damage and injuries to occupants.
Learn more about sprinkler system, here
https://brainly.com/question/30777999
#SPJ4
What vulnerabilities does a rogue DHCP server expose users to?
A rogue DHCP server exposes users to the following vulnerabilities:
1. Incorrect network configuration: A rogue DHCP server can provide incorrect IP addresses, subnet masks, and default gateways, which may lead to a loss of connectivity for the affected devices.
2. Man-in-the-middle attacks: By providing a malicious default gateway or DNS server, the rogue DHCP server can intercept and manipulate the traffic between the user and the intended destination, gaining access to sensitive information or injecting malicious content.
3. Denial of Service (DoS): A rogue DHCP server can exhaust the IP address pool by issuing all available IP addresses, preventing legitimate devices from obtaining valid IP configurations.
4. Network access control bypass: In networks with security measures in place, a rogue DHCP server can bypass these controls by providing unauthorized access to network resources.
To mitigate these vulnerabilities, network administrators should implement DHCP snooping, which inspects DHCP messages on the network and prevents unauthorized DHCP servers from operating.
To know more about DHCP
https://brainly.com/question/29432103?
#SPJ11
How do the actual dimension and nominal dimension of CMUs relate?
Note that CMUs also known as Concrete Mansory units are usually smallter that the regular or nominal dimensions.
What are CMUs used for?Note that CMUs are precast products that are created form plain concrete to be used for the construction of wall that will bear or carry loads.
The nominal dimensions of CMUs are the required size of the CME while the actual dimension is the size after the unit has been manufactured and or allowed to cure.
Hence, it is correct to state that CMUs also known as Concrete Mansory units are usually smaller that the regular or nominal dimensions.
Learn more about CMUs at:
https://brainly.com/question/31078717
#SPJ1
