88) How much calcium is contained in 35.0 g of calcium fluoride?A) 1.99 gB) 7.70 gC) 15.0 gD) 18.0 g

The magnitude of the elevator's acceleration is 1.63 m/s².

The weight of an object is the force with which it is attracted to the center of the Earth due to gravity. On solid ground, your weight is equal to your mass times the acceleration due to gravity (g), which is approximately 9.81 m/s². Therefore, your mass would be;

mass = weight / g = 151 lb / (9.81 m/s² × 2.2046 lb/kg)

≈ 68.49 kg

In the elevator, your apparent weight is different because the elevator is accelerating. The force acting on you in the elevator is the sum of your weight and the force due to the acceleration of the elevator, which is given by;

force = mass × (g + acceleration)

When the elevator is moving upward with an acceleration a, your apparent weight is;

131 lb = mass × (g + a)

Substituting the value of mass, we get;

131 lb = 68.49 kg × (9.81 m/s² + a)

Solving for a, we get;

a = (131 lb / 68.49 kg - 9.81 m/s²)

≈ 1.63 m/s²

To know more about magnitude here

https://brainly.com/question/28173919

#SPJ4

--The given question is incomplete, the complete question is

"When you weigh yourself on good old terra firma (solid ground), your weight is 151 lb. In an elevator your apparent weight is 131 lb . What is the magnitude of the elevator's acceleration?"--

The molecule has 5 electron domains, including 3 bonded atoms and 2 lone pairs. The ideal bond angle for this arrangement is 90 degrees. The hybridization of the central atom is sp3d.

The molecule with three bonded atoms and two lone pairs, and an electron domain of 5 is trigonal bipyramidal.

The ideal bond angle for a trigonal bipyramidal molecule is 90° between the axial positions and 120° between the equatorial positions.

The hybridization for this molecule is sp3d.

The polarity of the molecule depends on the electronegativity of the atoms and their arrangement in space. If the bonded atoms are identical and the lone pairs are symmetrically arranged, the molecule will be nonpolar.

Click the below link, to learn more about Geometry of molecule:

https://brainly.com/question/29224615

#SPJ11

The mass of 3.45 mol of [tex]Li_{2}O[/tex] is 103.08 grams.

To find the mass of 3.45 mol of [tex]Li_{2}O[/tex], you'll need to use the molar mass of [tex]Li_{2}O[/tex] and the given number of moles.

Step 1: Determine the molar mass of [tex]Li_{2}O[/tex].

The molar mass of Li2O (lithium oxide) can be calculated by adding the atomic masses of two lithium atoms and one oxygen atom.

The molar mass of lithium (Li) is 6.94 g/mol, and the molar mass of oxygen (O) is 16.00 g/mol. Since there are 2 lithium atoms in [tex]Li_{2}O[/tex], the molar mass of [tex]Li_{2}O[/tex] is (2 x 6.94) + 16.00 = 29.88 g/mol.

Step 2: Multiply the number of moles (3.45 mol) by the molar mass of [tex]Li_{2}O[/tex] (29.88 g/mol) to find the mass.

Mass = (3.45 mol) x (29.88 g/mol) = 103.08 g

To know more about Stoichiometry Calculations:

https://brainly.com/question/29424807

#SPJ11

An electrochemical cell is the type of the primary system for the study of the electrochemical reactions.

The electrochemical cell is the type of the primary system for the study of the electrochemical reactions. The electrochemical cell is the type of the device that is capable of the either generating the electrical energy from the chemical reactions that is the electrical energy that is to cause the chemical reactions.

The Electrochemical cells are the generally consist of the cathode and the anode. The Electrochemical Cells are the  two half-cells, and the each consisting of the electrode that is dipped in the electrolyte.

To learn more about electrochemical cell here

https://brainly.com/question/29486711

#SPJ4

the molar mass of the unknown diprotic acid will be 47.11 g/mol using the formula of the given acids i.e., sodium hydroxide & acid.

To solve this problem, we need to use the formula:
moles of acid = moles of base
First, let's calculate the number of moles of NaOH used:
moles of NaOH = concentration of NaOH x volume of NaOH used
moles of NaOH = 0.148 M x 0.01095 L
moles of NaOH = 0.0016254 mol

Since the acid is diprotic, it will require twice the number of moles of NaOH to neutralize both protons. Therefore, the number of moles of the unknown diprotic acid can be calculated as:
moles of acid = 2 x moles of NaOH
moles of acid = 2 x 0.0016254 mol
moles of acid = 0.0032508 mol

Now, we can use the formula for molar mass:
molar mass = mass of the acid/moles of the acid
The mass of the acid is given as 0.1532 g:
molar mass = 0.1532 g / 0.0032508 mol
molar mass = 47.11 g/mol

learn more about molar mass here

https://brainly.com/question/837939

#SPJ11

The approximate atmospheric concentration of [tex]c0^{2}[/tex] at year 0 was 275 parts per million (ppm). among the following options given.

It is difficult to determine the exact atmospheric concentration of[tex]Co^{2}[/tex] at year 0, as accurate measurements were not taken at that time. However, based on ice core samples, it is estimated that the atmospheric concentration of carbon dioxide was around 255 parts per million at the start of the Industrial Revolution in the mid-18th century. It has since increased significantly to approximately 415 parts per million in 2021. Therefore, the options of 900 parts per billion and 255 parts per billion are not accurate, while 255 parts per million and 275 parts per million are more reasonable estimates. Parts per million (ppm), parts per billion (ppb), and parts per trillion (ppt) by volume are the units used to measure concentrations of these greenhouse gases. To put it another way, a gas with a concentration of one part per billion (ppb) contains one molecule for every one billion molecules of air.

learn more about atmospheric concentration of carbon dioxide here

https://brainly.com/question/431949

#SPJ11

Rowlandson's primary source of revenue came from his satirical prints.

He created social and political satires and occasionally modified the works of older painters like William Hogarth. Prints with satire were either sold uncolored or with watercolours added by professionals who painted prints as a career.

Social criticism in literature sometimes takes the form of satire. To make fun of a particular leader, a social habit or tradition, or any other well accepted social person or practise that they want to comment on and bring into question, writers utilise hyperbole, irony, and other literary strategies.

This is the satire's sharpest point. Political satire is now often amused. He returns with his razor-sharp political humour and the podcasts.

learn more about satirizing

https://brainly.com/question/1323648

#SPJ1

To calculate the new volume of a balloon when the temperature drops, use the formula [tex]V2 = V1(T2/T1)[/tex]. The new volume is 2.34 L.

To compute the new volume of a gas when the temperature transforms, we want to utilize the ideal gas regulation, which expresses that [tex]PV = nRT[/tex], where P is the strain of the gas, V is its volume, n is the quantity of moles, R is the all inclusive gas steady, and T is the outright temperature. We can accept that the strain and number of moles of the gas stay consistent.

Nonetheless, in this issue, we are given the volume and temperature of an inflatable, which suggests that the gas inside is certainly not an optimal gas. In any case, we can involve the ideal gas regulation as an estimation since the gas is near ideal circumstances.

To tackle for the new volume, we can utilize the recipe [tex]V2 = V1(T2/T1)[/tex], where V1 is the underlying volume, T1 is the underlying temperature, T2 is the last temperature, and V2 is the last volume we are attempting to find.

Subbing the given qualities, we get:

[tex]V2 = 2.50 L * (284.15 K/303.15 K) = 2.34 L[/tex]

Hence, on the off chance that the temperature decreases from 30.0∘C to 11.0∘C, the volume of the inflatable would diminish from 2.50 L to 2.34 L. The recipe to utilize is [tex]V2 = V1(T2/T1)[/tex], which relates the underlying volume and temperature to the last volume and temperature utilizing a consistent proportion.

To learn more about an example of balloon temperature drop, refer:

https://brainly.com/question/21902585

#SPJ4

Cobalt ion in Co2O3 has a charge of +3, which is answer choice D.

The charge on the Co ions in Co2O3 can be determined by first determining the charge on the oxygen ions and then using that information to find the charge on the cobalt ions. Oxygen has a charge of -2 in most compounds, so the three oxygen ions in Co2O3 would have a total charge of -6.

Since the overall charge of the compound is neutral, the two cobalt ions must have a combined charge of +6 to balance out the -6 charge from the oxygen ions. Therefore, each cobalt ion in Co2O3 has a charge of +3, which is answer choice D.

To know more about Cobalt ion refer here:

https://brainly.com/question/28944129

#SPJ11

Answer:

The pH of the solution formed is approximately 12.614.

Explanation:

First, we need to calculate the molarity of the Ba(OH)₂ solution:

moles of Ba(OH)₂ = mass / molar mass = 3.470 g / (137.327 g/mol + 2*15.9994 g/mol) = 0.01156 mol

molarity = moles / volume = 0.01156 mol / 0.5631 L = 0.02055 M

Ba(OH)₂ is a strong base, and it will dissociate completely in water to give two OH⁻ ions for every Ba(OH)₂ molecule:

Ba(OH)₂ → Ba²⁺ + 2OH⁻

So the concentration of OH⁻ ions in the solution is 2 * 0.02055 M = 0.0411 M.

Now we can use the equation for the ion product constant of water to calculate the pH of the solution:

Kw = [H⁺][OH⁻] = 1.0 x 10⁻¹⁴

pH + pOH = 14.00

pOH = -log[OH⁻] = -log(0.0411) = 1.386

pH = 14.00 - pOH = 14.00 - 1.386 = 12.614

Therefore, the pH of the solution formed is approximately 12.614.

Thus, the minimum concentration of Cl- required to begin precipitating PbCl2 is approximately 5.41 x 10^-4 M.

To find the minimum concentration of Cl- required to begin precipitating PbCl2 from a 0.025M Pb2+ solution, we'll use the solubility product constant (Ksp) formula for PbCl2, which is Ksp = [Pb2+][Cl-]^2. The Ksp for PbCl2 is given as 1.17 x 10^-5.

Step 1: Write the Ksp expression:
Ksp = [Pb2+][Cl-]^2

Step 2: Plug in the given values:
1.17 x 10^-5 = (0.025)[Cl-]^2

Step 3: Solve for [Cl-]^2:
[Cl-]^2 = (1.17 x 10^-5) / 0.025

Step 4: Calculate [Cl-]^2:
[Cl-]^2 = 4.68 x 10^-7

Step 5: Find the square root of [Cl-]^2 to get [Cl-]:
[Cl-] = √(4.68 x 10^-7)

Step 6: Calculate [Cl-]:
[Cl-] = 6.84 x 10^-4

To know more about Precipitation:

https://brainly.com/question/13910046

#SPJ11

The formula for calcium hydrogen sulfate is D) Ca(HSO₄)₂:

One calcium cation (Ca2+) and two hydrogen sulfate anions (HSO4-) make up calcium hydrogen sulfate, commonly referred to as calcium bisulfate. The oxygen atoms in this molecule are in an oxidation state of -2, whereas the sulfur atoms are in an oxidation state of +6.

The prefix "bi-" denotes the existence of two hydrogen sulfate anions, each having a -1 charge, in the chemical. The calcium ion's positive charge of +2 balances the compound's total charge of -2.

The composition of the compound and the charge of its ions are accurately represented by the formula Ca(HSO₄)₂. This substance is frequently employed in the manufacturing of fertilizers and other chemicals, as well as in industrial procedures like water treatment. Additionally, there are various minerals and mineral formations that naturally contain it.

To know more about the calcium hydrogen sulfate refer here :

https://brainly.com/question/31417933#

#SPJ11

According to the octet rule, which is a chemical concept, atoms of second-row elements—with the exception of beryllium and boron—tend to combine in a fashion that results in a complete outer shell of eight electrons, or two electrons for hydrogen and helium. This is due to the fact that an atom is more stable and less likely to interact with other atoms when it has a full outer shell of electrons, which is advantageous energetically.

All second-row elements have four valence electrons in their outermost shell, with the exception of beryllium and boron. They must either receive four electrons to form a negative ion or lose four electrons to generate a positive ion in order to reach a full octet of eight electrons. They can also exchange electrons with other atoms to form covalent bonds, in which both atoms gain a full octet and each atom donates an electron to the bond.

With the exception of beryllium and boron, second-row elements typically obey the octet rule when creating stable compounds, but there are several exceptions. Some compounds, like boron trifluoride (BF₃), only have six electrons in their outer shells, resulting in incomplete octets. Because they lack electrons, these molecules can take electron pairs from other molecules to create weak bonds, which stabilizes them.

To know more about the second-row elements refer here :

https://brainly.com/question/25421561#

#SPJ11

The molecular formula for [tex]C_4H_4O[/tex] comes out to be B) [tex]C_{12}H_{12}O_2[/tex]

A chemical formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule

The molecular formula can be obtained if C4H4O is multiplied by a constant.

Smallest constant = 2

[tex]C_4H_4O[/tex] x 2 = [tex]C_8H_8O_2[/tex]

If [tex]C_4H_4O[/tex] is multiplied by a constant 3, then [tex]C_4H_4O[/tex] x 3, the molecular formula comes out to be [tex]C_{12}H_{12}O_3[/tex].

If we take 2 common in this formula [tex]C_{12}H_{12}O_3[/tex], then the possible molecular formula is [tex]C_4H_4O[/tex].

To learn more about chemical formula check the link below-

https://brainly.com/question/11574373

#SPJ4

The function of buffers is to resist changes in pH in the body fluids.

Buffers are able to minimize the impact of varying H+ concentrations by absorbing or releasing hydrogen ions as necessary, in order to maintain a stable pH. While buffers may not be able to completely stop changes in body fluids, they help to regulate pH levels and prevent extreme shifts that could be harmful to bodily processes. The function of buffers is to resist, but not completely stop, changes in the pH of body fluids. Buffers essentially minimize the change in pH that occurs with varying H+ concentrations, helping to maintain a stable pH level in the body.

To know more about Buffers:

https://brainly.com/question/22821585

#SPJ11

GPS uses satellite signals to determine an accurate position, while INS utilizes motion sensors and rotation sensors to calculate an object's position, velocity, and orientation.

GPS/INS guided munitions combine the strengths of Global Positioning System (GPS) and Inertial Navigation System (INS) technologies to enhance precision and reliability in hitting targets.

The accuracy of GPS/INS guided munitions depends on several factors, including the quality of the GPS signals, the performance of the INS sensors, and the integration of both systems. Typically, these munitions can achieve a Circular Error Probable (CEP) of less than 10 meters. CEP is a measure of accuracy where 50% of the shots will fall within the stated radius of the target.

Modern GPS/INS guided munitions, such as Joint Direct Attack Munition (JDAM) and Excalibur, have demonstrated CEPs as low as 1 to 3 meters. These high levels of accuracy reduce the likelihood of collateral damage and improve the effectiveness of military operations.

In summary, GPS/INS guided munitions can be expected to strike their targets within a range of 1 to 10 meters, depending on the quality of the components and integration. This accuracy significantly improves the effectiveness of the munitions, reducing collateral damage and contributing to more precise and efficient military operations.

For more such questions on GPS.

https://brainly.com/question/1823807#

#SPJ11

The alcohol in fermented drinks is option (E) HOCH₂CH₂OH, also known as ethyl alcohol or ethanol.

Fermentation is the process in which microorganisms convert sugars into alcohol and carbon dioxide. In the case of alcoholic beverages, the sugar source can be fruits, grains, or other plant materials. The type of alcohol produced is determined by the specific microorganism used in the fermentation process and the type of sugar source.

Ethanol is the most common type of alcohol found in fermented drinks, and its chemical formula is C₂H₅OH or CH₃CH₂OH. It is a colorless and flammable liquid with a characteristic odor and taste. Ethanol is used as a psychoactive substance in alcoholic beverages, but it also has other applications in industry, medicine, and fuel production.

Option (A) CH₃CH₂CH₂OH is a primary alcohol known as 1-butanol, which is not commonly found in fermented drinks. Options (B) CH₃CH₂OH and (C) CH₃OH are also alcohols, but they are not commonly found in fermented drinks either. Option (D) (CH₃)₂CHOH is a secondary alcohol known as 2-propanol or isopropyl alcohol, which can be found in some fermented beverages but is not as common as ethanol.

To know more about  ethyl alcohol, refer here:
https://brainly.com/question/11237501#
#SPJ11

The concentration of OH⁻(aq) in the solution is 2 × 10⁻⁸ M.

To calculate the concentration of OH⁻(aq) in the solution. We have the given equation: [H⁺] = 100 × [OH⁻] and [H⁺] = 2 × 10⁻⁶ M. Here are the steps to find the concentration of OH⁻:

1. Substitute the value of [H⁺] into the equation:
2 × 10⁻⁶ M = 100 × [OH⁻]

2. Divide both sides of the equation by 100:
(2 × 10⁻⁶ M) / 100 = [OH⁻]

3. Simplify the equation to find the concentration of OH⁻:
2 × 10⁻⁸ M = [OH⁻]

To know more about Concentration:

https://brainly.com/question/7551157

#SPJ11

To calculate the empirical formula, we first need to determine the moles of each element present in the compound.

Assuming a 100g sample of the compound, we can calculate the mass of each element present:

Mass of H = 11.19g
Mass of O = 88.79g

Next, we need to convert these masses into moles:

Moles of H = 11.19g / 1.01 g/mol = 11.08 mol
Moles of O = 88.79g / 16.00 g/mol = 5.55 mol

To find the simplest whole number ratio of the elements, we divide the number of moles of each element by the smallest number of moles:

Moles of H / Moles of O = 11.08 mol / 5.55 mol = 2

Therefore, the empirical formula of the compound is H2O.

To know more about empirical formula :

https://brainly.com/question/13058832

#SPJ11

15.4 moles C₅H₁₂. 15.36 moles of C₅H₁₂ (Pentane) contain 9.25 × 10^24 molecules of C₅H₁₂. The answer is option E.

To determine the number of moles of C₅H₁₂ that contain 9.25 × 10^24 molecules of C₅H₁₂, we need to use Avogadro's number, which relates the number of particles to the number of moles.

Avogadro's number (NA) is 6.022 × 10^23 particles/mol.

First, we can calculate the number of moles of C₅H₁₂ (pentane) that are present in 9.25 × 10^24 molecules by dividing the number of molecules by Avogadro's number:

moles = 9.25 × 10^24 molecules / 6.022 × 10^23 particles/mol = 15.36 moles

to know more about Pentane refer here:

https://brainly.com/question/15242374#

The retention time of two separable compounds in gas chromatography is affected by both temperature and the flow rate of the carrier gas.

An increase in temperature generally results in a decrease in retention time, while an increase in flow rate causes an increase in retention time. This is because higher temperatures reduce the interaction between the stationary phase and the compounds, while higher flow rates decrease the time available for interactions to occur. The amount of separation between the compounds may also change.

Higher temperatures tend to reduce the separation because the compounds move more quickly, while higher flow rates can increase the separation because there is less overlap between the peaks. However, the effect on separation can also depend on other factors such as column dimensions and stationary phase properties.

Learn more about gas chromatography

https://brainly.com/question/29485560

#SPJ4

Calculate the pH of the 500 mL buffer containing 0.15 M benzoic acid (C6H5COOH) and 0.25 M sodium benzoate (C6H5COONa). To find the pH, we will use the Henderson-Hasselbalch equation and the given Ka value for benzoic acid (6.3 × 10^-5).

Step 1: Write the Henderson-Hasselbalch equation:
pH = pKa + log ([A-]/[HA])

Step 2: Calculate the pKa from the given Ka:
pKa = -log(Ka) = -log(6.3 × 10^-5) ≈ 4.20

Step 3: Identify the concentrations of the acid [HA] and its conjugate base [A-]:
[HA] = 0.15 M (benzoic acid)
[A-] = 0.25 M (sodium benzoate)

Step 4: Plug the values into the Henderson-Hasselbalch equation:
pH = 4.20 + log(0.25/0.15)

Step 5: Calculate the pH:
pH ≈ 4.20 + 0.41 ≈ 4.61

So, the pH of the 500 mL buffer containing 0.15 M benzoic acid and 0.25 M sodium benzoate is approximately 4.61.

To know more about Henderson-Hasselbalch equation:

https://brainly.com/question/30466186

#SPJ11

To determine the number of valence electrons in acetone (CH₃C(O)CH₃) and draw the corresponding Lewis structure, follow these steps:

1. Count the total number of valence electrons from all the atoms:
- Carbon (C) has 4 valence electrons, and there are 3 carbon atoms, so 4 x 3 = 12.
- Hydrogen (H) has 1 valence electron, and there are 6 hydrogen atoms, so 1 x 6 = 6.
- Oxygen (O) has 6 valence electrons, and there is 1 oxygen atom, so 6 x 1 = 6.

Add all the valence electrons together: 12 + 6 + 6 = 24 valence electrons.

2. Draw the Lewis structure:
- Place the central atom, which is the carbon atom connected to the oxygen atom, in the middle.
- Connect the two other carbon atoms to the central carbon with single bonds.
- Connect the oxygen atom to the central carbon with a double bond.
- Attach three hydrogen atoms to each of the two outer carbon atoms with single bonds.

Your final Lewis structure for acetone (CH₃C(O)CH₃) should look like this:

     O
     ||
H - C - C - H
 |       |
H - C - H

In this structure, you have used all 24 valence electrons, and all atoms have complete octets.

To know more about Lewis structure :

https://brainly.com/question/20300458

#SPJ11

Catalase enzymes are present in the bacterial culture when peroxide causes gas evolution.

The development of gas when peroxide is added to a bacterial culture demonstrates the presence of catalase catalysts in the microscopic organisms. Catalase is a catalyst found in vigorous microscopic organisms that separates hydrogen peroxide into water and oxygen.

The response produces air pockets of oxygen gas, which can be seen as a development of gas when hydrogen peroxide is added to the bacterial culture. The presence of catalase is a significant symptomatic apparatus in recognizing various sorts of microorganisms, as not all microbes produce this chemical.

The shortfall of catalase can likewise have suggestions for anti-infection vulnerability, as certain anti-infection agents depend on the presence of oxygen extremists to apply their antibacterial impacts.

To learn more about peroxide, refer:

https://brainly.com/question/17270229

#SPJ4

The complete question is:

What does the evolution of gas when peroxide is added to a bacterial culture indicate in terms of the presence of which specific enzymes or compounds?

Answer:

A

Explanation:

As water is heavier, it displaces the lighter ice, causing the ice to float to the top.

The examples of coordinate covalent bonds including a human body is hemoglobin.

Coordinate covalent bonds are formed when one atom donates a pair of electrons to another atom that needs the electrons to complete its octet. This type of bond is also known as a dative bond. Here are some examples of coordinate covalent bonds:

Ammonia: In the ammonia molecule (NH3), the nitrogen atom donates a pair of electrons to each of the three hydrogen atoms. The resulting N-H bonds are coordinate covalent bonds.

Carbon monoxide: The carbon monoxide (CO) molecule has a triple bond between the carbon and oxygen atoms. The two pi bonds are formed by the carbon and oxygen sharing electrons.

Nitrogen dioxide: In the nitrogen dioxide (NO2) molecule, one oxygen atom donates a pair of electrons to the nitrogen atom to form a coordinate covalent bond.

Hemoglobin: Hemoglobin is a protein found in red blood cells that helps transport oxygen throughout the body. It contains a heme group, which is an iron atom coordinated to a porphyrin ring.

Metal complexes: Many metal complexes contain coordinate covalent bonds between the metal ion and one or more ligands. For example, in the complex ion [Cu(NH3)4]2+, each ammonia molecule donates a pair of electrons to the copper ion to form a total of four coordinate covalent bonds.

learn more about hemoglobin here:

https://brainly.com/question/14554559?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

The periodic table's d-block of elements includes aluminium. the components of d-block.

Elements are pure materials that cannot be chemically divided into less complex ones. They serve as the fundamental units of everything that exists in all things and are identified by their number at the atomic level, which is determined by the quantity of protons in each of their individual atoms.

118 known elements exist today, each with a distinct set fundamental physical and chemical characteristics. The periodic table classifies elements into groups based on their electron structure and chemical properties. The periodic chart is set up in columns (groups) and rows (periods) that represent recurrent patterns in the characteristics of elements.

To know more about elements visit :

https://brainly.com/question/13025901

#SPJ1

Mass is a dimensionless quantity which represents the amount of matter present in a particle or object. The SI unit of mass is kilogram (kg). The mass of potassium bromide contained in 35.8 mL of the solution is 2.78. The correct option is A.

The equation connecting the density, mass and volume is given as:

Density = Mass / Volume

Mass = Density × Volume

Mass =  1.03 g/mL × 35.8 mL

Mass = 36. 874 g

Total mass of potassium bromide, M = m × P%

M = 36. 874 × 7.55/ 100 %

M = 2.78

Thus the correct option is A.

To know more about mass, visit;

https://brainly.com/question/15136748

#SPJ4

The red line separates [A] on the left from [B] on the right. The word that should replace [B] in this sentence is the non metals.

The red line in the periodic table is the dividing the line in between the metals and the non-metals. The [A] on the left are the metals and the [B ] on the right are the non metals in the periodic table.

The Elements that can be divided in the metals and the nonmetals are the  important to know that whether the particular element comes under the metal or the nonmetal. The Metals as the copper and the aluminium are the good conductors of the heat and the electricity, and the nonmetals as the  phosphorus and sulfur are the insulators.

To learn more about periodic table here

https://brainly.com/question/20242608

#SPJ4

The rate law of the chemical reaction is : rate = k[A][B]⁻².

The chemical reaction is as :

2A + B   --->   2C  + 2D

The general expression for the rate law for the reaction is as :

Rate = k[A]^a[B]^b

Where,

a and b are the reactant concentration of the orders.

For the reactant "A" that is order of the "a" , select 1 and 3:

Rate3 / Rate1 = ( [A]3 / [A]1) ^a

2.60 × 10⁷ / 1.30  × 10⁷ = (0.200 / 0.100) ^a

2 = 2^a

a = 1

For the reactant "A" that is order of the "a" , select 1 and 2:

Rate2 / Rate1 = ( [B]2 / [B]1) ^b

1.17 × 10⁶ /  1.30  × 10⁷ = ( 0.300 / 0.100 )^b

0.09 = 3^b

b = -2

The rate law is as :

Rate = k[A][B]⁻²

To learn more about rate here

https://brainly.com/question/1034658

#SPJ4

This question is incomplete, the complete question is :

Consider a chemical reaction, where "A" is one of the reactants.

2A + B   --->   2C  + 2D. What is the rate law.