a 250 gram sample of water at the boiling point had 64.0 kj of heat added. how many grams of water were vaporized? heat of vaporization for water is 40.6 kj/mole.

The best representation of the given structure is a furanose with an alpha hydroxy group.

Furanose is a type of carbohydrate ring structure and consists of four carbon atoms with one oxygen atom in the center. The alpha hydroxy group is a functional group that consists of a carbon atom with two hydroxyl groups on either side. The presence of this group in the furanose ring structure changes the properties of the molecule, such as its reactivity and solubility.

The orientation of the hydroxy group is also important, and in this case, it is positioned at the alpha position, which means it is directly attached to one of the four carbon atoms of the ring. This configuration makes the molecule more reactive, and it can undergo various chemical reactions more easily than if it had a beta hydroxy group.

Pyranose is another type of carbohydrate ring structure, but it is made up of six carbon atoms instead of four and the orientation of the hydroxy group is different, so it is not the best representation of the given structure.

Know more about Furanose here

https://brainly.com/question/30642167#

#SPJ11

The girl who weighs 36 kg is about to go down the slide that is the 1.5 m tall. The energy is being used is 529.2 kJ.

The weight of the girl = 36 kg

The height of the tall = 1.5 m

The expression for the energy is as :

Energy = m g h

Where,

The mass, m = 36 kg

The acceleration to the gravity, g = 9.8 m/s²

The height, h = 1.5 m

The energy = 36 kg × 9.8 m/s² × 1.5 m

The energy = 529.2 kJ

The energy used is 529.2 kJ, when the girl who weight is 36kg that is 80lbs and will about to go down the slide that is the 1. 5m tall.

To learn more about energy here

https://brainly.com/question/13582715

#SPJ4

Resulting in a color change of the solution, which can be used as a test for the presence of reducing sugars.

Reducing sugars contain a free aldehyde or ketone group that can undergo oxidation in the presence of mild oxidizing agents, such as copper ions in Benedict's solution.

Benedict's solution is a commonly used chemical test for the presence of reducing sugars, such as glucose and fructose, in a solution.

The test is based on the ability of the aldehyde or ketone group in a reducing sugar to donate electrons to an oxidizing agent, such as copper ions [tex](Cu2+)[/tex], which are reduced to copper(I) oxide [tex](Cu2O)[/tex] in the process.

When a solution containing a reducing sugar is mixed with Benedict's solution and heated, the solution changes color from blue to green, yellow, orange, or red, depending on the concentration of the reducing sugar present.

The color change occurs because the copper ions in Benedict's solution are reduced to copper(I) oxide, which is a red-brown precipitate.

The reaction between the reducing sugar and Benedict's solution is dependent on the presence of a free aldehyde or ketone group in the sugar molecule.

Non-reducing sugars, such as sucrose and lactose, which do not have a free aldehyde or ketone group, do not react with Benedict's solution.

In summary, reducing sugars contain a free aldehyde or ketone group that can react with mild oxidizing agents, such as copper ions in Benedict's solution

Learn more about reducing sugars

brainly.com/question/30022610

#SPJ11

Due to their stronger metallic bonding and more compact atomic structure, the transition elements have higher melting and boiling temperatures and are often denser than the alkali metals.

Elements from Group 1 have similar properties. All of them are supple silver metals. These metals are extremely reactive and have low melting temperatures due to their low ionisation energy. As you descend the chart, this family becomes more reactive.

The d orbitals of transitional elements are only partially filled. A transition element is defined by IUPAC as an element that may form stable cations and has an electron d subshell that is only partly filled.

To know more about transition elements visit:-

https://brainly.com/question/1948991

#SPJ1

Answer: Clouds form when the invisible water vapor in the air condenses into visible water droplets or ice crystals.

Explanation:

The value for Gibbs free energy will a) decrease b) increase and c) decrease.

The Gibbs free energy equation is dependent on pressure. When a system changes from an initial state to a final state, the Gibbs free energy (ΔG) equals the work exchanged by the system with its surroundings, minus the work of the pressure force. The Gibbs free energy is expressed as. where P is pressure, T is the temperature, U is the internal energy, V is volume, H is the enthalpy, and S is the entropy. The value for Gibbs free energy will a) decrease b) increase and c) decrease.

To learn more about Gibbs free energy check the link below-

brainly.com/question/9179942

#SPJ4

Complete question-

Indicate whether ?G increases, decreases, or does not change when the partial pressure of H2 is increased in each of the following reactions:

a. N2(g)+3H2(g)=>2NH3(g)

b. 2HBr(g)=> H2(g)+Br2(g)

c. 2H2(g)+C2H2(g)=> C2H6(g)

The conjugate base of H2PO4− is HPO42-. The answer is option A)

The conjugate base of an acid is the species formed after the acid donates a proton (H+). In other words, the conjugate base is the particle that remains after the acid has lost a proton.

In this case, H2PO4- is acid and it can donate one proton to form its conjugate base. When H2PO4- loses one proton, it becomes HPO42- which is its conjugate base.

Therefore,  HPO42- is the answer.

To know more about conjugate base click here:

https://brainly.com/question/30225100

#SPJ11

In chemistry, when an acid and a base react with each other, they neutralize to form a salt and water. This neutralization reaction occurs when the hydrogen ions (H+) in the acid react with the hydroxide ions (OH-) in the base.

During the reaction, the hydrogen and hydroxide ions combine to form water, while the remaining ions combine to form a salt. The acid and base are referred to as reactants in this reaction, as they are the starting materials that react with each other to produce the salt and water.

The products of the reaction are the salt and water that are formed. This neutralization reaction is an example of an ionic reaction, as it involves the transfer of electrons between the two reactants. The reaction is also exothermic, meaning that it releases energy in the form of heat.

Know more about neutralization reaction here

https://brainly.com/question/28970253#

#SPJ11

The mass fractions of the individual elements of the mixture are 26 g, 18 g and 5.42 g respectively and  apparent molecular weight of this mixture is 49.42 g.

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. They have a mass of one atom.Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

Mass fraction of hydrogen=26/1=26,mass fraction of helium= 36/2=18 , mass fraction of nitrogen=38/7=5.42 and apparent molecular weight of this mixture is 26+18+5.42=49.42 grams.

Learn more about element,here:

https://brainly.com/question/14347616

#SPJ4

The name for PI3 is phosphorus triiodide. The correct option is A.

PI3 is a covalent compound composed of phosphorus and iodine, with the molecular formula PI3. The compound is a dark red solid with a pungent odor and is highly reactive, decomposing rapidly in water and air.

The name "phosphorus triiodide" follows the standard naming convention for covalent compounds, where the prefix "tri-" indicates that the compound contains three iodine atoms bonded to one phosphorus atom.

The prefix "phosphorus" indicates the presence of a phosphorus atom, while the suffix "-ide" indicates that iodine is in its anionic form.

It is important to note that the other options listed (potassium triiodide, phosphorus(III) iodide, phosphorus(II) iodide, and phosphorus iodide) are all valid compounds with different chemical formulas and properties.

The correct name for each of these compounds is as follows:

B) Potassium triiodide is KI3

C) Phosphorus(III) iodide is PI3

D) Phosphorus(II) iodide is not a valid compound.

E) Phosphorus iodide is not a specific compound and can refer to several different phosphorus-iodine compounds with varying formulas and properties.

to know more about covalent compounds refer here:

https://brainly.com/question/11632372#

#SPJ11

To get salt out of a solution (separating salt from water), you could try:

a. evaporating the water so the salt is left behind

This is the correct method because as the water evaporates, the salt, which does not evaporate, will be left behind as solid crystals. The other options (b, c, d, and e) are not effective methods for separating salt from water.

In order to turn seawater into freshwater you have to remove the dissolved salt in seawater. That may seem as easy as just boiling some seawater in a pan, capturing the steam and condensing it back into water (distillation).

To know more about salt out of a solution :

https://brainly.com/question/28693614

#SPJ11

The correct option is A,  the Ksp for Cul is 5.11 × 10⁻¹².

CuI (s) ⇌ Cu⁺ (aq) + I⁻ (aq)

Ksp = [Cu⁺][I⁻]

Since CuI dissolves completely to form one Cu⁺ ion and one I⁻ ion, the concentration of Cu⁺ and I⁻ ions is the same as the molar solubility of CuI.

Therefore, Ksp = (2.26 × 10⁻⁶)² = 5.11 × 10⁻¹²

Ksp stands for solubility product constant and is a measure of the extent to which a solute dissolves in a solvent. It is defined as the product of the concentrations of the ions in a saturated solution of a sparingly soluble salt at a given temperature. In other words, it represents the equilibrium constant for the dissolution of a solid substance in a solvent.

Ksp is an important concept in chemistry because it helps to predict the solubility of a substance and its behavior in solution. For example, if the Ksp value for a substance is high, it means that the substance is highly soluble and will dissolve easily in a solvent. Conversely, if the Ksp value is low, the substance will be less soluble and may form a precipitate. Calculating Ksp requires knowledge of the balanced equation for the dissolution of the substance, as well as the concentrations of the ions in solution.

To learn more about Ksp visit here:

brainly.com/question/27132799

#SPJ4

The pH of the buffer containing 0.800 molar acetic acid and 1.00 molar sodium acetate is  approximately 4.84.

To calculate the pH of a buffer containing 0.800 M acetic acid and 1.00 M sodium acetate, you can use the Henderson-Hasselbalch equation:

pH = pKa + log10([A-]/[HA])

Here, pKa is the negative logarithm of the acid dissociation constant (Ka) for acetic acid, [A-] is the concentration of the conjugate base (acetate ion from sodium acetate), and [HA] is the concentration of the weak acid (acetic acid).

The pKa of acetic acid is approximately 4.74. Plugging the concentrations into the equation:

pH = 4.74 + log10(1.00 M / 0.800 M)

pH ≈ 4.74 + 0.1

pH ≈ 4.84

So, the pH of the buffer solution is approximately 4.84.

For more such questions on buffer, click on:

https://brainly.com/question/13076037

#SPJ11

The mass percent composition of sulfur in Al2(SO4)3 is approximately 28.12% (Option A).

To calculate the mass percent composition of sulfur in Al2(SO4)3, follow these steps:

1. Determine the molar mass of the compound Al2(SO4)3:
- 2 moles of Al (26.98 g/mol) = 2 * 26.98 = 53.96 g/mol
- 3 moles of SO4 (1 S: 32.07 g/mol, 4 O: 4 * 16.00 g/mol = 64.00 g/mol) = 3 * (32.07 + 64.00) = 3 * 96.07 = 288.21 g/mol

Total molar mass of Al2(SO4)3 = 53.96 + 288.21 = 342.17 g/mol

2. Calculate the mass percent composition of sulfur (S):
Mass percent of S = (total mass of S in the compound / total molar mass of the compound) * 100
Mass percent of S = (3 * 32.07 g/mol) / 342.17 g/mol * 100 ≈ 28.12%

Therefore, the mass percent composition of sulfur in Al2(SO4)3 is approximately 28.12% (Option A).

To learn more about molar mass, refer below:

https://brainly.com/question/22997914

#SPJ11

Methane, being a gas, would have a lower boiling point than aluminum chloride, and is likely to be in a gaseous state at room temperature.

Methane (CH4) is a simple hydrocarbon gas that is typically known to have a boiling point lower than 25°C at standard atmospheric pressure (1 atm).

Aluminum chloride (AlCl3), on the other hand, is a solid compound at 25°C. It has a high melting and boiling point, and it is typically known to be a solid at room temperature (25°C) and atmospheric pressure.

Based on these properties, we can infer that the boiling point of methane (CH4) is lower than 25°C. This is because aluminum chloride (AlCl3), which is a solid at 25°C, would not be in a liquid state at or below 25°C, and therefore cannot have a boiling point higher than 25°C.

To know more about methane refer here:-

https://brainly.com/question/28933327#

#SPJ11

The  practice bomb is used to simulate the B61 is the thermonuclear gravity bomb.

The B61 nuclear bomb is the bomb that is primary the thermonuclear gravity bomb in the United States that is enduring the stockpile the end of the Cold War. The B61 nuclear bomb is the low to the intermediate-yield strategic or the tactical nuclear weapon that is featuring the two-stage radiation that implosion in the design.

The B61 nuclear bomb is detonate the beneath of the Earth's surface, that will increasing the destructiveness in against the underground targets and to the equivalent of the surface that burst the weapon and yield of the 1,250 kilotons.

To learn more about bomb here

https://brainly.com/question/30288409

#SPJ4

The reaction of an asymmetrical alkyne with hydrogen gas (H2) in the presence of a palladium catalyst (Pd/C) typically results in the reduction of the alkyne to an alkene.

The reaction mechanism involves the formation of a π-complex between the alkyne and Pd/C, followed by syn-addition of two hydrogen atoms across the triple bond to give a cis-alkene intermediate.

This intermediate can undergo isomerization to form a trans-alkene, or it can undergo further hydrogenation to give a saturated alkane.

If the alkyne is asymmetrical, meaning that the two substituents on the triple bond are different, then the product will be a mixture of cis- and trans-alkenes.

The ratio of these two isomers will depend on the steric and electronic effects of the substituents and the reaction conditions.

Overall, the reaction of an asymmetrical alkyne with H2 and Pd/C is a useful method for the selective reduction of alkynes to alkenes, which are versatile building blocks in organic synthesis.

learn more about isomers here:

https://brainly.com/question/12796779?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

The H₂O position in the spectrochemical series is explain by the molecular orbital energy diagram.

In the molecular orbital diagram in the water are very close to the energy level of the oxygen 2p energy level and the electronegativity of the oxygen is the main reason for the typical transition metal are the more electropositive than the hydrogen.

In the terms of the energy level the lowest energy of MO of the H₂O is not likely to have the significant overloop with the metal. The spectrochemical series is the list of the ligands that are ordered by the ligand strength.

To learn more about spectrochemical series here

https://brainly.com/question/28196968

#SPJ4

The two types of secondary structures that occur frequently in proteins are alpha helices and beta sheets.

Alpha helices are tightly coiled structures, where the polypeptide backbone forms a spiral shape. Beta sheets, on the other hand, are made up of extended strands of polypeptide chains that are folded back and forth to create a flat, sheet-like structure. Both of these secondary structures play important roles in determining a protein's overall shape and function.

To know more about structures refer here:

https://brainly.com/question/30560943#
#SPJ11

The reaction you're describing is a halogenation reaction where an unsymmetrical alkene reacts with a halogen (X2) and water (H2O) to form a halohydrin. The general reaction can be represented as follows:

Asymmetrical alkene + X2 + H2O → Halohydrin

For example, let's consider the reaction between propene (an asymmetrical alkene) and chlorine gas (Cl2) in the presence of water (H2O):

CH3CH=CH2 + Cl2 + H2O → CH3CH(Cl)CH2OH

In this reaction, the double bond of propene is broken and a chlorine atom is added to one carbon atom, while a hydroxyl group (-OH) is added to the other carbon atom.

This forms a halohydrin, which in this case is 2-chloropropanol. The reaction mechanism involves the formation of a cyclic intermediate called a halonium ion, which is then attacked by water to form the halohydrin.

Note that the halogenation of an unsymmetrical alkene can lead to the formation of different products, depending on the regioselectivity of the reaction. In the example above, the reaction is regioselective because the chlorine atom is added to the less-substituted carbon atom of the alkene.

learn more about halogenation here:

https://brainly.com/question/31033378?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

The role of [tex]Ca^{2+}[/tex] ions during macrocapsule formation is to facilitate the cross-linking of polyanionic molecules, such as polysaccharides, within the macrocapsule structure.

[tex]Ca^{2+}[/tex]ions form strong electrostatic interactions with the negatively charged groups present in the polymer chains, thereby promoting intermolecular binding and stability. This leads to the formation of a rigid and stable macrocapsule structure. This cross-linking process strengthens the macrocapsule and provides stability. After the addition of [tex]Ca^{2+}[/tex]the properties of the macrocapsule change, resulting in increased rigidity, improved mechanical strength, and enhanced stability against external factors. After the addition of  [tex]Ca^{2+}[/tex] the properties of the macrocapsule are significantly changed. The macrocapsule becomes more rigid and stable, with improved mechanical strength and resistance to degradation. The [tex]Ca^{2+}[/tex] ions also improve the permeability of the macrocapsule membrane, making it more selective towards the transport of certain molecules. Overall, the addition of [tex]Ca^{2+}[/tex] plays a crucial role in enhancing the properties of macrocapsules for various applications in drug delivery and tissue engineering.

Learn more about macrocapsule here: https://brainly.com/question/31449740

#SPJ11

If the temperature increases to 127 degrees celsius and the pressure decreases to 0.500 atm, the final volume of the gas is approximately 66.1 mL

We will use the combined gas law, which is:

P[tex]_{1}[/tex] * V[tex]_{1}[/tex] / T[tex]_{1}[/tex] = P[tex]^{2}[/tex] * V[tex]^{2}[/tex] / T[tex]^{2}[/tex]

Where P[tex]_{1}[/tex] is the initial pressure (1.00 atm), V[tex]_{1}[/tex] is the initial volume (30.0 mL), T[tex]_{1}[/tex] is the initial temperature (0.00°C), P[tex]^{2}[/tex] is the final pressure (0.500 atm), V[tex]^{2}[/tex] is the final volume (which we want to find), and T[tex]^{2}[/tex] is the final temperature (127°C).

First, we need to convert the temperatures from Celsius to Kelvin:

T[tex]_{1}[/tex] = 0.00°C + 273.15 = 273.15 K
T[tex]^{2}[/tex] = 127°C + 273.15 = 400.15 K

Now, plug in the values into the combined gas law equation:

(1.00 atm) * (30.0 mL) / (273.15 K) = (0.500 atm) * V[tex]^{2}[/tex] / (400.15 K)

Next, solve for V[tex]^{2}[/tex]:

V[tex]^{2}[/tex] = (0.500 atm) * (30.0 mL) * (400.15 K) / (1.00 atm * 273.15 K)
V[tex]^{2}[/tex] ≈ 66.1 mL

So, the final volume of the gas is approximately 66.1 mL when the temperature increases to 127°C and the pressure decreases to 0.500 atm.

More on gas volume: https://brainly.com/question/16218221

#SPJ11

A hydrophobic residue on the exterior of a protein require decreased entropy so as to enable diffusion.

Diffusion is defined as the process of movement of molecules  such as proteins which takes place under concentration gradient. It helps in movement of substances in and out from the cell.The molecules move from lower concentration region to a higher concentration region till the concentration becomes equal.

There are 2 main types of diffusion:

1) simple diffusion-process in which substances move through a semi-permeable membrane without the aid of transport proteins.

2) facilitated diffusion- It is a passive movement of molecules across cell membrane from higher concentration region to lower concentration.

Learn more about diffusion,here:

https://brainly.com/question/24746577

#SPJ4

Since we have 1.4 moles of Ca(OH)2, which is greater than the calculated amount needed, Ca(OH)2 is in excess and the answer is A) Ca(OH)2.

To determine the excess reactant for the given reaction, we will use the balanced chemical equation and the provided moles of reactants. The balanced equation is:

2HCl + Ca(OH)2 → 2H2O + CaCl2

We have 2.6 moles of HCl and 1.4 moles of Ca(OH)2. To find the limiting reactant, we'll compare the mole ratios of the reactants:

Mole ratio of HCl to Ca(OH)2 = 2:1

Now, divide the given moles by the coefficients in the balanced equation:

HCl: 2.6 moles / 2 = 1.3
Ca(OH)2: 1.4 moles / 1 = 1.4

Since 1.3 is smaller than 1.4, HCl is the limiting reactant. Therefore, Ca(OH)2 is the excess reactant.

To know more about Limiting Reagent:

https://brainly.com/question/11848702

#SPJ11

165g is the mass of  aluminum metal will be deposited from a solution that contains Al³⁺ ions if a current of 1.10 a is applied for 50.0 minutes.

A body's mass is an inherent quality. Prior to the discoveries of the atom and the theory of particles, it was widely considered to be tied to the amount of substance in a physical body.

It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses. There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent.

m= z×Q

Q = I×t

  =  1.10×50

m= 3×1.10×50

   =165g

To learn more about mass, here:

brainly.com/question/19694949

#SPJ4

The ion that forms a tetrahydroxy complex with excess hydroxide ions (pH > 9) rather than a precipitate is aluminum ion (Al³⁺).

The formation of the tetrahydroxy complex, also known as the Al(OH)4- complex, occurs when excess hydroxide ions react with the Al3+ ion, causing the formation of a stable, soluble complex instead of a solid precipitate. This phenomenon is commonly observed in the treatment of wastewater, where aluminum salts are added to help remove phosphates and other contaminants from the water.

#SPJ11

Learn more on: https://brainly.com/question/2437279

The relationships between these values can be described by the following equations:
Ka x Kb = Kw
pKa + pKb = pKw

Ka, Kb, and Kw are all equilibrium constants that relate to the strength of acids and bases in solution.

Ka is the acid dissociation constant, which describes the extent to which an acid donates a proton (H+) in solution. It is calculated by dividing the concentration of the products of the dissociation reaction by the concentration of the acid.

Kb is the base dissociation constant, which describes the extent to which a base accepts a proton (H+) in solution. It is calculated by dividing the concentration of the products of the dissociation reaction by the concentration of the base.

Kw is the ion product constant for water, which describes the extent to which water dissociates into H+ and OH- ions in solution. It is equal to the product of the concentrations of H+ and OH- ions in solution.

pKa and pKb are logarithmic measures of the acid and base dissociation constants, respectively. They are calculated by taking the negative logarithm of the respective equilibrium constant values.

pKw is the negative logarithm of Kw, and is equal to 14 at 25°C.
The relationships between these values can be described by the following equations: Ka x Kb = Kw
pKa + pKb = pKw

Learn more about pKa : https://brainly.com/question/15037797  

#SPJ11

Protonation of a functional group, like an alcohol or an oxygen, generally does the following:

1. Increases the acidity of the functional group: Protonation adds a hydrogen ion (H+) to the functional group, which increases its acidity by creating a positive charge on the molecule.

2. Makes the functional group more reactive: The addition of a hydrogen ion increases the reactivity of the functional group, making it more likely to participate in chemical reactions.

3. Changes the polarity of the functional group: Protonation affects the distribution of electron density within the functional group, altering its polarity and potentially affecting its solubility and other properties.

In summary, protonation of a functional group like alcohol or oxygen increases its acidity, reactivity, and changes its polarity.

To know more about polarity :

https://brainly.com/question/31117109

#SPJ11

The percentage composition of ethane is 39.99% carbon

60.01% hydrogen and that of sodium hydrogen sulfate is 19.15% sodium 0.84% hydrogen 26.71% sulfur 53.30% oxygen

A. Ethane (C2H6)

To calculate the percent composition of ethane, we need to determine the molar mass of the compound, which is the sum of the atomic masses of all the atoms in the molecule.

Molar mass of ethane = (2 × molar mass of carbon) + (6 × molar mass of hydrogen)

= (2 × 12.011 g/mol) + (6 × 1.008 g/mol)

= 30.07 g/mol

Now we can calculate the percent composition of each element in ethane:

% composition of carbon = (2 × molar mass of carbon ÷ molar mass of ethane) × 100%

= (2 × 12.011 g/mol ÷ 30.07 g/mol) × 100%

= 39.99%

% composition of hydrogen = (6 × molar mass of hydrogen ÷ molar mass of ethane) × 100%

= (6 × 1.008 g/mol ÷ 30.07 g/mol) × 100%

= 60.01%

Therefore, the percent composition of ethane is:

39.99% carbon

60.01% hydrogen

B. Sodium hydrogen sulfate (NaHSO4)

To calculate the percent composition of sodium hydrogen sulfate, we need to determine the molar mass of the compound.

Molar mass of NaHSO4 = molar mass of Na + molar mass of H + molar mass of S + 4 × molar mass of O

= 22.99 g/mol + 1.008 g/mol + 32.06 g/mol + 4 × 16.00 g/mol

= 120.06 g/mol

Now we can calculate the percent composition of each element in sodium hydrogen sulfate:

% composition of sodium = (molar mass of Na ÷ molar mass of NaHSO4) × 100%

= (22.99 g/mol ÷ 120.06 g/mol) × 100%

= 19.15%

% composition of hydrogen = (molar mass of H ÷ molar mass of NaHSO4) × 100%

= (1.008 g/mol ÷ 120.06 g/mol) × 100%

= 0.84%

% composition of sulfur = (molar mass of S ÷ molar mass of NaHSO4) × 100%

= (32.06 g/mol ÷ 120.06 g/mol) × 100%

= 26.71%

% composition of oxygen = (4 × molar mass of O ÷ molar mass of NaHSO4) × 100%

= (4 × 16.00 g/mol ÷ 120.06 g/mol) × 100%

= 53.30%

Therefore, the percent composition of sodium hydrogen sulfate is:

19.15% sodium

0.84% hydrogen

26.71% sulfur

53.30% oxygen

learn more about oxygen here:

https://brainly.com/question/2272415?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

When methyl or 1˚ ether reacts with 2 equivalents of HX (hydrogen halide), the ether undergoes acid-catalyzed cleavage to form two products: an alkyl halide and an alcohol.

The reaction mechanism involves the protonation of the ether oxygen by HX, followed by nucleophilic attack by the halide ion on the carbon bearing the alkyl or aryl group. The overall reaction can be represented as follows:

R-O-R' + 2HX → R-X + R'-OH + HX

where R and R' represent alkyl or aryl groups.

For example, when methyl ether (CH3-O-CH3) reacts with two equivalents of HCl, it forms methyl chloride (CH3-Cl) and methanol (CH3-OH) according to the following reaction:

CH3-O-CH3 + 2HCl → CH3-Cl + CH3-OH + HCl

Similarly, when 1˚-butyl ether (C4H9-O-C4H9) reacts with two equivalents of HBr, it forms 1-bromobutane (C4H9-Br) and butanol (C4H9-OH) according to the following reaction:

C4H9-O-C4H9 + 2HBr → C4H9-Br + C4H9-OH + HBr

learn more about protonation here:

https://brainly.com/question/29680320

#SPJ11