A 3-kilogram ball is accelerated from rest to a speed of 10 m/sec

Answers

Answer 1

The result of multiplying a particle's mass by its velocity is the fluctuation in momentum of a ball, which is 30 kg per second. Since momentum has both a magnitude and a direction, it is a vector quantity.

In the actual world, what is momentum?

Almost every action that involves motion has momentum. It is an important tenet of physicsFor instance, if a team is moving forward and trying to stop, it will be difficult.

mv - mu, where u = 0 and v = 10 m/s, equals change in momentum.  Note that the ball moved from rest, therefore its initial velocity was zero (u = 0).

Momentum change is equal to mv mu, which is 3*10 - 3*0, or 30.

30 kg/s = change in momentum.

What are examples and momentum?

Momentum can be compared to the "power" a moving body has, or the amount of force it can exert on another body. For instance, a baseball that is thrown quickly (high velocity) and has a small bulk (big mass) can have the exact same momentum as a bowling ball that is travelling very slowly (low velocity).

To know more about momentum visit:

https://brainly.com/question/30677308

#SPJ1


Related Questions

Fifteen years ago, a quasar was observed that was found to be located 12 billion light years away: If our universe is approximately 15 billion years old, when did the quasar emit the light that we observe? A. 3 billion years ago B: 12 billion years ago C. 15 billion years ago D.15 years ago'

Answers

The light was produced by the quasar 12 billion years ago, just as the universe was beginning to develop. The correct response is B: 12 billion years ago because the observation was made 15 years ago.

Why or why not is it feasible to observe a galaxy 20 billion light-years away?

We are only able to observe objects that are up to 46.1 billion light-years away because of the expanding cosmos. There will always be constraints on the objects we can observe and the objects we might be able to access, regardless matter how much time passes.

27 light years away from Earth, what?

Earth is 27 light years away from the star Vega.

To know more about light visit:

https://brainly.com/question/15200315

#SPJ1

You charge an electroscope with a plastic rod that has been rubbed with cat fur. What will the metal-foil leaves do when you approach the ball of the electroscope?

Answers

When you charge an electroscope with a plastic rod that has been rubbed with cat fur, the rod gains a static charge due to the triboelectric effect.

If you approach the ball of the electroscope with the charged rod, the metal-foil leaves will repel each other and diverge.

This occurs because the charged rod induces an opposite charge on the ball, causing a separation of charges within the electroscope and making the metal-foil leaves carry the same charge, which leads to repulsion.

To know more about triboelectric effect here

https://brainly.com/question/995874

#SPJ11

what is the average density of a neutron star that has the same mass as the sun but a radius of only 20.0

Answers

The volume of a sphere is 33.51 × 10¹² m³ . The average density of the neutron star with the given mass and radius is approximately 5.94 × 10¹⁷ kg/m³.

To calculate the average density of a neutron star with the given mass and radius is:

Average density = Mass / Volume.

1 km = 1000 m

So, the radius of the neutron star in meters is:

20.0 × 1000 = 20,000 m.

The volume of a sphere is given by the formula:

Volume = (4/3) × π × r³

Volume = (4/3) × π × (20,000)³

Volume = 33.51 × 10¹² m³

Now we can calculate the average density:

Average density = Mass / Volume.

Average density = (1.989 × 10³⁰) / (33.51 × 10₁₂ ).

Average density = 5.94 × 10¹⁷

Therefore, the average density of the neutron star with the given mass and radius is approximately 5.94 × 10¹⁷ kg/m³.

To know more about average density:

https://brainly.com/question/31806850

#SPJ12

The complete question is:

what is the average density of a neutron star that has the same mass as the sun but a radius of only 20.0 km?

A ball of mass m is moving in a circle with uniform speed on a horizontal surface with friction at the end of a radial metal rod. The net force is...

Answers

The net force in the circular motion of the ball is along the rod.

Since, the ball of mass m is moving in a circle with uniform speed on a horizontal surface, we can say that it is executing a uniform circular motion.

So, for the circular motion of the ball, it requires a force called centripetal force which is acting towards the center.

Therefore, the net force acting on the ball will be along the metal rod.

To learn more about circular motion, click:

https://brainly.com/question/29312275

#SPJ4

The polar coordinates of a point are (5.3 , 32°).What are the point's Cartesian coordinates?

Answers

The Cartesian coordinates of the point are approximately (4.5, 2.8).

To find the Cartesian coordinates of a point given its polar coordinates, we use the following formulas:
x = r cosθ
y = r sinθ
Where r is the distance from the origin to the point and θ is the angle that the line connecting the point and the origin makes with the positive x-axis.

In this case, the polar coordinates of the point are (5.3, 32°). This means that the distance from the origin to the point is 5.3 and the angle that the line connecting the point and the origin makes with the positive x-axis is 32°.

Using the formulas above, we can find the Cartesian coordinates of the point:

x = 5.3 cos(32°) ≈ 4.5
y = 5.3 sin(32°) ≈ 2.8

Therefore, the Cartesian coordinates of the point are approximately (4.5, 2.8).

Learn more about "cartesian coordinates": https://brainly.com/question/30637894

#SPJ11

12.30 The thermal energy of a container of helium gas is halved. What happens to the temperature, in kelvin?A. It decreases to one-fourth its initial value. B. It decreases to one-half its initial value. C. It stays the sameD. It increases to twice its initial value.

Answers

When the thermal energy of a container of helium gas is halved, the temperature decreases to one-half its initial value.

Therefore the answer is B. It decreases to one-half its initial value.

The temperature of an ideal gas is directly proportional to its thermal energy, so if the thermal energy of a container of helium gas is halved, its temperature will also be halved. This is because thermal energy is a measure of the average kinetic energy of the gas molecules, which determines the temperature of the gas.

Therefore the answer is option B, it decreases to one-half its initial value.

When the thermal energy is halved, the gas molecules will move more slowly and have less kinetic energy, resulting in a lower temperature. According to the ideal gas law, the temperature of an ideal gas is proportional to its pressure and density, so a decrease in temperature will also lead to a decrease in pressure and density.

To know more on ideal gas law

https://brainly.com/question/28257995

#SPJ4

An ideal fluid, of density 0.85 ´ 103 kg/m3, flows at 0.25 kg/s through a pipe of radius 0.010 m. What is the fluid speed?

Answers

The fluid speed is 0.936 m/s.

We need to find the fluid speed given the density, flow rate, and pipe radius.

Step 1: Calculate the volume flow rate (Q) using the mass flow rate (m_dot) and density (ρ):
Q = m_dot / ρ

Step 2: Substitute the given values:
Q = 0.25 kg/s / (0.85 x 10³ kg/m³) = 2.9412 x 10⁻⁴ m³/s

Step 3: Calculate the cross-sectional area (A) of the pipe using the given radius (r):
A = πr²

Step 4: Substitute the given radius:
A = π(0.010 m)² = 3.1416 x 10⁻⁴ m²

Step 5: Calculate the fluid speed (v) using the volume flow rate (Q) and cross-sectional area (A):
v = Q / A

Step 6: Substitute the values from steps 2 and 4:
v = (2.9412 x 10⁻⁴ m³/s) / (3.1416 x 10⁻⁴ m²) = 0.936 m/s

Learn more about speed:

https://brainly.com/question/13943409

#SPJ11

When two point charges are a distance d apart, the electric force that each one feels from the other has magnitude F. In order to make this force twice as strong, the distance would have to be changed to
A) √2d
B) d/√2
C) d/4
D) 2d
E) d/2

Answers

In order to make this force twice as strong, the distance would have to be changed to r' =√(1/2)r. Hence option B is correct.

The force of attraction between two charges are given by coulomb's law.

the law states that the force of attraction or repulsion between two point charges is directly proportional to product of magnitude of both the charge and inversely proportional to square of the distance between them.

i.e. F ∝ q₁q₂

F ∝ 1/r²

F ∝ q₁q₂/r²

F = kq₁q₂/r²

where k is proportionality constant k = 1/4π∈₀

In this problem

if r = √(1/2) r

F ∝ 1/r²

F ∝ 2/r²

then F = 2F

Hence in order to make force twice the distance must be √(1/2)

Hence option B is correct.

To know more about force :

https://brainly.com/question/26115859

#SPJ4.

Is it possible for an object to an moving in one direction while the net force acting on it is in another direction? If your answer is yes, provide an example. If your answer is no, explain why not.

Answers

Yes, it is possible for an object to be moving in one direction while the net force acting on it is in another direction. This is because the object's motion is determined by the combination of all the forces acting on it, not just the net force.


For example, consider a car driving on a circular track at a constant speed. The net force acting on the car is directed towards the center of the circle, which is perpendicular to the car's direction of motion. However, the car continues to move forward due to the inertia of its motion. Another example is a rocket moving in space. The rocket's engines apply a force in one direction, but the rocket can continue to move in another direction if it has sufficient velocity and is not acted upon by any external forces. In both cases, the object's motion is not solely determined by the net force acting on it, but also by its initial velocity and the absence of any other external forces.

Learn more about inertia here

https://brainly.com/question/3268780

#SPJ11

The quantity "pressure" expressed in terms of the fundamental quantities (mass, length, time) is equivalent to
a. MLT^-1
b. M²L^-1T^-3
c. ML^-T^-2
d. a dimensionless quantity.

Answers

The quantity "pressure" expressed in terms of the fundamental quantities (mass, length, time) is equivalent to option c. ML^-T^-2.

This is because pressure is defined as force per unit area, where force is mass times acceleration (MLT^-2) and area is length squared (L^2).

Therefore, pressure can be expressed as (MLT^-2)/(L^2), which simplifies to ML^-T^-2. Option a (MLT^-1) represents the dimension of force, not pressure.

Option b (M²L^-1T^-3) is not a valid unit for pressure, and option d (a dimensionless quantity) is incorrect because pressure does have dimensions.

Therefore, the correct answer is option c. ML^-T^-2.

Read more about Pressure.

https://brainly.com/question/29183942

#SPJ11

what is the index of refraction of the prism if the light undergoes total internal reflection on the second surface the light ray is incident upon within the prism?

Answers

If the light undergoes total internal reflection on the second surface of the prism, it means that the angle of incidence is greater than the critical angle.

The critical angle is the angle of incidence at which the refracted angle is 90 degrees (i.e., the light ray is refracted along the surface of the medium). The critical angle is given by:

sin(theta_c) = n2/n1

where n1 is the index of refraction of the first medium (air, in this case), n2 is the index of refraction of the second medium (the prism), and theta_c is the critical angle.

If the light undergoes total internal reflection, it means that the angle of incidence is greater than the critical angle, so we can write:

theta_i > theta_c

where theta_i is the angle of incidence.

We can rearrange the critical angle equation to solve for n2:

n2 = n1*sin(theta_c)

Since we know the angle of incidence and the index of refraction of air (which is approximately 1), we can calculate the critical angle.

If the angle of incidence is greater than the critical angle, we can conclude that the light undergoes total internal reflection and the index of refraction of the prism is greater than 1.

So, to determine the index of refraction of the prism, we need to know the angle of incidence and the material of the prism.

If we have that information, we can calculate the critical angle and determine whether the light undergoes total internal reflection, and then calculate the index of refraction of the prism using the critical angle equation.

To know more about  internal reflection visit link :

https://brainly.com/question/30873440

#SPJ11

A runner's velocity is -10m/s. What can be said about her direction of travel?

Answers

If a runner's velocity is -10 m/s, it means that the runner is moving in the opposite direction of the positive reference point. In this case, her direction of travel can be said to be negative or moving in the opposite direction from the positive reference point.

Based on the given information, it can be said that the runner is moving in a negative direction. The negative sign indicates that the velocity is in the opposite direction of the positive direction, which is usually the assumed direction of travel. In this case, the runner is moving in the opposite direction of the assumed direction, which is toward the starting point or the initial position.

Learn more about velocity here:

https://brainly.com/question/24445340

#SPJ11


Activity 3. 2. 1 Identifying Scenarios Identify whether the the following scenarios will increase or decrease the reaction rate. Write your answer on space provided each number. ____1. Breaking a reactant into small pieces. ____2. Increasing the temperature. ____3. Diluting solutions. ____4. Adding heat

Answers

increase 1. Breaking a reactant into small pieces. increase. Increasing the temperature. decrease 3. Diluting solutions. increase 4. Adding heat

Breaking a reactant into small pieces: This will increase the reaction rate as it increases the surface area of the reactant, making it more accessible to the other reactants

Increasing the temperature: This will increase the reaction rate as it provides more thermal energy to the reactants.

Diluting the solutions: This will decrease the reaction rate as it reduces the concentration of reactants.

Adding heat: This will increase the reaction rate as it provides more thermal energy to the reactants.

To know more about Diluting solutions, here

brainly.com/question/31521767

#SPJ4

A remote sensing satellite of the earth revolves in a circular orbit at a height of 250 km above the earth surface. what is the orbital speed and period of revolution of the satellite

Answers

To find the orbital speed of the satellite, we can use the formula:

v = √(GM/r)

where G is the gravitational constant, M is the mass of the Earth, and r is the radius of the satellite's orbit.

First, we need to convert the altitude of the satellite to the radius of its orbit. The altitude of the satellite is 250 km above the surface of the Earth, so the radius of its orbit is:

r = 250 km + 6378 km = 6628 km

where 6378 km is the radius of the Earth.

Now we can plug in the values and solve for the orbital speed:

v = √(GM/r)
v = √[(6.67 × 10^-11 N·m^2/kg^2)(5.97 × 10^24 kg)/(6.628 × 10^6 m)]
v = 7667 m/s

Therefore, the orbital speed of the satellite is 7667 m/s.

To find the period of revolution of the satellite, we can use the formula:

T = 2πr/v

where T is the period of revolution.

Plugging in the values we just found, we get:

T = 2πr/v
T = 2π(6628 km × 1000)/(7667 m/s)
T = 5425 seconds

Therefore, the period of revolution of the satellite is 5425 seconds, or approximately 90.4 minutes.

a 5kw electrical heater is turned on for 10 mins to heat up the air inside a sealed, insulated and rigid container from 300 k to 400 k. what is the electrical heating efficiency?

Answers

If a 5kw electrical heater is turned on for 10 mins to heat up the air inside a sealed, insulated, and rigid container from 300 k to 400 k. The electrical heating efficiency is 3.

The electrical heating efficiency can be calculated using the formula:

Efficiency = (Heat output / Heat input) x 100%

Heat output can be calculated using the specific heat capacity of air and the mass of air inside the container:

Heat output = mass x specific heat capacity x (final temperature - initial temperature)

Assuming the mass of air inside the container is 1 kg and the specific heat capacity of air is 1.005 kJ/kg K, we can calculate the heat output as follows:

Heat output = 1 kg x 1.005 kJ/kg K x (400 K - 300 K)
Heat output = 100.5 kJ

Heat input can be calculated using the power and time of the electrical heater:

Heat input = power x time

Assuming the power of the electrical heater is 5 kW and the time it is turned on is 10 minutes (or 0.167 hours), we can calculate the heat input as follows:

Heat input = 5 kW x 0.167 hours
Heat input = 0.835 kWh or 3006 kJ

Now we can plug these values into the efficiency formula to get:

Efficiency = (100.5 kJ / 3006 kJ) x 100%
Efficiency = 3.34%

You can learn more about specific heat capacity at: brainly.com/question/29766819

#SPJ11

(A) Since both charges are positive, the electric field vectors point in opposite directions at points between the two. At point A, the magnitudes of the electric field vectors are equal and therefore
cancel out, making E = 0 at point A
Two positive charges of magnitude q are each a distance d from the origin A of a coordinate system as shown
above.

At which of the following points is the electric field least in magnitude?
(A) A (B) B (C) C (D) D (E) E

Answers

The electric field is the least in magnitude at point A due to the cancellation of the electric field vectors produced by the two positive charges. The correct option is A.

The electric field at a point due to two-point charges can be found by the principle of superposition, which states that the net electric field at a point due to multiple point charges is the vector sum of the electric fields at that point due to each individual charge.

For the given configuration, the electric field will be the least in magnitude at point A. At this point, the two charges are equidistant from point A and are both positive. The electric field vectors at points between the two charges point in opposite directions, and at point A, they have equal magnitudes but opposite directions, resulting in their cancellation and producing a net electric field of zero.

Option (B) is not true because the electric field is not necessarily smaller at point B compared to other points.

Option (C) is not true because the electric field is not necessarily smaller at point C compared to other points.

Option (D) is not true because the electric field is not necessarily smaller at point D compared to other points.

Option (E) is not true because the electric field is not necessarily smaller at point E compared to other points.

Therefore, the correct answer is (A) A.

To know more about the Electric field click :

brainly.com/question/8971780

#SPJ4

7. Choose the option from each pair that makes the following statement correct. For a nearsighted person, the [(a) near point; (B) far point] is always located closer than [(c) infinity; (d) 25 cm] from the eye and the corrective lens is [(e) converging; (f) diverging].

Answers

For a nearsighted person, the (a) near point is always located closer than (c) infinity from the eye and the corrective lens is (e) converging.

A converging lens, also known as a convex lens, is a lens that is thickest at the center and thinner at the edges. It causes parallel light rays to converge at a point called the focal point, located on the side of the lens where the light is focused. A converging lens can be used to correct nearsightedness by causing light to converge before it reaches the eye's lens, which then focuses the light onto the retina, resulting in a clear image. When the rays of light coming parallel to the principle axis after refraction through the lens pass through a point called focus, since it converges all the rays at one point, that is why it is said to be a converging lens.

To know more about a converging lens, please click on:

https://brainly.com/question/11969651

#SPJ11

pulse equality: peripheral pulse impulses should be

Answers

Pulse equality refers to the consistency and evenness of peripheral pulse impulses throughout the body. Peripheral pulses are the palpable vibrations produced by the contraction of the heart, which is transmitted through the arterial system.

They can be felt at various points on the body, such as the radial (wrist), brachial (elbow), and popliteal (knee) arteries. Assessing pulse equality is important for evaluating the circulatory system's efficiency and detecting potential problems, like blood clots or arterial blockages. A healthcare professional will compare pulses on both sides of the body, ensuring that they are equal in strength, rhythm, and volume. The presence of symmetrical, strong, and regular pulses indicates that blood flow is being effectively distributed throughout the body.

In contrast, an unequal or weak pulse may indicate a blockage, decreased blood flow, or other circulatory issues. In such cases, further investigation is necessary to identify the underlying cause and determine the appropriate course of action.

In summary, pulse equality is a vital aspect of evaluating an individual's circulatory health. Consistent and even peripheral pulse impulses suggest that the heart is efficiently pumping blood to all parts of the body, while irregularities may indicate underlying health concerns that require further examination.

Know more about blood clots here:

https://brainly.com/question/1501224

#SPJ11

As a copper wire is heated, its length increases by 0.100%. What is the change of the temperature of the wire? (aCu = 16.6 × 10-6/C°) Question 4 options:
120.4°C
60.2°C
30.1°C
6.0°C
4.5°C

Answers

The change in temperature of the wire is 60.2°C. The correct answer is (b) 60.2°C.

To solve this problem, we can use the following formula:
ΔL = αLΔT
where ΔL is the change in length of the wire, α is the coefficient of linear expansion for copper, L is the original length of the wire, and ΔT is the change in temperature.
We are given that ΔL/L = 0.100% = 0.001, α = 16.6 × [tex]10^{-6[/tex]/C°, and we want to find ΔT. Plugging in these values, we get:
0.001 = (16.6 × [tex]10^{-6[/tex]/C°) × L × ΔT
Solving for ΔT, we get:
ΔT = 0.001/[(16.6 × [tex]10^{-6[/tex]/C°) × L]
We don't have the length of the wire, but we can simplify the equation by using the fact that ΔT is proportional to 1/L. This means that if we double the length of the wire, the change in temperature will be halved, and vice versa.
Assuming that the length of the wire is 1 meter (for convenience), we get:
ΔT = 0.001/[(16.6 × [tex]10^{-6[/tex]/C°) × 1 m] = 60.2°C
Therefore, the change in temperature of the wire is 60.2°C. The correct answer is (b) 60.2°C.

Learn more about linear expansion :

https://brainly.com/question/14780533

#SPJ11

In a collision in a closed, isolated system, the total energy is conserved, but ______ energy might not be conserved.

Answers

In a collision in a closed, isolated system, the total energy is conserved, but kinetic energy might not be conserved.

When two objects collide in a closed, isolated system, the total energy of the system remains constant. However, some of the kinetic energy of the objects may be transformed into other forms of energy, such as heat, sound, or deformation of the objects themselves. This means that the kinetic energy of the objects before the collision may not be equal to the kinetic energy of the objects after the collision. The conservation of total energy in a closed, isolated system is described by the law of conservation of energy, which states that energy cannot be created or destroyed, only transformed from one form to another.

Learn more about collision here:

https://brainly.com/question/30636941

#SPJ11

Which describes the water-pool mirage commonly seen on roadways?

It is due to light from the sky that is refracted upward to an observer by a layer of hot air.
It is due to light that reflects from the road and then is refracted back down to an observer by a layer of hot air.
It is due to light that reflects from the road surface to the observer.

Answers

The water-pool mirage commonly seen on roadways is described as: "It is due to light from the sky that is refracted upward to an observer by a layer of hot air" (option a).

The water-pool mirage, also known as the highway mirage, is a visual phenomenon that occurs on hot days when there is a layer of hot air just above the surface of the road. This layer of hot air causes the light from the sky to bend or refract upward, creating the illusion of a shiny surface on the road.

This illusion can be so convincing that it appears as if there is a pool of water on the road, leading some drivers to take evasive action to avoid it. In reality, there is no actual water on the road, but rather an optical illusion caused by the bending of light.

Option a is answer.

You can learn more about mirage at

https://brainly.com/question/29910648

#SPJ11

Since all objects are "weightless" in orbit, how is it possible for an orbiting astronaut to tell if one object has more mass than another object?

Answers

An orbiting astronaut can determine if one object has more mass than another by observing their interaction with each other through gravitational force. In space, even though objects appear weightless, they still have mass and experience gravity.

Although objects are weightless in orbit, they still have mass. The amount of mass an object has determines the amount of gravitational force it exerts on other objects. Therefore, an orbiting astronaut can tell if one object has more mass than another by observing their movements in orbit. Objects with more mass exert a stronger gravitational force, causing other objects to orbit around them at a faster speed. This means that the astronaut could measure the speed of an object in orbit and use that to determine its mass. Additionally, the astronaut could use other methods, such as measuring the object's volume or density, to estimate its mass.

Learn more about gravitational here:

https://brainly.com/question/3009841

#SPJ11

the formation of raindrops by collision and coalescence of smaller cloud droplets is strongly influenced by

Answers

The formation of raindrops by collision and coalescence of smaller cloud droplets is strongly influenced by 'the size of the cloud droplets and the presence of updrafts in the cloud'.

When a cloud contains a large number of small cloud droplets, collision and coalescence can occur between these droplets. However, for raindrops to form, the cloud droplets need to grow in size. This can happen when the droplets collide with one another, but only if the droplets are of a certain size. Small droplets are more likely to collide with one another, but they may not coalesce to form a larger droplet.

The presence of updrafts in the cloud can help keep the droplets suspended in the cloud for longer, allowing them more time to grow in size. In conclusion, the size of cloud droplets and the presence of updrafts are important factors that influence the formation of raindrops by collision and coalescence.

You can learn more about coalescence at

https://brainly.com/question/30657528

#SPJ11

you want to cross a river that is 30 m wide and flows to the east at 3.0 m/s. you can swim at a speed of 6.0 m/s (relative to the water). if you start from the south side of the river and want to go straight across, at what angle should you point yourself?

Answers

You should swim at an angle of 30 degrees relative to the line perpendicular to the riverbank.

To cross the river, you need to swim in a direction that has a horizontal component equal to the width of the river, and a vertical component that compensates for the downstream motion of the river. Let's call the angle between the direction you swim and the line perpendicular to the riverbank "theta".

The horizontal component of your velocity is:

Vx = [tex]V_swim * cos(theta)[/tex]

The vertical component of the river's velocity is:

[tex]Vy_river = -3.0 m/s[/tex] (negative because it flows downwards)

The vertical component of your velocity needs to be equal and opposite to the vertical component of the river's velocity, so:

Vy = - [tex]Vy_river = 3.0 m/s[/tex]

The vertical component of your velocity is:

Vy = [tex]V_swim * sin(theta)[/tex]

So:

[tex]sin(theta) = Vy / V_swim = 3.0 m/s / 6.0 m/s = 0.5[/tex]

And:

[tex]theta = arcsin(0.5) = 30 degrees[/tex]

Therefore, you should swim at an angle of 30 degrees relative to the line perpendicular to the riverbank.

Learn more about vertical component

https://brainly.com/question/31684355

#SPJ4

when the current is at a maximum, what are the magnitudes of the potential differences across the resistor, the inductor, and the ac source?

Answers

When the current is at a maximum in an AC circuit, the potential difference across the resistor is maximum, the potential difference across the inductor is zero, and the potential difference across the AC source is also maximum.

When the current is at its maximum, the voltage across the resistor is also at its maximum because the voltage and current are in phase with each other. The voltage across the inductor is zero because the inductor opposes any changes in current, and when the current is maximum, there is no change in current. The voltage across the AC source is also maximum because the source is the driving force behind the current and is responsible for maintaining it at its maximum. It is important to note that these potential differences are constantly changing in an AC circuit as the current and voltage alternate in polarity and direction.

In conclusion, when the current is at its maximum in an AC circuit, the potential difference across the resistor is maximum, the potential difference across the inductor is zero, and the potential difference across the AC source is also maximum. These potential differences are constantly changing as the current and voltage alternate in an AC circuit.

You can learn more about AC circuit at

https://brainly.com/question/29439490

#SPJ11

if the starting rtt variation is 500msec, what is the final value of the timeout interval (in msec)?

Answers

The final value of the timeout interval (in msec) can be found by the formula RTO = SRTT + 4 * RTT_dev.

To calculate the final value of the timeout interval (in msec) when the starting RTT variation is 500 msec, we need to consider the terms:

RTT (Round-Trip Time), RTO (Retransmission Timeout), and the constants K and G.

Step 1: Calculate the weighted RTT variation (SRTT) using the formula:
SRTT = (1 - K) * SRTT + K * RTT_variation
Assuming K = 0.125, we have:
SRTT = (1 - 0.125) * SRTT + 0.125 * 500

Step 2: Calculate the weighted RTT deviation (RTT_dev) using the formula:
RTT_dev = (1 - G) * RTT_dev + G * |SRTT - RTT_variation|
Assuming G = 0.25, we have:
RTT_dev = (1 - 0.25) * RTT_dev + 0.25 * |SRTT - 500|

Step 3: Calculate the final value of the timeout interval (RTO) using the formula:
RTO = SRTT + 4 * RTT_dev

As we don't have the initial values of SRTT and RTT_dev, we can't provide a specific numeric answer. However, you can use these formulas and plug in the initial values to calculate the final value of the timeout interval (in msec).

Learn more about interval:

https://brainly.com/question/1503051

#SPJ11

a physics student with a stopwatch drops a rock into a very deep well and measures the time between when he drops the rock and when he hears the sound of the rock hitting the water below. if the speed of sound is 343 m/s, and the student measures a time of 4.50 s, how deep is the well? type your answer here

Answers

The depth of the well is approximately  161.08 meters, which rounds to 385 meters when the speed of sound is 343 m/s.

Given:

Speed of sound (v) = 343 m/s

Total time measured by the student (t) = 4.50 s

The time it takes for the sound to travel back up:

t = t₁ + t₂

t₂ = t₁

Now, solve for t₁

t₁ = t ÷ 2

t₁ = 4.50 ÷ 2

t₁ = 2.25 s

Finally, let's calculate the depth (d) using the formula:

d = (v × t₁) ÷ 2

d = (343 × 2.25) ÷ 2

d = 161.08 m

Therefore, The depth of the well is approximately 385.125 meters, which rounds to 385 meters.

To know more about the speed of sound:

https://brainly.com/question/32259336

#SPJ12

To measure a star’s parallax angle accurately, you should observe a star’s location against background stars___A.on one night.B.on two nights separated by one year.C.on two nights separated by 6 months.D.on many nights over the course of 6 months.E.on many nights over the course of a year.

Answers

To measure a star's parallax angle accurately, you should observe a star's location against background stars on two nights separated by 6 months. So, the correct option is C.

This is because parallax is the apparent shift in the position of a nearby object against a more distant background as the observer moves. By observing the star's position against background stars six months apart, the observer can measure the angle between the two observations, allowing for an accurate measurement of the star's distance.

Observing the star's position on one night or over the course of many nights may not provide enough data points to accurately measure the parallax angle.

You can learn more about parallax angles at: brainly.com/question/20296211

#SPJ11

In using the cosine-squared rule, what angle is substituted into the argument of the cosine?

The angle between the vertical axis and the polarizing axis of the polarizing sheet.
The angle between the horizontal axis and the polarizing axis of the polarizing sheet.
The angle between the polarization of the incident light and the polarizing axis of the polarizing sheet.

Answers

In using the cosine-squared rule, the angle that is substituted into the argument of the cosine is c. the angle between the polarization of the incident light and the polarizing axis of the polarizing sheet.

The cosine-squared rule is used to calculate the intensity of light after it passes through a polarizing sheet. The formula for the cosine-squared rule is I = I0cos^2θ, where I0 is the initial intensity of the light and θ is the angle between the polarization of the incident light and the polarizing axis of the polarizing sheet.

By substituting this angle into the cosine-squared rule, we can calculate the intensity of light that passes through the polarizing sheet. It is important to note that the intensity of light will vary depending on the angle between the polarization of the incident light and the polarizing axis of the polarizing sheet, which is why it is crucial to use the correct angle in the formula. In using the cosine-squared rule, the angle that is substituted into the argument of the cosine is c. the angle between the polarization of the incident light and the polarizing axis of the polarizing sheet.

learn more about polarizing axis here:

https://brainly.com/question/31416311

#SPJ11

Calculate empirical formula of each compound: A. 94.1% O, 5.9% HB. 67.6% Hg, 10.8% S, 21.6% O

Answers

A. To calculate the empirical formula, we first need to find the molar ratios of the elements in the compound.

For compound A:
- 94.1% O = 5.88 mol O
- 5.9% H = 5.9 mol H

To find the empirical formula, we need to divide each of these numbers by the smallest number of moles:
- 5.88 mol O / 5.88 mol = 1 O
- 5.9 mol H / 5.88 mol = 1.01 H

The empirical formula of compound A is OH.

For compound B:
- 67.6% Hg = 1.00 mol Hg
- 10.8% S = 0.34 mol S
- 21.6% O = 1.35 mol O

Dividing by the smallest number of moles:
- 1.00 mol Hg / 0.34 mol = 2.94 Hg
- 0.34 mol S / 0.34 mol = 1 S
- 1.35 mol O / 0.34 mol = 3.97 O

Rounding to the nearest whole number:
- The empirical formula of compound B is Hg3S4O4.

To know more about compound empirical formula click this link-

brainly.com/question/21185029

#SPJ11

Other Questions
Bacteria capable of producing a protective coating that allows them to withstand very harsh environments, and shed the coating when conditions become more favorable is called ___ why should you have a job search plan when starting to look for a job? to help you decide what type of resume to develop. to help you showcase your abilities better. to help provide you with experience and information that will help you do better in the next interview. a job search plan will provide focus for your job search. which one of the following is an example of systematic risk? question 55 options: investors panic causing security prices around the globe to fall precipitously a flood washes away a firm's warehouse a city imposes an additional one percent sales tax on all products a toymaker has to recall its top-selling toy corn prices increase due to increased demand for alternative fuels fill in the blank. In an automobile manufacturing plant, assembly-line workers' wages are __ __ costs.direct labor i flip a coin 10 times and record the proportion of heads i obtain. i then repeat this process of flipping the coin 10 times and recording the proportion of heads obtained many, many times. when done, i make a histogram of my results. this histogram represents group of answer choices the sampling distribution of the proportion of heads in 10 flips of the coin. the true population parameter. simple random sampling. the bias, if any, that is present. a binomial distribution. 100. A diamond-shaped sign is aA. Road hazard sign.B. Interstate route sign.C. School crossing sign.D. Speed limit sign. what are the three phases of Kohlberg's moral development? what integral 2x(x-3) dx is DThomas is planning a party at his house. He is purchasing food, drinks, and household supplies for this party so he sets a budget of $500. He purchases 5 pizzas for $11.99 per pizza, 3 cases of soda for $5.99 per case, 2 bags of chips for $3.99 per bag, salsa for $5.99, a cake for $6, 2 pies for $7.99 each, toiletries for $25, tablecloths, napkins, and utensils for $16. At the end of the party, him and his 7 guests had eaten only of the pizzas and and of the bags of chips. How much pizza and chips were left over? How much money did he spend total on items for the party? How much money did he have left over? Round all values to the nearest dollar. Round your answer to the nearest dollar as well. The D value (decimal reduction time) at 60oC is 0.4 minutes.Hence a cooking period of 3 minutes at 60oC is equal to:a)105 Salmonella/g being reduced to 1 Salmonella/gb) 105 Salmonella/g being reduced to 0.01 Salmonella/gc) 108 Salmonella/g being reduced to 101 Salmonella/gd) 105 Salmonella/g being reduced to 101 Salmonella/g What is the most common cause of nephrotic syndrome in the elderly? the training of data collectors to adhere strictly to a standard protocol for a research project will affect the ultimate outcome of the study by doing what? one way to provide artificial gravity (i.e., a feeling of weight) on long space voyages is to separate a spacecraft into two parts at the ends of a long cable, and set them rotating about their center of mass. a craft has been separated into two parts with a mass of 95600 kg each, at the ends of a cable with their centers of mass 87 m apart, rotating around the center point of the cable with a period of 182.9 seconds. newperiod if the cable is reeled in so that the the centers of the two pieces are now only 53.07 m apart, what will be the new period? Which finding will the nurse most likely observe when performing a health screening of an older adult female client who has loss of bone density? 23. adrian chase, a portfolio manager, generates a return of 14% when the benchmark returns 11.5%. the manager's security selection decisions outperform by 150 basis points. which is least accurate? a. asset allocation decisions helped the manager outperform the benchmark. b. the manager outperforms the benchmark by 250 basis points. c. the manager excelled in both asset allocation and security selection decisions. d. asset allocation decisions outperform by 250 basis points. what is the name of the book that st. john paul ii (karol wojtyla, at the time) wrote in the late 1950s about love? A CPU accesses 100 program instructions. Each memory access takes 5 ns. The memory can only hold 50 instructions. The first 50 instructions are already in memory. Replacing those 50 by the next 50 takes 400 ns. What is the total time? Given the following reactionsN (g) + O (g) 2NO (g) H = +180.7 kJ2NO( g) + O (g) 2NO (g) H = -113.1 kJthe enthalpy for the decomposition of nitrogen dioxide into molecular nitrogen and oxygen2NO (g) N (g) + 2O (g)is ________ kJ. Which determines the spatial resolution of a display ?a. number of pixelsb. number of lines on the displayc. number of bits per pixeld. spatial pulse length Name the 3 Eras of Dependency Theory in modern history