A brass cube, 10 cm on a side, is raised in temperature by 200°C. The coefficient of volume expansion of brass is 57 ´ 10-6/C°. By what percentage is any one of the 10-cm edges increased in length?

The relationship between period (T) and frequency (f) is that they are inversely proportional to each other. The relationship is expressed using the equation  f = 1/T or T = 1/f.

The relationship between period and frequency is inverse. Period refers to the time taken to complete one full cycle of a waveform, while frequency is the number of complete cycles that occur in one second. Mathematically, the relationship can be expressed as:

Frequency (f) = 1 / Period (T)  or  Period (T) = 1 / Frequency (f)

This means that as the frequency of a waveform increases, the period decreases, and vice versa. For example, if the frequency of a waveform is 50 Hz, then the period would be 1/50 = 0.02 seconds. Conversely, if the period of a waveform is 0.01 seconds, then the frequency would be 1/0.01 = 100 Hz.

In summary, the relationship between period and frequency is inverse, and can be expressed using the equations f = 1/T or T = 1/f.

More on period and frequency: https://brainly.com/question/29027542

#SPJ11

An individual copper atom emits electromagnetic radiation with wavelengths that are characteristic of the energy transitions occurring within the atom's electron configuration.

An individual copper atom emits electromagnetic radiation with wavelengths that are specific and unique to the energy transitions occurring within the atom. These wavelengths can range from ultraviolet to infrared and can be used to identify the element present in a sample through spectroscopy.

Electromagnetic radiation from a single copper atom has wavelengths that are typical of the energy changes taking place within the atom's electron configuration.

Electromagnetic radiation from a single copper atom has wavelengths that are particular and exclusive to the energy changes taking place inside the atom. These wavelengths, which can range from ultraviolet to infrared, can be utilised in spectroscopy to determine the element present in a sample.

To know more about electromagnetic radiation click here:

https://brainly.com/question/1408043

#SPJ11

If your body resistance is 100,000 ohms, then the current which would flow would be: 120v/100,000Ω=0.0012 amperes, which equals 1.2mA.

Answer:

26.8%

Explanation:

On the cosmic calendar, which compresses the history of the universe into a single year, Earth formed very early in January.

More specifically, it is estimated that Earth formed about 4.5 billion years ago, which would correspond to the first few days of January on the cosmic calendar. This means that the vast majority of cosmic history occurred before the formation of Earth, including the Big Bang, the formation of stars and galaxies, and the emergence of life in other parts of the universe.

It is fascinating to think about the vast scale of time and the relative insignificance of Earth in the context of the entire universe. The cosmic calendar is a useful tool for visualizing this scale and understanding the history of our planet in relation to the larger cosmic picture.

By compressing billions of years into a single year, we can better appreciate the incredible processes and events that have shaped our world and the universe as a whole. Overall, the formation of Earth in early January is just one small part of the incredible story of cosmic history.

For more such questions on Cosmic calendar.

https://brainly.com/question/28536089#

#SPJ11

Option C is correct. 7.5 Mhz, 8 mm beam diameter, 2 cycles per pulse used to pulse would lateral resolution be worst.

The lateral resolution is the ability of the ultrasound system to distinguish between two structures that are close together side by side. The higher the frequency and the smaller the beam diameter, the better the lateral resolution.
So, based on the given options, the pulse with the worst lateral resolution would be:
c. 7.5 Mhz, 8 mm beam diameter, 2 cycles per pulse

Spatial resolution is the ability of a device or system to distinguish between two or more objects separated by a certain distance. It is measured in terms of the number of pixels in an image or the number of dots per inch (DPI) in a printed image. It is an important factor in determining the quality of an image. High spatial resolution enables the user to see more detail in the image, whereas low spatial resolution results in a blurred or pixelated image. Spatial resolution is also important for applications such as remote sensing, where high resolution is needed to identify objects on the ground.
This is because the frequency is not very high, and the beam diameter is quite large, which means that the system will not be able to distinguish between structures that are close together as well as it would with the other options. The 2 cycles per pulse is not as relevant to lateral resolution as the other factors mentioned.

Learn more about Spatial resolution  here

https://brainly.com/question/30753488

#SPJ11

To solve for the ideal gas with density or molar mass, you can use the ideal gas law equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

If you know the molar mass of the gas, you can find the number of moles by dividing the mass of the gas by the molar mass. From there, you can use the ideal gas law equation to solve for the density or volume of the gas.

On the other hand, if you know the density of the gas, you can find the molar mass by dividing the density by the molar volume of the gas, which is equal to the gas constant R times the temperature divided by the pressure. Once you have the molar mass, you can use the ideal gas law equation to solve for the number of moles, volume, or pressure of the gas.

Overall, the key strategy for solving for an ideal gas with density or molar mass is to use the ideal gas law equation and manipulate it to solve for the unknown variables. Remember that if you know one variable, you can always use the ideal gas law to solve for the others.

Read more about Ideal Gas at https://brainly.com/question/31463642

#SPJ11

To solve this problem, we can use the formula for average velocity:
average velocity = (final velocity + initial velocity) / 2

We know that the average velocity of the jetliner while taxiing to a stop is -35 km/h. We also know that it takes 7.00 s for the plane to come to rest, so its final velocity is 0 km/h.

Using the formula above, we can solve for the initial velocity:
-35 = (0 + initial velocity) / 2

Multiplying both sides by 2, we get:
-70 = initial velocity

Therefore, the plane's initial velocity was -70 km/h.

Now we can use the formula for acceleration:
acceleration = (final velocity - initial velocity) / time

We know that the final velocity is 0 km/h, the initial velocity is -70 km/h, and the time it takes to come to rest is 7.00 s. Plugging these values into the formula, we get:
acceleration = (0 - (-70)) / 7

Simplifying, we get:
acceleration = 10 km/h/s

Therefore, the plane's acceleration was 10 km/h/s.

To know more about average velocity:

https://brainly.com/question/11265533

#SPJ11

Counting one, two, three after the vehicle ahead has started to move is an important step to follow when stopped at an intersection behind another vehicle. This ensures that you have enough space to move your vehicle without endangering yourself or others on the road.

This step allows you to check if the vehicle ahead has fully cleared the intersection and it also gives you time to check your rearview mirrors before you place your vehicle in motion.

Checking your rearview mirrors before moving is essential as it enables you to assess the situation behind you, including the presence of any vehicles or pedestrians.

By following this step, you can ensure that you have adequate time and space to maneuver safely on the road, reducing the risk of accidents and keeping yourself and others safe.

It is important to remember to be patient and not to rush, as taking a few extra seconds to assess the situation can make all the difference in avoiding a collision.

For more such answers on road safety

https://brainly.com/question/595072

#SPJ11

The frequency at which a listener will be able to correctly perceive the tone pitch for a 9.5 ms burst of sinusoidal sound will depend on the specific characteristics like frequency, intensity and duration of the sound, as well as the listener's age and hearing ability of the sound wave.

In general, pitch perception is determined by the frequency of the sound wave, which is the number of cycles of the wave that occur per second. For example, a sound wave with a frequency of 440 Hz is perceived as the musical note A.

However, it is worth noting that other factors, such as the intensity and duration of the sound, as well as the listener's age and hearing ability, can also affect pitch perception.

Therefore, in order to determine the frequency at which the tone pitch can be correctly perceived, we need to know the frequency of the sinusoidal wave used in the 9.5 ms burst. If the frequency is within the range of human hearing (roughly 20 Hz to 20,000 Hz), and if the listener's auditory system is functioning properly, then they should be able to perceive the tone pitch.

for more information on sinusoidal : https://brainly.com/question/24336803

#SPJ11

Comparing the electrostatic force and the gravitational force, we can say that they both are fundamental forces in nature, but they differ in their strength and type of interaction.

The electrostatic force is the force of attraction or repulsion between two charged particles due to their electric charges, whereas the gravitational force is the force of attraction between any two masses in the universe.

The electrostatic force is much stronger than the gravitational force, as it depends on the inverse square of the distance between the charges, while the gravitational force depends on the inverse square of the distance between the masses.

This means that for the same charges/masses and the same distance between them, the electrostatic force will be much stronger than the gravitational force.

Moreover, the electrostatic force can be either attractive or repulsive, depending on the sign of the charges, whereas the gravitational force is always attractive. The electrostatic force also acts instantaneously, while the gravitational force travels at the speed of light.

Overall, while both forces have their unique characteristics and effects, the electrostatic force is much stronger and more diverse in its interactions than the gravitational force.

To know more about electrostatic force click here:

https://brainly.com/question/9774180

#SPJ11

The tangential speed of the ant on the turntable is approximately 7.14 m/sec.

The tangential speed of an object in circular motion is the speed of the object tangent to the circle at any given point. It can be calculated by multiplying the radius of the circle by the angular speed (in radians per second) of the object.

In this case, the ant is located 0.114 m from the axis of rotation, and the turntable is rotating at 6.5 rev/sec. We need to convert this angular speed to radians per second, since the equation for tangential speed requires an angular speed in radians per second.

One revolution is equal to 2π radians, so the angular speed of the turntable in radians per second is:

6.5 rev/sec × 2π radians/rev = 41π/5 radians/sec

Now we can use the equation for tangential speed:

Tangential speed = radius × angular speed

Tangential speed = 0.114 m × 41π/5 radians/sec

Tangential speed = 2.27π m/sec ≈ 7.14 m/sec

Therefore, the tangential speed of the ant on the turntable is approximately 7.14 m/sec.

To learn more about turntable visit:

https://brainly.com/question/15695858

#SPJ11

The distance traveled by the mace is 4π meters.

When the knight swings the mace in two complete circles, the mace travels a distance equal to the circumference of two circles with radius 1m. The formula for the circumference of a circle is given by:

C = 2πr

where C is the circumference and r is the radius.

For each complete circle, the circumference is:

C = 2π(1m) = 2π m

So, for two complete circles, the total distance traveled by the mace is:

distance = 2C = 2(2π m) = 4π m

Therefore, the distance traveled by the mace is 4π meters.

To learn more about distance traveled visit: https://brainly.com/question/29055485

#SPJ11

The total magnetic flux through the cylinder is zero.

To determine the magnetic flux through the cylinder, we can use the formula:

Φ = ∫ B · dA

where Φ is the magnetic flux, B is the magnetic field, and dA is an

infinitesimal area element.

Since the wire is placed along the axis of the cylinder, the magnetic field

will have a constant magnitude along any circle with the same radius as

the wire. The magnitude of the magnetic field at a distance r from the

wire is given by:

B = μ₀I/(2πr)

where μ₀ is the permeability of free space, I is the current in the wire, and r is the distance from the wire.

To determine the total magnetic flux through the cylinder, we need to

integrate the magnetic field over the surface of the cylinder. We can use

cylindrical coordinates for this integration, with the z-axis along the axis of the cylinder.

The infinitesimal area element in cylindrical coordinates is given by:

dA = r · dz · dθ

where r is the radius of the circle, dz is the infinitesimal height element,

and dθ is the infinitesimal angle element.

Since the wire is placed along the z-axis, the magnetic field will be

perpendicular to the area element dA, so we only need to consider the

component of the magnetic field that is perpendicular to the surface of

the cylinder. This component is given by:

B·cos(θ) = μ₀I/(2πr) · cos(θ)

where θ is the angle between the vector pointing from the wire to the

surface element and the z-axis.

Integrating over the surface of the cylinder, we have:

Φ = ∫∫ B·cos(θ) · r · dz · dθ

= ∫₀²π ∫₀⁰⁵ B·cos(θ) · r · dz · dθ

= ∫₀²π ∫₀⁰⁵ μ₀I/(2πr) · cos(θ) · r · dz · dθ

= μ₀I/2π ∫₀²π ∫₀⁰⁵ cos(θ) · dz · dθ

= μ₀I/2π ∫₀²π 0 · dθ

= 0

for such more question on magnetic flux

https://brainly.com/question/18597382

#SPJ11

The minimum distance the boy can walk from point A to the right end of the beam without tipping it over is 3.75 meters.

We need to balance the torques acting on the beam.

The torque is given by:

Torque_boy = weight_boy x distance_to_support

The torque created by the beam's weight is given by:

Torque_beam = weight_beam x (distance_between_supports/2)

where weight_beam = 300 N and distance_between_supports = 5.00 m.

For the beam to remain balanced, we need to ensure that Torque_boy is less than or equal to Torque_beam. Therefore, we can set up the following inequality:

600 N x (9.00 m - x) ≤ 300 N x (5.00 m/2)

Simplifying and solving for x, we get:

x ≤ 3.75 m

To know more about torques, here

brainly.com/question/25708791

#SPJ4

--The complete Question is, What is the minimum distance the boy can walk from point A to the right end of the beam, without tipping it over? Assume that the boy's weight is evenly distributed, and neglect any friction between the beam and the supports. (Hint: The beam will tip over when the torque created by the boy's weight exceeds the torque created by the beam's weight.) --

The final temperature of the mixture will be 50 0C.

To determine the final temperature, we can use the principle of conservation of energy, which states that the total amount of energy in a system remains constant.

The amount of energy lost by the hot water is equal to the amount of energy gained by the cool water:

m_hotwater * c_water * (T_final - T_hotwater) = m_coolwater * c_water * (T_final - T_coolwater)

where m_hotwater is the mass of the hot water, m_coolwater is the mass of the cool water, c_water is the specific heat capacity of water, T_final is the final temperature of the mixture, T_hotwater is the initial temperature of the hot water, and T_coolwater is the initial temperature of the cool water.

Plugging in the values given:

(1 kg * 4.18 J/gC * (T_final - 90)) = (2 kg * 4.18 J/gC * (T_final - 10))

Solving for T_final:

4.18 J/gC * T_final - 4.18 J/gC * 90 = 8.36 J/gC * T_final - 83.6 J/gC

-4.18 J/gC * T_final + 8.36 J/gC * T_final = -83.6 J/gC + 4.18 J/gC * 90

4.18 J/gC * T_final = 209.6 J/gC

T_final = 50 0C

Therefore, the final temperature of the mixture will be 50 0C.

To learn more about mixture visit:

https://brainly.com/question/24898889

#SPJ11

The proton-proton chain is a series of nuclear reactions responsible for fusing hydrogen into helium in stars like our Sun, producing the energy that sustains life on Earth.

The proton-proton chain is a specific set of nuclear reactions through which the Sun and other stars primarily fuse hydrogen into helium. This process occurs in the core of the Sun, where temperatures and pressures are incredibly high.
The proton-proton chain begins when two protons (hydrogen nuclei) collide and undergo nuclear fusion to form a deuterium nucleus, which consists of one proton and one neutron. This reaction also releases a positron and a neutrino as byproducts.
Next, the deuterium nucleus fuses with another proton to create a helium-3 nucleus, consisting of two protons and one neutron. This reaction releases a gamma-ray photon, which carries away the excess energy.
Finally, two helium-3 nuclei combine to form a helium-4 nucleus, which contains two protons and two neutrons. This reaction releases two excess protons that can participate in further proton-proton chain reactions.
Overall, the proton-proton chain effectively converts four hydrogen nuclei (protons) into one helium nucleus, with the release of energy in the form of gamma-ray photons and neutrinos. This energy is responsible for the Sun's heat and light output, which supports life on Earth.
The proton-proton chain is not the only nuclear fusion process occurring in stars, but it is the dominant one for stars like our Sun. Other processes, such as the CNO cycle, can also fuse hydrogen into helium but play a more significant role in more massive stars.
For similar question on proton-proton chain

https://brainly.com/question/11736501

#SPJ11

There are 2 such states for which the magnetic quantum number isml= 0.

For a hydrogen atom in a state with the principal quantum number n = 3, the maximum value of the magnetic quantum number ml is 2. Therefore, there are three possible values of ml for n = 3: -2, -1, 0, 1, and 2.

However, the question asks for the number of states in which the magnetic quantum number ml is equal to zero. This means that only one of the five possible values of ml is allowed.

The number of possible states is given by the formula 2l + 1, where l is the orbital angular momentum quantum number. For ml = 0, l = 0, which means there is only one possible state. Therefore, the correct answer is c. 2

Learn more about hydrogen

brainly.com/question/28937951

#SPJ11

The 92.96% Hg and 7.04% O composition of the compound can be found by calculating the mass of oxygen that was present in the original sample.

To do this, we can use the fact that the total mass of the sample was 14.2g and that 13.2g of this was due to the mercury that was obtained after decomposition. This means that the mass of oxygen present in the original sample was:

14.2g - 13.2g = 1g

Next, we can calculate the % composition of the compound as follows:

% Hg = (mass of Hg / total mass of compound) x 100%
% Hg = (13.2g / 14.2g) x 100%
% Hg = 92.96%

% O = (mass of O / total mass of compound) x 100%
% O = (1g / 14.2g) x 100%
% O = 7.04%

Therefore, the % composition of the compound is:

92.96% Hg and 7.04% O.

To know more about composition of the compound click here:

https://brainly.com/question/1194814

#SPJ11

T`he position of the 0.64-kg mass at t = 5.0 s is 0.138 m.

To find the position of the 0.64-kg mass undergoing simple harmonic motion at t = 5.0 s, we need to substitute t = 5.0 s into the given equation for x:
x = (0.160 m) cos (π/16)
x = (0.160 m) cos [(π/2) (5.0 s)/16]
x = (0.160 m) cos (π/6)
[tex]x = (0.160 m) (\sqrt{(3)/2} )[/tex]
x = 0.138 m
Therefore, the position of the 0.64-kg mass at t = 5.0 s is 0.138 m. It is important to note that in simple harmonic motion, the position of the mass oscillates back and forth around its equilibrium position with a certain amplitude and period. The given equation represents the position of the mass as a function of time, and the cosine function describes the oscillatory behavior.

The period of the motion is 32 s (since the argument of the cosine function goes through a full cycle every 32 s), and the amplitude of the motion is 0.160 m (since that is the maximum displacement from equilibrium). Understanding the behavior of simple harmonic motion is important in many fields, including physics, engineering, and mathematics.

For more such questions on position visit:

https://brainly.com/question/2364404

#SPJ11

Answer:

The tension in the piano wire producing a C note (f=256 Hz) with a length of 1.00m and mass density of 2.50g/m is approximately 158 N.

Explanation:

Answer: Foam insulation makes metal simpler to handle and less likely to burn or injure people by preventing heat transfer from the metal. The foam also offers a more pleasant grip, increasing safety and making it simpler to handle the metal.

Explanation:

The reason for using foam insulation instead of directly handling the metal is to prevent any potential harm that could result from exposure to it. Metal can become really hot or cold which can cause physical discomfort or even injury if prolonged. Furthermore, the foam insulation serves to stop the transfer of heat or cold from the metal to the hands, keeping the person handling it comfortable and safe. Therefore, foam insulation acts as a protective barrier, shielding the metal from direct contact with the person's skin.

To learn more about foam insulation :

https://brainly.com/question/18943100

https://brainly.com/question/6339244

When a mass oscillates on a vertical spring, the period of oscillation is determined by the force constant of the spring and the mass of the object attached to it. However, the acceleration due to gravity also plays a role in this oscillation.

On the Moon, the acceleration due to gravity is much smaller than on Earth. Therefore, the period of oscillation of the spring-mass system will increase. This is because the force of gravity acting on the mass is much smaller, causing the mass to move slower back and forth, and hence increasing the time taken for one complete oscillation.
The relationship between the period of oscillation and the force of gravity can be described by the equation:
T = 2π√(m/k)
where T is the period of oscillation, m is the mass attached to the spring, and k is the spring constant.
Since the mass and spring constant remain constant regardless of the location, the only factor that changes on the Moon is the acceleration due to gravity. As the acceleration due to gravity is less on the Moon than on Earth, the period of oscillation will be longer.
In summary, when the whole setup is taken to the Moon, the period of oscillation of the spring-mass system will increase due to the reduced acceleration due to gravity.

For more such questions on oscillation visit:

https://brainly.com/question/29813582

#SPJ11

The final temperature of both the water and aluminum is 32.2°C.

First, let's find the heat energy gained by the water:

mass of water = 121 g = 0.121 kg

specific heat of water = 4.184 J/g°C = 4.184 kJ/kg°C

The initial temperature of water is 20°C and the final temperature is the same as the final temperature of aluminum. So, we have:

Q_water = (0.121 kg)(4.184 kJ/kg°C)(T_f - 20°C)

Next, let's find the heat energy lost by the aluminum:

mass of aluminum = 193 g = 0.193 kg

specific heat of aluminum = 0.910 kJ/kg°C

The initial temperature of aluminum is 71°C and the final temperature is the same as the final temperature of water. So, we have:

Q_aluminum = (0.193 kg)(0.910 kJ/kg°C)(71°C - T_f)

Since the total heat energy lost by aluminum must equal the total heat energy gained by water, we can set these two equations equal to each other:

(0.121 kg)(4.184 kJ/kg°C)(T_f - 20°C) = (0.193 kg)(0.910 kJ/kg°C)(71°C - T_f)

Simplifying and solving for T_f, we get:

T_f = 32.2°C

Therefore, the final temperature of both the water and aluminum is 32.2°C.

To learn more about aluminum visit:

https://brainly.com/question/9496279

#SPJ11

If the board has a non-zero mass of 26 kg, the placement of the pivot for balance would be different than if it had zero mass. To find the new pivot point, we need to take into account the weight of the board. The pivot point should be placed at a distance from the center of mass of the board so that the moments on both sides of the pivot are equal.

To calculate the pivot point, we need to use the equation:

M1 x d1 = M2 x d2

Where M1 and M2 are the masses on either side of the pivot, and d1 and d2 are the distances from the pivot to each mass. In this case, we have one mass (the person) on one side of the pivot, and the board on the other side. We can assume the person has a negligible mass compared to the board.

Let's say the person is standing 1 meter from the pivot. We also need to know the center of mass of the board, which we can assume is at the center of the board. If the board is 2 meters long, the center of mass would be 1 meter from either end.

Using the equation above, we can set up the following equation:

26 kg x (d1) = 60 kg x (2 - d1)

Solving for d1, we get:

d1 = 1.23 meters

So the pivot should be placed 1.23 meters from the end of the board where the person is standing in order to balance the board with a non-zero mass of 26 kg.

To know more about pivot click here:

https://brainly.com/question/31261482

#SPJ11

When a parallel plate capacitor is charged and disconnected from the battery, the electric field between the plates decreases when the plates are pulled a small distance farther apart.

The capacitance of a parallel plate capacitor is given by the equation C = εA/d, where C is capacitance, ε is the permittivity of the dielectric material between the plates, A is the area of the plates, and d is the distance between the plates. As the distance between the plates increases, the capacitance of the capacitor decreases, since there is less electric field between the plates for a given charge. This means that the electric field strength between the plates also decreases, since the electric field is directly proportional to the charge divided by the distance between the plates.

Learn more about capacitance here:

https://brainly.com/question/28445252

#SPJ11

0.831 J is the rotational kinetic energy of the sculpture

What do you mean by kinetic energy in rotation and translation?

The coordinated (non-random) movement of mass with respect to a certain reference frame involves both of them as the energy of motion. There is only one distinction between rotational and translational kinetic energy: translational energy moves in a straight line, but rotational energy does not.

As the sculpture rotates at a constant angular velocity,  we can calculate that angular velocity using the formula = A0/A1, where A0 equals 2л rad for one rotation, and At=T, where T denotes the motion's period.

This angular velocity expression can be substituted into K = 1/2 I ω2

K =1/2 l[2л/T]2 (substitute ω = 2л/T)

K = (0.379 kg - m2) (24) 3.00 s =0.831 J

To learn more about rotational kinetic energy use:

https://brainly.com/question/30459585

#SPJ1

Answer:

Latent heat of vaporization.

1 g of water at 100 C becomes 1 g  of steam at 100 C after adding 540 calories to the water - likewise 1 g of steam at 100 C emits 540 calories when converted to 1 g water at 100 C

The correct option about irregular galaxies is that they have ongoing star formation.  Irregular galaxies typically lack well-defined structures, such as disks or spiral arms, and often exhibit ongoing star formation, leading to a mix of young and old stars.

Irregular galaxies are characterized by their asymmetrical, chaotic shape and lack of a clear structure or spiral arms. They typically have young, hot stars that are actively forming, which is why they have ongoing star formation. They may also have older stars, but they are not the predominant type in irregular galaxies. Irregular galaxies can have a range of colors, including reddish hues, but this is not a defining characteristic. They also do not usually have a disk component or well-defined spiral arms.

To know more about Irregular galaxies:

https://brainly.com/question/30799703

#SPJ11