A college student surveyed fellow students in order to determine a 90% confidence interval on the proportion of students who plan on voting in the upcoming student election for Student Government Association President. Of those surveyed, it is determined that 97 plan on voting and 154 do not plan on voting. (a) Find the 90% confidence interval. Enter the smaller number in the first box. Confidence interval:( b) Which of the following is the correct interpretation for your answer in part (a)? A. We can be 90% confident that the proportion of students who will vote in the upcoming election lies in the interval B. We can be 90% confident that the number of students who will vote in the upcoming election lies in the interval. C. There is a 90% chance that the proportion of students who will vote in the upcoming election lies in the interval D. We can be fairly sure that 90% of the students will vote in the upcoming election lies in the interval E. None of the above

Answer:

Step-by-step explanation:

To find the total area of the track, we need to calculate the area of each section and then add them together.

Area of a semi-circle with radius 31m:

A = (1/2)πr^2

A = (1/2)π(31m)^2

A = 4795.4m^2

Area of a rectangle with length 92.7m and width 31m (the straight parts):

A = lw

A = (92.7m)(31m)

A = 2873.7m^2

To find the total area, we need to add the areas of the two semi-circular ends and the two straight sections:

Total area = 2(Area of semi-circle) + 2(Area of rectangle)

Total area = 2(4795.4m^2) + 2(2873.7m^2)

Total area = 19181.6m^2

Rounding this to 1 decimal place, we get:

Total area ≈ 19181.6 m^2

Therefore, the total area of the track is approximately 19181.6 square meters.

The given scenario involves the use of consistent estimators and the concept of MVUE.

The given scenario involves independent samples from two populations, Xn and Y1, Y2...Yn, with means uy and uy and variances 012 and oz2, respectively. The estimator of u1 - u2 is I - Ỹ, which is a consistent estimator.

Further, the estimator of o2 is Σ(Xi - u1)2 + Σ(Yi - u2)2 / 2n-2. It is consistent, but it is not an MVUE of o2.

However, the estimator of o2 can be written as ô2 = Sy1 + Sy2, where Sy1 = Σ(Xi - u1)2 / n-1 and Sy2 = Σ(Yi - u2)2 / n-1. Both these estimators are the MVUE for o2.

It is important to note that the populations are normally distributed with variances 02 = 02. Overall, the given scenario involves the use of consistent estimators and the concept of MVUE (Minimum Variance Unbiased Estimator).

Based on your question, you're asking if the given estimator of σ² is a Minimum Variance Unbiased Estimator of σ².

Given that Xn and Yn are independent random samples from populations with means μx and μy and variances σx² and σy², respectively.

You have an estimator of the form: ô² = Sx² + Sy²
where Sx² = Σ (Xi - μx)² / (n - 1) and Sy² = Σ (Yi - μy)² / (n - 1).

The properties required for an MVUE are unbiasedness and minimum variance among all unbiased estimators.
Since both Sx² and Sy² are unbiased estimators of their respective variances (σx² and σy²), the sum ô² is also an unbiased estimator of σ² = σx² + σy².

To check if it has minimum variance, we need to consider the efficiency of the estimator. In this case, since the samples are independent and we have a linear combination of unbiased estimators, the estimator ô² is indeed an MVUE of σ².

To know more about Minimum Variance: brainly.com/question/4401748

#SPJ11

We would expect women with a waist measurement of 30.5 inches to have an average body fat percentage of 15.58% based on the correlation coefficient.

Using the equation y = 1.86 + 0.45x, where x is the waist measurement and y is the body fat percentage, and plugging in 30.5 inches for x, we get, based on correlation coefficient.

To evaluate the degree of relationships between data variables, correlation coefficients are utilised.

The most popular gauges the strength and direction of a linear link between two variables, known as a Pearson correlation coefficient.

Values usually fall between -1 and 1, with 1 denoting a perfectly positive correlation and -1 denoting a perfectly inverse relationship. Values at or near 0 suggest an extremely weak correlation or the absence of a linear relationship.

Depending on the application, different coefficient values are needed to convey a meaningful association. Assuming a normal population distribution, the correlation coefficient and sample size can be used to determine the statistical significance of a correlation.

y = 1.86 + 0.45(30.5)
y = 1.86 + 13.72
y = 15.58%

Therefore, we would expect women with a waist measurement of 30.5 inches to have an average body fat percentage of 15.58%.

Learn more about correlation coefficient here:

https://brainly.com/question/15577278

#SPJ11

Answer and Explanation:

The circumference of a circle is defined as:

[tex]C = 2\pi r[/tex]

If we use 3.14 for π, then the formula becomes:

[tex]C = 2(3.14)r[/tex]

[tex]C = 6.28r[/tex]

A regular polygon with 40 sides that is the same size as a circle will have a perimeter closer to the circumference of the circle than a polygon with 20 sides.

We can think of a circle as having infinite tiny sides, so the more sides a regular polygon has, the closer its circumference gets to a circle.

We can plug the given radius ([tex]r[/tex]) value into the above formula.

[tex]C = 6.28(9 \text{ cm})[/tex]

[tex]C \approx \boxed{56.6 \text{ cm}}[/tex]

It's the same process as for problem 2.

[tex]C = 6.28(9 \text{ in})[/tex]

[tex]C \approx \boxed{150.7 \text{ in}}[/tex]

This time, we can take the original formula:  [tex]C = 2(3.14)r[/tex]  and notice that [tex]2r = d[/tex], so we can substitute the given diameter ([tex]d[/tex]) value for [tex]2r[/tex] in that formula.

[tex]C = 3.14d[/tex]

[tex]C = 3.14(14.22 \text{ mm})[/tex]

[tex]C \approx \boxed{44.7 \text{ mm}}[/tex]

This problem is the same as problems 1 and 2, but it's in word problem format. We can keep plugging into the circumference formula.

[tex]C = 6.28(9 \text{ in})[/tex]

[tex]C \approx \boxed{56.5 \text{ in}}[/tex]

These are equivalent to problem 4, but in word problem format. Keep plugging into the formula [tex]C = 3.14d[/tex].

__________

The area of a circle is defined as:

[tex]A = \pi r^2[/tex]

But we can plug in 3.14 for π:

[tex]A = 3.14r^2[/tex]

__________

We can plug the given radius value into the above area formula.

[tex]A = 3.14(7 \text{ yd})[/tex]

[tex]A \approx \boxed{21.98 \text{ yd}}[/tex]

These are the same type of problem as 8, but since we are given the diameter ([tex]d[/tex]), we have to divide it by 2 to plug it in for the radius ([tex]r[/tex]).

[tex]r = \dfrac{d}{2}[/tex]

The lot size that will minimize inventory costs is 55 flat irons, and the number of orders per year would be 2.

To find the lot size and the number of orders per year that will minimize inventory costs, we need to consider the economic order quantity (EOQ) model.

The EOQ formula calculates the optimal order quantity that minimizes the total inventory costs.

EOQ = √((2× D× S) / H)

Where:

D = Annual demand (110 flat irons in this case)

S = Cost per order ($16.50 in this case)

H = Holding cost per unit per year ($1.20 in this case)

Let's calculate the EOQ and the number of orders per year:

Plug in the values in above formula:

EOQ = √((2×110 × 16.50) / 1.20)

EOQ = √(3630 / 1.20)

EOQ = 55

Now let us find the number of orders per year:

Number of orders = Annual demand / EOQ

Number of orders = 110 / 55

Number of orders = 2

Hence, the lot size that will minimize inventory costs is approximately 55 flat irons, and the number of orders per year would be 2.

To learn more on Economic order quantity click:

https://brainly.com/question/28347878

#SPJ12

In this particular data set, 10 is the only value that occurs more than once, so it is the only mode

The mode is the value that occurs most frequently in a data set. In the given data set {10, 30, 10, 36, 26, 22}, we can see that the value 10 occurs twice, and all other values occur only once. Therefore, the mode of the data set is 10, since it occurs more frequently than any other value in the set.

Note that a data set can have multiple modes if two or more values occur with the same highest frequency. However, in this particular data set, 10 is the only value that occurs more than once, so it is the only mode.

To learn more about frequently visit:

https://brainly.com/question/13959759

#SPJ11

Answer:

Step-by-step explanation:

The general indefinite integral of S(csc²t - 2[tex]e^t[/tex])dt is 1/sin(t) - 2[tex]e^t[/tex] + C

First, let's recall some basic rules of integration. The integral of a sum of functions is the sum of their integrals, and the integral of a constant times a function is the constant times the integral of the function. We also have some basic integration formulas, such as the integral of sin(t)dt = -cos(t) + C and the integral of [tex]e^t[/tex] dt = [tex]e^t[/tex] + C, where C is the constant of integration.

Now, let's consider the first term of the integrand, csc²t. This function can be rewritten using trigonometric identities as 1/sin²t. To integrate this function, we can use the substitution u = sin(t), du/dt = cos(t) dt, and rewrite the integral as ∫-1/u² du. Using the power rule of integration, we get ∫-1/u² du = 1/u + C = 1/sin(t) + C.

Next, let's consider the second term of the integrand, -2[tex]e^t[/tex]. This function is already in the form of the integral of [tex]e^t[/tex] dt, but with a constant factor of -2. Using the constant multiple rule of integration, we get -2 ∫[tex]e^t[/tex] dt = -2[tex]e^t[/tex] + C.

Putting these two results together using the sum rule of integration, we get the general indefinite integral of S(csc²t - 2e^t)dt:

∫S(csc²t - 2[tex]e^t[/tex])dt = ∫S(csc²t)dt - ∫2(S [tex]e^t[/tex])dt = 1/sin(t) - 2[tex]e^t[/tex] + C

where C is the constant of integration.

To know more about integral here

https://brainly.com/question/18125359

#SPJ4

The mean number of aggressive incidents for this group of four children was 6.

To calculate the mean number of aggressive incidents for this group of four 5-year-old children, follow these steps:

1. Add up the number of incidents for each child: 2 + 4 + 6 + 12
2. Divide the sum by the total number of children (4).

Now let's do the math:

Step 1: 2 + 4 + 6 + 12 = 24
Step 2: 24 ÷ 4 = 6

Therefore, the mean number of aggressive incidents for this group of four children was 6. Your answer is 6.

Learn more about Statistics: https://brainly.com/question/29093686

#SPJ11

(i) The limit of 2/n goes to zero as n goes to infinity.

(ii) The sequence bn converges to 1.

(i) To determine if the sequence an = 2 + (-1)^n/n converges or diverges, we can use the limit test. We need to find the limit of the sequence as n approaches infinity.

lim n→∞ an = lim n→∞ (2 + (-1)ⁿ/n)

Since (-1)ⁿ oscillates between 1 and -1 as n goes to infinity, we can split the sequence into two parts:

lim n→∞ (2 + (-1)ⁿ/n) = lim n→∞ 2/n + lim n→∞ (-1)^n/n

The limit of (-1)ⁿ/n oscillates between 1/n and -1/n as n goes to infinity, and hence it does not converge to a specific value. Therefore, the sequence an diverges.

(ii) Let's determine if the sequence bn = n² / √10+n² converges or diverges. Again, we can use the limit test to find out.

lim n→∞ bn = lim n→∞ n² / √10+n²

To simplify this expression, we can multiply the numerator and denominator by 1/n²:

lim n→∞ bn = lim n→∞ (n²/n²) / (√10/n²+1)

Now, as n goes to infinity, the denominator goes to 1, and the numerator goes to 1 as well. Therefore, the limit of the sequence bn is 1.

lim n→∞ bn = 1

To know more about limit here

https://brainly.com/question/8533149

#SPJ4

The mean of the probability distribution for the number of golf balls ordered by customers of a pro shop is 12.72.

The mean of a probability distribution is calculated using the formula:

Mean (µ) = Σ [x * P(x)]

Where "x" represents the number of golf balls and "P(x)" represents the probability of that specific number of golf balls being ordered.

Using the given probability distribution, we can calculate the mean as follows:

µ = (3 * 0.14) + (6 * 0.29) + (9 * 0.86) + (12 * 0.11) + (15 * 0.10)

µ = 0.42 + 1.74 + 7.74 + 1.32 + 1.50

µ = 12.72

So, the mean of the probability distribution for the number of golf balls ordered by customers of a pro shop is 12.72.

Learn more about Probability: https://brainly.com/question/30034780

#SPJ11

The value of k is 2 and the cumulative distribution function F(v) is given by F(v) = 1 - √(2/v).

To evaluate k, we need to use the fact that the total area under the density function must be equal to 1.

∫ f(y) dy = 1

Integrating the function over the given interval, we get:

∫ k/x^2 dy = ∫ kx^-2 dy from x=1 to x=2

= -kx^-1 from x=1 to x=2

= -k(1/2 - 1)

= k/2

So,

∫ f(y) dy = ∫ k/x^2 dy from x=1 to x=2 + ∫ 0 dy from y=2 to y=4

= k/2 + 0

= 1

Thus,

k/2 = 1

k = 2

So, the value of k is 2.

To find F(v), the cumulative distribution function, we need to integrate the density function over the interval (-∞,v]. Since the density function is zero for y less than or equal to zero, we have:

F(v) = ∫ f(y) dy from y = 0 to y = v

= ∫2/x^2 dy from x = √(2/v) to x = 2

= -2/x from x = √(2/v) to x = 2

= -2/2 + 2/√(2/v)

= 1 - √(2/v)

Thus, the cumulative distribution function F(v) is given by F(v) = 1 - √(2/v).

Learn more about cumulative here:
https://brainly.com/question/30087370

#SPJ11
The complete question is:
Consider the density function (10 points) f(y) ={k/x^2 < y < 4 0

d. Evaluate k.

e. Find F(v)

The appropriate frequency distribution graph for scores measured on a nominal scale is only a bar graph.

A bar graph is the representation of numerical data by rectangles (or bars) of equal width and varying height. The gap between one bar and another should be uniform throughout. It can be either horizontal or vertical. The height or length of each bar relates directly to its value.

To answer your question, the appropriate frequency distribution graph for scores measured on a nominal scale is only a bar graph.

A nominal scale is a scale that uses categories instead of numbers.

A bar graph is ideal for displaying the frequencies of these categorical variables, as it separates each category by using individual bars.

Histograms and polygons are more suitable for continuous or interval data, which do not apply to nominal scales.

Learn more about bar graph:

https://brainly.com/question/24741444

#SPJ11

Answer:

c mystify

Step-by-step explanation:

mystify means

utterly bewilder or perplex (someone).

"maladies that have mystified and alarmed researchers for over a decade"

The graph the represents the function is graph 3.

A graph is a visual representation of data that conveys information about the relationships between variables in mathematics and statistics. It consists of a set of points, lines, curves, and other geometric structures. Graphs are frequently used to demonstrate patterns and trends in the data as well as to provide numerical data in a more intelligible and accessible format.

There are many different kinds of graphs, including pie charts, histograms, scatter plots, bar graphs, and line graphs. Different sorts of data are represented by several types of graphs, each of which has its own special characteristics.

For the given function y=-(x+1)² - 3 we observe that the parabola has negative values.

Also the x intercept us at the point:

y = - (0 + 1)² - 3

y = -1 - 3 = -4

Now for x = -1 we have:

y = - (-1 + 1)² - 3

y = - 0 - 3 = -3

The graph that satisfies this condition is the third graph.

Hence, the graph the represents the function is graph 3.

Learn more about graph here:

https://brainly.com/question/17267403

#SPJ1

Hence, she will be able to  go to Disneyland in 9 months if she saves $25 per month.

Savings is the amount of money left over after spending and other obligations are deducted from earnings. Savings represent money that is otherwise idle and not being put at risk with investments or spent on consumption. Savings accounts are very safe but tend to offer very low rates of return as a result. Saving is the portion of income not spent on current expenditures. In other words, it is the money set aside for future use and not spent immediately.

Subtract  your  spending from your  income to figure how much you are saving, then divide this number by your income. 

Susie needs to save money in her piggy bank,

So, $250 - $45 = $205  more to reach  her goal.

If she saves  $25  per month, the number of months she needs to reach her goal can be found by dividing the amount she needs to save by the  amount she saves per month:

$205 ÷ $25 per month = 8.2 months ≅  9 months.

Since she can't save a fraction of a month, we can  round up to the nearest whole number, which means that Susie will need to save for 9 months to reach her goal.

Therefore, she will be able to  go to Disneyland in 9 months if she saves $25 per month.

Learn more about Money here:

https://brainly.com/question/26020106

#SPJ1.

Answer:

  $5420.35

Step-by-step explanation:

You want to find 6.2% of $87,425.

The wording "6.2% of $87,425" means ...

  0.062 × $87,425

That value is nicely computed using any calculator:

   0.062 × $87,425 = $5,420.35

The Social Security tax due is $5420.35.

__

Additional comments

The percent sign (%) effectively moves the decimal point 2 places. It is fully equivalent to /100.

  6.2% = 6.2/100

Written as a decimal, this is ...

  6.2/100 = 62/1000 = 0.062 . . . . . "sixty-two thousandths"

Generally, in a verbal description of a math expression, "of" means "times".

The units of dollars, represented by a dollar sign ($), can be treated as though $ were a variable. It remains a part of the product the way "x" would if this were 0.062·87425x = 5420.35x.

Solving the initial value problems, the function is f(x) = (x⁴ + x⁻⁴) / 4 + 17/16.

We have the initial value problem,

f'(x) = x³ - 1/x⁵

Let f(x) = y, then f'(x) = dy/dx.

dy/dx = x³ - 1/x⁵

dy = (x³ - 1/x⁵) dx

Integrating both sides,

∫dy = ∫(x³ - x⁻⁵) dx

y = [(x⁴/4) - (x⁻⁴/-4)] + C

y = (x⁴ + x⁻⁴) / 4 + C

We have y = 0 when x = √2/2 = 1/√2

((1/√2)⁴ + (1/√2)⁻⁴) / 4 + C = 0

Solving, C = 17/16

So the function is, f(x) = (x⁴ + x⁻⁴) / 4 + 17/16

Learn more about Initial Value Problems here :

https://brainly.com/question/30547172

#SPJ4

The decimal value of 1101 (base 2) is 13.

1. Identify the place values of each digit. In this case, from right to left, the place values are 2^0, 2^1, 2^2, and 2^3.

2. Multiply each digit by its corresponding place value.

1 * 2^3 = 1 * 8 = 8

1 * 2^2 = 1 * 4 = 4

0 * 2^1 = 0 * 2 = 0

1 * 2^0 = 1 * 1 = 1

3. Add the results of the previous step together: 8 + 4 + 0 + 1 = 13.

So, the decimal value is 13.

Learn more about Decimal:

https://brainly.com/question/28393353

#SPJ11

The composition function are solved by using half angle and identities  sin(arccos(x/3) is simplified √9-x²/3,

tan(arcsec( x/x+1)) = √-2x-1/x+1

cos(2arcsin(x)) = 1 - 2sin²(arcsin(x))

sinh(cosh⁻¹(x)): = √x² - 1.

cosh(2sinh⁻¹(x)) = (x² + 1).

1. sin(arccos(x/3) = √9-x²/3

Because sin(arccosx) =√1-x²

2. tan(arcsec( x/x+1))

we have  tan(arcsecx)=√x²-1

So tan(arcsec( x/x+1)) = √(x/x+1)²-1

tan(arcsec( x/x+1)) = √-2x-1/x+1

3. cos(2arcsin(x)):

Using the half-angle formula cos(2θ) = 1 - 2sin²(θ),

we can find that cos(2arcsin(x)) = 1 - 2sin²(arcsin(x))

cos(2arcsin(x))= 1 - 2x².

4. sinh(cosh⁻¹(x)):

Let t = cosh⁻¹(x),

so cosh(t) = x.

Using the identity cosh²(t) - sinh²(t) = 1,

we can solve for sinh(t) =√x² - 1).

Therefore, sinh(cosh⁻¹(x)): = √x² - 1.

5. cosh(2sinh⁻¹(x)):

Using the identity cosh²(t) - sinh²(t) = 1,

Therefore, cosh(2sinh⁻¹(x)) = (x² + 1).

To learn more on trigonometry click:

https://brainly.com/question/25122835

#SPJ4

(a) By solving we get, f(1) = cos(a), f'(x) = -a sin(atx), f'(1) = -a sin(a)

[tex]f''(x) = -a^2 cos(atx)[/tex], [tex]f''(1) = -a^2 cos(a)[/tex], [tex]f'''(x) = a^3 sin(atx)[/tex], [tex]f'''(1) = a^3 sin(a)[/tex][tex]f''''(x) = a^4 cos(atx)[/tex],  [tex]f''''(1) = a^4 cos(a)[/tex]

b. The Taylor series expansion of f(x) at x=1 is:

[tex]f(x) = cos(a) - a sin(a) (x-1) - (a^2/2) cos(a) (x-1)^2 + (a^3/6) sin(a) (x-1)^3 + (a^4/24) cos(a) (x-1)^4 - ....[/tex]

A Taylor series expansion is a mathematical tool used to represent a function as an infinite sum of its derivatives evaluated at a single point. The general formula for a Taylor series expansion of a function f(x) at the point x=a is given by:

f(x) = f(a) + f'(a)(x-a) + f''(a)(x-a)^2/2! + f'''(a)(x-a)^3/3! + ...

(a) We have:

f(x) = cos(atx)

So,

f(1) = cos(a)

f'(x) = -a sin(atx)

f'(1) = -a sin(a)

[tex]f''(x) = -a^2 cos(atx)[/tex]

[tex]f''(1) = -a^2 cos(a)[/tex]

[tex]f'''(x) = a^3 sin(atx)[/tex]

[tex]f'''(1) = a^3 sin(a)[/tex]

[tex]f''''(x) = a^4 cos(atx)[/tex]

[tex]f''''(1) = a^4 cos(a)[/tex]

(b)

To find the Taylor series expansion of f(x) at x=1, we need to find its derivatives at x=1:

f(x) = cos(atx)

f(1) = cos(a)

f'(x) = -a sin(atx)

f'(1) = -a sin(a)

[tex]f''(x) = -a^2 cos(atx)[/tex]

[tex]f''(1) = -a^2 cos(a)[/tex]

[tex]f'''(x) = a^3 sin(atx)[/tex]

[tex]f'''(1) = a^3 sin(a)[/tex]

[tex]f''''(x) = a^4 cos(atx)[/tex]

[tex]f''''(1) = a^4 cos(a)[/tex]

Then, the Taylor series expansion of f(x) at x=1 is:

[tex]f(x) = f(1) + f'(1)(x-1) + f''(1)(x-1)^2/2! + f'''(1)(x-1)^3/3! + f''''(1)(x-1)^4/4! + ...[/tex]

[tex]f(x) = cos(a) - a sin(a) (x-1) - (a^2/2) cos(a) (x-1)^2 + (a^3/6) sin(a) (x-1)^3 + (a^4/24) cos(a) (x-1)^4 - ...[/tex]

For similar question on expansion.

https://brainly.com/question/13602562

#SPJ11

The first and second derivatives of f(r) with respect to r. In this case, f'(r) = -22 and f"(r) = 0.

First, let's talk about what a derivative is. A derivative is a mathematical concept used to describe the rate at which a function changes. It tells us how quickly a function is changing at any given point. Now, let's move on to the given functions.

The first function is f(x) = e⁻ˣsin(2x). We're asked to prove that f"(x) + 2f'(x) + 2f(x) = 0.

To do this, we need to take the first and second derivatives of f(x). We'll start with the first derivative, or f'(x).

f'(x) = -e⁻ˣsin(2x) + 2e⁻ˣcos(2x)

Now, let's take the second derivative, or f"(x).

f"(x) = 2e⁻ˣsin(2x) - 4e⁻ˣcos(2x) - 2e⁻ˣcos(2x)

Now, we can plug these values back into the original equation:

f"(x) + 2f'(x) + 2f(x) = [2e⁻ˣsin(2x) - 4e⁻ˣcos(2x) - 2e⁻ˣcos(2x)] + 2[-e⁻ˣsin(2x) + 2e⁻ˣcos(2x)] + 2[e⁻ˣsin(2x)]

If we simplify this expression, we end up with:

f"(x) + 2f'(x) + 2f(x) = 0

Now, let's move on to the second function: f(x) = -22(1 + r). We're asked to find f'(x) and f"(x).

Well, there's a bit of a problem here. The function f(x) doesn't actually involve x at all - it only involves r. So it doesn't make sense to talk about its first or second derivative with respect to x.

To know more about derivative here

https://brainly.com/question/30074964

#SPJ4

In a continuous distribution of random variables, P(x>2) is treated the same as P(x>-2) because both represent areas under the probability density function, rather than specific values of the variable.

The main difference between discrete random variables and continuous random variables is that discrete random variables can only take on specific values, while continuous random variables can take on any value within a range.

This leads to differences in how probabilities are calculated for different values of the variable. In a discrete distribution, the probability of an event such as P(x>2) can be calculated directly by adding up the probabilities of all possible values of x that are greater than 2.

However, in a continuous distribution, the probability of an event such as P(x>2) must be calculated using integration, because the variable can take on an infinite number of values within the range.

Additionally, because continuous random variables can take on any value within a range, probabilities for specific values are typically very small and are often expressed as the probability density function.

Therefore, in a continuous distribution, P(x>2) is treated the same as P(x>-2) because both represent areas under the probability density function, rather than specific values of the variable.

To learn more about random variables here:

https://brainly.com/question/17238189#

#SPJ11

The 99% confidence interval for the population proportion is (0.671, 0.769), using a z-score distribution table.

To find the 99% confidence interval for the population proportion, we can use the following formula:

CI = p ± z x√(p'(1-p')/n)

where CI is the confidence interval, p is the population proportion, p' is the sample proportion, n is the sample size, and z is the z-score associated with the desired confidence level.

In this case, we have p' = 360/500 = 0.72 and n = 500. To find the z-score, we can use a standard normal distribution table or calculator. For a 99% confidence level, the z-score is approximately 2.576.

Substituting these values into the formula, we get:

CI = 0.72 ± 2.576 x √(0.72(1-0.72)/500)

= 0.72 ± 0.049

Therefore, the 99% confidence interval for the population proportion is (0.671, 0.769).

To know more about confidence interval, refer:

https://brainly.com/question/15905481

#SPJ4

The solution of general indefinite integral is (1/4)y⁴ + (0.6)y³ - (1.2)y² + C

To find the general indefinite integral of this expression, we first need to apply the power rule of integration.

The power rule states that the integral of xⁿ dx equals xⁿ⁺¹/(n+1) + C, where C is the constant of integration. In this case, we can apply the power rule to each term in the expression:

∫ y³ dy = y³⁺¹/(3+1) + C = (1/4)y⁴ + C

∫ 1.8y² dy = 1.8y²⁺¹/(2+1) + C = (0.6)y³ + C

∫ -2.4y dy = -2.4y¹⁺¹/(1+1) + C = (-1.2)y² + C

Notice that we add a constant of integration "C" to each term, as the derivative of a constant is always zero. Therefore, the most general antiderivative of the expression S(y³ + 1.8y² - 2.4y)dy is:

∫ (y³ + 1.8y² - 2.4y)dy = (1/4)y⁴ + (0.6)y³ - (1.2)y² + C

To know more about integral here

https://brainly.com/question/18125359

#SPJ4

The derivative of a function of a real variable measures the sensitivity to change of the function value with respect to a change in its argument.

1. y = sin(3√x)

dy/dx = (3/2√x)cos(3√x) (Chain rule)

Final answer: dy/dx = (3cos(3√x))/(2√x)

2. y = tan^-1(1√x)

dy/dx = 1/(1+(1/x))(1/2x^(-1/2))

Final answer: dy/dx = 1/(2x(1+x))

3. y = cos^3 x

dy/dx = -3cos^2(x)sin(x) (Chain rule and Power rule)

Final answer: dy/dx = -3cos^2(x)sin(x)

4. y = csc ^-1(e^x)

dy/dx = -(1/(|x|√(e^(2x)-1)))e^x (Chain rule and inverse trigonometric derivative)

Final answer: dy/dx = -(e^x)/(|x|√(e^(2x)-1))

5. y = e^sin^-1x = exp(sin^-1 x)

dy/dx = (1/√(1-x^2))e^sin^-1x (Chain rule and inverse trigonometric derivative)

Final answer: dy/dx = (e^sin^-1x)/(√(1-x^2))

6. y = sec^-1 (log x)

dy/dx = (1/|x|)(1/(√(log^2x-1))) (Chain rule and inverse trigonometric derivative)

Final answer: dy/dx = (1/|x|)(1/(√(log^2x-1)))

7. y = ln(cot x)

dy/dx = -csc(x) (Chain rule and derivative of cotangent)

Final answer: dy/dx = -csc(x)

8. y = exp(x^2 +1)

dy/dx = 2xe^(x^2+1) (Chain rule and Power rule)

Final answer: dy/dx = 2xe^(x^2+1)

9. y = ln(1 + e^x)

dy/dx = (1/(1+e^x))e^x (Chain rule)

Final answer: dy/dx = (e^x)/(1+e^x)

10. y = cot^-1(xe^x)

dy/dx = -(1/(1+(xe^x)^2)))e^x + (1/(1+(xe^x)^2)))xe^x (Chain rule and inverse trigonometric derivative)

Final answer: dy/dx = [xe^x - e^x]/(x^2e^(2x)+1)

learn derivative here,

https://brainly.com/question/23819325

#SPJ11

#ofSTDEVs is often called a "Z-score"; we can use the symbol z, which can be used to calculate the confidence intervals in a data.

A z-score in statistics is the number of standard deviations a data point deviates from the population mean. The difference between a data point and the mean, divided by the standard deviation, is used to generate the z-score.  

#ofSTDEVs=(value−mean)/standard deviation

It is frequently applied when determining confidence intervals and evaluating hypotheses. A data point's z-score, for instance, is 1 if it deviates from the mean by one standard deviation. Its z-score is 2 if it deviates from the mean by two standard deviations.

To know more about Z-score, refer:

https://brainly.com/question/15222372

#SPJ4

The buyers would need a sample size of 1069 items from the inventory in order to be 90% confident that their estimate of the percentage of outdated items has a margin of error of about 2%.

In order for the buyers to estimate the percentage of outdated items with a margin of error of 2%, they need to determine the proportion of outdated items in a random sample from the inventory. To be 90% confident in their estimate, they need to calculate the sample size required.
The formula for sample size is:
n = [tex](z^2 * p * q) / (e^2)[/tex]
Where:
n = sample size
z = z-score (from a standard normal distribution table for the desired confidence level of 90%, which is approximately 1.645)
p = proportion of outdated items (unknown)
q = proportion of non-outdated items (1 - p)
e = margin of error (0.02)
Since the proportion of outdated items is unknown, the buyers must use a conservative estimate for p. For example, they could assume that 50% of the items are outdated, which would give the largest possible sample size.
Plugging in the values:
n = [tex](1.645^2 * 0.5 * 0.5) / (0.02^2)[/tex]
n = 1068.73
Rounding up to the nearest whole number, the buyers would need a sample size of 1069 items from the inventory in order to be 90% confident that their estimate of the percentage of outdated items has a margin of error of about 2%.

To learn more about standard normal distribution, refer:-

https://brainly.com/question/29509087

#SPJ11

The first four non-zero terms of the Taylor series for the function 24 about 0 are 24 + 0x + 0x^2 + 0x^3.

To find the Taylor series for the function f(x) = 24 about 0, we need to calculate its derivatives up to the fourth order at x = 0.

f(x) = 24
f'(x) = 0
f''(x) = 0
f'''(x) = 0
f''''(x) = 0

Since all the derivatives are zero, the Taylor series for f(x) at x = 0 is:

f(x) = f(0) = 24

So, the first four non-zero terms of the Taylor series for the function 24 about 0 are:

24 + 0x + 0x^2 + 0x^3

Note that all the coefficients of the higher-order terms are zero, as all the derivatives of the function are zero.

Learn more about coefficients here:
https://brainly.com/question/30066987

#SPJ11