a playground merry-go-round has a mass of 120 kg and a radius of 1.80 m and it is rotating with a frequency of 0.500 rev/s. what is its angular velocity after a 22.0-kg child gets onto it by grabbing its outer edge? the child is initially at rest

No, the bulb would not light up. This is because a flashlight bulb needs a complete circuit to light up, which means that there needs to be a flow of electric current through the bulb.

In the given scenario, the tip of the bulb is touching only the top of the 3 V battery, which means that there is no complete circuit. In order for the bulb to light up, the bulb's base needs to be connected to the negative terminal of the battery, and the positive terminal of the battery needs to be connected to the switch.

When the switch is turned on, the circuit will be complete, and the current will flow from the positive terminal of the battery to the switch, then through the bulb, and back to the negative terminal of the battery, thereby lighting up the bulb.

In summary, the tip of a flashlight bulb touching the top of a 3 V battery would not light up the bulb because it does not create a complete circuit. The bulb's base needs to be connected to the negative terminal of the battery, and the positive terminal of the battery needs to be connected to the switch in order to complete the circuit and allow the bulb to light up.

For more such questions on Flashlight bulb.

https://brainly.com/question/29268884#

#SPJ11

Active force varies with changes in the muscle's resting length due to changes in the amount of overlap between myosin and actin filaments within the sarcomere.

When a muscle is at its optimal resting length, there is maximal overlap between myosin and actin filaments, allowing for the greatest number of myosin heads to bind with actin and generate force. If the muscle is stretched beyond its optimal resting length, the overlap between the filaments decreases, leading to a reduction in the number of myosin heads binding with actin and therefore a decrease in active force.

Similarly, if the muscle is shortened beyond its optimal resting length, the filaments overlap too much, causing some myosin heads to be unable to bind with actin and resulting in a decrease in active force.

In summary, the arrangement of myosin and actin within the sarcomere of skeletal muscle is crucial for generating active force, and changes in the resting length of the muscle can disrupt this arrangement, leading to variations in active force production.

You can learn more about Active force at

https://brainly.com/question/29310498

#SPJ11

The final velocity of the combined object is v/3.

In an inelastic collision, the two objects stick together and move as a single object after the collision. In this case, we have a mass m moving with velocity v colliding with a stationary object of mass 2m.

Conservation of momentum states that the total momentum of the system before the collision is equal to the total momentum after the collision. That is:

m * v + 0 = (m + 2m) * vf

Where vf is the final velocity of the combined object.

Simplifying this equation, we get:

m * v = 3m * vf

Dividing both sides by 3m, we get:

v/3 = vf

Therefore, the final velocity of the combined object is v/3.

To learn more about final velocity  visit: https://brainly.com/question/28608160

#SPJ11

Africa's lack of adequate infrastructure prevents it from producing as quickly as other nations, which makes it difficult for it to afford to create infrastructure.

Transportation, communication, sewage, water, and educational infrastructure are a few examples. Infrastructure projects are typically expensive and capital-intensive, yet they are essential to a region's growth and prosperity.

The most significant and prevalent component of network infrastructure is likely cabling. It aids in providing linkages and routes for information and communication transfer both inside and outside the company.

To know more about Infrastructure visit:

https://brainly.com/question/14527131

#SPJ1

Answer:the wave length becomes doubled or becomes two times the initial wavelength = 240 cm

Explanation:

From wave,

v = λf................ Equation 1

Where v = velocity of the wave, λ = wavelength of the wave, f = frequency of the wave.

Given: f = 1200 Hz, λ = 120 cm = 1.2 m

Substitute into equation 1

v = 1200(1.2)

v = 1440 m/s.

When the ship sent out a 600 Hz sound wave,

make λ the subject of formula in equation 1

λ = v/f............. Equation 2

Given: f = 600 Hz, v = 1440 m/s

Substitute into equation 2

λ = 1440/600

λ = 2.4 m or 240 cm.

When the ship sent out a 600 Hz sound wave instead, the wave length becomes doubled or becomes two times the initial wavelength = 240 cm

Out of the given statements about conductors under electrostatic conditions, option C is true. The electric potential inside a conductor is always zero. This is because in electrostatic conditions, charges on a conductor are in static equilibrium and there is no electric field inside the conductor.

Any excess charge on the conductor resides on its surface, and the electric field inside the conductor is zero. Due to this, the electric potential inside a conductor is constant and equal to zero.

Option A is false as positive work is not required to move a positive charge over the surface of a conductor. This is because the charge on a conductor is free to move, and the electric field inside a conductor is zero.

Option B is false as the charge that is placed on the surface of a conductor may not always spread evenly over the surface. This is because the shape and geometry of the conductor can affect the distribution of charges on its surface.

Option D is false as the electric field at the surface of a conductor is always perpendicular to the surface. This is because if the field were tangent to the surface, there would be a component of the field along the surface, which would cause charges to move along the surface, resulting in a non-static equilibrium.

Option E is false as the surface of a conductor is not always an equipotential surface. This is because the distribution of charges on a conductor's surface can be uneven, leading to variations in the electric potential on its surface.

Hence, Option C is correct.

For more such questions on Electrostatic conditions.

https://brainly.com/question/31566899#

#SPJ11

The radius of the largest particle still in suspension at that time is approximately 2.94 x 10^-5 m.

To compute the radius of the biggest particle remaining in suspension, we must first calculate the terminal velocity of a particle with that radius, which is the velocity at which the gravitational pull on the particle is balanced by the fluid's drag force.

The terminal velocity (Vt) of a spherical particle of radius (r) and density (ρp) in a fluid of density (ρf) and viscosity (μ) can be calculated using the following equation:

Vt = (2/9) * ((ρp - ρf)/μ) * g * r^2

where g denotes the acceleration due to gravity  (9.81 m/s^2).

First, we need to convert the density of the particle to kg/m^3:

Density of particle = 2.0 g/cm^3 = 2000 kg/m^3

Density of water = 1000 kg/m^3

The radius of the largest particle in suspension is the radius at which the terminal velocity is equal to the settling velocity of a particle, which is given by the following equation:

Vs = (2/9) x (ρp - ρf) x g x r^2 / μ

We can assume that the settling velocity is equal to the velocity at which the particle is just about to settle, i.e., it is very close to the terminal velocity.

Therefore, equating the two equations, we get:

Vt = Vs

(2/9) * ((ρp - ρf)/μ) * g * r^2 = (2/9) * (ρp - ρf) * g * r^2 / μ

Simplifying and solving for r, we get:

r = (μ^2 / ((ρp - ρf) * g * μ))^(1/3) * (ρp / ρf - 1)^(1/3)

Substituting the given values, we get:

r = (1.0 x 10^-3 N·s/m^2)^2 / ((2000 kg/m^3 - 1000 kg/m^3) * 9.81 m/s^2 * 1.0 x 10^-3 N·s/m^2))^(1/3) * (2000 kg/m^3 / 1000 kg/m^3 - 1)^(1/3)

r = 2.94 x 10^-5 m

Therefore, 2.94 x 10^-5 m is the radius of the largest particle still in suspension at that time.

For more such questions on radius, click on:

https://brainly.com/question/28844366

#SPJ11

The four ways to connect the three 1.50-kΩ resistors are:All in series ,Two in series,One in s.eries, All in parallel.

The four possible ways to connect three 1.50-kΩ resistors are:

Learn more about kΩ resistors

https://brainly.com/question/30897884

#SPJ4

According to the question each bulb has a resistance of 818 Ω.

Resistance is the opposition to the flow of electrical current in a circuit. It is measured in ohms, and it is the result of the collision of electrons with the atoms in the materials that make up the circuit. Resistance can be increased or decreased depending on the materials used in the circuit and the number of electrons that are moving through it. Resistance can be beneficial, as it helps to regulate the flow of electricity in a circuit, but it can also be detrimental, as it can cause a circuit to be inefficient or cause it to overheat.

The total resistance in a parallel circuit is equal to the reciprocal of the sum of the reciprocals of the individual resistances.
Rtotal = 1/ (1/R1 + 1/R2 + 1/R3 + ... + 1/Rn)
Since the total resistance of the circuit is 1.9 Ω, we can rearrange this equation to solve for the individual resistances.
1/R1 + 1/R2 + 1/R3 + ... + 1/Rn = 1/1.9
We also know that the total current flowing through the circuit is 270 mA. Since the bulbs are connected in parallel, the current flowing through each bulb is the same.
Therefore, each bulb has a resistance of:
R = V/I = 220V/270mA = 818 Ω.

To learn more about resistance
https://brainly.com/question/28135236
#SPJ1

The initial velocity of the prize wheel from the givens is calculated by using the equation of motion. The initial velocity of the wheel is 7.8 m/s.

From the equation of motion, the initial velocity, final velocity, distance, acceleration, and time was taken are calculated by choosing the appropriate equation. From the given, the final velocity (v) is 9 rad/s, distance(s) is 5 rad, and acceleration (a) is 2.0 rad/s^2.

The equation is

v² = u² + 2as

v²₋ 2as = u²

9² - 2(2)(5) =u²

u² = 61

u = √61

  = 7.8 m/s

Thus the initial velocity of the wheel is 7.8 m/s.

Learn more about acceleration :

https://brainly.com/question/12550364

#SPJ4

Answer:We can use Newton's second law of motion, which states that the force acting on an object is equal to its mass multiplied by its acceleration (F = ma).

To determine which object has the greatest applied force, we need to calculate the force acting on each object using the given mass and acceleration values.

For the soccer ball:

F = ma = (0.45 kg)(5 m/s²) = 2.25 N

For the tennis ball:

F = ma = (0.055 kg)(100 m/s²) = 5.5 N

For the marble:

F = ma = (0.015 kg)(1000 m/s²) = 15 N

For the ping pong ball:

F = ma = (0.020 kg)(10 m/s²) = 0.20 N

Therefore, the object with the greatest applied force is the marble, with a force of 15 N.

Explanation:

When four lamps are connected in parallel in a single circuit and one of the lamps burns out, the other lamps will continue to function normally.

This is because, in a parallel circuit, each lamp has its own independent path to the power source, and the failure of one lamp does not affect the operation of the others.

In a parallel circuit, the voltage across each branch is the same, and the total current flow is equal to the sum of the individual branch currents. When a lamp burns out in a parallel circuit, the resistance of that branch increases, which results in a decrease in the total current flow.

However, the current continues to flow through the other branches, and the lamps connected to those branches continue to operate normally.

In summary, when four lamps are connected in parallel in a single circuit, and one of the lamps burns out, the other lamps will continue to function normally.

This is because each lamp has its own independent path to the power source, and the failure of one lamp does not affect the operation of the others.

To learn more about parallel circuit, refer below:

https://brainly.com/question/11409042

#SPJ11

In modern Fourier Transform (FT) spectroscopic techniques, after the electromagnetic (EM) radiation passes through the sample, the data collected is in the form of an "interferogram" before it is mathematically processed and interpreted.

The interferogram is then transformed using a mathematical algorithm called the Fourier Transform, which converts the data into a more understandable and interpretable format, typically a spectrum of intensity versus frequency or wavelength.

The term "Fourier transform infrared" (FTIR) refers to the most popular kind of infrared spectroscopy. All infrared spectroscopies operate under the premise that some IR energy is absorbed when it passes through a material. It is noted which radiation enters the sample.

For more information on  electromagnetic (EM) radiation: https://brainly.com/question/22412143

#SPJ11

the colors in order from the shortest wavelength to the longest is Blue Green and Red. The correct answer is option D.

This is because colors can be arranged in order of increasing wavelength, which corresponds to decreasing frequency, as follows:

violet < blue < green < yellow < orange < red

This can also be understood through the concept of the electromagnetic spectrum, which is a range of electromagnetic radiation that includes visible light. Within the visible light spectrum, blue light has a shorter wavelength than green light, which has a shorter wavelength than red light. Therefore, blue light has a higher frequency and more energy than green or red light.

Therefore, in the given answer choices, the color order from shortest wavelength to longest wavelength would be blue, green, and red.

To learn about frequency click:

https://brainly.com/question/1292129

#SPJ4

The capacitance of a parallel-plate capacitor can be increased by increasing the area of the plates. The correct option is C.

The capacitance of a parallel-plate capacitor is given by the equation C = εA/d, where C is the capacitance, ε is the permittivity of free space, A is the area of the plates, and d is the distance between the plates. Therefore, the capacitance can be increased by increasing the area of the plates or decreasing the distance between the plates.

Option (A) is not true because increasing the distance between the plates decreases the capacitance.

Option (B) is not true because changing the charge on each plate has no effect on the capacitance. The capacitance of a capacitor only depends on the geometry of the plates and the dielectric material between them, not the amount of charge stored on the plates.

Option (D) is not true because increasing the potential difference across the plates does not change the capacitance. The potential difference across the plates is related to the charge on the plates and the capacitance through the equation V = Q/C, where V is the potential difference and Q is the charge on the plates. Therefore, changing the potential difference across the plates changes the charge on the plates, not the capacitance.

Option (E) is not true because, as stated above, the capacitance can be increased by increasing the area of the plates or decreasing the distance between the plates.

Therefore, the correct answer is (C) The area of the plates.

To learn about capacitance click:

brainly.com/question/28445252

#SPJ4

I₂ molecule has the highest boiling point among the halogens. So, the correct option is d.

As we go down the group, the size of the atom increases, and so, the intermolecular forces or the dispersion force becomes stronger.

Among the halogens, I₂ molecule has the highest size and thus stronger intermolecular forces. That means, the electrons in the molecule are away from the nucleus.

Therefore Iodine molecule will have the highest boiling point among the halogens.

To learn more about intermolecular forces, click:

https://brainly.com/question/29773695

#SPJ4

True. It is important to have someone with knowledge of the equipment, such as a TA (Teaching Assistant), check the setup before turning on the power to prevent potential damage to the equipment or inaccurate data due to a faulty setup.

The failure to have a Teaching Assistant (TA) check a setup before turning on the power can result in various issues such as equipment damage and inaccurate data. TAs are typically knowledgeable about the equipment and can help identify any potential issues with the setup, such as loose connections or incorrect settings. By not having a TA check the setup before powering it on, there is a risk of causing damage to the equipment due to incorrect use or malfunction.

Learn more about Teaching Assistant

https://brainly.com/question/28384283

#SPJ4

The moment of inertia of a uniform cylinder of radius r and mass m about an axis parallel and tangent to the cylinder can be calculated as I = (1/2)mr^2, where m is the mass of the cylinder and r is the radius. This moment of inertia represents the resistance of the cylinder to changes in its rotational motion.

When the cylinder rotates freely about this horizontal axis, it will experience a torque due to gravity acting on its center of mass. This torque will cause the cylinder to rotate at a constant angular velocity.

The tangent axis is chosen because it is perpendicular to the force of gravity acting on the cylinder, and therefore the torque due to gravity can be easily calculated. The torque due to gravity is given by the equation T = mgd, where m is the mass of the cylinder, g is the acceleration due to gravity, and d is the distance between the center of mass of the cylinder and the tangent axis.

The moment of inertia of the cylinder about the tangent axis determines how much rotational energy is stored in the cylinder as it rotates. This energy is proportional to the square of the angular velocity of the cylinder.

In summary, the moment of inertia of a uniform cylinder rotating freely about a horizontal axis parallel and tangent to the cylinder is determined by the mass and radius of the cylinder. The choice of the tangent axis is important because it allows for easy calculation of the torque due to gravity, which causes the cylinder to rotate at a constant angular velocity. The moment of inertia determines how much rotational energy is stored in the cylinder as it rotates.

Learn more about  moment of inertia here:

brainly.com/question/30051108

#SPJ11

Equal wavelength waves of amplitude 0.25 m and 0.15 m interfere with one another resulting in a minimum amplitude of 0 m. So, the correct answer is option d.

The principle of superposition of waves, which states that when two waves of the same frequency and amplitude interact with one another, their amplitudes are combined together, is the reason behind occurrence.

This indicates that the combined amplitude of the two waves will result in a wave whose amplitude is equal to the total of the two waves.

In the example provided, 0.25 m + 0.15 m = 0.40 m, which is more than the minimum amplitude. As a result, the lowest possible amplitude is 0 m.

Complete Question:

Equal wavelength waves of amplitude 0.25 m and 0.15 m interfere with one another. What is the resulting minimum amplitude that can result?

a. 0.15 m

b. 0.10 m

c. 0 m

d. -0.40 m

e. 0.40 m

To learn more about wavelength visit:

https://brainly.com/question/10750459

#SPJ4

Yes, there will be a difference in the time it takes for the thermometers to reach room temperature. The thermometer that was dried will reach room temperature faster than the one that was not dried. This is because the process of evaporation, which is similar to how perspiration works, cools the wet thermometer more quickly.

When you wave the thermometers around in the air, the remaining water on the wet thermometer will evaporate, taking heat away from the thermometer and causing it to cool down at a slower rate than the dried thermometer.

The dry thermometer will evaporate any moisture on its surface more quickly than the wet thermometer. This is similar to how perspiration works on our bodies - when we get out of the shower on a dry day, the water on our skin evaporates more quickly, cooling us down faster. Therefore, the dry thermometer will cool down faster than the wet thermometer and will reach room temperature before the wet one.

Learn more about thermometers here:

https://brainly.com/question/2339046

#SPJ11

Venus' surface temperature is about 480 degree C (896 degree Fahrenheit). This extreme temperature is much too hot to support life as we know it. The correct answer is A.

Additionally, Venus' atmosphere is composed mostly of carbon dioxide, which would make it difficult for humans to breathe. The planet also lacks a protective magnetic field, which means that its surface is bombarded with high levels of solar radiation. While there has been some speculation about the possibility of microbial life existing in Venus' atmosphere, no conclusive evidence has been found to support this theory. Hence the correct answer is option: A.

To know more about magnetic field, here

brainly.com/question/14848188

#SPJ4

The wave speed of the second wave is 100 m/s

The wave speed of a wave on a string is dependent on the properties of the string, such as its tension and mass per unit length. Since the tension of the string is fixed in this scenario, we can assume that the wave speed remains constant for both the 100 Hz and 200 Hz waves.
To find the wave speed, we can use the equation v = fλ, where v is the wave speed, f is the frequency, and λ is the wavelength. Since we know the frequency of the first wave is 100 Hz and its wave speed is 50.0 m/s, we can solve for its wavelength:
v = fλ
50.0 = 100λ
λ = 0.5 m
Now that we know the wavelength of the first wave, we can use the same equation to find the wave speed of the second wave:
v = fλ
v = 200(0.5)
v = 100 m/s
Therefore, the wave speed of the second wave is 100 m/s. This makes sense, as higher frequency waves tend to have shorter wavelengths and therefore faster wave speeds.

For more such questions on speed visit:

https://brainly.com/question/13943409

#SPJ11

momentum is mass times velocity, hence it depends on both mass and velocity. in order to stop an object with known mass and velocity, we can find applied force if we know the time taken by body to change the velocity from v to 0.

Momentum is defined as mass times velocity. it tells about the moment of the body. it is denoted by p and expressed in kg.m/s. mathematically it is written as p = mv. A body having zero velocity or zero mass has zero momentum. its dimensions is [M¹ L¹ T⁻¹]. Momentum is conserved throughout the motion.

According to conservation law of momentum initial momentum is equal to final momentum.

To know more about momentum

https://brainly.com/question/30487676

#SPJ4.

The tire swing performed a total of 8 oscillations since it made four round journeys between Jack and Jill.

A repeating, back-and-forth motion around an equilibrium point is referred to as an oscillation. The three parameters of an oscillation are its amplitude, frequency, and period. The oscillating object's greatest displacement is its amplitude.

The tire swing would complete one oscillation if it moved from Jack to Jill and returned to Jack. The tire swing would complete another oscillation if it moved from Jill to Jack and returned to Jill. Therefore, the tire swing completed two oscillations during each round trip between Jack and Jill.

The tire swing performed a total of 8 oscillations (4 round trips x 2 oscillations each round trip) since it made four round journeys between Jack and Jill (Jack to Jill and back, etc.).

To know more about oscillation, visit:

brainly.com/question/16976640

#SPJ1

We need to add 1.6 kg of ice, initially at 0°C, to bring the mixture of hot tea and ice to 10°C. The answer is b. 1.6 kg.

We can use the formula Q = m * Lf to solve this problem, where Q is the heat required to melt the ice, m is the mass of ice, and Lf is the latent heat of fusion for water (3.33 x 10^5 J/kg).
First, let's calculate the heat lost by the hot tea as it cools down from 80°C to 10°C. We can use the formula Q = m * cw * ΔT, where cw is the specific heat capacity of water (4 186 J/kg·°C), and ΔT is the change in temperature.
Q = 1.8 kg * 4 186 J/kg·°C * (80°C - 10°C)
Q = 532 728 J
This means that the hot tea will release 532 728 J of heat as it cools down.
To bring the mixture to 10°C, we need to add ice that will absorb this amount of heat. Let's call the mass of ice we need to add "m".
Q = m * Lf
532 728 J = m * 3.33 x 10^5 J/kg
m = 1.6 kg

Learn more about latent heat here:
https://brainly.com/question/30762921

#SPJ11

For point particle rotation, when the particle is initially moving, the angular momentum can be expressed as the product of the particle's moment of inertia and its angular velocity.

For point particle rotation, when the particle is initially moving, the angular momentum can be expressed as the product of the particle's moment of inertia, which is a measure of its resistance to rotation, and its angular velocity, which is the rate at which it is rotating around a fixed axis.

Mathematically, this can be written as L = Iω, where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.

The conservation of angular momentum is a fundamental principle in physics, which states that in the absence of external torques, the total angular momentum of a system remains constant.

For a point particle initially moving, the angular momentum can be expressed as:
Angular Momentum (L) = r × p
Where:
- L is the angular momentum of the point particle,
- r is the position vector of the particle relative to the rotation axis,
- p is the linear momentum of the particle (which can be expressed as p = mv, where m is the mass of the particle and v is its velocity),
- × denotes the cross product.

Learn more about rotation:

https://brainly.com/question/26249005

#SPJ11

The exact outcome of the collision will depend on the specific values of the masses and velocities of the carts, as well as the nature of the collision.

Assuming that the two carts are identical in every other aspect (e.g., friction, air resistance, etc.), the following would happen in each scenario:

Less massive cart is moving much faster than the more massive cart:

In this scenario, the less massive cart will exert a larger force on the more massive cart when they collide, due to its higher velocity. As a result, the more massive cart will experience a larger acceleration and move in the direction of the less massive cart. The less massive cart will also experience some deceleration due to the collision.

Less massive cart is moving much slower than the more massive cart:

In this scenario, the less massive cart will exert a smaller force on the more massive cart when they collide, due to its lower velocity. As a result, the more massive cart will experience a smaller acceleration and may not move much, while the less massive cart will experience a large deceleration due to the collision.

Less massive cart is moving at an intermediate speed compared to the more massive cart:

In this scenario, the two carts will experience an elastic collision if they are perfectly elastic or an inelastic collision if they are not. In an elastic collision, the carts will rebound from each other with the same relative speed they had before the collision. In an inelastic collision, the two carts will stick together and move off with a common velocity. The exact outcome of the collision will depend on the specific values of the masses and velocities of the carts, as well as the nature of the collision.

For more such questions on collision , Visit:

https://brainly.com/question/7221794

#SPJ11

If the P wave is missing on an ECG, but the QRS and T waves are normal, it could indicate that the electrical impulse that initiates the heart's contraction is not originating in the atria (the upper chambers of the heart).

The P wave represents the electrical activity of the atria, so its absence suggests that the impulse is not traveling through this part of the heart.

This could be due to various reasons, such as atrial fibrillation, AV nodal block, or an abnormal pathway of electrical conduction. It is important to consult with a healthcare professional for a proper diagnosis and treatment plan.

Therefore, if the P wave is absent but the QRS and T waves are normal on an ECG, it may be a sign that the electrical impulse that starts the heart's contraction did not originate in the atria (the upper chambers of the heart).

Learn more about "ECG": https://brainly.com/question/28238846

#SPJ11

Yes, there are several scenarios where the work done is considered negligible and the change in internal energy is equivalent to the amount of heat added. One such example is when a gas is compressed very slowly, so that there is no significant increase in temperature. In this case, the work done on the gas is very small and can be considered negligible, while the change in internal energy is equal to the amount of heat added.

Another example is when a container of liquid is stirred. If the stirring is done slowly and there is no friction between the liquid and the container, then the work done is negligible and the change in internal energy is equal to the amount of heat added. This is because the stirring process causes the molecules in the liquid to move around and collide with each other, which increases the internal energy of the liquid.

In the case of cooling down a cup of hot coffee, work is actually being done. This is because the coffee is losing heat to the surrounding environment, and in order for this to happen, work must be done to move the heat from the coffee to the environment. However, if the cooling process is done slowly and there is no significant change in pressure or volume, then the work done can be considered negligible and the change in internal energy can be equivalent to the amount of heat added.

To know more about work and internal energy - https://brainly.com/question/31429809

#SPJ11