A puppy and a kitten are 180 meters apart when they see each other. The puppy can run at a speed of 25 meters per second, while the kitten can run at a speed of 20 meters per second.
How soon will the kitten catch the puppy if the kitten starts running after the puppy?

Where the conditions of the semicircle is given, the correct pairs are given as follows;

∠BAE = 180°

∠CAD = 60°
∠DEC = 30°
∠CAE = 120°

1) ∠BAE = 180° is explained by the principle of angles on a straight line. Note that the angles on a straight line total 180°

2) Since AC and AD are both the radius of the circle, that and they divide the semi circle in three places, thus,

the arc created by the semicircle 180° is also divided by three.

Hence,

180/3 = 60°

3)  ∠CAD = ∠ADE

Hence,

∠DEC = ∠CAD/2

∠DEC = 60/2

∠DEC = 30°


4) Recall that the semicircle is divided into three equal parts. Since

∠CAE = Two of the arcs

∠CAE = 180 * 2/3

∠CAE = 120°

Learn more about semicircle  at:

https://brainly.com/question/30023569

#SPJ1

Answer:

Step-by-step explanation:

Where the conditions of the semicircle is given, the correct pairs are given as follows;

∠BAE = 180°

∠CAD = 60°

∠DEC = 30°

∠CAE = 120°

How are the above derived?

1) ∠BAE = 180° is explained by the principle of angles on a straight line. Note that the angles on a straight line total 180°

2) Since AC and AD are both the radius of the circle, that and they divide the semi circle in three places, thus,

the arc created by the semicircle 180° is also divided by three.

Hence,

180/3 = 60°

3)  ∠CAD = ∠ADE

Hence,

∠DEC = ∠CAD/2

∠DEC = 60/2

∠DEC = 30°

4) Recall that the semicircle is divided into three equal parts. Since

∠CAE = Two of the arcs

∠CAE = 180 * 2/3

∠CAE = 120°

Learn more about semicircle  at:

brainly.com/question/30023569

#SPJ1

The sample size needed to estimate the average weight of all second-grade boys is 35.

To determine the sample size needed to estimate the average weight of all second-grade boys with a 95% confidence level and within 1 pound margin of error, we can use the following formula:

[tex]$n = \frac{z^2 \sigma^2}{E^2}$[/tex]

n = sample size

z = z-score for the desired confidence level (1.96 for 95% confidence level)

[tex]$\sigma[/tex] = population standard deviation

E = margin of error

Substituting the given values, we get:

[tex]$n = \frac{(1.96)^2 \times (3)^2}{(1)^2}[/tex]

  `= 34.57

Rounding up to the nearest integer, we get a required sample size of 35.

Therefore, a sample size of 35 second-grade boys is needed to estimate the average weight of all second-grade boys with a 95% confidence level and within 1 pound margin of error, assuming we know that the standard deviation of such weights is 3 pounds.

To know more about sample size

https://brainly.com/question/30885988

#SPJ4

To calculate the expected return, risk premium, standard deviation, and ratio of risk premium to standard deviation for a complete portfolio with y=0.6, we need to use the following formulas:

Expected return = y * rp + (1-y) * rf

Risk premium = rp - rf

Standard deviation = y * σp

Ratio of risk premium to standard deviation = (rp - rf) / σp

where rp is the expected return of the risky asset, rf is the risk-free rate, σp is the standard deviation of the risky asset, and y is the proportion of the portfolio invested in the risky asset.

Given that y=0.6, rp=6%, rf=2%, and σp=20.5%, we can calculate:

Expected return = 0.6 * 6% + 0.4 * 2% = 3.6% + 0.8% = 4.4%

Risk premium = 6% - 2% = 4%

Standard deviation = 0.6 * 20.5% = 12.3%

Ratio of risk premium to standard deviation = (6% - 2%) / 20.5% = 0.1951

Therefore, the expected return is 4.4%, the risk premium is 4%, the standard deviation is 12.3%, and the ratio of risk premium to standard deviation is 0.1951.

Learn more about standard deviation here:

https://brainly.com/question/23907081

#SPJ11

To compute the mass of the rod, you'll need to integrate the density function P(x) = 3x^2 + 1 oz./inch over the length of the pipe (from 0 to 10 inches). The mass can be found by calculating the integral:
Mass = ∫[P(x) dx] from 0 to 10

Substitute the density function:
Mass = ∫[(3x^2 + 1) dx] from 0 to 10
Now, find the antiderivative of the function:
Antiderivative = x^3 + x + C
Now, evaluate the antiderivative at the limits 0 and 10:
Mass = (10^3 + 10) - (0^3 + 0)
Mass = (1000 + 10) - 0
Mass = 1010 oz.
So, the mass of the 10-inch-long pipe is 1010 ounces.

Learn more about density function here:

https://brainly.com/question/31039386

#SPJ11

Using probability, we can find that Probability of purple will be 4 times likely to probability of red.

Hence, option C is correct.

The ability to occur is known as probability. The occurrence of random events is the subject of this branch of mathematics. The value is expressed as a number between 0 and 1. Probability has been introduced in mathematics to predict how likely events are to occur.

Here in the question,

Number of red pencils = 2

Number of purple pencils = 8

Number of blue pencils = 4

Number of green pencils = 5

Total number of pencils:

= 2 + 8 + 4 + 5

= 19

Now,

A) The statement is not true as blue is not the color that has the minimum number of pencils. Red color has the minimum number of pencils.

B) The statement is not true as there are 4 blue pencils and 5 green pencils, so probability for them will not be equal.

C) Here in this statement, purple pencils are 4 times than that of red pencils.

Red pencils = 2

Purple pencils = 8.

Probability of purple will be 4 times likely to probability of red.

So, the probability for this statement will be true.

D) The statement is not true as:

Purple pencils = 8

All others combined = 2 + 4 + 5 = 11.

So, the probability of purple will not be more than that of the rest combined.

To know more about probability, visit:

https://brainly.com/question/16484393

#SPJ1

The complete question is:

The table shows the numbers of different colors of pencils in a pencil case. A student will randomly select one pencil from the pencil case. Based on the information in the table, which statement is true?

A) The pencil is least likely to be blue.

B) The pencil is equally likely to be blue or green.

C) The pencil is 4 times as likely to be purple as it is to be red.

D) The pencil is more likely to be purple than all other colors combined.

Number of Pencils

Red Pencils = 2

Purple Pencils=8

Blue pencils=4

Green pencils=5​

Answer:

the correct answer is B as graph Is a decreasing function

Since this probability is very low, we can reject the null hypothesis in favor of the alternative hypothesis, and conclude that the new drug is more effective than aspirin.

a) The alternative hypothesis is more naturally two-sided because the pharmaceutical company wants to determine if the new drug is either more or less effective than aspirin. It is not clear from the question whether the new drug is expected to be more effective than aspirin, or if it could be less effective. Therefore, a two-sided alternative hypothesis is more appropriate.

b) If the P-value is 0.29, then there is not enough evidence to conclude that the new drug is more effective than aspirin because the P-value is greater than the typical significance level of 0.05. A P-value of 0.29 means that there is a 29% chance of observing a difference between the new drug and aspirin as large as the one observed in the study, assuming that the null hypothesis (that the new drug is equally effective as aspirin) is true. Since this probability is relatively high, we cannot reject the null hypothesis in favor of the alternative hypothesis.

c) If the P-value is 0.0029, then there is strong evidence to conclude that the new drug is more effective than aspirin because the P-value is less than the typical significance level of 0.05. A P-value of 0.0029 means that there is only a 0.29% chance of observing a difference between the new drug and aspirin as large as the one observed in the study, assuming that the null hypothesis is true. Since this probability is very low, we can reject the null hypothesis in favor of the alternative hypothesis, and conclude that the new drug is more effective than aspirin.

To learn more about hypothesis visit:

https://brainly.com/question/29519577

#SPJ11

The value of solution of the equation is,

⇒ C₁ cos (2x) + C₂ sin (2x) - 1/4 x cos (2x)

Given that;

The 2nd order non-homogeneous linear differential equation,

⇒ y" + 4y = sin (2x)

And, the general solution y (c) = C₁ cos(2x) + C₂ sin(2x) to the associated homogeneous equation.

Now, We have;

The 2nd order non-homogeneous linear differential equation,

⇒ y" + 4y = sin (2x)

Hence, Its auxiliary equation is,

⇒ m² + 4 = 0

⇒ m = ± 2i

Since, the general solution y (c) = C₁ cos(2x) + C₂ sin(2x) to the associated homogeneous equation.

And, Let particular solution is,

⇒ y (p) = A cos 2x + B sin (2x)

Now, After solving we get;

⇒ A = 0

⇒ B = - 1/4

Thus, The value of solution of the equation is,

⇒ y (c) + y (p)

⇒ C₁ cos (2x) + C₂ sin (2x) - 1/4 x cos (2x)

Learn more about the mathematical expression visit:

brainly.com/question/1859113

#SPJ4

Answer:

Step-by-step explanation:

If the two triangles are similar then you need to set up a proportion.  

Segment ED is similar to GD

and DF is similar to DC

So.

48/(5x-2)=40/(2x+7)    

Cross multiply

48(2x+7)=40(5x-2) (if you see it you can reduce numbers so its not so big but i won't to keep things simple)

96x+336= 200x-80

416=104x

x=4

Having a positive second derivative is beneficial because it indicates that the rate of change is increasing.

As input variable like interest rate, underlying stock price changes, rate of change in output variable like bond price, option price increases.

This can provide certain benefits, as discussed below.

Positive Convexity in Bonds,

Bond prices are inversely related to interest rates.

As interest rates increase, bond prices decrease and vice versa.

When a bond has positive convexity, its price will increase at an increasing rate.

As interest rates decline, and decrease at a decreasing rate as interest rates increase.

This is beneficial to bondholders.

Because it means that when interest rates decline, the bond's price will increase by more than it would if the bond had no convexity.

This can result in higher total returns for bondholders.

Long Gamma in Options,

Gamma is a measure of rate of change of delta the sensitivity of an option's price to changes in underlying asset price.

When an option trader is long gamma, it means they hold options that have positive gamma.

This is beneficial because it means that as the underlying asset price changes.

The option delta and therefore its price will change at an increasing rate.

Result in higher profits for the option trader especially if underlying asset experiences large price movements.

Learn more about derivative here

brainly.com/question/30117453

#SPJ4

The x-intercepts of f(x) are (-2, 0), (0, -32), and (-4, 0).

First, let us check if (0, -1) is one of the intercept. If (0, -1) is an x-intercept of f(x), that means f(0) = 0.

So let's evaluate f(0):

f(0) = 0³ - 3(0)² - 36(0) - 32 = -32

Since f(0) is not equal to 0, we know that (0, -1) is not an x-intercept of f(x).

To find the actual x-intercepts of f(x), we need to factor the polynomial. We can start by using synthetic division to test if x = 1 is a factor of f(x).

For us to get to our answer, we test with the possible factors of 32 which are: ±1, ±2, ±4, ±8, ±16, ±32.

Learn more about intercept here:

https://brainly.com/question/25722412

#SPJ1

Answer:

48.33335

Step-by-step explanation:

2/3 of an inch is 0.66667 inches and  5 shoes so 0.66667 x 5 = 3.33335 + 45 since 9 x 5 equals 45 which is 48.33335

The correct expression to find the volume of a rectangular prism is D. (3 × 6) × 15 = 270 in.3.

Expression is a word, phrase, or gesture that conveys an idea, thought, or feeling. It is an outward representation of an emotion, attitude, or opinion. Expressions can be verbal, physical, or written. They can also take the form of art, music, or dance. Expression is used to communicate and express emotions, thoughts, and ideas. It can be a powerful tool to create a connection with others and build relationships.

The correct expression to find the volume of a rectangular prism is D. (3 × 6) × 15 = 270 in.3. This expression involves multiplying the length, width, and height of the rectangular prism in order to calculate the total volume. In this case, the length is 3, the width is 6, and the height is 15. If these values are multiplied together, the result is 270 in.3, which is the total volume of the rectangular prism.

To know more about expression click-
http://brainly.com/question/1859113
#SPJ1

Answer:

Step-by-step explanation:

Your setup was not quite right.  The formula is

: (the outer part of the circle minus innner)1/2 = angle

(146 - (6x+6))1/2 = x+10            Be careful to distrubut the negative

(146-6x-6)1/2 = x+10

(140-6x)1/2=x+10

70-3x=x+10

60=4x

x=15

<ECB = x+10 = 15+10=  25

Answer:

  25°

Step-by-step explanation:

You want the measure of exterior angle ECB marked as (x+10°) given that it intercepts arcs marked as 146° and (6x+6°).

The measure of the exterior angle is half the difference of the intercepted arcs.

  x +10° = 1/2(146° -(6x +6°))

  x +10° = 70° -3x . . . . . . . . . . . simplify

  4x = 60° . . . . . . . . . . . add 3x-10°

  x = 15° . . . . . . . . . divide by 4

The measure of the external angle is ...

  ∠ECB = x +10° = 15° +10°

  ∠ECB = 25°

__

Additional comment

Often, you don't need to do any math. You only need to do a "reasonableness check" on the offered answer choices.

You know that any inscribed angle in the circle that intercepts arc BD (146°) will have a measure of 146°/2 = 73°. The vertex of an external angle is necessarily farther away from arc BD than any inscribed angle. This means the external angle will have a smaller measure than 73°. That matches only one answer choice.

The inscribed angles we're concerned with here would have their vertex on long arc BED.

The data, and use this information to make informed decisions and draw conclusions.

A table is a structured representation of data that organizes information into rows and columns. Tables can be used to summarize numerical and categorical data, and can include measures of central tendency (e.g., mean, median, mode) and measures of variability (e.g., range, standard deviation). To analyze data from a table, you can identify patterns or trends in the data, calculate summary statistics, and compare the values of different variables.

A histogram is a graph that displays the distribution of numerical data by dividing the data into intervals (called "bins") and showing the frequency or relative frequency of data points that fall within each bin. Histograms can be used to identify the shape of a distribution, the center of the data (i.e., the mean or median), and the spread of the data (i.e., the standard deviation or range). To analyze data from a histogram, you can identify the shape of the distribution (e.g., normal, skewed, bimodal), calculate summary statistics (e.g., mean, median, standard deviation), and compare the values of different variables.

In summary, tables and histograms are powerful tools for organizing, summarizing, and visualizing data. By analyzing and interpreting data from tables and histograms, we can gain insights into the patterns and trends of the data, and use this information to make informed decisions and draw conclusions.

Complete question: Use the following information to answer questions. Data below the recording the number of deaths for the top thirteen worst U. S. tornados since 1925. A histogram showing the distribution is also included. 689, 454, 102, 208, 142, 271, 315, 268, 150, 181, 114, 115, 110 Frequency 4 3 2 1 200 1 300 1 500 1 100 400 600 700 Number of Deaths (a) Choose the most appropriate measure of center then calculate the value rounded to the nearest tenth.

To learn more about conclusions visit:

https://brainly.com/question/78686

#SPJ11

A graph that represents the given points is shown in the images below.

In Mathematics and Geometry, an ordered pair is a pair of two elements or data points that are commonly written in a fixed order within parentheses as (x, y), which represents the x-coordinate (abscissa) and the y-coordinate (ordinate) on the coordinate plane of any graph.

Based on the cartesian coordinate (grid) below, the coordinates points and quadrants should be identified as follows;

Point (4, -4) → quadrant 4.

Point (-3, -4) → quadrant 3.

Point (-3, 4) → quadrant 2.

Point (4, 4) → quadrant 1.

Point (5, -4) → quadrant 4.

Point (-4, -4) → quadrant 3.

Point (5, 4) → quadrant 1.

Point (-4, 4) → quadrant 2.

In this exercise, we would use an online graphing calculator to plot the given points as shown in the images attached below.

Read more on ordered pair here: brainly.com/question/25462418

#SPJ1

The probability of it being sunny tomorrow (Xn+1=1) is 0.7, while the probability of it being rainy tomorrow (Xn+1=2) is 0.3

Based on the information provided, the weather at a holiday resort is modeled as a time-homogeneous stochastic process (Xn: n > 0), where Xn represents the state of the weather on day n, and can take on the value 1 for sunny weather and 2 for rainy weather.

Furthermore, for each day n greater than 1, the state of the weather on day n+1 (Xn+1) is conditionally independent of the history of the process prior to day n-2 (Hn-2 = {X0, X1, ..., Xn-2}), given the two most recent states of the process (Xn and Xn-1). The conditional distribution of Xn+1 given the two most recent states is as follows:

- If it was sunny both yesterday and today, then it will be sunny tomorrow with a probability 0.9.
- If it was rainy yesterday but sunny today, then it will be sunny tomorrow with a probability 0.8.
- If it was sunny yesterday but rainy today, then it will be sunny tomorrow with a probability 0.7.
- If it was rainy both yesterday and today, then it will be sunny tomorrow with a probability 0.6.

This information can be used to simulate the weather at the holiday resort over time, based on the current and past states of the process. For example, if the weather was sunny yesterday (Xn-1=1) and rainy today (Xn=2), then the probability of it being sunny tomorrow (Xn+1=1) is 0.7, while the probability of it being rainy tomorrow (Xn+1=2) is 0.3.r

learn more about probability

https://brainly.com/question/30034780

#SPJ11

The statement ' if this model suffers from heteroskedasticity, then the usual OLS t statistics no longer have a t distribution and the f statistics no longer have an f distribution' is true because a model suffering from heteroskedasticity will not be accurate.

If a model suffers from heteroskedasticity, which is the condition where the variance of the errors is not constant across observations, then the usual OLS t statistics and F statistics no longer have t or F distributions, respectively. In other words, the standard errors of the coefficients and the overall fit of the model cannot be accurately estimated using the usual assumptions of OLS regression.

Specifically, when heteroskedasticity exists, the OLS estimator remains unbiased, consistent, and asymptotically normal, but its estimated standard errors are biased and inconsistent, leading to invalid inference. This means that t-tests for individual coefficients and F-tests for overall model significance based on these standard errors may be unreliable.

Instead, alternative methods such as robust standard errors or weighted least squares should be used to correct for heteroskedasticity.

To learn more about heteroskedasticity, click here:

https://brainly.com/question/18403256

#SPJ11

Thus, the arc length MH for the given concentric circles is found to be 10.8π.

The curved portion that runs along the circle's perimeter and joins the ends of a two radii that make up a sector is known as the sector arc. Two radii that meet at the centre to form a sector define a circle. The sector is the portion of the circle created by these two radii.

Given that-

RB = MR = 27 cm (radius of the inner circle)

Since MRB is the straight line:

m∠MRH + m∠HRB = 180 (linear pair)

m∠MRH + 72 = 180

m∠MRH  = 180 - 72

m∠MRH  = 108 (say Ф)

Using the formula for the length of the sector

length of arc MH = Ф/360 * (2πr)

Put the values:

length of arc MH = 72/360 * (2π*27)

length of arc MH = 0.2 * (54π)

length of arc MH = 10.8π

Thus, the arc length MH for the given concentric circles is found to be 10.8π.

Know more about the sector of the circle:

https://brainly.com/question/22972014

#SPJ1

Complete question:

two circle are shown where RB = 27 cm, HT = 25.5 cm and m∠HRB = 72°.

Determine the length of arc MH in term of π.

The equation of the tangent line to the curve xy² + xy = 6 at the point (3, 1) is y = (7/4)x - 19/4.

To find the equation of the tangent line to the curve xy² + xy = 6 at the point (3, 1), we first need to find the slope of the tangent line. We can use implicit differentiation to find the derivative of the curve:

(xy² + xy)' = (6)'

Using the product rule for differentiation, we get

y² + 2xydx/dy + xdx/dy + y = 0

Rearranging and solving for dx/dy, we get

dx/dy = (-y - 2xy)/(x + y²)

Substituting the values x = 3 and y = 1, we get

dx/dy = (-1 - 2(3)(1))/(3 + 1) = -7/4

Therefore, the slope of the tangent line at the point (3, 1) is -7/4.

Now we can use the point-slope form of a line to find the equation of the tangent line

y - y₁ = m(x - x₁), where (x₁, y₁) = (3, 1) and m = -7/4

Simplifying, we get:

y - 1 = (-7/4)(x - 3)

Multiplying both sides by 4 to eliminate the fraction, we get:

4y - 4 = -7(x - 3)

Simplifying further, we get

4y - 7x = -19

Therefore, the equation of the tangent line is y = (7/4)x - 19/4

Learn more about point-slope form here

brainly.com/question/29054476

#SPJ4

To find the unit length of a tangent vector, you can follow these steps:

For example, suppose you have a curve given by the parametric equations x = t^2 and y = t^3, and you want to find the unit length of the tangent vector at the point (1,1).

The tangent vector at this point is given by the derivative of the parametric equations with respect to t, which is (2t, 3t^2).

To find the magnitude of this vector, we can calculate sqrt((2t)^2 + (3t^2)^2), which simplifies to sqrt(13t^2).

At t=1, the magnitude of the tangent vector is sqrt(13).

To find the unit length of the tangent vector, we can divide each component of the vector by its magnitude, which gives (2/sqrt(13), 3/sqrt(13)).

Therefore, the unit length of the tangent vector at the point (1,1) is (2/sqrt(13), 3/sqrt(13)).

For more information about tangent vector, visit:

https://brainly.com/question/15303761

#SPJ11

Answer:

Let W be the width of the logo. The area of the rectangular logo is given by:

A = L × W

From the problem, we know that the length of the logo is 1.9 meters, so:

L = 1.9 m / W

We also know that the area of the logo is exactly the maximum area allowed by the building owner, so we can write:

A = max area = 25 m^2

Substituting the expression for L in terms of W, we get:

A = L × W

25 m^2 = (1.9 m / W) × W

Simplifying and solving for W, we get:

25 m^2 = 1.9 m × W

W = 25 m^2 / 1.9 m

W ≈ 13.16 m

Finally, we can use the expression for L in terms of W to find the length of the logo:

L = 1.9 m / W

L ≈ 0.144 m

Therefore, the equation that could be used to determine L, the unknown side length of the logo, is:

L = 1.9 m / W, where W is the width of the logo.

Step-by-step explanation:

The statement 'a histogram depicting the age distribution for 30 randomly selected students is an example of descriptive statistics' is true as this type of statistics aims to summarize and display data effectively through graphs, charts, or tables.

A histogram depicting the age distribution for 30 randomly selected students is an example of descriptive statistics, which involves collecting, organizing, summarizing, and presenting data in a way that is easily interpretable.

A histogram is a graph that displays the frequency or relative frequency of a set of continuous data by dividing the range of the data into intervals and displaying bars that represent the number or proportion of observations that fall into each interval.

Descriptive statistics are used to describe the main features of the data, such as the central tendency, variability, shape, and outliers, and to make comparisons or inferences about the population from which the sample was drawn.

To learn more about histogram, click here:

https://brainly.com/question/30354484

#SPJ11

The equation of motion for the given system is:

[tex]x(t) = -1.07e^{(-2.5t)} + 0.57e^{(-t)}[/tex]

To determine the equation of motion for the given system, we can start by applying Newton's second law of motion, which states that the sum of the forces acting on an object is equal to the mass of the object times its acceleration.

Let x(t) be the displacement of the mass from its equilibrium position at time t. Then the equation of motion for the system is given by:

mx''(t) + cx'(t) + k × x(t) = 0

where m is the mass, k is the spring constant, and c is the damping coefficient.

Substituting the given values, we have:

2x''(t) + 7x'(t) + 5 × x(t) = 0

To solve this second-order linear homogeneous differential equation, we can assume a solution of the form x(t) = e^(rt), where r is a constant to be determined.

Substituting this into the equation of motion, we get:

[tex]2r^{2e}^{(rt)} + 7re^{(rt)} + 5\times e^{(rt)} = 0[/tex]

Dividing both sides by e^(rt), we get:

[tex]2r^2 + 7r + 5 = 0[/tex]

Solving for r using the quadratic formula, we get:

[tex]r = (-7 + \sqrt{(7^2 - 425)} ) / (2\times 2) = -2.5, -1[/tex]

So the general solution to the equation of motion is:

[tex]x(t) = c1e^{(-2.5t)} + c2e^{(-t)}[/tex]

where c1 and c2 are constants to be determined from the initial conditions.

Using the initial conditions given, we have:

x(0) = -0.5 m (the mass is released from a point 1/2 meter below the equilibrium position)

x'(0) = 3 m/s (the mass has an upward velocity of 3 m/s)

Differentiating the general solution with respect to time, we get:

[tex]x'(t) = -2.5 c_1 e^{(-2.5t)} - c_2\times e^{(-t)}[/tex]

Substituting t = 0 and the initial condition for x'(0), we get:

-2.5 × c1 - c2 = 3

Substituting t = 0 and the initial condition for x(0), we get:

c1 + c2 = -0.5

Solving these two equations simultaneously, we get:

c1 = -1.07 m

c2 = 0.57 m

So the particular solution to the equation of motion with the given initial conditions is:

[tex]x(t) = -1.07e^{(-2.5t)} + 0.57e^ P{(-t)}[/tex]

for such more question on equilibrium

https://brainly.com/question/12270624

#SPJ11

Abby did not make a square corner because the rectangle is about 0.888 feet longer on one diagonal than the other diagonal

To determine whether Abby made a square corner, lets use the Pythagorean theorem, which states that for a right triangle with legs of length a and b and hypotenuse of length c, we have:

c^2 = a^2 + b^2

Lets use the theorem to check if the diagonal (c) is the hypotenuse of a right triangle with sides of length 4 feet and 5 feet.

Lets convert the length of the diagonal from inches to feet:

76 inches = 76/12 feet = 6.333... feet (rounded to the nearest thousandth)

Now, we can use the Pythagorean theorem to check if the sides of the rectangle form a right triangle:

c^2 = a^2 + b^2

(6.333... feet)^2 = (4 feet)^2 + (5 feet)^2

40.111... feet^2 = 16 feet^2 + 25 feet^2

40.111... feet^2 = 41 feet^2 (rounded to the nearest thousandth)

Since the equation is not true, Abby did not make a square corner.

This means that the rectangle is about 0.888 feet longer on one diagonal than the other diagonal

Learn more about Pythagorean theorem at https://brainly.com/question/343682

#SPJ1

Answer:

63.22⁰

Step-by-step explanation:

the answer is in the picture. please mark mine brainliest.

The equation b(A) x P(A) represents the expected value or potential benefit of the investment. It takes into account both the possible benefit of the investment (b(A)) and the probability of the investment being successful (P(A)).

Essentially, it means that if an investment is made, there is a probability (P(A)) that it will be successful and yield a certain benefit (b(A)). By multiplying these two factors together, we can estimate the expected value or potential return on the investment, In this context, "an investment is made" is represented by event A. The possible benefit of the investment is denoted by b(A), and the probability that the investment is successful is represented by P(A).

The equation b(A) x P(A) represents the expected benefit of the investment, considering the probability of its success. By multiplying the possible benefit (b(A)) by the probability of success (P(A)), you are calculating the average benefit you can expect from the investment, taking into account its likelihood of success.

To put it simply, the equation b(A) x P(A) helps you evaluate the potential return of an investment, considering both its possible benefits and its chances of being successful.

To know more about an investment:- https://brainly.com/question/15353704

spj11

Answer:

25 + (5 x 15) = 125

Step-by-step explanation:

For a survey of community related to build a police substation in their nearby, from binomial distribution the probability that the number favoring the substation is more than 12 is 0.398.

We have a survey related to community view regarding building a police substation in their nearby. Let X be an event for favouring the building a police substation in their nearby. The

Probability of community favored building a police substation in their neighborhood = 80% = 0.80

Total number of selected citizens = 15

We have to determine the probability that the number favoring the substation is more than 12. Using Binomial probability distribution, P( X = x) = ⁿCₓ pˣ( 1- p)⁽ⁿ⁻ˣ⁾

where, p --> probability of success

x -> number of success

n -> total number of trials

here, n = 15, p = 0.80, x = 12, substitute all known values in above formula, P( X >12) = P( X= 13) + P( X = 14) + P(X = 15)

= ¹⁵C₁₃ 0.8¹³(0.2)² + ¹⁵C₁₄ 0.8¹⁴(0.2)¹ + ¹⁵C₁₅0.8¹⁵ 0.2⁰

= 0.231 + 0.132 +0.035

= 0.398

Hence, the required probability is 0.398.

For more information about binomial distribution, visit :

https://brainly.com/question/15246027

#SPJ4