The work that must be supplied to the refrigerator for it to reject 1000 kj of heat to the room it is placed is 625 kj.
A refrigerator works by absorbing heat from inside and rejecting it to the outside environment. The coefficient of performance (COP) is a measure of its efficiency and is defined as the ratio of the heat removed from the refrigerator to the work supplied to it. In this case, the COP of the refrigerator is given as 1.6.
To find out how much work must be supplied to the refrigerator for it to reject 1000 kj of heat to the room, we can use the equation:
COP = Qc / W
where Qc is the heat rejected to the room and W is the work supplied to the refrigerator.
Rearranging the equation, we get:
W = Qc / COP
Substituting the given values, we get:
W = 1000 kj / 1.6
W = 625 kj
Therefore, the work that must be supplied to the refrigerator for it to reject 1000 kj of heat to the room it is placed is 625 kj. This means that the refrigerator is capable of transferring 1000 kj of heat from inside to outside by consuming 625 kj of work, making it an efficient cooling system.
For more such questions on Work.
https://brainly.com/question/14920200#
#SPJ11
A 4.0-kg block slides down a 35° incline at a constant speed when a 16-N force is applied acting up and parallel to the incline. What is the coefficient of kinetic friction between the block and the surface of the incline?
1) 0.20
2) 0.23
3) 0.26
4) 0.33
5) 0.41
The coefficient of kinetic friction between the block and the surface of the incline is 0.26. So, the correct answer is option 3.
The friction force, kinetic friction coefficient, and normal force are all represented in the equation Ff = μk x Fn, which can be used to determine this.
The coefficient of kinetic friction can be calculated by rearranging the equation to μk = Ff/Fn.
Since in this instance the friction force is 16N, the normal force is equal to the block's weight (mg), and the friction force is operating in the opposite direction of motion.
Given that the block's weight, 4 kg x 9.8 m/s² = 39.2N, equals the normal force, which is 39.2 N, the kinetic friction coefficient is 16N/39.2N = 0.26
Complete Question:
A 4.0-kg block slides down a 35° incline at a constant speed when a 16-N force is applied acting up and parallel to the incline. What is the coefficient of kinetic friction between the block and the surface of the incline?
1) 0.20
2) 0.23
3) 0.26
4) 0.33
5) 0.41
To learn more about friction force visit:
https://brainly.com/question/23161460
#SPJ4
what do you call impossible hoops in basketball
1.coincidence
2. luck
3. physics
4. magic
Impossible hoops in basketball is called Physics and that is option (3).
What is hoops in basketball?The term used to describe impossible hoops in basketball is "trick shot." A trick shot is a shot that is made in an unusual or difficult way, often for entertainment purposes or to show off skills.
While some trick shots may require a certain level of luck or coincidence, they are usually based on a combination of physics and skill.
Magic, on the other hand, implies an element of deception or illusion, which is not typically involved in basketball trick shots.
Learn more about hoops here:
https://brainly.com/question/29878009
#SPJ1
A yacht can sail at a maximum speed of 150 kilometersperhour. It is sailing from Key West toward the Bahamas at half of its top speed. If its velocity remains constant, how far will the yacht sail in 2hours?
Answer:
150 km
Explanation:
It has a maximum speed of 150 km/h, and it sails at half its top speed, so it sails at 75 km/h. If it remains constant for 2 hours, it will have gone 150km.
When holding a glass in static equilibrium, the nervous system much balance how many forces and how many torques?
The glass that produces a torque equal in magnitude and opposite in direction to the torque created by the weight of the glass.
When holding a glass in static equilibrium, the nervous system must balance two forces and one torque. The two forces are the weight of the glass (acting downward) and the force applied by the hand (acting upward). The torque is created by the weight of the glass acting on the center of mass of the glass, which produces a torque that tends to rotate the glass around its center of mass. To keep the glass in static equilibrium, the force applied by the hand must be equal in magnitude and opposite in direction to the weight of the glass, and must be applied at a distance from the center of mass of the glass that produces a torque equal in magnitude and opposite in direction to the torque created by the weight of the glass.
To learn more about weight visit:
https://brainly.com/question/10069252
#SPJ11
What theory explains how we hear high frequencies?
The place theory explains how we hear high frequencies.
The place theory of hearing proposes that the perception of high-frequency sounds is related to the location along the basilar membrane in the inner ear where different frequencies stimulate hair cells. Specifically, higher-frequency sounds stimulate hair cells located near the base of the membrane, while lower-frequency sounds stimulate hair cells located closer to the apex.
When a sound wave enters the ear, it causes the basilar membrane to vibrate, with different frequencies causing maximum displacement at different locations along the membrane. This leads to the activation of specific hair cells that send signals to the brain, where they are interpreted as distinct frequencies. The place theory provides a framework for understanding how the ear is able to distinguish between sounds of different frequencies.
You can learn more about place theory at
https://brainly.com/question/14338727
#SPJ11
What is a primary auxiliary view? Why do we use auxiliary views?
A primary auxiliary view is a type of drawing projection used in engineering and technical drawing to show the true shape and size of an object.
It is created by projecting lines perpendicular to the viewing plane of the primary view onto an auxiliary plane that is perpendicular to the primary view.
The primary auxiliary view is used to represent a surface or feature of the object that is not parallel to any of the standard planes of projection.
We use auxiliary views to provide a more accurate and complete representation of complex objects that cannot be fully depicted in a single view.
By using auxiliary views, we can show the true shape and size of features such as curves, angles, and intersecting surfaces that would otherwise appear distorted or unclear in a single projection.
This helps to ensure that engineering and technical drawings are precise and accurate, and can be used effectively in the design, manufacture, and assembly of products.
To know more about primary auxiliary view here
https://brainly.com/question/23514363
#SPJ11
true of false: the sum of the voltage sources in a circuit is equal to the sum of the voltage drops in that circuit
The given statement "the sum of the voltage sources in a circuit is equal to the sum of the voltage drops in that circuit" is true because of the law of conservation of energy, which states that energy cannot be created or destroyed, only transferred or transformed from one form to another.
According to Kirchhoff's voltage law (KVL), the sum of the voltage drops in a closed circuit is equal to the sum of the voltage sources in that circuit. This law is based on the principle of conservation of energy, which states that energy cannot be created or destroyed, only transferred or converted from one form to another.
Therefore, the total voltage supplied by the sources in a circuit must be equal to the total voltage used by the components in the circuit. This principle is essential in understanding and analyzing electrical circuits, as it helps ensure that energy is properly conserved and that the circuit functions correctly.
You can learn more about Kirchhoff's voltage law (KVL) at
https://brainly.com/question/15088107
#SPJ11
In the speech chain, the physiological level of the talker is associated with
A thin film of oil (n = 1.52) is located on a smooth, wet pavement. When viewed perpendicular to the pavement, it appears to be predominantly red (618 nm). What is the minimum thickness of the oil film in nm? Enter a number with one digit behind the decimal point.
The minimum thickness of the oil film is 203.3 nm (rounded to one decimal place).
The minimum thickness of a thin film of oil can be determined using the concept of thin film interference. In this case, the oil film appears predominantly red (618 nm) when viewed perpendicular to the pavement. The refractive index of the oil (n) is given as 1.52. We can use the following formula to calculate the minimum thickness (t) of the oil film:
t = (mλ) / (2n*cos(θ))
Here, λ is the wavelength of the red light (618 nm), m is the order of interference, and θ is the angle of incidence. Since the film is viewed perpendicular to the pavement, the angle θ is 0°, and cos(θ) is 1.
For minimum thickness, we can consider m = 1 (first-order interference):
t = (1 * 618 nm) / (2 * 1.52 * 1)
t ≈ 203.3 nm
Thus, the minimum thickness of the oil film is approximately 203.3 nm.
For more such questions on Minimum thickness.
https://brainly.com/question/4529883#
#SPJ11
An automobile of mass 1500kg moving at 25.0m/s collides with a truck of mass 4500kg at rest. The bumpers of the two vehicles lock together during the crash. What is the final velocity of the car and truck just after the collision?
the final velocity of the car and truck just after the collision is 6.25 m/s.
Momentum is defined as mass times velocity. it tells about the moment of the body. it is denoted by p and expressed in kg.m/s. mathematically it is written as p = mv. A body having zero velocity or zero mass has zero momentum. its dimensions is [M¹ L¹ T⁻¹]. Momentum is conserved throughout the motion.
According to conservation law of momentum initial momentum is equal to final momentum.
consider,
the mass of the truck M = 4500kg
mass of the car m = 1500kg
initial velocity of truck V₁ = 0
initial velocity of car v₁ = 25 m/s
final velocity of truck V₂ = ?
final velocity of car v₂ = ?
According conservation law momentum
M₁V₁+m₁v₁ = M₂V₂+m₂v₂
in this problem
bumpers of the two vehicles lock together, hence they have same velocity after collision, i.e. V₂=v₂ =v
equation becomes
MV₁+mv₁ = (M+m)v
4500kg×0 + 1500kg×25 = (4500kg+1500kg)v
37500= 6000v
v = 6.25 m/s
to know more about momentum :
https://brainly.com/question/30487676
#SPJ4.
scuba diver and her gear displace a volume of 65.0 l and have a total mass of 68.0 kg. (a) what is the buoyant force on the diver in seawater? (b) will the diver sink or float?
(a) The buoyant force on the scuba diver in seawater is approximately 66.3 N, calculated using Archimedes' principle. (b) The diver will sink since the buoyant force is less than the weight of the scuba diver and her gear.
(a) The buoyant force on the scuba diver can be calculated using Archimedes' principle, which states that the buoyant force on an object is equal to the weight of the fluid displaced by the object. The density of seawater is approximately 1025 kg/m³.
First, we need to convert the volume of the scuba diver and her gear into cubic meters:
65.0 L = 0.065 m³
Next, we can calculate the weight of the fluid displaced by the scuba diver and her gear:
weight = volume * density * gravity
where gravity is approximately 9.81 m/s².
weight = 0.065 m³ * 1025 kg/m³ * 9.81 m/s² ≈ 66.3 N
Therefore, the buoyant force on the scuba diver is approximately 66.3 N.
(b) To determine if the diver will sink or float, we need to compare the buoyant force to the weight of the scuba diver and her gear.
The weight of the scuba diver and her gear is 68.0 kg * 9.81 m/s² ≈ 667.1 N.
Since the buoyant force is less than the weight of the scuba diver and her gear, the diver will sink in seawater.
Learn more about buoyant force
https://brainly.com/question/21990136
#SPJ4
In a movie, a space ship explodes in outer space, and you hear a big boom a little bit after the very bright light flash. What is wrong with the movie?
The movie is incorrect in portraying the explosion in outer space as producing a sound and having a delayed flash of light.
A sound is a form of energy that travels through a medium, such as air or water, in the form of longitudinal waves. These waves are characterized by changes in pressure that cause particles of the medium to vibrate back and forth. Sound waves can be described in terms of their frequency, amplitude, and wavelength.
Frequency is the number of waves that pass a given point in a second, measured in Hertz (Hz). The amplitude is the maximum displacement of particles from their resting position, and it determines the loudness of the sound. Wavelength is the distance between successive peaks or troughs of the sound wave. Sound can be produced by vibrating objects, such as musical instruments or vocal cords. It can also be detected by the human ear, which is capable of perceiving sounds within a certain range of frequencies.
To learn more about Sound visit here:
brainly.com/question/29707602
#SPJ4
Strategy for Solving for Ideal Gas with Changing Conditions (initial and final): values given for (I) and (f) except one.
Strategy for solving for ideal gas with changing conditions includes the ideal gas law equation PV=nRT to solve for an ideal gas with changing conditions.
Identify the given variables for the initial and final conditions, and use the equation to solve for the missing variable.
Ensure the units used are consistent and convert if necessary.
The ideal gas law only applies to ideal gases at low pressure and high temperature, so if the conditions don't meet these criteria, another equation or method may be needed.
Lastly, keep track of the units of the answer and make sure they match the desired units.
Read more about Ideal gas
https://brainly.com/question/31463642
#SPJ11
A planet that has one third the mass of Earth and one third the radius of Earth has an escape velocity of
A planet that has one third the mass of Earth and one third the radius of Earth has an escape velocity of approximately 7.67 km/s.
To calculate the escape velocity of a planet with one third the mass and radius of Earth, we can use the formula for escape velocity:
escape velocity = √(2GM/r)
where G is the gravitational constant, M is the mass of the planet, and r is the radius of the planet.
Since the planet has one third the mass and radius of Earth, we can substitute these values into the formula:
M = (1/3)M_Earth
r = (1/3)r_Earth
where M_Earth and r_Earth are the mass and radius of Earth, respectively.
Substituting these values into the formula for escape velocity, we get:
escape velocity = √(2G(1/3)M_Earth/(1/3)r_Earth)
Simplifying this expression, we get:
escape velocity = √(2GM_Earth/r_Earth)
Therefore, the escape velocity of a planet with one third the mass and radius of Earth is the same as the escape velocity of Earth, which is approximately 11.2 km/s.
Hi! The escape velocity of a planet can be calculated using the formula:
Escape Velocity = √(2 * G * M / R)
where G is the gravitational constant (approximately 6.674 × 10^-11 m³ kg⁻¹ s⁻²), M is the mass of the planet, and R is the radius of the planet.
In this case, the planet has 1/3 the mass (M) and 1/3 the radius (R) of Earth. The mass and radius of Earth are approximately 5.972 × 10^24 kg and 6,371,000 meters, respectively.
So, for this planet:
M = (1/3) * 5.972 × 10^24 kg
R = (1/3) * 6,371,000 meters
Plug these values into the escape velocity formula:
Escape Velocity = √(2 * (6.674 × 10^-11 m³ kg⁻¹ s⁻²) * ((1/3) * 5.972 × 10^24 kg) / ((1/3) * 6,371,000 meters))
After calculating, the escape velocity for this planet is approximately 7.67 km/s.
For more such questions on escape velocity, click on:
https://brainly.com/question/29911258
#SPJ11
In the Bible, Noah is instructed to build an ark 300 cubits long, 50.0 cubits wide, and 30.0 cubits high.Historical records indicate a cubit is equal to half a yard.a) What would be the dimensions of the ark in meters?b) What would be the ark's volume in cubic meters? ( To approximate, assume that the ark is rectangular. )
The dimension of Noah's ark would be 137.16 × 22.86 × 13.716 meters, and the volume of the ark would be 43,169.74 cubic meters.
To convert the dimensions from cubits to meters, we need to know the exact length of a cubit in meters. As historical records indicate a cubit is equal to half a yard, and 1 yard is approximately 0.9144 meters, we can calculate:
1 cubit = 1/2 yard
1 cubit = 1/2 × 0.9144 meters
1 cubit = 0.4572 meters
So the dimensions of the ark in meters would be:
Length = 300 cubits × 0.4572 meters/cubit = 137.16 meters
Width = 50 cubits × 0.4572 meters/cubit = 22.86 meters
Height = 30 cubits × 0.4572 meters/cubit = 13.716 meters
Therefore, the dimension of the ark would be approximately 137.16 meters long, 22.86 meters wide, and 13.716 meters high.
To calculate the volume of the ark in cubic meters, we can use the formula:
Volume = Length × Width × Height
Volume = 137.16 meters × 22.86 meters × 13.716 meters
Volume = 43,169.74 cubic meters
Therefore, the approximate volume of the ark would be 43,169.74 cubic meters.
To learn more about volume visit: https://brainly.com/question/463363
#SPJ11
Which energy is the work done by when a force is acting through a distance?
if the ball is replaced with a disk of rotational inertia (1/2)MR^2, how will the velocity at the bottom change?
The final velocity of the disk at the bottom of the incline is 7.01 m/s, which is faster than the final velocity of the ball in the previous scenario.
If the ball is replaced with a disk of rotational inertia (1/2)MR^2, the calculations for the final velocity of the disk at the bottom of the incline will be different.
The kinetic energy of the disk can be expressed in terms of its rotational kinetic energy as:
K = (1/2) * I * w^2
where I is the moment of inertia of the disk, w is the angular velocity of the disk, and K is the kinetic energy.
The initial kinetic energy of the disk is equal to the initial potential energy of the disk due to its height above the bottom of the incline. Thus, we can write:
K = mgh
where m is the mass of the disk, g is the acceleration due to gravity, and h is the height of the disk above the bottom of the incline.
At the bottom of the incline, the kinetic energy of the disk is given by:
K' = (1/2) * I * w'^2
where w' is the final angular velocity of the disk, and K' is the final kinetic energy.
The work done by the force of friction is given by:
W_friction = f * d
where f is the force of friction and d is the distance over which the force is applied. In this case, the force of friction opposes the motion of the disk, so the work done by friction is negative:
W_friction = -mu_k * m * g * d
where mu_k is the coefficient of kinetic friction between the disk and the incline, and g is the acceleration due to gravity.
Using the conservation of energy principle, we can write:
K = K' + W_friction
Substituting the expressions for K, K', and W_friction, we get:
mgh = (1/2) * (1/2)MR^2 * w'^2 - mu_k * m * g * d
Simplifying and solving for w', we get:
w' = sqrt[(2gh - 4mu_kgd) / R^2]
Substituting the values given in the problem, we get:
w' = sqrt[(2 * 9.81 m/s^2 * 5.0 m - 0.2 * 9.81 m/s^2 * 5.0 m * 5.0 m) / (0.10 m)^2] = 70.1 rad/s (rounded to three significant figures)
The final linear velocity of the disk can be calculated using the relationship between linear and angular velocity:
v' = R * w'
Substituting the values given in the problem, we get:
v' = 0.10 m * 70.1 rad/s = 7.01 m/s
Therefore, the final velocity of the disk at the bottom of the incline is 7.01 m/s, which is faster than the final velocity of the ball in the previous scenario. This is because the disk has a lower moment of inertia than the ball, which allows it to accelerate more quickly in response to the force of gravity.
To learn more about velocity visit: https://brainly.com/question/17127206
#SPJ11
A child drags a 0.398 kg toy dog across flat ground at constant speed, with a 4.63 N force at a 63.0 degree angle. What is the component of the force of friction along the direction of motion on the toy? (you do not need to know the coefficient of friction.)
The component of the force of friction along the direction of motion on the toy is 1.96 N.
Since the toy dog is moving at a constant speed, the net force acting on it must be zero. Therefore, the force of friction acting on the toy must be equal in magnitude and opposite in direction to the force applied by the child.
We can find the component of the force of friction acting along the direction of motion on the toy using the formula: Ff = Fcosθ where F is the force applied by the child and θ is the angle between the force and the horizontal. Substituting the given values, we get: Ff = (4.63 N)cos(63.0°) = 1.96 N
Learn more about the force of friction at
https://brainly.com/question/30280752
#SPJ4
A disk has a moment of inertia of 3.0 ´ 10-4 kg×m2 and rotates with an angular speed of 3.5 rad/sec. What net torque must be applied to bring it to rest within 3 s?
To determine the net torque required to bring a disk with a moment of inertia of 3.0 x 10^-4 kg*m^2 and an angular speed of 3.5 rad/sec to rest within 3 seconds, we will use the following formula:
Torque (τ) = Moment of Inertia (I) × Angular Acceleration (α)
First, we need to find the angular acceleration. Angular acceleration is the change in angular speed divided by the time it takes for that change to happen:
Angular Acceleration (α) = (Final Angular Speed - Initial Angular Speed) / Time
Since we want to bring the disk to rest, the final angular speed will be 0 rad/sec. Thus:
α = (0 - 3.5 rad/sec) / 3 s = -1.1667 rad/s²
Now, we can calculate the net torque:
τ = I × α = (3.0 x 10^-4 kg*m^2) × (-1.1667 rad/s²) ≈ -3.5 x 10^-4 N*m
So, a net torque of approximately -3.5 x 10^-4 N*m must be applied to bring the disk to rest within 3 seconds.
You can learn more about moment of inertia at;
https://brainly.com/question/15246709
#SPJ11
By what factor is the total pressure greater at a depth of 850 m in water than at the surface where pressure is one atmosphere? (water density = 1.0 ´ 103 kg/m3, 1 atmosphere pressure = 1.01 ´ 105 N/m2, and g = 9.8 m/s2)
The total pressure is approximately 83.47 times greater at a depth of 850 m in water than at the surface.
To determine by what factor the total pressure is greater at a depth of 850 m in water than at the surface where pressure is one atmosphere, we need to follow these steps:
Step 1: Calculate the pressure due to water at 850 m depth
The pressure due to water at a certain depth can be calculated using the formula:
P_water = water density * g * depth
Step 2: Plug in the given values
P_water = (1.0 * 10³ kg/m³) * (9.8 m/s²) * (850 m)
Step 3: Calculate the pressure due to water
P_water = 8,330,000 N/m²
Step 4: Add the atmospheric pressure
Total pressure at 850 m depth = P_water + 1 atmosphere pressure
Total pressure at 850 m depth = 8,330,000 N/m² + 1.01 * 10⁵ N/m²
Total pressure at 850 m depth = 8,431,000 N/m²
Step 5: Calculate the factor by which the pressure is greater at 850 m depth than at the surface
Factor = Total pressure at 850 m depth / Atmospheric pressure at the surface
Factor = 8,431,000 N/m² / 1.01 * 10⁵ N/m²
Factor ≈ 83.47
Learn more about pressure:
https://brainly.com/question/28012687
#SPJ11
why is it critical that counter variables (or any variable for that matter) be properly initialized?
It is critical that counter variables (or any variable for that matter) be properly initialized because uninitialized variables can contain unpredictable or garbage values, which can lead to unexpected and erroneous behavior in a program.
For example, if a counter variable used in a loop is not properly initialized, its initial value may be unpredictable, and the loop may not execute the expected number of times or may not execute at all. Similarly, if a variable used to store user input is not properly initialized, it may contain garbage values, which can cause the program to behave in unexpected ways or even crash.
Properly initializing variables ensures that they have a known and consistent value at the start of their use, which helps to ensure the correctness and reliability of the program. Initializing variables can also help to prevent security vulnerabilities such as buffer overflows and other memory-related errors that can be exploited by attackers.
Therefore, it is good programming practice to always initialize variables before using them to ensure the program runs as intended and to avoid potential errors and security issues.
Learn more about variables here:
https://brainly.com/question/28248724
#SPJ11
A mass of 4.0 kg, resting on a horizontal frictionless surface, is attached on the right to a horizontal spring with spring constant 20 N/m and on the left to a horizontal spring with spring constant 50 N/m. If this system is moved from equilibrium, what is the effective spring constant?
This system is moved from equilibrium. So, the effective spring constant of the system is 33.33 N/m.
Due to the series connection of the two springs, this occurs. The sum of the individual spring constants divided by the quantity of springs in a series connection yields the overall spring constant.
In light of this, the system's effective spring constant is equal to (20 N/m + 50 N/m) / 2 or 33.33 N/m.
The spring constants must be added up, and the resulting value used to calculate displacement, in order to obtain the overall displacement of the mass.
This means that for every unit of force applied to the mass, it will move 33.33 N/m.
To learn more about displacement visit:
https://brainly.com/question/321442
#SPJ4
Question 2-1. Check with your lab instructor to find the temperature in the room, T, in degrees Celsius. Recalling that the speed of sound in air is given by
v = 331 m/s + (0.6 m/soC)T
What is the expected value of the speed of sound?
The expected value of the speed of sound in air at a temperature of 25°C is 346 m/s.
The expected value of the speed of sound can be calculated using the formula provided:
v = 331 m/s + (0.6 m/soC)T
First, we need to find out the value of T, which is the temperature in the room. We should check with the lab instructor to get this information. Once we know the temperature, we can plug it into the formula to find the expected value of the speed of sound.
For example, if the temperature in the room is 25°C, we can calculate the expected value of the speed of sound as follows:
v = 331 m/s + (0.6 m/soC)T
v = 331 m/s + (0.6 m/soC)(25°C)
v = 331 m/s + 15 m/s
v = 346 m/s
Therefore, the expected value of the speed of sound in air at a temperature of 25°C is 346 m/s.
Learn more about "speed": https://brainly.com/question/13943409
#SPJ11
a sphere of styrofoam with a density of 152 kg/m3 has a 45 cm diameter. if the sphere is placed in water, what is the maximum iron mass that can be suspended by a string from it so that it does not sink? previousnext
If the sphere is placed in water, the maximum iron mass that can be suspended by a string from it so that it does not sink would be 4.85 kg.
To determine the maximum iron mass that can be suspended from the styrofoam sphere without causing it to sink, we need to calculate the buoyant force acting on the sphere.
The buoyant force is equal to the weight of the displaced water, which is determined by the volume of the sphere submerged in water.
First, we need to calculate the volume of the sphere using its diameter:
Volume = [tex](4/3) \times \pi \times (diameter/2)^3[/tex]
Volume = [tex](4/3) \times \pi \times (45cm/2)^3[/tex]
Volume = [tex]3.87 \times 10^5 cm^3[/tex]
Next, we need to convert the volume to cubic meters:
Volume = [tex]3.87 \times 10^-1 m^3[/tex]
Since the density of the styrofoam is given as [tex]152 kg/m^3[/tex], we can calculate its mass as:
Mass = density x volume
Mass =[tex]152 kg/m^3 \times 3.87 \times 10^-1 m^3[/tex]
Mass = 58.5 kg
Now, we can calculate the buoyant force acting on the sphere:
Buoyant force = weight of displaced water
Buoyant force = density of water x volume of submerged sphere x acceleration due to gravity
Buoyant force = [tex]1000 kg/m^3 \times (4/3) \times \pi \times (22.5cm/100)^3 \times 9.81 m/s^2[/tex]
Buoyant force = 47.5 N
Finally, we can calculate the maximum iron mass that can be suspended from the sphere using the buoyant force:
Maximum iron mass = buoyant force/acceleration due to gravity
Maximum iron mass = [tex]47.5 N / 9.81 m/s^2[/tex]
Maximum iron mass = 4.85 kg
Therefore, the maximum iron mass that can be suspended from the styrofoam sphere without causing it to sink is approximately 4.85 kg.
For more such answers on buoyant force
https://brainly.com/question/17009786
#SPJ11
You measure the length of a distant car to be subtended by an angular distance of 1.5°.If the car is actually 5.0 m long, approximately how far away is the car?
The car is approximately 191 meters away.
To determine the distance to the car, we can use trigonometry. We know that the angular distance subtended by the car is 1.5°, and we know the actual length of the car is 5.0 m. We can set up a ratio using the tangent function:
tan(1.5°) = opposite/adjacent
where the opposite side is the length of the car (5.0 m) and the adjacent side is the distance to the car (which we are solving for).
Rearranging the equation, we get:
distance = opposite/tan(1.5°)
distance = 5.0 m / tan(1.5°)
Using a calculator, we find that tan(1.5°) is approximately 0.0262. Therefore:
distance = 5.0 m / 0.0262
distance ≈ 191 m
So the car is approximately 191 meters away.
Learn more about "distance": https://brainly.com/question/26550516
#SPJ11
if the net force on an object were doubled while at the same time the mass of the object was halved, then the acceleration of the object is
The acceleration of the object would be quadrupled if the net force on it were doubled while its mass was halved.
According to Newton's Second Law of Motion, the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. Therefore, if the net force on an object is doubled and its mass is halved, the acceleration of the object would be quadrupled (i.e., increased by a factor of 4).
Mathematically, this can be expressed as:
a = F_net / m
where a is the acceleration, F_net is the net force, and m is the mass of the object.
If the net force is doubled (i.e., 2F_net) and the mass is halved (i.e., m/2), then the acceleration becomes:
a' = (2F_net) / (m/2) = 4(F_net / m) = 4a
Therefore, the acceleration of the object would be quadrupled if the net force on it were doubled while its mass was halved.
To learn more about acceleration visit: https://brainly.com/question/12550364
#SPJ11
It takes 275 N to set a stationary 77.3 kg crate in motion. What is the coefficient of static friction?
The coefficient of static friction between the crate and the surface it is on is 0.362.
The force required to set a stationary crate in motion is given by the product of the coefficient of static friction (μs) and the normal force (N) acting on the crate. Thus, we can use the following formula to find μs:
μs = F / N
where F is the force required to set the crate in motion.
Substituting the given values of F = 275 N and m = 77.3 kg, we can find N using the formula N = mg, where g is the acceleration due to gravity.
N = (77.3 kg)(9.81 m/s²) = 758.413 N
Therefore, the coefficient of static friction is:
μs = F / N = 275 N / 758.413 N = 0.362
Learn more about static friction at
https://brainly.com/question/17237604
#SPJ4
With volume and molar quantity held constant, by what factor does the absolute temperature change for an ideal gas when the pressure is five times bigger?
0.2
1.0
5.0
10
25
The absolute temperature changes by a factor of 5.0 when the pressure is five times bigger, with volume and molar quantity held constant.
To determine by what factor the absolute temperature changes for an ideal gas when the pressure is five times bigger, with volume and molar quantity held constant, we will use the ideal gas law equation: PV = nRT.
In this case, since the volume (V) and the molar quantity (n) are constant, we can rearrange the equation to find the relationship between pressure (P) and temperature (T):
P1/T1 = P2/T2
Given that the pressure is five times bigger, P2 = 5 * P1. Now, we'll substitute this into the equation:
P1/T1 = (5 * P1)/T2
Since P1 is present on both sides of the equation, we can cancel it out:
1/T1 = 5/T2
Now, we want to find the factor by which the temperature changes (T2/T1):
T2/T1 = 5
So, when the pressure is five times greater, the absolute temperature changes by a factor of 5.0 but the volume and molar quantity remain constant.
Learn more about "temperature": https://brainly.com/question/25677592
#SPJ11
Review | ConstantsAn electron with an initial speed of 380,000 m/s is brought to rest by an electric field.what was the potential difference that stopped the electron
The potential difference that stopped the electron would be approximately 2.54 volts.We can find the potential difference that stopped the electron by using the following terms:
electron's charge (e), initial kinetic energy (KE), and work-energy principle.
Find the initial kinetic energy of the electron.
The initial kinetic energy (KE) can be calculated using the formula:
[tex]KE = 0.5 \times m \times v^2[/tex]
where m is the mass of the electron ([tex]9.109 \times 10^-31 kg[/tex]) and v is the initial speed (380,000 m/s).
Use the work-energy principle.
According to the work-energy principle, the work done by the electric field (W) on the electron is equal to the change in its kinetic energy. Since the electron comes to rest, the change in kinetic energy is equal to the initial kinetic energy (KE).
Calculate the work done by the electric field.
The work done by the electric field (W) can be calculated using the formula:
W = e x V
where e is the charge of the electron[tex](1.602 \times 10^-19 C)[/tex] and V is the potential difference.
Solve for the potential difference (V).
Since the work done by the electric field is equal to the initial kinetic energy, we can write the equation as:
e x V = KE
Now, solve for the potential difference (V):
V = KE / e
Plug in the values obtained in steps 1 and 3, and calculate V. This will give you the potential difference that stopped the electron. The value will be close to 2. 54 volts.
For more such answers on potential difference
https://brainly.com/question/24142403
#SPJ11
A pendulum is suspended from the ceiling of an elevator. When the elevator is at rest, the period is T. What happens to the period when the elevator is accelerating upward?
The period of the pendulum will increase when the elevator is accelerating upward.
The period of a pendulum is the time it takes for one complete oscillation, which is determined by the length of the pendulum and the acceleration due to gravity. In an elevator at rest, the acceleration due to gravity is the only force acting on the pendulum, and its period is T.
However, when the elevator accelerates upward, the effective gravitational force on the pendulum is reduced, causing the period to increase. This is because the pendulum experiences a net force in the upward direction, which reduces the effective acceleration due to gravity.
Learn more about the pendulum at
https://brainly.com/question/14759840
#SPJ4
