A screen is placed 35 cm from a single slit which is illuminated with 559 nm light. If the distance from the central maximum to the first minimum of the diffraction pattern is 2.6 mm, how wide is the slit in micrometer?

To calculate the gauge pressure in the water mains necessary for a firehose to spray water to a height of 45 meters, you can follow these steps:

Step 1: Identify the relevant variables. In this case, we need to find the gauge pressure (P) and are given the height (h) of 45 meters.

Step 2: Recall the formula for pressure in a fluid column, which is P = ρgh, where ρ is the fluid density, g is the acceleration due to gravity, and h is the height of the fluid column.

Step 3: Determine the density (ρ) of water. The density of water is approximately 1000 kg/m³.

Step 4: Determine the acceleration due to gravity (g). The acceleration due to gravity is approximately 9.81 m/s².

Step 5: Plug in the values into the formula. P = (1000 kg/m³)(9.81 m/s²)(45 m).

Step 6: Calculate the gauge pressure. P = 441,450 kg m/s² m² or 441,450 N/m² or 441.45 kPa.

In conclusion, the gauge pressure in the water mains necessary for a firehose to spray water to a height of 45 meters is 441.45 kPa.

To know more about gauge pressure :

https://brainly.com/question/29341536

#SPJ11

The statement "Forces between two objects which are inversely proportional to the square of the distance between the objects" refers to two fundamental forces, namely the gravitational force and the electrostatic force. The correct option is C.

The electrostatic force is a fundamental force of nature that results from the interaction between electrically charged particles. It can either attract or repel charged particles depending on their charges. Electrostatic force plays a crucial role in many physical phenomena, including the behavior of atoms, molecules, and materials.

Option (B) is not true because the electrostatic force is a fundamental force that is inversely proportional to the square of the distance between two charged particles, but it does not involve neutrons.

Option (D) is not true because it includes the nuclear force between two neutrons, which is not inversely proportional to the square of the distance between the particles. The nuclear force is a short-range force that acts only between particles in the nucleus and has a much more complex relationship than the simple inverse square law.

Therefore, the correct answer is an option (C) I and II only.

To learn about Coulomb's law click:

brainly.com/question/506926

#SPJ4

Unlike other synthesis methods, such as deductive synthesis or inductive synthesis, simulation synthesis focuses on creating a realistic simulation of the system in question

Simulation synthesis is a type of synthesis method that involves creating virtual models of a system or process in order to analyze its behavior. This simulation is then used to test different scenarios and determine the best course of action. The key difference between simulation synthesis and other methods is that simulation synthesis allows for a more detailed and nuanced analysis of the system, taking into account factors that may not be immediately apparent or easily quantifiable.

Additionally, simulation synthesis can be used to test a wide range of scenarios and variables, providing a more comprehensive understanding of how the system operates. Overall, simulation synthesis offers a powerful tool for understanding and optimizing complex systems and processes.

More on synthesis: https://brainly.com/question/28980572

#SPJ11

If the voltage across the ends of a wire is doubled and the material obeys Ohm's law, the correct statement concerning the resistance of the wire is:

e. The resistance is not changed.

This is because Ohm's law states that the voltage (V) across a conductor is directly proportional to the current (I) flowing through it, and the constant of proportionality is the resistance (R). The equation for Ohm's law is:

V = I * R

If the voltage is doubled and the material obeys Ohm's law, the current will also be doubled, but the resistance will remain constant.

The amount of opposition any item applies to the passage of electric current is referred to as resistance. An electrical component known as a resistor is used in the circuit to provide that particular level of resistance. Using the formula R = V I, any object's resistance is calculated.

for more information on Ohm's law  : https://brainly.com/question/1247379

#SPJ11

The minimum voltage needed to generate active force in the skeletal muscle is threshold voltage which is around -50 and -55 mV.

The skeletal muscle activation is dependent on voltage channels which allow change in sodium and potassium ion concentration on the nerve membrane. The neuromuscular junction allows the communication and the change in concentration of ions. The threshold voltage required to bring about the change is around -50 and -55 mV.

The action potential occurs in three steps, depolarization, repolarization and hyperpolarisation. Depolarisation spreads further lead to change in potential of sarcoplasmic reticulum which is the storehouse of calcium ions. These ions are released and bring about changes in protein structure making them available to bind to locomotory proteins.

Learn more about skeletal muscle -

https://brainly.com/question/31116738

#SPJ4

Our Sun will not become a nova because this phenomenon primarily occurs in stars with a binary companion. The correct option is D.

Novas typically involve a white dwarf star and a companion star in a close binary system. The white dwarf accumulates matter from the companion star, and when the accumulated matter reaches a certain mass, a thermonuclear explosion occurs, leading to a sudden increase in brightness, which we observe as a nova.

Stars that are much less massive or much more massive than the Sun, as well as those without planetary systems, are not the primary factors contributing to a nova event. The key factor is the presence of a binary companion, which allows for the transfer of matter necessary for the explosion to take place.

Since our Sun is a single star without a binary companion, it will not become a nova. Instead, it will eventually exhaust its nuclear fuel and expand into a red giant. Following this phase, it will shed its outer layers and form a planetary nebula, leaving behind a white dwarf at its core, which will eventually cool down over billions of years. So, the correct option is D.

For more such questions on Nova.

https://brainly.com/question/30761708#

#SPJ11

The EMF of the cell is 24 volts.

We can use the relationship between charge, energy, and EMF to solve this problem. The energy converted in the motor is equal to the product of the EMF of the cell and the charge that flows through it:

E = EMF * Q

where E is the energy, EMF is the electromotive force of the cell, and Q is the charge.

From the problem statement, we know that 450 C of charge flows through the motor and 9000 J of energy are converted in the motor. We also know that 1800 J of energy are dissipated in the cell. Therefore, the total energy provided by the cell is:

E_total = E_motor + E_dissipated

= 9000 J + 1800 J

= 10800 J

Using the equation above, we can solve for the EMF of the cell:

EMF = E/Q = E_total/Q = 10800 J/450 C = 24 V

Therefore, the EMF of the cell is 24 volts.

To learn more about electromotive visit:

https://brainly.com/question/13753346

#SPJ11

The magnitude of the electrostatic force on the charge is approximately 3.328 × 10^-6 N.

To find the magnitude of the electrostatic force on the charge, you can use the formula:

F = q * E

where F is the electrostatic force, q is the charge, and E is the electric field.

Given:
Charge (q) = -5.2 × 10^-6 C
Electric field (E) = 6.4 × 10^5 N/C

F = (-5.2 × 10^-6 C) * (6.4 × 10^5 N/C)
F ≈ -3.328 × 10^-6 N

Since we want the magnitude of the electrostatic force, we take the absolute value:
F ≈ 3.328 × 10^-6 N

So, the magnitude of the electrostatic force on the charge is approximately 3.328 × 10^-6 N.

To know more about electrostatic force click here:

https://brainly.com/question/9774180

#SPJ11

The magnitude of the acceleration of a proton from rest in a 7.5 x [tex]10^{6[/tex] N/C electric field is approximately 7.19 x [tex]10^{14} m/s^2[/tex].

The acceleration of a proton in an electric field can be calculated using the formula:

a = F/m

where a is the acceleration of the proton, F is the electric force acting on the proton, and m is the mass of the proton.

The electric force acting on the proton can be calculated using the formula:

F = qE

where F is the electric force, q is the charge of the proton, and E is the electric field strength.

The charge of a proton is +1.6 x [tex]10^{-19[/tex] C, and the electric field strength is 7.5 x [tex]10^{6[/tex] N/C. Substituting these values into the formula for the electric force, we get:

F = (1.6 x [tex]10^{-19[/tex] C) x (7.5 x[tex]10^{6[/tex] N/C)

F = 1.2 x [tex]10^{-12[/tex] N

The mass of a proton is 1.67 x [tex]10^{-27[/tex] kg.

Substituting this value and the calculated force into the formula for acceleration, we get:

a = (1.2 x [tex]10^{-12[/tex] N) / (1.67 x [tex]10^{-27[/tex] kg)

a = 7.19 x [tex]10^{14} m/s^2[/tex]

For similar question on magnitude of the acceleration

https://brainly.com/question/29678420

#SPJ11

Question :-

Suppose there is a 7.5 x [tex]10^6[/tex] N/C electric field in some region. Calculate the magnitude of the acceleration, in meters per second squared, of a proton from rest in such an electric field.

a. It would take 160 Joules of work to lift the fridge of wigs without a simple machine. b. It would take an effort force of 50 Newtons to lift the fridge of wigs.

Work is defined as the transfer of energy that occurs when a force is applied to an object and the object is moved through a distance in the direction of the force.

a. The work required to lift the fridge of wigs without a machine can be calculated using the formula:

Work = Force x Distance

Here, the force required to lift the fridge without a machine is 80 Newtons and the distance to be lifted is 2 meters. Therefore, the work required is:

Work = 80 N x 2 m = 160 Joules

So, it would take 160 Joules of work to lift the fridge of wigs without a simple machine.

b. With a lever having a mechanical advantage of 4, the effort force required to lift the fridge can be found using the formula:

Effort Force = Load Force / Mechanical Advantage

Here, the load force is the weight of the fridge, which is not given in the problem. Assuming the weight of the fridge is 200 Newtons (which is just an assumption and not given), the load force would be:

Load Force = Weight of Fridge = 200 N

The mechanical advantage of the lever is given as 4. Therefore, the effort force required to lift the fridge would be:

Effort Force = Load Force / Mechanical Advantage = 200 N / 4 = 50 Newtons

So, assuming the weight of the fridge to be 200 N and using a lever with a mechanical advantage of 4, it would take an effort force of 50 Newtons to lift the fridge of wigs.

Learn more about work here:

https://brainly.com/question/18094932

#SPJ1

The acceleration of the sled is 0.54 m/s², for a 28.7 kg sled is pulled forward with a 63.0 N force across the ground with uk = 0.169.

The force of friction acting on the sled can be calculated using the formula:

f_friction = uk × f_normal

where uk is the coefficient of kinetic friction and f_normal is the normal force acting on the sled.

f_normal = m × g

where m is the mass of the sled and g is the acceleration due to gravity (9.8 m/s²).

f_normal = 28.7 kg × 9.8 m/s² = 281.26 N

f_friction = 0.169 × 281.26 N = 47.50 N

The net force acting on the sled can be calculated using the formula:

f_net = f_applied - f_friction

where f_applied is the applied force on the sled.

f_applied = 63.0 N

f_net = 63.0 N - 47.50 N = 15.50 N

The acceleration of the sled can be calculated using the formula:

a = f_net / m

a = 15.50 N / 28.7 kg = 0.54 m/s²

Therefore, the acceleration of the sled is 0.54 m/s².

Learn more about acceleration at

https://brainly.com/question/12550364

#SPJ4

To best view the abs spectrum with average peak widths of approximately 15 nm, an ideal slit width to use in the monochromator would be around 10-15 nm.

This is because the slit width should be slightly smaller than the peak width to ensure the best resolution and sensitivity.

Using a slit width that is too large can result in decreased resolution and an inability to distinguish between closely spaced peaks.

On the other hand, using a slit width that is too small can result in reduced sensitivity and signal-to-noise ratio.

Therefore, a slit width of 10-15 nm would be ideal for viewing an abs spectrum with average peak widths of approximately 15 nm.

Learn more about "slit": https://brainly.com/question/29451443

#SPJ11

The approximate percentage of electrical energy converted to heat in the average incandescent light bulb is 95%.

In the average incandescent light bulb, approximately 95% of the electrical energy is converted to heat, while only about 5% is converted to visible light. This is because incandescent light bulbs work by heating a filament until it becomes hot enough to emit visible light. However, as the filament heats up, it also radiates a significant amount of energy in the form of heat, which is not useful for lighting purposes.

This is one of the reasons why incandescent light bulbs are being phased out in many countries in favor of more energy-efficient alternatives such as LED (light-emitting diode) bulbs. LEDs convert a much higher percentage of the electrical energy into visible light, resulting in significant energy savings and reduced heat output.

To learn more about electrical energy visit: https://brainly.com/question/16182853

#SPJ11

When locking the brakes at 26.3 m/s, the shortest stopping distance is approximately 44.1 meters.

To find the shortest stopping distance, we'll use the following terms and steps:

1. Coefficient of kinetic friction (μk) = 0.800
2. Initial velocity (v₀) = 26.3 m/s
3. Final velocity (v) = 0 m/s (the car comes to a stop)
4. Acceleration (a) = -μk × g (g = 9.81 m/s², acceleration is negative as it's decelerating)

Calculate the acceleration.
a = -0.800 × 9.81
a = -7.848 m/s²

Use the equation v² = v₀² + 2 × a × d, where d is the stopping distance.

Rearrange the equation to solve for d.
d = (v² - v₀²) / (2 × a)

Substitute the values into the equation and solve for d.
d = (0² - (26.3)²) / (2 × -7.848)
d = (-691.69) / (-15.696)
d ≈ 44.1 meters

So, the shortest stopping distance when locking the brakes at 26.3 m/s is approximately 44.1 meters.

More on distance: https://brainly.com/question/14849740

#SPJ11

The speed of the car after 5 seconds, given that the car has a uniform acceleration of 2 m/s² is 10 m/s

The following data were obtained from the question:

The final speed of the car can be obtained as demonstrated below:

v = u + at

Inputting the various parameters, we have

v = 0 + (2 × 5)

Clear bracket

v = 0 + 10

v = 10 m/s

Thus, from the above calculation, we conclude that the speed after 5 seconds is 10 m/s

Learn more about speed:

https://brainly.com/question/1861559

#SPJ1

Clear question:

A car starts at rest and has a uniform acceleration of 2 m/s² .Find the speed of the car the car after 5 seconds.

Assuming all surfaces and the pulley are frictionless, if the tension, T, is 15 N and the magnitude of the acceleration, a, is 3.0 m/s², the mass, m, of the suspended object is 5 kg.

To find the mass (m) of the suspended object, we will use Newton's second law of motion, which states that the net force acting on an object is equal to the product of its mass and acceleration (F = ma). In this case, the tension (T) in the cable is the net force acting on the object.

Given that T = 15 N and the acceleration (a) = 3.0 m/s², we can calculate the mass as follows:

T = ma
15 N = m × 3.0 m/s²

To find the mass, divide both sides of the equation by the acceleration:

m = 15 N / 3.0 m/s²

m = 5 kg

However, the provided options do not include 5 kg. Thus, none of the options are correct.

For more such questions on Mass.

https://brainly.com/question/30611138#

#SPJ11

If you rub the metal back and forth for twice as long a time, the temperature change will likely be different from before. Specifically, the temperature change will likely be greater because the metal will have been exposed to more frictional forces and thus more energy will have been transferred to the metal.

When you rub two surfaces together, friction is generated, which can cause the surfaces to heat up. The amount of heat generated depends on several factors, including the materials and roughness of the surfaces, the force applied, and the duration of the rubbing.

When you rub the metal back and forth for a longer time, the metal is exposed to more frictional forces, which results in more energy being transferred to the metal. This increased energy transfer leads to a greater temperature change in the metal, assuming that other factors remain constant.

However, it's important to note that there are limits to how much temperature change can occur due to rubbing. If the rubbing is too intense or prolonged, the metal can become damaged or deformed, which may limit the amount of temperature change that can occur. Additionally, other factors, such as the thermal conductivity of the metal and the surrounding environment, can affect temperature change as well.

In summary, if you rub the metal back and forth for twice as long a time, the temperature change will likely be greater due to increased energy transfer to the metal. However, there are limits to how much temperature change can occur, and other factors can also affect the outcome.

Learn more about temperature here:

https://brainly.com/question/26866637

#SPJ11

The angular displacement of the tires as the bike comes to a stop is approximately 251.02 radians.

The linear displacement of the bike is given by:

d = 100.0 m

The circumference of the tires is given by:

C = πd = π(0.800 m) = 2.51 m

The number of revolutions the tires make as the bike comes to a stop is:

n = d / C = 100.0 m / 2.51 m = 39.84 revolutions.

The angular displacement of the tires is equal to the number of revolutions multiplied by 2π radians per revolution:

θ = n × 2π = 39.84 rev × 2π rad/rev = 251.02 radians.

Therefore, the angular displacement of the tires as the bike comes to a stop is approximately 251.02 radians.

Learn more about angular displacement

brainly.com/question/13649539

#SPJ11

Approximately 1.5 nicotine patches containing 20 mg each would be required to potentially be lethal to half of the people weighing 60 kg

To answer your question, we need to calculate the lethal dose of nicotine for a person weighing 60 kg and then find out how many 20 mg nicotine patches would be required to reach that dose.

1. First, we need to know the median lethal dose (LD50) of nicotine, which is the dose that would be lethal to 50% of the population. The LD50 of nicotine is approximately 0.5 to 1 mg per kg of body weight.

2. Now, let's calculate the lethal dose for a 60 kg person:
LD50 = 0.5 mg/kg (minimum lethal dose) x 60 kg = 30 mg (minimum lethal amount)

3. Finally, we will determine how many 20 mg nicotine patches would reach the lethal dose:
Number of patches = Lethal dose / Patch nicotine content = 30 mg / 20 mg/patch = 1.5 patches

It's important to note that individual reactions to nicotine may vary, and this calculation is a rough estimate. In this scenario, approximately 1.5 nicotine patches containing 20 mg each would be required to potentially be lethal to half of the people weighing 60 kg. However, always follow the recommended usage instructions for nicotine patches to ensure safety.

More on nicotine: https://brainly.com/question/24212775

#SPJ11

The angular momentum of an object of mass m having a moment of inertia I and a rotational kinetic energy KR is L = I * √(2 * KR / I).

The rotational kinetic energy is given by the formula:

KR = (1/2) * I * ω²

Where ω is the angular velocity of the object in radians per second. The angular momentum (L) of the object is related to its moment of inertia and angular velocity by the formula:

L = I * ω

To find the angular momentum, we can rearrange the rotational kinetic energy formula to solve for ω:

ω = √(2 * KR / I)

Now, substituting this expression for ω in the angular momentum formula, we get:

L = I * √(2 * KR / I)

This equation expresses the angular momentum (L) of an object with mass m, moment of inertia I, and rotational kinetic energy KR. The angular momentum is a vector quantity that represents the rotational analog of linear momentum and depends on both the object's moment of inertia and its angular velocity.

Learn more about angular momentum here: https://brainly.com/question/30338110

#SPJ11

The Earth rotates once on its axis every 24 hours. This rotation results in the day-night cycle that we experience on Earth. The degree through which the Earth rotates in exactly 24 hours is 360 degrees. This means that the Earth rotates 15 degrees per hour.

To understand how this works, we can consider that the Earth is divided into 24 equal parts, each of which represents one hour of the day. As the Earth rotates, it moves through each of these parts or time zones, resulting in a change in the time of day. Each time zone is approximately 15 degrees of longitude wide. Therefore, as the Earth rotates 360 degrees in 24 hours, it moves through 24 time zones of 15 degrees each.
The rotation of the Earth is responsible for many phenomena, including the Coriolis effect, which causes air and water currents to curve as they move across the surface of the Earth. It also results in the apparent motion of the stars and the movement of the Sun across the sky throughout the day. Understanding the degree through which the Earth rotates in 24 hours is an essential component of studying these phenomena and many others related to the Earth's rotation.

For more such questions on rotation visit:

https://brainly.com/question/31596293

#SPJ11

As a collection of TypeScript libraries that you load into your apps, it offers both core and optional functionality. The given statement is False.

Torque is defined as the rate of change of angular momentum, which means that it is equal to the change in angular momentum over a small time interval:

τ = ΔL/Δt

Where τ is torque, ΔL is the change in angular momentum, and Δt is the time interval over which the change occurs.

This can be rearranged to give:

ΔL = τΔt

This shows that the change in angular momentum is equal to the torque multiplied by the time interval over which the torque acts.

With the use of HTML and TypeScript, single-page client apps may be created utilising the Angular platform and framework. TypeScript is used to create Angular. As a collection of TypeScript libraries that you load into your apps, it offers both core and optional functionality.

To learn more about angular visit:

https://brainly.com/question/14769426

#SPJ11

The impulse exerted on the clay ball caused a change in its momentum by 1 Ns.

To calculate the magnitude of the impulse exerted on the clay ball, we need to use the formula for impulse, which is:
Impulse = Force x Time
We know from the previous question that the force exerted on the clay ball was 5 N, and the time for which the force was applied was 0.2 seconds. Therefore, we can plug these values into the formula to get:
Impulse = 5 N x 0.2 s
Simplifying this expression gives us:
Impulse = 1 Ns
So, the magnitude of the impulse exerted on the clay ball is 1 Ns. This value tells us how much the ball's momentum changed due to the force applied on it. The unit for impulse is newton-second (Ns), which is the same as the unit for momentum. Therefore, we can say that the impulse exerted on the clay ball caused a change in its momentum by 1 Ns.

For more such questions on impulse visit:

https://brainly.com/question/30395939

#SPJ11

The highest usable audible frequency in the digital media file is 16 kHz.

To find the highest usable audible frequency in a 16-bit stereo sound sampled at 32 kHz with a bit-rate of 1.024 Mbps, you can use the Nyquist theorem. The theorem states that the highest frequency that can be accurately represented is half of the sampling rate.

Identify the sampling rate.
The sampling rate is 32 kHz.

Apply the Nyquist theorem.
The highest usable audible frequency = (Sampling rate) / 2
The highest usable audible frequency = 32 kHz / 2

The digital media file's maximum usable audible frequency is 16 kHz.

Learn more about frequency.

brainly.com/question/5102661

#SPJ11

As a charged particle moves freely in a circular path in the presence of a constant magnetic field applied perpendicular to the particle's velocity, the particle's kinetic energy (a) remains constant.

This is because the magnetic force acting on the charged particle is always perpendicular to its velocity, resulting in no work being done on the particle. Consequently, there is no change in its kinetic energy as it continues to move in a circular path.

The term “magnetic force” which can be explained as the force experienced by the electric charge, electric current and magnetic objects due to the magnetic field this force acts perpendicular to the direction of velocity of charge, current or magnetic material as in the above solution the moving charge travels experienced the magnetic force in negative Z-direction due to the magnetic field in which it was moving thus we can say that magnetic force is an vector quantity.

To learn more about magnetic field  https://brainly.com/question/14411049

#SPJ11

The total average power output of the star is 2.63 * 10^26 watts.

To find the total average power output of the star, we need to use the formula for the surface area of a sphere and the inverse square law for radiation. The formula for the surface area of a sphere is 4πr^2, where r is the distance from the center of the sphere to its surface.

Using this formula, we can find the surface area of a sphere with a radius of 2.0 * 10^10 m:

[tex]Surface area = 4πr^2\\Surface area = 4π(2.0 * 10^10)^2\\Surface area = 5.02 * 10^21 m^2\\[/tex]

Next, we need to use the inverse square law for radiation, which states that the intensity of radiation decreases with the square of the distance from the source. In other words, if the distance from the source is doubled, the intensity of radiation decreases by a factor of four.

Using this law, we can find the power output of the star:

Power output = intensity * surface area / 4πr^2
Power output = (5.0 * 10^3 W/m^2) * (5.02 * 10^21 m^2) / (4π(2.0 * 10^10)^2)
Power output = 2.63 * 10^26 W

Therefore, the total average power output of the star is 2.63 * 10^26 watts.

To know more about power output click here:

https://brainly.com/question/13937812

#SPJ11

The centripetal force on the 4 kg mass moving in a circular path of radius 4.10 m with a constant angular velocity of 5 rad/s is 81.25 N.

The centripetal force on a mass moving in a circular path is given by the formula:

F = mv^2/r

where m is the mass of the object, v is its velocity, and r is the radius of the circular path.

In this case, the mass of the object is 4 kg, the radius of the circular path is 4.10 m, and the angular velocity is 5 rad/s. We can use the following formula to convert from angular velocity to linear velocity:

v = rω

Where ω is the angular velocity.

v = 4.10 m × 5 rad/s = 20.5 m/s

Now, we can calculate the centripetal force:

F = mv^2/r = 4 kg × (20.5 m/s)^2/4.10 m = 81.25 N

Therefore, the centripetal force on the 4 kg mass moving in a circular path of radius 4.10 m with a constant angular velocity of 5 rad/s is 81.25 N.

To learn more about centripetal force visit: https://brainly.com/question/11324711

#SPJ11

Mechanical work is a commonly used measure of physiologic effort because it provides an objective and quantifiable assessment of the amount of force applied over a distance. This measure takes into account the amount of energy expended by the muscles and the mechanical efficiency of the body. However, it is important to note that mechanical work is just one aspect of physiologic effort and does not fully capture other important factors such as metabolic energy expenditure and the contribution of neural control.

In the context of physiology, mechanical work is the energy expended by the body's muscles and other systems to perform physical tasks. Physiologic effort is the amount of work or energy exerted by the body to accomplish a specific task or function. Physiologic effort is the amount of work or energy exerted by the body to accomplish a specific task or function.

Therefore, while mechanical work can be a useful measure, it should be used in conjunction with other measures to fully assess physiologic effort.

To know more about Physiologic effort:

https://brainly.com/question/28342387

#SPJ11

The one month earlier, Leo would have been high in the southern sky at midnight, with Virgo to the east and Cancer to the west, just as it was on the night  but it would have moved slightly to the west.

As the Earth revolves around the Sun, it also rotates on its axis, which causes the apparent positions of the stars to shift throughout the year. The stars appear to move across the sky due to the Earth's rotation, but they also appear to move over the course of the year due to the Earth's orbit around the Sun.

for such more questions on celestial sphere

https://brainly.com/question/14839466

#SPJ11

To calculate the total heat generated in the part, we need to use the formula:

Q = mcΔT

Where Q is the total heat generated, m is the mass of the part, c is the specific heat of the material, and ΔT is the change in temperature.

Given:

Mass of iron (m1) = 0.10 kg
Specific heat of iron (c1) = 450 J/kg°C
Mass of copper (m2) = 0.16 kg
Specific heat of copper (c2) = 390 J/kg°C
Change in temperature (ΔT) = 35°C

To find the total heat generated, we need to calculate the heat generated by each material and then add them together.

Heat generated by iron (Q1) = m1c1ΔT
= 0.10 kg x 450 J/kg°C x 35°C
= 1575 J

Heat generated by copper (Q2) = m2c2ΔT
= 0.16 kg x 390 J/kg°C x 35°C
= 2184 J

Total heat generated (Q) = Q1 + Q2
= 1575 J + 2184 J
= 3759 J

Therefore, the total heat generated in the part is 3759 J.

TO KNOW MORE ABOUT Heat genration CLICK THIS LINK-

brainly.com/question/21959031

#SPJ11