After publishing a BO, which file should be reviewed for possible errors and/or warnings during the publishing process?

All GBU-12 models use the Mk 82 bomb as a warhead. The GBU-12 is a laser-guided bomb that combines the Mk 82 bomb with a guidance system to increase accuracy when targeting specific locations.

The Mk 82 also serves as the warhead for the GBU-12, which uses laser guidance instead of the inertia- and GPS-based guidance of the GBU-38. In order for the GBU-12 to function as intended, the target must be designated with a laser device.

The GBU-12 Paveway II is an American aerial laser-guided bomb, based on the Mk 82 500-pound (227 kg) general-purpose bomb, but with the addition of a nose-mounted laser seeker and fins for guidance. A member of the Paveway series of weapons, Paveway II entered into service c. 1976.

To know more about bomb: https://brainly.com/question/1621958

#SPJ11

So it's important to check the specific standards being used for a particular broadcast delivery.It's important to note that different broadcast specifications may have different maximum peak level requirements,

One common broadcast delivery specification for audio is the European Broadcasting Union (EBU) R128 standard. According to this standard, the maximum intensity by which audio peaks are allowed to exceed the reference tone is -1 dBTP (decibels True Peak).

This means that audio peaks should not exceed 1 dB above the maximum level of the reference tone, which is typically set at -23 LUFS (Loudness Units Full Scale).

For example, if the reference tone level is set at -23 LUFS, the maximum peak level allowed would be -22 dBFS (decibels Full Scale) or -24 dBTP (decibels True Peak).

It's important to note that different broadcast specifications may have different maximum peak level requirements, so it's important to check the specific standards being used for a particular broadcast delivery.

Learn more about maximum peak level

brainly.com/question/30666784

#SPJ11

In a linked-based implementation of the ADT list with only a head reference, the performance of adding an entry at the end of the list is typically O(n) in the worst case scenario.

This is because in order to add an entry at the end of the list, you would need to traverse the entire list from the head reference until you reach the end, which takes a linear amount of time proportional to the number of entries in the list. However, if you have a tail reference in addition to the head reference, the performance of adding an entry at the end of the list can be improved to O(1) since you can simply update the tail reference to point to the new entry.
Hi! In a linked-based implementation of the ADT list with only a head reference, the performance of adding an entry at the end of the list is typically O(n). This is because you need to traverse the entire list to find the last node before adding a new entry.

To learn more about implementation click on the link below:

brainly.com/question/31439616

#SPJ11

The concise way of writing Mallory's query would be to use the IN clause.  The correct option is d.

IN clause

Mallory can write the query as "SELECT * FROM table_name WHERE COLOR IN ('Red', 'Pink', 'White')" to display the rows from the MySQL table that have these colors in the COLOR column. The IN clause allows you to specify multiple values in a single query. This statement selects all rows from the table where the COLOR column contains either "Red," "Pink," or "White."

The LIKE clause is used to search for a pattern in a column, the CONTAINS clause does not exist in MySQL, and the BETWEEN clause is used to select values within a range.

To know more about MySQL visit:

https://brainly.com/question/30763668

#SPJ11

The FMY-139 arming and delay time is set by adjusting the electronic components within the device.

How to set delay time and arming?

1. Power on the FMY-139 device.
2. Enter the device's menu system by pressing the appropriate button (refer to the device manual for specific button information).
3. Navigate to the "Arming" setting in the menu. Adjust the arming setting according to your needs by selecting the desired value (e.g., immediate, 5 seconds, 10 seconds, etc.).
4. Save the selected arming value by pressing the appropriate button (usually "OK" or "Enter").
5. Next, navigate to the "Delay Time" setting in the menu. Adjust the delay time by selecting the desired value (e.g., 1 second, 5 seconds, 10 seconds, etc.).
6. Save the selected delay time value by pressing the appropriate button (usually "OK" or "Enter").
7. Exit the menu system to return to the main screen.

Now, the arming and delay time settings on the FMY-139 have been set according to your preferences.

To know more about Delay Time visit:

https://brainly.com/question/28319426

#SPJ11

The three levels of cloud services defined by NIST are Option C. Software as a Service (SaaS), Platform as a Service (PaaS), and Infrastructure as a Service (IaaS).

SaaS is the highest level and provides a complete software application that is hosted and managed by a third-party provider, allowing users to access it via the Internet without the need for installation or maintenance. Examples of SaaS include email services, office applications, and customer relationship management software.

PaaS provides a platform for developers to create, test, and deploy their applications without having to worry about managing the underlying infrastructure. This level of service provides an environment with all the necessary tools and services needed for the development process.

IaaS is the lowest level of service and provides access to computing resources such as virtual machines, storage, and networking. With IaaS, users can build their own virtual infrastructure and have complete control over their computing resources, allowing them to configure and manage their own software and applications.

In summary, understanding the differences between SaaS, PaaS, and IaaS is crucial for organizations seeking to leverage cloud computing to optimize their business processes, improve efficiency, and reduce costs.

To learn more about cloud services, visit:

https://brainly.com/question/29097210

#SPJ11

The statement that the subject line in an email is optional is technically true, as most email services will allow you to send an email without a subject line. However, this does not mean that the subject line should be left blank or ignored. In fact, using a clear and concise subject line can make a big difference in the effectiveness of your email communication. Therefore, the statement is true.

The subject line is the first thing that the recipient sees when they receive your email. It gives them a quick preview of what the email is about and helps them determine whether or not to open it. If you don't include a subject line, the recipient may be less likely to open the email, or may even delete it without reading it.

In addition, using a subject line can help you to locate the email later on. Most email services allow you to search for emails by subject line, so if you need to refer back to a particular email, having a clear subject line can make it easier to find.

Overall, while the subject line in an email may be technically optional, it is highly recommended that you always include one. A clear and concise subject line can help to ensure that your email is read and understood, and can also make it easier for you to locate the email later on.

Learn more about email here:

https://brainly.com/question/14311364

#SPJ11

The time-to-arm (TA) and time-to-burst (TB) settings on the B83, which is a nuclear bomb, are located behind the weapon's arming panel

The time-to-arm (TA) and time-to-burst (TB) settings on the B83 are crucial for determining the proper functioning and safety of the weapon. These settings allow the bomb to be armed and timed to detonate at a specific point in time after being dropped or launched. It is important to note that the specific TA and TB settings are classified information and only authorized personnel have access to them. TA refers to the time it takes for the weapon to arm itself after being deployed, while TB refers to the time it takes for the weapon to detonate after being armed. These settings ensure that the B83 operates as intended and can be adjusted depending on the specific mission requirements.

To know more about B83 visit:

https://brainly.com/question/31606391

#SPJ11

Doubly connected edge list (DCEL) is a data structure used to represent the topology of a planar subdivision in computational geometry. It stores information about the vertices, edges, and faces of a planar subdivision and provides efficient operations for traversing it.

The DCEL is a powerful data structure in computational geometry that allows efficient traversal of planar subdivisions. It is used to represent the topology of a planar subdivision and is based on the concept of half-edges, where each edge is split into two half-edges, one for each direction.

The DCEL stores information about the vertices, edges, and faces of the planar subdivision. Each vertex is associated with a linked list of half-edges that originate from that vertex, while each edge is associated with two half-edges, one for each direction. Each face is also associated with a half-edge that lies on its boundary.

Using the DCEL, operations such as finding the neighbors of a vertex, walking along the boundary of a face, or finding the intersection between two edges can be performed efficiently. It is widely used in algorithms for problems such as polygon triangulation, Voronoi diagrams, and Delaunay triangulation.

Overall, the DCEL is a powerful data structure for representing planar subdivisions and has many practical applications in computational geometry. Its efficient operations make it an ideal choice for solving complex geometric problems in a structured manner.

To know about Doubly connected edge list more visit:

https://brainly.com/question/29977082

#SPJ11

A. Before insert and D. Before update triggers would need to be created by the developer to automatically populate the ReportsTo field in a Contact record based on the values of the related Account and Department fields in the record.

The developer would create a Before insert and a Before update trigger to automatically populate the ReportsTo field in a Contact record based on the values of the related Account and Department fields in the record.

A Before insert trigger would allow the developer to set the ReportsTo field before the record is inserted into the database. A Before update trigger would allow the developer to update the ReportsTo field before the record is updated in the database.

To know more about database visit:

https://brainly.com/question/6447559

#SPJ11

There are three freeze pane options available in Excel:

1. Freeze top Row

2. Freeze first Column

3. Freeze Panes

In Microsoft Excel, the freeze pane feature allows you to keep certain rows and columns visible while scrolling through a large worksheet. This can be particularly useful when you're working with a lot of data and need to reference certain information frequently. The three freeze pane options available in Excel, each with their own unique benefits are:

1. Freeze Top Row: This option will freeze the top row of your worksheet so that it remains visible while you scroll through the rest of the data. This can be helpful if you have column headings or other important information that you need to refer to frequently.

2. Freeze First Column: This option will freeze the first column of your worksheet so that it remains visible while you scroll horizontally. This can be useful if you have a lot of data in your worksheet and need to keep the first column (such as a list of names or dates) in view.

3. Freeze Panes: This option allows you to freeze both rows and columns at the same time. You can select a specific cell where you want the split to occur, and Excel will freeze everything above and to the left of that cell. This is useful if you need to keep a specific area of your worksheet visible while scrolling through the rest of the data.

Learn more about Excel here:

https://brainly.com/question/24202382

#SPJ11

\In most video editing software, such as Adobe Premiere Pro or Final Cut Pro, the following parameter(s) can be used to autosync or group separate audio and video clips in a bin:

Timecode: Timecode is a reference number that represents the exact frame or time in a video clip. Clips with matching timecodes can be synced automatically, grouping the separate audio and video clips together.

Audio Waveform: Audio waveforms are visual representations of the audio levels in a clip. Clips with matching audio waveforms can be synced automatically, aligning the audio and video clips together based on their waveform patterns.

In/Out Points: In/Out points are markers that can be set on a clip to specify a specific section of the clip to use in the edit. Clips with matching in/out points can be synced automatically, grouping the separate audio and video clips based on the selected sections.

Using these parameters, video editors can easily autosync or group separate audio and video clips in a bin, making it more efficient to work with multi-channel audio or multi-camera footage.

learn more about  parameters   here:

https://brainly.com/question/30757464

#SPJ11

A between subjects 2x2 factorial design with 30 participants randomly assigned to each factorial combination would require a total of 120 participants. This is because there are four factorial combinations (2x2), each with 30 participants, resulting in a total of 120 participants.

This is because the design has two independent variables, each with two levels, resulting in four factorial combinations. Each combination requires 30 participants, so to have 30 participants in each of the four combinations, we need to multiply 30 by 4, which equals 120 total participants.It is important to note that the sample size required for a study depends on several factors, such as the effect size, level of significance, power, and variability in the data. These factors should be taken into consideration when determining the appropriate sample size for a study.

To learn more about factorial click on the link below:

brainly.com/question/31459222

#SPJ11

The core of layered systems are transport layer protocols, which enable logical communication between application processes.

From the transport layer to the network layer, these operations require logical communication to convey data, and this data transfer needs to be trustworthy and secure.

Although the data is transferred in packet form, there is a difficulty with dependable data transfer.

The issue with data transfer affects not just the transport layer but also the application layer, connection layer, and other layers as well. This issue arises when a dependable service interacts with an unreliable service.

Therefore, The core of layered systems are transport layer protocols, which enable logical communication between application processes.

To learn more about Data transfer, refer to the link:

https://brainly.com/question/29980052

#SPJ1

To transform a CSV file into a PySpark DataFrame, we can use the read.csv() method provided by PySpark's SparkSession.

For an example, from pyspark.sql import SparkSession

spark = SparkSession.builder.app Name("CSVtoDF").getOrCreate()

df = spark.transform.csv("path/to/csv/file.csv", header=True, inferSchema=True)

To transform a JSON file into a PySpark DataFrame, we can use the read.json() method provided by PySpark's SparkSession.

For example:

from pyspark.sql import SparkSession

spark = SparkSession.builder.app Name("JSONtoDF").getOrCreate()

df = spark.transform.json("path/to/json/file.json")

To transform a Parquet file into a PySpark DataFrame, we can use the transform .parquet() method provided by PySpark's SparkSession.

For example:

from pyspark.sql import SparkSession

spark = SparkSession.builder.appName("ParquettoDF").getOrCreate()

df = spark.transform.parquet("path/to/transform /file.parquet")

Thus, in this example, we need to create a SparkSession object named spark.

For more details regarding Pyspark, visit:

brainly.com/question/29579693

#SPJ4

The type of software that protects a desktop from malicious attacks is known as antivirus software. Antivirus software is designed to detect, prevent, and remove malicious software from a computer system. This software is essential for protecting a computer system from malware, viruses, spyware, and other malicious attacks that can compromise the system's security.

Antivirus software works by constantly monitoring a computer system for any signs of malicious activity. It does this by scanning files, programs, and other system components for known patterns of malicious code. When it detects a threat, it immediately quarantines or removes the offending file or program.
In addition to its core functions, antivirus software may also include additional features such as firewalls, email scanners, and web filters to protect against other types of attacks. These features help to prevent unauthorized access to a computer system and ensure that only trusted sources are allowed to connect to the system.
It is important to keep antivirus software up-to-date to ensure that it is effective against the latest threats. Regular updates are released by the software providers to protect against new and emerging threats.

In summary, antivirus software is a crucial tool for protecting a desktop from malicious attacks. It monitors and scans a system for known threats, quarantines or removes any detected threats, and includes additional features to prevent unauthorized access to a system.

Learn more about firewall here:

https://brainly.com/question/30006064

#SPJ11

a) In a non-pipelined machine, each instruction must go through all five stages (IF, ID, EX, MEM, and WB) before the next instruction can start. Since each stage takes one clock cycle, each instruction takes 5 clock cycles to complete. For 5 instructions in a non-pipelined machine, you will need 5 instructions * 5 clock cycles/instruction = 25 clock cycles.

b) In a 5-stage MIPS pipeline, each stage takes one clock cycle, and multiple instructions can be in different stages at the same time. After the first instruction goes through all five stages (5 clock cycles), the following instructions only take one additional clock cycle each. So, for 5 instructions in a 5-stage MIPS pipeline, you will need 5 clock cycles for the first instruction + 4 clock cycles for the remaining 4 instructions = 9 clock cycles. The assumption here is that there are no pipeline hazards.

c) If the MIPS pipeline has k stages instead of 5, and each stage takes one clock cycle, the first instruction will take k clock cycles to complete. After that, each of the remaining (n-1) instructions will take one additional clock cycle. So, to complete n instructions, you will need k + (n-1) clock cycles. The assumption here is that there are no pipeline hazards or stalls.

Learn more about MIPS pipeline:

brainly.com/question/31597624

#SPJ11

The code provided is written in MATLAB, a numerical computing environment. It creates a 3x2 matrix named matrixA with the values [-1, 31] in the first row, [20, 10] in the second row, and [-3, 0] in the third row.

Then it applies the all function along the second dimension (columns) of matrixA and stores the result in a variable called allResult.

The all function in MATLAB returns a logical scalar (either true or false) for each row in a matrix, indicating whether all the elements in that row are non-zero (i.e., not equal to zero). If all elements in a row are non-zero, the corresponding entry in the result will be true, otherwise, it will be false.

Based on the values in matrixA, the resulting allResult would be a column vector of logical values with the same number of rows as matrixA. Since all the values in matrixA are non-zero, the allResult would be a logical column vector.

learn more about  code   here:

https://brainly.com/question/497311

#SPJ11

It is not recommended to combine the two tables, INVOICES and INVOICE_LINE in the KimTay database because they represent different entities and have different levels of detail.

The INVOICES table represents the high-level information about an invoice, such as the invoice number, customer information, and total amount due. On the other hand, the INVOICE_LINE table represents the line items or individual products/services included in an invoice, such as the item description, quantity, and unit price.

Combining these two tables would result in a denormalized table that contains redundant data and may lead to data inconsistencies, data duplication, and increased storage requirements. It would also make it harder to query the data for specific information, as the information would be spread across multiple columns in a single table, rather than organized in a normalized manner across two separate tables.

In general, a normalized database design, where data is organized into separate tables based on logical entities and relationships between them, is preferred over a denormalized design, as it reduces data redundancy, improves data integrity, and makes it easier to query and maintain the database.

Therefore, it is recommended to keep the INVOICES and INVOICE_LINE tables separate in the KimTay database and use a proper data relationship (such as a foreign key) to link the line items to their respective invoices.

Learn more about foreign key here:

https://brainly.com/question/15177769

#SPJ11

During the second step of the TCP three-way handshake, the flag or flags that are sent in the segment are ACK and SYN.

This step involves the receiving host sending an acknowledgement (ACK) to the initiating host indicating that it has received the SYN (synchronize) flag from the first step. The receiving host also sends a SYN flag back to the initiating host, indicating that it agrees to establish a connection.
The SYN flag is used by the initiating host to request that the receiving host synchronize its sequence numbers for the upcoming data exchange. The ACK flag, on the other hand, is used to acknowledge receipt of the SYN flag from the initiating host.
By sending both the SYN and ACK flags in the same segment during the second step of the TCP three-way handshake, the receiving host is indicating that it is ready and willing to establish a connection with the initiating host. This allows the two hosts to proceed to the final step of the handshake, during which the initiating host sends an ACK to the receiving host, finalizing the connection establishment.

In summary, the flags that are sent in the segment during the second step of the TCP three-way handshake are ACK and SYN. These flags play a critical role in establishing a reliable and secure connection between two hosts on a network.

Learn more about TCP three-way handshake here:

https://brainly.com/question/31545335

#SPJ11

Suppose you have a PySpark DataFrame df with columns name, age, and gender, and you want to select only the rows where the age is greater than 30, the code is below.

You can use the .where() transformation to do this as follows:

from pyspark.sql.functions import col

df_filtered = df.where(col("age") > 30)

In this code, col() is a pyspark.sql.functions module function that returns a Column based on the given column name.

The.where() transformation accepts a condition as an argument and returns a new DataFrame with only the rows that satisfy the condition.

The condition in this case is col("age") > 30, which selects only rows with an age column value greater than 30.

Thus, the resulting DataFrame df_filtered will only contain rows that meet this condition.

For more details regarding PySpark, visit:

https://brainly.com/question/29579693

#SPJ4

When performing technology mapping, the number of 6-input LUTs required depends on the structure of the circuit being mapped.

a) The minimum number of LUTs required would be 34. This is because with 5 primary inputs, each 6-input LUT can handle up to 6 inputs, so you would need at least 34/6 = 5.67 LUTs, which rounds up to 6.

b) The maximum number of LUTs required would be 34. This is because the circuit only has 1 primary output, so it can be mapped onto a single 6-input LUT, which has a maximum of 64 possible inputs.

c) The minimum number of LUTs required would be 7. This is because with 5 primary outputs, each output would require its own 6-input LUT, and the remaining gates could be combined into a single LUT.

d) The maximum number of LUTs required would be 42. This is because with 5 primary outputs, each output would require its own 6-input LUT, and the remaining gates would need to be mapped onto additional LUTs. With 200 2-input gates, this would require at least 34 LUTs (as calculated in part a), but additional LUTs may be needed depending on the specific structure of the circuit.

To learn more about technology visit : https://brainly.com/question/7788080

#SPJ11

In order to print or copy at any JMU library, you will need to have a JAC card or guest card with funds loaded onto it. You can use these funds to pay for any printing or copying you need to do.

The libraries also offer printing from personal devices and scanning services. You can find more information about printing and copying at JMU libraries on their website.

If you as a student wants to researching an unfamiliar topic on JMU Libraries' homepage,  one need to have the best place to start your research and this  would be the use of "Background Information" link.

Background information sources is known to be one that tends to  provide a lot of overview of a topic as well as one that can help you as a person to know the key concepts, as well as  terminology, and context.

Therefore, This type of information is one that is especially helpful if a person is  just starting their  research and so they need to get a full sense of what they are researching before going into more specific resources.

Learn more about JMU libraries here

https://brainly.com/question/31608415

#SPJ11

The values of i for each iteration are: 0, 1, 2, 3, 4, and 5.

To determine the values of i for each iteration of the given for-loop: for (i = 0; i < 6; ++i) {}, follow these steps:

1. Initialize i to 0: i = 0

2. Check if i < 6, since 0 < 6, enter the loop

3. Increment i by 1: i = 1

4. Check if i < 6, since 1 < 6, enter the loop

5. Increment i by 1: i = 2

6. Check if i < 6, since 2 < 6, enter the loop

7. Increment i by 1: i = 3

8. Check if i < 6, since 3 < 6, enter the loop

9. Increment i by 1: i = 4

10. Check if i < 6, since 4 < 6, enter the loop

11. Increment i by 1: i = 5

12. Check if i < 6, since 5 < 6, enter the loop

13. Increment i by 1: i = 6

14. Check if i < 6, since 6 is not less than 6, exit the loop.

Read more about for loops : https://brainly.com/question/19706610

#SPJ11

Effective access time is a metric used to measure the average time it takes to access data in a demand-paged memory system. It is computed by taking into account the page fault rate, the memory access time, and the time required to handle a page fault.

For such more question on average

https://brainly.com/question/20118982

#SPJ11

The law that protects individuals from third-party wiretaps is Option C.  Electronic Communications Privacy Act (ECPA).

The ECPA was enacted in 1986 to extend the wiretapping provisions of the federal wiretap law, known as the Omnibus Crime Control and Safe Streets Act, to include electronic communications. The law protects wire, oral, and electronic communications by prohibiting unauthorized interception, access, and disclosure of such communications.

Under the ECPA, third-party wiretaps are prohibited, which means that individuals and organizations cannot intercept or access electronic communications without the consent of at least one party involved in the communication. This includes emails, phone calls, and other electronic communications.

In addition to prohibiting third-party wiretaps, the ECPA also establishes requirements for obtaining a warrant to intercept electronic communications. The law requires that law enforcement officials obtain a warrant based on probable cause before intercepting electronic communications, with few exceptions.

Therefore, Option C. ECPA is the correct answer.

To learn more about Wiretap law, visit:

https://brainly.com/question/29897760

#SPJ11

The value of sortedMtx in array after executing the statement sortedMtx = sort([ 55, 8, 99, 32 ]); is [8, 32, 55, 99].

An array is a data structure that stores a collection of items of the same type. It is typically used to store a large number of objects in a single, easily-referenced location. Arrays are typically stored in memory, and can be accessed sequentially or randomly. Arrays are often used to store numerical data, such as in scientific simulations, but can also be used to store objects and strings. Arrays can be dynamically resized, enabling the user to store more items in the same amount of space. Arrays are also used for sorting and searching algorithms, as the elements in an array can be quickly compared and sorted. Arrays are commonly used in programming languages, such as C, Java, and Python, to store collections of data.

To learn more about array

https://brainly.com/question/30019790

#SPJ1

No, onDestroy() should not be solely relied upon to destroy resources.

onDestroy()

onDestroy() is a method that is called when an activity is being destroyed. While it's a part of Android's activity lifecycle and is called when the activity is being destroyed, there are scenarios where it may not be invoked, such as when the system kills your app process to reclaim resources.  It is possible for the system to destroy an activity without calling onDestroy(), such as during low memory situations. Therefore, it is best practice to manually release and destroy resources in the appropriate lifecycle methods, such as onPause() or onStop(), in addition to onDestroy(). This ensures that resources are properly cleaned up and memory leaks are avoided.

To know more about lifecycle methods visit:

https://brainly.com/question/30892316

#SPJ11

When a router knows a better first-hop for a particular destination address, it sends a message called a "Redirect" to the sender. This message informs the sender that there is a more optimal first-hop router to reach the desired destination address, allowing the sender to update its routing table and improve the efficiency of its network communication.

A redirect message is used by a router to inform the sender that a better route to the destination exists through a different next-hop router. This can occur when a router receives a packet from a sender that is destined for a network that can be reached through a better next-hop router than the one the sender is using.

The redirect message contains the IP address of the new next-hop router, and the sender is expected to update its routing table accordingly. This helps to ensure that packets are forwarded to the correct next-hop router, improving the efficiency and reliability of the network.

To know more about IP address visit:

https://brainly.com/question/16011753

#SPJ11

The value of allResult after running the given code will be 1. The code matrixA = [ -6, -11; 2, 37; -3, 0 ]; creates a 3x2 matrix matrixA with the following values.

makefile

Copy code

matrixA =

  -6  -11

   2   37

  -3    0

The code allResult = all(all(matrixA,2)); applies the all function twice in succession. The first all function with the argument matrixA checks if all elements in each row of matrixA are non-zero. The result of this operation will be a logical array [0; 1; 0] representing the rows that meet the condition (0 for the first row, 1 for the second row, and 0 for the third row).

The second all function with the argument [0; 1; 0] checks if all elements in this logical array are non-zero. Since all elements in [0; 1; 0] are non-zero, the result of this operation will be 1, which is assigned to the variable allResult.

learn more about   matrixA  here:

https://brainly.com/question/14822004

#SPJ11