ambient pH (the bohr effect)

Now we have a whole number ratio of 3:4 between sulfur and iron. Therefore, the empirical formula of the sulfide of iron is [tex]Fe_3S_4[/tex].

To find the empirical formula of the sulfide of iron, we first need to determine the moles of sulfur and iron in the compound.

Moles of Sulfur = 1.926 g / 32.06 g/mol = 0.060 moles

Moles of Iron = 2.233 g / 55.85 g/mol = 0.040 moles

Next, we need to determine the smallest whole number ratio between the moles of sulfur and iron.

0.060 moles Sulfur / 0.040 moles Iron = 1.5

This ratio is not a whole number, so we need to multiply both the sulfur and iron moles by 2 to get a whole number ratio.

0.060 moles Sulfur x 2 = 0.120 moles Sulfur

0.040 moles Iron x 2 = 0.080 moles Iron

Learn more about empirical formula Visit: brainly.com/question/1603500

#SPJ4

Correct Question:

A sulfide of iron was formed by combining 1.926g of sulfur(S) with 2.233g of iron (Fe). What is the compound’s empirical formula?

What would be the solution of this?

the molar mass of the unknown diprotic acid will be 47.11 g/mol using the formula of the given acids i.e., sodium hydroxide & acid.

To solve this problem, we need to use the formula:
moles of acid = moles of base
First, let's calculate the number of moles of NaOH used:
moles of NaOH = concentration of NaOH x volume of NaOH used
moles of NaOH = 0.148 M x 0.01095 L
moles of NaOH = 0.0016254 mol

Since the acid is diprotic, it will require twice the number of moles of NaOH to neutralize both protons. Therefore, the number of moles of the unknown diprotic acid can be calculated as:
moles of acid = 2 x moles of NaOH
moles of acid = 2 x 0.0016254 mol
moles of acid = 0.0032508 mol

Now, we can use the formula for molar mass:
molar mass = mass of the acid/moles of the acid
The mass of the acid is given as 0.1532 g:
molar mass = 0.1532 g / 0.0032508 mol
molar mass = 47.11 g/mol

learn more about molar mass here

https://brainly.com/question/837939

#SPJ11

To increase the length of the carbon skeleton by one carbon, we need to perform a nucleophilic substitution reaction that replaces the bromine atom with a longer carbon chain.

One way to do this is to react the primary alkyl bromide with a Grignard reagent that contains one more carbon than the alkyl bromide. For example, reacting 1-bromobutane with ethylmagnesium bromide (C[tex]^{2}[/tex]H[tex]^{5}[/tex]MgBr) will yield 1-pentanol and MgBr[tex]^{2}[/tex] as a byproduct. This reaction is an example of a Grignard reaction and is commonly used in organic synthesis to extend carbon chains.

*complete question: Starting with a primary alkyl bromide, how do you obtain an overall increase in the length of the carbon skeleton by one carbon ?

More on carbon: https://brainly.com/question/29837612

#SPJ11

The Ion Product (IP) is calculated by multiplying the concentrations of the ions present in the solution, each raised to the power of their respective stoichiometric coefficients.

The significant aspect about the Ion Product (IP) is that it helps determine the solubility of a compound in a solution. This value is then compared to the solubility product constant (Ksp) to determine if the solution is saturated, unsaturated, or supersaturated.

Step 1: Calculate the Ion Product (IP) using the given concentrations of the ions in the solution and their stoichiometric coefficients.
Step 2: Compare the Ion Product (IP) to the solubility product constant (Ksp) of the compound.
Step 3: Determine the solubility state of the solution:
- If IP < Ksp, the solution is unsaturated, and more solute can dissolve.
- If IP = Ksp, the solution is saturated, and no more solute can dissolve.
- If IP > Ksp, the solution is supersaturated, and precipitation may occur.

To know more about Ion Product:

https://brainly.com/question/14393921

#SPJ11

The description that fits best is: "an activated complex is an unstable combination of reactant species representing the highest energy state of a reaction system."

A brief-lived species called an activated complex, commonly referred to as a transition state, develops during a chemical process. It is a highly energetic intermediate state where the reactant molecules are momentarily linked in a manner distinct from that of the starting materials or the products.

The activated complex immediately disintegrates into the products or returns to the reactants due to its instability. The energy barrier that must be crossed in order for the reaction to take place is represented by the activation energy, which is needed to produce the activated complex.

The activated compound is not a catalyst and is not separated from the reactants by a distinct phase. It is merely a transient, highly energetic intermediate state that develops during a chemical process. It cannot be directly viewed, but its presence can be deduced from theoretical calculations or experimental findings.

To know more about the activated complex refer here :

https://brainly.com/question/4358233#

#SPJ11

Calculate the pH of the 500 mL buffer containing 0.15 M benzoic acid (C6H5COOH) and 0.25 M sodium benzoate (C6H5COONa). To find the pH, we will use the Henderson-Hasselbalch equation and the given Ka value for benzoic acid (6.3 × 10^-5).

Step 1: Write the Henderson-Hasselbalch equation:
pH = pKa + log ([A-]/[HA])

Step 2: Calculate the pKa from the given Ka:
pKa = -log(Ka) = -log(6.3 × 10^-5) ≈ 4.20

Step 3: Identify the concentrations of the acid [HA] and its conjugate base [A-]:
[HA] = 0.15 M (benzoic acid)
[A-] = 0.25 M (sodium benzoate)

Step 4: Plug the values into the Henderson-Hasselbalch equation:
pH = 4.20 + log(0.25/0.15)

Step 5: Calculate the pH:
pH ≈ 4.20 + 0.41 ≈ 4.61

So, the pH of the 500 mL buffer containing 0.15 M benzoic acid and 0.25 M sodium benzoate is approximately 4.61.

To know more about Henderson-Hasselbalch equation:

https://brainly.com/question/30466186

#SPJ11

True , The prediction of the sign of ΔS depends on the difference in entropy between the reactants and products. In this reaction, there are two moles of gas molecules on the reactant side ([tex]C_{2} H_{4}[/tex](g) and [tex]H_{2}[/tex](g)), and one mole of gas molecule on the product side ([tex]C2H_{6}[/tex](g)).

The entropy of a system is generally expected to increase with an increase in the number of available microstates or possible arrangements of its constituent particles. However, there are other factors, such as changes in the structure or intermolecular forces of the molecules that can also influence the entropy of the system. Therefore, it is not possible to predict the sign of ΔS for this reaction based solely on the given chemical equation.

Learn more about prediction ,

https://brainly.com/question/31561722

#SPJ4

d. 84% is the percent composition of Carbon, in, C₇H₁₆

% composition is quite straightforward. You can determine by mass how much of each element is contained in a compound using its percent composition. A chemical compound is created when two or more components are combined.

The hydrocarbon includes 80% carbon, which translates to 80% of the molar mass being made up of carbon. Consequently, the hydrocarbon has four carbon atoms.

The percent composition is calculated by multiplying the total mass or quantity of an element present in a molecule or compound by the molecular mass of the compound.

learn more about molecular mass

https://brainly.com/question/837939

#SPJ1

The glycosidic bond of sucrose is alpha, beta(1,2) because it is formed between the alpha glucose and beta fructose molecules through a condensation reaction, which results in the loss of a water molecule. The alpha glucose molecule donates its anomeric carbon to the fructose molecule, forming an alpha glycosidic bond between carbon 1 of glucose and carbon 2 of fructose. The beta-fructose molecule, on the other hand, donates its anomeric carbon to the glucose molecule, forming a beta glycosidic bond between carbon 2 of glucose and carbon 1 of fructose. Therefore, the resulting glycosidic bond of sucrose is alpha, beta(1,2).

The glycosidic bond in sucrose is alpha, beta(1,2) due to the following reasons:

1. Sucrose is a disaccharide composed of two monosaccharides, glucose and fructose.
2. The glycosidic bond forms between the anomeric carbon of glucose (C1) and the anomeric carbon of fructose (C2).
3. In glucose, the hydroxyl group attached to C1 is in the alpha configuration (pointing down from the ring).
4. In fructose, the hydroxyl group attached to C2 is in the beta configuration (pointing up from the ring).
5. The glycosidic bond forms when the alpha-configured hydroxyl group of glucose and the beta-configured hydroxyl group of fructose react, resulting in a bond with the nomenclature alpha, beta(1,2).

So, the glycosidic bond of sucrose is called alpha, beta(1,2) because it's formed between the alpha-configured C1 of glucose and the beta-configured C2 of fructose.

Learn more about glycosidic bonds at https://brainly.com/question/6834008

#SPJ11

The concentration of the solution is 3M.

When it comes to determining the concentration of a solution, molarity is the key unit of measurement. Represented by the symbol M, this metric gauges the quantity of solute that has been dissolved in a specific volume of solution. Essentially, molarity refers to the number of moles of solute present per liter of solution.

Equation:

The solution contains 6 moles of solute and 2 liters of solution. So the molarity can be calculated as:

Molarity = moles of solute / liters of solution

Molarity = 6 moles / 2 liters

Molarity = 3 M

To know more about Molarity, click here

https://brainly.com/question/31545539

#SPJ1

C. Succinate dehydrogenase.

Overexpression of succinate dehydrogenase enzyme is likely to result in increased levels of HIF, as it stabilizes HIF through accumulation of succinate.

The protein that is probably going to bring about expanded degrees of HIF is C. Succinate dehydrogenase. Succinate dehydrogenase (SDH) is a chemical engaged with the Krebs cycle and the electron transport chain of cell breath.

It changes over succinate to fumarate in the Krebs cycle and assumes a pivotal part in the electron transport chain. SDH likewise assumes a part in the guideline of hypoxia-inducible elements (HIFs), which are record factors that control the cell reaction to low oxygen levels.

Overexpression of SDH can prompt an amassing of succinate, which hinders the action of prolyl hydroxylases that regularly target HIF for debasement. This outcomes in the adjustment and enactment of HIF, which thus prompts an expansion in the statement of qualities associated with cell variation to hypoxia. In this manner, overexpression of SDH can bring about expanded degrees of HIF.

To learn more about Overexpression enzyme, refer:

https://brainly.com/question/31581031

#SPJ4

The word equation that represents the violent reaction between sodium and water to produce sodium hydroxide and hydrogen gas is:

Sodium + Water → Sodium Hydroxide + Hydrogen

The reactants and products involved in a chemical reaction, as well as their relative amounts, are shown in a chemical equation which is a symbolic representation of the process.

Therefore, The hydrogen gas could ignite and burst as a result of this reaction's strong exothermicity and potential heat release. As a result, it's crucial to handle sodium with caution and carry out this response in a controlled setting.

Learn more about chemical equation here : brainly.com/question/30265799

#SPJ1

The pI of a negatively charged (acidic) amino acid can be calculated by averaging the pKa values of the carboxyl and amino groups.

The pI (isoelectric point) of an amino acid is the pH at which it has no net charge, and it is a function of the ionization states of the amino and carboxyl groups. To calculate the pI of a negatively charged (acidic) amino acid such as aspartic acid or glutamic acid, the following steps can be followed:

1) Identify the two ionizable groups: the carboxyl group (-COOH) and the amino group (-NH2).

2) Determine the pKa values for the acidic and basic groups. For aspartic acid, the pKa values are approximately 2.0 for the carboxyl group and 9.8 for the amino group. For glutamic acid, the pKa values are approximately 2.2 for the carboxyl group and 9.7 for the amino group.

3)The pI can be calculated by taking the average of the two pKa values. For aspartic acid, the pI is approximately (2.0 + 9.8) / 2 = 5.9. For glutamic acid, the pI is approximately (2.2 + 9.7) / 2 = 5.95.

For such more questions on Amino acid:

https://brainly.com/question/31181997

#SPJ11

We need to add 0.025 moles of HCl to the buffer to change the pH by one pH unit.

First, you need to determine the initial pH of the buffer solution. Let's assume it is pH 7.0. Next, let's assume that the buffer is made up of 0.1 moles of weak acid (HA) and 0.1 moles of conjugate base (A-) in 1 liter of solution. This gives us a concentration of 0.1 moles/L for both HA and A-.

Now, if we want to change the pH of the solution by one pH unit, we need to either increase or decrease the concentration of H+ ions by a factor of 10. This means that we need to add either 0.1 moles/L of H+ ions (to decrease the pH) or 0.1 moles/L of OH- ions (to increase the pH).
Since we are adding a strong acid to the buffer, we can assume that it will completely dissociate and provide H+ ions. Let's assume that we are using hydrochloric acid (HCl), which has a concentration of 1 mole/L.

To calculate how much HCl we need to add to the buffer, we need to use the formula:
moles of HCl = (volume of HCl) x (concentration of HCl)
We know that we are starting with 25 ml of buffer, so we need to convert this to liters:
25 ml = 0.025 L
Now we can plug in our values:
moles of HCl = (0.025 L) x (1 mole/L)
moles of HCl = 0.025 moles

Learn more about buffer here:

https://brainly.com/question/22821585

#SPJ11

To balance the half-reaction MnO4- → MnO2, 2 water molecules are needed, and they will appear as a product.

To identify the number of water molecules needed to balance the half-reaction [tex]MnO_{4} ^{-}[/tex] → [tex]MnO_{2}[/tex] and determine if water appears as a reactant or a product, follow these steps:

1. Balance the non-hydrogen and non-oxygen atoms first (in this case, manganese): [tex]MnO_{4} ^{-}[/tex] → [tex]MnO_{2}[/tex] is already balanced for manganese.
2. Balance the oxygen atoms by adding water molecules to the side that lacks oxygen. In this case, we need to add 2 water molecules to the right side (product side) of the equation: [tex]MnO_{4} ^{-}[/tex] → [tex]MnO_{2}[/tex] + 2[tex]H_{2}O[/tex]
3. Balance the hydrogen atoms by adding [tex]H^{+}[/tex] ions to the side that lacks hydrogen. In this case, we need to add 4[tex]H^{+}[/tex] ions to the left side (reactant side) of the equation: [tex]MnO_{4} ^{-}[/tex] + 4[tex]H^{+}[/tex] → [tex]MnO_{2}[/tex] + 2[tex]H_{2}O[/tex]

To know more about Balanced Reactions:

https://brainly.com/question/14125179

#SPJ11

Answer:

218.75 mL

Explanation:

We would have to use the equation P1V1=P2V2, P= pressure, V= volume.

So we would put the numbers in and do the math.

175*150=120V, multiply on the left side

26250=120V, then divide 120 from both sides

218.75=V and since we didn't convert anything, it would still be in milliliters.

Since 0.7143 mol of nitrogen is greater than 0.6875 mol of oxygen, 10 g of N contains more atoms than 11 g of O.

To determine which contains more atoms, 11 g of O (oxygen) or 10 g of N (nitrogen), we need to compare the number of moles of each element using their molar masses.

The molar mass of oxygen (O) is 16 g/mol, and the molar mass of nitrogen (N) is 14 g/mol.

To find the number of moles, use the formula:

moles = mass / molar mass

For oxygen:
moles of O = 11 g / 16 g/mol = 0.6875 mol

For nitrogen:
moles of N = 10 g / 14 g/mol = 0.7143 mol

Since 0.7143 mol of nitrogen is greater than 0.6875 mol of oxygen, 10 g of N contains more atoms than 11 g of O.

To learn more about moles, refer below:

https://brainly.com/question/26416088

#SPJ11

To calculate the empirical formula, we first need to determine the moles of each element present in the compound.

Assuming a 100g sample of the compound, we can calculate the mass of each element present:

Mass of H = 11.19g
Mass of O = 88.79g

Next, we need to convert these masses into moles:

Moles of H = 11.19g / 1.01 g/mol = 11.08 mol
Moles of O = 88.79g / 16.00 g/mol = 5.55 mol

To find the simplest whole number ratio of the elements, we divide the number of moles of each element by the smallest number of moles:

Moles of H / Moles of O = 11.08 mol / 5.55 mol = 2

Therefore, the empirical formula of the compound is H2O.

To know more about empirical formula :

https://brainly.com/question/13058832

#SPJ11

When an electron in a hydrogen atom at level 1 absorbs 10.2 eV of energy, it becomes excited and moves to level 2. Typically, the electron will then release this energy as a photon and return to its original level (level 1) in a process called spontaneous emission. This transition releases a photon with the same energy as the absorbed one, which is 10.2 eV.

When an electron in a hydrogen atom absorbs 10.2 eV of energy and moves from level 1 to level 2, it becomes excited. Typically, the excited electron will eventually release this energy in the form of a photon, as it returns to its ground state. This process is known as spontaneous emission. The wavelength of the photon emitted will correspond to the energy difference between the two energy levels.

To know more about hydrogen atom click here:

https://brainly.com/question/29695801

#SPJ11

The magnitude of the elevator's acceleration is 1.63 m/s².

The weight of an object is the force with which it is attracted to the center of the Earth due to gravity. On solid ground, your weight is equal to your mass times the acceleration due to gravity (g), which is approximately 9.81 m/s². Therefore, your mass would be;

mass = weight / g = 151 lb / (9.81 m/s² × 2.2046 lb/kg)

≈ 68.49 kg

In the elevator, your apparent weight is different because the elevator is accelerating. The force acting on you in the elevator is the sum of your weight and the force due to the acceleration of the elevator, which is given by;

force = mass × (g + acceleration)

When the elevator is moving upward with an acceleration a, your apparent weight is;

131 lb = mass × (g + a)

Substituting the value of mass, we get;

131 lb = 68.49 kg × (9.81 m/s² + a)

Solving for a, we get;

a = (131 lb / 68.49 kg - 9.81 m/s²)

≈ 1.63 m/s²

To know more about magnitude here

https://brainly.com/question/28173919

#SPJ4

--The given question is incomplete, the complete question is

"When you weigh yourself on good old terra firma (solid ground), your weight is 151 lb. In an elevator your apparent weight is 131 lb . What is the magnitude of the elevator's acceleration?"--

Producing electrical energy once again and the direction of the reaction is reversed, and the nickel hydroxide is oxidized while the cadmium is reduced.

A Nickel Cadmium [tex](NiCad)[/tex] battery undergoes a redox reaction during the discharge process.

During the discharge of a [tex]NiCad[/tex] battery, the anode (negative electrode) is made of cadmium, and the cathode (positive electrode) is made of nickel hydroxide. The electrolyte is typically a solution of potassium hydroxide [tex](KOH)[/tex].

The reaction at the anode can be represented as follows:

[tex]Cd + 2OH- → Cd(OH)2 + 2e-[/tex]

In this reaction, cadmium metal [tex](Cd)[/tex] is oxidized to cadmium hydroxide [tex](Cd(OH)2)[/tex] while releasing two electrons. The hydroxide ions [tex](OH-)[/tex] in the electrolyte act as the oxidizing agent.

At the cathode, nickel hydroxide [tex](Ni(OH)2)[/tex] is reduced to nickel oxyhydroxide [tex](NiOOH)[/tex] while absorbing two electrons, which can be represented as:

[tex]Ni(OH)2 + 2e- → NiOOH + H2O + OH-[/tex]

In this reaction, the nickel ions are reduced by gaining two electrons, and the hydroxide ions in the electrolyte act as a source of hydrogen ions [tex](H+)[/tex] and water [tex](H2O)[/tex].

The overall reaction for the discharge of a [tex]NiCad[/tex] battery can be summarized as:

[tex]Cd + Ni(OH)2 → Cd(OH)2 + NiOOH[/tex]

This reaction involves the transfer of electrons from cadmium at the anode to nickel hydroxide at the cathode. The electrical energy produced by this redox reaction is stored in the battery and can be used to power various devices.

The direction of the reaction is reversed, and the nickel hydroxide is oxidized while the cadmium is reduced, producing electrical energy once again.

Learn more about nickel hydroxide

brainly.com/question/31473454

#SPJ11

The alcohol in fermented drinks is option (E) HOCH₂CH₂OH, also known as ethyl alcohol or ethanol.

Fermentation is the process in which microorganisms convert sugars into alcohol and carbon dioxide. In the case of alcoholic beverages, the sugar source can be fruits, grains, or other plant materials. The type of alcohol produced is determined by the specific microorganism used in the fermentation process and the type of sugar source.

Ethanol is the most common type of alcohol found in fermented drinks, and its chemical formula is C₂H₅OH or CH₃CH₂OH. It is a colorless and flammable liquid with a characteristic odor and taste. Ethanol is used as a psychoactive substance in alcoholic beverages, but it also has other applications in industry, medicine, and fuel production.

Option (A) CH₃CH₂CH₂OH is a primary alcohol known as 1-butanol, which is not commonly found in fermented drinks. Options (B) CH₃CH₂OH and (C) CH₃OH are also alcohols, but they are not commonly found in fermented drinks either. Option (D) (CH₃)₂CHOH is a secondary alcohol known as 2-propanol or isopropyl alcohol, which can be found in some fermented beverages but is not as common as ethanol.

To know more about  ethyl alcohol, refer here:
https://brainly.com/question/11237501#
#SPJ11

Phenols, thiophenols, and alkylbenzenes all share a common structural feature: the presence of an aromatic benzene ring. Specifically, they all contain a benzene ring with various substituents attached to it.

Phenols have a hydroxyl (-OH) group attached to the ring, thiophenols have a sulfur (S) atom attached to the ring, and alkylbenzenes have one or more alkyl groups (such as methyl, ethyl, or propyl) attached to the ring.

Despite their different substituents, all three types of compounds have the same basic ring structure, which is responsible for their unique properties and reactivities.

What is thiophenol ?

Thiophenol, is an organic compound with the chemical formula C6H5SH. It is a clear to yellowish liquid with a strong odor, similar to that of garlic. Thiophenol is used in various applications, including as a building block for organic synthesis and as a stabilizer for polymers. It is also a precursor for the production of fungicides and insecticides.

To know more about Phenols:

https://brainly.com/question/30906889

#SPJ11

Elements that are shiny, malleable, ductile, most often solid at room temperature, and good conductors of heat and electricity are known as  metals.

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

Learn more about element,here:

https://brainly.com/question/14347616

#SPJ4

To calculate the new volume of a balloon when the temperature drops, use the formula [tex]V2 = V1(T2/T1)[/tex]. The new volume is 2.34 L.

To compute the new volume of a gas when the temperature transforms, we want to utilize the ideal gas regulation, which expresses that [tex]PV = nRT[/tex], where P is the strain of the gas, V is its volume, n is the quantity of moles, R is the all inclusive gas steady, and T is the outright temperature. We can accept that the strain and number of moles of the gas stay consistent.

Nonetheless, in this issue, we are given the volume and temperature of an inflatable, which suggests that the gas inside is certainly not an optimal gas. In any case, we can involve the ideal gas regulation as an estimation since the gas is near ideal circumstances.

To tackle for the new volume, we can utilize the recipe [tex]V2 = V1(T2/T1)[/tex], where V1 is the underlying volume, T1 is the underlying temperature, T2 is the last temperature, and V2 is the last volume we are attempting to find.

Subbing the given qualities, we get:

[tex]V2 = 2.50 L * (284.15 K/303.15 K) = 2.34 L[/tex]

Hence, on the off chance that the temperature decreases from 30.0∘C to 11.0∘C, the volume of the inflatable would diminish from 2.50 L to 2.34 L. The recipe to utilize is [tex]V2 = V1(T2/T1)[/tex], which relates the underlying volume and temperature to the last volume and temperature utilizing a consistent proportion.

To learn more about an example of balloon temperature drop, refer:

https://brainly.com/question/21902585

#SPJ4

The molecular formula of a compound that has a molar mass of 92.0 g/mol and an empirical formula of [tex]NO_2[/tex] is [tex]N_2O_4[/tex]. The correct option is C.

To determine the molecular formula of a compound with a molar mass of 92.0 g/mol and an empirical formula of [tex]NO_2[/tex], we need to follow these steps:

1. Calculate the molar mass of the empirical formula ([tex]NO_2[/tex]).
2. Determine the ratio between the molar mass of the molecular formula and the empirical formula.
3. Multiply the empirical formula by the ratio to find the molecular formula.

Step 1: Calculate the molar mass of  ([tex]NO_2[/tex]).
- Nitrogen (N) has a molar mass of 14.0 g/mol, and oxygen (O) has a molar mass of 16.0 g/mol.
- So, the molar mass of  ([tex]NO_2[/tex]). is [tex]14.0 + (2 \times 16.0) = 14.0 + 32.0 = 46.0[/tex] g/mol.

Step 2: Determine the ratio between the molar mass of the molecular formula (92.0 g/mol) and the empirical formula (46.0 g/mol).

- Ratio = (Molar mass of molecular formula) / (Molar mass of empirical formula)
- Ratio = 92.0 g/mol / 46.0 g/mol = 2

Step 3: Multiply the empirical formula ( [tex]NO_2[/tex]) by the ratio (2) to find the molecular formula.
- Molecular formula =[tex]NO_2 \times2=N_2O_4[/tex]

So, the molecular formula of the compound is [tex]N_2O_4[/tex] (Option C).

To know more about molecular formula refer here:

https://brainly.com/question/28647690#

#SPJ11

The property of sodium reacting with water, releasing hydrogen gas (H2) and heat, is a chemical property of sodium.

A physical property is a characteristic of a substance that can be observed or measured without changing the identity of the substance. Physical properties include color, density, hardness, and melting and boiling points. A chemical property describes the ability of a substance to undergo a specific chemical change.

#SPJ11

Learn more about properties of sodium: https://brainly.com/question/20688856

To determine the final temperature of sand when 300 calories of heat is added to 100 grams of sand at an initial temperature of 20°C, we need to know the specific heat capacity of sand. The specific heat capacity is the amount of heat energy required to raise the temperature of a certain amount of a substance by 1 degree Celsius.

The final temperature of the sand will be 20°C + 0.16°C = 20.16°C.

we need to use the equation: Q = mcΔT

Where Q is the heat energy transferred, m is the mass of the object (in this case, the sand), c is the specific heat capacity of the object (which tells us how much energy is needed to raise the temperature of 1 gram of the object by 1 degree Celsius), and ΔT is the change in temperature.

First, let's calculate the heat energy transferred:

Q = 300 cal

Next, let's determine the specific heat capacity of sand. The specific heat capacity of sand varies depending on the type of sand, but let's assume it is around 0.19 J/g°C.

Now we can use the equation to solve for ΔT:

300 cal = 100 g x 0.19 J/g°C x ΔT

Simplifying:

300 cal = 19 J/g°C x 100 g x ΔT

ΔT = 300 cal / (19 J/g°C x 100 g)

ΔT = 0.16°C

Therefore, the final temperature of the sand will be 20°C + 0.16°C = 20.16°C.

To know more about Heat capacity refer here:-

https://brainly.com/question/28921175#

#SPJ11

Collagen where the proline is not hydroxylated is less stable compared to collagen where the proline is hydroxylated. Hydroxylation of proline is an important post-translational modification that increases the stability of the collagen triple helix.

This process involves the addition of a hydroxyl group to the proline residue, converting it into hydroxyproline. The presence of hydroxyproline increases hydrogen bonding within the collagen structure, thereby enhancing its stability and strength.

In contrast, the absence of hydroxylation in proline results in weaker hydrogen bonding and a less stable collagen structure. This makes non-hydroxylated collagen more susceptible to degradation and less capable of maintaining its structural integrity.

To know more about Hydroxylation refer here:

https://brainly.com/question/23639315#

#SPJ11

The rate law for the proposed mechanism can be determined by examining the rate-determining step, which is the slowest step in the mechanism. In this case, the slowest step is step 1, which involves the collision of N2O and H2 to form N2 and H2O. Therefore, the rate law for the overall reaction can be written as:

Rate = k[N2O][H2]

where k is the rate constant and [N2O] and [H2] are the concentrations of the reactants.

It is important to note that the coefficients in the balanced equation do not necessarily correspond to the stoichiometric coefficients in the rate law. This is because the rate law depends on the specific mechanism of the reaction, which may involve multiple steps with different stoichiometries.

Additionally, the rate law only includes the reactants that are involved in the rate-determining step. In this case, N2 and H2O are not included in the rate law because they are not involved in the slowest step.

Overall, understanding the rate law for a reaction is important for predicting how changing the concentration of reactants will affect the rate of the reaction. It also provides insight into the specific mechanism of the reaction and how different steps may contribute to the overall rate.