An electroscope is given a positive charge, causing its foil leaves to separate. When an object is brought near the top plate of the electroscope, the foils separate even further. We could conclude
(A) that the object is positively charged.
(B) that the object is electrically neutral.
(C) that the object is negatively charged.
(D) only that the object is charged.
(E) only that the object is uncharged.

The oscillation will be faster when the mass M is increased.

The maximum velocity in a simple harmonic oscillation is given by,

v(max) = Aω

A is the amplitude and ω is the angular frequency.

The angular frequency of the spring,

ω = √(k/m) where k is the spring constant and m is the mass

Therefore, to increase the velocity of oscillation, the angular frequency must be increased.

So, to increase angular frequency, the mass M should be increased.

To learn more about velocity of oscillation, click:

https://brainly.com/question/12532152

#SPJ4

The maximum acceleration of the object is 10.94 x 10² m/s².

The equation of displacement is given as,

y(t) = 4.8 cos(15.1 t)

It is in the form, y(t) = A cos(ωt)

So, the amplitude of the SHM, A = 4.8 m

Angular frequency, ω = 15.1 s⁻¹

The maximum acceleration,

a(max) = -Aω²

the -ve sign indicates that the acceleration is acting towards the mean position.

a(max) = 4.8 x 15.1²

a(max) = 10.94 x 10² m/s²

To learn more about acceleration of pendulum, click:

https://brainly.com/question/28102387

#SPJ4

The charge q must be placed at a distance 0.449 cm from 2q and 0.551cm from 3q.

The electric force on q due to 2q,

F₁ = kq(2q)/r²

The electric force on q due to 3q,

F₂ = kq(3q)/(1 - r)²

For the net force on q to be zero, F₁ must be equal to F₂. So,

kq(2q)/r² = kq(3q)/(d - r)²

r² = 2(1 - r)²/3

r = (1 - r)(√2/3)

r = 0.816(1 - r)

1.816r = 0.816

Therefore,

r = 0.449 cm

So, 1 - r = 0.551 cm

To learn more about electric force, click:

https://brainly.com/question/20935307

#SPJ4

The magnitude of the force of friction acting on the block is 1.6 N. So, the correct answer is option 4.

This can be estimated using the formula Ff = μmgcosθ, where Ff is the frictional force, μ is the frictional coefficient, m is the mass of the block, g is the acceleration brought on by gravity, and is the inclined plane's angle.

Substituting the given values, Ff = 0.2 × 1 × 9.8 × cos(22) = 1.6 N.

To maintain equilibrium, the block must be able to resist the force of 7 N being imparted to it by friction.

This is so that the block wouldn't need any external force to accelerate down the hill if there were no friction.

The frictional force also contributes to the block's acceleration of 1.4 m/s², as the force needed to accelerate the block must be greater than the frictional force.

Complete Question:

A 1.0-kg block is pushed up a rough 22° inclined plane by a force of 7.0 N acting parallel to the incline. The acceleration of the block is 1.4 m/s² up the incline. Determine the magnitude of the force of friction acting on the block.

1) 1.9 N

2) 2.2 N

3) 1.3 N

4) 1.6 N

5) 3.3 N

To learn more about magnitude visit:

https://brainly.com/question/30337362

#SPJ4

Answer:

26.8%

Explanation:

T`he position of the 0.64-kg mass at t = 5.0 s is 0.138 m.

To find the position of the 0.64-kg mass undergoing simple harmonic motion at t = 5.0 s, we need to substitute t = 5.0 s into the given equation for x:
x = (0.160 m) cos (π/16)
x = (0.160 m) cos [(π/2) (5.0 s)/16]
x = (0.160 m) cos (π/6)
[tex]x = (0.160 m) (\sqrt{(3)/2} )[/tex]
x = 0.138 m
Therefore, the position of the 0.64-kg mass at t = 5.0 s is 0.138 m. It is important to note that in simple harmonic motion, the position of the mass oscillates back and forth around its equilibrium position with a certain amplitude and period. The given equation represents the position of the mass as a function of time, and the cosine function describes the oscillatory behavior.

The period of the motion is 32 s (since the argument of the cosine function goes through a full cycle every 32 s), and the amplitude of the motion is 0.160 m (since that is the maximum displacement from equilibrium). Understanding the behavior of simple harmonic motion is important in many fields, including physics, engineering, and mathematics.

For more such questions on position visit:

https://brainly.com/question/2364404

#SPJ11

If we increase the diameter of the circular aperture, the angle for Rayleigh's criterion decreases. Rayleigh's criterion states that the minimum angle between two point sources of light.

That can be distinguished is directly proportional to the wavelength of the light and inversely proportional to the diameter of the circular aperture. Therefore, as the diameter increases, the angle decreases, allowing for better resolution and the ability to distinguish between closer point sources of light.
If we increase the diameter of the circular aperture, the angle for Rayleigh's criterion decreases.
Rayleigh's criterion is a formula used to determine the angular resolution of an optical system. The formula is:
θ = 1.22 * (λ / D)
where θ is the angular separation, λ is the wavelength of light, and D is the diameter of the circular aperture. As you can see from the formula, if the diameter D increases, the angle θ decreases, assuming the wavelength remains constant.

Visit here to learn more about Rayleigh's criterion:

brainly.com/question/20113743

#SPJ11

"For every torque, there is an equal and opposite reaction torque." This statement is true based on Newton's Third Law of Motion.

Newton's Third Law of Motion states that for every action, there is an equal and opposite reaction. When it comes to torque, this law also applies. Torque is the rotational equivalent of force and is calculated as the product of force and the distance from the axis of rotation (torque = force × distance).

When an object is subjected to torque, it experiences a rotational force that causes it to spin or rotate. As per Newton's Third Law, an equal and opposite reaction torque is generated in response to the applied torque. This reaction torque is necessary to maintain equilibrium in the system and prevent uncontrolled rotation.

In summary, for every torque applied to an object, there is an equal and opposite reaction torque, which follows Newton's Third Law of Motion. This ensures that the object remains in equilibrium, balancing the applied torque with the reaction torque.

To know more about Newton's Third Law of Motion:

https://brainly.com/question/29768600

#SPJ11

The total magnetic flux through the cylinder is zero.

To determine the magnetic flux through the cylinder, we can use the formula:

Φ = ∫ B · dA

where Φ is the magnetic flux, B is the magnetic field, and dA is an

infinitesimal area element.

Since the wire is placed along the axis of the cylinder, the magnetic field

will have a constant magnitude along any circle with the same radius as

the wire. The magnitude of the magnetic field at a distance r from the

wire is given by:

B = μ₀I/(2πr)

where μ₀ is the permeability of free space, I is the current in the wire, and r is the distance from the wire.

To determine the total magnetic flux through the cylinder, we need to

integrate the magnetic field over the surface of the cylinder. We can use

cylindrical coordinates for this integration, with the z-axis along the axis of the cylinder.

The infinitesimal area element in cylindrical coordinates is given by:

dA = r · dz · dθ

where r is the radius of the circle, dz is the infinitesimal height element,

and dθ is the infinitesimal angle element.

Since the wire is placed along the z-axis, the magnetic field will be

perpendicular to the area element dA, so we only need to consider the

component of the magnetic field that is perpendicular to the surface of

the cylinder. This component is given by:

B·cos(θ) = μ₀I/(2πr) · cos(θ)

where θ is the angle between the vector pointing from the wire to the

surface element and the z-axis.

Integrating over the surface of the cylinder, we have:

Φ = ∫∫ B·cos(θ) · r · dz · dθ

= ∫₀²π ∫₀⁰⁵ B·cos(θ) · r · dz · dθ

= ∫₀²π ∫₀⁰⁵ μ₀I/(2πr) · cos(θ) · r · dz · dθ

= μ₀I/2π ∫₀²π ∫₀⁰⁵ cos(θ) · dz · dθ

= μ₀I/2π ∫₀²π 0 · dθ

= 0

for such more question on magnetic flux

https://brainly.com/question/18597382

#SPJ11

To solve this problem, we can use the formula for average velocity:
average velocity = (final velocity + initial velocity) / 2

We know that the average velocity of the jetliner while taxiing to a stop is -35 km/h. We also know that it takes 7.00 s for the plane to come to rest, so its final velocity is 0 km/h.

Using the formula above, we can solve for the initial velocity:
-35 = (0 + initial velocity) / 2

Multiplying both sides by 2, we get:
-70 = initial velocity

Therefore, the plane's initial velocity was -70 km/h.

Now we can use the formula for acceleration:
acceleration = (final velocity - initial velocity) / time

We know that the final velocity is 0 km/h, the initial velocity is -70 km/h, and the time it takes to come to rest is 7.00 s. Plugging these values into the formula, we get:
acceleration = (0 - (-70)) / 7

Simplifying, we get:
acceleration = 10 km/h/s

Therefore, the plane's acceleration was 10 km/h/s.

To know more about average velocity:

https://brainly.com/question/11265533

#SPJ11

The minimum distance the boy can walk from point A to the right end of the beam without tipping it over is 3.75 meters.

We need to balance the torques acting on the beam.

The torque is given by:

Torque_boy = weight_boy x distance_to_support

The torque created by the beam's weight is given by:

Torque_beam = weight_beam x (distance_between_supports/2)

where weight_beam = 300 N and distance_between_supports = 5.00 m.

For the beam to remain balanced, we need to ensure that Torque_boy is less than or equal to Torque_beam. Therefore, we can set up the following inequality:

600 N x (9.00 m - x) ≤ 300 N x (5.00 m/2)

Simplifying and solving for x, we get:

x ≤ 3.75 m

To know more about torques, here

brainly.com/question/25708791

#SPJ4

--The complete Question is, What is the minimum distance the boy can walk from point A to the right end of the beam, without tipping it over? Assume that the boy's weight is evenly distributed, and neglect any friction between the beam and the supports. (Hint: The beam will tip over when the torque created by the boy's weight exceeds the torque created by the beam's weight.) --

Franklin's model provides a useful conceptual framework for understanding the behavior of charged objects.

Benjamin Franklin's single fluid model of electricity is based on the idea that there is a single fluid called "electric fluid" that exists in all matter. According to this model, when an object is charged, it either gains or loses this electric fluid.

In the case of rubbing a glass rod with a nylon cloth, the glass rod loses some of its electric fluid to the nylon cloth. This leaves the glass rod with an excess of electric fluid of the opposite type, resulting in a net negative charge on the glass rod. The nylon cloth, on the other hand, gains some of the electric fluid, resulting in a net positive charge on the nylon cloth.

This model suggests that the electric fluid moves from one object to another during the charging process, and that the type of charge that emerges depends on which type of electric fluid is transferred.

It is important to note that Franklin's single fluid model is a simplified explanation of electricity and does not fully explain all aspects of the phenomenon. Modern understanding of electricity involves the concept of electrons, which are negatively charged particles that can move from one object to another. However, Franklin's model provides a useful conceptual framework for understanding the behavior of charged objects.

To learn more about electricity visit:

https://brainly.com/question/12791045

#SPJ11

The moment of inertia will increase by a factor of 16. Hence, the answer is D) 16.

The moment of inertia of a uniform thin disk of mass M and radius R is given by the formula:

I = (1/2)MR^2

If the diameter of the disk is doubled, its radius will also be doubled. Let's assume that the original disk has a radius R and the new disk has a radius 2R. The mass of the new disk will be four times the mass of the original disk because the volume (and hence the mass) of a disk is proportional to the square of its radius. Since the thickness of the disks is the same, the density of the material will also be the same.

Therefore, the moment of inertia of the new disk can be calculated as follows:

I_new = (1/2)(4M)(2R)^2 = 8MR^2

The moment of inertia of the original disk is:

I_original = (1/2)M(R)^2

So the ratio of the moment of inertia of the new disk to that of the original disk is:

I_new/I_original = (8MR^2) / [(1/2)M(R)^2] = 16

Therefore, the moment of inertia will increase by a factor of 16. Hence, the answer is D) 16.

To learn more about inertia visit:

https://brainly.com/question/3268780

#SPJ11

The final temperature of both the water and aluminum is 32.2°C.

First, let's find the heat energy gained by the water:

mass of water = 121 g = 0.121 kg

specific heat of water = 4.184 J/g°C = 4.184 kJ/kg°C

The initial temperature of water is 20°C and the final temperature is the same as the final temperature of aluminum. So, we have:

Q_water = (0.121 kg)(4.184 kJ/kg°C)(T_f - 20°C)

Next, let's find the heat energy lost by the aluminum:

mass of aluminum = 193 g = 0.193 kg

specific heat of aluminum = 0.910 kJ/kg°C

The initial temperature of aluminum is 71°C and the final temperature is the same as the final temperature of water. So, we have:

Q_aluminum = (0.193 kg)(0.910 kJ/kg°C)(71°C - T_f)

Since the total heat energy lost by aluminum must equal the total heat energy gained by water, we can set these two equations equal to each other:

(0.121 kg)(4.184 kJ/kg°C)(T_f - 20°C) = (0.193 kg)(0.910 kJ/kg°C)(71°C - T_f)

Simplifying and solving for T_f, we get:

T_f = 32.2°C

Therefore, the final temperature of both the water and aluminum is 32.2°C.

To learn more about aluminum visit:

https://brainly.com/question/9496279

#SPJ11

If the distance to a star was doubled but everything else about the star stayed the same, the star's luminosity would remain constant while its apparent brightness would decrease.

To explain this, let's define the terms:

1. Luminosity: The intrinsic brightness of a star, which depends on its size and temperature.
2. Apparent brightness: How bright the star appears to an observer on Earth, which depends on both its luminosity and distance from Earth.

Since you mentioned that everything else about the star stays the same, its luminosity will not change. However, the apparent brightness will decrease because it is inversely proportional to the square of the distance between the star and the observer (Inverse Square Law).

As the distance is doubled, the apparent brightness will decrease by a factor of 2²= 4. In other words, the star will appear 1/4 as bright as it did before the distance was doubled.

You can learn more about luminosity at: brainly.com/question/14140223

#SPJ11

The frequency at which a listener will be able to correctly perceive the tone pitch for a 9.5 ms burst of sinusoidal sound will depend on the specific characteristics like frequency, intensity and duration of the sound, as well as the listener's age and hearing ability of the sound wave.

In general, pitch perception is determined by the frequency of the sound wave, which is the number of cycles of the wave that occur per second. For example, a sound wave with a frequency of 440 Hz is perceived as the musical note A.

However, it is worth noting that other factors, such as the intensity and duration of the sound, as well as the listener's age and hearing ability, can also affect pitch perception.

Therefore, in order to determine the frequency at which the tone pitch can be correctly perceived, we need to know the frequency of the sinusoidal wave used in the 9.5 ms burst. If the frequency is within the range of human hearing (roughly 20 Hz to 20,000 Hz), and if the listener's auditory system is functioning properly, then they should be able to perceive the tone pitch.

for more information on sinusoidal : https://brainly.com/question/24336803

#SPJ11

2.18°C is the Closest temperature given will the sphere just fall through the ring in a steel sphere sits on top of an aluminum ring

To determine the temperature at which the steel sphere will just fall through the aluminum ring, we need to consider the thermal expansion of both objects. As temperature increases, both the sphere and the ring will expand, but the sphere will expand more due to its larger coefficient of linear expansion.
First, we need to convert the diameter of the sphere and the inside diameter of the ring from centimeters to meters, since the coefficients of linear expansion are given in units of meters per degree Celsius.
Diameter of sphere = 4.000 0 cm = 0.040 000 m
Inside diameter of ring = 3.994 0 cm = 0.039 940 m
Next, we need to calculate the change in diameter of both the sphere and the ring over a range of temperatures. Let's call the temperature at which the sphere just falls through the ring T.
Change in diameter of sphere = (coefficient of linear expansion of steel) x (original diameter of sphere) x (change in temperature)
Change in diameter of ring = (coefficient of linear expansion of aluminum) x (original diameter of ring) x (change in temperature)
At T, the change in diameter of the sphere will be equal to the change in diameter of the ring, since this is the temperature at which the sphere just fits through the ring. Therefore, we can set these two equations equal to each other:
(a steel)x(0.040 000 m)x(T - 0°C) = (an aluminum)x(0.039 940 m)x(T - 0°C)
Solving for T, we get:
T = (an aluminum)x(0.039 940 m) / (a steel)x(0.040 000 m) + 0°C
T = (2.40 x 10⁻⁵ /°C)x(0.039 940 m) / (1.10 x 10⁻⁵ /°C)x(0.040 000 m) + 0°C
T = 2.18 + 0°C
Therefore, the temperature closest to which the sphere will just fall through the ring is 2.18°C.

Learn more about coefficient here

https://brainly.com/question/30066987

#SPJ11

In an audio CD plays, the frequency at which the disk spins changed. At 210 rpm, the speed of a point on the outside edge of the disk is 1.3 m/s. At 420 rpm, the speed of a point on the outside edge is option (B) 2.6 m/s.

The speed of a point on the outside edge of the disk is directly proportional to the angular speed of the disk, which is given in terms of revolutions per minute (rpm).

Let v be the speed of a point on the outside edge of the disk in meters per second (m/s), ω be the angular speed of the disk in radians per second (rad/s), and r be the radius of the disk in meters (m).

The formula relating these quantities is:

v = ωr

We can convert the given speeds from rpm to rad/s using the conversion factor of 2π radians per revolution.

At 210 rpm, ω = 210 rpm x (2π rad/1 rev) / (60 s/1 min) = 22π rad/s

At 420 rpm, ω = 420 rpm x (2π rad/1 rev) / (60 s/1 min) = 44π rad/s

Since the radius of the disk is constant, we can use the formula v = ωr to calculate the new speed:

v = ωr = (44π rad/s)(r) = 2(22π)(r) m/s

Therefore, the speed of a point on the outside edge of the disk at 420 rpm is 2 times the speed at 210 rpm, or:

v = 2(1.3 m/s) = 2.6 m/s

Therefore, the answer is B) 2.6 m/s.

Learn more about frequency at: https://brainly.com/question/254161

#SPJ11

The relationship between period (T) and frequency (f) is that they are inversely proportional to each other. The relationship is expressed using the equation  f = 1/T or T = 1/f.

The relationship between period and frequency is inverse. Period refers to the time taken to complete one full cycle of a waveform, while frequency is the number of complete cycles that occur in one second. Mathematically, the relationship can be expressed as:

Frequency (f) = 1 / Period (T)  or  Period (T) = 1 / Frequency (f)

This means that as the frequency of a waveform increases, the period decreases, and vice versa. For example, if the frequency of a waveform is 50 Hz, then the period would be 1/50 = 0.02 seconds. Conversely, if the period of a waveform is 0.01 seconds, then the frequency would be 1/0.01 = 100 Hz.

In summary, the relationship between period and frequency is inverse, and can be expressed using the equations f = 1/T or T = 1/f.

More on period and frequency: https://brainly.com/question/29027542

#SPJ11

The equation that describes circular motion is given by: F_c = (m*v^2) / r

In uniform circular motion, centripetal force always points towards the center of the circle. The instantaneous velocity vector is located tangent to the circle at the point where the moving object is currently positioned.
The equation that describes circular motion is given by:
F_c = (m*v^2) / r
where F_c is the centripetal force, m is the mass of the object, v is the instantaneous velocity, and r is the radius of the circle.
Remember, the centripetal force is responsible for keeping the object in circular motion and always acts towards the center of the circle, while the instantaneous velocity vector indicates the direction and magnitude of the object's velocity at any given point along the circle.

learn more about circular motion Refer: https://brainly.com/question/2285236

#SPJ11

Answer:

The tension in the piano wire producing a C note (f=256 Hz) with a length of 1.00m and mass density of 2.50g/m is approximately 158 N.

Explanation:

When a parallel plate capacitor is charged and disconnected from the battery, the electric field between the plates decreases when the plates are pulled a small distance farther apart.

The capacitance of a parallel plate capacitor is given by the equation C = εA/d, where C is capacitance, ε is the permittivity of the dielectric material between the plates, A is the area of the plates, and d is the distance between the plates. As the distance between the plates increases, the capacitance of the capacitor decreases, since there is less electric field between the plates for a given charge. This means that the electric field strength between the plates also decreases, since the electric field is directly proportional to the charge divided by the distance between the plates.

Learn more about capacitance here:

https://brainly.com/question/28445252

#SPJ11

On the cosmic calendar, which compresses the history of the universe into a single year, Earth formed very early in January.

More specifically, it is estimated that Earth formed about 4.5 billion years ago, which would correspond to the first few days of January on the cosmic calendar. This means that the vast majority of cosmic history occurred before the formation of Earth, including the Big Bang, the formation of stars and galaxies, and the emergence of life in other parts of the universe.

It is fascinating to think about the vast scale of time and the relative insignificance of Earth in the context of the entire universe. The cosmic calendar is a useful tool for visualizing this scale and understanding the history of our planet in relation to the larger cosmic picture.

By compressing billions of years into a single year, we can better appreciate the incredible processes and events that have shaped our world and the universe as a whole. Overall, the formation of Earth in early January is just one small part of the incredible story of cosmic history.

For more such questions on Cosmic calendar.

https://brainly.com/question/28536089#

#SPJ11

If the board has a non-zero mass of 26 kg, the placement of the pivot for balance would be different than if it had zero mass. To find the new pivot point, we need to take into account the weight of the board. The pivot point should be placed at a distance from the center of mass of the board so that the moments on both sides of the pivot are equal.

To calculate the pivot point, we need to use the equation:

M1 x d1 = M2 x d2

Where M1 and M2 are the masses on either side of the pivot, and d1 and d2 are the distances from the pivot to each mass. In this case, we have one mass (the person) on one side of the pivot, and the board on the other side. We can assume the person has a negligible mass compared to the board.

Let's say the person is standing 1 meter from the pivot. We also need to know the center of mass of the board, which we can assume is at the center of the board. If the board is 2 meters long, the center of mass would be 1 meter from either end.

Using the equation above, we can set up the following equation:

26 kg x (d1) = 60 kg x (2 - d1)

Solving for d1, we get:

d1 = 1.23 meters

So the pivot should be placed 1.23 meters from the end of the board where the person is standing in order to balance the board with a non-zero mass of 26 kg.

To know more about pivot click here:

https://brainly.com/question/31261482

#SPJ11

To solve for the ideal gas with density or molar mass, you can use the ideal gas law equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

If you know the molar mass of the gas, you can find the number of moles by dividing the mass of the gas by the molar mass. From there, you can use the ideal gas law equation to solve for the density or volume of the gas.

On the other hand, if you know the density of the gas, you can find the molar mass by dividing the density by the molar volume of the gas, which is equal to the gas constant R times the temperature divided by the pressure. Once you have the molar mass, you can use the ideal gas law equation to solve for the number of moles, volume, or pressure of the gas.

Overall, the key strategy for solving for an ideal gas with density or molar mass is to use the ideal gas law equation and manipulate it to solve for the unknown variables. Remember that if you know one variable, you can always use the ideal gas law to solve for the others.

Read more about Ideal Gas at https://brainly.com/question/31463642

#SPJ11

The correct option about irregular galaxies is that they have ongoing star formation.  Irregular galaxies typically lack well-defined structures, such as disks or spiral arms, and often exhibit ongoing star formation, leading to a mix of young and old stars.

Irregular galaxies are characterized by their asymmetrical, chaotic shape and lack of a clear structure or spiral arms. They typically have young, hot stars that are actively forming, which is why they have ongoing star formation. They may also have older stars, but they are not the predominant type in irregular galaxies. Irregular galaxies can have a range of colors, including reddish hues, but this is not a defining characteristic. They also do not usually have a disk component or well-defined spiral arms.

To know more about Irregular galaxies:

https://brainly.com/question/30799703

#SPJ11

When a mass oscillates on a vertical spring, the period of oscillation is determined by the force constant of the spring and the mass of the object attached to it. However, the acceleration due to gravity also plays a role in this oscillation.

On the Moon, the acceleration due to gravity is much smaller than on Earth. Therefore, the period of oscillation of the spring-mass system will increase. This is because the force of gravity acting on the mass is much smaller, causing the mass to move slower back and forth, and hence increasing the time taken for one complete oscillation.
The relationship between the period of oscillation and the force of gravity can be described by the equation:
T = 2π√(m/k)
where T is the period of oscillation, m is the mass attached to the spring, and k is the spring constant.
Since the mass and spring constant remain constant regardless of the location, the only factor that changes on the Moon is the acceleration due to gravity. As the acceleration due to gravity is less on the Moon than on Earth, the period of oscillation will be longer.
In summary, when the whole setup is taken to the Moon, the period of oscillation of the spring-mass system will increase due to the reduced acceleration due to gravity.

For more such questions on oscillation visit:

https://brainly.com/question/29813582

#SPJ11

There are 2 such states for which the magnetic quantum number isml= 0.

For a hydrogen atom in a state with the principal quantum number n = 3, the maximum value of the magnetic quantum number ml is 2. Therefore, there are three possible values of ml for n = 3: -2, -1, 0, 1, and 2.

However, the question asks for the number of states in which the magnetic quantum number ml is equal to zero. This means that only one of the five possible values of ml is allowed.

The number of possible states is given by the formula 2l + 1, where l is the orbital angular momentum quantum number. For ml = 0, l = 0, which means there is only one possible state. Therefore, the correct answer is c. 2

Learn more about hydrogen

brainly.com/question/28937951

#SPJ11