The pH of a solution is defined as the negative logarithm to the base 10 of the value of the hydronium ion concentration in moles per litre. If the pH is less than 7, then it is acidic and if it is greater than 7, then it will be basic.
1 cm³ = 0.001 L
a) Moles of HCl = 0.144 M × 0.025 L = 3.6 × 10⁻³
Moles of NaOH = 0.125 × 0.025 = 3.125 × 10⁻³
The balanced chemical equation is:
HCl + NaOH → NaCl + H₂O
Moles of HCl remain unreacted is:
3.6 × 10⁻³ - 3.125 × 10⁻³ = 4.75 × 10⁻⁴
Molar concentration of HCl = 4.75 × 10⁻⁴ / 0.05 = 9.5 × 10⁻³ M
pH = - log [9.5 × 10⁻³] = 2.02
b) Moles of HCl = 0.00375
Moles of NaOH = 0.00525
Moles of NaOH remain unreacted is:
0.00525 - 0.00375 = 0.0015
Molar concentration of NaOH = 0.0015 / 0.025 = 0.06 M
pOH = - log [OH⁻] = -log [ 0.06] = 1.22
pH = 14 - 1.22 = 12.78
[H₃O⁺] = 10⁻pH = 1.65 × 10⁻¹³
c) Moles of HCl = 0.22 × 0.0212 = 0.0046
Moles of NaOH = 0.30 × 0.01 = 0.003
Moles of HCl remain unreacted is:
0.0046 - 0.003 = 0.0016
Molar concentration of HCl = 0.0016 / 0.0312 = 0.0512
pH = - log [0.0512] =1.290
To know more about pH, visit;
https://brainly.com/question/31447199
#SPJ4
What is the theoretical yield of H2O that can be obtained from the reaction of 4.5 g H2
and excess O2?
2H2(g) + O2(g) = 2H2O(g)
A) 4.5 g B) 9.0 g C) 40. g D) 80. g E) 81 g
The theoretical yield of H2O that can be obtained from the reaction of 4.5 g H2 and excess O2 is 40. g. The correct answer is option C.
The theoretical yield of H2O that can be obtained from the reaction of 4.5 g H2 and excess O2 can be calculated using stoichiometry. From the balanced equation, we can see that for every 2 moles of H2 that react with 1 mole of O2, 2 moles of H2O are produced. This means that the mole ratio of H2O to H2 is 2:1.
First, we need to convert the mass of H2 to moles using its molar mass:
4.5 g H2 x (1 mol H2 / 2.02 g H2) = 2.23 mol H2
Since the O2 is in excess, it won't be completely consumed and doesn't affect the calculation of theoretical yield. Now, we can use the mole ratio to calculate the theoretical yield of H2O:
2.23 mol H2 x (2 mol H2O / 2 mol H2) x (18.02 g H2O / 1 mol H2O) = 40.4 g H2O
Therefore, from the reaction of 4.5 g H2 and excess O2 , the theoretical yield of H2O that can be obtained is 40. g.
So, option C is correct.
For more such questions on theoretical yield, click on:
https://brainly.com/question/25996347
#SPJ11
Xenon is a noble gas that is capable of forming compounds. One of these compounds is XeBr₂Cl₂. Is the molecule polar?
The molecule XeBr₂Cl₂, which is a compound formed by the noble gas Xenon, is polar or not.
The molecule XeBr₂Cl₂ is polar.
1. Determine the molecule's geometry. XeBr₂Cl₂ has a total of 4 atoms bonded to the central Xenon (Xe) atom. Considering the 4 bonded atoms and the lone pair of electrons on Xenon, the molecule has a trigonal bipyramidal geometry.
2. Identify the electronegativity of each atom. Bromine (Br) and Chlorine (Cl) have different electronegativities.
3. Assess the polarity of individual bonds. Due to the difference in electronegativity between Bromine and Chlorine, the Xe-Br and Xe-Cl bonds are polar.
4. Evaluate the overall polarity. Since the molecule is not symmetrical and the individual bonds are polar, XeBr₂Cl₂ is a polar molecule.
To know more about molecule's geometry :
https://brainly.com/question/29254782
#SPJ11
Salt is added to water until no more can be dissolved. This is a kind of(blank) solution.
a) Saturated.
b) Unsaturated.
c) Diluted.
d) Insoluble.
Answer:
The correct answer is:
a) Saturated.
When salt is added to water until no more salt can be dissolved, it forms a saturated solution. A saturated solution is a solution in which the maximum amount of solute has been dissolved at a given temperature and pressure, and no more solute can dissolve. It is in a state of dynamic equilibrium, with solute particles constantly dissolving and precipitating at the same rate.
what is the mass of 2.13 x 10^18 atoms of Li?
The mass of 2.13 x 10^18 atoms of Li is approximately 2.46 x 10^-4 grams.
How to calculate the mass of given number of atoms of an element?
To find the mass of 2.13 x 10^18 atoms of Li (lithium), we will use the following steps:
Step 1: Find the molar mass of lithium (Li). The molar mass of lithium is approximately 6.94 g/mol.
Step 2: Calculate the number of moles using Avogadro's number (6.022 x 10^23 atoms/mol). To do this, divide the given number of atoms (2.13 x 10^18) by Avogadro's number:
Number of moles = (2.13 x 10^18 atoms) / (6.022 x 10^23 atoms/mol) = 3.54 x 10^-6 moles
Step 3: Multiply the number of moles by the molar mass to find the mass of Li:
Mass of Li = (3.54 x 10^-6 moles) x (6.94 g/mol) = 0.0246 g
So, the mass of 2.13 x 10^18 atoms of Li is approximately 0.0246 grams.
To know more about Stoichiometry Calculations:
https://brainly.com/question/30663356
#SPJ11
ch 11.which substance has dipole-dipole forces?
a. CCl4
b. NF3
c.CS2
d. SO3
SO[tex]_3[/tex] has dipole-dipole forces. Dipole-dipole interactions are the electrostatic interactions that occur between permanent polar molecules. Therefore, the correct option is option D.
Dipole-dipole forces and dipole-dipole interactions are the electrostatic interactions that occur between permanent polar molecules. Typically, the positive end of one molecule will draw the negative side of another. As a result, the two molecules get closer to one another, boosting the stability of the material. This interaction is not an ordinary ionic or covalent connection because it involves no transfer as well as exchange of electrons. SO[tex]_3[/tex] has dipole-dipole forces.
Therefore, the correct option is option D.
To know more about dipole-dipole forces, here:
https://brainly.com/question/30583108
#SPJ4
Identify general features of a nickel-metal hydride battery. Select all that apply.These batteries are commonly found in power tools.The anode reaction is the oxidation of hydrogen atoms absorbed within a metal alloy.The cathode reaction is the reduction of nickel(III) to nickel(II).
A nickel-metal hydride battery has the following general features: it is commonly found in power tools, the anode reaction involves the oxidation of hydrogen atoms absorbed within a metal alloy, and the cathode reaction is the reduction of nickel(III) to nickel(II).
The general features of a nickel-metal hydride battery include:
1. Common usage in power tools: Nickel-metal hydride batteries are often used in power tools due to their high energy density and ability to handle high discharge rates.
2. Anode reaction: The anode reaction in a nickel-metal hydride battery involves the oxidation of hydrogen atoms absorbed within a metal alloy. This process releases electrons, which then flow through the external circuit, providing power to the device.
3. Cathode reaction: The cathode reaction in a nickel-metal hydride battery is the reduction of nickel(III) to nickel(II). This occurs as the electrons return to the battery through the external circuit and combine with the nickel(III) ions at the cathode, reducing them to nickel(II) ions.
Learn more about reduction : https://brainly.com/question/13892498
#SPJ11
Determine the empirical formula of the compound with a crystal structure where copper ions occupy one‑half of the tetrahedral holes in a cubic close‑packed (ccp) array of chlorine anions.
The ratio of copper ions to chlorine anions in the unit cell is 4:4, which can be simplified to 1:1. Therefore, the empirical formula of the compound is CuCl.
Step 1: Identify the number of atoms in the ccp array
In a cubic close-packed array of anions (chlorine in this case), there are 4 anion atoms present per unit cell.
Step 2: Determine the number of tetrahedral holes in the ccp array
There are two tetrahedral holes per anion in a ccp structure. So, for 4 anion atoms, there will be 4 * 2 = 8 tetrahedral holes.
Step 3: Calculate the number of occupied tetrahedral holes by copper ions
As copper ions occupy one-half of the tetrahedral holes, the number of occupied holes will be 8 * 0.5 = 4 copper ions.
Step 4: Determine the empirical formula of the compound
The ratio of copper ions to chlorine anions in the unit cell is 4:4, which can be simplified to 1:1. Therefore, the empirical formula of the compound is CuCl.
To know more about anions refer here:
https://brainly.com/question/20781422#
#SPJ11
In redox reactions how do ^G values and reduction potential relate?
In redox reactions, the [tex]^G[/tex] (change in Gibbs free energy) value can be related to the reduction potential [tex](E^o)[/tex] through the following equation:
[tex]^G = -nFE^o[/tex]
where n is the number of electrons transferred, F is the Faraday constant, and [tex]E^o[/tex] is the standard reduction potential.
The reduction potential is a measure of the tendency of a species to undergo reduction (gain of electrons). More specifically, it is the tendency of a half-reaction to occur as a reduction half-reaction, as compared to a standard hydrogen electrode (SHE) under standard conditions. The reduction potential is usually reported in volts (V).
The sign of the [tex]^G[/tex] value and the reduction potential are related. If the [tex]^G[/tex] value is negative, the reaction is spontaneous, and the reduction potential will be positive. Conversely, if the [tex]^G[/tex] value is positive, the reaction is non-spontaneous, and the reduction potential will be negative.
In summary, the [tex]^G[/tex] values and the reduction potentials are related through the equation [tex]^G = -nFE^o.[/tex]The sign of the [tex]^G[/tex] value and the reduction potential are related, where a negative [tex]^G[/tex] value corresponds to a positive reduction potential, indicating a spontaneous reaction, and vice versa.
Learn more about reduction potential.
https://brainly.com/question/23881200
#SPJ4
When water is hydrolyzed in the presence of NaCl, the possible half-cell equations are given in the accompanying table. Experimentally, it is found that H2 (g) and Cl2 (g) are formed, while O2 (g) and Na (s) are not. What is the best explanation for this?
The formation of H2 (g) and Cl2 (g) during hydrolysis in the presence of NaCl is due to the difference in reduction potentials of the half-cell equations and the selective reduction and oxidation of the ions present in the solution.
The best explanation for the formation of H2 (g) and Cl2 (g) during the hydrolysis of water in the presence of NaCl lies in the standard reduction potentials of the half-cell equations given in the accompanying table.
It can be observed that the reduction potential of Cl2 is much higher than that of O2, and the reduction potential of H2 is much lower than that of Na. This means that Cl2 has a stronger tendency to be reduced than O2, and H2 has a weaker tendency to be oxidized than Na.
During hydrolysis, the water molecule is split into H+ and OH- ions. The H+ ions are reduced by the Cl- ions to form HCl, which then reacts with more H+ ions to form H2 gas.
The OH- ions are oxidized by water molecules to form O2 gas and more OH- ions. The Na+ ions, however, have a higher tendency to be oxidized than the water molecule, so they do not participate in the reaction.
To know more about hydrolysis refer here:
https://brainly.com/question/29439050#
#SPJ11
ch 13 the reaction X--> products is second order in X and has a rate constant of .035. if a reaction mixture is initially .45M in X, what is the concentration of X after 155 seconds?
a. 7.6
b. 2.00 x 10^-3
c. .13
d. 0.00
The concentration of X after 155 seconds is 7.6 x 10⁻³ M. The answer is a.
To solve this problem, we can use the second-order rate law, which is given by the equation:
1/[X]t - 1/[X]0 = kt
Where [X]t is the concentration of X at time t, [X]0 is the initial concentration of X, k is the rate constant, and t is the time elapsed.
Substituting the given values into the equation, we get:
1/[X]155 - 1/0.45 = (0.035 M⁻¹s⁻¹) x (155 s)
Solving for [X]155, we get:
[X]155 = 7.6 x 10⁻³ M
Therefore, the concentration of X is 7.6 x 10⁻³ M, which is option A.
To know more about concentration, refer here:
https://brainly.com/question/30862330#
#SPJ11
explain the loss of absorbance when you add the glycine buffer before the sulfanilic acid and the sodium nitrite. answer in at least three to four complete, active voice sentences.
The loss of absorbance observed when adding the glycine buffer before the sulfanilic acid and sodium nitrite in a spectrophotometric assay is due to the neutralization of any acidic or basic components that could interfere with the reaction.
Here are some possible additional explanations in bullet points:
The glycine buffer is added to adjust the pH to a suitable range for the reaction to take place, typically around 1-3 pH units. This helps to ensure that the reaction occurs optimally and that the results obtained are accurate and reliable.The addition of the glycine buffer can also help to stabilize the reaction mixture and prevent any chemical or physical changes that could affect the assay's performance. This is particularly important if the reaction is sensitive to environmental factors, such as temperature or humidity.The loss of absorbance that occurs after adding the glycine buffer is typically minimal and should not significantly affect the overall performance of the assay. However, it is essential to monitor and record any changes in absorbance or other parameters to ensure that the assay is working correctly and producing consistent results.Learn More About glycine
https://brainly.com/question/14886525
#SPJ11
What is the formula weight of PbSO4?If you have 31.3 g of PbSO4, how many moles of this compound do you have? If you have 0.2275 mol of PbSO4, how mnay grams of this compound do you have?
You have 0.1032 mol of PbSO4 in 31.3 g, and 68.96 g of PbSO4 in 0.2275 mol.
The formula weight of PbSO4 is calculated by adding the atomic weights of its constituent elements: Pb (207.2 g/mol), S (32.07 g/mol), and O (16.00 g/mol x 4).
Formula weight = 207.2 + 32.07 + (16.00 x 4) = 303.27 g/mol
To find the moles of PbSO4 in 31.3 g, use the formula:
moles = mass / formula weight
moles = 31.3 g / 303.27 g/mol = 0.1032 mol
To find the grams of PbSO4 in 0.2275 mol, use the formula:
mass = moles x formula weight
mass = 0.2275 mol x 303.27 g/mol = 68.96 g
So, you have 0.1032 mol of PbSO4 in 31.3 g, and 68.96 g of PbSO4 in 0.2275 mol.
To learn more about mass, refer below:
https://brainly.com/question/18064917
#SPJ11
If ΔGo for a reaction is equal to 0, what must be true regarding the equilibrium constant?
If ΔGo for a reaction is equal to 0, then the reaction is in equilibrium and the equilibrium constant (K) must be equal to 1.
What happens when ΔGo is zero?
Hi, if ΔGo for a reaction is equal to 0, the equilibrium constant (K) for the reaction must be equal to 1. This means that the rate of the forward reaction is equal to the rate of the reverse reaction, resulting in no net change in the concentrations of the reactants and products over time.
This is because the relationship between ΔGo and K is given by the equation:
ΔGo = -RT ln(K)
Where:
ΔGo = standard Gibbs free energy change
R = gas constant (8.314 J/mol·K)
T = temperature in Kelvin
ln(K) = natural logarithm of the equilibrium constant
When ΔGo is equal to 0, the equation becomes:
0 = -RT ln(K)
To solve for K, we can rearrange the equation:
ln(K) = 0
Taking the inverse natural logarithm (exponential) of both sides:
K = e^0
Since e^0 is equal to 1, K must be equal to 1. This means that the reaction is at equilibrium, with the concentrations of reactants and products remaining constant over time.
To know more about Equilibrium:
https://brainly.com/question/10748320
#SPJ11
37) Give the structure for lithium hypochlorite.A) LiClOB) LiClO2C) LiClO3D) LiClO4E) Li2ClO
The correct structure for lithium hypochlorite is A) LiClO. Lithium hypochlorite is an ionic compound composed of the Li⁺ cation and the ClO⁻ hypochlorite anion.
The ClO⁻ anion is formed by the combination of a Cl⁻ anion (chloride ion) and an O²⁻ anion (oxide ion), with one additional electron transferred from Cl to O.
The formula for lithium hypochlorite is LiClO, indicating that there is one Li⁺ cation and one ClO⁻ hypochlorite anion in the formula unit.
The structure of LiClO can be represented as follows:
O
│
Li ── Cl
where the Li⁺ ion is bonded to the ClO⁻ hypochlorite anion via ionic bonds. The ClO⁻ hypochlorite anion has a bent molecular geometry, with the Cl-O bond angle slightly less than 120° due to the lone pair on the O atom
learn more about Lithium hypochlorite here:
https://brainly.com/question/15721856?utm_source=android&utm_medium=share&utm_campaign=question
#SPJ11
What type of weapon delivery is used with the B61 weapon?
The type of the weapon delivery is used with the B61 weapon is Ballistic missile.
The B61 nuclear bomb is the variable yield dual which is use the tactical and the strategic bomb equipped with the Full Fuzing Option that is FUFO and it designed for the external carriage by the high-speed aircraft.
The Ballistic missile is the missiles that is use in the ballistic trajectory normally in the deliver the warhead over the horizon, and at the distances of the thousands of the kilometers, that is in the case of the "intercontinental ballistic missiles" and the "submarine-launched ballistic missiles".
To learn more about weapons here
https://brainly.com/question/30151221
#SPJ4
the process of removing sulfur from gases emitted from power plants that burn coal is called . a) desalination b) scrubbing c) cogeneration d) fission e) energy conservation
The correct answer is (b) scrubbing.
The process of removing sulfur from gases emitted from power plants that burn coal is called scrubbing.
The process of removing sulfur from gases emitted from power plants that burn coal is called ""scrubbing."" Coal is a fossil fuel that contains sulfur compounds, which, when burned, can produce sulfur dioxide (SO2) emissions. These emissions can have negative environmental impacts, such as contributing to acid rain and smog formation.
Scrubbing is a method used to remove these sulfur compounds from the exhaust gases produced by burning coal. The process involves passing the exhaust gases through a chemical solution that reacts with the sulfur compounds, converting them into a solid or liquid form that can be removed from the gas stream.
The most common type of scrubbing used in coal-fired power plants is called ""wet scrubbing."" In wet scrubbing, the exhaust gases are passed through a liquid solution, typically made up of water and a chemical reagent such as limestone or lime. The sulfur compounds react with the reagent, forming solid or liquid byproducts that can be removed from the gas stream.
Click the below link, to learn more about Scrubbing of coal:
https://brainly.com/question/30042938
#SPJ11"
what is the geometry of the hexafluoroalimunate ion (AlF6)^-3?
a) octahedral
b) tetrahedral
c) trigonal bipyramidal
d) hexagonal
The geometry of the hexafluoroaluminate ion (AlF6)^-3 is octahedral. The correct answer is option a.
In this ion, an aluminum (Al) atom is surrounded by six fluoride (F) atoms. The octahedral geometry is a result of the aluminum atom's coordination with six fluoride ions, which distribute themselves symmetrically around the aluminum atom.
In an octahedral arrangement, the central atom forms six bonding pairs with its surrounding ligands, creating six bond angles of 90 degrees between adjacent fluoride atoms. The octahedral shape maximizes the distance between the fluoride ions, minimizing electron repulsion and stabilizing the overall structure of the ion.
This arrangement is distinct from other geometries such as tetrahedral (option b), trigonal bipyramidal (option c), and hexagonal (option d), which involve different numbers of bond pairs and bond angles. The octahedral geometry is a common structure for metal coordination complexes and provides insights into the electronic properties and reactivity of the hexafluoroaluminate ion.
Therefore, option a is correct.
For more such questions on geometry, click on:
https://brainly.com/question/29650255
#SPJ11
The molar solubility of Ag2S is 1.26 × 10-16 M in pure water. Calculate the Ksp for Ag2S.a) 6.81 × 10-63b) 1.59 × 10-32c) 3.78 × 10-12d) 1.12 × 10-8e) 8.00 × 10-48
The Ksp for Ag2S is 6.81 × 10-63, which corresponds to option a).
To calculate the Ksp for Ag2S given its molar solubility, we need to follow these steps:
1. Write the balanced chemical equation for the dissolution of Ag2S:
Ag2S (s) ⇌ 2Ag+ (aq) + S2- (aq)
2. Use the molar solubility (1.26 × 10-16 M) to determine the concentration of each ion at equilibrium:
[Ag+] = 2 × (1.26 × 10-16 M) = 2.52 × 10-16 M
[S2-] = 1.26 × 10-16 M
3. Write the expression for the Ksp of Ag2S:
Ksp = [Ag+]^2 × [S2-]
4. Substitute the equilibrium concentrations into the Ksp expression:
Ksp = (2.52 × 10-16)^2 × (1.26 × 10-16)
5. Calculate the Ksp:
Ksp = 6.81 × 10-63
So, the Ksp for Ag2S is 6.81 × 10-63.
To know more about molar solubility click here:
https://brainly.com/question/28170449
#SPJ11
For each reaction in Model 2, predict the number of electrons that must be involved int he reaction to make the charged in the reaction balance.
For each reaction in Model 2, predict the number of electrons that must be involved in the reaction to make the charges in the reaction balance. Two electrons are required to balance the +2 charge on the reactant's side of the equation.
What is reaction balance?Reaction balance refers to the balancing of the number of reactant and product species in a chemical reaction, such that the total charge and total mass are conserved. This is achieved by adjusting the stoichiometric coefficients of each species in the chemical equation. In addition to balancing the mass of the species, it is also important to balance the charge in the reaction.
Learn more about electrons
https://brainly.com/question/1255220
#SPJ4
a common error in this experiment occurs when the magnesium wire is not sufficiently tied to the copper wire and it breaks free from the bottom of the buret. this results in the magnesium not completely reacting with the acid. explain how this error effects the final calculated molar mass of magnesium.
It is crucial to ensure that the magnesium wire is securely tied to the copper wire to avoid this error and ensure accurate results in the calculation of the molar mass of magnesium.
The common error in this experiment, where the magnesium wire breaks free from the bottom of the buret, can have a significant impact on the final calculated molar mass of magnesium.
This is because the magnesium wire not reacting completely with the acid means that the amount of magnesium consumed is not accurate, which leads to an incorrect value for the molar mass of magnesium.
When the magnesium wire breaks free, it stops reacting with the acid prematurely, resulting in a reduced amount of magnesium being consumed. This means that the calculated molar mass of magnesium will be higher than its actual value, as there is less magnesium consumed than there should be.
To know more about magnesium wire refer here:
https://brainly.com/question/19223717#
#SPJ11
Catalysts increase reaction rates by _____A) increasing the activation energy.B) increasing the enthalpy of reaction.C) decreasing the enthalpy of reaction.D) providing an alternate reaction mechanism with a lower activation energy.E) changing the value of the equilibrium constant.
Catalysts increase reaction rates by D) providing an alternate reaction mechanism with a lower activation energy.
Catalysts are materials that can quicken chemical reactions without consuming themselves. To achieve this, they offer a different reaction route with a lower activation energy, enabling more reactant molecules to obtain the required energy for the reaction to occur.
Reduced activation energy makes it simpler for reactant molecules to cross the energy barrier and create products. Activation energy is the amount of energy needed for a reaction to take place. Both the enthalpy of a reaction, which is a measure of the heat absorbed or released during a reaction, and the equilibrium constant of a reaction, which is a gauge of how far a reaction has progressed, are unaffected by catalysts.
To know more about the catalysts refer here :
https://brainly.com/question/24430084#
#SPJ11
which of the following should have the highest surface tension at a given temperature? group of answer choices carbon tetrachloride methane carbon tetrafluoride carbon tetrabromide carbon tetraiodide
Carbon tetrachloride should have the highest surface tension at a given temperature. Surface tension is a measure of the force required to stretch or break the surface of a liquid. It is dependent on the intermolecular forces between the molecules of the liquid.
The greater the strength of these intermolecular forces, the higher the surface tension.
Carbon tetrachloride has four chlorine atoms, which are highly electronegative and hence, can form strong dipole-dipole interactions with neighboring molecules. These intermolecular forces result in a strong cohesive force between the molecules of carbon tetrachloride, leading to higher surface tension.
In contrast, methane has weak van der Waals forces between its molecules, which result in lower surface tension. Carbon tetrafluoride, carbon tetrabromide, and carbon tetraiodide also have weaker intermolecular forces than carbon tetrachloride, which leads to lower surface tension values.
Therefore, among the given options, carbon tetrachloride should have the highest surface tension at a given temperature.
To know more about carbon tetrachloride refer here:
https://brainly.com/question/23871944#
#SPJ11
Can an optically inactive compound rotate plane-polarized light?
No, an optically inactive compound cannot rotate plane-polarized light.
A compound's capacity to rotate the plane of plane-polarized light is known as optical activity. This happens as a result of the compound's chiral core, which means that its mirror image cannot be superimposed. Enantiomers are the mirror images of chiral compounds that rotate plane-polarized light in opposing directions. The type of chemical and the light's wavelength affect how much spinning occurs.
A compound that is optically inactive, on the other hand, either lacks a chiral center or has an equal number of chiral centers with opposing configurations, making it possible to superimpose the molecule with its mirror copy. Optically inert substances do not spin plane-polarized light because there is no distinction between the substance and its mirror image.
It is significant to remember that some substances, despite having chiral centers, may look optically inactive. This is due to the possibility that the compound contains an equal amount of both enantiomers, whose competing optical activities cancel one another out. These substances, often known as racemic mixes or racemates, don't rotate plane-polarized light.
In conclusion, optically inactive chemicals lack chiral centers or have an equal number of chiral centers with opposing configurations, which prevents them from rotating plane-polarized light.
To know more about the optically inactive compound refer here :
https://brainly.com/question/29090133#
#SPJ11
__________ is a gel electrophoresis method that separates proteins on the basis of their relative contents of acidic and basic residues.When a protein is at its pI, it has a net charge of ________ and will not be attracted to the positively charged anode so it will not move.
Two-Dimensional Gel Electrophoresis (2DGE) is a gel electrophoresis method that separates proteins on the basis of their relative contents of acidic and basic residues. When a protein is at its pI (isoelectric point), it has a net charge of zero.
What is Two-Dimensional Gel Electrophoresis ?The primary technique for proteomics research is two-dimensional gel electrophoresis, or 2D-PAGE. It isolates a complex combination of samples by using two different protein characteristics. Proteins can be separated in the first dimension by their pI value, and in the second dimension by their relative molecular weight. Proteins were initially visualised using ³²P or ³⁵S labelling. This is now being superseded by more sensitive approaches like SYBRO Ruby. Advances have been made at several phases of the 2D-PAGE technology, which can separate up to a staggering 10,000 proteins in just one single gel. A 2D-PAGE gel picture is recorded and analysed to determine the amount of proteins expressed in a certain tissue.
Learn more about Two-Dimensional Gel Electrophoresis here:
https://brainly.com/question/30514540
#SPJ1
Compare the protons in 127^I and 131^I.
A. 127^I has more protons than 131^I
B. 131^I has more protons than 127^I
C. 131^I has the same number of protons as 127^I
Compare the protons in 127^I and 131^I.
Both isotopes are of iodine, which is represented by the symbol 'I'. The atomic number of iodine is 53, which indicates the number of protons in the nucleus.
Therefore, the comparison of protons in 127^I and 131^I is as follows:
A. 127^I has more protons than 131^I - Incorrect
B. 131^I has more protons than 127^I - Incorrect
C. 131^I has the same number of protons as 127^I - Correct
Your answer: C. 131^I has the same number of protons as 127^I
Both 127^I and 131^I have 53 protons, as they are both isotopes of iodine. The difference between them is in the number of neutrons, not protons.
To know more about isotopes :
https://brainly.com/question/20596678
#SPJ11
How many ppm is 1%?
a) 100
b) 1,000
c) 10,000
d) 100,000
10,000 ppm is 1%. Thus, the right answer is the option (c).
Percent is the number that is expressed by the denominator as 100 or hundred. That is 1% can be expressed as 1/100 or 0.01 in fractions and decimals respectively. It can also be expressed as [tex]10^{-2[/tex].
Ppm is the per part million that is expressed by the denominator as a million or 1,000,000. That is 1 ppm can be expressed as 1/1,000,000 or 0.000001 in fractions and decimals respectively. It can be expressed as [tex]10^{-6[/tex].
Therefore 1 ppm = [tex]10^{-6[/tex]
1% = [tex]10^{-2[/tex].
[tex]10^{-2[/tex]. is expressed as [tex]\frac{10^{-2}}{10^{-6}}[/tex] or 10,000
Learn more about Ppm:
https://brainly.com/question/31545438
#SPJ4
Trial [B]O [A]o Initial Rate (M/min) A) Rate = k[A]B) Rate = K[A]C) Rate = K[A][B]D) Rate = k[A]*[B]E) Rate = kAIB)
In a chemical reaction, the rate is the speed at which reactants are consumed and products are formed. The initial rate refers to the rate at the beginning of the reaction, when the concentrations of reactants are highest and the rate is typically fastest.
The rate law describes the relationship between the concentrations of reactants and the rate of the reaction. It can be expressed mathematically using the terms you mentioned:
A) Rate = k[A]^B - This rate law states that the rate is directly proportional to the concentration of reactant A raised to the power of B. This is known as a "simple" or "unimolecular" reaction.
B) Rate = K[A] - This rate law states that the rate is directly proportional to the concentration of reactant A. This is known as a "first-order" reaction.
C) Rate = K[A][B] - This rate law states that the rate is directly proportional to the concentrations of both reactants A and B. This is known as a "second-order" reaction.
D) Rate = k[A]*[B] - This rate law states that the rate is directly proportional to the product of the concentrations of reactants A and B. This is known as a "bimolecular" reaction.
E) Rate = kAI*B) - This rate law states that the rate is directly proportional to the concentrations of reactants A and B, as well as the concentration of a catalyst I. This is known as a "catalyzed" reaction.
By measuring the initial rate of a reaction under different conditions, scientists can determine the rate law and reaction order. This information is important for understanding the mechanism of the reaction and predicting how changes in reactant concentrations or reaction conditions will affect the rate.
To know more about rate law refer here:
https://brainly.com/question/30379408
#SPJ11
Among the following, which element of the third period has the largest atomic radius? O Al (Z=13) O Na (Z=11) O Si (Z=14) O Cl (Z=17)
So, Na (Z=11) has the largest atomic radius among the given elements in the third period.
What factors affect the atomic radius of an element?The element with the largest atomic radius among the given compounds is Na (Z=11) which is a group 1 element and has only one valence electron, leading to a larger atomic radius compared to the other elements in the third period.
1. List the elements given: Al (Z=13), Na (Z=11), Si (Z=14), and Cl (Z=17).
2. Understand that atomic radius generally decreases across a period from left to right due to an increase in effective nuclear charge.
3. Since Na is the farthest left element among the options provided, it has the largest atomic radius.
To know more about Atomic Radius:
https://brainly.com/question/29440273
#SPJ11
neon atoms are attracted to each other by group of answer choices covalent bonding h-bonding metallic bonding ion-dipole forces london-dispersion forces dipole-dipole forces intramolecular forces
Neon atoms are attracted to each other by London-dispersion forces, which arise due to the temporary polarization of electron density in one atom that induces a dipole in a neighboring atom. This is the correct option.
Neon atoms are not attracted to each other by covalent bonding, metallic bonding, or H-bonding, as these types of bonding require the sharing or transfer of electrons between atoms, and neon is a noble gas with a complete outer electron shell that is highly stable and does not readily form chemical bonds.
Instead, neon atoms are attracted to each other by London-dispersion forces, which are a type of intermolecular force that arises due to the temporary polarization of electron density in one atom that induces a dipole in a neighboring atom.
In the case of neon, the electron cloud surrounding the nucleus is highly symmetric, and there is no permanent dipole moment.
However, due to the motion of electrons, there is a temporary dipole moment in one neon atom that induces a dipole moment in a neighboring neon atom.
This temporary dipole moment can induce similar temporary dipole moments in adjacent atoms, leading to an attractive force between the neon atoms.
to know more about London-dispersion forces refer here:
https://brainly.com/question/31038712#
#SPJ11
the tollens test is positive in the presence of an aldehyde because aldehydes can be converted to what type of species when they interact with the tollens reagent?
The Tollens test is positive in the presence of an aldehyde because aldehydes can be converted to silver ions (Ag+) when they interact with the Tollens reagent. This reaction forms a silver mirror on the inside of the test tube, indicating the presence of an aldehyde.
The Tollens reagent is made up of silver nitrate (AgNO3) and ammonia (NH3), and the reaction involves the reduction of Ag+ ions to metallic silver (Ag) by the aldehyde. This reaction is used to distinguish aldehydes from ketones, as ketones do not react with the Tollens reagent.
To know more about Tollens test refer here:
https://brainly.com/question/31520675#
#SPJ11
