For a given element, the black lines on an absorption spectrum appear at

The kinetic energy of the second particle is 2K.

Charge of the first particle = Q

Charge on the second particle = 2Q

mass of the first particle = m

mass of the second particle = m/2

Potential difference applied = V

Given that, mass doesn't have an effect on the kinetic energy, just on the speed.

The kinetic energy attained by the first particle,

K = charge x potential difference

K = Q x V = QV

So, the accelerating potential, V = K/Q

Since, the second particle is accelerated from rest through the same potential difference, its kinetic energy,

K' = 2Q x V

K' = 2K

To learn more about accelerating potential, click:

https://brainly.com/question/13290525

#SPJ4

All of the above factors affect friction between two surfaces, including the amount of force pressing the surfaces together, the smoothness of the surfaces, and the weight of the object resting on top.

Several things affect friction between two surfaces. The amount of pressure exerted on the two surfaces is important because it influences the normal force, which in turn impacts the frictional force. Friction is also influenced by the smoothness or roughness of the surfaces because rougher surfaces provide more interlocking points, which raise friction.

Friction is impacted by weight because increased normal force leads to increased frictional force when an object is lying on top of two surfaces. In conclusion, each of these variables influences how much friction there is between two surfaces.

Learn more about friction:

https://brainly.com/question/24338873

#SPJ4

The statement "the electrical force between charges depends only on the charges' magnitude and separation distance" is correct.

An electric force is the interaction of either attractive force or repulsive force between two charged bodies. This force is similar to other forces because it affects and impacts towards a particular object and can be easily demonstrated by Newton’s law of motion. Electric force is one of the forces which is exerted over other bodies.

The force between two charges is directly proportional to the product of their magnitudes and inversely proportional to the square of the separation distance between them, according to Coulomb's Law. Therefore, the electrical force between charges is determined solely by the magnitude of the charges and their separation distance.

To learn more about electrical force https://brainly.com/question/30236242

#SPJ11

When a buck-boost transformer has a current less than nine amperes, an overcurrent protection device is allowed to be rated at not more than 125% of the transformer's primary current.

To calculate the rating of the overcurrent protection device:
1. Determine the primary current of the transformer (let's assume it's less than 9 amperes).
2. Multiply the primary current by 125% (or 1.25) to find the maximum allowed rating for the overcurrent protection device.

For example, if the primary current is 8 amperes, the maximum allowed rating for the overcurrent protection device would be 8 x 1.25 = 10 amperes.

To know more about overcurrent protection device:

https://brainly.com/question/28256039

#SPJ11

The object will continue to move in a straight line at a constant velocity unless acted upon by an external force.

Translational equilibrium refers to a state where an object is not experiencing any net force that is causing it to move in a particular direction. This means that the object is either at rest or moving with a constant velocity. In terms of movement, it means that the object's motion is stable and not changing in direction or speed. In terms of movement, this means that the object will either remain at rest or continue moving at a constant velocity, as there is no unbalanced force to cause any change in its motion.

Learn more about motion Refer: https://brainly.com/question/22810476

#SPJ11

The skier must push with a force of 110.5 N to move at a constant speed on the snow.

To calculate the force required to move the cross country skier at a constant speed, we need to use the formula:

F = m * g * uk

where F is the force required, m is the mass of the skier, g is the acceleration due to gravity (9.81), and uk is the coefficient of kinetic friction between the skis and the snow.

Substituting the given values, we get:

F = 84.7 kg * 9.81 * 0.131

= 110.5 N

The coefficient of kinetic friction (uk) is a dimensionless quantity that represents the amount of friction between two surfaces in relative motion. In this case, it represents the friction between the bottom of the skis and the snow.

The value of uk depends on several factors, such as the roughness of the surfaces, the temperature, and the pressure.

learn more about Forces here:

https://brainly.com/question/26115859

#SPJ4

When a Uranium 238 nucleus absorbs a neutron, it becomes Uranium 239. The correct answer is e. 239U.

The Uranium 239 nucleus then undergoes beta decay, where a neutron in the nucleus is converted into a proton, releasing an electron and an anti-neutrino. This results in the nucleus having one more proton, making it a new element. Therefore, the final nucleus after this decay is 239U.

When a Uranium 238 nucleus "swallows" a neutron and then decays via beta decay, emitting an electron and an anti-neutrino, the nucleus that remains after this decay is 239Pu.
Here's the step-by-step explanation:
1. The Uranium 238 nucleus captures a neutron, becoming Uranium 239 (U-239).
2. The U-239 undergoes beta decay, in which a neutron is converted into a proton, releasing an electron and an anti-neutrino.
3. This process results in the formation of a Plutonium 239 (Pu-239) nucleus, as there is now an additional proton.
So, the correct answer is a. 239Pu.

Visit here to learn more about Uranium:

brainly.com/question/31187694

#SPJ11

The intensity of sound from a band with a sound level of 120 dB is 1 W/m2.

The intensity of sound is defined as the amount of energy that is transmitted through a unit area per unit time. It is usually measured in watts per square meter (W/m2). The sound level of a band is usually measured in decibels (dB), which is a logarithmic unit of measurement that expresses the ratio of the sound pressure level to a reference value.
To determine the intensity of sound from a band with a sound level of 120 dB, we need to use the following formula:
[tex]I = I0 \times  10^{(L/10)[/tex]
Where I0 is the reference intensity (10-12 W/m2), L is the sound level in decibels (120 dB), and I is the intensity of sound in watts per square meter (W/m2).
Plugging in the values, we get:
[tex]I = 10^-12 \times  10^{(120/10)\\I = 10^-12 \times  10^{12[/tex]
I = 1 watt per square meter (W/m2)
Therefore, the intensity of sound from a band with a sound level of 120 dB is 1 W/m2. This means that the band is producing a very loud sound that can cause hearing damage if exposure is prolonged. It is important to protect your ears when attending loud concerts or events by wearing earplugs or earmuffs.

For more such questions on intensity visit:

https://brainly.com/question/14252912

#SPJ11

The magnitude of the change in potential energy of the charge is 1.116 J.

This can be calculated using the equation:

ΔPE = qΔV

where ΔPE is the change in potential energy, q is the charge moved, and ΔV is the change in electric potential.

In this case, q = -4 ×10-3 C (negative because the charge is moved from the bottom plate to the top plate) and ΔV = 331 V - 52 V = 279 V (the potential difference between the plates).

Substituting these values into the equation, we get:

ΔPE = (-4 ×10-3 C) x (279 V)
ΔPE = -1.116 J

Therefore, the magnitude of the change in the potential energy of the charge is 1.116 J.

To know more about potential energy click here:

https://brainly.com/question/24284560

#SPJ11

The total momentum change of an egg being caught would not differ based on the speed at which it is caught. This is due to the law of conservation of momentum, which states that in a closed system, the total momentum before an event must be equal to the total momentum after the event.

In this case, the system includes both the egg and the catcher. When the egg is falling, it has a certain amount of momentum due to its mass and velocity.

When it is caught, the catcher applies an equal and opposite force, resulting in a change in the egg's momentum. However, the total momentum of the system (egg and catcher) must remain constant.

Thus, the total momentum change would be the same regardless of the speed at which the egg is caught.

It is important to note that this assumes a perfectly closed system with no external forces acting on the egg or catcher. In reality, there may be slight variations due to factors such as air resistance and the force applied by the catcher.

For more such answers on Total Momentum Change

https://brainly.com/question/7538238

#SPJ11

The wave described in the question is a longitudinal wave. Option C

Longitudinal waves are waves in which the particles of the medium vibrate back and forth in the same direction as the wave travels. This is in contrast to transverse waves, in which the particles of the medium vibrate perpendicular to the direction of the wave.
In the example given, the wind creates a disturbance in the field of grain, causing the plants to move back and forth. This movement creates a wave that travels across the field. The particles of the plants are moving in the same direction as the wave, making it a longitudinal wave.
Polarized waves are waves in which the oscillations occur in a single plane, while electromagnetic waves are waves that consist of oscillating electric and magnetic fields. Neither of these types of waves are applicable to the scenario described in the question.
In summary, the wave described in the question is a longitudinal wave, as the particles of the medium (the plants) vibrate back and forth in the same direction as the wave travels.So, option C is correct.

For more such questions on longitudinal wave visit:

https://brainly.com/question/14364881

#SPJ11

Based on the given scenario, the electron would be affected by the magnetic field of the horseshoe magnet.

As it is shot through the spot between the ends of the magnet, it would experience a repulsive force from both poles.

This would cause its direction to change and it would be turned back.

The increase in speed would depend on the strength of the magnetic field and the distance between the electron and the poles.

Ultimately, the electron would not be unaffected by the field, but rather would experience a force that changes its trajectory.

It is not necessarily attracted to one pole and repelled by the other, but rather experiences a repulsive force from both poles.

To know more about magnetic field here

https://brainly.com/question/23096032

#SPJ11

To calculate the work done by the friction force on a 5.0 kg box sliding a 10 m distance on ice with a coefficient of kinetic friction of 0.20, follow these steps:

1. Calculate the normal force (N): Since the box is on a flat surface, the normal force is equal to its weight, which is the mass (m) times gravity (g).
  N = m * g
  N = 5.0 kg * 9.81 m/s²
  N ≈ 49.05 N

2. Calculate the friction force (F_friction): Use the coefficient of kinetic friction (μ_k) and the normal force (N).
  F_friction = μ_k * N
  F_friction = 0.20 * 49.05 N
  F_friction ≈ 9.81 N

3. Calculate the work done by the friction force (W): Use the friction force (F_friction) and the distance (d) the box slides.
  W = F_friction * d * cos(θ)
  Since the friction force opposes the motion, the angle between the force and the displacement is 180 degrees (π radians), so cos(θ) = -1.
  W = 9.81 N * 10 m * -1
  W ≈ -98.1 J

The work done by the friction force on the 5.0 kg box sliding a 10 m distance on ice with a coefficient of kinetic friction of 0.20 is approximately -98.1 joules.

To know more about normal force :

https://brainly.com/question/13312273

#SPJ11

The ball is in the air for approximately 4.15 seconds.

What is Projectile Motion?

Projectile motion refers to the motion of an object that is launched or thrown into the air and then moves under the influence of gravity alone. The object follows a curved path, known as a trajectory, as it moves through the air.

To solve this problem, we can use the following parametric equations for the x and y positions of the golf ball as a function of time:

x(t) = V0 * cos(theta) * t

y(t) = V0 * sin(theta) * t - (1/2) * g *[tex]t^{2}[/tex]

where V0 is the initial velocity of the golf ball, theta is the angle of elevation, and g is the acceleration due to gravity.

a.) The ball will be in the air until it hits the ground, which occurs when y = 0. Solving the y equation for t when y = 0 gives:

0 = V0 * sin(theta) * t - (1/2) * g * [tex]t^{2}[/tex]

t = (2 * V0 * sin(theta)) / g

Plugging in the given values, we get:

t = (2 * 160 ft/sec * sin(30 deg)) / (32.2 ft/[tex]sec^{2}[/tex]) ≈ 4.15 sec

Therefore, the ball is in the air for approximately 4.15 seconds.

b.) The maximum height of the ball occurs when the y velocity is zero. Solving the y equation for t when vy = 0 gives:

0 = V0 * sin(theta) - g * t

t = V0 * sin(theta) / g

Plugging in the given values, we get:

t = 160 ft/sec * sin(30 deg) / 32.2 ft/[tex]sec^{2}[/tex] ≈ 2.03 sec

Substituting this time back into the y equation gives the maximum height:

y_max = V0 * sin(theta) * t - (1/2) * g * [tex]t^{2}[/tex]

y_max = 160 ft/sec * sin(30 deg) * 2.03 sec - (1/2) * 32.2 ft/[tex]sec^{2}[/tex] * (2.03 sec)^2

y_max ≈ 116.5 ft

Therefore, the maximum height of the ball is approximately 116.5 feet.

c.) The horizontal distance traveled by the ball is given by the x position at the time the ball hits the ground, which is:

x = V0 * cos(theta) * t

x = 160 ft/sec * cos(30 deg) * 4.15 sec

x ≈ 561 ft

Therefore, the ball travels approximately 561 feet horizontally in the air.

Learn more about Projectile Motion

https://brainly.com/question/24216590

#SPJ1

The force of the muscle contraction is approximately 1.962 Newtons.

To calculate the force of a muscle contraction given the vertical calibration, you need to know the weight of the object that is being lifted by the muscle. You can then use the weight and the vertical calibration to calculate the force of the muscle contraction.

In this example, the vertical calibration is 1 cm/100 g. This means that for every 1 cm of displacement, the weight of the object increases by 100 g. If the measurement is 2 cm, then the weight of the object has increased by:

Weight = 100 g/cm * 2 cm = 200 g

To convert the weight to force, we need to use the acceleration due to gravity, which is approximately 9.81 [tex]m/s^2[/tex]. We can convert the weight in grams to weight in Newtons using the following formula:

Force = Weight * 9.81 m/[tex]s^2[/tex] * (1 kg / 1000 g)

where 1 kg / 1000 g is the conversion factor from grams to kilograms.

Plugging in the weight we calculated above, we get:

Force = 200 g * 9.81 m/[tex]s^2[/tex] * (1 kg / 1000 g)

= 1.962 N

Therefore, the force of the muscle contraction is approximately 1.962 Newtons.

To learn more about weight visit:

https://brainly.com/question/10069252

#SPJ11

The sign of the excess charge on the ground would be positive for a typical thundercloud the bottom of the cloud is negatively charged.

In a typical thundercloud, the bottom of the cloud is negatively charged. When this occurs, it induces an excess charge on the ground. The excess charge on the ground will be opposite in sign to the charge in the cloud. Therefore, the sign of the excess charge on the ground is positive. Every storm cloud has positive power in the upper portion of the cloud, negative power in the lower half, and in many tempests while perhaps not in all there is a concentrated positive charge underneath the super regrettable charge. The droplets and crystals in the air move apart and bump together during the storm. This focuses on making static electrical charges the mists. These clouds have a "plus" and a "minus" end, just like a battery. The cloud's plus, or positive, charges are at the top.

learn more about Thundercloud here

https://brainly.com/question/14626880

#SPJ11

The arrowheads on the cutting-plane in a sectional view indicate the direction of sight. In other words, they show the direction in which the observer is looking at the object.

The cutting-plane is an imaginary plane that slices through the object, and the arrowheads point in the direction of the cut. This helps to clarify the relationship between the view and the object.

In addition to the arrowheads, there are other types of lines associated with sectional views. For example, the section line shows the location of the cutting-plane, and it is typically a dashed line. The section hatching or shading is used to distinguish the cut surfaces from the uncut surfaces. The hatch lines are typically at a 45-degree angle and spaced evenly. The outline or contour lines are used to show the shape of the object and to differentiate between the cut and uncut portions.

Overall, the use of arrowheads, section lines, section hatching, and contour lines in a sectional view helps to provide a clear and detailed representation of the object. This type of drawing is particularly useful in engineering and architecture, where precise visualization and communication of designs are essential.

For more such questions on Arrowheads.

https://brainly.com/question/4027056#

#SPJ11

True, the sign of the angular velocity vector is always in the direction of rotation. Angular velocity is a vector quantity that describes the rate of change of angular position of an object with respect to time. The direction of the angular velocity vector is determined by the right-hand rule, where the direction of rotation is the direction of the thumb and the direction of the angular velocity vector is the direction of the curled fingers around the thumb.

#SPJ11

Angular velocity:https://brainly.com/question/20432894

The wave speed will be reduced by a factor of 0.58, which is the same as dividing the original wave speed by 1.73  Option D is correct.

To answer this question, we need to use the formula for wave speed in a string, which is:
v = √(T/μ)
Where v is the wave speed, T is the tension in the string, and μ is the mass per unit length of the string. We can see that the wave speed is proportional to the square root of μ.
If we triple the mass per unit length of the guitar string, then μ will become 3 times its original value. Plugging this into the wave speed formula, we get:
v = √(T/(3μ))
Simplifying this expression, we get:
v = (1/√3)√(T/μ)
We can see that the wave speed has been divided by the square root of 3. Therefore, the answer is:d) 0.58
The wave speed will be reduced by a factor of 0.58, which is the same as dividing the original wave speed by 1.73 (since 1/√3 ≈ 0.58). This makes sense because a higher mass per unit length means that the string will be less flexible and harder to vibrate, resulting in a slower wave speed.  Therefore option D is correct.

For more such questions on wave visit:

https://brainly.com/question/25699025

#SPJ11

Answer: 30π rad

Explanation:

The direction of the magnetic field at the location of the right wire is into the plane of the page.

To determine the direction of the magnetic field at the location of the right wire, we need to consider the following terms: magnetic field, current, and direction.

Step 1: Identify the direction of the current in the left wire.

The current flows toward the bottom of the page, as stated in the question.

Step 2: Apply the right-hand rule to find the direction of the magnetic field.

Place your right thumb in the direction of the current (downward) and curl your fingers. Your fingers will curl in the direction of the magnetic field.

Step 3: Determine the magnetic field direction at the location of the right wire.

Using the right-hand rule, your fingers will curl in a clockwise direction around the left wire, which means the magnetic field direction at the location of the right wire is directed into the plane of the page.

Learn more about magnetic field:

https://brainly.com/question/7645789

#SPJ11

To solve this problem, we need to use the equation for the acceleration of an electron in an electric field:

a = eE/m

Where a is the acceleration, e is the charge of the electron, E is the electric field strength, and m is the mass of the electron.

In this case, we know that the distance between the plates is 25 cm, so the electric field strength can be calculated as:

E = V/d = 5000/0.25 = 20000 V/m

Now we can calculate the acceleration of the electron:

a = (1.6 x 10^-19 C) x (20000 V/m) / (9.11 x 10^-31 kg) = 3.53 x 10^14 m/s^2

Next, we need to use the equations of motion to find the velocity of the electron when it reaches the opposite plate. Since the electron starts at rest, we can use the following equation:

v^2 = u^2 + 2as

Where v is the final velocity, u is the initial velocity (which is zero), a is the acceleration we just calculated, and s is the distance between the plates (25 cm = 0.25 m).

Substituting in the values, we get:

v^2 = 0 + 2 x (3.53 x 10^14 m/s^2) x 0.25 m = 4.41 x 10^14 m^2/s^2

Taking the square root of both sides gives us:

v = 2.10 x 10^7 m/s

So the velocity of the electron when it hits the opposite plate is approximately 21 million meters per second.
Hi! To find the velocity of the electron when it hits the opposite plate, we need to consider the electric potential difference (5000 V), the distance between the plates (25 cm), and the charge and mass of the electron.

First, convert the distance to meters: 25 cm = 0.25 m.

Next, use the formula for electric potential energy: PE = qV, where PE is potential energy, q is the charge of the electron, and V is the electric potential difference.

For an electron, q = -1.6 x 10^-19 C. Therefore, PE = (-1.6 x 10^-19 C)(5000 V) = -8 x 10^-16 J.

Since the electron starts at rest, all its potential energy will be converted to kinetic energy: KE = (1/2)mv^2, where m is the mass of the electron, and v is its velocity.

The mass of an electron is 9.11 x 10^-31 kg. Equating potential energy to kinetic energy:

-8 x 10^-16 J = (1/2)(9.11 x 10^-31 kg)v^2.

Solve for v: v = sqrt((-2 * 8 x 10^-16 J)/(9.11 x 10^-31 kg)) ≈ 1.32 x 10^7 m/s.

So, the electron's velocity when it hits the opposite plate is approximately 1.32 x 10^7 m/s.

To know more about electron velocity, click this link-

brainly.com/question/30736754

#SPJ11

Answer: the gauge pressure at the spigot end of the hose is approximately 4204 Pa, which is closest to option C: 4200 Pa.

Explanation: We can use Bernoulli's equation to determine the gauge pressure at the spigot end of the hose. Bernoulli's equation relates the pressure, velocity, and height of a fluid in a horizontal pipe. For an incompressible fluid (like water) flowing through a horizontal pipe of constant diameter, Bernoulli's equation can be written as:

P1 + (1/2)ρv1^2 = P2 + (1/2)ρv2^2

where:

P1 = pressure at the spigot end (unknown)

v1 = velocity at the spigot end (0 m/s, since the water is not moving initially)

P2 = pressure at the end of the hose (unknown)

v2 = velocity at the end of the hose (1.2 L/s = 0.0012 m^3/s ÷ (π/4)(0.025 m)^2 = 1.215 m/s)

ρ = density of water at 20°C = 998 kg/m^3

We can simplify the equation by assuming that the pressure at the end of the hose (P2) is atmospheric pressure (101325 Pa), since the water is flowing out into the open air. Plugging in the values and solving for P1, we get:

P1 = P2 + (1/2)ρv2^2 - (1/2)ρv1^2

= 101325 Pa + (1/2)(998 kg/m^3)(1.215 m/s)^2 - (1/2)(998 kg/m^3)(0 m/s)^2

≈ 4204 Pa

Therefore, the gauge pressure at the spigot end of the hose is approximately 4204 Pa, which is closest to option C: 4200 Pa.

To learn more about density, refer below:

https://brainly.com/question/29775886

#SPJ11

The sound level at 4 m from the truck would be 97 dB.

The sound level of a heavy truck at a distance of 85 dB at a distance of 16 m is considered to be quite loud, and it can have adverse effects on the human ear. When we move closer to the source of the sound, the intensity of the sound increases, which in turn increases the sound level.

To calculate the sound level at a distance of 4 m from the truck, we can use the inverse square law formula, which states that the intensity of sound is inversely proportional to the square of the distance from the source.

Thus, if the sound level of a heavy truck is 85 dB at 16 m, then at 4 m, the distance is 1/4th of 16 m. Hence, the sound level will increase by 4^2 = 16 times.

Therefore, the sound level at 4 m from the truck would be 85 + 10*log10(16) = 97 dB.

In conclusion, as we move closer to the source of the sound, the sound level increases, and it can have negative effects on the human ear. It is essential to take necessary precautions like wearing ear protection to avoid any hearing damage when exposed to loud sounds for prolonged periods.

Know more about intensity here:

https://brainly.com/question/22279695

#SPJ11

(a) The difference between the two given harmonic frequencies for tube A is 390 Hz - 325 Hz = 65 Hz. This difference is the fundamental frequency of the tube. The next highest harmonic frequency after 195 Hz will be 195 Hz + 65 Hz = 260 Hz.

(b) The fundamental frequency is 65 Hz, so the harmonic number for 260 Hz can be found by dividing the frequency by the fundamental frequency: 260 Hz / 65 Hz = 4. Thus, the next-highest harmonic is the 4th harmonic.

(c) The difference between the two given harmonic frequencies for tube B is 1320 Hz - 1080 Hz = 240 Hz. This difference is three times the fundamental frequency of tube B, as it has only one open end. The fundamental frequency is 240 Hz / 3 = 80 Hz. The next highest harmonic frequency after 600 Hz will be 600 Hz + 240 Hz = 840 Hz.

(d) Since tube B has only one open end, it will only produce odd harmonics. The fundamental frequency is 80 Hz, so the harmonic number for 840 Hz can be found by dividing the frequency by the fundamental frequency: 840 Hz / 80 Hz = 10.5. Since it is an odd harmonic, multiply by 2 and subtract 1: (10.5 * 2) - 1 = 20. Thus, the next-highest harmonic is the 20th harmonic.

To know more about Harmonic frequencies please click:-

https://brainly.com/question/30895025

#SPJ11

The decrease in the amplitude of spring oscillations over time is caused by damping. Damping refers to the process of removing energy from the system, which results in a decrease in the amplitude of oscillations. There are two types of damping: viscous damping and non-viscous damping.

Viscous damping occurs due to the presence of a fluid, such as air or water, which resists the motion of the spring. The fluid absorbs the energy of the spring and converts it into heat, which results in a decrease in the amplitude of oscillations. Non-viscous damping occurs due to the presence of external forces, such as friction or resistance, which also remove energy from the system.

In the case of spring oscillations, damping can be caused by a variety of factors, such as air resistance, friction between the spring and its surroundings, or internal friction within the spring itself. As the oscillations continue, the energy of the system is gradually dissipated, leading to a decrease in the amplitude of oscillations.

In summary, the damping of spring oscillations occurs due to the removal of energy from the system, which can be caused by a variety of factors. As the energy of the system is dissipated, the amplitude of oscillations gradually decreases over time.

For more such questions on Damping.

https://brainly.com/question/28229722#

#SPJ11

The direction of angular velocity is given by the Right hand-thumb rule. The tumbler in the clothes dryer spin in a clockwise direction, then the direction of angular velocity is downwards.

The direction of angular velocity is given by the Right hand-thumb rule. This rule states that if the curly fingers point in the clockwise direction, then the angular velocity points downward.  If the curly fingers point in the direction of an anti-clockwise direction, then the thumb fingers point upwards.

Thus, the if the tumbler in a clothes dryer spin in a clockwise direction, angular velocity is in a downward direction.

Learn more about angular velocity :

https://brainly.com/question/13649539

#SPJ4

To make the net force on the particle zero, the third force vector, F3, must be equal and opposite to the vector sum of F1 and F2.

To find the vector sum of F1 and F2, we add their respective x and y components:

Fx = F1x + F2x = (3.0N) - (6.0N) = -3.0N
Fy = F1y + F2y = (-4.0N) + (4.5N) = 0.5N

Therefore, the vector sum of F1 and F2 is F1+F2 = (-3.0N)x^ + (0.5N)y^.

To make the net force zero, the third force vector, F3, must be equal and opposite to F1+F2:

F3 = -(F1+F2)
F3 = -(-3.0N)x^ - (0.5N)y^
F3 = (3.0N)x^ + (0.5N)y^

Therefore, a third force of (3.0N)x^ + (0.5N)y^ would make the net force on the particle zero.

To know more about net force:

https://brainly.com/question/29261584

#SPJ11

When you catch an egg of mass m that is heading toward your hand at speed v, the egg undergoes a momentum change equal to its initial momentum. The momentum of the egg changes by an amount equal to its initial momentum, which is mv.

Momentum is defined as the product of mass and velocity and is a vector quantity with magnitude and direction.

Since the egg is initially moving with a velocity of v, its momentum is given by

p = mv.

When you catch the egg, its velocity drops to zero, and hence its momentum also drops to zero.

Therefore, the magnitude of the momentum change is equal to the initial momentum of the egg, which is given by

|Δp| = |p_f - p_i| = |-mv| = mv

In other words, when you catch the egg, the momentum of the egg changes by an amount equal to its initial momentum, which is mv.

This momentum change is also equal to the force that you exert on the egg to bring it to a stop, as per Newton's second law of motion (F = Δp/Δt).

For more such answers on the momentum

https://brainly.com/question/1042017

#SPJ11