Answer: C. Delivery. Grace's investigation of the security incident involving USB drives with infected files in the parking lot of an office building corresponds to the "Delivery" stage in the Cyber Kill Chain. So the correct answer is:
The "Command and Control" phase of the cyber kill chain describes how the cyber actor communicates with the malware installed on a compromised system.
The cyber kill chain is a model of how cyber-attacks are conducted, and it consists of seven stages. These stages are: Reconnaissance, Weaponization, Delivery, Exploitation, Installation, Command and control Actions on objectives. The Command and Control (C2) phase is the third phase in the cyber kill chain. At this phase, the attacker has already gained access to the targeted system and is now seeking to communicate with the malware installed on the compromised system. This communication allows the attacker to exert control over the system and perform activities such as information stealing, data exfiltration, and system damage.
Malware is a general term used to describe software that is specifically intended to cause harm to a computer system or other devices. Malware is often used by cybercriminals to gain access to personal and confidential information or to control a computer system.
Learn more about Cyber Kill Chain here
https://brainly.com/question/31257844
#SPJ11
The GBU-15's powered control surfaces are located on the
The GBU-15's powered control surfaces are located on the fins of the weapon. These fins use small rockets to maneuver the weapon during flight, allowing for greater accuracy and precision in hitting a target.
The Guided Bomb Unit or GBU-15 is an unpowered, glide weapon used to destroy high value enemy targets. It was designed for use with F-15E, F-111F and F-4 aircraft, but the U.S. Air Force is currently only deploying it from the F-15E Strike Eagle.
Fins. Conventional fins stabilize the bomb as it free falls following separation from the aircraft. Fins cause the bomb to fall in a smooth, definite curve to the target, instead of tumbling through the air. The Air Force and Navy also attach Precision guidance packages to their bombs allowing precise targeting.
To know more about bombs: https://brainly.com/question/27356421
#SPJ11
How do you nudge keyframes?
1. Select the keyframes
2. Nudge the keyframes
Steps are as follows:
1. Select the keyframes: Click on the keyframes you want to nudge in the timeline or keyframe editor, depending on your software.
2. Nudge the keyframes: Use the arrow keys on your keyboard to move the selected keyframes left or right. This will nudge the keyframes earlier or later in the timeline, adjusting the timing of the animation.
Remember that the terms "nudge" refers to the action of slightly moving something, and "keyframes" are points in an animation that define the starting and ending points of any smooth transition or movement.
Learn more about keyframes:
brainly.com/question/31597431
#SPJ11
How can we drop 2 column from a DataFrame?
To drop 2 columns from a DataFrame, you can use the "drop" method with the "columns" parameter.
How to use drop()?
1. Import the necessary library: `import pandas as pd`
2. Create a DataFrame (or use an existing one)
3. Use the "drop" method with the "columns" parameter and specify the column names you want to drop in a list.
Here's an example:
```python
import pandas as pd
# Create a DataFrame
data = {'A': [1, 2, 3], 'B': [4, 5, 6], 'C': [7, 8, 9]}
df = pd.DataFrame(data)
# Drop 2 columns ('B' and 'C')
df_dropped = df.drop(columns=['B', 'C'])
```
In this example, the `df_dropped` DataFrame will only have the 'A' column, as the 'B' and 'C' columns have been dropped.
To know more about the pandas library visit:
https://brainly.com/question/24942162
#SPJ11
the recovery requirements after a disaster are the time frame in which systems must be recoverable and the data that must be recovered. which two terms relate to recovery requirements?
The two terms that relate to recovery requirements are "Recovery Time Objective (RTO)" and "Recovery Point Objective (RPO)."
Recovery Time Objective (RTO): RTO is the time frame within which systems, applications, and data must be recovered after a disaster. It represents the maximum allowable downtime that an organization can tolerate without significant business impact. For example, if an organization has an RTO of 4 hours, it means that systems and data must be restored within 4 hours of a disaster.
Recovery Point Objective (RPO): RPO is the amount of data that an organization is willing to lose in the event of a disaster. It represents the maximum acceptable data loss that an organization can tolerate without significant business impact. For example, if an organization has an RPO of 1 hour, it means that the organization is willing to lose up to 1 hour's worth of data in the event of a disaster.
Both RTO and RPO are critical metrics that help organizations establish their disaster recovery strategy and plan for business continuity. By defining RTO and RPO, organizations can determine the level of redundancy, backup, and recovery measures needed to ensure that their critical systems and data are protected and can be quickly restored in the event of a disaster.
To know more about Recovery Time Objective (RTO) visit:
https://brainly.com/question/15187241
#SPJ11
Explain the sequence of events that happens when a page
-
fault occurs.
When a page fault occurs, the operating system will look for the page in the backing store. If the page is not in the backing store, it must be loaded into memory from the secondary storage. Once the page is loaded into memory, the page table is updated to reflect the new location of the page. Finally, the instruction that caused the page fault is restarted and will now be able to access the required page.
When a page fault occurs, the CPU generates an interrupt to the operating system. The operating system then saves the state of the process that caused the page fault and begins the process of locating and loading the required page. This involves accessing the backing store, loading the page into memory, updating the page table, and restarting the instruction that caused the page fault. Once the page has been loaded into memory and the instruction has been restarted, the process can continue executing as normal.
You can learn more about page fault at
https://brainly.com/question/29679996
#SPJ11
Which two mechanisms were used in Singleton to achieve the pattern's goals?
The two mechanisms used in Singleton to achieve the pattern's goals are a Private constructor and a Static instance variable or method.
What are the mechanisms used in Singleton?
1. Private constructor: A private constructor is used to restrict the instantiation of the Singleton class from outside the class. This ensures that only one instance of the class is created.
2. Static instance variable or method: A static instance variable is used to hold the single instance of the Singleton class, and a static method is provided to access this instance. The static method ensures that the single instance is returned whenever it is called, thus maintaining the Singleton pattern's goal of having only one instance of the class.
These mechanisms help achieve the Singleton pattern's goals of ensuring that there is only one instance of a class and providing a global point of access to that instance.
To know more about constructor visit:
https://brainly.com/question/31171408
#SPJ11
SELECT vendor_name, invoice_dateFROM vendors v JOIN invoices iON v.vendor_id = i.vendor_id;Refer to code example. This type of join is called a/an __________________ join.
Based on the given code, the type of join is an inner join.
SQL Inner Join is a type of join that is used to combine records from two related tables, based on the common columns.
Based on the code example provided:
SELECT vendor_name, invoice_date
FROM vendors v JOIN invoices i
ON v.vendor_id = i.vendor_id;
Specifically, this is an example of an inner join using the JOIN keyword and the ON clause to specify the join condition. The query is selecting the vendor name and invoice date from the vendors and invoices tables, respectively, and joining the two tables based on their common vendor_id column.
To learn more about SQL visit : https://brainly.com/question/23475248
#SPJ11
public void processString (String str){ str = str.substring(2, 3) + str.substring(1, 2) + str.substring(0, 1);}What is printed as result of executing the following statements (in a method in the same class)?String str = "Frog";processString(str);System.out.println(str);
The result of executing these statements will be printing the original value of 'str', which is "Frog".
In order to understand what will be printed as a result of executing the given statements, let's analyze the code step by step.
1. A String variable 'str' is initialized with the value "Frog".
2. The method 'processString' is called with 'str' as the argument.
3. Inside the method, the original 'str' value is modified by taking substrings of the input string and rearranging them. However, this change only affects the local variable 'str' inside the method, not the original 'str' outside the method.
4. After the method is executed, the program moves on to the next line and prints the original 'str' value using 'System.out.println(str);'
In summary, the result of executing these statements will be printing the original value of 'str', which is "Frog". The 'processString' method does not affect the original 'str' variable, as it only modifies a local copy of it.
Learn more about substring here:
https://brainly.com/question/30765811
#SPJ11
int[] scores = {80, 92, 91, 68, 88}; int index = 0; int mystery = 91; while (index < scores.length) { if (scores[index] == mystery) break; index ++; } System.out.println(index);
The code will output the index of the first occurrence of the 'mystery' value (91) in the 'scores' array, which is 2 in this case.
You have provided a code snippet that uses an array, index, while loop if statement and println. Here's an explanation of the code:
1. Declare an integer array called 'scores' with the elements {80, 92, 91, 68, 88}.
2. Declare an integer variable 'index' and initialize it to 0.
3. Declare an integer variable 'mystery' and set its value to 91.
4. Use a while loop to iterate through the 'scores' array. The loop will continue as long as the 'index' is less than the length of the array.
5. Inside the loop, check if the value at 'scores[index]' is equal to the value of 'mystery' (91).
6. If the value at 'scores[index]' is equal to 'mystery", break out of the loop.
7. If the value at 'scores[index]' is not equal to 'mystery', increment 'index' by 1.
8. After the loop, use System.out.println() to print the value of 'index'.
Learn more about println: https://brainly.com/question/18554491
#SPJ11
Explain the distinction between global allocation versus local allocation.Provide example
Global allocation refers to the allocation of resources or funds across an entire organization or company, while local allocation refers to the allocation of resources within a specific department or division of the organization.
In global allocation, resources are allocated based on the organization's overall priorities and goals. This means that decisions on how much budget to allocate to each department are made at a higher level, often by top management or a board of directors. For example, a multinational corporation may allocate a certain percentage of its budget to research and development across all its subsidiaries worldwide.
On the other hand, local allocation involves the allocation of resources within a specific department or division. In this case, the decision-making authority lies with the department manager or team leader. The allocation of resources is based on the department's specific needs and goals, which may differ from those of other departments. For example, within a marketing department, the manager may allocate more resources to social media advertising compared to traditional print advertising.
To learn more about Allocations, visit:
https://brainly.com/question/26475885
#SPJ11
How are lock bits useful in I/O requests?
Lock bits are a valuable tool in managing input/output (I/O) requests in computer systems. These bits are used to control access to specific resources, such as memory or devices, by preventing simultaneous access by multiple processes or threads.
For such more question on allocation
https://brainly.com/question/5322091
#SPJ11
How many logical drive is it possible to fit on to a physical disk?
The number of logical drives that can be fit onto a physical disk depends on the file system used and the size of the physical disk.
In general, a physical disk can be partitioned into multiple logical drives, each of which appears to the operating system as a separate storage device. The number of logical drives that can be created is limited by the maximum number of partitions supported by the file system. For example, the FAT32 file system supports up to 32 partitions on a physical disk, while the NTFS file system supports up to 128 partitions.Additionally, the size of the physical disk can also impact the number of logical drives that can be created. Larger physical disks can typically support more logical drives than smaller disks, as there is more space available for partitioning.It is important to note that creating too many partitions can lead to inefficiencies and decreased performance, as the file system overhead increases with each partition created. Therefore, it is recommended to create a smaller number of partitions that are appropriately sized for the intended use case.
To learn more about physical disk click on the link below:
brainly.com/question/30510345
#SPJ11
Intrinsically _________s are a very linear device
Intrinsically safe devices are very linear devices.
We have,
Intrinsically safe devices are designed to operate in hazardous environments where there is a risk of explosion or fire due to the presence of flammable gases, vapors, or dust.
These devices are specifically engineered to limit electrical energy and prevent any possible ignition source and are tested and certified to meet strict safety standards.
Intrinsically safe devices typically use very low levels of electrical power and are very linear in their operation, meaning that their output is directly proportional to their input. This linear behavior allows them to be easily integrated into complex control systems and ensures that their output is predictable and reliable.
Thus,
Intrinsically safe devices are very linear devices.
Learn mroe about linear devices here:
https://brainly.com/question/28558766
#SPJ4
What is an example of a file type that can be used to consolidate a group of files?
An example of a file type that can be used to consolidate a group of files is a compressed or zipped file.
What is a ZIP file?
Compressed files can contain multiple files and folders, allowing you to consolidate them into a single file for easier sharing or storage. Once you have created a compressed file, you can easily extract the individual files as needed.
To create a ZIP file, follow these steps:
1. Select the group of files you want to consolidate.
2. Right-click on the selected files.
3. Choose the "Send to" option in the context menu.
4. Select "Compressed (zipped) folder" from the sub-menu.
This will create a new ZIP file containing all the selected files, effectively consolidating them into one file.
To know more about ZIP file visit:
https://brainly.com/question/31431601
#SPJ11
Select the answer that lists the units of bytes in ascending order (from smallest to largest)A. gigabyte, megabyte, terabyteB. megabyte, terabyte, kilobyteC. gigabyte, terabyte, megabyteD. kilobyte, gigabyte, terabyte
The correct answer that lists the units of bytes in ascending order (from smallest to largest) is: D. kilobyte, megabyte, gigabyte, terabyte
What is bytes?
In computer, the data is stored in the form of bytes. A collection of 8 bits is known as bytes. The byte is used to represent a character such as a symbol, letter, or number.
Order of bytes:
The bytes are arranged from smallest to largest.
1. Kilobyte (KB) - smallest
2. Megabyte (MB)
3. Gigabyte (GB)
4. Terabyte (TB) - largest
To know more about bytes visit:
https://brainly.com/question/15166519
#SPJ11
what is MinHash (or the min-wise independent permutations locality sensitive hashing scheme)?
MinHash is a technique used in data mining and information retrieval to compare and analyze sets of data by generating a small signature for each set of data, which can be compared with other signatures to estimate the similarity between the two sets.
What are the limitations of MinHash in identifying similar sets of data?MinHash works by first generating a large number of random hash functions, each of which maps elements in the set to a hash value. For each hash function, the minimum hash value for the set is selected. These minimum values are then combined into a signature, which represents the set.
This signature can then be compared with the signatures of other sets to estimate their similarity. The Jaccard similarity coefficient, which measures the similarity between two sets as the size of their intersection divided by the size of their union, can be estimated using the number of matching values in their signatures.
The Jaccard similarity coefficient measures the similarity between two sets as the size of their intersection divided by the size of their union. When using MinHash, the Jaccard similarity coefficient can be estimated using the number of matching values in the signatures of the two sets. Specifically, the Jaccard similarity coefficient can be estimated as the ratio of the number of positions in the signatures where the values match to the total number of positions in the signatures. The higher the Jaccard similarity coefficient, the more similar the two sets are.
MinHash is widely used in applications such as document similarity analysis, DNA sequence analysis, and recommendation systems. It is particularly useful when dealing with large datasets, as it allows for efficient comparison of sets without having to compare each element in the set directly.
To know more about MinHash visit:
https://brainly.com/question/28315104
#SPJ11
What security posture assessment could a pen tester make using Netcat?
Using Netcat, a pen tester can make a security posture assessment by identifying open ports and services, banner grabbing, transferring data, establishing remote connections, and analyzing network traffic.
A penetration tester can make the following security posture assessment using Netcat:
1. Identify open ports and services: By using Netcat, a pen tester can scan target systems to identify open ports and the services running on them. This information helps assess the security posture by revealing potentially vulnerable services and misconfigurations.
2. Banner grabbing: Netcat can be used to obtain service banners, which can provide valuable information about the software and version running on the target system. This helps in identifying outdated or vulnerable software versions.
3. Data transfer: Netcat can be used to transfer files and data between systems, allowing the pen tester to assess the security posture by evaluating the ease of data exfiltration or unauthorized file transfers.
4. Establishing remote connections: A pen tester can use Netcat to establish remote connections to a target system, helping to assess the security posture by testing the system's defenses against unauthorized remote access.
5. Network traffic analysis: By using Netcat in conjunction with other tools, a pen tester can capture and analyze network traffic to identify potential vulnerabilities, misconfigurations, or security weaknesses in the network's security posture.
To learn more about Netcat visit : https://brainly.com/question/30260930
#SPJ11
You suspect that a rogue host is acting as the default gateway for a subnet in a spoofing attack. What command-line tools can you use from a Windows client PC in the same subnet to check the interface properties of the default gateway?
To check the interface properties of the default gateway from a Windows client PC in the same subnet, we need to use certain command-line tools.
These command-line tools are as follows:
1. ipconfig: This command displays the IP configuration settings of the Windows client PC. It can show the IP address of the default gateway, which can be compared to the suspected rogue host.
2. tracert: This command can be used to trace the route taken by network packets from the Windows client PC to the default gateway. If the suspected rogue host is acting as the default gateway, the tracert command may reveal additional hops or a different route than expected.
3. arp: This command displays the ARP cache of the Windows client PC. It can be used to check if the MAC address of the default gateway matches the expected value. If the MAC address is different or unknown, it may indicate that the suspected rogue host is spoofing the gateway.
By using these command-line tools, you can investigate whether a rogue host is acting as the default gateway for a subnet in a spoofing attack.
To learn more about command-line tools visit : https://brainly.com/question/30208449
#SPJ11
Explain how a session hijacking attack works.
A session hijacking attack occurs when an attacker gains unauthorized access to a user's session on a website or application. This is typically achieved by intercepting and stealing the session ID, which is a unique identifier that allows the server to recognize and maintain a user's session.
What's the process of session hijacking?The process begins with eavesdropping, where the attacker monitors network traffic to capture unencrypted session IDs.
This can be done using various methods, such as packet sniffing or man-in-the-middle attacks. Once the attacker has the session ID, they can then perform session fixation or session sidejacking.
In session fixation, the attacker tricks the user into using a predetermined session ID, while session sidejacking involves stealing a valid session ID after the user has logged in.
With the hijacked session ID, the attacker can impersonate the user and gain access to sensitive information, perform unauthorized actions, or exploit the user's privileges within the application.
To prevent session hijacking, it's crucial to use secure communication protocols like HTTPS, implement proper session management, and employ security measures such as session timeouts and cookie encryption.
Learn more about session hijacking at
https://brainly.com/question/13068625
#SPJ11
Briefly describe the segmentation memory management scheme. How does it differ from the
paging memo
ry management scheme in terms of the user's view of memory?
The segmentation memory management scheme involves dividing the memory into segments or logical units of varying sizes based on the requirements of the process. The main difference between the two memory management schemes is that the segmentation scheme allows for more flexible memory allocation, while the paging scheme offers more efficient use of memory.
Each segment is assigned a unique identifier or segment number. When a process needs to access memory, it uses the segment number to locate the required segment. This scheme differs from the paging memory management scheme in that the user's view of memory is based on segments rather than pages.
In the paging memory management scheme, the memory is divided into fixed-sized pages, and each page is assigned a unique identifier or page number. When a process needs to access memory, it uses the page number to locate the required page. The user's view of memory is based on pages rather than segments.
The user's view of memory also differs between the two schemes, with the segmentation scheme focusing on segments and the paging scheme focusing on pages.
Learn more about the segmentation memory management scheme : https://brainly.com/question/28524802
#SPJ11
which of the following is not an advantage of hibernate criteria api? a. cannot order the result set b. can add conditions while fetching results c. allows to use aggregate functions d. allows to fetch only selected columns of result
a. Cannot order the result set. This is not an advantage of Hibernate's criteria API.
Hibernate Criteria API allows the user to order the result set using the addOrder() method, which can accept an instance of Order or Sort to specify the sort order for the result set. Therefore, option A is incorrect.
The advantages of Hibernate Criteria API include:
1. Allows to add conditions while fetching results.
2. Allows to use aggregate functions.
3. Allows to fetch only selected columns of result.
Therefore, options B, C, and D are all correct advantages of Hibernate Criteria API.
Learn more about the Hibernate's criteria: https://brainly.in/question/5482449
#SPJ11
Estimating long-run cost functions using time series data on one firm is easy because of the large amounts of available data
Estimating long-run cost functions using time series data on one firm may appear to be relatively easy due to the large amounts of available data.
However, it is important to remember that the accuracy of the estimates will depend on the quality and relevance of the data used. Additionally, it is essential to consider potential factors that may affect the long-run cost functions, such as changes in technology, market conditions, and government regulations. Therefore, it is crucial to carefully analyze and interpret the data to ensure that the estimated long-run cost functions are reliable and informative.
To learn more about data click the link below:
brainly.com/question/27908593
#SPJ11
Given two arrays, write a function to compute their intersection.Example: Given nums1 = [1, 2, 2, 1], nums2 = [2, 2], return [2].Note: Each element in the result must be unique. The result can be in any order. Show Company Tags Show Tags Show Similar Problems
This function, given nums1 = [1, 2, 2, 1] and nums2 = [2, 2], the result will be [2].
Write a function to compute their intersection? To compute the intersection of two arrays, you can write a function as follows:
Learn more about arrays
brainly.com/question/30757831
#SPJ11
10.12) List 3 places malware mitigation mechanisms may be located.
The 3 places malware mitigation mechanisms may be located are: Antivirus software, Network firewalls and Intrusion Detection/Prevention Systems (IDS/IPS).
1. Antivirus software: Antivirus software is installed on devices such as computers and smartphones to detect, prevent, and remove malware. It uses various mechanisms, including signature-based detection, behavioral analysis, and heuristics to identify and mitigate malware threats.
2. Network firewalls: Network firewalls are placed at the boundaries of a network to control incoming and outgoing traffic. They use a set of predefined rules to filter out potentially malicious traffic, thus acting as a malware mitigation mechanism.
3. Intrusion Detection/Prevention Systems (IDS/IPS): These systems monitor network traffic for suspicious activities, such as malware attempting to infiltrate or spread within the network. IDS/IPS use various mechanisms, including signature-based detection, anomaly detection, and protocol analysis, to identify and mitigate malware threats.
These are three places where malware mitigation mechanisms may be located to protect devices and networks from malicious software.
To learn more about malware; https://brainly.com/question/28910959
#SPJ11
A(n) _____ computer is a computer inside another electrical device, like a TV or car.
A(n) embedded computer is a computer inside another electrical device, like a TV or car.
Embedded computers are specifically designed to perform dedicated tasks or functions within larger systems. They often have specific requirements and constraints, such as size, power consumption, and processing capabilities, to optimize their performance for the intended application.
In the case of a TV, an embedded computer can be responsible for tasks like processing video and audio signals, managing user interface, and facilitating connectivity with external devices. In a car, embedded computers can control various systems such as engine management, braking, navigation, and entertainment systems. These computers are integrated into the device's hardware, providing seamless operation and enhanced functionality.
Embedded systems are a crucial part of modern technology as they enable devices to become smarter and more efficient. Due to their specialized nature, they often require custom-designed software and hardware components, which may include microcontrollers, microprocessors, and other electronic components. Furthermore, embedded computers are designed to be reliable and resilient, as their failure could lead to significant consequences in critical applications.
In summary, embedded computers are essential components of many electrical devices, such as TVs and cars, providing dedicated functionality and enhancing overall performance. They are specifically designed to meet the requirements and constraints of their intended applications, ensuring seamless operation and reliability.
Learn more about Embedded computers here: https://brainly.com/question/28457665
#SPJ11
Classes Implemented with Process.PlugIn interface are available only for
Classes implemented with the Process.PlugIn interfaces are available only for plugins or components that are designed to work with them.
Process.PlugIn interface
Process.PlugIn interfaces are available only for creating custom plugins for a specific application or system. These classes provide the necessary structure and methods to ensure seamless integration and communication with the host application. The interface defines a standard set of methods and properties that a plugin must implement in order to interact with the host application. These classes cannot be used outside of the plugin or component context, as they are specific to the functionality provided by the plugin.
To know more about interfaces visit:
https://brainly.com/question/28481652
#SPJ11
For each user, Windows 7 can reserve a special area called a ____ where each user can keep his or her own files.
For each user, Windows 7 can reserve a special area called a "user profile" where each user can keep his or her own files.
In Windows 7, a special area reserved for each user to store their own files is called a "User Profile."For each user, Windows 7 can reserve a special area called a "user profile" where each user can keep his or her own files. The user profile contains user-specific settings and preferences, as well as documents, pictures, music, and other personal files. When a user logs into Windows 7, the operating system loads the user's profile, which determines the user's desktop background, theme, shortcuts, and other personalized settings. By default, the user profile is stored in the "C:\Users" directory, with a subfolder for each user account.Windows 7 also provides various tools and options for managing user profiles, such as copying or transferring profiles to other computers, deleting or renaming user profiles, and customizing profile settings for specific users or groups. This allows each user to have their own customized computing environment, while still sharing the same computer resources and software.
To learn more about reserve click on the link below:
brainly.com/question/29692078
#SPJ11
When you ____ a file, the file is transferred to the new location and no longer exists in its original location
When you "move" a file, the file is transferred to the new location and no longer exists in its original location. Moving a file is a file management operation that involves physically relocating the file from one folder, directory, or location to another.
1. Select the file you want to move.
2. Cut or drag the file from its current location.
3. Navigate to the new location where you want the file to be.
4. Paste or drop the file in the new location.
After completing these steps, the file will no longer exist in its original location and will be successfully transferred to the new location. This action updates the file's metadata and file path information to reflect the new location, and the file is no longer accessible in its original location. Moving a file is different from copying a file, where a duplicate of the file is created at the destination while the original file remains in its original location. Moving a file is a common operation used to organize files, rearrange file hierarchy, or transfer files to different storage locations, and it results in the file being permanently relocated to the new destination.
To learn more about duplicate; https://brainly.com/question/30440189
#SPJ11
jorge has asked you to explain to him how a touch pen can work with his android tablet. which of the following are true statements about touch pens? (choose all that apply.) a. a touch pen might use a bluetooth connection to write on a tablet. b. a touch pen is made of material that can touch the screen without damaging it. c. a touch pen might need charging. d. a touch pen does not use a wi-fi connection.
A touch pen might use a bluetooth connection to write on a tablet. This statement is true about touch pens. Therefore, the correct option is option A.
Thus was born the touch screen pen, best known as the stylus. Today, resistive touch screens are thought of as archaic technologies - inferior to their capacitive sister screens. With this shift, the very existence of the stylus has teetered in limbo. A touch pen might use a bluetooth connection to write on a tablet. This statement is true about touch pens.
Therefore, the correct option is option A.
To learn more about touch pen, here:
https://brainly.com/question/30328196
#SPJ4
a small company has purchased a new system which they want to deploy in the aws cloud but does not have anyone with the required aws skill set to perform the deployment. which service can help with this?.
A small company deploy a new system in the AWS cloud when they do not have the required AWS skill set to perform the deployment can be helped by AWS Partner Network (APN) Consulting Partners. Option D is correct.
APN Consulting Partners are certified professionals who have experience in deploying and managing applications on AWS. They can help with planning, designing, and implementing solutions on AWS, as well as provide ongoing support and optimization services.
Trusted Advisor is a service that provides best practices and optimization recommendations for AWS infrastructure, while AWS Cloud Formation is a service that enables the automated provisioning of infrastructure and applications on AWS. However, neither of these services directly provide the required AWS skill set for a company to perform the deployment.
Therefore, option D is correct.
A small company wants to deploy a new system in the AWS cloud but does not have anyone with the required AWS skill set to perform the deployment. Which AWS service can help with this?
A. Trusted Advisor
B. AWS Cloud Formation
C. AWS Partner Network (APN) Technology Partners
D. AWS Partner Network (APN) Consulting Partners
Learn more about deployment https://brainly.com/question/30092560
#SPJ11
