How long will it take for the concentration of A to decrease from 0.910 M to 0.315 for the reaction A → Products? (k = 0.153 M/s)

The kilograms of the nickel  be added to the 5.66 kg of the copper to yield the liquidus temperature of 1200 °C is 2.42 kg.

The  liquidus temperature = 1200 °C

The mass of the copper = 5.66 kg

The mass of the nickel = (mass of the copper) × (% of the nickel needed - % of nickel in the copper) / (% of nickel in the nickel - % of nickel in copper)

The mass of the nickel = (5.66 kg) × (30% - 0%) / (30% - 100%)

The mass of the nickel = (5.66 kg) × (0.3) / (-0.7)

The mass of the nickel = 2.42 kg

Thus, the mass of the nickel is 2.42 kg.

To learn more about copper here

https://brainly.com/question/15145956

#SPJ4

The pH paper's altered colour shows that the pH of the unidentified solution has also changed. The margins of the paper are coloured green, which means that the pH of the solution is greater.

You can determine if a solution is acidic or basic using red and blue test strips or litmus paper, but they cannot determine how potent the solution is. On a universal indicator, each pH value is represented by a different hue. When neutral solutions are applied, the paper becomes green.

Take off the litmus paper as soon as you have dipped one end of it into the solution. Check the colour of the blue litmus paper that was in touch with the solution on the affected area. If the solution becomes red, it is acidic.

to know more about pH measurement here;

brainly.com/question/30263302

#SPJ1

The amount of heat required for vaporization is 3504.67kJ. The correct option is option A.

The heat of vaporization/condensation also represents the amount of heat exchanged during a phase shift.

For vaporization, it is the quantity of heat needed to convert 1 g of water to 1 g of water vapor.

Given,

Mass of water = 1.55 kg

ΔH = 40.7kJ/mol

moles of water = mass ÷ molar mass

= 1550g ÷ 18

= 86.11 moles

Amount of heat required = nΔH

                                       = 86.11 × 40.7

                                        = 3504.67kJ = 3.50 × 10³ kJ

Thus, the correct option is option A.

Learn more about Heat of Vaporization, here:

https://brainly.com/question/24096079

#SPJ4

Catalysts increase reaction rates by D) providing an alternate reaction mechanism with a lower activation energy.

Catalysts are materials that can quicken chemical reactions without consuming themselves. To achieve this, they offer a different reaction route with a lower activation energy, enabling more reactant molecules to obtain the required energy for the reaction to occur.

Reduced activation energy makes it simpler for reactant molecules to cross the energy barrier and create products. Activation energy is the amount of energy needed for a reaction to take place. Both the enthalpy of a reaction, which is a measure of the heat absorbed or released during a reaction, and the equilibrium constant of a reaction, which is a gauge of how far a reaction has progressed, are unaffected by catalysts.

To know more about the catalysts refer here :

https://brainly.com/question/24430084#

#SPJ11

Given the following reactions

N₂ (g) + O₂ (g) → 2NO (g) ΔH = +180.7 kJ

2NO (g) + O₂ (g) → 2NO₂ (g) ΔH = -113.1 kJ

the enthalpy of reaction for 4NO (g) → 2NO₂ (g) + N₂ (g) is _135.2_ kJ.

Multiplying the first equation by 2 to match the number of moles of NO in the desired equation, we get:

2N₂(g) + 2O₂(g) → 4NO(g) ΔH = +361.4 kJ

Adding this to twice the second equation, we get:

2N₂(g) + 4O₂(g) → 2NO₂(g) + 4NO(g) ΔH = +135.2 kJ

Finally, cancelling out the common intermediate 2NO from both sides of the equation, we get:

4NO(g) → 2NO₂(g) + N₂(g) ΔH = -135.2 kJ

To know more about enthalpy, here

brainly.com/question/16720480

#SPJ4

After fermentation in the human cells, the lactate is converted to the pyruvate in the muscles.

The Lactic acid that is produced in the muscle cells that is transported through out the bloodstream and to the liver, and this is then converted back to the pyruvate and this is processed normally for the remaining reactions of the cellular respiration.

The Muscle cells are the commonly called as the myocytes. The cells in together will form the muscle tissue. Therefore, the Muscle cells that will convert the pyruvate to the lactate in the environment becomes anaerobic. The reaction will occurs when the oxygen is insufficient in the muscle.

To learn more about fermentation here

https://brainly.com/question/13859706

#SPJ4

In redox reactions, the [tex]^G[/tex] (change in Gibbs free energy) value can be related to the reduction potential [tex](E^o)[/tex] through the following equation:

[tex]^G = -nFE^o[/tex]

where n is the number of electrons transferred, F is the Faraday constant, and [tex]E^o[/tex] is the standard reduction potential.

The reduction potential is a measure of the tendency of a species to undergo reduction (gain of electrons). More specifically, it is the tendency of a half-reaction to occur as a reduction half-reaction, as compared to a standard hydrogen electrode (SHE) under standard conditions. The reduction potential is usually reported in volts (V).

The sign of the [tex]^G[/tex] value and the reduction potential are related. If the [tex]^G[/tex] value is negative, the reaction is spontaneous, and the reduction potential will be positive. Conversely, if the [tex]^G[/tex] value is positive, the reaction is non-spontaneous, and the reduction potential will be negative.

In summary, the [tex]^G[/tex]  values and the reduction potentials are related through the equation [tex]^G = -nFE^o.[/tex]The sign of the [tex]^G[/tex]  value and the reduction potential are related, where a negative [tex]^G[/tex] value corresponds to a positive reduction potential, indicating a spontaneous reaction, and vice versa.

Learn more about reduction potential.

https://brainly.com/question/23881200

#SPJ4

The statement about mentioned reaction saying the change in entropy is negative is true.

Entropy refers to the disorder or randomness of the system. The concept is related to thermodynamics and finds applications in understanding the properties, existence and movement of gases.

The change in number of moles of reaction can help in finding the change in entropy. The mentioned reaction proceeds with decrease in number of moles, thus entropy is negative. As we see, the Left Hand Side have total of three moles of reactants while products are only two moles.

Learn more about entropy -

https://brainly.com/question/419265

#SPJ4

The bonding that occurs between the atoms of a P4O10 molecule is covalent bonding. The correct option is a. This type of bonding involves the sharing of electrons between atoms.

In the case of P4O10, each phosphorous atom shares electrons with two oxygen atoms to form a double bond, resulting in a tetrahedral shape with four phosphorous atoms and ten oxygen atoms.

Covalent bonding is a common type of bonding in organic compounds, as it allows atoms to share electrons and form stable molecules. In the case of P4O10, the covalent bonding allows for the molecule to act as a dehydrating agent, meaning it can remove water molecules from other compounds in organic synthesis reactions.

Overall, the covalent bonding in P4O10 is essential for its function as a dehydrating agent in organic synthesis reactions and demonstrates the importance of understanding different types of chemical bonding in order to manipulate and control chemical reactions.

To know more about covalent bonding refer here:

https://brainly.com/question/10777799#

#SPJ11

This means that in one molecule of magnesium oxide, there is one magnesium cation with a charge of +2 and one oxygen anion with a charge of -2.

In a chemical formula, numbers written after the symbol of each element indicate number of atoms of that element present in one molecule of the compound. To determine the overall charge of the compound, we need to take into account the charges of the individual atoms.

In the case of magnesium oxide (MgO), magnesium is metal and tends to lose two electrons to form cation with a charge of +2 and oxygen is a nonmetal and tends to gain two electrons to form anion with charge of -2. This means that in one molecule of magnesium oxide, there is one magnesium cation with charge of +2 and one oxygen anion with a charge of -2.

If we were to write chemical formula as Mg⁺² and O₂⁻², this would imply that there are two oxygen anions, each with a charge of -2. However, in magnesium oxide, there is only one oxygen atom, and therefore, we need to write the chemical formula as MgO to correctly represent the composition of the compound.

To know more about chemical formula, refer

https://brainly.com/question/11574373

#SPJ1

The term chemiosmosis is associated with the Electron Transport Chain (ETC).

Chemiosmosis is a process in cellular respiration that involves the movement of ions across a selectively permeable membrane to generate ATP. It is a mechanism by which cells convert energy stored in electrochemical gradients into the energy stored in ATP molecules. During chemiosmosis, electrons flow through the electron transport chain (ETC) and establish a proton gradient across the inner mitochondrial membrane.

This gradient is then used by ATP synthase to generate ATP. The process is found in both eukaryotes and prokaryotes and is essential for the production of ATP in cells. Chemiosmosis plays a crucial role in many physiological processes, including muscle contraction, nerve impulses, and photosynthesis.

Learn more about chemiosmosis

https://brainly.com/question/15443163

#SPJ4

Full Question: The term chemiosmosis is associated with which process?

The Tollens test is positive in the presence of an aldehyde because aldehydes can be converted to silver ions (Ag+) when they interact with the Tollens reagent. This reaction forms a silver mirror on the inside of the test tube, indicating the presence of an aldehyde.

The Tollens reagent is made up of silver nitrate (AgNO3) and ammonia (NH3), and the reaction involves the reduction of Ag+ ions to metallic silver (Ag) by the aldehyde. This reaction is used to distinguish aldehydes from ketones, as ketones do not react with the Tollens reagent.

To know more about Tollens test refer here:

https://brainly.com/question/31520675#

#SPJ11

The concentration of the solution with an absorbance of 0.374 is 0.265 M.

According to Beer's law, the absorbance of a solution is directly proportional to the concentration of the absorbing species and the pathlength of the cell:

A = εbc

where A is the absorbance, ε is the molar absorptivity (a constant for a given substance at a specific wavelength), b is the path length of the cell in centimeters, and c is the concentration of the solution in moles per liter.

We can rearrange this equation to solve for the concentration of the solution:

c = A / (εb)

We are given that a 0.336 M solution of CO2 has an absorbance of 0.473 at a given wavelength and a 1.00 cm path length cell.

Therefore, we can calculate the molar absorptivity of CO2 at this wavelength:

ε = A / (bc) = 0.473 / (0.336 M x 1.00 cm) = 1.409 M^-1 cm^-1

Now we can use this value of ε and the absorbance value of 0.374 to calculate the concentration of the solution:

c = A / (εb) = 0.374 / (1.409 M^-1 cm^-1 x 1.00 cm) = 0.265 M

to know more about absorbance refer here:

https://brainly.com/question/30723190#

#SPJ11

Collagen is both intramolecularly and intermolecularly linked by covalent cross-links.

A fibrous protein known as collagen is made up of three polypeptide chains that are entangled in a triple helix configuration. Between the amino acid residues in each chain, hydrogen bonds hold these chains together intramolecularly.

The structural stability and tensile strength of collagen fibres are provided by covalent bonds, specifically by crosslinks originating from lysine, which are formed between collagen molecules. Enzymatic crosslinking, which involves the oxidation of lysine residues by enzymes like lysyl oxidase, is the process by which these crosslinks are produced.

For tissues like skin, bones, and cartilage to remain intact, covalent interactions between adjacent collagen molecules form a solid, insoluble network of fibres.

To know more about the collagen refer here :

https://brainly.com/question/30161175#

#SPJ11

Answer:  1. 0.120 mol NaCl

Explanation: 1. Solution: n = 0.300 L soln × (0.400 mol NaCl/1 L soln) = 0.120 mol NaCl

Explanation:

To determine the number of molecules of hydrochloric acid (HCl) needed to produce 1.50 liters of hydrogen gas (H2) in the given reaction, we need to first convert the volume of hydrogen gas to the number of moles using the ideal gas law, and then use the balanced chemical equation to determine the stoichiometry between HCl and H2.

Step 1: Convert liters of hydrogen gas to moles using the ideal gas law.

The ideal gas law is given by:

PV = nRT

where:

P = pressure of the gas

V = volume of the gas

n = number of moles of the gas

R = ideal gas constant

T = temperature of the gas

Since the pressure, temperature, and ideal gas constant are not provided in the question, we cannot perform this conversion without this information.

Step 2: Use the balanced chemical equation to determine the stoichiometry between HCl and H2.

The balanced chemical equation for the reaction between hydrochloric acid (HCl) and zinc (Zn) is:

2 HCl + Zn → ZnCl2 + H2

From the balanced chemical equation, we can see that 2 moles of HCl are required to produce 1 mole of H2.

Step 3: Multiply the stoichiometric ratio between HCl and H2 by the number of moles of H2 calculated in step 1 to find the number of moles of HCl needed.

Since we cannot perform step 1 without the necessary information, we cannot accurately determine the number of molecules of hydrochloric acid needed to produce 1.50 liters of hydrogen gas. We would need to know the pressure, temperature, and ideal gas constant in order to perform the conversion from liters to moles and determine the required amount of HCl

The chemical reaction in which lithium hydroxide and hydrogen is an example of a single replacement reaction.

A single replacement reaction, also goes by the name "single displacement reaction" and it is a type of a reaction wherein one element in a compound is swapped with another element. For example:

AC + B → A + BC

Because of the production of a new bond in the products, single replacement reactions are often exothermic. This means that single-replacement reactions generate energy rather than consuming it (as in endothermic reactions).

   Only when the more reactive element replaces the less reactive element can single-replacement reactions occur.

The reactivity of the metals can be obtained from the table of activity series of metals.

Learn more about single replacement reactions here:

https://brainly.com/question/31311955

#SPJ1

The maximum amount of strong base that can be added to the buffer without significantly changing the pH is 0.35 mol.

What is Sodium Carbonate?

Sodium carbonate ([tex]Na_{2}[/tex][tex]CO_{3}[/tex]) is a white, odorless powder that is commonly used in various applications such as in the manufacture of glass, soaps and detergents, water softening, and as a food additive. It is an ionic compound made up of sodium cations (Na+) and carbonate anions ([tex]CO_{3}[/tex] 2-). It is also known as washing soda, soda ash, or sal soda.

Number of moles of NaH[tex]CO_{3}[/tex] = 0.35 mol

To calculate the initial pH of the buffer, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pKa is the acid dissociation constant of the weak acid in the buffer (in this case, carbonic acid, [tex]H_{2}[/tex][tex]CO_{3}[/tex]), [A-] is the concentration of the conjugate base (in this case, bicarbonate ion, H[tex]CO_{3}[/tex]-), and [HA] is the concentration of the weak acid (in this case, carbonic acid, [tex]H_{2}[/tex][tex]CO_{3}[/tex]).

The pKa of carbonic acid is 6.35, and the concentrations of H[tex]CO_{3}[/tex]- and [tex]H_{2}[/tex][tex]CO_{3}[/tex] can be calculated using the initial amounts of NaH[tex]CO_{3}[/tex]  and Na2[tex]CO_{3}[/tex]and the stoichiometry of the reaction:

[H[tex]CO_{3}[/tex]-] = [NaH[tex]CO_{3}[/tex]] = 0.35 mol / (0.35 mol + 0.50 mol) = 0.411 M

[[tex]CO_{2}[/tex] = [[tex]H_{2}[/tex][tex]CO_{3}[/tex]] = [NaH[tex]CO_{3}[/tex]] - [H[tex]CO_{3}[/tex]-] = 0.35 M - 0.411 M = -0.061 M

(Note: The negative concentration of [tex]CO_{2}[/tex] is due to the fact that it is in equilibrium with dissolved carbon dioxide gas, which can escape from the solution.)

Plugging these values into the Henderson-Hasselbalch equation, we get:

pH = 6.35 + log(0.411 / (-0.061))

pH = 9.17

Learn more about Sodium Carbonate

https://brainly.com/question/31016310

#SPJ1

The elements are the present in this mixture is the A and D. The correct option is 1.

The bright line spectrum that is produced by the four elements with the are in the below picture. The bright line spectrum is the spectrum when created is when the beam of the light passes through the sample that is analyte sample that is some of the wavelengths of the light that are absorbed through the atoms with the sample. Thus, the electrons in the atoms will get to the excited state.

Therefore, the bright line spectrum of the mixture formed by the two elements are A and the D. The option 1 is correct.

To learn more about elements here

https://brainly.com/question/30263942

#SPJ4

For each reaction in Model 2, predict the number of electrons that must be involved in the reaction to make the charges in the reaction balance. Two electrons are required to balance the +2 charge on the reactant's side of the equation.

Reaction balance refers to the balancing of the number of reactant and product species in a chemical reaction, such that the total charge and total mass are conserved. This is achieved by adjusting the stoichiometric coefficients of each species in the chemical equation. In addition to balancing the mass of the species, it is also important to balance the charge in the reaction.

Learn more about electrons

https://brainly.com/question/1255220

#SPJ4

The total number of functional groups present in the glyceraldehyde molecule is 2, which includes the aldehyde group and two hydroxyl groups. The correct option is D.

The given molecule, glyceraldehyde, has three carbon atoms and one aldehyde functional group (-CHO) attached to the terminal carbon. The other two carbon atoms have hydroxyl (-OH) groups attached to them.

Functional groups are groups of atoms that give a molecule its characteristic chemical properties and reactivity.

They are responsible for the formation of various biomolecules, including carbohydrates, proteins, and lipids. In the case of carbohydrates, functional groups include aldehydes, ketones, and hydroxyl groups.

Glyceraldehyde is a simple sugar that serves as the backbone for more complex carbohydrates such as glucose and fructose.

Understanding the functional groups present in glyceraldehyde is crucial for understanding its reactivity and the reactions it undergoes in biological systems.

In conclusion, the molecule glyceraldehyde contains two functional groups: one aldehyde and two hydroxyl groups.

to know more about functional groups refer here:

https://brainly.com/question/29263610#

#SPJ11

Sodium hydroxide dissolves into its ions (hydroxide ions and sodium ions). Because NaOH(s) has a standard enthalpy of dissolution of -44.50 kJ/mol.  25.0 g of NaOH(s) dissolve in water to produce 27.81 kilojoules of heat.

There is always heat production or evolution during a neutralisation reaction. The reaction mixture's temperature is increased by the heat that is evolved.

Enthalpy of neutralising NaOH with H2SO4 under ordinary circumstances is approximately 57.3 KJ per gramme equivalent mass, hence heat is generated when an aqueous solution contains 6.

Heat is emitted when an acid and an alkali react, hence enthalpy changes of neutralisation are always negative.

learn more about neutralisation

https://brainly.com/question/23008798

#SPJ1

The expression for the solubility product constant are

a) Ksp = [Ca²⁺][F⁻]² b) Ksp = [Ag⁺]²[SO₄²⁻]

To write the expression for the solubility product constant (Ksp) for a) Calcium fluoride (CaF2) and b) Silver sulfate (Ag2SO4), you'll need to consider the balanced chemical equations for the dissolution of these compounds in water.

a) For Calcium fluoride (CaF2):
CaF2 (s) ⇌ Ca²⁺ (aq) + 2F⁻ (aq)
The solubility product constant expression for Calcium fluoride is:
Ksp = [Ca²⁺][F⁻]²

b) For Silver sulfate (Ag2SO4):
Ag2SO4 (s) ⇌ 2Ag⁺ (aq) + SO₄²⁻ (aq)
The solubility product constant expression for Silver sulfate is:
Ksp = [Ag⁺]²[SO₄²⁻]

In these expressions, the brackets denote the molar concentrations of the ions at equilibrium, and the exponents correspond to their stoichiometric coefficients in the balanced chemical equation.

To know more about Solubility Product:

https://brainly.com/question/1419865

#SPJ11

The anthropogenic greenhous gas among the options is option (E) [tex] CCl_{2}[/tex][tex] F_{2}[/tex].

The compound [tex] CCl_{2}[/tex][tex] F_{2}[/tex] is the chemical formula for chlorofluorcarbons, commonly referred to as CFCs. Anthropogenic substances are the manmade elements that do not exist naturally. CFCs have been started manufacturing in 1930s, post which there concentration increased in the atmosphere.

The gas finds multiple applications such as in blowing agens, refrigerators, air conditioners, packaging materials, solvents and propellants. These have been associated with damage to environment with regulations being formulate to monitor their production and release.

Learn more about CFCs -

https://brainly.com/question/1122852

#SPJ4

The complete question is -

(A)[tex] H_{2}O[/tex] (B) [tex] CO_{2}[/tex] (C) [tex] CH_{4}[/tex] (D) [tex] O_{3}[/tex] (E) [tex] CCl_{2}[/tex][tex] F_{2}[/tex]

A greenhouse gas that is exclusively anthropogenic is

option A

option B

option C

option D

option E

The most abundant nonanthropogenic greenhouse gas is (A) H2O, also known as water vapor. While (B) CO2, (C) CH4, (D) O3, and (E) CCl2F2 are all greenhouse gases, water vapor is the most abundant and naturally occurring greenhouse gas in the Earth's atmosphere.

The most abundant greenhouse gas overall, water vapor differs from other greenhouse gases in that changes in its atmospheric concentrations are linked not to human activities directly, but rather to the warming that results from the other greenhouse gases we emit. Warmer air holds more water.

To know more about greenhouse gases :

https://brainly.com/question/14131369

#SPJ11

a.) The pH of a solution made by dissolving 450 mg of HBr in enough water to make 100 ml of solution is 1.68. b.) The pH of a solution made by dissolving 525 mg of Ba(OH)₂ in enough water to make 75 ml of solution is 13.17.

a) HBr is a strong acid, meaning it dissociates completely in water to produce H⁺ ions and Br⁻ ions. The concentration of H⁺ ions in a solution of HBr can be calculated using the formula pH = -log[H⁺], where [H⁺] is the concentration of H⁺ ions in moles per liter (M).

To calculate the concentration of H⁺ ions in the given solution, we first need to convert the mass of HBr to moles using its molar mass. The molar mass of HBr is 80.91 g/mol, so 450 mg of HBr corresponds to 0.00556 moles. The volume of the solution is 100 ml or 0.1 L.

Using the formula for concentration, we can calculate the concentration of H⁺ ions as [H⁺] = moles of HBr / volume of solution = 0.00556 moles / 0.1 L = 0.0556 M.

Finally, we can calculate the pH of the solution as pH = -log(0.0556) = 1.68.

b) Ba(OH)₂ is a strong base that dissociates completely in water to produce Ba²⁺ ions and OH⁻ ions. The concentration of OH⁻ ions in a solution of Ba(OH)₂ can be calculated using the formula pOH = -log[OH⁻], where [OH⁻] is the concentration of OH⁻ ions in moles per liter (M).

To calculate the concentration of OH⁻ ions in the given solution, we first need to convert the mass of Ba(OH)₂ to moles using its molar mass. The molar mass of Ba(OH)₂ is 171.34 g/mol, so 525 mg of Ba(OH)₂ corresponds to 0.00306 moles. The volume of the solution is 75 ml or 0.075 L.

Since Ba(OH)₂ dissociates into two OH⁻ ions per formula unit, the concentration of OH⁻ ions in the solution is twice the concentration of Ba(OH)₂, or [OH⁻] = 2 × moles of Ba(OH)₂ / volume of solution = 2 × 0.00306 moles / 0.075 L = 0.0816 M.

Finally, we can calculate the pOH of the solution as pOH = -log(0.0816) = 1.08. To convert this to pH, we use the relationship pH + pOH = 14, giving us pH = 14 - 1.08 = 13.17.

To know more about pH of a solution, refer here:
https://brainly.com/question/1625945#
#SPJ11

If ΔGo for a reaction is equal to 0, then the reaction is in equilibrium and the equilibrium constant (K) must be equal to 1.

Hi, if ΔGo for a reaction is equal to 0, the equilibrium constant (K) for the reaction must be equal to 1. This means that the rate of the forward reaction is equal to the rate of the reverse reaction, resulting in no net change in the concentrations of the reactants and products over time.

This is because the relationship between ΔGo and K is given by the equation:

ΔGo = -RT ln(K)

Where:
ΔGo = standard Gibbs free energy change
R = gas constant (8.314 J/mol·K)
T = temperature in Kelvin
ln(K) = natural logarithm of the equilibrium constant

When ΔGo is equal to 0, the equation becomes:
0 = -RT ln(K)

To solve for K, we can rearrange the equation:
ln(K) = 0

Taking the inverse natural logarithm (exponential) of both sides:
K = e^0

Since e^0 is equal to 1, K must be equal to 1. This means that the reaction is at equilibrium, with the concentrations of reactants and products remaining constant over time.

To know more about Equilibrium:

https://brainly.com/question/10748320

#SPJ11

After the spectator ions are eliminated, the species should be used when we balancing the equation for the redox reaction is H₂O (l), CO₂, Mn²⁺(aq), MnO₄⁻ (aq), C₂O₄²⁻, H⁺.

The chemical equation is as :

KMnO₄ (aq) + Na₂C₂O₄ (aq) + H₂SO₄ (aq) → MnSO₄ (aq) + K₂SO₄ (aq) + Na₂SO₄ (aq) + CO₂ (g)+ H₂O (l)

For the oxidation-reduction reactions that is the redox reaction in the acidic conditions, after the balancing the atoms and the oxidation numbers, the one will then need to add the H⁺ ions and to balance the hydrogen ions that is in the half reaction.

The spectators ions are the ions that do not participate in the chemical reactions and it will present the same that is on the both sides of the reactions.

To learn more about spectator ions here

https://brainly.com/question/10097640

#SPJ4

This question is incomplete, the complete question is :

After spectator ions are eliminated, which of the listed species should be used when balancing the equation for the following redox reaction? Select all that apply.KMnO4 (aq) + Na2C2O4 (aq) + H2SO4 (aq) → MnSO4 (aq) + K2SO4 (aq) + Na2SO4 (aq) + CO2 (g)+ H2O (l).

H₂O (l), CO₂, Mn²⁺(aq), MnO₄⁻ (aq), C₂O₄²⁻, H⁺.

The correct answer is (b) scrubbing.

The process of removing sulfur from gases emitted from power plants that burn coal is called scrubbing.

The process of removing sulfur from gases emitted from power plants that burn coal is called ""scrubbing."" Coal is a fossil fuel that contains sulfur compounds, which, when burned, can produce sulfur dioxide (SO2) emissions. These emissions can have negative environmental impacts, such as contributing to acid rain and smog formation.

Scrubbing is a method used to remove these sulfur compounds from the exhaust gases produced by burning coal. The process involves passing the exhaust gases through a chemical solution that reacts with the sulfur compounds, converting them into a solid or liquid form that can be removed from the gas stream.

The most common type of scrubbing used in coal-fired power plants is called ""wet scrubbing."" In wet scrubbing, the exhaust gases are passed through a liquid solution, typically made up of water and a chemical reagent such as limestone or lime. The sulfur compounds react with the reagent, forming solid or liquid byproducts that can be removed from the gas stream.

Click the below link, to learn more about Scrubbing of coal:

https://brainly.com/question/30042938

#SPJ11"

No, an optically inactive compound cannot rotate plane-polarized light.

A compound's capacity to rotate the plane of plane-polarized light is known as optical activity. This happens as a result of the compound's chiral core, which means that its mirror image cannot be superimposed. Enantiomers are the mirror images of chiral compounds that rotate plane-polarized light in opposing directions. The type of chemical and the light's wavelength affect how much spinning occurs.

A compound that is optically inactive, on the other hand, either lacks a chiral center or has an equal number of chiral centers with opposing configurations, making it possible to superimpose the molecule with its mirror copy. Optically inert substances do not spin plane-polarized light because there is no distinction between the substance and its mirror image.

It is significant to remember that some substances, despite having chiral centers, may look optically inactive. This is due to the possibility that the compound contains an equal amount of both enantiomers, whose competing optical activities cancel one another out. These substances, often known as racemic mixes or racemates, don't rotate plane-polarized light.

In conclusion, optically inactive chemicals lack chiral centers or have an equal number of chiral centers with opposing configurations, which prevents them from rotating plane-polarized light.

To know more about the optically inactive compound refer here :

https://brainly.com/question/29090133#

#SPJ11