how many sulfur atoms are in 2.27 mol of S8 molecules?

When Q > Ksp and a precipitate will form for the Ksp of AgCl at 25°C is 1.6 x [tex]10^{-10}[/tex]. Option B is the correct answer.

The problem involves calculating the ionic product (Q) of a solution of [tex]CaCl_2[/tex] and [tex]AgNO_3[/tex] and comparing it with the solubility product (Ksp) of AgCl.

If Q is greater than Ksp, it indicates that the concentrations of [tex]Ag^+[/tex] and [tex]Cl^-[/tex] ions in the solution are higher than the maximum solubility product of AgCl at that temperature and a precipitate will form.

In this case, Q is calculated to be 1.0 x [tex]10^{-5}[/tex], which is higher than the Ksp of AgCl (1.6 x [tex]10^{-10}[/tex]) at 25°C.

Thus, the answer is B - a precipitate of AgCl will form in the solution.

Learn more about the precipitate formation at

https://brainly.com/question/31581110

#SPJ4

The question is -

The Ksp of AgCl at 25°C is 1.6 x 10^{-10}. Consider a solution that is 1.0 x 10^{-7} M CaCl_2 and 1.0 x 10-3 M AgNO_3.

A. Q > Ksp and a precipitate will not form.

B. Q > Ksp and a precipitate will form.

E_cathode is the reduction potential of the cathode, and E_anode is the reduction potential of the anode.

Calculate the anode from your measured voltage reading and the reduction potential of each metal,

Follow these steps:

Learn more about Anode voltage and reduction potential

brainly.com/question/28236349

#SPJ11

The alpha helix is very stable due to several factors:

1. Hydrogen bonding: In an alpha helix, each peptide bond's carbonyl oxygen forms a hydrogen bond with the amide hydrogen of another peptide bond four residues away. This regular pattern of hydrogen bonding contributes to the stability of the helix.

2. Steric interactions: The amino acid side chains in an alpha helix are positioned on the outside of the helix, preventing steric clashes and allowing for optimal packing of the protein structure.

3. Van der Waals forces: The close proximity of amino acid side chains in the alpha helix allows for attractive van der Waals forces to stabilize the helical structure.

4. Electrostatic interactions: In some cases, positively charged and negatively charged side chains can be positioned optimally to form stabilizing electrostatic interactions within the alpha helix.

These factors together contribute to the stability of the alpha helix structure in proteins.

To know more about helix refer here:

https://brainly.com/question/30506786#
#SPJ11

The general features of a lead-acid battery include a negative electrode made of spongy lead, a positive electrode made of lead dioxide, and an electrolyte solution of sulfuric acid, with a reversible chemical reaction that allows for the storage and release of energy.

Lead-acid batteries are one of the most commonly used types of batteries due to their cost-effectiveness and ability to produce high levels of power. The general features of a lead-acid battery include a negative electrode made of spongy lead, a positive electrode made of lead dioxide, and an electrolyte solution of sulfuric acid. The acid in the battery plays a crucial role in the chemical reaction that occurs within the battery. When the battery is charged, lead sulfate forms on both the negative and positive electrodes, and the sulfuric acid is converted into water. When the battery is discharged, the lead sulfate is converted back into lead and lead dioxide, and the water is converted back into sulfuric acid. This reaction is reversible, making lead-acid batteries ideal for use in applications where a high level of power is needed. Additionally, lead-acid batteries are known for their ability to store a large amount of energy in a relatively small space, making them an ideal choice for use in automobiles, boats, and other vehicles.

Learn more about electrode : https://brainly.com/question/17362810  

#SPJ11

Reducing benzil can lead to multiple products, and finding the mixture melting point helps in determining the purity of the sample.

A narrow, consistent melting point indicates a pure compound, while a broader, lower melting point suggests a mixture.

To reduce benzil, a chemical reaction is required, typically involving the addition of a reducing agent such as sodium borohydride ([tex]NaBH_4[/tex]) or lithium aluminium hydride ([tex]LiAlH_4[/tex]).

The reduction process converts the carbonyl group of benzil into an alcohol or a hydroxyl group.

When multiple products are formed during the reduction of benzil, it is essential to determine the melting point of the mixture to assess its purity.

The melting point of a pure compound is usually sharp, while a mixture of compounds exhibits a broader melting point range, which is generally lower than the melting point of the individual pure components.

To find the mixture melting point, follow these steps:

1. Prepare a small sample of the mixture on a glass capillary tube.

2. Insert the capillary tube into a melting point apparatus.

3. Gradually increase the temperature and observe the temperature range where the mixture starts to melt and completely liquifies.

4. Record the temperature range and compare it to the known melting points of the individual components.

Based on the observed melting point range, you can determine if your sample is a mixture or a pure compound.

If the melting point range is narrow and close to the known value of one of the products, your sample is likely pure.

If the melting point range is broad and lower than the expected values, it suggests that your sample is a mixture of products.

In summary, reducing benzil can lead to multiple products, and finding the mixture melting point helps in determining the purity of the sample.

A narrow, consistent melting point indicates a pure compound, while a broader, lower melting point suggests a mixture.

To know more about Reducing benzil refer here:

https://brainly.com/question/31587726#

#SPJ11

Molality is defined as the "moles solute/kg solvent." Therefore, the correct option is (b).

What is Molality?

Molality (m) is a measure of the concentration of a solute in a solution, and is defined as the number of moles of solute per kilogram of solvent.

The equation for molality is:

m = moles of solute / mass of solvent in kg

Concentration is the ability to focus one's attention and mental effort on a specific task or activity. It involves filtering out distractions and staying attentive to the task at hand. The level of concentration can vary depending on the person, the task, and the environment.

To know more about Molality :

https://brainly.com/question/30640726

#SPJ11

TLC plates should be stored in a cool and dry place away from direct sunlight and any potential sources of chemical contamination. This is because TLC plates are made of a thin layer of adsorbent material that can easily be affected by moisture, temperature, and exposure to chemicals.

If TLC plates are not stored properly, their adsorbent layer may become contaminated or degraded, leading to inaccurate or inconsistent results.

For example, exposure to moisture can cause the adsorbent layer to swell, making it less effective at separating compounds.

Similarly, exposure to chemicals can cause the adsorbent layer to break down or react, altering the separation properties of the plate.

In short, proper storage of TLC plates is crucial to ensuring accurate and reliable results in chromatography experiments.

To know more about TLC plates, refer here:

https://brainly.com/question/17562109#

#SPJ11

A sample of PCl₃ gas occupies 652 mL at 998 kPa at 33°C. If the sample is transferred to a 500 mL flask at 33 °C, the gas pressure in the flask will be 831.3 kPa. This is using ideal gas equation.

The equation of state for a fictitious perfect gas is known as the ideal gas law, sometimes known as the generic gas equation. Although it has some restrictions, it is a good approximation of the behavior of numerous gases under various circumstances. Benoît Paul Émile Clapeyron introduced it for the first time in 1834 as a synthesis of the empirical Boyle's law, Charles' law and Avogadro's law.The empirical form of the ideal gas law is frequently used:

PV = nRT

Using the ideal gas law (PV = nRT), we can solve this problem.

Calculate the number of moles of gas:

n = (998 kPa x 652 mL) / (8.31 J/mol x K x 33 °C)

n = 0.596 moles

Calculate the pressure in the new flask:

P₂ = (n x 8.31 J/mol x K x 33 °C) / 500 mL

P₂ = 831.3 kPa

To know more about Boyle's law, visit:

https://brainly.com/question/30367067

#SPJ1

One of the main problems is that many drying agents do not only absorb water, but also other polar compounds. Hence, an excess of drying agent should be avoided in order to prevent the absorption of the target compound, particularly if the compound was polar as well.

pH can influence the protonation states of amino acids by affecting the ionizable groups, with low pH favoring protonation and high pH favoring deprotonation. This can impact the overall charge and properties of the amino acids.

pH influences the protonation states of amino acids by affecting their ionizable groups, which are the carboxyl group (COOH) and the amino group (NH2). These groups can gain or lose protons (H+) based on the pH of the surrounding environment.

Here's a step-by-step explanation:

1. At low pH (acidic conditions), there is a high concentration of protons (H+). The ionizable groups on amino acids will tend to accept protons, resulting in the carboxyl group being protonated (COOH) and the amino group being protonated (NH3+).

2. At neutral pH, the carboxyl group will be deprotonated (COO-) and the amino group will be protonated (NH3+). This state is called a zwitterion.

3. At high pH (alkaline conditions), there is a low concentration of protons (H+). The ionizable groups on amino acids will tend to lose protons, resulting in the carboxyl group being deprotonated (COO-) and the amino group being deprotonated (NH2).

To know more about pH:

https://brainly.com/question/4679991

#SPJ11

The ∆Sof of C₂H₄(g) is 219.6J/(mol K). and for N₂O(g) is

219.5 J/(mol K). for sodium chloride(s) is 72.1 J/(mol K) and for CaSO₄∙2H₂O(s) is 276.5 J/(mol K) and for HC₂H₃O₂(l) is 159.2 J/(mol K).

a. For C₂H₄(g), we can use the standard molar entropy of ethylene gas, which is 219.6 J/(mol K). Therefore, ΔS for C₂H₄(g) is 219.6 J/(mol K).

b. For N₂O(g), we can use the standard molar entropy of nitrous oxide gas, which is 219.5 J/(mol K). Therefore, ΔS for N₂O(g) is 219.5 J/(mol K).

c. For NaCl(s), we can use the standard molar entropy of sodium chloride crystal, which is 72.1 J/(mol K). Therefore, ΔS for NaCl(s) is 72.1 J/(mol K).

d. For CaSO₄∙2H₂O(s), we need to consider the entropies of the individual components. The standard molar entropy of CaSO₄(s) is 136.7 J/(mol K), and the standard molar entropy of H₂O(l) is 69.9 J/(mol K). We also need to account for the two moles of water in the compound, so we multiply the entropy of H₂O(l) by 2. Therefore, the total standard molar entropy of CaSO₄∙2H₂O(s) is 276.5 J/(mol K). Therefore, ΔS for CaSO₄∙2H₂O(s) is 276.5 J/(mol K).

e. For HC₂H₃O₂(l), we can use the standard molar entropy of acetic acid liquid, which is 159.2 J/(mol K). Therefore, ΔS for HC₂H₃O₂(l) is 159.2 J/(mol K).

learn more about entropy here:

https://brainly.com/question/17176334?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

Pyrimidines are 6-membered heterocyclic aromatic rings with the general formula of [tex]C_4H_4N_2[/tex]. While Purines are heterocyclic aromatic rings that consist of two rings (pyrimidine and imidazole) fused together. The general formula of purines is [tex]C_5N_4H_4[/tex].

Pyrimidine is an aromatic ring compound consisting of two nitrogen atoms and four carbon atoms. The carbon and nitrogen atoms are connected via double and single bonds. The hydrogen atoms are bonded to each carbon atom through a single bond. Examples of Pyrimidine bases are Uracil, Thymine, and Cytosine

Basic purine has nine atoms in its structure. Purine has two cyclic structures fused together which are a six-membered pyrimidine ring and a five-membered imidazole ring. Examples of Purine bases include Adenine and Guanine.

The structures of both nitrogenous bases are shown in the attached image.

Learn more about Purine:

https://brainly.com/question/29606440

#SPJ4

It is important to consider shedding when assessing the potential risks associated with biohazard experiments involving research animals, and to take appropriate precautions to minimize the risk of exposure to these hazards.True.

Shedding of biohazards from research animals is an important factor to consider when evaluating the risk of conducting experiments involving these animals.

Biohazards are infectious agents or biological materials that can pose a threat to human health, animal health, or the environment. The risk of exposure to biohazards can be influenced by a variety of factors, including the route of transmission and the amount of the infectious agent or biological material present.

Shedding refers to the release of infectious agents or biological materials from animals into the environment, which can increase the risk of exposure to these hazards.

For such more questions on Biohazards:

https://brainly.com/question/16170111

#SPJ11

Using significant figures 0.00296 moles of helium can be calculated to be contained in the balloon.

You might have learnt in school that at STP (Standard Temperature and Pressure), the temperature is 273.15 K and the pressure is 1 atm. The molar volume of any given gas at STP will always be 22.4 L/mol. This will perhaps be known to you as Avogadro's Law.

You are having 75.000 mL of helium, which is 0.075 L. To find the number of moles of helium, you will make use of the ideal gas law:

PV = nRT

The notations are commonly known as P for pressure, V for volume, n is for number of moles, R for gas constant, and T for temperature in Kelvin scale.

At STP, P = 1 atm and T = 273.15 K. The gas constant R is 0.08206 L·atm/mol·K.

So you will then have:

n = PV/RT = (1 atm)(0.075000 L)/(0.08206 L·atm/mol·K)(273.15 K)

n = 0.00296 mol

Using significant figures, you can then round this to three significant figures:

n = 0.00296 mol

The numbre of moles is 0.00296. This is your final answer.

Learn more about Avogadro's Law here:

https://brainly.com/question/31216850

#SPJ1

True. The limiting reactant is the substance that gets completely consumed in a chemical reaction, limiting the amount of product that can be formed. It is determined by comparing the mole ratios of the reactants in the balanced chemical equation.

If a reactant is present in excess, it will not get completely consumed, and therefore, will not be the limiting reactant. On the other hand, if a reactant is present in an insufficient amount, it will be the limiting reactant, and the reaction will stop when it gets completely consumed.

Since the product side of the chemical equation represents the substances that are formed after the reaction, it is not possible for any of them to be the limiting reactant. Therefore, it is true that the limiting reactant can never be a chemical on the product side of the equation.

To know more about  limiting reactant, refer here:

https://brainly.com/question/14225536#

#SPJ11

If the concentrations of the acid and conjugate base in buffer are equal, then pH of a solution (c) it will be equal to the pKa of the acid.

pH is a measure of the acidity or basicity of a solution and is defined as the negative logarithm (base 10) of the concentration of hydrogen ions (H+) in solution.

Any solution with pH of 7 is considered neutral, while pH less than 7 indicates an acidic solution and pH greater than 7 indicates a basic solution. For example, any solution with a pH of 4 has higher concentration of hydrogen ions and is more acidic than solution with a pH of 6.

To know more about pH, refer

https://brainly.com/question/172153

#SPJ1

Answer:

Explanation:

Here are two observations that could be made during the reaction:

The magnesium metal will fizz and dissolve. This is because the hydrogen gas is being released, which causes the magnesium metal to fizz and dissolve.

A gas will be produced. This gas is hydrogen gas, which is colorless and odorless. It can be detected by holding a burning splint near the reaction vessel. If the splint ignites, then hydrogen gas is present.

Here are some additional details about the reaction:

When the concentration of F- exceeds 9.8 × 10-5 M, BaF2 will precipitate. The correct answer is (b).

To answer this question, we need to use the Ksp expression for BaF2:

Ksp = [Ba2+][F-]^2.

We know the initial concentration of Ba2+ is 0.0173 M, and we are adding NaF dropwise to this solution. As we add NaF, the concentration of F- will increase, and at some point, it will exceed the solubility product of BaF2 (1.7×10-6) and BaF2 will start to precipitate.

Let x be the concentration of F- added (in M). When BaF2 starts to precipitate, [Ba2+] and [F-] will both decrease by x (since they are consumed in the precipitation reaction). Thus, at equilibrium, we will have:

Ksp = (0.0173 - x)(x)^2
x = 9.8 × 10-5 M

Therefore, when the concentration of F- exceeds 9.8 × 10-5 M, BaF2 will precipitate.

To know more about Ksp expression click here:

https://brainly.com/question/29557204

#SPJ11

The mass of 8.00 × 10 molecules of NH₃ is approximately 0.226 g, which is closest to option C) 2.26 g.

To determine the mass of  8.00 × 10²² molecules of NH₃, follow these steps:

1. First, find the molar mass of NH₃. The molecular formula is NH₃, which means there is one nitrogen atom (N) and three hydrogen atoms (H). The molar mass of nitrogen is 14.01 g/mol, and the molar mass of hydrogen is 1.01 g/mol. So, the molar mass of NH₃ is (14.01 + 3 × 1.01) g/mol = 17.03 g/mol.

2. Next, we need to convert the number of molecules to moles using Avogadro's number (6.022 × 10²³ molecules/mol). Divide the given number of molecules by Avogadro's number:
( 8.00 × 10²² molecules) / (6.022 × 10²³ molecules/mol) = 0.0133 moles.

3. Finally, multiply the number of moles by the molar mass of NH₃ to find the mass:
(0.0133 moles) × (17.03 g/mol) = 0.226 g.

To know more about the mass refer here :

https://brainly.com/question/31300696#

#SPJ11

The name for KHSO₃ is D) potassium bisulfite.

The elements potassium (K), hydrogen (H), sulphur (S), and oxygen (O) make up the chemical compound KHSO₃. One potassium ion (K+) and one hydrogen sulfite ion (HSO3-) are represented by its chemical formula.

This compound's naming follows inorganic chemistry norms. The term "bisulfite" in the compound's name denotes the existence of the hydrogen sulfite ion, while the prefix "potassium" denotes the presence of the potassium ion.

The name's prefix "bi-" denotes the presence of two hydrogen atoms bound to the sulfite ion in the molecule. One Sulphur atom, three oxygen atoms, and one hydrogen ion combine to form the sulfite ion, which has a -1 charge.

Potassium bisulfite is the proper name for KHSO₃ since it appropriately describes the ion makeup and charge of the molecule.

To know more about the potassium bisulfite refer here :

https://brainly.com/question/31384813#

#SPJ11

Answer: Symbol

Explanation:

basic chem

One of the most important organic compounds whose chemical formula is C₆H₆ and it is the parent compound of the various aromatic compounds is defined as the benzene. It is immiscible in water but soluble in organic solvents.

Benzene forms the following products on reaction with the given reagents:

1. Benzene reacts with halogens like Br₂, Cl₂ in the presence of Lewis acids such as FeCl₃, FeBr₃ to form aryl halides. This reaction is known as the halogenation of benzene.

2. Benzene undergoes Friedel-Crafts acylation when it is treated with acyl chloride in the presence of Lewis acid like AlCl₃ to form Acetophenone as the product. It is an electrophilic aromatic substitution reaction.

To know more about benzene, visit;

https://brainly.com/question/31321675

#SPJ4

In terms of increasing heat of combustion per -CH2 group, the ranking would be:
cyclohexane < cyclooctane < cyclobutane < cyclopropane

N2 is a very stable molecule because it has a triple bond between the nitrogen atoms which requires a lot of energy to break. As a result, N2 has a very low heat of combustion because it does not readily react with other substances.

This is because cyclohexane and cyclooctane have more stable conformations due to their ring structure, which means that less energy is required to break the C-H bonds. On the other hand, cyclopropane has a strained ring structure which makes its C-H bonds weaker and more reactive, resulting in a higher heat of combustion per -CH2 group.

For more such questions on increasing heat of combustion,

brainly.com/question/29007644

#SPJ11

When CpG dinucleotides are present in DNA, the DNA methyltransferase enzyme Dnmt3a catalyses the movement of a methyl group form S-adenosyl methionine (or SAM for to the 5-carbon site of the the cytosine ring.

Depending on their electrical structure, rings can either be aromatic or not. A ring's size can also range from three to as many atoms. Numerous organic compounds have rings, which are significant structural components that are essential when assessing the chemical and physical properties associated with these molecules.

A collection of two or more elements that are chemically linked together constitutes a molecule. These atoms may be composed of many elements or of the same element. The fundamental building blocks of chemical substances are molecules.

To know more about molecules visit:

https://brainly.com/question/28931982

#SPJ1

Ultrasound can be used as a tool to enhance the reaction rate and yield in a Grignard reaction. Some of the benefits of ultrasound to a Grignard reaction are:

Accelerated reaction rate: Ultrasonic waves generate acoustic cavitation bubbles that collapse and create high energy hotspots, resulting in localized heating and pressure waves. These cavitation bubbles can lead to the formation of free radicals or other reactive species, which can accelerate the Grignard reaction rate. This can result in faster reaction times and higher yields.

Improved mixing: Ultrasonic waves also create microstreaming and turbulence within the reaction mixture, which can enhance the mixing of reactants and improve the homogeneity of the reaction. Improved mixing can lead to better mass transfer and more efficient collisions between reactant molecules, which can further enhance the reaction rate and yield.

Reduced reaction time: The use of ultrasound in a Grignard reaction can reduce the reaction time, as the high-energy cavitation bubbles can accelerate the reaction. This can result in faster reaction times, which can be particularly advantageous for large-scale reactions.

Improved selectivity: Ultrasound can also improve the selectivity of the Grignard reaction by promoting the formation of the desired product and suppressing the formation of unwanted byproducts. This is likely due to the enhanced mixing and localized heating that occurs during ultrasonic irradiation.

Learn more about Ultrasound

https://brainly.com/question/30363405

#SPJ4

Answer:

The correct answer is (d) AuPO3 as it does not contain any gold in its chemical formula.

Explanation:

The correct answer is (d) AuPO3 as it does not contain any gold in its chemical formula.

(a) Au(NO3)3 contains 79.9% gold by weight

(b) Au(OH)3 contains 89.8% gold by weight

(c) AuF3 contains 69.5% gold by weight.

Answer:

The correct answer is option d. AuPO3.Gold content by weight:

a. Au (NO3)3 = 69.94%

b. Au (OH)3 = 89.07%

c. AuF3 = 69.96%

d. AuPO3 = 42.55%

AuPO3 has the lowest percent Gold content by weight, as only 42.55% of its weight is attributed to Gold.

Explanation:

The correct answer is option d. AuPO3.

AuPO3 has the lowest percent Gold content by weight, as only 42.55% of its weight is attributed to Gold. The other options, Au(NO3)3, Au(OH)3, and AuF3 have higher percent Gold content by weight than AuPO3.

The amount of cross-linking in tissue increases with age. Cross-linking refers to the process where proteins in the tissue are chemically linked together, resulting in a reduction of the tissue's flexibility and elasticity.

This occurs due to the accumulation of advanced glycation end-products (AGEs) over time, which are formed when sugars react with proteins. These AGEs cause the tissue to become stiff and less functional, which can lead to a range of age-related diseases such as cataracts, cardiovascular disease, and osteoarthritis.

Additionally, cross-linking can impact the effectiveness of medical treatments, such as tissue engineering or drug delivery, as it reduces the tissue's ability to regenerate or respond to therapeutic agents.

Therefore, understanding the mechanisms behind cross-linking is essential for developing effective interventions to mitigate age-related pathologies.

To know more about tissue refer here:

https://brainly.com/question/17664886#

#SPJ11

Without knowing the value of K or Q, we cannot accurately predict the composition of the mixture at equilibrium. However, we can say that the reaction will proceed until it reaches equilibrium, and the final composition of the mixture will depend on the relative values of Q and K.

Based on the given information, we know that the reaction between Br2 and OCl2 is a redox reaction, which means that one of the reactants is oxidized while the other is reduced. At the initial stage, both reactants are present in equal amounts, but as the reaction proceeds, one of the reactants will be consumed while the other will be formed.

At equilibrium, the reaction will reach a state where the rate of the forward reaction is equal to the rate of the reverse reaction. This means that the composition of the mixture in the vessel will no longer change, and the concentrations of Br2 and OCl2 will remain constant.

We can predict the composition of the mixture at equilibrium by calculating the reaction quotient (Q) and comparing it to the equilibrium constant (K). If Q is less than K, then the reaction will proceed in the forward direction, consuming more Br2 and forming more OCl2.

If Q is greater than K, then the reaction will proceed in the reverse direction, consuming more OCl2 and forming more Br2. If Q equals K, then the reaction is at equilibrium.

To know more about equilibrium refer here:

https://brainly.com/question/30807709#

#SPJ11

To create a polyester via condensation polymerization, several chemicals are required. These include a dicarboxylic acid, a diol, and a catalyst.

Dicarboxylic acid is an organic compound that contains two carboxylic acid groups, while a diol is a compound containing two hydroxyl groups. Both of these compounds are necessary to form the ester bond that creates polyester.

Additionally, a catalyst is required to facilitate the reaction between the dicarboxylic acid and diol. Other compounds such as an amine, a diamine, an alcohol, and a carboxylic acid may also be used, but they are not necessary for the reaction to occur.

Overall, the condensation polymerization process requires the combination of at least two compounds containing reactive groups, which form a polymer through a reaction that releases a small molecule such as water.

To know more about polyester refer here:

https://brainly.com/question/11112056#

#SPJ11

The amount of  NH₄Cl need to be added to 1.50 L of 0.400 M ammonia to make a buffer solution with a pH of 8.58 is 38.17 grams.

To calculate how many grams of NH₄Cl need to be added to 1.50 L of 0.400 M ammonia to make a buffer solution with a pH of 8.58, we will use the Henderson-Hasselbalch equation and the Kb for ammonia (1.77 x 10⁻⁵).

First, we need to find the pOH since we are given the pH:

pOH = 14 - pH

= 14 - 8.58

= 5.42

Next, we'll find the pKb using the Kb for ammonia:

pKb = -log(Kb)

= -log(1.77 x 10⁻⁵)

= 4.75

Now we can use the Henderson-Hasselbalch equation:

pOH = pKb + log([NH₄⁺]/[NH₃])

5.42 = 4.75 + log([NH₄⁺]/[0.400])

Rearrange and solve for the [NH₄⁺] concentration:

log([NH₄⁺]/[0.400]) = 5.42 - 4.75

log([NH₄⁺]/[0.400]) = 0.67

[NH₄⁺] = 0.400 × [tex]10^{0.67}[/tex]

≈ 0.477 M

Finally, find the mass of NH₄Cl needed:

grams = moles × molar mass of NH₄Cl

grams = (0.477 M × 1.50 L) × 53.49 g/mol

≈ 38.17 g

Therefore, approximately 38.17 grams of NH₄Cl need to be added to 1.50 L of 0.400 M ammonia to make a buffer solution with a pH of 8.58.

Learn more about buffer solution: https://brainly.com/question/24262133

#SPJ11