How much work would have to be done by a force in moving an electron through a positive potentialdifference of 2.0 x 10^6V?

If an object engaging in simple harmonic motion has its amplitude doubled then the maximum acceleration changes by factor 2.

Simple harmonic motion is a specific kind of periodic motion of a body that arises from a dynamic equilibrium between an inertial force that is proportional to the body's acceleration away from the static equilibrium position and a restoring force on the moving object that is directly proportional to the magnitude of the object's displacement and acts towards the object's equilibrium position. If friction or any other energy dissipation is not present, it leads to an oscillation that is represented by a sinusoid and that lasts indefinitely.

The differential equation for SHM is given by,

[tex]\frac{d^2x}{dt^2} + \sqrt{\frac{k}{m}} x=0[/tex]

where [tex]\frac{d^2x}{dt^2}[/tex] is the acceleration of SHM.

when x = A

[tex]\frac{d^2x}{dt^2} = \omega^{2} A[/tex]

if A = 2A

[tex](\frac{d^2x}{dt^2})' = \omega^{2} 2A[/tex]

[tex](\frac{d^2x}{dt^2})' = 2(\frac{d^2x}{dt^2})[/tex]

Hence acceleration gets doubled if amplitude gets doubled.

To know more about SHM :

brainly.com/question/30404816

#SPJ4.

The direction of the magnetic field at the location of the right wire is into the plane of the page.

To determine the direction of the magnetic field at the location of the right wire, we need to consider the following terms: magnetic field, current, and direction.

Step 1: Identify the direction of the current in the left wire.

The current flows toward the bottom of the page, as stated in the question.

Step 2: Apply the right-hand rule to find the direction of the magnetic field.

Place your right thumb in the direction of the current (downward) and curl your fingers. Your fingers will curl in the direction of the magnetic field.

Step 3: Determine the magnetic field direction at the location of the right wire.

Using the right-hand rule, your fingers will curl in a clockwise direction around the left wire, which means the magnetic field direction at the location of the right wire is directed into the plane of the page.

Learn more about magnetic field:

https://brainly.com/question/7645789

#SPJ11

To make the net force on the particle zero, the third force vector, F3, must be equal and opposite to the vector sum of F1 and F2.

To find the vector sum of F1 and F2, we add their respective x and y components:

Fx = F1x + F2x = (3.0N) - (6.0N) = -3.0N
Fy = F1y + F2y = (-4.0N) + (4.5N) = 0.5N

Therefore, the vector sum of F1 and F2 is F1+F2 = (-3.0N)x^ + (0.5N)y^.

To make the net force zero, the third force vector, F3, must be equal and opposite to F1+F2:

F3 = -(F1+F2)
F3 = -(-3.0N)x^ - (0.5N)y^
F3 = (3.0N)x^ + (0.5N)y^

Therefore, a third force of (3.0N)x^ + (0.5N)y^ would make the net force on the particle zero.

To know more about net force:

https://brainly.com/question/29261584

#SPJ11

When two parallel plates are connected with a voltage source, the electric field E = V / d. Thus, option E-20,000 N/C is correct.

The electric field in the two parallel plate conductors depends on the voltage or potential difference (V) and the distance (d) between the two plates. The electric field between the two plates is 2000 N/C. If the voltage is doubled (V = 2V), and the distance is reduced to 1/5 (d = d/5),then

       Electric field (E) = V / d

                                 = 2V / (d/5)

                                 = 10 (V/d) = 10 ×2

       Electric field (E) =  20,000 N/C

Thus, the ideal solution is E) 20,000 N/C.

Learn more about the Electric field :

https://brainly.com/question/26446532

#SPJ4

The sign of the excess charge on the ground would be positive for a typical thundercloud the bottom of the cloud is negatively charged.

In a typical thundercloud, the bottom of the cloud is negatively charged. When this occurs, it induces an excess charge on the ground. The excess charge on the ground will be opposite in sign to the charge in the cloud. Therefore, the sign of the excess charge on the ground is positive. Every storm cloud has positive power in the upper portion of the cloud, negative power in the lower half, and in many tempests while perhaps not in all there is a concentrated positive charge underneath the super regrettable charge. The droplets and crystals in the air move apart and bump together during the storm. This focuses on making static electrical charges the mists. These clouds have a "plus" and a "minus" end, just like a battery. The cloud's plus, or positive, charges are at the top.

learn more about Thundercloud here

https://brainly.com/question/14626880

#SPJ11

The transmission of the electric fields of light by a polarizing sheet C. Only the components parallel to the polarizing axis of the sheet are transmitted.

A polarizing sheet is a material that selectively transmits light waves based on their orientation. The sheet has a specific polarizing axis, which is a direction in the material that allows certain components of the electric fields of light to pass through. When light encounters a polarizing sheet, it consists of both components parallel and perpendicular to the polarizing axis.

The polarizing sheet only transmits the components of the electric fields of light that are parallel to its polarizing axis. This occurs because the sheet's molecules preferentially absorb the light components that are perpendicular to the polarizing axis, effectively blocking them from passing through. On the other hand, the components parallel to the polarizing axis are allowed to continue without being absorbed.

By transmitting only the parallel components, the polarizing sheet effectively polarizes the light, which means the light waves become more aligned in a single direction. This property of polarizing sheets is useful in various applications, such as reducing glare in sunglasses and improving image clarity in optical instruments. Therefore the correct option is C

Know more about polarizing sheet here:

https://brainly.com/question/15518979

#SPJ11

The torque applied to the toy top is approximately 3.75×10^-3 N·m.

We can use the rotational equivalent of Newton's second law of motion, which states that the net torque applied to an object is equal to the moment of inertia times the angular acceleration:

Στ = Iα

where Στ is the net torque, I is the moment of inertia, and α is the angular acceleration.

We can also use the equation for angular acceleration

α = Δω/Δt

where Δω is the change in angular velocity and Δt is the time interval over which the change occurs.

In this problem, the initial angular velocity is 0 rev/s, the final angular velocity is 15.0 rev/s, and the time interval is 0.800 s. Therefore:

Δω = 15.0 rev/s - 0 rev/s = 15.0 rev/s

Δt = 0.800 s

α = Δω/Δt = 15.0 rev/s / 0.800 s = 18.75 rad/s^2

The moment of inertia of a solid disk is I = 1/2MR^2, where M is the mass and R is the radius. Plugging in the given values, we get:

I = 1/2 (0.100 kg) (0.0200 m)^2 = 2.00×10^-5 kg·m^2

Now we can solve for the torque:

Στ = Iα = (2.00×10^-5 kg·m^2) (18.75 rad/s^2) = 3.75×10^-3 N·m

Therefore, the torque applied to the top is 3.75×10^-3 N·m.

To know more about the Torque, please click on:

https://brainly.com/question/28220969

#SPJ11

The total momentum change of an egg being caught would not differ based on the speed at which it is caught. This is due to the law of conservation of momentum, which states that in a closed system, the total momentum before an event must be equal to the total momentum after the event.

In this case, the system includes both the egg and the catcher. When the egg is falling, it has a certain amount of momentum due to its mass and velocity.

When it is caught, the catcher applies an equal and opposite force, resulting in a change in the egg's momentum. However, the total momentum of the system (egg and catcher) must remain constant.

Thus, the total momentum change would be the same regardless of the speed at which the egg is caught.

It is important to note that this assumes a perfectly closed system with no external forces acting on the egg or catcher. In reality, there may be slight variations due to factors such as air resistance and the force applied by the catcher.

For more such answers on Total Momentum Change

https://brainly.com/question/7538238

#SPJ11

The area of contact between each tire and the ground is approximately 6.77 x 10⁻⁴ m².

To find the area of contact between each tire and the ground, we can use the formula for pressure:

Pressure = Force / Area

We are given the gauge pressure (6.80 x 10⁵ Pa) and the total weight of the rider plus the bike (830 N + 91 N = 921 N). Since the weight is supported equally by the two tires, the force on each tire is half the total weight:

Force on each tire = 921 N / 2 = 460.5 N

Now, we can rearrange the formula to find the area of contact:

Area = Force / Pressure

Substitute the values for force and pressure:

Area = 460.5 N / (6.80 x 10⁵ Pa)

Area ≈ 6.77 x 10⁻⁴ m²

So, between each tire and the ground, the area of contact is approximately 6.77 x 10⁻⁴ square meters.

Learn more about pressure here: https://brainly.com/question/28012687

#SPJ11

The kinetic energy of the second particle is 2K.

Charge of the first particle = Q

Charge on the second particle = 2Q

mass of the first particle = m

mass of the second particle = m/2

Potential difference applied = V

Given that, mass doesn't have an effect on the kinetic energy, just on the speed.

The kinetic energy attained by the first particle,

K = charge x potential difference

K = Q x V = QV

So, the accelerating potential, V = K/Q

Since, the second particle is accelerated from rest through the same potential difference, its kinetic energy,

K' = 2Q x V

K' = 2K

To learn more about accelerating potential, click:

https://brainly.com/question/13290525

#SPJ4

When a buck-boost transformer has a current less than nine amperes, an overcurrent protection device is allowed to be rated at not more than 125% of the transformer's primary current.

To calculate the rating of the overcurrent protection device:
1. Determine the primary current of the transformer (let's assume it's less than 9 amperes).
2. Multiply the primary current by 125% (or 1.25) to find the maximum allowed rating for the overcurrent protection device.

For example, if the primary current is 8 amperes, the maximum allowed rating for the overcurrent protection device would be 8 x 1.25 = 10 amperes.

To know more about overcurrent protection device:

https://brainly.com/question/28256039

#SPJ11

The decrease in the amplitude of spring oscillations over time is caused by damping. Damping refers to the process of removing energy from the system, which results in a decrease in the amplitude of oscillations. There are two types of damping: viscous damping and non-viscous damping.

Viscous damping occurs due to the presence of a fluid, such as air or water, which resists the motion of the spring. The fluid absorbs the energy of the spring and converts it into heat, which results in a decrease in the amplitude of oscillations. Non-viscous damping occurs due to the presence of external forces, such as friction or resistance, which also remove energy from the system.

In the case of spring oscillations, damping can be caused by a variety of factors, such as air resistance, friction between the spring and its surroundings, or internal friction within the spring itself. As the oscillations continue, the energy of the system is gradually dissipated, leading to a decrease in the amplitude of oscillations.

In summary, the damping of spring oscillations occurs due to the removal of energy from the system, which can be caused by a variety of factors. As the energy of the system is dissipated, the amplitude of oscillations gradually decreases over time.

For more such questions on Damping.

https://brainly.com/question/28229722#

#SPJ11

The statement "the electrical force between charges depends only on the charges' magnitude and separation distance" is correct.

An electric force is the interaction of either attractive force or repulsive force between two charged bodies. This force is similar to other forces because it affects and impacts towards a particular object and can be easily demonstrated by Newton’s law of motion. Electric force is one of the forces which is exerted over other bodies.

The force between two charges is directly proportional to the product of their magnitudes and inversely proportional to the square of the separation distance between them, according to Coulomb's Law. Therefore, the electrical force between charges is determined solely by the magnitude of the charges and their separation distance.

To learn more about electrical force https://brainly.com/question/30236242

#SPJ11

Based on the given scenario, the electron would be affected by the magnetic field of the horseshoe magnet.

As it is shot through the spot between the ends of the magnet, it would experience a repulsive force from both poles.

This would cause its direction to change and it would be turned back.

The increase in speed would depend on the strength of the magnetic field and the distance between the electron and the poles.

Ultimately, the electron would not be unaffected by the field, but rather would experience a force that changes its trajectory.

It is not necessarily attracted to one pole and repelled by the other, but rather experiences a repulsive force from both poles.

To know more about magnetic field here

https://brainly.com/question/23096032

#SPJ11

The neutral point is located at a distance x from the 10 nC charge and (d+x) from the -20 nC charge.

Yes, there is a point between a 10 nC charge and a -20 nC charge at which the electric field is zero. This point is known as the "neutral point" or the "equipotential point" and it lies on the line that joins the two charges.

To find the position of the neutral point, we can use the principle of superposition of electric fields. According to this principle, the electric field at any point due to a collection of charges is the vector sum of the electric fields due to each individual charge.

Let's assume that the 10 nC charge is located at the origin and the -20 nC charge is located on the x-axis at a distance of d from the origin. The electric field due to the 10 nC charge at any point on the x-axis is given by:

E1 = k*q1/x^2

where k is Coulomb's constant, q1 is the charge on the 10 nC charge, and x is the distance from the 10 nC charge to the point on the x-axis.

Similarly, the electric field due to the -20 nC charge at any point on the x-axis is given by:

E2 = k*q2/(d+x)^2

where q2 is the charge on the -20 nC charge and (d+x) is the distance from the -20 nC charge to the point on the x-axis.

For the neutral point, the electric field due to the 10 nC charge and the electric field due to the -20 nC charge must cancel each other out. In other words, E1 + E2 = 0. Solving this equation for x, we get:

x = d*q2/(q1-q2)

Therefore, the neutral point is located at a distance x from the 10 nC charge and (d+x) from the -20 nC charge.

If q1 and q2 have the same magnitude (in this case, 10 nC), the neutral point will be located at the midpoint between the two charges, which is at a distance of d/2 from each charge. However, in this case, since the charges have opposite signs, the neutral point will be located closer to the negative charge (-20 nC).

To learn more about equipotential point visit: https://brainly.com/question/14992054

#SPJ11

To calculate the work done by the friction force on a 5.0 kg box sliding a 10 m distance on ice with a coefficient of kinetic friction of 0.20, follow these steps:

1. Calculate the normal force (N): Since the box is on a flat surface, the normal force is equal to its weight, which is the mass (m) times gravity (g).
  N = m * g
  N = 5.0 kg * 9.81 m/s²
  N ≈ 49.05 N

2. Calculate the friction force (F_friction): Use the coefficient of kinetic friction (μ_k) and the normal force (N).
  F_friction = μ_k * N
  F_friction = 0.20 * 49.05 N
  F_friction ≈ 9.81 N

3. Calculate the work done by the friction force (W): Use the friction force (F_friction) and the distance (d) the box slides.
  W = F_friction * d * cos(θ)
  Since the friction force opposes the motion, the angle between the force and the displacement is 180 degrees (π radians), so cos(θ) = -1.
  W = 9.81 N * 10 m * -1
  W ≈ -98.1 J

The work done by the friction force on the 5.0 kg box sliding a 10 m distance on ice with a coefficient of kinetic friction of 0.20 is approximately -98.1 joules.

To know more about normal force :

https://brainly.com/question/13312273

#SPJ11

The earth takes 8.62 ×10⁴ s to complete one rotation about its axis and hence, the angular velocity of the earth is 7.285×10⁻⁵ rad / s.

When an object rotates or revolves around its axis is called angular velocity. It also defines the angular displacement between two bodies with respect to time. The unit of angular velocity is rad/s.

Angular velocity, ω = Δθ / Δt. Δθ represents the change in angular displacement and Δt represents the time taken for the rotating body. When an object completes one revolution, the angle in radians is  2π and the time taken to complete one revolution is T.

From the given,

Time taken to complete to rotation = 8.62 x 10^4 s

ω = 2π / T

   = 2×3.14 / 8.62 x 10^4

   = 7.285×10⁻⁵ rad / s.

The angular velocity of the earth is 7.285×10⁻⁵ rad / s.

Learn more about angular velocity :

https://brainly.com/question/12446100

#SPJ4

The arrowheads on the cutting-plane in a sectional view indicate the direction of sight. In other words, they show the direction in which the observer is looking at the object.

The cutting-plane is an imaginary plane that slices through the object, and the arrowheads point in the direction of the cut. This helps to clarify the relationship between the view and the object.

In addition to the arrowheads, there are other types of lines associated with sectional views. For example, the section line shows the location of the cutting-plane, and it is typically a dashed line. The section hatching or shading is used to distinguish the cut surfaces from the uncut surfaces. The hatch lines are typically at a 45-degree angle and spaced evenly. The outline or contour lines are used to show the shape of the object and to differentiate between the cut and uncut portions.

Overall, the use of arrowheads, section lines, section hatching, and contour lines in a sectional view helps to provide a clear and detailed representation of the object. This type of drawing is particularly useful in engineering and architecture, where precise visualization and communication of designs are essential.

For more such questions on Arrowheads.

https://brainly.com/question/4027056#

#SPJ11

The wave described in the question is a longitudinal wave. Option C

Longitudinal waves are waves in which the particles of the medium vibrate back and forth in the same direction as the wave travels. This is in contrast to transverse waves, in which the particles of the medium vibrate perpendicular to the direction of the wave.
In the example given, the wind creates a disturbance in the field of grain, causing the plants to move back and forth. This movement creates a wave that travels across the field. The particles of the plants are moving in the same direction as the wave, making it a longitudinal wave.
Polarized waves are waves in which the oscillations occur in a single plane, while electromagnetic waves are waves that consist of oscillating electric and magnetic fields. Neither of these types of waves are applicable to the scenario described in the question.
In summary, the wave described in the question is a longitudinal wave, as the particles of the medium (the plants) vibrate back and forth in the same direction as the wave travels.So, option C is correct.

For more such questions on longitudinal wave visit:

https://brainly.com/question/14364881

#SPJ11

According to the cosmic calendar, which compresses the entire history of the universe into a single year, early humans first walked on Earth just a few hours before midnight on December 31.

To put it in perspective, if the cosmic calendar starts on January 1 with the Big Bang and ends on December 31 with the present day, then early humans appeared on the scene around 11:59 pm on December 31. This means that humans have only been around for a tiny fraction of the universe's existence, which spans over 13 billion years.

It's important to note that the exact timing of when early humans first walked on Earth is still up for debate among scientists, as there is limited fossil evidence and the timeline can be affected by various factors such as climate change and evolutionary processes. However, based on current knowledge and research, it is estimated that early humans appeared on Earth around 2-3 million years ago during the Paleolithic era.

Over time, humans evolved and developed various tools and technologies that allowed them to survive and thrive in different environments, leading to the diverse cultures and societies we see today.

For more such questions on Cosmic calendar.

https://brainly.com/question/28547603#

#SPJ11

Water is slowly poured into the container until the water level has risen into tubes 1, 2 and 3. The water doesn't overflow from any tubes. We have to compare the water depths in the three columns.

Since the water level has risen into all three tubes, the pressure at the bottom of all three tubes is the same.

The pressure at the bottom of each tube is given by the height of the water column multiplied by the density of the water and the acceleration due to gravity.

Since the density and acceleration due to gravity are the same for all three tubes, the pressure at the bottom of each tube depends only on the height of the water column. Therefore, the water depths in the three columns must be the same, i.e., D1 = D2 = D3.

So, the correct answer is: D1 = D2 = D3.

Learn more about water depths at: https://brainly.com/question/28831566

#SPJ11

The object will continue to move in a straight line at a constant velocity unless acted upon by an external force.

Translational equilibrium refers to a state where an object is not experiencing any net force that is causing it to move in a particular direction. This means that the object is either at rest or moving with a constant velocity. In terms of movement, it means that the object's motion is stable and not changing in direction or speed. In terms of movement, this means that the object will either remain at rest or continue moving at a constant velocity, as there is no unbalanced force to cause any change in its motion.

Learn more about motion Refer: https://brainly.com/question/22810476

#SPJ11

The force of the muscle contraction is approximately 1.962 Newtons.

To calculate the force of a muscle contraction given the vertical calibration, you need to know the weight of the object that is being lifted by the muscle. You can then use the weight and the vertical calibration to calculate the force of the muscle contraction.

In this example, the vertical calibration is 1 cm/100 g. This means that for every 1 cm of displacement, the weight of the object increases by 100 g. If the measurement is 2 cm, then the weight of the object has increased by:

Weight = 100 g/cm * 2 cm = 200 g

To convert the weight to force, we need to use the acceleration due to gravity, which is approximately 9.81 [tex]m/s^2[/tex]. We can convert the weight in grams to weight in Newtons using the following formula:

Force = Weight * 9.81 m/[tex]s^2[/tex] * (1 kg / 1000 g)

where 1 kg / 1000 g is the conversion factor from grams to kilograms.

Plugging in the weight we calculated above, we get:

Force = 200 g * 9.81 m/[tex]s^2[/tex] * (1 kg / 1000 g)

= 1.962 N

Therefore, the force of the muscle contraction is approximately 1.962 Newtons.

To learn more about weight visit:

https://brainly.com/question/10069252

#SPJ11

The equivalent capacitance is 32 µF.

A capacitor is a passive electronic component that stores electrical energy in an electric field. It consists of two conductive plates separated by an insulating material called a dielectric. When a voltage is applied across the plates, an electric field is created between them, causing one plate to become positively charged and the other negatively charged. The capacitor can then store this charge, which can be used later to perform work in an electrical circuit. The amount of charge that a capacitor can store is determined by its capacitance, which is measured in farads (F).

When capacitors are connected in parallel, the equivalent capacitance is calculated by adding up the capacitance values of individual capacitors. Therefore, the equivalent capacitance of a 6 µF capacitor, a 10 µF capacitor, and a 16 µF capacitor connected in parallel is:

Ceq = C1 + C2 + C3 = 6 µF + 10 µF + 16 µF = 32 µF

Hence, the equivalent capacitance is 32 µF.

To learn more about capacitance click:

brainly.com/question/28445252

#SPJ4

.

The wave speed will be reduced by a factor of 0.58, which is the same as dividing the original wave speed by 1.73  Option D is correct.

To answer this question, we need to use the formula for wave speed in a string, which is:
v = √(T/μ)
Where v is the wave speed, T is the tension in the string, and μ is the mass per unit length of the string. We can see that the wave speed is proportional to the square root of μ.
If we triple the mass per unit length of the guitar string, then μ will become 3 times its original value. Plugging this into the wave speed formula, we get:
v = √(T/(3μ))
Simplifying this expression, we get:
v = (1/√3)√(T/μ)
We can see that the wave speed has been divided by the square root of 3. Therefore, the answer is:d) 0.58
The wave speed will be reduced by a factor of 0.58, which is the same as dividing the original wave speed by 1.73 (since 1/√3 ≈ 0.58). This makes sense because a higher mass per unit length means that the string will be less flexible and harder to vibrate, resulting in a slower wave speed.  Therefore option D is correct.

For more such questions on wave visit:

https://brainly.com/question/25699025

#SPJ11

 The charge Q is uniformly distributed throughout the sphere. The correct answer is (B)

When a solid conducting sphere is given a positive charge Q, the charge will distribute itself evenly throughout the surface of the sphere due to the repulsion of like charges. This is known as the "Faraday's ice pail experiment".

According to the principle of electrostatics, the charge on a conductor always resides on its surface and distributes itself in a way that the electric field inside the conductor is zero. Since the charge on a conductor always resides on its surface, it follows that the charge Q in this case must be uniformly distributed throughout the surface of the sphere.

Option (A) is not true because the charge is not concentrated at the center of the sphere. If the charge was concentrated at the center of the sphere, the electric field would not be zero inside the conductor, which contradicts the principle of electrostatics.

Option (C) and (D) are not true because the density of the charge does not change radially outward from the center. If the density decreased or increased radially outward, the electric field inside the conductor would not be zero, which again contradicts the principle of electrostatics.

Option (E) is not true because the charge is distributed throughout the entire volume of the sphere, not just on its surface. A solid conductor has free charges that can move throughout its entire volume, so the charge will distribute itself throughout the entire volume of the sphere until the electric field inside the conductor is zero.

Therefore, the correct answer is (B) it is uniformly distributed throughout the sphere.

To learn about Ohm's law click:

brainly.com/question/1247379

#SPJ4

In order to triple the period of simple harmonic motion of a spring coil, one must change the weight suspended vertically from the spring by a factor of 9.

This can be derived from the formula for the period of simple harmonic motion, which is T = 2π√(m/k), where T is the period, m is the mass of the object attached to the spring, and k is the spring constant.
If we assume that the spring constant remains constant, we can use the formula to determine the change in mass required to triple the period. We know that the period is directly proportional to the square root of the mass, so if we want to triple the period, we need to increase the mass by a factor of 9 (since [tex]3^2[/tex] = 9). This means that the weight suspended from the spring must also be increased by a factor of 9, since weight is proportional to mass.
Therefore, if the weight suspended vertically from a spring coil is x, in order to triple the period of simple harmonic motion, the weight must be changed to 9x. This change in weight will result in a change in mass that will cause the period to triple, as required.

For more such questions on  simple harmonic motion visit:

In order to triple the period of simple harmonic motion of a spring coil, one must change the weight suspended vertically from the spring by a factor of 9.

This can be derived from the formula for the period of simple harmonic motion, which is T = 2π√(m/k), where T is the period, m is the mass of the object attached to the spring, and k is the spring constant.
If we assume that the spring constant remains constant, we can use the formula to determine the change in mass required to triple the period. We know that the period is directly proportional to the square root of the mass, so if we want to triple the period, we need to increase the mass by a factor of 9 (since [tex]3^2[/tex] = 9). This means that the weight suspended from the spring must also be increased by a factor of 9, since weight is proportional to mass.
Therefore, if the weight suspended vertically from a spring coil is x, in order to triple the period of simple harmonic motion, the weight must be changed to 9x. This change in weight will result in a change in mass that will cause the period to triple, as required.

For more such questions on  simple harmonic motion visit:

https://brainly.com/question/26114128

#SPJ11

When the aircraft is directly above or below the VORTAC station, the DME (Distance Measuring Equipment) indicator has the maximum error between the ground distance and the displayed distance to the VORTAC.

The most extreme case of "slant range error" occurs when an aircraft passes directly over the station; rather than reading zero, the DME displays the airplane's altitude above the station (in nautical miles).

Only when flying directly to or from the ground station will DME ground speed and time-to-station be accurate. Any other direction will result in incorrect ground speed and time-to-station.

The greatest DME indication error occurs at. - High altitudes near the VORTAC Because the DME measures slant range distance, its greatest error occurs at high altitudes near the VORTAC. Assume you're at 12,000 feet.

To know more about the DME visit:

https://brainly.com/question/29568187

#SPJ1

The greatest error occurs at higher altitudes when using DME, as it measures the line-of-sight distance, rather than the actual ground distance to the VORTAC.

The DME (Distance Measuring Equipment) indicator will have the greatest error between the ground distance and the displayed distance to the VORTAC (VHF Omnidirectional Range Tactical Air Navigation) when the aircraft is flying at higher altitudes. This is because the DME measures 'line-of-sight' distance, which forms a hypotenuse of a right triangle, hence higher from the ground level. When at higher altitudes, this slant range error becomes more prominent compared to when flying closer to the ground level, hence often leading to overestimates of the true ground distance to the VORTAC station.

https://brainly.com/question/35878452

#SPJ6

The result of multiplying a particle's mass by its velocity is the fluctuation in momentum of a ball, which is 30 kg per second. Since momentum has both a magnitude and a direction, it is a vector quantity.

Almost every action that involves motion has momentum. It is an important tenet of physicsFor instance, if a team is moving forward and trying to stop, it will be difficult.

mv - mu, where u = 0 and v = 10 m/s, equals change in momentum.  Note that the ball moved from rest, therefore its initial velocity was zero (u = 0).

Momentum change is equal to mv mu, which is 3*10 - 3*0, or 30.

30 kg/s = change in momentum.

Momentum can be compared to the "power" a moving body has, or the amount of force it can exert on another body. For instance, a baseball that is thrown quickly (high velocity) and has a small bulk (big mass) can have the exact same momentum as a bowling ball that is travelling very slowly (low velocity).

To know more about momentum visit:

https://brainly.com/question/30677308

#SPJ1

The force on an electron due to a magnetic field is given by F = qv × B, where q is the charge on the electron, v is its velocity, and B is the magnitude of the magnetic field.

A magnetic field is an invisible force that can be generated by electric currents and can be used to exert a force on other magnetic materials. It is most commonly found around magnets and electric currents. It is made up of lines of force that are created by the magnetic poles of a magnet and can be used to attract or repel other materials. The strength of the magnetic field is determined by the number of lines of force and the distance between them. Magnetic fields are used in a variety of applications, including navigation, electrical power generation.

Therefore,the force on the electron due to the magnetic field is F = (1.6 × 10∧-19C)(2 × 10∧6m/s)i + (3 × 10∧ × 6m/s)j × B,where B is the magnitude of the magnetic field.

To learn more about magnetic field

https://brainly.com/question/14411049

#SPJ1