The protein folds and interacts with other molecules, and could have implications for the protein's function.
In each of the variants V86A, M87A, L209A, and I276A, the substitution that took place changed the side chain of the amino acid at the affected position in the following way:
V86A: The amino acid at position 86 was valine (V), which has a branched side chain. The substitution changed it to alanine (A), which has a small, non-branched side chain.
M87A: The amino acid at position 87 was methionine (M), which has a sulfur-containing side chain. The substitution changed it to alanine (A), which has a small, non-sulfur-containing side chain.
L209A: The amino acid at position 209 was leucine (L), which has a branched side chain. The substitution changed it to alanine (A), which has a small, non-branched side chain.
I276A: The amino acid at position 276 was isoleucine (I), which has a branched side chain. The substitution changed it to alanine (A), which has a small, non-branched side chain.
In general, substitutions of amino acids in proteins can have a range of effects on the protein's structure and function, depending on the specific properties of the substituted amino acid and its location in the protein. In the case of the variants listed here, the substitutions are all changing bulky, branched amino acids to smaller, non-branched alanine residues. This can potentially affect the way the protein folds and interacts with other molecules, and could have implications for the protein's function.
To learn more about potentially affect visit:
https://brainly.com/question/3482320
#SPJ11
Based on your prediction and your observations, what mathematical definition might you use to describe the momentum you would need to stop an oncoming vehicle traveling with a known mass and velocity? Should it depend on the mass, the velocity or both? Explain your choice.
momentum is mass times velocity, hence it depends on both mass and velocity. in order to stop an object with known mass and velocity, we can find applied force if we know the time taken by body to change the velocity from v to 0.
Momentum is defined as mass times velocity. it tells about the moment of the body. it is denoted by p and expressed in kg.m/s. mathematically it is written as p = mv. A body having zero velocity or zero mass has zero momentum. its dimensions is [M¹ L¹ T⁻¹]. Momentum is conserved throughout the motion.
According to conservation law of momentum initial momentum is equal to final momentum.
To know more about momentum
https://brainly.com/question/30487676
#SPJ4.
A string is strung horizontally with a fixed tension. A wave of frequency 100 Hz is sent along the string, and it has a wave speed of 50.0 m/s. Then a second wave, one of frequency 200 Hz, is sent along the string. What is the wave speed of the second wave?
The wave speed of the second wave is 100 m/s
The wave speed of a wave on a string is dependent on the properties of the string, such as its tension and mass per unit length. Since the tension of the string is fixed in this scenario, we can assume that the wave speed remains constant for both the 100 Hz and 200 Hz waves.
To find the wave speed, we can use the equation v = fλ, where v is the wave speed, f is the frequency, and λ is the wavelength. Since we know the frequency of the first wave is 100 Hz and its wave speed is 50.0 m/s, we can solve for its wavelength:
v = fλ
50.0 = 100λ
λ = 0.5 m
Now that we know the wavelength of the first wave, we can use the same equation to find the wave speed of the second wave:
v = fλ
v = 200(0.5)
v = 100 m/s
Therefore, the wave speed of the second wave is 100 m/s. This makes sense, as higher frequency waves tend to have shorter wavelengths and therefore faster wave speeds.
For more such questions on speed visit:
https://brainly.com/question/13943409
#SPJ11
Four lamps are connected in parallel in a single circuit. If one of the lamp burns out, what will happen to the other lamps
When four lamps are connected in parallel in a single circuit and one of the lamps burns out, the other lamps will continue to function normally.
This is because, in a parallel circuit, each lamp has its own independent path to the power source, and the failure of one lamp does not affect the operation of the others.
In a parallel circuit, the voltage across each branch is the same, and the total current flow is equal to the sum of the individual branch currents. When a lamp burns out in a parallel circuit, the resistance of that branch increases, which results in a decrease in the total current flow.
However, the current continues to flow through the other branches, and the lamps connected to those branches continue to operate normally.
In summary, when four lamps are connected in parallel in a single circuit, and one of the lamps burns out, the other lamps will continue to function normally.
This is because each lamp has its own independent path to the power source, and the failure of one lamp does not affect the operation of the others.
To learn more about parallel circuit, refer below:
https://brainly.com/question/11409042
#SPJ11
If an ideal gas does positive work on its surroundings, we may assume, with regard to the gas:
Answer:
If an ideal gas does positive work on its surroundings, we can assume that the gas has undergone a decrease in its internal energy. This is based on the first law of thermodynamics, which states that the change in the internal energy of a system is equal to the heat added to the system minus the work done by the system.
When an ideal gas does positive work on its surroundings, it means that the gas has transferred energy to the surroundings by performing work. This results in a decrease in the internal energy of the gas because it has lost some of its energy to the surroundings.
Therefore, we can assume that the temperature of the gas has decreased because the internal energy of the gas is proportional to its temperature. This assumption is based on the ideal gas law, which states that the pressure, volume, and temperature of an ideal gas are related. If the pressure and volume of the gas remain constant, a decrease in the temperature of the gas will result in a decrease in its internal energy.
In summary, if an ideal gas does positive work on its surroundings, we can assume that the gas has undergone a decrease in its internal energy and its temperature has decreased.
Explanation:
the tip of a flashlight bulb is touching the top of the 3 v battery in figure q28.2. does the bulb light? why or why not?
No, the bulb would not light up. This is because a flashlight bulb needs a complete circuit to light up, which means that there needs to be a flow of electric current through the bulb.
In the given scenario, the tip of the bulb is touching only the top of the 3 V battery, which means that there is no complete circuit. In order for the bulb to light up, the bulb's base needs to be connected to the negative terminal of the battery, and the positive terminal of the battery needs to be connected to the switch.
When the switch is turned on, the circuit will be complete, and the current will flow from the positive terminal of the battery to the switch, then through the bulb, and back to the negative terminal of the battery, thereby lighting up the bulb.
In summary, the tip of a flashlight bulb touching the top of a 3 V battery would not light up the bulb because it does not create a complete circuit. The bulb's base needs to be connected to the negative terminal of the battery, and the positive terminal of the battery needs to be connected to the switch in order to complete the circuit and allow the bulb to light up.
For more such questions on Flashlight bulb.
https://brainly.com/question/29268884#
#SPJ11
Which of the following statements about conductors under electrostatic conditions is true?
A. Positive work is required to move a positive charge over the surface of a conductor.
B. Charge that is placed on the surface of a conductor always spreads evenly over the surface.
C. The electric potential inside a conductor is always zero.
D. The electric field at the surface of a conductor is tangent to the surface.
E. The surface of a conductor is always an equipotential surface.
Out of the given statements about conductors under electrostatic conditions, option C is true. The electric potential inside a conductor is always zero. This is because in electrostatic conditions, charges on a conductor are in static equilibrium and there is no electric field inside the conductor.
Any excess charge on the conductor resides on its surface, and the electric field inside the conductor is zero. Due to this, the electric potential inside a conductor is constant and equal to zero.
Option A is false as positive work is not required to move a positive charge over the surface of a conductor. This is because the charge on a conductor is free to move, and the electric field inside a conductor is zero.
Option B is false as the charge that is placed on the surface of a conductor may not always spread evenly over the surface. This is because the shape and geometry of the conductor can affect the distribution of charges on its surface.
Option D is false as the electric field at the surface of a conductor is always perpendicular to the surface. This is because if the field were tangent to the surface, there would be a component of the field along the surface, which would cause charges to move along the surface, resulting in a non-static equilibrium.
Option E is false as the surface of a conductor is not always an equipotential surface. This is because the distribution of charges on a conductor's surface can be uneven, leading to variations in the electric potential on its surface.
Hence, Option C is correct.
For more such questions on Electrostatic conditions.
https://brainly.com/question/31566899#
#SPJ11
What happens when the less massive cart is moving much faster than the more massive cart? Much slower? At an intermediate speed?
The exact outcome of the collision will depend on the specific values of the masses and velocities of the carts, as well as the nature of the collision.
Assuming that the two carts are identical in every other aspect (e.g., friction, air resistance, etc.), the following would happen in each scenario:
Less massive cart is moving much faster than the more massive cart:
In this scenario, the less massive cart will exert a larger force on the more massive cart when they collide, due to its higher velocity. As a result, the more massive cart will experience a larger acceleration and move in the direction of the less massive cart. The less massive cart will also experience some deceleration due to the collision.
Less massive cart is moving much slower than the more massive cart:
In this scenario, the less massive cart will exert a smaller force on the more massive cart when they collide, due to its lower velocity. As a result, the more massive cart will experience a smaller acceleration and may not move much, while the less massive cart will experience a large deceleration due to the collision.
Less massive cart is moving at an intermediate speed compared to the more massive cart:
In this scenario, the two carts will experience an elastic collision if they are perfectly elastic or an inelastic collision if they are not. In an elastic collision, the carts will rebound from each other with the same relative speed they had before the collision. In an inelastic collision, the two carts will stick together and move off with a common velocity. The exact outcome of the collision will depend on the specific values of the masses and velocities of the carts, as well as the nature of the collision.
For more such questions on collision , Visit:
https://brainly.com/question/7221794
#SPJ11
The electric force per unit charge exerted on a point positive charge 'q' is:
The behavior of charged particles and electric circuits.
The electric force per unit charge exerted on a point positive charge "q" is known as the electric field strength, denoted by the symbol "E".
Mathematically, the electric field strength "E" at a point in space is defined as the electric force "F" per unit charge "q" at that point, expressed as:
E = F/q
where "E" is measured in units of volts per meter (V/m), "F" is measured in units of newtons (N), and "q" is measured in units of coulombs (C).
The electric field strength describes the strength and direction of the electric field at a point in space. A positive test charge placed in an electric field will experience an electric force in the direction of the electric field if it is also positive, and in the opposite direction of the electric field if it is negative.
The electric field is a fundamental concept in electromagnetism and plays a key role in understanding the behavior of charged particles and electric circuits.
To learn more about electric field visit:
https://brainly.com/question/15800304
#SPJ11
T/F.The failure to have my TA check my setup before turning on the power could result in damage to the setup and/or bad data. TRUE
True. It is important to have someone with knowledge of the equipment, such as a TA (Teaching Assistant), check the setup before turning on the power to prevent potential damage to the equipment or inaccurate data due to a faulty setup.
The failure to have a Teaching Assistant (TA) check a setup before turning on the power can result in various issues such as equipment damage and inaccurate data. TAs are typically knowledgeable about the equipment and can help identify any potential issues with the setup, such as loose connections or incorrect settings. By not having a TA check the setup before powering it on, there is a risk of causing damage to the equipment due to incorrect use or malfunction.
Learn more about Teaching Assistant
https://brainly.com/question/28384283
#SPJ4
Three 1.50-kΩ resistors can be connected together in four different ways, making combinations of series and/or parallel circuits
What are these four ways?
The four ways to connect the three 1.50-kΩ resistors are:All in series ,Two in series,One in s.eries, All in parallel.
The four possible ways to connect three 1.50-kΩ resistors are:
All in series: In this configuration, the resistors are connected end-to-end, with the first resistor connected to the power source, the second resistor connected to the first resistor, and the third resistor connected to the second resistor and to the ground. The total resistance of the circuit is R = 1.50 kΩ + 1.50 kΩ + 1.50 kΩ = 4.50 kΩ.Two in series, one in parallel: In this configuration, two resistors are connected end-to-end in series, and this combination is connected in parallel with the third resistor. The total resistance of the circuit is R = (1.50 kΩ + 1.50 kΩ) // 1.50 kΩ = 1.00 kΩ.One in series, two in parallel: In this configuration, one resistor is connected to the power source, and this is connected in series with the combination of two resistors connected in parallel. The total resistance of the circuit is R = 1.50 kΩ + (1.50 kΩ // 1.50 kΩ) = 2.25 kΩ.All in parallel: In this configuration, all three resistors are connected in parallel with each other. The total resistance of the circuit is R = 1 / (1/1.50 kΩ + 1/1.50 kΩ + 1/1.50 kΩ) = 0.50 kΩ.Learn more about kΩ resistors
https://brainly.com/question/30897884
#SPJ4
If you weigh yourself at the equator of earth, would you get bigger, smaller, or similar value than if you weigh yourself at one of the poles?
If you weigh yourself at the equator of Earth, you would get a slightly smaller value than if you weigh yourself at one of the poles. This is due to two main factors: Earth's shape and its rotation.
Earth is not a perfect sphere; it is slightly flattened at the poles and bulging at the equator, known as an oblate spheroid. This shape causes the gravitational force to be slightly stronger at the poles than at the equator.
This difference in distance from the center of the Earth results in a slightly weaker gravitational pull at the equator compared to the poles, which causes you to weigh slightly less. However, the difference in weight is very small and would not be noticeable unless you have extremely sensitive equipment.
Additionally, Earth's rotation creates a centrifugal force that acts outward at the equator, counteracting some of the gravitational force. This causes objects at the equator to experience slightly less gravitational force than objects at the poles.
In summary, your weight would be slightly less at the equator than at the poles due to Earth's shape and its rotation.
To know more about oblate spheroid:
https://brainly.com/question/31173246
#SPJ11
What is one important reason why Venus cannot support life as we know it? *
A. Venus' surface temperature is about 480 degree C (896 degree Fahrenheit).
B. Venus has no life sustaining atmosphere.
C. Venus' dense clouds keep the planet's temperature very low.
D. It does support life already
Venus' surface temperature is about 480 degree C (896 degree Fahrenheit). This extreme temperature is much too hot to support life as we know it. The correct answer is A.
Additionally, Venus' atmosphere is composed mostly of carbon dioxide, which would make it difficult for humans to breathe. The planet also lacks a protective magnetic field, which means that its surface is bombarded with high levels of solar radiation. While there has been some speculation about the possibility of microbial life existing in Venus' atmosphere, no conclusive evidence has been found to support this theory. Hence the correct answer is option: A.
To know more about magnetic field, here
brainly.com/question/14848188
#SPJ4
Suppose you take two thermometers out of hot water, dry one, and then wave both around in the air. Will there be any difference in the time it takes them to reach room temperature? (Hint: Imagine getting out of a shower on a dry day. How does perspiration work?)
Yes, there will be a difference in the time it takes for the thermometers to reach room temperature. The thermometer that was dried will reach room temperature faster than the one that was not dried. This is because the process of evaporation, which is similar to how perspiration works, cools the wet thermometer more quickly.
When you wave the thermometers around in the air, the remaining water on the wet thermometer will evaporate, taking heat away from the thermometer and causing it to cool down at a slower rate than the dried thermometer.
The dry thermometer will evaporate any moisture on its surface more quickly than the wet thermometer. This is similar to how perspiration works on our bodies - when we get out of the shower on a dry day, the water on our skin evaporates more quickly, cooling us down faster. Therefore, the dry thermometer will cool down faster than the wet thermometer and will reach room temperature before the wet one.
Learn more about thermometers here:
https://brainly.com/question/2339046
#SPJ11
Spherical particles of density 2.0 g/cm3 are shaken in a container of water (viscosity = 1.0 x 10-3 N·s/m3). The water is 8.0 cm deep and is allowed to stand for 30 minutes. What is the radius of the largest particles still in suspension at that time?
The radius of the largest particle still in suspension at that time is approximately 2.94 x 10^-5 m.
To compute the radius of the biggest particle remaining in suspension, we must first calculate the terminal velocity of a particle with that radius, which is the velocity at which the gravitational pull on the particle is balanced by the fluid's drag force.
The terminal velocity (Vt) of a spherical particle of radius (r) and density (ρp) in a fluid of density (ρf) and viscosity (μ) can be calculated using the following equation:
Vt = (2/9) * ((ρp - ρf)/μ) * g * r^2
where g denotes the acceleration due to gravity (9.81 m/s^2).
First, we need to convert the density of the particle to kg/m^3:
Density of particle = 2.0 g/cm^3 = 2000 kg/m^3
Density of water = 1000 kg/m^3
The radius of the largest particle in suspension is the radius at which the terminal velocity is equal to the settling velocity of a particle, which is given by the following equation:
Vs = (2/9) x (ρp - ρf) x g x r^2 / μ
We can assume that the settling velocity is equal to the velocity at which the particle is just about to settle, i.e., it is very close to the terminal velocity.
Therefore, equating the two equations, we get:
Vt = Vs
(2/9) * ((ρp - ρf)/μ) * g * r^2 = (2/9) * (ρp - ρf) * g * r^2 / μ
Simplifying and solving for r, we get:
r = (μ^2 / ((ρp - ρf) * g * μ))^(1/3) * (ρp / ρf - 1)^(1/3)
Substituting the given values, we get:
r = (1.0 x 10^-3 N·s/m^2)^2 / ((2000 kg/m^3 - 1000 kg/m^3) * 9.81 m/s^2 * 1.0 x 10^-3 N·s/m^2))^(1/3) * (2000 kg/m^3 / 1000 kg/m^3 - 1)^(1/3)
r = 2.94 x 10^-5 m
Therefore, 2.94 x 10^-5 m is the radius of the largest particle still in suspension at that time.
For more such questions on radius, click on:
https://brainly.com/question/28844366
#SPJ11
A 10 µC charge is at the origin. A -15 µC charge is on the x-axis 10 cm to the right of the origin. At what point other than at infinity can a 1 µC charge be placed so that there will be no net electrostatic force on it?
A 1 µC charge can be placed 26.7 cm to the right of the origin so that there will be no net electrostatic force on it.
Calculate the electric field at the point where the 1 µC charge will be placed due to the two charges:
[tex]E1 = k * Q1 / r1^2E1 = (9 x 10^9 N m^2/C^2) * (10 x 10^-6 C) / (r1^2)E2 = k * Q2 / r2^2E2 = (9 x 10^9 N m^2/C^2) * (-15 x 10^-6 C) / (0.1 m + r2)^2[/tex]
The electric fields due to the two charges must be equal in magnitude but opposite in direction in order for there to be no net electrostatic force on the 1 µC charge. Therefore, we can set E1 = -E2 and solve for r2:
r2 = 2.67 cm
Therefore, the 1 µC charge must be placed 26.7 cm to the right of the origin.
To know more about electrostatic force click here:
https://brainly.com/question/9774180
#SPJ11
Object
Soccer Ball
Tennis Ball
Marble
Ping Pong Ball
Mass (Kg)
0.45Kg
0.055Kg
0.015Kg
0.020Kg
Acceleration
(m/s2)
5 m/s²
100 m/s²
1000 m/s²
10 m/s²
5. The data above is collected on four different types of objects-
The mass and the acceleration of each type of object are
recorded in the table.
Which object has the greatest applied force?
A. Soccer Ball
C. Marble
B. Tennis Ball
D. Ping Pong Ball
Answer:We can use Newton's second law of motion, which states that the force acting on an object is equal to its mass multiplied by its acceleration (F = ma).
To determine which object has the greatest applied force, we need to calculate the force acting on each object using the given mass and acceleration values.
For the soccer ball:
F = ma = (0.45 kg)(5 m/s²) = 2.25 N
For the tennis ball:
F = ma = (0.055 kg)(100 m/s²) = 5.5 N
For the marble:
F = ma = (0.015 kg)(1000 m/s²) = 15 N
For the ping pong ball:
F = ma = (0.020 kg)(10 m/s²) = 0.20 N
Therefore, the object with the greatest applied force is the marble, with a force of 15 N.
Explanation:
bi333 an ecg (ekg) records all the electrical activity of the heart. what does it mean if the p wave is missing, but the qrs and t waves are normal?
If the P wave is missing on an ECG, but the QRS and T waves are normal, it could indicate that the electrical impulse that initiates the heart's contraction is not originating in the atria (the upper chambers of the heart).
The P wave represents the electrical activity of the atria, so its absence suggests that the impulse is not traveling through this part of the heart.
This could be due to various reasons, such as atrial fibrillation, AV nodal block, or an abnormal pathway of electrical conduction. It is important to consult with a healthcare professional for a proper diagnosis and treatment plan.
Therefore, if the P wave is absent but the QRS and T waves are normal on an ECG, it may be a sign that the electrical impulse that starts the heart's contraction did not originate in the atria (the upper chambers of the heart).
Learn more about "ECG": https://brainly.com/question/28238846
#SPJ11
Which answer has the colors in order from the shortest wavelength to the longest?
Entry field with correct answer
Red Green Blue
Red Blue Green
Blue Red Green
Blue Green Red
the colors in order from the shortest wavelength to the longest is Blue Green and Red. The correct answer is option D.
This is because colors can be arranged in order of increasing wavelength, which corresponds to decreasing frequency, as follows:
violet < blue < green < yellow < orange < red
This can also be understood through the concept of the electromagnetic spectrum, which is a range of electromagnetic radiation that includes visible light. Within the visible light spectrum, blue light has a shorter wavelength than green light, which has a shorter wavelength than red light. Therefore, blue light has a higher frequency and more energy than green or red light.
Therefore, in the given answer choices, the color order from shortest wavelength to longest wavelength would be blue, green, and red.
To learn about frequency click:
https://brainly.com/question/1292129
#SPJ4
Eight bulbs are connected in parallel to a 220 V source by two long leads of total resistance 1.9 Ω If 270 mA flows through each bulb, what is the resistance of each?
According to the question each bulb has a resistance of 818 Ω.
What is resistance?Resistance is the opposition to the flow of electrical current in a circuit. It is measured in ohms, and it is the result of the collision of electrons with the atoms in the materials that make up the circuit. Resistance can be increased or decreased depending on the materials used in the circuit and the number of electrons that are moving through it. Resistance can be beneficial, as it helps to regulate the flow of electricity in a circuit, but it can also be detrimental, as it can cause a circuit to be inefficient or cause it to overheat.
The total resistance in a parallel circuit is equal to the reciprocal of the sum of the reciprocals of the individual resistances.
Rtotal = 1/ (1/R1 + 1/R2 + 1/R3 + ... + 1/Rn)
Since the total resistance of the circuit is 1.9 Ω, we can rearrange this equation to solve for the individual resistances.
1/R1 + 1/R2 + 1/R3 + ... + 1/Rn = 1/1.9
We also know that the total current flowing through the circuit is 270 mA. Since the bulbs are connected in parallel, the current flowing through each bulb is the same.
Therefore, each bulb has a resistance of:
R = V/I = 220V/270mA = 818 Ω.
To learn more about resistance
https://brainly.com/question/28135236
#SPJ1
The apparent power supplied to a motor is six kilovolt amps at 120 volts. What is the impedance of the motor? A. 0.05 ohms B. 0.50 ohms > C. 2.40 ohms D. 24.00 ohms
The impedance of the motor is B. 0.50 ohms.
We can use the formula for the apparent power in an AC circuit, which relates the apparent power, real power, and reactive power to the voltage and current:
S = VI*
where S is the apparent power, V is the voltage, and I* is the complex conjugate of the current.
In this case, we are given that the apparent power supplied to the motor is 6 kVA (kilovolt-amps) at 120 volts. We can convert kVA to VA (volt-amps) by multiplying by 1000:
S = 6 kVA = 6000 VA
We can also write the current in terms of its magnitude and phase angle:
I = |I| e^(jθ)
where |I| is the magnitude of the current, and θ is its phase angle. The complex conjugate of the current is:
I* = |I| e^(-jθ)
The impedance of the motor is given by:
Z = V/I*
Substituting the expressions for S, V, and I* into this formula, we get:
Z = V/(I*) = V/(|I| e^(-jθ)) = V|I| e^(jθ)
To find the magnitude of the impedance, we can take the absolute value of Z:
|Z| = |V| |I|
Substituting the given values, we get:
|Z| = 120 V * (6000 VA / (120 V e^(jθ))) = 50 ohms
Therefore, the impedance of the motor is 50 ohms. However, the answer choices do not include this value, so we need to convert it to the closest answer choice, which is 0.50 ohms. We can do this by dividing by 100:
|Z| = 50 ohms / 100 = 0.50 ohms
Therefore, the answer is B. 0.50 ohms.
To learn more about power, refer below:
https://brainly.com/question/29575208
#SPJ11
Based on the unique the arrangement of myosin and actin in skeletal muscle sarcomeres, explain why active force varies with changes in the muscle's resting length.
Active force varies with changes in the muscle's resting length due to changes in the amount of overlap between myosin and actin filaments within the sarcomere.
When a muscle is at its optimal resting length, there is maximal overlap between myosin and actin filaments, allowing for the greatest number of myosin heads to bind with actin and generate force. If the muscle is stretched beyond its optimal resting length, the overlap between the filaments decreases, leading to a reduction in the number of myosin heads binding with actin and therefore a decrease in active force.
Similarly, if the muscle is shortened beyond its optimal resting length, the filaments overlap too much, causing some myosin heads to be unable to bind with actin and resulting in a decrease in active force.
In summary, the arrangement of myosin and actin within the sarcomere of skeletal muscle is crucial for generating active force, and changes in the resting length of the muscle can disrupt this arrangement, leading to variations in active force production.
You can learn more about Active force at
https://brainly.com/question/29310498
#SPJ11
A mass m has speed v. It then collides with a stationary object of mass 2m. If both objects stick together in a perfectly inelastic collision, what is the final speed of the newly formed object?
The final velocity of the combined object is v/3.
In an inelastic collision, the two objects stick together and move as a single object after the collision. In this case, we have a mass m moving with velocity v colliding with a stationary object of mass 2m.
Conservation of momentum states that the total momentum of the system before the collision is equal to the total momentum after the collision. That is:
m * v + 0 = (m + 2m) * vf
Where vf is the final velocity of the combined object.
Simplifying this equation, we get:
m * v = 3m * vf
Dividing both sides by 3m, we get:
v/3 = vf
Therefore, the final velocity of the combined object is v/3.
To learn more about final velocity visit: https://brainly.com/question/28608160
#SPJ11
Iced tea is made by adding ice to 1.8 kg of hot tea, initially at 80°C. How many kg of ice, initially at 0°C, are required to bring the mixture to 10°C? (Lf = 3.33 x 105 J/kg, cw = 4 186 J/kg·°C)
a. 1.8 kg
b. 1.6 kg
c. 1.4 kg
d. 1.2 kg
We need to add 1.6 kg of ice, initially at 0°C, to bring the mixture of hot tea and ice to 10°C. The answer is b. 1.6 kg.
We can use the formula Q = m * Lf to solve this problem, where Q is the heat required to melt the ice, m is the mass of ice, and Lf is the latent heat of fusion for water (3.33 x 10^5 J/kg).
First, let's calculate the heat lost by the hot tea as it cools down from 80°C to 10°C. We can use the formula Q = m * cw * ΔT, where cw is the specific heat capacity of water (4 186 J/kg·°C), and ΔT is the change in temperature.
Q = 1.8 kg * 4 186 J/kg·°C * (80°C - 10°C)
Q = 532 728 J
This means that the hot tea will release 532 728 J of heat as it cools down.
To bring the mixture to 10°C, we need to add ice that will absorb this amount of heat. Let's call the mass of ice we need to add "m".
Q = m * Lf
532 728 J = m * 3.33 x 10^5 J/kg
m = 1.6 kg
Learn more about latent heat here:
https://brainly.com/question/30762921
#SPJ11
A prize wheel is spinning in a vertical circle when an acceleration of 2.0 rad/s^2 is applied to the edge of the wheel as it spins through 5.0 rad. If the final velocity of the wheel was measured to be 9.0 rad/s, what was the initial velocity of the wheel?
The initial velocity of the prize wheel from the givens is calculated by using the equation of motion. The initial velocity of the wheel is 7.8 m/s.
From the equation of motion, the initial velocity, final velocity, distance, acceleration, and time was taken are calculated by choosing the appropriate equation. From the given, the final velocity (v) is 9 rad/s, distance(s) is 5 rad, and acceleration (a) is 2.0 rad/s^2.
The equation is
v² = u² + 2as
v²₋ 2as = u²
9² - 2(2)(5) =u²
u² = 61
u = √61
= 7.8 m/s
Thus the initial velocity of the wheel is 7.8 m/s.
Learn more about acceleration :
https://brainly.com/question/12550364
#SPJ4
A ships sends out a 1200Hz sound wave which has a wavelength of 120cm what would happen if the ship sent out a 600hz instead
Answer:the wave length becomes doubled or becomes two times the initial wavelength = 240 cm
Explanation:
From wave,
v = λf................ Equation 1
Where v = velocity of the wave, λ = wavelength of the wave, f = frequency of the wave.
Given: f = 1200 Hz, λ = 120 cm = 1.2 m
Substitute into equation 1
v = 1200(1.2)
v = 1440 m/s.
When the ship sent out a 600 Hz sound wave,
make λ the subject of formula in equation 1
λ = v/f............. Equation 2
Given: f = 600 Hz, v = 1440 m/s
Substitute into equation 2
λ = 1440/600
λ = 2.4 m or 240 cm.
When the ship sent out a 600 Hz sound wave instead, the wave length becomes doubled or becomes two times the initial wavelength = 240 cm
a uniform cylinder of radius r mass m and length l rotates freely about a horizontal axis parallel and tangent to the cylinder. the moment of inertia of the cylinder about this axis is
The moment of inertia of a uniform cylinder of radius r and mass m about an axis parallel and tangent to the cylinder can be calculated as I = (1/2)mr^2, where m is the mass of the cylinder and r is the radius. This moment of inertia represents the resistance of the cylinder to changes in its rotational motion.
When the cylinder rotates freely about this horizontal axis, it will experience a torque due to gravity acting on its center of mass. This torque will cause the cylinder to rotate at a constant angular velocity.
The tangent axis is chosen because it is perpendicular to the force of gravity acting on the cylinder, and therefore the torque due to gravity can be easily calculated. The torque due to gravity is given by the equation T = mgd, where m is the mass of the cylinder, g is the acceleration due to gravity, and d is the distance between the center of mass of the cylinder and the tangent axis.
The moment of inertia of the cylinder about the tangent axis determines how much rotational energy is stored in the cylinder as it rotates. This energy is proportional to the square of the angular velocity of the cylinder.
In summary, the moment of inertia of a uniform cylinder rotating freely about a horizontal axis parallel and tangent to the cylinder is determined by the mass and radius of the cylinder. The choice of the tangent axis is important because it allows for easy calculation of the torque due to gravity, which causes the cylinder to rotate at a constant angular velocity. The moment of inertia determines how much rotational energy is stored in the cylinder as it rotates.
Learn more about moment of inertia here:
brainly.com/question/30051108
#SPJ11
ch 11. based on the expected intermolecular forces, which halogen has the highest boiling point?
a. F2
b. Cl2
c. Br2
d. I2
I₂ molecule has the highest boiling point among the halogens. So, the correct option is d.
As we go down the group, the size of the atom increases, and so, the intermolecular forces or the dispersion force becomes stronger.
Among the halogens, I₂ molecule has the highest size and thus stronger intermolecular forces. That means, the electrons in the molecule are away from the nucleus.
Therefore Iodine molecule will have the highest boiling point among the halogens.
To learn more about intermolecular forces, click:
https://brainly.com/question/29773695
#SPJ4
In one or two sentences, explain why infrastructure is a barrier to the economy of
Sub-Saharan Africa.
Africa's lack of adequate infrastructure prevents it from producing as quickly as other nations, which makes it difficult for it to afford to create infrastructure.
What types of infrastructure are there?Transportation, communication, sewage, water, and educational infrastructure are a few examples. Infrastructure projects are typically expensive and capital-intensive, yet they are essential to a region's growth and prosperity.
What kind of infrastructure is most typical?The most significant and prevalent component of network infrastructure is likely cabling. It aids in providing linkages and routes for information and communication transfer both inside and outside the company.
To know more about Infrastructure visit:
https://brainly.com/question/14527131
#SPJ1
(C) C = εA/d and changing Q or V has no effect on the capacitance
The capacitance of a parallel-plate capacitor can be increased by increasing which of the following?
(A) The distance between the plates
(B) The charge on each plate
(C) The area of the plates
(D) The potential difference across the plates
(E) None of the above
The capacitance of a parallel-plate capacitor can be increased by increasing the area of the plates. The correct option is C.
The capacitance of a parallel-plate capacitor is given by the equation C = εA/d, where C is the capacitance, ε is the permittivity of free space, A is the area of the plates, and d is the distance between the plates. Therefore, the capacitance can be increased by increasing the area of the plates or decreasing the distance between the plates.
Option (A) is not true because increasing the distance between the plates decreases the capacitance.
Option (B) is not true because changing the charge on each plate has no effect on the capacitance. The capacitance of a capacitor only depends on the geometry of the plates and the dielectric material between them, not the amount of charge stored on the plates.
Option (D) is not true because increasing the potential difference across the plates does not change the capacitance. The potential difference across the plates is related to the charge on the plates and the capacitance through the equation V = Q/C, where V is the potential difference and Q is the charge on the plates. Therefore, changing the potential difference across the plates changes the charge on the plates, not the capacitance.
Option (E) is not true because, as stated above, the capacitance can be increased by increasing the area of the plates or decreasing the distance between the plates.
Therefore, the correct answer is (C) The area of the plates.
To learn about capacitance click:
brainly.com/question/28445252
#SPJ4
Can you provide examples of scenarios where the work done, represented by "W," is considered negligible and the change in internal energy, represented by "DU," is equivalent to the amount of heat added, represented by "Q"? For instance, do you need to perform work to cool down a cup of hot coffee, or can you think of any similar scenarios where this concept applies?
Yes, there are several scenarios where the work done is considered negligible and the change in internal energy is equivalent to the amount of heat added. One such example is when a gas is compressed very slowly, so that there is no significant increase in temperature. In this case, the work done on the gas is very small and can be considered negligible, while the change in internal energy is equal to the amount of heat added.
Another example is when a container of liquid is stirred. If the stirring is done slowly and there is no friction between the liquid and the container, then the work done is negligible and the change in internal energy is equal to the amount of heat added. This is because the stirring process causes the molecules in the liquid to move around and collide with each other, which increases the internal energy of the liquid.
In the case of cooling down a cup of hot coffee, work is actually being done. This is because the coffee is losing heat to the surrounding environment, and in order for this to happen, work must be done to move the heat from the coffee to the environment. However, if the cooling process is done slowly and there is no significant change in pressure or volume, then the work done can be considered negligible and the change in internal energy can be equivalent to the amount of heat added.
To know more about work and internal energy - https://brainly.com/question/31429809
#SPJ11
