In a greenhouse, electromagnetic energy in the form of visible light enters the glass panes and is absorbed and then reradiated. What happens to this reradiated electromagnetic radiation from within the greenhouse?
a.) It's partially blocked by glass.
b.) It's transformed into ultraviolet upon striking the glass.
c.) 100% returns to the atmosphere.
In a greenhouse, electromagnetic energy in the form of visible light enters the glass panes and is absorbed and then reradiated electromagnetic radiation from within the greenhouse is the correct option is a.) It's partially blocked by glass.
In a greenhouse, electromagnetic energy in the form of visible light enters through the glass panes and is absorbed by the plants and other objects inside. This energy is then reradiated as infrared radiation (heat), which is partially blocked by the glass, causing the greenhouse to retain heat and maintain a warmer temperature inside.
The plants and other items inside a greenhouse absorb electromagnetic energy in the form of visible light as it enters through the glass panels. The greenhouse retains heat and keeps its interior at a warmer temperature as a result of this energy being reradiated as infrared radiation (heat), which is then partially blocked by the glass.
To know more about greenhouse click here:
https://brainly.com/question/27537929
#SPJ11
A spring is pulled back 0.30 m and applies a force of 2.0 N to the 0.50 kg mass attached to the end of it. What is the spring constant of the spring?
The spring constant is k = 2.0 N / 0.30 m = 6.67 N/m.The spring constant is a measure of the stiffness of a spring, and it is defined as the force required to stretch or compress a spring by one unit of length. In this case, the spring is pulled back 0.30 m, and it applies a force of 2.0 N to the 0.50 kg mass attached to it.
Using Hooke's law, which states that the force applied to a spring is directly proportional to the displacement of the spring, we can calculate the spring constant using the formula k = F/x, where F is the force applied, and x is the displacement.
This means that for every unit of displacement, the spring will exert a force of 6.67 N. The higher the spring constant, the stiffer the spring, and the more force it will require to compress or stretch it.
To know more about spring constant refer here:
https://brainly.com/question/14159361#
#SPJ11
You are dragging a heavy chair across the floor and that chair is moving toward the east at constant velocity. The net force on the chair
Entry field with correct answer
is zero.
points toward the east.
points downward and eastward (at an angle between the two individual directions).
points upward and eastward (at an angle between the two individual directions).
When you are dragging a heavy chair across the floor, you are applying a force on the chair in the direction of the pull. The chair is moving towards the east at a constant velocity, which means that there is no acceleration acting on the chair. The net force on the chair points towards the east because that is the direction in which you are pulling the chair.
If the net force on the chair was pointing upward and eastward at an angle between the two individual directions, it would mean that there is an additional force acting on the chair, causing it to move in a different direction.
for such more questions on force
https://brainly.com/question/12785175
#SPJ11
A 40.0 kg rocket produces a 764 N upwards force ( "thrust" ). What is the net force acting upon the rocket?
The net force acting upon the rocket is 371.6 N.
The net force acting upon the rocket is the difference between the thrust force and the force of gravity acting on the rocket.
The force of gravity on the rocket can be calculated using the formula
Fg = mg,
where m is the mass of the rocket (40.0 kg) and g is the acceleration due to gravity (9.81 m/s^2). Therefore, Fg = 392.4 N.
The net force acting upon the rocket is then calculated as follows:
Net force = Thrust force - Force of gravity
Net force = 764 N - 392.4 N
Net force = 371.6 N
To learn more about thrust force click here
brainly.com/question/25492661
#SPJ11
Describe how you would find wave velocity in various mediums.
To find wave velocity in various mediums, you need to consider two key factors: the properties of the medium and the type of wave.
Wave velocity can be determined using the formula v = fλ, where 'v' is the wave velocity, 'f' is the frequency, and 'λ' is the wavelength.
For mechanical waves, such as sound waves, the wave velocity depends on the medium's density and elasticity. In solids, it's influenced by the material's shear modulus and density, while in fluids, it's governed by the medium's bulk modulus and density.
For electromagnetic waves, like light, the wave velocity depends on the medium's refractive index, which relates to its permittivity and permeability. In vacuum, the speed of light is constant (approximately 299,792 km/s), while in other media, it slows down depending on the refractive index.
By measuring or obtaining the necessary parameters (frequency, wavelength, medium properties) and using the appropriate formulas, you can find the wave velocity for different types of waves in various mediums.
To learn more about wave, refer below:
https://brainly.com/question/25954805
#SPJ11
Suppose three planets, each with a mass of 2.0x10^25 kg, are arranged in an equilateral triangle at a distance of 4.0x10^12 m on each leg. Calculate the force between m1 and m2.
The force between m1 and m2 is approximately 1.669 x 10^29 Newtons and the required equation for it is 1.669 x 10^29 Newtons.
We'll use the gravitational force equation, which is:
F = G * (m1 * m2) / r^2
Here, F is the gravitational force, G is the gravitational constant (6.674 x 10^-11 N(m/kg)^2), m1 and m2 are the masses of the two planets, and r is the distance between them.
In this problem, we have:
- m1 = m2 = 2.0 x 10^25 kg (mass of each planet)
- r = 4.0 x 10^12 m (distance between the planets)
Now, let's plug these values into the gravitational force equation:
F = (6.674 x 10^-11 N(m/kg)^2) * (2.0 x 10^25 kg * 2.0 x 10^25 kg) / (4.0 x 10^12 m)^2
F = (6.674 x 10^-11 N(m/kg)^2) * (4.0 x 10^50 kg^2) / (1.6 x 10^25 m^2)
F ≈ 1.669 x 10^29 N
Learn more about gravitational constant here:
brainly.com/question/858421
#SPJ11
The wind pushes a paper cup along the sand at a beach. The cup has a mass of 0. 025 kg and accelerates at a rate of 5 m/so. How much force is the wind exerting on the cup
The wind is exerting a force of 0.125 N on the paper cup.
The force exerted by the wind on the cup can be calculated using Newton's second law of motion, which states that the force acting on an object is equal to its mass times its acceleration:
F = m * a
where F is the force in newtons (N), m is the mass in kilograms (kg), and a is the acceleration in meters per second squared (m/s^2).
Substituting given values, we get:
F = 0.025 kg * 5 m/s^2
F = 0.125 N
Substituting the given values, we get:
F = 0.025 kg * 5 m/s^2
F = 0.125 N
To know more about acceleration, here
brainly.com/question/12550364
#SPJ4
the power dissipated within a cell of multiple loops is equal to
This will help to maximize the power output of the cell while minimizing the internal power loss.
The power dissipated within a cell of multiple loops is equal to the product of the current flowing through the cell and the total internal resistance of the cell.
When a cell is in use, a portion of the electrical energy is dissipated within the cell as heat due to the internal resistance of the cell. This is known as the power dissipated or the internal power loss of the cell.
For a multi-loop cell, the internal resistance is the sum of the internal resistances of each cell in the series. Therefore, the power dissipated within the cell can be calculated using the formula:
Pdiss = I^2 * Rint
where Pdiss is the power dissipated in watts (W), I is the current flowing through the cell in amperes (A), and Rint is the total internal resistance of the cell in ohms (Ω).
The power dissipated within the cell is proportional to the square of the current flowing through the cell. Therefore, as the current increases, the power dissipated within the cell also increases. This can lead to a decrease in the efficiency of the cell and a reduction in its overall performance.
To reduce the power dissipated within the cell, it is important to minimize the internal resistance of each cell in the series and use an external load that matches the total resistance of the circuit. This will help to maximize the power output of the cell while minimizing he internal power loss.
To learn more about electrical energy visit:
https://brainly.com/question/16182853
#SPJ11
what value of l would result in an rl circuit that has 90% of its maximum current in when initially connected to a resistor of and a voltage source?
The value of L that would result in 90% of the maximum current in the circuit when initially connected to a resistor and a voltage source is 0.9 times the square of the resistance in the circuit.
What is RL circuit?
An RL circuit is an electrical circuit that consists of a resistor and an inductor connected in series. The letter "R" stands for resistor, and the letter "L" stands for inductor. Inductors are passive electrical components that store energy in a magnetic field when an electric current flows through them, while resistors are electrical components that resist the flow of electrical current.
To determine the value of l in an RL circuit that would result in 90% of its maximum current when initially connected to a resistor and a voltage source, we need to use the time constant of the circuit.
The time constant (τ) of an RL circuit is given by the formula:
τ = L/R
where L is the inductance of the circuit in henries, and R is the resistance of the circuit in ohms.
The time constant represents the time it takes for the current in the circuit to reach approximately 63.2% of its maximum value.
We can use this formula to find the value of L that would result in 90% of the maximum current in the circuit:
τ = L/R
Solving for L, we get:
L = τ x R
We know that at time constant τ, the current in the circuit is approximately 63.2% of its maximum value. Therefore, we can write:
0.632 x Imax = V/R
where Imax is the maximum current in the circuit and V is the voltage across the circuit.
Solving for Imax, we get:
Imax = V/R x 1/0.632
Imax = 1.58 x V/R
Now, we can substitute this expression for Imax into the formula for the time constant:
τ = L/R = L/(1.58 x V/R)
Simplifying, we get:
L = τ x 1.58 x V
We want the current to be 90% of its maximum value when initially connected to the circuit. This means that we want the current to reach this value within one time constant (i.e., when t = τ). Therefore, we can set τ equal to the time it takes for the current to reach 90% of its maximum value:
τ = 0.9 x Imax x R / V
Substituting this expression for τ into the formula for L, we get:
L = 0.9 x R x V x 1.58 / Imax
Substituting the expression we derived earlier for Imax, we get:
L = 0.9 x R x V x 1.58 / (1.58 x V/R)
Simplifying, we get:
L = 0.9 x R^2
Therefore, the value of L that would result in 90% of the maximum current in the circuit when initially connected to a resistor and a voltage source is 0.9 times the square of the resistance in the circuit.
To know more about RL Circuit go to the given link;
brainly.com/question/17563681
#SPJ1
a violinist is tuning her instrument to con- cert a (440 hz). she plays the note while listening to an electronically generated tone of exactly that frequency and hears a beat frequency of 3 hz, which increases to 4 hz when she tightens her violin string slightly. (a) what was the frequency of the note played by her violin when she heard the 3 hz beats? (b) to get her violin perfectly tuned to concert a, should she tighten or loosen her string from what it was when she heard the 3 hz beats?
(a) The frequency could have been either 437 Hz or 443 Hz.
(b) She needs to tighten her string even more.
How to find the frequency of the note played?(a) Let the frequency of the note played by the violinist be f. The beat frequency is the difference between the frequencies of the two tones, so:
|440 Hz - f| = 3 Hz
Solving for f, we get:
f = 437 Hz or 443 Hz
So the frequency of the note played by the violinist when she heard the 3 Hz beats could have been either 437 Hz or 443 Hz.
Should she tighten or loosen her string?(b) When the violinist tightens her string slightly, the frequency of the note increases. We know that the beat frequency increases from 3 Hz to 4 Hz, so the frequency of the note played by the violinist must increase by 1 Hz.
This means that the original frequency was 437 Hz, and the violinist needs to increase the frequency to 440 Hz to get perfectly tuned to concert A.
Therefore, she needs to tighten her string even more, which means she should turn the tuning peg to the right (clockwise when looking at the peg from the front of the instrument).
Learn more about beat frequency
brainly.com/question/14705053
#SPJ11
what number of scans should be signal-averaged in ftir spectroscopy to increase the signal-to-noise ratio by a factor of at least 7?
The number of scans required to increase the signal-to-noise ratio by a factor of at least 7 in FTIR spectroscopy depends on various factors such as the sample, instrument, and experimental conditions.
However, as a general rule of thumb, it is recommended to perform at least 64 scans for high-quality spectra with a good signal-to-noise ratio.
Increasing the number of scans further will improve the signal-to-noise ratio, but at the cost of increased acquisition time.
Therefore, it is important to balance the number of scans with the time constraints of the experiment.
Read more about FTIR spectroscopy from the given link
https://brainly.com/question/28523860
#SPJ11
if a train is accelerating at a rate of 3.0 km/hr/s and its initial velocity is 20 km/hr, what is it velocity after 30 seconds?
The velocity of the train after 30 seconds is calculated as 30.5 m/s.
What is meant by velocity?Velocity is vector quantity that explains the rate at which any object changes the position.
Initial velocity = 20 km/hr = (20 km/hr) x (1000 m/km) / (3600 s/hr) = 5.56 m/s
Acceleration = 3.0 km/hr/s = (3.0 km/hr/s) x (1000 m/km) / (3600 s/hr) = 0.83 m/s²
As v = u + at
v is final velocity, u is initial velocity, a is acceleration , t is time
v = 5.56 m/s + (0.83 m/s²) x 30 s
v = 5.56 m/s + 24.9 m/s
v = 30.5 m/s
Therefore, the velocity of the train after 30 seconds is 30.5 m/s.
To know more about velocity, refer
https://brainly.com/question/24445340
#SPJ1
You are carrying a child on your back as you walk down a hill. The child is traveling straight at a steady speed. In which direction is the force you are exerting on the child?
Entry field with incorrect answer
Upward (vertical).
Upward and forward (between vertical and horizontal).
Forward (horizontal).
Downhill (in the direction of your velocity).
The force you exert on the child while carrying them on your back down a hill is in the forward direction (horizontal), counteracting the force of gravity pulling the child downwards.
The force that you are exerting on the child while carrying them on your back as you walk down a hill is in the forward direction (horizontal). This force is necessary to maintain the child's steady speed and to counteract the force of gravity that is pulling the child downwards. The force you are exerting is not in the direction of your velocity, which is downhill, but in the opposite direction, which is forward.
The force that you are exerting on the child is an example of an external force, which is any force that is applied to an object from outside of the object. In this case, the external force is coming from you as you carry the child on your back.
It's important to note that the force you exert on the child is not a result of the child's weight. The child's weight is a gravitational force that is always directed downwards. The force you exert is necessary to counteract the weight of the child and ensure that they maintain a steady speed while you walk down the hill.
In summary, the force you exert on the child while carrying them on your back down a hill is in the forward direction (horizontal), counteracting the force of gravity pulling the child downwards.
For more such questions on force visit:
https://brainly.com/question/12785175
#SPJ11
compared to the primary voltage, the secondary voltage may be larger, smaller, or the same. the same. the same or smaller, but not larger. smaller. larger.
Compared to the primary voltage, the secondary voltage may be larger, smaller, or the same, depending on the transformer's design and purpose.
Your question is about the relationship between the primary and secondary voltage in a transformer. Compared to the primary voltage, the secondary voltage may be larger, smaller, or the same, depending on the transformer's design and purpose.
A step-up transformer increases the voltage, making the secondary voltage larger than the primary voltage.
In contrast, a step-down transformer reduces the voltage, resulting in a smaller secondary voltage. Finally, an isolation transformer has the same primary and secondary voltage.
Learn more about "voltage": https://brainly.com/question/1176850
#SPJ11
An electron moving along the +x axis enters a region where there is a uniform magnetic field in the +y direction. What is the direction of the magnetic force on the electron? (+x to right, +y up, and +z out of the page.)
The direction of the magnetic force on the electron is given by the right-hand rule.
If you point your right thumb in the direction of the velocity of the electron (+x direction) and your fingers in the direction of the magnetic field (+y direction), then the direction in which your palm faces gives the direction of the force on the electron. In this case, the force is perpendicular to both the velocity of the electron and the magnetic field, and is in the -z direction (into the page).
Therefore, the magnetic force on the electron is in the negative z-direction.
Learn more about magnetic force
https://brainly.com/question/3160109
#SPJ4
Halving the pressure doubles the volume since gases expand when the pressure goes down:1.00×2= 2.00dm3Tripling the Kelvin temperature triples the volume since gases expand when heated: 2.00×3=6.00dm3. The volume changes from 1.00 dm3 to:1.00×2×3= 6.00dm3
The statement provided in the question implies the relationship between the pressure, temperature, and volume of a gas. It is known as the ideal gas law, which states that the product of pressure and volume is directly proportional to the product of temperature and the number of moles of gas.
Mathematically, this can be expressed as PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
Based on the given information, halving the pressure doubles the volume because of the inverse relationship between pressure and volume. Similarly, tripling the Kelvin temperature triples the volume since gases expand when heated, according to Charles's law.
By applying both of these changes, the final volume can be calculated by multiplying the initial volume (1.00 dm3) with the ratio of the final and initial values of pressure and temperature, respectively. Thus, the final volume is obtained as 1.00 x 2 x 3 = 6.00 dm3.
It is essential to note that the ideal gas law is an approximation that applies only to gases that behave ideally under specific conditions, such as low pressure and high temperature. Moreover, the law assumes that the gas particles have negligible volume and do not interact with each other, which may not be the case in reality.
Nonetheless, the ideal gas law is a fundamental concept in chemistry and physics, and it has numerous practical applications, such as in the design of engines, refrigeration systems, and industrial processes.
For more such questions on Ideal gas law.
https://brainly.com/question/28257995#
#SPJ11
How much work would have to be done by a force in moving an electron through a positive potentialdifference of 2.0 x 10^6V?
The work done by a force in moving an electron through a positive potential difference of 2.0 x 10^6V can be calculated using the formula W = q x V, where W is the work done, q is the charge of the electron (which is 1.6 x 10^-19 C), and V is the potential difference. Plugging in the values, we get:W = (1.6 x 10^-19 C) x (2.0 x 10^6V)
W = 3.2 x 10^-13 J
Therefore, the amount of work that would have to be done by a force in moving an electron through a positive potential difference of 2.0 x 10^6V is 3.2 x 10^-13 J.
To calculate the work done in moving an electron through a positive potential difference, you can use the following equation:Work (W) = Charge (q) × Potential Difference (V)
The charge of an electron (q) is approximately -1.6 × 10^-19 Coulombs, and the potential difference (V) given in the problem is 2.0 × 10^6 V.
W = (-1.6 × 10^-19 C) × (2.0 × 10^6 V)
W = -3.2 × 10^-13 Joules
The negative sign indicates that the work done is against the direction of the electric field. Therefore, the work required to move an electron through a positive potential difference of 2.0 × 10^6 V is 3.2 × 10^-13 Joules.
Learn more about moving here
https://brainly.in/question/29679124
#SPJ11
The angular acceleration of a rotating body is given in radians and seconds byα(t)=7+5t+8t2.What are the units of the three numbers in the expression? Use the abbreviations rad and s.
The angular acceleration is a measure of how quickly the rotational speed of the body is changing.
The expression [tex]\alpha (t) = 7 + 5t + 8t^2[/tex] represents the angular acceleration of a rotating body as a function of time t.
The constant term of 7 represents the initial angular acceleration of the body, measured in radians per second squared ([tex]rad/s^2[/tex]). The coefficient of t, 5, represents the rate at which the angular acceleration is increasing with time, measured in radians per second cubed ([tex]rad/s^3[/tex]). The coefficient of [tex]t^2[/tex], 8, represents the rate at which the rate of increase in angular acceleration is changing with time, measured in radians per second to the fourth power ([tex]rad/s^4[/tex]).
To know more about rotational speed , here
brainly.com/question/17025846
#SPJ4
a tapered horizontal pipe carries water from one building to another on the same level. the wider end has a cross-sectional area of 4 m2. the narrower end has a cross-sectional area of 2 m2. water enters the wider end at a velocity of 10 m/sec. a) what is the speed of the water at the narrow end of the pipe?
To solve this problem, we can use the principle of conservation of mass, which states that the mass of the water entering the pipe must equal the mass of the water leaving the pipe.
Since the pipe is horizontal and on the same level, we can assume that the height of the water in the pipe is constant, so we can ignore any effects due to gravity.
We can use the equation of continuity, which states that the product of the cross-sectional area and the velocity of the water is constant throughout the pipe, as long as there are no sources or sinks of water along the way.
Mathematically, we can write:
A1v1 = A2v2
where A1 and A2 are the cross-sectional areas of the wider and narrower ends of the pipe, respectively, and v1 and v2 are the velocities of the water at those points.
Plugging in the given values, we get:
4 m2 x 10 m/sec = 2 m2 x v2
Simplifying, we get:
v2 = 20 m/sec
Therefore, the speed of the water at the narrow end of the pipe is 20 m/sec.
To know more about principle of conservation of mass:
https://brainly.com/question/2536501
#SPJ11
In the Compton effect, a photon of wavelength λ and frequency f hits an electron that is initially at rest. Which one of the following occurs as a result of the collision?a. Photon is absorbed completely.b. Photon gains energy, so the final photo has a frequency greater than f.c. Photon loses energy, so the final photon has a wavelength greater than λd. Photon gains energy, so the final photon has a frequency less than f.e. Photon loses energy, so the final photon has a wavelength less than λ
In the Compton effect, a photon of wavelength λ and frequency f hits an electron that is initially at rest. As a result of the collision, the correct option is c. Photon loses energy, so the final photon has a wavelength greater than λ.
When the photon collides with the electron, some of its energy is transferred to the electron, causing the electron to be scattered. Consequently, the photon loses energy, and according to the relationship between energy, frequency, and wavelength (E = hf and c = λf, where h is Planck's constant and c is the speed of light), a decrease in energy corresponds to a decrease in frequency and an increase in wavelength. Therefore, the final photon has a wavelength greater than λ.
So, the correct option is C.
You can learn more about the Compton effect at: brainly.com/question/30683759
#SPJ11
calculate the total resistance of a circuit where a fan of 2 ohms and 4 lights 1 ohm each are all connected in parallel
The total resistance of a circuit where a fan of 2 ohms and 4 lights 1 ohm each are all connected in parallel is 2/9 ohms.
1: Find the reciprocal of the resistance of each component.
Reciprocal of the fan's resistance: 1/2 ohms
Reciprocal of each light's resistance: 1/1 ohms (for each light)
2: Add the reciprocals of all the resistances together.
Total reciprocal of resistances = (1/2) + (1/1) + (1/1) + (1/1) + (1/1)
3: Simplify the equation.
Total reciprocal of resistances = (1/2) + 4(1/1) = (1/2) + 4 = 9/2
4: Find the reciprocal of the total reciprocal of resistances to find the total resistance.
Total resistance = 1/(9/2) = 2/9 ohms
So, the total resistance of the circuit with a 2-ohm fan and four 1-ohm lights connected in parallel is 2/9 ohms.
Learn more about resistance here:
https://brainly.com/question/24858512
#SPJ11
Do amplitude and wave length of a wave affect the speed of that wave? Assume non-dispersive medium.
Yes, the amplitude and wavelength of a wave do affect its speed in a non-dispersive medium.
The square root of the linear density of the medium determines the wave's speed, which is inversely proportional to it.
A wave that has a longer wavelength and a greater amplitude will therefore move more quickly than one that has a shorter wavelength and a lower amplitude.
In general, a wave's speed is inversely proportional to the square root of its amplitude times its wavelength. As a result, faster waves are produced when amplitudes are higher and when wavelengths are longer.
The characteristics of the medium also have an impact on a wave's speed. Sound waves, for instance, move through water at a rate of four times that of air. Consequently, a wave's speed is a combination of its amplitude, wavelength, and medium.
To learn more about wavelength visit:
https://brainly.com/question/10750459
#SPJ4
An object has an emissivity of 0.95 and radiates heat at a rate of 100W when it is at an absolute temperature T. The temperature doubles to 2T, what will be the new rate of radiation?
To answer your question, we will use the Stefan-Boltzmann Law, which relates the power of radiation (P) to the emissivity (ε), surface area (A), Stefan-Boltzmann constant (σ), and absolute temperature (T) of an object. The formula is:
P = ε * A * σ * T^4
Given the emissivity (ε) of 0.95 and the initial radiation rate of 100W, we can calculate the rate when the temperature doubles to 2T.
When the temperature doubles, the equation becomes:
P_new = ε * A * σ * (2T)^4
Since (2T)^4 = 16 * T^4, the new equation is:
P_new = ε * A * σ * 16 * T^4
From the initial condition (P = 100W), we know that:
100 = 0.95 * A * σ * T^4
Now we can express A * σ * T^4 as a ratio:
A * σ * T^4 = 100 / 0.95 ≈ 105.26
Substitute this back into the equation for P_new:
P_new = 0.95 * (105.26) * 16
P_new ≈ 1608.16 W
So, when the temperature doubles to 2T, the new rate of radiation will be approximately 1608.16 W.
Learn more about radiation here
https://brainly.com/question/13934832
#SPJ11
You are a passenger in a car, not wearing a seat belt. The car makes a sharp left turn. From your perspective in the car, what do you feel is happening to you?
It helps to prevent you from being thrown around in the car during sudden stops or turns, reducing the risk of injury.
As a passenger in a car not wearing a seat belt, during a sharp left turn, you will feel like you are being thrown to the right side of the car due to the inertia of your body. This is because of Newton's First Law of Motion, which states that an object in motion will remain in motion in a straight line at a constant speed unless acted upon by an external force. In the absence of an external force, your body has a natural tendency to continue moving in the same direction and at the same speed as the car before the turn. However, the car's seat, floor, and door exert a force on your body, pushing you towards the left side of the car, which makes you feel as though you are being thrown to the right side of the car. This is why wearing a seat belt is important, as it helps to prevent you from being thrown around in the car during sudden stops or turns, reducing the risk of injury.
To learn more about direction visit:
https://brainly.com/question/13899230
#SPJ11
a 0.500-kg mass suspended from a spring oscillates with a period of 1.28 s. how much mass must be added to the object to change the period to 2.21 s?
A mass of approximately 0.710 kg must be added to the 0.500-kg object to change the period of oscillation from 1.28 s to 2.21 s.
The period of an oscillating spring-mass system can be determined using the equation:
T = 2π √(m/k)
where T is the period of oscillation, m is the mass of the object attached to the spring, and k is the spring constant.
In this case, we are given that a 0.500-kg mass suspended from a spring oscillates with a period of 1.28 s. We can use this information to determine the spring constant of the system:
1.28 s = 2π √(0.500 kg/k)
k = (2π/1.28 s)^2 (0.500 kg)
k = 30.99 N/m
To find how much mass must be added to the object to change the period to 2.21 s, we can use the same equation with the new period and solve for the mass:
2.21 s = 2π √((0.500 + m)/30.99 N/m)
(0.500 + m)/30.99 N/m = (2.21 s/(2π))^2
0.500 + m = 30.99 N/m (2.21 s/(2π))^2
m = 30.99 N/m (2.21 s/(2π))^2 - 0.500 kg
m = 0.710 kg
For similar question period of oscillation
https://brainly.com/question/22499336
#SPJ11
Two thin-walled concentric conducting spheres of radii 5.0 cm and 10 cm have a potential difference of 100 V between them. (k = 1/4πε0 = 8.99 × 109 N ∙ m2/C2)
(a) What is the capacitance of this combination?
(b) What is the charge carried by each sphere?
The capacitance of the combination is 11.1 x 10⁻¹⁰F.
Let the charge of inner sphere be q₁ and that of outer sphere be q₂.
The potential difference between the two spheres is given as,
V₁ - V₂ = (1/4[tex]\pi[/tex]ε₀)q₁ [(1/r₁) - (1/r₂)]
100 = 9 x 10⁹q₁ x [(1/5) - (1/10)]
q₁ = 11.1 x 10⁻⁸C
The charge of outer sphere,
q₂ = (-r₁/r₂)q₁
q₂ = -5.55 x 10⁻⁸C
(a) Capacitance of the combination, C = 4[tex]\pi[/tex]ε₀r₁r₂/(r₁ - r₂)
C = 11.1 x 10⁻¹¹ x 50/-5
C = 11.1 x 10⁻¹⁰F
To learn more about capacitance, click:
https://brainly.com/question/28445252
#SPJ4
a constant force of 15 n in the negative y direction acts on a particle as it moves from the origin to the point m. how much work is done by the given force during this displacement?
The work done by the given force during this displacement is -45 J.
Force acting on the particle, F = -15j N
The displacement of the particle, s = 3i + 3j - 1k
Therefore, the work done by the force is the dot product of the force and displacement.
W = F.s
W = (-15j).(3i + 3j - 1k)
W = -15j.3j
W = -45 J
To learn more about work done, click:
https://brainly.com/question/30073908
#SPJ4
Masses are distributed in the xy-plane as follows: 10 kg at (2.0, 6.0) m, 4.0 kg at (2.0, 0.0) m, and 6.0 kg at (0.0, 3.0) m. Where would a 20-kg mass need to be positioned so that the center of gravity of the resulting four mass system would be at the origin?
The 20-kg mass needs to be positioned at approximately (-3.9, -0.1) m to balance the four-mass system at the origin, which is the center of gravity of the four-mass system.
To find the center of gravity of the four-mass system, we need to find the coordinates of the point where the resultant gravitational force on the system would act. We can do this by finding the moments of the masses about the x and y axes and then dividing them by the total mass of the system.
Let's denote the coordinates of the unknown mass by (x, y).
The moment of the 10 kg mass about the x-axis is:
Mx1 = 10 kg × 6.0 m = 60 kg·m
The moment of the 4.0 kg mass about the x-axis is:
Mx2 = 4.0 kg × 0.0 m = 0 kg·m
The moment of the 6.0 kg mass about the x-axis is:
Mx3 = 6.0 kg × 3.0 m = 18 kg·m
The moment of the unknown mass about the x-axis is:
Mx4 = 20 kg × x
The total moment about the x-axis is:
Mx = Mx1 + Mx2 + Mx3 + Mx4 = 60 kg·m + 0 kg·m + 18 kg·m + 20 kg × x
Similarly, the moment of the 10 kg mass about the y-axis is:
My1 = 10 kg × 2.0 m = 20 kg·m
The moment of the 4.0 kg mass about the y-axis is:
My2 = 4.0 kg × 0.0 m = 0 kg·m
The moment of the 6.0 kg mass about the y-axis is:
My3 = 6.0 kg × (-3.0 m) = -18 kg·m
The moment of the unknown mass about the y-axis is:
My4 = 20 kg × y
The total moment about the y-axis is:
My = My1 + My2 + My3 + My4 = 20 + 0 - 18 + 20 kg × y
To find the coordinates of the center of gravity, we set the total moments about both axes to zero:
Mx = 60 + 18 + 20 kg × x = 0
My = 20 kg·m - 18 + 20 kg × y = 0
Solving for x and y, we get:
x = -(60 + 18 )/(20 kg) = -3.9 m
y = (18 - 20 )/(20 kg) = -0.1 m
Therefore, the 20-kg mass needs to be positioned at approximately (-3.9, -0.1) m to balance the four-mass system at the origin.
To learn more about center of gravity, refer to:
https://brainly.com/question/24553858
#SPJ4
The 20-kg mass needs to be positioned at (-1.5, 4.5) m to have the center of gravity at the origin.
Where should a 20-kg mass be placed to achieve a center of gravity at the origin?The center of gravity of a system is the point at which the entire mass of the system can be considered to be concentrated. To determine the position of the 20-kg mass, we need to calculate the coordinates of the center of gravity of the given masses and then find the position that would balance the system at the origin.
First, we calculate the x-coordinate of the center of gravity (CG):
CG_x = (m1 * x1 + m2 * x2 + m3 * x3 + m4 * x4) / (m1 + m2 + m3 + m4)
Using the given masses and their respective x-coordinates:
CG_x = (10 kg * 2.0 m + 4.0 kg * 2.0 m + 6.0 kg * 0.0 m + 20 kg * x4) / (10 kg + 4.0 kg + 6.0 kg + 20 kg)
CG_x = (20 kg + 8.0 kg) / 40 kg = 28.0 kgm / 40 kg = 0.7 m
Next, we calculate the y-coordinate of the center of gravity (CG):
CG_y = (m1 * y1 + m2 * y2 + m3 * y3 + m4 * y4) / (m1 + m2 + m3 + m4)
Using the given masses and their respective y-coordinates:
CG_y = (10 kg * 6.0 m + 4.0 kg * 0.0 m + 6.0 kg * 3.0 m + 20 kg * y4) / (10 kg + 4.0 kg + 6.0 kg + 20 kg)
CG_y = (60.0 kgm + 18.0 kgm) / 40 kg = 78.0 kgm / 40 kg = 1.95 m
Therefore, to have the center of gravity at the origin (0, 0), the 20-kg mass should be positioned at (-1.5, 4.5) m.
Learn more about Masses
brainly.com/question/11954533
#SPJ11
according to bohr's model, when does an electron emit electromagnetic radiation? group of answer choices when it is absorbing heat when it is increasing in electromagnetic activity when it is changing from an orbit of higher energy to a lower one when it is changing from an orbit of lower energy to a higher one
According to Bohr's model, an electron emits electromagnetic radiation when it is changing from an orbit of higher energy to a lower one.
An electron emits electromagnetic radiation when it is changing from an orbit of higher energy to a lower one. This is because when an electron moves from a higher energy level to a lower one, it releases energy in the form of electromagnetic radiation. Conversely, when an electron moves from a lower energy level to a higher one, it absorbs energy and does not emit radiation.when an electron gains energy, it moves away from nucleus (from low energy state to a higher energy state) . When an electron falls from higher energy state to lower energy state, it emits energy in form of radiations.
Learn more about electron here: https://brainly.com/question/12001116
#SPJ11
In an isolated system, a hot piece of copper comes in contact with a cold piece of aluminum which has a specific heat twice as high as copper. They will eventually reach the same final temperature, but which object experiences the greater loss or gain of heat in the process?
In an isolated system, a hot piece of copper comes in contact with a cold piece of aluminum. The aluminum has a specific heat twice as high as copper. The object that experiences the greater loss of heat is the hot copper, while the object that experiences the greater gain of heat is the cold aluminum.
In an isolated system, when a hot piece of copper comes in contact with a cold piece of aluminum, heat energy will transfer from the hot copper to the cold aluminum until they both reach the same final temperature. The specific heat of aluminum is twice as high as copper, which means that it requires more heat energy to raise the temperature of aluminum by 1°C than it does for copper. Therefore, the aluminum will experience a greater gain of heat energy as it absorbs the heat from the copper. Conversely, the copper will experience a greater loss of heat energy as it transfers its heat to the aluminum.
Learn more about isolated system here:
https://brainly.com/question/30079145
#SPJ11
