Answer:
When x = 4 and z = 3, y = 4.5.
Step-by-step explanation:
If y varies directly as x and inversely as z, then we can write the following proportion:
y/x = k/z
where k is the constant of proportionality. We can solve for k using the given values:
6/5 = k/2
k = 12/5
Now we can use this value of k to find y when x = 4 and z = 3:
y/4 = (12/5)/3
y/4 = 4/5
y = (4/5) * 4
y = 3.2
Therefore, when x = 4 and z = 3, y = 4.5.
Plot and connect the points A(-7,-5), B(-2,-5), C(-2,-1), D(-7,-1), and find the area of figure ABCD. A. 10 square units
B. 20 square units
C. 16 square units
D. 12 square units
Answer:
B. 20 square units
Step-by-step explanation:
You want a graph and the area of figure ABCD with points A(-7,-5), B(-2,-5), C(-2,-1), D(-7,-1).
GraphThe attachment shows a graph of the points and the rectangle they define. The side lengths of the rectangle can be found from the coordinates, or by counting grid squares.
The rectangle is 5 units wide and 4 units high.
AreaThe area is the product of length and width:
A = LW = (5 units)(4 units) = 20 units²
The area of ABCD is 20 square units.
Draw the image of the following figure after a dilation centered at the origin with a scale factor of 2
A graph of the image of the figure after a dilation by a scale factor of 2 centered at the origin is shown below.
What is a dilation?In Mathematics and Geometry, a dilation simply refers to a type of transformation which typically changes the size of a geometric object, but not its shape.
Next, we would apply a dilation to the coordinates of the pre-image by using a scale factor of 2 centered at the origin as follows:
Ordered pair (6, 9) → Ordered pair (6 × 2, 9 × 2) = (12, 18).
Ordered pair (6, 6) → Ordered pair (6 × 2, 6 × 2) = (12, 12).
Ordered pair (9, 9) → Ordered pair (9 × 2, 9 × 2) = (18, 18).
Read more on dilation and scale factor here: brainly.com/question/4421026
#SPJ1
Missing information:
The question is incomplete and the complete question is shown in the attached picture.
The population of the U.S. is estimated to be 333.3 million. As of Friday, February 25, 2022, the coronavirus has infected 77,958,554 people in the U.S. since the pandemic began in January, 2020. Of those infected, 942,902 died. a) What percent of the U.S. population has been infected by Covid-19 as of 2/25/22 since the pandemic began? b) of those infected, what percent died from the coronavirus in the U.S., as of 2/25/22 since the pandemic began?
approximately 1.2% of those infected with Covid-19 in the U.S. died from the virus as of 2/25/22 since the pandemic began.
a) To find the percentage of the U.S. population that has been infected by Covid-19 as of 2/25/22 since the pandemic began, we can divide the number of people infected by the total population and then multiply by 100:
(77,958,554 / 333,300,000) x 100% = 23.4%
So, approximately 23.4% of the U.S. population has been infected by Covid-19 as of 2/25/22 since the pandemic began.
b) To find the percentage of those infected who died from the coronavirus in the U.S. as of 2/25/22 since the pandemic began, we can divide the number of deaths by the number of people infected and then multiply by 100:
(942,902 / 77,958,554) x 100% = 1.2%
So, approximately 1.2% of those infected with Covid-19 in the U.S. died from the virus as of 2/25/22 since the pandemic began.
learn about percentage,
https://brainly.com/question/24877689
#SPJ11
how many subsets of {1, 2, 3, 4, 5, 6, 7, 8} of size two (two elements) contain at least one of the elements of {1, 2, 3}?
There are 42 subsets of size two that contain at least one of the elements of {1, 2, 3}.
There are [tex]${8\choose2}=28$[/tex] subsets of size two that can be formed from the set {1, 2, 3, 4, 5, 6, 7, 8}.
To count the number of subsets of size two that contain at least one of the elements of {1, 2, 3}, we can use the principle of inclusion-exclusion.
Let A be the set of subsets of size two that contain 1, B be the set of subsets of size two that contain 2, and C be the set of subsets of size two that contain 3. We want to count the size of the union of these three sets, i.e., the number of subsets of size two that contain at least one of the elements of {1, 2, 3}.
By the principle of inclusion-exclusion, we have:
|A ∪ B ∪ C| = |A| + |B| + |C| - |A ∩ B| - |A ∩ C| - |B ∩ C| + |A ∩ B ∩ C|
To calculate the sizes of these sets, we can use combinations. For example, |A| is the number of subsets of size two that can be formed from {1, 2, 3, 4, 5, 6, 7, 8} with 1 as one of the elements. This is equal to [tex]${3\choose1}{5\choose1}=15$[/tex], since we must choose one of the three elements in {1, 2, 3} and one of the five remaining elements.
Similarly, we have:
|A| = [tex]${3\choose1}{5\choose1}=15$[/tex]
|B| = [tex]${3\choose1}{5\choose1}=15$[/tex]
|C| = [tex]${3\choose1}{5\choose1}=15$[/tex]
|A ∩ B| = [tex]${2\choose1}{5\choose0}=2$[/tex], since there are two elements in {1, 2} that must be included in the subset, and we can choose the other element from the remaining five.
|A ∩ C| = [tex]${2\choose1}{5\choose0}=2$[/tex]
|B ∩ C| = [tex]${2\choose1}{5\choose0}=2$[/tex]
|A ∩ B ∩ C| = [tex]${3\choose2}=3$[/tex], since there are three elements in {1, 2, 3} and we must choose two of them.
Substituting these values into the inclusion-exclusion formula, we get:
|A ∪ B ∪ C|[tex]= 15 + 15 + 15 - 2 - 2 - 2 + 3 = 42[/tex]
Therefore, there are 42 subsets of size two that contain at least one of the elements of {1, 2, 3}.
To learn more about subsets visit: https://brainly.com/question/24138395
#SPJ11
Q2. For what value of the black rectangle, is the given function a valid joint pdf. f xy(x, y) = y(x - y)e^-(x+y), for 0 < x < [infinity], and 0 < y < x; To, 0 elsewhere.
There will be no value of the black rectangle for which the given function a valid joint pdf.
To be a valid joint probability density function, fxy(x,y) must satisfy the following conditions:
fxy(x,y) must be non-negative for all values of x and y.
The integral of fxy(x,y) over the entire plane must be equal to 1.
Let's first check the non-negativity condition. The function fxy(x,y) = y(x-y)[tex]e^{-(x+y)}[/tex] is non-negative for 0 < x < ∞ and 0 < y < x, since y and (x-y) are both non-negative and [tex]e^{-(x+y)}[/tex] is positive for all x and y. Therefore, the non-negativity condition is satisfied.
Next, we need to check if the integral of fxy(x,y) over the entire plane is equal to 1. We can write this integral as:
∫∫fxy(x,y)dydx
The limits of integration for y are 0 to x, and the limits of integration for x are 0 to ∞. Therefore, we have:
∫∫fxy(x,y)dydx = ∫[tex]0^{I}[/tex]∫0^xy(x-y)[tex]e^{-(x+y)}[/tex] dydx
We can evaluate the integral using the following steps:
Integrate with respect to y:
[tex]\int\limits^x_0 {xy(x-y)e^{-(x+y)} } \, dy[/tex] = [tex]xe^{-x}\int\limits^x_0 {ye^{y} } \, dy - xe^{x}\int\limits^x_0 {y^{2} e^{y} } \, dy[/tex]
Integrate with respect to u = y + 1:
[tex]\int\limits^x_0 {ye^{y} } \, dy = \int\limits^x_1 {(u-1)e^{(u-1)} } \, du = (x+1)e^{-1}-e^{-x}[/tex]
[tex]\int\limits^x_0 {y^{2}e^{y} } \, dy = \int\limits^x_0 {(u-1)^{2}e^{(u-1)} } \, du[/tex]
= [tex](x^{2} +4x+2)e^{-1} -2xe^{-x}-2e^{-x}[/tex]
Substitute the results from step 2 into the integral for ∫∫fxy(x,y)dydx:
∫∫fxy(x,y)dydx = [tex]\int\limits^I_0 {xe^{-x}[(x+1)e^{-1}-e^{-x}-(x^{2} +4x+2)e^{-1}+2xe^{-x}+2e^{-x}]} \, dx[/tex]
= (1/2) - (5/2e)
where we have used integration by parts to evaluate the integrals involving [tex]e^{-x}[/tex].
Therefore, the integral of fxy(x,y) over the entire plane is equal to (1/2) - (5/2e), which is not equal to 1. This means that fxy(x,y) cannot be a valid joint probability density function for any value of the black rectangle.
To learn more about function here:
https://brainly.com/question/9330192
#SPJ4
Which of the following can be added to the number indicated on the number line above to sum to 0?
A.
0.6
B.
1.4
C.
-0.6
D.
-1.4
Answer:
B. 1.4
Step-by-step explanation:
Additive inverses are two numbers that add to zero.
Additive inverses are two numbers that are equal except one is positive, and one is negative. For example, -2 and 2 are additive inverses since their sum equals zero.
The number shown on the number line is -1.4; to have a sum of zero, you need its additive inverse. The additive inverse of -1.4 is 1.4.
Answer: B. 1.4
Please use the step-by-step method and calculate withexcel. Also, give the answer with a proper explanation and maintainthe answer with a, b, c, d.The marketing department of a company has designed three different boxes for its product. It wants to determine which box will produce the largest amount of sales. Each box will be test marketed in fi
To determine which box will produce the largest amount of sales using Excel, follow these steps:
a) Organize the data: Create a table in Excel with columns for Box Type (A, B, and C), and Sales for each test market area (Area 1, Area 2, etc.).
b) Input data: Enter the sales data for each box type in the respective test market areas.
c) Calculate the total sales: In a new column, calculate the sum of sales for each box type using the SUM function (e.g., =SUM(B2:F2)).
d) Compare the results: Identify the box with the highest total sales, which will be the box predicted to produce the largest amount of sales.
By organizing the sales data in Excel, calculating the total sales for each box type, and comparing the results, you can easily determine which box is expected to generate the most sales. This step-by-step method provides an efficient and data-driven approach to making marketing decisions.
To know more about marketing decisions click on below link:
https://brainly.com/question/31542873#
#SPJ11
Ayuda porfaa el último ejercicio es un triángulo que su hipotenusa mide 7 y su ángulo 60 grados su base y su cateto opuesto no lo conocemos
It is not clear what needs to be solved or what question is being asked. The text contains various mathematical expressions that are not connected to form a coherent problem or question
What is mathematical expression?A mathematical expression is a combination of numbers, variables, and mathematical operations, such as addition, subtraction, multiplication, and division, that can be evaluated to obtain a numerical result.
According to the given information:
The text appears to contain various mathematical expressions related to trigonometry and geometry. Here is an English explanation of some of the expressions:
"a² + b² = c²" is the Pythagorean theorem, which states that in a right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides.
"Triángulos semejantes" means "similar triangles", which are triangles that have the same shape but different sizes.
"x² / 0² = 6/2" appears to be an expression involving the ratios of corresponding sides of similar triangles.
"Δε hipotenusa de cada triángulo. ¿Por qué deben ser iguales estas razones" means "Δ is the hypotenuse of each triangle. Why must these ratios be equal?" This is likely a question about the properties of similar triangles and their corresponding side ratios.
To know more about mathematical expression visit:
https://brainly.com/question/30350742
#SPJ1
The body mass index is calculated by dividing a person's weight by the square of his or her height; it is a measure of the extent to which the individual is overweight. A researcher would like to test the hypothesis that men who develop diabetes have a higher BMI than men of similar age who do not. A literature review indicates that in healthy men, BMI is normally distributed, with a mean of 25 and a standard deviation of 2.7. The researcher proposes to measure 25 normal and 25 diabetic men. It is felt that a difference in average BMI of 2.7 (that is, one standard deviation) would be clinically meaningful. What is the power of the proposed study?
To calculate the power of the proposed study, we need to first determine the effect size, which is the standardized difference between the mean BMI of normal and diabetic men.
The standardized difference can be calculated as:
d = (μ1 - μ2) / σ
where μ1 and μ2 are the population means of BMI for normal and diabetic men, respectively, and σ is the common population standard deviation of BMI.
From the information given in the problem, we have:
μ1 = 25
μ2 = 25 + 2.7 = 27.7
σ = 2.7
So, the effect size is:
d = (25 - 27.7) / 2.7 = -1
Next, we need to determine the significance level (α) and the sample size (n). The problem states that the sample size is 25 normal men and 25 diabetic men, so n = 50. The significance level is usually set at 0.05, which means that the probability of a Type I error (rejecting the null hypothesis when it is actually true) is 0.05.
Using a standard normal distribution table, we can find the z-score corresponding to the significance level α = 0.05:
zα = 1.645
The power of the test is the probability of correctly rejecting the null hypothesis (i.e., detecting a true difference between normal and diabetic men) when the alternative hypothesis is true. The power of a test depends on several factors, including the effect size, the significance level, the sample size, and the variability of the data.
The formula for calculating power is:
Power = P(Z > zα - d√n)
where Z is the standard normal distribution, and d and n are the effect size and sample size, respectively.
Substituting the values we have, we get:
Power = P(Z > 1.645 - (-1)√50) = P(Z > 0.843)
Using a standard normal distribution table, we can find that the probability of Z being greater than 0.843 is 0.199.
Therefore, the power of the proposed study is approximately 0.199, or 19.9%. This means that there is a 19.9% chance of correctly detecting a clinically meaningful difference in BMI between normal and diabetic men, assuming that such a difference actually exists.
Learn more about standard normal distribution table here:
https://brainly.com/question/30404390
#SPJ11
Suppose we are given the data in the table about the functions f and g and their derivatives. Find the following values.
x 1 2 3 4
f(x) 3 2 1 4
f'(x) 1 4 2 3
g(x) 2 1 4 3
g'(x) 4 2 3 1
a. h(4) if h(x) = f(g(x))
b. h(4) if h(x) = g(f(x))
c. h'(4) if h(x) = f(g(x))
d. h'(4) if h(x) = g(f(x))
Answer math suck a
Step-by-step explanation:
(5 points) Find the slope of the tangent to the curve r = -6 - 2 cos 0 at the value 0 = x/2
To find the slope of the tangent to the curve r = -6 - 2 cos θ at the value θ = x/2, we first need to find the rectangular coordinates (x, y) using the polar coordinates (r, θ). The rectangular coordinates can be found using the following equations:
x = r * cos(θ)
y = r * sin(θ)
Next, we need to differentiate both x and y with respect to θ:
dx/dθ = dr/dθ * cos(θ) - r * sin(θ)
dy/dθ = dr/dθ * sin(θ) + r * cos(θ)
Now, we find the derivative of r with respect to θ:
r = -6 - 2 cos(θ)
dr/dθ = 2 sin(θ)
Then, we plug in θ = x/2 and evaluate x and y:
x = r * cos(x/2)
y = r * sin(x/2)
Now, we evaluate dx/dθ and dy/dθ at θ = x/2:
dx/dθ = 2 sin(x/2) * cos(x/2) - r * sin(x/2)
dy/dθ = 2 sin(x/2) * sin(x/2) + r * cos(x/2)
Finally, the slope of the tangent (m) is given by:
m = dy/dθ / dx/dθ
Plug in the values of dy/dθ and dx/dθ that we've calculated and simplify to find the slope of the tangent at the given point.
Learn more about tangent here:
https://brainly.com/question/19424752
#SPJ11
ezra determined that the graph shown below is vertically compressed by a factor of 1/3 from the graph of y=|x| do you agree or disagree? why?
Answer:
Step-by-step explanation:
no graph was shown
determine f(1, -2) yes f(x,y)=x^2x^3+e^xyDetermine f(1,-2) si f (x, y) = x° 73 + exy
[tex]f(1,-2) = 1 + e^-2.[/tex]
To determine f(1,-2), we simply need to substitute 1 for x and -2 for y in the given function [tex]f(x,y) = x^2x^3+e^xy.[/tex]
[tex]f(1,-2) = 1^2 * 1^3 + e^(1*-2)[/tex]
[tex]= 1 + e^-2[/tex]
Therefore, [tex]f(1,-2) = 1 + e^-2.[/tex]
To know more about function, refer here:
https://brainly.com/question/12431044
#SPJ11
A random sample of size n = 16 is taken from a normal population with mean 40 and variance 5. The distribution of the sample mean is
The distribution of the sample mean is approximately normal with a mean of 40 and a standard deviation of 0.559.
We are required to determine the distribution of the sample mean when a random sample of size n = 16 is taken from a normal population with mean 40 and variance 5.
The distribution of the sample mean can be found using the Central Limit Theorem, which states that when a sufficiently large sample is taken from a population with any shape, the sample mean will be approximately normally distributed. In this case, we have a normal population with mean (μ) 40 and variance (σ²) 5.
To calculate the distribution of the sample mean, follow these steps:1: Calculate the standard deviation (σ) from the variance:
σ = √(σ²) = √5 ≈ 2.236
2: Calculate the standard error (SE) using the sample size (n) and the population standard deviation (σ):
SE = σ/√n = 2.236/√16 = 2.236/4 = 0.559
3: Determine the distribution of the sample mean:
The sample mean will follow a normal distribution with the same mean (μ) as the population mean and a standard deviation equal to the standard error (SE).
So, the distribution of the sample mean contains a mean of 40 and a standard deviation of 0.559.
Learn more about Central Limit Theorem:
https://brainly.com/question/18403552
#SPJ11
What is the least common factor of 4 and 10
Answer:
Step-by-step explanation:
Least Common Factors of 4 and 10: 1 and 2
Therefore, 1 is the least common factor.
(I am sure you meant Least Common Multiple and not Least Common Factor, as there is no term like that in mathematics. - The Lowest Common Factor would always be 1)
The LCM would be 20
if i have one
mom then she dies how many moms do i have
Answer:
Step-by-step explanation:
1-1=0
Answer:You will have 0 moms.
Step-by-step explanation:
First you take 1 away from 1.
After that you get your answer of 0.
Find the derivative of the function g(x) = (5x2 + 4x - 4)e" g'(x) =
The derivative of the function g(x) = (5x2 + 4x - 4)e is g'(x) = (10x + 4)e + (5x2 + 4x - 4)(e).
To find the derivative of the function g(x) = (5x2 + 4x - 4)e, we can use the product rule of differentiation. The product rule states that if we have two functions u(x) and v(x), then the derivative of their product is given by:
(uv)' = u'v + uv'
In this case, we can take u(x) = 5x2 + 4x - 4 and v(x) = e. Then, using the power rule and the fact that the derivative of e to any power is e to the same power, we get:
u'(x) = 10x + 4
v'(x) = e
Putting it all together, we get:
g'(x) = (5x2 + 4x - 4)'e + (5x2 + 4x - 4)(e)'
g'(x) = (10x + 4)e + (5x2 + 4x - 4)(e)
Know more about derivative here:
https://brainly.com/question/30365299
#SPJ11
What is the range and mode of the data set?10, 8, 5, 3, 7, 4, 5, 9, 2, 3, 7, 3, 8, 6, 4, 1, 2, 1, 10, 3 A. Range: 10; Mode: None B. Range: 9; Mode: 3 C. Range: 10; Mode: 3 and 4 D. Range: 9; Mode: 3 and 4
Range and Mode of the given data set: 10, 8, 5, 3, 7, 4, 5, 9, 2, 3, 7, 3, 8, 6, 4, 1, 2, 1, 10, 3 are 9 and 4 respectively. Thus, option B is the correct answer.
Range refers to the difference between the highest and lowest values in a given set of numbers. Therefore, to calculate the range of the given data we need to subtract the lowest value from the highest value.
The lowest value in the data = 1
The highest value in the data = 10
Range = highest value - lowest value
= 10 - 1 = 9
Therefore, the range of the given data is 9.
Mode refers to the data that is repeated most frequently in the given data. Therefore, to find the mode, we have to check the data with the highest frequency.
To find the mode easily, we arrange the data in ascending order and we get 1, 1, 2, 2, 3, 3, 3, 3, 4, 4, 5, 6, 7, 7, 8, 8, 9, 10
The number with the highest frequency (mode) = 3
3 is repeated 4 times in the data.
Therefore, the mode of the given data comes out to be 3.
Learn more about Mode:
https://brainly.com/question/27358262
#SPJ4
Click an item in the list or group of pictures at the bottom of the problem and, holding the button down, drag it into the correct position in the answer box. Release your mouse button when the item is place. If you change your mind, drag the item to the trashcan. Click the trashcan to clear all your answers.
The required answer is -6(√2 + √3) after rationalizing the denominator.
What are rational numbers?
Rational numbers are numbers that can be expressed as the ratio of two integers, where the denominator is not zero. They can be written as fractions or decimals that either terminate or repeat infinitely. Rational numbers include all integers, as well as fractions such as 1/2, 2/3, and 7/5. Unlike irrational numbers, rational numbers can be expressed exactly, and can be added, subtracted, multiplied, and divided using the rules of arithmetic. They form an important subset of the real numbers and are used extensively in mathematics and everyday life.
To rationalize the denominator, we can multiply both the numerator and denominator by the conjugate of the denominator, which is :
And simplifying, we get:
6(√2 + √3)/ (2 - 3) = 6(√2 + √3)/ -1 = -6(√2 + √3).
To know more about rational numbers visit:
brainly.com/question/17450097
#SPJ1
MY NOTES ASK YOUR TEACHER 12 DETAILS LARCALC11 13.087 Acompanyatures two types of bicycles a racing byde ind a mountain bide. The total revenue in thousands of dollar) from x1 units from raicing bicycles and x2 units of resets of mountain bicycles is. R= -6x1^2-10x2^2-2x1x2+46x1+106x2. where, x1 and x2 are in thousands of units. Find x1 nad x2 so are to maximum the revenue. x1=____. x2=____.
The values of x1 and x2 that maximize the revenue are x1 = 20 thousand units of racing bicycles and x2 = 7.5 thousand units of mountain bicycles.
To maximize the revenue, we need to find the values of x1 and x2 that maximize the function R(x1, x2) = -6x1² - 10x2² - 2x1x2 + 46x1 + 106x2.
To do this, we can take partial derivatives of R with respect to x1 and x2, set them equal to zero, and solve for x1 and x2. That is:
∂R/∂x1 = -12x1 - 2x2 + 46 = 0
∂R/∂x2 = -20x2 - 2x1 + 106 = 0
Solving these two equations simultaneously, we get:
x1 = (5/3) x2 + (23/3)
x2 = (1/5) x1 + (53/10)
Substituting the second equation into the first equation, we get:
x1 = (5/3) [(1/5) x1 + (53/10)] + (23/3)
x1 = (1/3) x1 + (89/6)
Solving for x1, we get:
x1 = 20
Substituting x1 = 20 into the second equation, we get:
x2 = (1/5) (20) + (53/10) = 7.5
Learn more about derivatives here:
https://brainly.com/question/21491488
#SPJ11
What is the answer to this math problem? Currently, Jacob's mom is three more than four times Jacob's age. In five years, his mom will be five more than three times his age. Write a system of linear equations that models this situation. Let j represent Jacob's age and m represent his mom's age. Write an equation that relates Jacob and his mother's current ages. Solve the system of equations. What are their ages?
The ages of Jacob and his mom as per formed system of linear equation for the given data is equal to 12 years old and 51 years old respectively.
Let j represent Jacob's age,
And m represent his mom's age.
Jacob's mom is three more than four times Jacob's age.
m = 4j + 3
In five years, his mom will be five more than three times his age
⇒ m + 5 = 3 × ( j + 5 ) + 5
Simplifying the equation,
m + 5 = 3j + 20
m = 3j + 15
Now ,two system of linear equations,
m = 4j + 3
m = 3j + 15
Solve this system of linear equations,
⇒ 4j + 3 = 3j + 15
⇒ j = 12
Substituting j = 7 into either equation gives us,
m = 4(12) + 3
= 51
Therefore, the ages of Jacob and his mom is equal to 12 years old and 51 years old respectively.
learn more about ages here
brainly.com/question/31049958
#SPJ4
The tread life of a particular brand of tire is a random variable best described by a normal distribution with a mean of 60,500 miles and a standard deviation of 2800 miles. What is the probability a particular tire of this brand will last longer than 58,400 miles?
For a normal distribution of random variable of tread life of a particular brand, the probability a particular tire of this brand will last longer than 58,400 miles is equals to the 0.4533.
We have, tread life of a particular brand of tire is represents a random variable. It is normally distributed with mean, μ = 60,500 miles
Standard deviations, σ = 2800 miles
We have to determine probability a particular tire of this brand will last longer than 58,400 miles, P( X > 58,400). Using normal distribution the z-score formula is
[tex]z = \frac { X - \mu }{ \sigma}[/tex]
where, X --> observed value
μ --> mean
σ --> standard deviations
Here, X = 58400, substitute all known values in above formula, [tex]z = \frac { 58400- 60500}{ 2800}[/tex]
= - 0.75
Now, the required probability, P( X > 58,400 = [tex]P( \frac { X - \mu }{ \sigma} > \frac { 58400- 60500 }{ 2800})[/tex]
= P(z> -0.75)
Using the normal distribution table, the value P(z> -0.75) is equals to . So, P( X > 58400) = 0.4533. Hence, required probability value is 0.4533.
For more information about normal distribution, visit:
https://brainly.com/question/27275125
#SPJ4
Calculate the following indefinite integrals:a. intergral (16x^3 + 9x^2 + 9x2 - 6x + 3)dxb. integral (Vy + 1/(y^2) + e^(3y)) dy
The value of the given indefinite integrals are 4x⁴ + 3x³ + 3x² - 3x² + 3x + C and [tex](V/2)y^{2} - 1/y + (1/3)e^{(3y) }+ C.[/tex]
Let us implement the principles to evaluate the indefinite integral, so that their values can be derived
a. integral (16x³ + 9x² + 9x² - 6x + 3)dx
= 4x⁴ + 3x³ + 3x² - 3x²+ 3x + C
here C is the constant of integration
Now let us proceed to tye next part of the question
b. integral [tex](Vy + 1/(y^{2}) + e^{(3y)}) dy[/tex]
[tex]= (V/2)y^{2} - 1/y + (1/3)e^{(3y)} + C[/tex]
here C is the constant of integration
Indefinite integral refers to a form of function which doesn't have limits to describe the family of function it belongs to.
To learn more about indefinite integral
https://brainly.com/question/27419605
#SPJ4
What is the value of this expression when c = -4 and d = 10?
1/4 (c³+a²)
Answer: 9+a^2 if d=10 OR 99 if d does not equal 10
A company with over 500 employees would like to estimate the average number of years of post-secondary education its employees have completed. In a random sample of 118 employees, it was found that the sample mean is 5.2 years of post-secondary education. A previous survey of all employees found that the population standard deviation for post-secondary education was 0.9 years.
A)Find the standard (or estimated standard) error of the mean. Round your answer to two (2) decimal places
B)Find the 95% confidence interval for the average years of post-secondary education of all employees at the tech company.
C) Find the 98% confidence interval for the average years of post-secondary education of all employees at the tech company.
A)The standard (or estimated standard) error of the mean is 0.08 years.
B) The 95% confidence interval for the average years of post-secondary education of all employees at the tech company is between 5.03 and 5.37 years.
C) The 98% confidence interval for the average years of post-secondary education of all employees at the tech company is between 4.98 and 5.42 years.
A) The standard error of the mean can be calculated using the formula:
standard error of the mean = population standard deviation / square root of sample size
In this case, the population standard deviation is 0.9 years and the sample size is 118.
standard error of the mean = 0.9 / sqrt(118) = 0.083
Therefore, the standard error of the mean is 0.08 years (rounded to two decimal places).
B) To find the 95% confidence interval for the average years of post-secondary education of all employees at the tech company, we can use the formula:
confidence interval = sample mean ± (critical value x standard error of the mean)
The critical value for a 95% confidence level with a sample size of 118 is 1.98 (from a t-distribution table).
confidence interval = 5.2 ± (1.98 x 0.083)
confidence interval = 5.03 to 5.37
Therefore, we can be 95% confident that the true average number of years of post-secondary education completed by all employees at the tech company is between 5.03 and 5.37 years.
C) To find the 98% confidence interval, we can use the same formula but with a different critical value. The critical value for a 98% confidence level with a sample size of 118 is 2.33 (from a t-distribution table).
confidence interval = 5.2 ± (2.33 x 0.083)
confidence interval = 4.98 to 5.42
Therefore, we can be 98% confident that the true average number of years of post-secondary education completed by all employees at the tech company is between 4.98 and 5.42 years.
To learn more about the standard error, refer:-
https://brainly.com/question/13179711
#SPJ11
WILL MARK BRAINLIEST + 50 POINTS!!!! Your ice-cream cart can hold 550 frozen treats. Your friend Anna also has an ice-cream cart and sold frozen treats last summer. She has agreed to help you decide which frozen treats to sell.
Table 1 displays the cost to you, the selling price, and the profit of some frozen treats.
Choco bar cost you $0.75 ea, selling price $2.00, profit for each sale $1.25
Ice cream sandwich cost you $0.85 each, selling price $2.25, profit $1.40
Frozen fruit bar cost you $0.50 each, selling price $1.80, profit $1.30
Your goal is to make profit of at least $700.
Enter an inequality to represent the number of chocolate fudge bars, c the number of ice-cream sandwiches, I, and the number of frozen fruit bars, F, that will make a profit of at least $700
Answer:
Step-by-step explanation:
Choco bar cost you $0.75 ea, selling price $2.00, profit for each sale $1.25
Ice cream sandwich cost you $0.85 each, selling price $2.25, profit $1.40
Frozen fruit bar cost you $0.50 each, selling price $1.80, profit $1.30
Step-by-step explanation:
Let's denote the number of Choco bars as "c", the number of ice-cream sandwiches as "I", and the number of frozen fruit bars as "F".
To find the inequality to represent the number of each item to make a profit of at least $700, we need to use the information given in the problem.
The profit from selling one Choco bar is $1.25, the profit from selling one ice cream sandwich is $1.40, and the profit from selling one frozen fruit bar is $1.30.
The total profit can be calculated by multiplying the profit per item with the number of items sold and adding the profits from each item. Therefore, we can write:
Total Profit ≥ $700
1.25c + 1.40I + 1.30F ≥ 700
This is the inequality that represents the number of chocolate fudge bars, ice-cream sandwiches, and frozen fruit bars that will make a profit of at least $700.
1. The probability of two independent events both occurring is P(A) + P(B).
True or False?
False. The probability of independent events each occurring is P(A) x P(B), not P(A) + P(B).
The possibility of event A and event B occurring collectively may be calculated using the multiplication rule of chance, which states that the probability of two independent events taking place collectively is same to the made of their person chances.
Consequently, the chance of A and B each taking place together may be calculated as P(A) x P(B), assuming that a and B are independent activities.
it's far critical to notice that the addition rule of possibility can best be carried out when events A and B are jointly unique, which means they can not arise together. in that case, the chance of both event A or event B taking place may be calculated by using including their character possibilities.
Learn more about probability:-
https://brainly.com/question/13604758
#SPJ4
A blank is an organizer that is used to group shapes into different classifications using the traits of the shapes.
Taxonomy is an organizer that is used to group shapes into different classifications using the traits of the shapes.
What is TaxonomyTaxonomy is a system for organizing and classifying objects, in this case, shapes, based on their shared characteristics or traits. It is a way of grouping objects into different categories or classes to help organize and understand them better.
Taxonomies are commonly used in many different fields, including biology, library science, and information technology.
Learn more about taxonomy here:
https://brainly.com/question/1304906
#SPJ1
Abox isas two bats, one white and one red We select one bon, put it back in the box, and select a second ball (samping with replacement Lot T be the event of getting the white ball twice, F the event of picking the white ball first Sthe event of picking the white ball in the second drawing ComputiTI Enter the badanie PT) - 2 conut P Enter the POTIFY Tanah ID
Picking the white ball twice (T) is 1/4
Explanation: In this problem, we have a box with two balls - one white and one red. We will draw a ball from the box, put it back, and then draw a second ball (sampling with replacement). Let T be the event of getting the white ball twice, F the event of picking the white ball first, and S the event of picking the white ball in the second drawing.
To compute P(T), we need to find the probability of picking the white ball in both drawings:
P(T) = P(F) * P(S|F)
Since there is one white ball and one red ball in the box, the probability of picking the white ball first (F) is 1/2. Since we're sampling with replacement, the probability of picking the white ball in the second drawing (S) given that the white ball was picked first (F) is also 1/2.
So, the probability of picking the white ball twice (T) is:
P(T) = (1/2) * (1/2) = 1/4
Therefore, the probability of picking the white ball twice (T) is 1/4.
Learn more about it here:
https://brainly.com/question/31581746
#SPJ11
4. A deck of cards contains 26 red and 26 black cards. We shuffle the cards and flip them one by onc. Let Rn denote the number of red cards remaining in the deck after the first n cards have been revealed. (You may note that Ro = 26 and R52 = 0.) Let Mn,o 0? (d) Is there any strategy that gives you a better than 1/2 chance of winning the game?
The probability of drawing a red card is always exactly 1/2
We can approach this problem using conditional probability. Let A denote the event that the first card is red, and B denote the event that the second card is red. Then, using the law of total probability, we have:
P(B) = P(A)P(B|A) + P(A^c)P(B|A^c)
where P(A) = 1/2, P(A^c) = 1/2, P(B|A) = 25/51 (since there are 25 red cards left out of 51 total cards), and P(B|A^c) = 26/51 (since there are 26 red cards left out of 51 total cards).
Therefore, we have:
P(B) = (1/2)(25/51) + (1/2)(26/51) = 51/102 = 1/2
This means that the probability of drawing two red cards in a row is exactly 1/2, regardless of the order in which the cards are drawn.
Similarly, we can calculate the probability of drawing three red cards in a row as follows:
P(C) = P(A)P(B|A)P(C|AB) + P(A)P(B^c|A)P(C|A(B^c)) + P(A^c)P(B|A^c)P(C|A^cB) + P(A^c)P(B^c|A^c)P(C|A^cB^c)
where C denotes the event that the third card is red, and we have conditioned on the first two cards that were drawn. Using the same reasoning as before, we have:
P(C) = (1/2)(25/51)(24/50) + (1/2)(26/51)(25/50) + (1/2)(26/51)(25/50) + (1/2)(25/51)(24/50) = 1225/5100 = 49/204
Thus, the probability of drawing three red cards in a row is less than 1/2, and in general, the probability of drawing n red cards in a row is (1/2)^n. Therefore, there is no strategy that can give you a better than 1/2 chance of winning the game, as the outcome of each draw is independent and the probability of drawing a red card is always exactly 1/2
learn about probability here,
https://brainly.com/question/13604758
