To determine the acoustic pressure at a point 2 meters away from a normal conversation with an acoustic pressure of 20,000 μPa at 1 meter distance, we can use the inverse square law.
The inverse square law states that the intensity of a physical quantity is inversely proportional to the square of the distance from the source. In this case, the physical quantity is acoustic pressure.
Here are the steps to calculate the acoustic pressure at 2 meters:
1. Write down the initial acoustic pressure (P1) and distance (d1): P1 = 20,000 μPa, d1 = 1 m.
2. Write down the final distance (d2): d2 = 2 m.
3. Apply the inverse square law formula: P2 = P1 * (d1/d2)^2, where P2 is the final acoustic pressure.
Now, let's plug in the values and calculate the acoustic pressure at 2 meters:
P2 = 20,000 μPa * (1 m / 2 m)^2
P2 = 20,000 μPa * (0.5)^2
P2 = 20,000 μPa * 0.25
P2 = 5,000 μPa
So, the acoustic pressure at a point 2 meters away from the normal conversation is 5,000 μPa.
To know more about acoustic pressure:
https://brainly.com/question/31593519
#SPJ11
What is the radius of an orbit of a satellite that orbits Jupiter once every 16.7 hours? The mass of Jupiter is 1.90x10^27 kg.
The radius of an orbit of a satellite that orbits Jupiter once every 16.7 hours is approximately 2.67 x 10^5 meters.
We'll use the following terms in our calculations: orbital period (T), gravitational constant (G), mass of Jupiter (M), and the radius of the orbit (r).
First, convert the orbital period (T) to seconds:
T = 16.7 hours * (3600 seconds/hour) = 60,120 seconds
Next, use the gravitational constant (G):
G = 6.674 × 10^(-11) m³ kg^(-1) s^(-2)
Recall the mass of Jupiter (M):
M = 1.90 x 10^27 kg
Use Kepler's Third Law to find the semi-major axis of the orbit (a), which is approximately equal to the radius (r) for a circular orbit:
T² = (4π² / GM) * r³
Solve for r:
r³ = (T² * GM) / (4π²)
r³ = (60,120² * 6.674 × 10^(-11) * 1.90 x 10^27) / (4π²)
r³ = 1.898 × 10^16 m³
Finally, find the cube root of r³ to get r:
r = (1.898 × 10^16)^(1/3)
r ≈ 2.67 x 10^5 m
The radius of the satellite's orbit around Jupiter is approximately 2.67 x 10^5 meters.
More on satellite's orbit: https://brainly.com/question/31088912
#SPJ11
An ice cream machine requires a given torque to be applied to the crank. If an operator applies this torque at half the radius in the same amount of time, the operator is expending___times the power.
a. 4
b. 0.5
c. 2
d. 1
The correct answer is c. 2.
This is because power is equal to torque multiplied by angular velocity. The torque required by the ice cream machine remains constant regardless of the radius at which it is applied, but the angular velocity changes.
Since the operator is applying the torque at half the radius, the angular velocity is doubled to maintain the same amount of work. This means that the power expended by the operator is also doubled, resulting in an answer of 2 times the power.
When the operator applies the same torque at half the radius, they must apply twice the force to maintain the same torque. Since power is the product of force and velocity, and the operator is applying the force in the same amount of time, the power expended by the operator is 2 times greater.
To know about Torque please click:-
https://brainly.com/question/19247046
#SPJ11
A pressure of 1.0 ´ 10-7 mm of Hg is achieved in a vacuum system. How many gas molecules are present per liter volume if the temperature is 293 K? (760 mm of Hg = 1 atm, R = 0.082 1 L×atm/mol×K, and NA = 6.02 ´ 1023)
The number of gas molecules is equal to 3.26 x [tex]10^{11[/tex] molecules per liter volume.
To determine the number of gas molecules present per liter volume at the given pressure and temperature, we will use the Ideal Gas Law and Avogadro's number.
Ideal Gas Law: PV = nRT
where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is the temperature.
First, convert the pressure from mm of Hg to atm:
(1.0 x [tex]10^{-7[/tex] mm Hg) * (1 atm / 760 mm Hg) = 1.32 x [tex]10^{-10[/tex] atm
Now, let's use the Ideal Gas Law to find the number of moles (n) in 1 liter of volume:
n = PV / RT
n = (1.32 x [tex]10^{-10[/tex] atm)(1 L) / (0.0821 L atm/mol K)(293 K)
n = 5.42 x [tex]10^{-13[/tex] mol
Finally, use Avogadro's number (NA = 6.02 x [tex]10^{23[/tex]) to find the number of gas molecules in 1 liter of volume:
Number of gas molecules = n * NA
Number of gas molecules = (5.42 x [tex]10^{-13[/tex] mol)(6.02 x [tex]10^{23[/tex])
Number of gas molecules ≈ 3.26 x [tex]10^{11[/tex] molecules per liter volume
Learn more about Ideal Gas Law :
https://brainly.com/question/28257995
#SPJ11
a 2-kg object with a charge of 2 c is released from rest in a region where an electric field is present. the electric potential at the location where it was released was 11 volts. how fast will it be going when it reaches a location where the electric potential is 3 volts?
The speed of the object is 6 m/s when it reaches a location where the electric potential is 3 volts.
To find the speed of the 2-kg object with a charge of 2 c when it reaches a location with an electric potential of 3 volts, we can use the conservation of energy equation,
1/2 [tex]mv^2[/tex] + qΔV = constant
where m is the mass of the object, v is its speed, q is its charge, ΔV is the change in electric potential, and the constant represents the initial energy of the object.
At the initial location where the object was released, the electric potential was 11 volts. Therefore, the initial energy of the object is,
E1 = qV1 = 2 c x 11 V = 22 J
At the location where the electric potential is 3 volts, the final energy of the object will be,
E2 = qV2 = 2 c x 3 V = 6 J
Since the energy is conserved, we can set E1 equal to E2,
1/2 [tex]mv^2[/tex] + qV1 = qV2
Solving for v, we get:
v = √(2q/m)(V1 - V2)
Plugging in the given values, we get:
v = √(2 x 2 C / 2 kg)(11 V - 3 V) = 6 m/s
Therefore, the speed of the object is 6 m/s.
Know more about the Conservation of energy here :
https://brainly.com/question/31514742
#SPJ11
what is doppler effect?
Answer:an increase (or decrease) in the frequency of sound, light, or other waves as the source and observer move toward (or away from) each other.
Explanation:
9. Explain why it is theoretically impossible to see an object as small as an atom regardless of the quality of the light microscope being used
The diffraction limit of a light microscope prevents it from distinguishing between individual atoms.
What is the reason that it is impossible to observe an object as small as an atom?It is theoretically impossible to see an object as small as an atom with a traditional light microscope, regardless of the quality of the instrument being used. This is due to a fundamental limit on the resolution of light microscopes known as the diffraction limit.
The diffraction limit arises because light waves diffract (bend) when they encounter an obstacle or aperture, such as the lenses in a microscope. This diffraction causes the light waves to spread out and interfere with each other, creating a blurred image of the object being viewed. The resolution of a microscope is limited by the smallest distance that can be distinguished between two points in the image, which is proportional to the wavelength of the light used and the numerical aperture of the lenses in the microscope.
The wavelength of visible light is on the order of a few hundred nanometers, which is much larger than the size of an atom (which is typically on the order of picometers). This means that the diffraction limit of a light microscope prevents it from distinguishing between individual atoms, even with the highest quality lenses and most advanced techniques.
To overcome the diffraction limit and observe individual atoms, other imaging techniques such as scanning tunneling microscopy and transmission electron microscopy are used. These methods use different principles to create images with much higher resolution than is possible with a light microscope.
Learn more about diffraction
brainly.com/question/12290582
#SPJ11
Prediction 1-1: For a liquid, how does DT depend on
A. The number of pulses of heat energy you transfer (Q)?
B. The mass (m) of liquid in the cup?
C. The kind of liquid you have?
liquids with different specific heat capacities will require different amounts of heat energy to increase their temperature by the same amount, resulting in different DT values.
A. The DT (change in temperature) of a liquid is expected to depend on the number of pulses of heat energy transferred (Q). If more heat energy is transferred to the liquid, then its temperature will increase by a larger amount, resulting in a larger DT.
B. The DT of a liquid is expected to depend on the mass (m) of liquid in the cup. If there is more liquid in the cup, then it will require more heat energy to increase its temperature by the same amount as a cup with less liquid. Thus, the DT is expected to be smaller for a cup with a larger mass of liquid.
C. The DT of a liquid is expected to depend on the kind of liquid. Different liquids have different specific heat capacities, which is the amount of heat energy required to raise the temperature of a unit mass of the substance by one degree Celsius. Thus, liquids with different specific heat capacities will require different amounts of heat energy to increase their temperature by the same amount, resulting in different DT values.
To learn more about increase visit:
https://brainly.com/question/2285058
#SPJ11
Which temperature scale is used by the U.S. in everyday life?
The United States uses the Fahrenheit scale in everyday life to measure temperature. The Fahrenheit scale is a temperature scale that was proposed by the German physicist Daniel Gabriel Fahrenheit in 1724. In this scale, the freezing point of water is 32°F and the boiling point is 212°F at standard atmospheric pressure. The scale is divided into 180 equal parts between these two points.
The Fahrenheit scale is still used in the United States to measure everyday temperatures, such as the temperature of the air or the temperature of liquids. However, many other countries and scientific fields use the Celsius scale, which is a metric temperature scale based on the freezing and boiling points of water, with 0°C representing the freezing point and 100°C representing the boiling point at standard atmospheric pressure.
It's important to note that both the Fahrenheit and Celsius scales are widely recognized and used around the world, but they represent different temperature ranges and units. It is possible to convert between the two scales using mathematical formulas or conversion charts.
Learn more about temperatures here:
https://brainly.com/question/24746268
#SPJ11
A 4.2-kg mass is placed at (3.0, 4.0) m. Where can an 8.4-kg mass be placed so that the moment of inertia about the z-axis is zero?
Location of an 8.4-kg mass to make moment of inertia about z-axis zero for a 4.2-kg mass at (3.0, 4.0) m.
What is the location for a second mass to make moment of inertia about the z-axis zero?
To find the location where the moment of inertia about the z-axis is zero, we need to place the second mass such that the center of mass of the two masses lies on the z-axis.
The center of mass of the two masses can be found using the following formula:
xcm = (m1x1 + m2x2)/(m1 + m2)
where
The x-coordinate of the centre of mass is denoted by xcm.
The first object's mass is m1.
x1 is the x-coordinate of the first object,
The mass of the second object is m2.
x2 is the x-coordinate of the second object.
Given:
m1 = 4.2 kg
x1 = 3.0 m
m2 = 8.4 kg
x2 = ?
To find x2, we need to set the x-coordinate of the center of mass equal to zero (since we want the center of mass to lie on the z-axis):
xcm = (m1x1 + m2x2)/(m1 + m2) = 0
Solving for x2, we get:
x2 = -(m1/m2) x1
Substituting the given values, we get:
x2 = -(4.2 kg)/(8.4 kg) * 3.0 m = -1.5 m
Therefore, the 8.4-kg mass should be placed at (-1.5, 0) m to make the moment of inertia about the z-axis zero.
To learn more about moment of inertia, visit: https://brainly.com/question/14460640
#SPJ1
Find the total translational kinetic energy of
3 L of oxygen gas held at a temperature of
3◦C and a pressure of 2 atm.
Answer in units of J.
3 L of oxygen gas kept at 3 °C and 2 atm pressure has a total translation kinetic energy of 10 J.
How do you calculate the total kinetic energy of translation?By adding the two varieties of kinetic energy, it is possible to calculate the object's total kinetic energy. Remember that the product of the object's mass and the square of its linear velocity (around its centre of mass) and splitting the result by two gives the object's translational kinetic energy.
What is the gas molecules' translational kinetic energy at temperature T?Kinetic Translational Energy. No matter their mass, all gas molecules at a particular temperature have the same overall translational speed, according to the calculation.
To know more about kinetic energy visit :
https://brainly.com/question/26472013
#SPJ1
the potential energy of a mass spring system is shown in the figure above. for this mass-spring system, what is the spring constant?
The spring is stiffer and requires more force to stretch or compress, while a lower spring constant means that the spring is more flexible and requires less force.
The potential energy (PE) of a mass-spring system is given by:
PE = (1/2)kx^2
where k is the spring constant and x is the displacement of the mass from its equilibrium position.
To find the spring constant, we can rearrange the equation as follows:
k = (2PE) / x^2
To use this formula, you need to know the potential energy of the system at a specific displacement and the displacement itself. Once you have those values, you can plug them into the formula to find the spring constant.
Note that the spring constant represents the stiffness of the spring and is measured in units of force per unit length (e.g., N/m). It tells us how much force is required to stretch or compress the spring by a certain amount. A higher spring constant means that the spring is stiffer and requires more force to stretch or compress, while a lower spring constant means that the spring is more flexible and requires less force.
To learn more about equilibrium visit:
https://brainly.com/question/30694482
#SPJ11
The fundamental frequency of a person's speech are typically longer when they are angry.
T/F
Answer:
False.
The fundamental frequency of a person's speech, also known as the pitch or F0, can vary depending on various factors such as age, gender, emotion, and cultural background. However, studies have shown that the fundamental frequency tends to increase, rather than decrease, when a person is angry or excited. This increase in pitch during intense emotions is thought to be due to changes in the tension of the vocal cords and increased respiratory activity.
Explanation:
For three situations, here are values for the grindstone's initial angular velocity ω0 and constant angular acceleration α. Will the grindstone come to a momentary stop?
The grindstone will come to a momentary stop in situations 1 and 3, but not in situation 2.
To determine whether the grindstone will come to a momentary stop, we need to find the time t at which its angular velocity reaches zero, using the equation:
ω = ω0 + αt
If there is a real positive solution for t, then the grindstone will come to a momentary stop at that time.
Situation 1:
ω0 = 5 rad/s
α = -2 rad/s^2
ω = ω0 + αt
0 = 5 rad/s - 2 rad/s^2 * t
t = 2.5 s
Since t is a positive real number, the grindstone will come to a momentary stop.
Situation 2:
ω0 = 8 rad/s
α = 0 rad/s^2
ω = ω0 + αt
ω = 8 rad/s
Since α is zero, the angular velocity will remain constant at 8 rad/s and the grindstone will not come to a momentary stop.
Situation 3:
ω0 = -4 rad/s
α = 3 rad/s^2
ω = ω0 + αt
0 = -4 rad/s + 3 rad/s^2 * t
t = 4/3 s
Since t is a positive real number, the grindstone will come to a momentary stop.
Therefore, the grindstone will come to a momentary stop in situations 1 and 3, but not in situation 2.
To learn more about momentary visit:
https://brainly.com/question/30792404
#SPJ11
A 5.0-kg mass sits on the floor of an elevator that has a downward acceleration of 1.0 m/s2. On top of the 5.0-kg mass is an object of unknown mass. The force of the elevator on the 5.0-kg mass is 80 N up. Determine the unknown mass.
1) 3.3 kg
2) 2.4 kg
3) 1.6 kg
4) 4.1 kg
5) 5.0 kg
The unknown mass given the force of the elevator on the 5.0-kg mass is 80 N up is 3.3 kg. The correct option is 1.
To determine the unknown mass, we'll use the following terms: force, mass, acceleration, and Newton's second law (F = m * a).
First, we'll find the net force acting on the 5.0-kg mass:
Net force = Force of elevator - Gravitational force (F = m * g, g = 9.8 m/s²)
Net force = 80 N - (5.0 kg * 9.8 m/s²) = 80 N - 49 N = 31 N
Since the elevator is accelerating downward, the net force should be negative, thus:
Net force = - (5.0 kg * a)
-31 N = - (5.0 kg * 1.0 m/s²)
31 N = 5.0 kg * 1.0 m/s²
Now, let's consider the system of the unknown mass (m) and the 5.0-kg mass. The total force acting on the system is the gravitational force:
Total force = (5.0 kg + m) * 9.8 m/s²
As the net force is 31 N, we can write:
31 N = (5.0 kg + m) * 9.8 m/s²
m = (31 N / 9.8 m/s²) - 5.0 kg ≈ 3.16 kg
The closest answer is 1) 3.3 kg.
For more such questions on Force.
https://brainly.com/question/8125804#
#SPJ11
A 0.25 m radius grinding wheel is rotating with a constant angular speed of 2.0 rad/s. Find the tangential speed at the edge of the wheel.
A 0.25 m radius grinding wheel rotating with a constant angular speed of 2.0 rad/s has a tangential speed at the edge of the wheel of 0.5 m/s.
The tangential speed at the edge of the grinding wheel can be found using the formula:
Tangential speed = radius x angular speed
Plugging in the given values, we get:
Tangential speed = 0.25 m x 2.0 rad/s
Tangential speed = 0.5 m/s
Therefore, the tangential speed at the edge of the wheel is 0.5 m/s.
Alternatively, to find the tangential speed at the edge of the grinding wheel, we'll use the following formula:
Tangential Speed (v) = Radius (r) × Angular Speed (ω)
Given, Radius (r) = 0.25 m and Angular Speed (ω) = 2.0 rad/s.
Now, let's calculate the tangential speed:
v = r × ω
v = 0.25 m × 2.0 rad/s
v = 0.5 m/s
So, the tangential speed at the edge of the wheel is 0.5 m/s.
More on tangential speed: https://brainly.com/question/15002527
#SPJ11
a man of mass 70.0 kg is standing on the rim of a large disk that is rotating at 0.500 rev/s about an axis through its center. the disk has mass 120.0 kg and radius 4.00 m. calculate the total angular momentum of the man-plus-disk system
The sum of the separate components' angular momenta determines the overall angular momentum of the man-plus-disk system, which is
[tex]L_{total}=1520\ kg.m^{2/s}[/tex].
What is momentum?A measure of an object's resistance to changes in motion is called momentum. It is the result of the product of the mass and the velocity of an item, and it is equal to the mass times the velocity. Momentum is commonly denoted by the letter "p" and is a vector quantity, meaning it has both a magnitude and a direction. Because it is a conserved quantity, a system's overall momentum will remain constant both before and after a collision.
The sum of the angular momenta of a system's various components determines its overall angular momentum. The man and the disc are the two halves of this man-plus-disk system.
The man's angular momentum can be calculated as follows:
[tex]L_{man} = I_{man} * \omega[/tex]
where [tex]I_{man}[/tex] is the man's moment of inertia and is the disk's angular velocity.
It is possible to compute the man's moment of inertia as follows:
[tex]I_{man} = m*r^2[/tex]
where r is the disk's radius and m is the man's mass.
As a result, the man's angular momentum is:
[tex]L_{man} = (m * r^2) * \omega\\\\L_{man} = (70.0 kg * (4.00 m)^2) * (0.500 rev/s)\\\\L_{man} = 560 kg. m^{2/s}[/tex]
Calculations for the disk's angular momentum are as follows:
[tex]L_{disk} = I_{disk} * \omega[/tex]
where [tex]I_{disk}[/tex] is the disk's moment of inertia and is the disk's angular velocity.
You can determine the disk's moment of inertia by using the formula:
[tex]I_{disk} = (1/2) * m * r^2[/tex]
where r is the disk's radius and m is the disk's mass.
As a result, the disk's angular momentum is:
[tex]L_{disk} = (1/2) * (m * r^2) * \omega\\\\L_{disk} = (1/2) * (120.0 kg * (4.00 m)^2) * (0.500 rev/s)\\\\L_{disk} = 960 kg m^2/s[/tex]
The sum of the angular momenta of the separate parts of the man-plus-disk system determines the overall angular momentum, which is as follows:
[tex]L_{total} = L_{man} + L_{disk}\\\\L_{total} = 560 kgm^{2/s} + 960 kgm^{2/s}\\\\L_{total} = 1520 kgm^{2/s[/tex]
To learn more about momentum
brainly.com/question/1042017
#SPJ1
Our brain uses the difference between the two sound signals received by our ears to localize sound sources or tell where a sound originated from. What difference do we use to localize LOW frequency sound sources?
Our brain uses the difference in phase between the two sound signals received by our ears to localize low frequency sound sources.
Step-by-step explanation:
1. Low frequency sounds have longer wavelengths and are less directional.
2. Our ears receive these low frequency sound signals.
3. The phase difference between the sound signals is the difference in arrival times at each ear.
4. Our brain processes this phase difference to determine the location of the sound source.
In summary, our brain uses the phase difference between the two sound signals received by our ears to localize low frequency sound sources.
To know more about sound signals and sources - https://brainly.com/question/31577791
#SPJ11
which property is detectable for both dark matter and the supermassive black hole at the center of the milky way?
The property that is detectable for both dark matter and the supermassive black hole at the center of the Milky Way is their gravitational influence on surrounding matter.
Both dark matter and the supermassive black hole affect the motion of nearby stars and galaxies due to their gravitational pull, even though they cannot be directly observed through electromagnetic radiation like visible light.
By studying the movement and behavior of objects in their vicinity, scientists can infer the presence and properties of both dark matter and the supermassive black hole.
Thus, the property is their gravitational influence on surrounding matter.
To know more about supermassive black hole click here:
https://brainly.com/question/16470114
#SPJ11
FILL IN THE BLANK. "Referring to Question 13, after the plates are pulled a small distance apart, the energy stored in thecapacitor ________________________."
Referring to Question 13, after the plates are pulled a small distance apart, the energy stored in the capacitor decreases.
As the distance between the plates of a capacitor increases, the capacitance decreases, and so does the energy stored in the capacitor. This is because the capacitance of a capacitor is directly proportional to the area of the plates and inversely proportional to the distance between them. Therefore, when the distance between the plates is increased, the capacitance decreases, and the energy stored in the capacitor decreases as well. It is important to note that the energy stored in a capacitor is given by the formula E = 1/2 CV^2, where E is the energy stored, C is the capacitance, and V is the potential difference across the plates of the capacitor. As the capacitance decreases, the energy stored in the capacitor also decreases, even if the potential difference across the plates remains the same.
In conclusion, when the plates of a capacitor are pulled a small distance apart, the energy stored in the capacitor decreases due to the decrease in capacitance. This is because the capacitance of a capacitor is directly proportional to the area of the plates and inversely proportional to the distance between them.
Learn more about capacitor here: https://brainly.com/question/17511060
#SPJ11
What happens to a given volume of water when heated from 0°C to 4°C?
A. density increases
B. density decreases
C. density remains constant
D. vaporizes
When water is heated from 0°C to 4°C, its molecules gain energy and begin to move faster. This increased movement causes the water molecules to move slightly farther apart from each other, resulting in a decrease in density.
When water is heated from 0°C to 4°C, its density decreases. This is because water molecules are held together by hydrogen bonds, which become weaker as the temperature increases. As the water molecules move faster and spread out, the density decreases. However, once the temperature reaches 4°C, the density begins to increase again as the water molecules start to form a crystal lattice structure. A substance's density is its weight per unit volume. Water has a density of about 1 gram per milliliter, but this varies depending on temperature or whether substances are dissolved in it. Because ice is less dense than liquid water, the ice cubes in your glass float.
learn more about the density of water
https://brainly.com/question/30783919
#SPJ11
the frictional force of the floor on a large suitcase is least when the suitcase is
The frictional force of the floor on a large suitcase is least when the suitcase is:
Your answer: The frictional force of the floor on a large suitcase is least when the suitcase is rolling on its wheels. his is because static friction, which is the force that keeps the suitcase from moving when it is at rest, is generally greater than kinetic friction, which is the force that opposes the motion of the suitcase when it is moving. Therefore, once the suitcase overcomes the static friction and begins to move, the frictional force of the floor on the suitcase decreases.
1. Understand the different types of friction: static friction, kinetic friction, and rolling friction.
2. Recognize that when a suitcase is rolling, it experiences rolling friction, which is typically less than static and kinetic friction.
3. Identify that when the suitcase is on its wheels, it is rolling and therefore experiencing the least amount of frictional force from the floor.
To know more about static friction and kinetic frcition:
https://brainly.com/question/30886698
#SPJ11
STT 7.2 A ball on the end of a string swings in a horizontal circle once every second. State whether the magnitude of each of the following quantities is zero constant ( not but zero) or changing. A velocityB angular velocityC centripetal accelerationD angular accelerationE tangential acceleration
The speed of the ball is constant, but its direction changes constantly, causing a constant tangential acceleration towards the center of the circle.
A. Velocity: Changing, as the direction of velocity is constantly changing as the ball moves in a circle.
B. Angular velocity: Constant, as the ball takes the same time to complete each rotation.
C. Centripetal acceleration: Constant, as the speed of the ball is constant, but the direction of motion changes, which causes the direction of acceleration to change.
D. Angular acceleration: Zero, as the angular velocity is constant and there is no change in its magnitude or direction.
E. Tangential acceleration: Constant, as the speed of the ball is constant, but its direction changes constantly, causing a constant tangential acceleration towards the center of the circle.
To learn more about Constant visit:
https://brainly.com/question/1597456
#SPJ11
Suppose we drill a hole through the Earth along its diameter and drop a small mass m down the hole. Assume that the Earth is not rotating and has a uniform density throughout its volume. The Earth’s mass is ME and its radius is RE. Let r be the distance from the falling object to the center of the Earth.
a. Derive an expression for the gravitational force on the small mass as a function of r when it is moving inside the Earth.
b. Derive an expression for the gravitational force on the small mass as a function of r when it is outside the Earth.
d. Determine the work done by the gravity as the mass moves from the surface to the center.
e. Determine the speed of the mass at the center of the Earth if the Earth has a given density p
f. Determine the time it takes the mass to move from the surface to the center.
For the time it takes for the mass to move from the surface to the center, we get:
t = √(2
What is Work Done?
In physics, work is defined as the amount of energy transferred when a force is applied over a certain distance. Work done is the measure of the energy transferred when a force is exerted on an object and that object moves a certain distance as a result of that force.
At the center of the Earth, the gravitational force on the mass becomes zero because the mass is equally attracted in all directions. Therefore, at the center of the Earth, the kinetic energy of the mass is equal to the potential energy gained as it moves from the surface to the center. This can be expressed as:
(1/2) * m * [tex]v^{2}[/tex]= 2/3 * G * π * p * m * R[tex]E^{2}[/tex]
Solving for v, we get:
v = sqrt(8/9 * G * π * p * R[tex]E^{2}[/tex])
f. To determine the time it takes the mass to move from the surface to the center, we need to use the work-energy principle:
W = ΔK
where W is the work done by gravity, ΔK is the change in kinetic energy of the mass, and K is the kinetic energy.
The work done by gravity is given by the expression derived in part (d):
W = 2/3 * G * π * p * m * R[tex]E^{2}[/tex]
The change in kinetic energy is given by:
ΔK = (1/2) * m * [tex]v^{2}[/tex] - (1/2) * m
= (1/2) * m *[tex]v^{2}[/tex]
Substituting the expressions for W and ΔK, we get:
2/3 * G * π * p * m * R[tex]E^{2}[/tex] = (1/2) * m * [tex]v^{2}[/tex]
Solving for the time it takes for the mass to move from the surface to the center, we get:
t = √(2
Learn more about Work Done
https://brainly.com/question/25573309
#SPJ1
9.0 g of water in a 2.0-L pressure vessel is heated to 500°C. What is the pressure inside the container? (R = 0.082 L×atm/mol×K, one mole of water has a mass of 18 grams)
To solve this problem, we can use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to determine the number of moles of water in the container. The mass of 9.0 g of water is:
9.0 g / 18 g/mol = 0.5 mol
The volume of the container is 2.0 L. We can assume that water behaves as an ideal gas at high temperatures and low pressures, so we can use the ideal gas law to solve for the pressure:
P = nRT/V
Substituting the values we have:
P = (0.5 mol) x (0.082 L-atm/mol-K) x (500 + 273 K) / 2.0 L
Simplifying:
P = 23.4 atm
Therefore, the pressure inside the container is 23.4 atm.
To know more about ideal gas law :
https://brainly.com/question/4147359
#SPJ11
Take the location of particle 5 as the reference point for all angular momentum calculations when answering the following questions. Be sure to express your answer as a vector.
Consider all six particles as a system. What is the rotational momentum of the system? a. < 0 b. 0 c. -2*m*v*d > 0 0 -2 · m · vid
-2*m*v*d is the rotational momentum of the system.
Hence, the correct option is C.
We are taking the location of particle 5 as the reference point for all angular momentum calculations, the angular momentum of the system can be found by calculating the angular momentum of each particle about particle 5 and adding them.
Let the mass of each particle is "m", and their velocities are v1, v2, v3, v4, v5, and v6, respectively, and their positions relative to particle 5 are d1, d2, d3, d4, d5, and d6, respectively, the angular momentum of each particle about particle 5 can be calculated as
Where
L1 = m * (r1 x v1), where r1 = d1 - d5
L2 = m * (r2 x v2), where r2 = d2 - d5
L3 = m * (r3 x v3), where r3 = d3 - d5
L4 = m * (r4 x v4), where r4 = d4 - d5
L5 = 0, where r5 = d5-d5 = 0, since the reference point is particle 5
L6 = m * (r6 x v6), where r6 = d6 - d5
The total angular moment of the system is defined by the vector sum of these
L = L1 + L2 + L3 + L4 + L5 + L6
We didn't know the values of the velocities and position of the particle so, we can't determine the value of L. However, we can eliminate the option A and B.
Hence, the angular momentum of the system can't not be negative or zero as defined in specific direction.
Hence, the correct option is C.
To know more about rotational momentum here
https://brainly.com/question/29803113
#SPJ4
Consider two current carrying circular loops. Both are made from the same wire and both carry the same current, but one has twice the radius of the other. If the magnetic field strength at the center of the smaller loop is B, what is the magnetic field strength at the center of the larger loop? A) 8B 4B C) 2B D) B/2 E) B/4
Your Answer :- The magnetic field strength at the center of the larger loop is B/2, which corresponds to answer choice D.
The magnetic field strength (B) at the center of a current-carrying circular loop can be calculated using the formula:
B = μ₀ * I / (2 * π * R)
Where:
- μ₀ is the permeability of free space (4π × 10^(-7) Tm/A),
- I is the current,
- R is the radius of the loop.
Given that both loops are made from the same wire and carry the same current, the magnetic field strength at the center of the smaller loop is B. The radius of the larger loop is twice that of the smaller loop (2R).
To find the magnetic field strength at the center of the larger loop, we can use the same formula:
B_larger_loop = μ₀ * I / (2 * π * (2R))
Simplify the equation:
B_larger_loop = (μ₀ * I) / (4 * π * R)
Since B = μ₀ * I / (2 * π * R), we can rewrite the equation as:
B_larger_loop = (1/2) * B
So, the magnetic field strength at the center of the larger loop is B/2, which corresponds to answer choice D.
learn more about "magnetic field strength":-https://brainly.com/question/26257705
#SPJ11
Whats the energy of a 0. 051 kg tennis ball moving at 9. ,7 m/s
The kinetic energy of a 0.051 kg tennis ball moving at 9.7 m/s is approximately 2.409395 Joules.
The kinetic energy formula, which is provided by: can be used to determine the energy of a moving object,
Kinetic energy (KE) = 1/2× mass ×velocity²
where mass represents the object's weight in kilogrammes (kg) and velocity its speed in metres per second (m/s).
The tennis ball has a mass of 0.051 kg and a speed of 9.7 m/s, thus we can enter these numbers into the formula to determine its kinetic energy:
KE = 1/2 × 0.051 kg × (9.7 m/s)²
KE = 0.5 × 0.051 kg × 94.09 m²/s²
KE = 2.409395 J
So, the kinetic energy of a 0.051 kg tennis ball moving at 9.7 m/s would be approximately 2.409395 Joules.
To know more about tennis ball
https://brainly.com/question/15232620
#SPJ4
10.28 A wrecking ball is suspended from a 5.0 m long cable that makes a 30 degree angle with the vertical. The ball is released and swings down. What is the ball's speed at the lowest point?A 7.7 m/s B 4.4 m/sC 3.6 m/sD 3.1 m/s
To find the wrecking ball's speed at the lowest point which is suspended from a 5.0 m long cable that makes a 30 degree angle with the vertical. The ball is released and swings down.
To solve this problem, we can use conservation of energy. At the highest point, all of the ball's energy is potential energy (PE=mgh), where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the ball above its lowest point. At the lowest point, all of the ball's energy is kinetic energy (KE=1/2mv^2), where v is the speed of the ball.
Since energy is conserved, we can set the initial potential energy equal to the final kinetic energy:
mgh = 1/2mv^2
We can cancel out the mass m from both sides, and solve for v:
v = sqrt(2gh)
To find h, we need to use trigonometry to find the height of the lowest point above the ground. The horizontal distance from the point where the ball is released to the point where it reaches its lowest point is given by:
5.0 m * sin(30 degrees) = 2.5 m
The vertical distance from the release point to the lowest point is given by:
5.0 m * cos(30 degrees) = 4.3 m
Therefore, the total height of the lowest point above the ground is:
h = 4.3 m - 0.5 m = 3.8 m
(where we subtract 0.5 m because the ball has a radius of 0.5 m)
Now we can plug in the values for g and h and solve for v:
v = sqrt(2 * 9.81 m/s^2 * 3.8 m) = 3.1 m/s
Therefore, the answer is D) 3.1 m/s.
What is the most likely cause of ring down artifact ?
a. refraction
b. inversion
c. reabsorption
d. reflection
The most likely cause of ring down artifact is d. reflection. This type of artifact occurs when a series of reflections happen between two closely spaced parallel surfaces.
When a person conducts a thorough scientific study of human history or produces data as a result of such study, that individual is referred to as an archaeologist. Archaeology is the field of study that an archaeologist pursues.
In archaeology, the fossils that the archaeologist finds while excavating a site are used to aid in the study. They may uncover the remains of ancient humans or any other living species while excavating the site, including jewellery, utensils, bones, and a variety of other items reflections. The methods employed by archaeologists to conduct research are referred to as radiocarbon dating, often known as carbon dating. Creating an image with multiple parallel lines extending downward from the actual structure.
Learn more about Archaeology here
https://brainly.com/question/17362933
#SPJ11
if you are in a car that is being pulled down a 56.0m path with a force of 12.5n what is the work done on the car
Answer: work done is: 700 J.
the formula of work done is : work=force × distance
here, the distance car being pulled is 56.0 m and the force applied on it is 12.5 n. so the work done to pulled a car id : = 12.5 × 56.0
=700.0 j.
