Suppose x is a uniform random variable with c=10 and d=70. Find the probability that a randomly selected observation is between 13 and 65. a) 0.133 b) 0.867 c) 0.8 d) 0.5

The y-intercept indicates that the expected diastolic pressure when the systolic pressure is zero is 60.9455 mmHg.

Diastolic pressure is the pressure in the arteries when the heart is resting, between beats. It is one of the two readings that make up the blood pressure measurement. The other reading is systolic pressure, which is the pressure in the arteries when the heart contracts to pump out the blood. The systolic pressure reading is typically higher than the diastolic pressure reading.

The least-squares regression line for predicting the diastolic pressure from the systolic pressure is y = 0.6391x + 60.9455.This equation indicates that for every increase of one unit in the systolic pressure, the diastolic pressure is expected to increase by 0.6391 units. The y-intercept indicates that the expected diastolic pressure when the systolic pressure is zero is 60.9455 mmHg.

To learn more about diastolic pressure

https://brainly.com/question/20347000

#SPJ1

Complete question:

Blood pressure: A blood pressure measurement consists of two numbers: the systolic pressure, which is the maximum pressure taken when the heart is contracting, and the diastolic pressure, which is the minimum pressure taken at the beginning of the heartbeat. Blood pressures were measured, in millimeters of mercury (mmHg), for a sample of 10 adults. The following table presents the results. Systolic 130 116 133 112 107 Diastolic 76 70 91 75 71 Systolic Diastolic 115 113 123 119 118 83 69 Based on results published in the Journal of Human Hypertension Download data Part 1 out of 4 Compute the least-squares regression line for predicting the diastolic pressure from the systolic pressure. Round the slope andy-intercept values to four decimal places. Regression line equation: y-

Answer:

1561.813ft32ft²

Step-by-step explanation:

To calculate the area of the wall which we will call the largest rectangle we must calculate the area of all rectangles on the wall and subtract their combined area from the total.

A = l*w

large rectangle 52.5ft * 33ft = 1732.5 ft²

rectangle A 6.25ft * 5.75ft = 35.9375ft²

rectangle B 3.125ft * 4ft = 12.5ft²

square C (9.5ft)² = 90.25ft²

rectangle D 4ft * 8ft = 32ft²

the total area of the wall needed to be painted

1732.5 ft² - 35.9375ft² - 12.5ft² - 90.25ft² - 32ft² = 1561.813ft32ft²

We can be 95% confident that the true mean gas mileage for cars in the large community is at least 24.764 mpg.

To estimate the lower bound of the true mean gas mileage with a 95% confidence level, we can use the one-sample t-test with the formula

Lower bound = x - (tα/2 * (s/√n))

Where

x = sample mean = 25.25

tα/2 = t-value for the 95% confidence level with (n-1) degrees of freedom = 1.998 (from t-table or calculator)

s = population standard deviation = 4.99

n = sample size = 65

Substituting the values, we get

Lower bound = 25.25 - (1.998 * (4.99/√65)) ≈ 24.764

Therefore, we can estimate with 95% confidence that the true mean gas mileage is at least 24.764 mpg.

To know more about confidence interval:

https://brainly.com/question/29680703

#SPJ4

--The given question is incomplete, the complete question is given

" Since 1975 the average fuel efficiency of U.S. cars and light trucks (SUVs) has increased from 13.5 to 25.8 mpg, an increase of over 90%. A random sample of 65 cars from a large community got a mean mileage of 25.25 mpg per vehicle. The population standard deviation is 4.99 mpg. Estimate the lower bound true mean gas mileage with 95% confidence.

Round your answer to 3 decimal places."--

Sequence  Explicit Formula  Exponential Function  Constant Ratio y-Intercept

A                  -2*3^x-1                f(x) = (-2)3^(x-1)              3                   (0, -2)

B                  45*2^x-1               f(x) = (45)2^(x-1)             2                   (0, 45)

C                 1234*0.1^x-1       f(x) = (1234)0.1^(x-1)          0.1               (0, 1234)

D               -5*(1/2)^x-1             f(x) = -5*(1/2)^(x-1)           1/2              (0, -5)

The constant ratio should be gotten from the base of the exponent. For example in sequence A, The exponent is ^(x-1) and the base 3. Three is therefore the constant.  

8 Rewrite each explicit formula of the geometric sequences that are exponential functions in function form. Identify the constant ratio and the y-intercept.

Sequence   Explicit Formula   Exponential Function  Constant Ratio y-Intercept

A                      -2*3^x-1

B                      45*2^x-1

C                       1234*0.1^x-1

D                      -5*(1/2)^x-1

Find more exercises on constant ratio;

https://brainly.com/question/11572542

#SPJ1

MANY SOLUTIONS

If you eliminate the x's you have 4 left so both 4 are equal to each other and so it is many solutions because if you have two variable or numbers equal to each other it is many solutions

-x+4=-x+4

+x. +x

4=4

Answer:

The area under the normal distribution curve is always positive, even if the corresponding z-value is negative. A negative z-value indicates that the value is below the mean, but since the area under the curve represents probability, it is always positive regardless of the sign of the z-value. Furthermore, since the curve is always above the x-axis, the area is also always positive.

TRUE

Events A and B are not independent as the probability of both events occurring together is not equal to the product of their individual probabilities.

Events A and B are considered independent if the occurrence of one event does not affect the probability of the other event occurring. In this case, the probability of event A occurring is 0.5, the probability of event B occurring is 0.7, and the probability of both events A and B occurring is 0.34. Since the probability of both events A and B occurring (0.34) is not equal to the product of the probabilities of each event occurring independently (0.5 * 0.7 = 0.35), Events A and B are not independent.

Therefore, Events A and B are not independent as the probability of both events occurring together is not equal to the product of their individual probabilities.

To learn more about probability here:

brainly.com/question/30034780#

#SPJ11

Without the individual probability of a passenger showing up, we cannot calculate the exact probability of the number of people who show up exceeding the capacity of the plane

To solve this problem, we need to determine the probability that more than 65 people (the capacity of the plane) will show up from the 70 booked passengers.

Step 1: Identify the relevant information
- Maximum capacity of the plane: 65
- Number of people booked: 70

Step 2: Calculate the probability of each possible outcome
To exceed the capacity, at least 66 passengers must show up. We need to calculate the probability of 66, 67, 68, 69, and 70 passengers showing up. However, we don't have information on the individual probability of a passenger showing up. If we had this information, we could use the binomial probability formula.

Step 3: Express the final answer
Unfortunately, without the individual probability of a passenger showing up, we cannot calculate the exact probability of the number of people who show up exceeding the capacity of the plane. Please provide the probability of a passenger showing up so we can give you an accurate answer.

Learn more about probability here:

https://brainly.com/question/27992840

#SPJ11

confidence interval: This tells us the degree of certainty or uncertainty that is existent in a sampling method.

To construct a 95% confidence interval for the population mean cholesterol level, we can use the following formula:

CI = x ± t*(s/√n)

where x is the sample mean, s is the sample standard deviation, n is the sample size, and t is the t-value from the t-distribution with n-1 degrees of freedom and a confidence level of 95%.

Substituting the given values, we have:

CI = 224 ± t*(12/√21)

Using a t-table with 20 degrees of freedom (since n-1=20), we find that the t-value for a 95% confidence interval is approximately 2.086.

Thus, the confidence interval is:

CI = 224 ± 2.086*(12/√21)

CI = (219.60, 228.40)

Therefore, the answer is option (c) (219.60, 228.40).

learn about confidence interval,

https://brainly.com/question/20309162

#SPJ11

The test statistic value is approximately 2.47.

To test the airline's claim, we will use the one-sample z-test for proportions. Here are the given values:
Hypothesized proportion (p0): 0.03 (since the claim is that the no-show rate is less than 3%)
Sample size (n): 420
Number of no-shows (x): 21
Significance level (α): 0.01


Next, compute the standard error (SE) using the hypothesized proportion (p0) and sample size (n):
SE = √[(p0 × (1 - p0))/n] = √[(0.03 × 0.97)/420] ≈ 0.0081

Now, calculate the test statistic (z) using the sample proportion, hypothesized proportion (p0), and standard error (SE):
(0.05 - 0.03) / 0.0081 ≈ 2.47

The test statistic value is approximately 2.47.

To learn more about test statistic here:

brainly.com/question/30216367#

#SPJ11

The frequency distribution table is shown in image. The frequency distribution of the daily rainfall data is highly skewed to right side, indicating that it does not follow a normal distribution.

Using a lower class limit of 0.00 and a class width of 0.20, the frequency distribution for the given data would be as

To determine if the frequency distribution appears to be roughly normal, we can create a histogram of the data

From the histogram, it is clear that the frequency distribution is not roughly normal. The distribution is highly skewed to right side, with the majority of the rainfall data falling in the lower range of the data set.

The mean of the data set is also much lower than the median, which further supports the conclusion that the data is highly skewed. Therefore, we can conclude that the rainfall data does not follow a normal distribution.

To know more about frequency distribution:

https://brainly.com/question/28406412

#SPJ4

--The given question is incomplete, the complete question is given

" The data represents the daily rainfall​ (in inches) for one month. Construct a frequency distribution beginning with a lower class limit of 0.00 and use a class width of 0.20. Does the frequency distribution appear to be roughly a normal​distribution?

data

0.38

0

0.22

0.06

0

0

0.21

0

0.53

0.18

0

0

0.02

0

0

0.24

0

0

0.01

0

0

1.28

0.24

0

0.19

0.53

0

0

0.24

0"--

Therefore, the weighted mean of Elaine's grades is 78.9. Option 3.

To find the weighted mean of Elaine's quiz and final exam grades, you should consider that the quizzes each count for 15% and the final exam counts for 55% of the final grade. Elaine's quiz grades are 67, 64, and 87, and her final exam grade is 84.

To calculate the weighted mean, first find the average of the quiz grades:

(67 + 64 + 87) / 3 = 72.67.

Then, multiply this by 45% (the combined weight of the three quizzes):

72.67 ×0.45 = 32.70.

Next, multiply the final exam grade by its weight (55%): 84 × 0.55 = 46.20. Finally, add these two weighted values together:

32.70 + 46.20 = 78.90.
The weighted mean of Elaine's grades is approximately 78.9, which corresponds to option 3 in your list.

To learn more mean, click here:

https://brainly.com/question/19923556

#SPJ11

Answer:

$11.90

Step-by-step explanation:

11 and 9/10 converted to dollars and cents is 11.90

11 is 11 wholes, therefore it stays the same.

1/10 is equal to .10, so 9/10 is equal to .90.

SORRY IF THIS DOESN'T MAKE SENSE!

The critical point is x=4 and y=-1;

To find the critical points of f(x, y) = x² + xy + 2y² - 7x, you need to find the partial derivatives with respect to x and y and set them equal to 0.

Partial derivative with respect to x: fx(x, y) = 2x + y - 7
Partial derivative with respect to y: fy(x, y) = x + 4y

Setting both equal to 0:

2x + y - 7 = 0
x + 4y = 0

Solving this system of equations, we get x = 4 and y = -1. So, the critical point is (4, -1).

In summary, the critical point of f(x, y) = x² + xy + 2y² - 7x is (4, -1) with x = 4 and y = -1. To find this, calculate partial derivatives with respect to x and y, set them equal to 0, and solve the system of equations.

To know more about critical point click on below link:

https://brainly.com/question/29144288#

#SPJ11

Answer:

Step-by-step explanation:

They are triangles and each are congruent:

CA≅DO

AT≅OG

TC≅GD

The solution using tangent lines, and not the actual solution curve.

True.

Euler's method is a numerical method for approximating solutions to ordinary differential equations (ODEs). The method works by taking small steps along tangent lines to the solution curve at each point, instead of finding the actual solution curve. This means that the approximation produced by Euler's method is only an estimate and may not be exact.

In particular, the error in Euler's method depends on the step size used and on the second derivative of the solution curve. As the step size decreases, the error decreases, but there is still a possibility that the approximation will deviate significantly from the actual solution curve.

Therefore, it is true that Euler's method never yields the precise value of y(t, end) because we are only approximating the solution using tangent lines, and not the actual solution curve.

To learn more about approximation visit:

https://brainly.com/question/11542606

#SPJ11

Based on the given data, we cannot conclude that there is a significant difference in the size of apples and oranges.

To compare the size of apples and oranges, we can conduct a two-sample t-test. The null hypothesis is that the mean diameter of apples is equal to the mean diameter of oranges. The alternative hypothesis is that the mean diameter of apples is different from the mean diameter of oranges.
Using the given data, we can calculate the t-statistic as follows:
t = [tex](3.117 - 3.25) / \sqrt{((0.34^2 / 29) + (0.481^2 / 19))}[/tex] = -1.31
The degrees of freedom for the t-test is (29-1) + (19-1) = 46.
Using a significance level of 0.05 and a two-tailed test, the critical value for the t-distribution with 46 degrees of freedom is approximately ±2.013.
Since the calculated t-statistic (-1.31) is less than the critical value (-2.013), we fail to reject the null hypothesis. This means that there is not enough evidence to suggest that apples and oranges are not the same sizes.

Learn more about hypothesis here:

https://brainly.com/question/31319397

#SPJ11

The value of x is given as follows:

x = 2.

We are given two segments on the circle, and their lengths are given as follows:

The two segments represent chords on the circle, which are line segments connecting two points on the circumference of the circle.

As the two points are chords, they have the same length, and thus the value of x is obtained as follows:

8x - 3 = 2x + 9

6x = 12

x = 2.

More can be learned about chords in a circle at https://brainly.com/question/13950364

#SPJ1

The statement is false given in the question pointing to the ratio of a pair of corresponding sides is 9/16, under the condition that two similar hexagons have areas 36 sq. inches and 64 sq.inches

Now the ratio of the areas of two given similar polygons is equal to the square of the ratio of their corresponding sides .

Then, if two similar hexagons have areas of 36 square inches and 64 square inches,

Therefore, the ratio of their corresponding sides is

√(64/36) = 4/3

But, the problem gives the ratio of a pair of corresponding sides is 9/16 .

Then,

9/16 ≠ 4/3,

The statement is false given in the question pointing to the ratio of a pair of corresponding sides is 9/16.

To learn more about hexagon,

https://brainly.com/question/30384520

#SPJ4

Nicole would have $73,036.70 - $56,772.25 = $16,264.45 more money than Bentley after 14 years at the given interest rate.

Simple interest refers to an interest rate where the interest is just calculated on the principal sum of money. For the duration of the loan or investment, the interest rate is only applied once to the principal sum. On the other hand, compound interest is a type of interest where the interest is computed using both the principal and the interest from prior periods. After each compounding period, the interest rate is applied to the newly created balance.

The compound interest is given as:

[tex]A = P * e^{(rt)}[/tex]

Substituting the given values:

[tex]A = 29000 * e^{(0.0541 * 14)} = $73,036.70[/tex]

Now, after 14 years:

[tex]A = P * (1 + r/100)^t[/tex]

Substituting the values:

[tex]A = 29000 * (1 + 0.04885)^{14} = $56,772.25[/tex]

Hence, Nicole would have $73,036.70 - $56,772.25 = $16,264.45 more money than Bentley after 14 years

Learn more about simple interest here:

https://brainly.com/question/30824126

#SPJ1

The equation is [y = (11/5)x - 3] for the line touches (0, -3) and (5, 8).

In a graph, a line is a straight curve that connects two or more points. It is used to represent relationships between two variables, such as x and y.

To write an equation for the line passing through the points (0,-3) and (5,8), we can use the point-slope form of the equation of a line, which is:

y - y₁ = m(x - x₁)

where m is the slope of the line, and (x₁, y₁) is one of the given points on the line. The slope:

m = (y₂ - y₁) / (x₂ - x₁)

where (x₁, y₁) and (x₂, y₂) are the two given points on the line.

Using the points (0, -3) and (5, 8), we can find the slope:

m = (8 - (-3)) / (5 - 0) = 11/5

Now we can use the point-slope form of the equation of the line, with (0,-3) as the given point:

y - (-3) = (11/5) (x - 0)

Simplifying this equation, we get:

y + 3 = (11/5) x

Subtracting 3 from both sides, we get the final equation for the line:

y = (11/5)x - 3

To know more about line segment, visit:
https://brainly.com/question/280216
#SPJ1

The curve that passes through the point (4, 8) and whose slope at each point is 6√x is calculated out to be  y = 2x√x - 8.

To find the curve that satisfies these conditions, we can integrate the slope function with respect to x to obtain the expression for y.

dy/dx = 6√x

Integrating both sides with respect to x gives:

y = ∫ 6√x dx = 2x√x + C

where C is an arbitrary constant of integration. To find the value of C, we can use the fact that the curve passes through the point (4, 8):

8 = 2(4)√4 + C

Simplifying this equation gives:

8 = 16 + C

C = -8

Therefore, the equation of the curve is:

y = 2x√x - 8

So the curve that passes through the point (4, 8) and whose slope at each point is 6√x is y = 2x√x - 8.

Learn more about slope :

https://brainly.com/question/26650191

#SPJ4

The values x = 2 and y = 3 minimize the labor cost, and the minimum labor cost is $106.

To minimize the labor cost, L(x, y), we need to find the values of x and y that result in the lowest cost. We can achieve this by finding the partial derivatives of L(x, y) with respect to x and y, and then setting them equal to zero to find the critical points.

L(x, y) = (3/2)x² + y² - 6x - 6y - 2xy + 133

Partial derivative with respect to x:
∂L/∂x = 3x - 6 - 2y

Partial derivative with respect to y:
∂L/∂y = 2y - 6 - 2x

Now, set both partial derivatives equal to zero and solve for x and y:

3x - 6 - 2y = 0
2y - 6 - 2x = 0

Solving these equations simultaneously, we find that x = 2 and y = 3.

Now, substitute the values of x and y back into the labor cost equation to find the minimum labor cost:

L(2, 3) = (3/2)(2)² + (3)² - 6(2) - 6(3) - 2(2)(3) + 133
L(2, 3) = 6 + 9 - 12 - 18 - 12 + 133
L(2, 3) = 106

So, the values x = 2 and y = 3 minimize the labor cost, and the minimum labor cost is $106.

To learn more about labor cost, refer below:

https://brainly.com/question/30011394

#SPJ11

Answer: [tex]i_v(α) ∧ β - α ∧ i_v(β) = (-23 dx ∧ dy - 161 dz ∧ dx + 69 dy ∧ dz) - (15 dy ∧ dx + 6 dz ∧ dx - 10 dy ∧ dz)= -23 dx ∧ dy - 171 dz ∧ dx + 79 dy ∧ dz[/tex]

Step-by-step explanation:

To solve this problem, we need to use the exterior product (∧), the interior product (i_v), and the derivative operator (∂).

First, let's find i_vα:

[tex]i_vα = (2 dx + 3 dy - 5 dz) ⋅ (3∂x - 2∂y - 4∂z)[/tex]

= 6 - 9 - 20

= -23

Next, let's find i_vβ:

[tex]i_vβ = (dx ∧ dy + 7 dz ∧ dx - 3 dy ∧ dz) ⋅ (3∂x - 2∂y - 4∂z)= (dx ∧ dy) ⋅ (3∂x - 2∂y - 4∂z) + (7 dz ∧ dx) ⋅ (3∂x - 2∂y - 4∂z) - (3 dy ∧ dz) ⋅ (3∂x - 2∂y - 4∂z)= -12∂z[/tex]

Now, let's find α ∧ β:

α ∧ β = (2 dx + 3 dy - 5 dz) ∧ (dx ∧ dy + 7 dz ∧ dx - 3 dy ∧ dz)

= 2 dx ∧ dx ∧ dy + 7 dz ∧ dx ∧ dx - 3 dy ∧ dz ∧ dx

+ 3 dy ∧ dx ∧ dy + 7 dz ∧ dx ∧ dy - 5 dz ∧ dy ∧ dz

= -3 dx ∧ dy ∧ dz + 3 dy ∧ dz ∧ dx + 7 dz ∧ dx ∧ dy - 7 dz ∧ dx ∧ dy - 5 dz ∧ dy ∧ dz

= -3 dx ∧ dy ∧ dz + 3 dy ∧ dz ∧ dx - 5 dz ∧ dy ∧ dz

Now, let's find i_v(α ∧ β):

i_v(α ∧ β) = -23∂z ∧ (-3 dx ∧ dy ∧ dz + 3 dy ∧ dz ∧ dx - 5 dz ∧ dy ∧ dz)

= 69 dx ∧ dy - 69 dy ∧ dz + 115 dz ∧ dy

Finally, let's verify that i_v(α ∧ β) = i_v(α) ∧ β - α ∧ i_v(β):

[tex]i_v(α) = (2 dx + 3 dy - 5 dz) ⋅ (3∂x - 2∂y - 4∂z)= 6 - 9 - 20= -23i_v(β) = (dx ∧ dy + 7 dz ∧ dx - 3 dy ∧ dz) ⋅ (-2∂y)= -3 dx ∧ dzi_v(α) ∧ β = (-23) ∧ (dx ∧ dy + 7 dz ∧ dx - 3 dy ∧ dz)= -23 dx ∧ dy - 161 dz ∧ dx + 69 dy ∧ dzα ∧ i_v(β) = (2 dx + 3 dy - 5 dz) ∧ (-3 dx ∧ dz)= 15 dy ∧ dx + 6 dz ∧ dx - 10 dy ∧ dz[/tex]

Therefore, [tex]i_v(α) ∧ β - α ∧ i_v(β) = (-23 dx ∧ dy - 161 dz ∧ dx + 69 dy ∧ dz) - (15 dy ∧ dx + 6 dz ∧ dx - 10 dy ∧ dz)= -23 dx ∧ dy - 171 dz ∧ dx + 79 dy ∧ dz[/tex]

The terminal side of a 540 degree angle in standard position will lie on the negative x-axis.

Standard Position: If an angle's vertex is at its origin and one of its rays is on the positive x-axis, it is in the standard position. The initial side and the terminal side are the names given to the rays along the x-axis.

In standard position, a 900-degree angle will have its initial side along the positive x-axis and its terminal side rotating by 900 degrees counterclockwise.

Since each full counterclockwise revolution compares to a point of 360 degrees, we can take away 360 degrees from 900 degrees to track down the same point inside one full turn:

900 degrees - 360 degrees = 540 degrees

Thus, a 900 degree angle in standard position is equivalent to a 540 degree angle in standard position.

know more about angle visit :

https://brainly.com/question/28451077

#SPJ1

The given expression can be written as a Riemann sum with Δx = 1/n and xi = i/n, where i = 1, 2, ..., n. Thus, we have:
lim n→∞ ∑i=1n (2+i/n)² (1/n) = lim n→∞ ∑i=1n [(2/n)² + 4i/n³ + (i/n)²] = lim n→∞ [(2/n)² ∑i=1n 1 + 4/n³ ∑i=1n i + (1/n²) ∑i=1n i²]

Using the formulas for the sum of the first n natural numbers and the sum of the squares of the first n natural numbers, we can simplify this expression to:
lim n→∞ [(2/n)²n + 4/n³(n(n+1)/2) + (1/n²)(n(n+1)(2n+1)/6)]
Taking the limit as n approaches infinity, we see that the first term goes to 0, the second term goes to 0, and the third term goes to 1/3. Therefore, we have:
lim n→∞ ∑i=1n (2+i/n)² (1/n) = 1/3
Thus, the definite integral that is equal to this limit is:
∫₀¹ (2+x)² dx = [x³/3 + 4x²/2 + 4x]₀¹ = (1/3) + 4 + 8 = 28/3
Therefore, the definite integral that is equal to the given limit is 28/3.

Learn more about Riemann sum here:

https://brainly.com/question/30404402

#SPJ11

The derivative formula for the function is f'(x) = 5(5x + 23)^4(5)(15x + 4) + (5x + 23)^5(15).

To find the derivative of the function f(x) = (5x + 23)^5(15x + 4), we will use the product rule. The product rule states that the derivative of two functions multiplied together is the derivative of the first function times the second function plus the first function times the derivative of the second function.

Let u(x) = (5x + 23)^5 and v(x) = (15x + 4).

To find u'(x), we use the chain rule: u'(x) = 5(5x + 23)^4(5), where 5 is the derivative of the inner function 5x + 23.

To find v'(x), we take the derivative of 15x + 4, which is 15.

Now apply the product rule:

f'(x) = u'(x)v(x) + u(x)v'(x) = 5(5x + 23)^4(5)(15x + 4) + (5x + 23)^5(15).

So, the derivative formula for the given function is:

f'(x) = 5(5x + 23)^4(5)(15x + 4) + (5x + 23)^5(15)

Learn more about  derivatives : https://brainly.com/question/28376218

#SPJ11

As we have shown that the expected value of ô2 is equal to σ², which means that ô2 is an unbiased estimator for σ².

Assuming that we have a random sample of size n drawn from a normal population with a mean of µ and a variance of σ², we can estimate the population variance using the given formula σ² = 1/2k Σi=1 k (Y2i-Y2i-1)², where n = 2k.

Now, the question asks us to show that this estimator, denoted by ô2, is an unbiased estimator for σ².

To show that ô2 is an unbiased estimator, we need to calculate its expected value and show that it is equal to σ². The expected value of ô2 can be calculated as follows:

E(ô2) = E(1/2k Σi=1 k (Y2i-Y2i-1)²) = 1/2k Σi=1 k E((Y2i-Y2i-1)²)

Now, since Y1, Y2, ..., Yn are drawn from a normal population with mean µ and variance σ², we know that the difference Y2i-Y2i-1 follows a normal distribution with mean 0 and variance 2σ². Therefore, the expected value of (Y2i-Y2i-1)² is given by:

E((Y2i-Y2i-1)²) = Var(Y2i-Y2i-1) + [E(Y2i-Y2i-1)]² = 2σ² + 0² = 2σ²

Substituting this into the expression for E(ô2), we get:

E(ô2) = 1/2k Σi=1 k E((Y2i-Y2i-1)²) = 1/2k Σi=1 k 2σ² = σ²

To know more about variance here

https://brainly.com/question/14116780

#SPJ4

The height of the cylinder is 3.38 inches.

The formula we used is pi*r^2*h. In this case, the height is asked so the formula becomes h=V/pi*r^2. we know volume= 1000 cubic inches and radius= 9.5 inches.So

            h= 1000/3.14*9.5^2

            h= 3.38 inches

The IQR is calculated as the difference between the 75th and 25th percentiles of a dataset. It is not found by subtracting the mean from the maximum value of the dataset.

Data is the collection of data term that is organized and formatted in a specific way it typically contains fact observations or statistics that are collected through a process of measurement or research data set can be used to answer the question and help make an informed decision they can be used in a variety of ways such as to identify trends on cover patterns and make a prediction.

The interquartile range (IQR) is a statistical measure used to describe the spread or dispersion of a dataset. It is calculated as the difference between the 75th percentile (Q3) and the 25th percentile (Q1) of the dataset. In other words, the IQR represents the range of the middle 50% of the data.

To calculate the IQR, you first need to determine the median of the dataset. The median is the middle value of the dataset when it is arranged in order from smallest to largest. Then, you divide the dataset into two halves based on this median value: the lower half (values smaller than the median) and the upper half (values larger than the median).

Next, you determine the median of each of these halves separately. The median of the lower half is the first quartile (Q1), and the median of the upper half is the third quartile (Q3).

Finally, the IQR is calculated as the difference between Q3 and Q1 (IQR = Q3 - Q1).

So, to sum up, the IQR is not found by subtracting the mean from the maximum value of a dataset, but instead by calculating the difference between the 75th and 25th percentiles of the dataset.

Therefore, The IQR is calculated as the difference between the 75th and 25th percentiles of a dataset. It is not found by subtracting the mean from the maximum value of the dataset.

To know more about data click-

brainly.com/question/14592520

#SPJ1