The functions f(x) = 500(1.015)* and g (x) =
500(1.021)* give the total amounts in two different savings accounts after x years. How do the graphs of f(x) and g(x) compare?
A. They have the same y-intercept, but the graph of f(x) rises more quickly over time.
B. They have the same y-intercept, but the graph of g(x) rises more quickly over time.
C. The function f(x) has a greater -intercept and rises more quickly over time.
D. The function g(x) has a greater -intercept and rises more quickly over time.

In the given problem, the ramp weighs 10,125 pounds.

To calculate the weight of the ramp, first, determine its volume and then multiply it by the weight of concrete per cubic foot.

The ramp is shaped like a right triangle prism, with a triangular base and three rectangular faces. The ramp's measurements are as follows:1.5 feet in height15 feet is the length of the base (b).6 feet in length (l).

The area of the triangular base can be determined using the triangle area formula: A = 0.5 * b * h A = 0.5 * 15 * 1.5A = 11.25 ft^2

The volume of the ramp can be estimated by multiplying the base area by the ramp length: V = A * l V = 11.25 feet 2 feet 6 feet

V = 67.5 ft^3

Finally, the weight of the ramp can be calculated by multiplying the volume by the weight of concrete per cubic foot:W = V * 150 lbs/ft3 W = 67.5 feet * 150 lbs/ft3 W = 10,125 pounds

As a result, the ramp weighs 10,125 pounds.

Learn more about weight here: https://brainly.com/question/25747113#SPJ1

The square root of the surd expression 4 - 2√5 does not exist

Given that

4-2root5

Express properly

So, we have

4 - 2√5

The root can be expressed as

(√a - √b)

So, we have

(√a - √b)² = 4 - 2√5

Expand

So, we have

a - 2√ab + b = 4 - 2√5

By comparison, we have

a + b = 4

ab = 5

When solved graphically, the system has no solution

Hence, the surd expression has no square root

Read more about radical expression at

https://brainly.com/question/12052952

#SPJ1

Answer:

number is 5

Step-by-step explanation:

let the number be n, then

30 subtracted from 14 times the number is

14n - 30

the result is 20 more than 4 times the number, that is

4n + 20

the equation is then

14n - 30 = 4n + 20 ( subtract 4n from both sides )

10n - 30 = 20 ( add 30 to both sides )

10n = 50 ( divide both sides by 10 )

n = 5

the number is then 5

Answer:

I hope it helped you

Please Mark me brainliest

Answer:

see explanation

Step-by-step explanation:

a

7² = 7 × 7 = 49

b

6³ = 6 × 6 × 6 = 36 × 6 = 216

c

12² = 12 × 12 = 144

d

[tex]2^{4}[/tex] = 2 × 2 × 2 × 2 = 4 × 4 = 16

e

10³ = 10 × 10 × 10 = 100 × 10 = 1000

Answer:

13 miles

Step-by-step explanation:

Because the two mixed fractions have the same denominator, we can add them by adding the two whole numbers and the two fractions themselves to find d or Phil's total distance between Saturday and Sunday:

[tex]d=8\frac{3}{7}+4\frac{4}{7}\\ d=(8+4)+(\frac{3}{7}+\frac{4}{7})\\ d=12+1\\ d=13[/tex]

.

A’(-12,18), B’(-6,6), C’(12,-6), D’(12,12)

When the original claim is expressed in symbolic form, we have p < 0.045.

To symbolize the initial claim adequately, we must assign a value to parameter p.

Let us designate p as the ratio of households possessing solely landline telephones without wireless communication devices.

The original statement denotes that indisputably below 4.5% of households are equipped with exclusively traditional telephone dialers, and absent from contemporary wireless communication alternatives; this assertion can be formulated symbolically as:

p < 0.045

Find out more on symbolic form at https://brainly.com/question/30243284

#SPJ1

The question is:

Express the original claim in symbolic form. Let the parameter represent a value with respect to homes that have only a landline telephone and no wireless phone.

The choice of auto insurance plan depends on the value of the vehicle and financial situation. Plan 2 with higher coverage and deductibles is better for expensive vehicles and those with higher financial stability.

Insurance is a contract between an individual or an entity and an insurance company. The individual or entity pays a premium, and in return, the insurance company agrees to pay for losses or damages that occur, as per the terms of the policy.

Financial stability refers to a situation where an individual, household, company, or economy can manage their financial resources and obligations in a sustainable manner, without facing significant risks or uncertainty.

According to the given information:

Based on my vehicle's value and my financial situation, I have decided to choose Plan 1.

Bodily injury liability coverage provides protection if I were to injure someone while driving, and the amount of coverage in Plan 1 ($25,000 per person up to $50,000 per accident) is adequate for my needs. Property damage liability coverage provides protection for any damage I might cause to someone else's property while driving, and the $25,000 coverage in Plan 1 is also sufficient.

Collision insurance provides coverage for any damage to my own vehicle in the event of an accident, regardless of who is at fault. The $100 deductible in Plan 1 means that I would have to pay the first $100 of any repair costs, but the lower annual premium makes this plan more affordable for me.

Comprehensive insurance provides coverage for non-collision events, such as theft, fire, and natural disasters. Again, the lower annual premium of Plan 1 with a $50 deductible makes it more cost-effective for me.

Uninsured/underinsured motorist coverage is not included in either plan, so I would need to decide if I want to add this coverage as an additional policy or not.

Overall, based on the value of my vehicle and my financial situation, Plan 1 provides adequate coverage at a more affordable price. However, it is important to note that everyone's situation is unique and insurance needs may vary. It is always a good idea to shop around and compare different policies before making a final decision.

To know more about insurance visit:

https://brainly.com/question/30537888

#SPJ1

Therefore, the freight train traveled for 16.67 + 10 = 26.67 hours before the passenger train caught up with it.

let's call the time it took for the passenger train to catch up with the freight train "t" (in hours).

During this time, the freight train traveled at its average speed of 45 km/h for t + 10 hours, while the passenger train traveled at its average speed of 72 km/h for t hours.

We know that the distance both trains traveled is the same, since the passenger train caught up with the freight train. So, we can set up the following equation:

distance traveled by freight train = distance traveled by passenger train

[tex](45 km/h) x (t + 10 h) = (72 km/h) x t[/tex]

Simplifying this equation, we get:

[tex]45t + 450 = 72t[/tex]

[tex]27t = 450[/tex]

t = 16.67 hours

Therefore, the freight train traveled for 16.67 + 10 = 26.67 hours before the passenger train caught up with it.

To know more about hours, visit:

https://brainly.com/question/13533620

#SPJ1

According to the calculation below, Matthew's dad's fish would weigh 5.95 pounds, not 7.12 pounds. Therefore, Matthew's sister is incorrect in her statement.

Both the imperial and US customary systems of measurement utilise the unit of measurement known as pounds (lb) to indicate weight or mass.

The US customary system defines a pound as precisely 0.45359237 kilogrammes, but the imperial system defines a pound as 16 ounces.

The weight of goods in daily life, such as groceries or home items, as well as the weight of the human body are frequently expressed in pounds.

The letter "lb" stands for pounds.

To check if Matthew's sister is correct, we can subtract 1.3 pounds from Matthew's fish weight of 7.25 pounds:

7.25 pounds - 1.3 pounds = 5.95 pounds

To know more about systems of measurement visit:

https://brainly.com/question/29379210

#SPJ1

Answer:

The exponential decay function of the rabbit population P(t) can be expressed as:

P(t) = 144,000 * e^(-0.072t)

Step-by-step explanation:

Where t is the time in years.

This function represents the expected decrease in the rabbit population of Springfield, Ohio, assuming a constant rate of decline of about 7.2% per year. The initial population of rabbits in 2016 was 144,000, and this number is multiplied by the exponential factor e^(-0.072t), which represents the proportion of rabbits that will remain after t years.

As time passes, the value of P(t) will decrease exponentially, reflecting the declining rabbit population. For example, after one year (t=1), the rabbit population is expected to be:

P(1) = 144,000 * e^(-0.072*1) = 133,632

This means that the rabbit population is expected to decrease by about 10,368 rabbits in the first year.

The exponential decay function is commonly used in many fields to model phenomena that exhibit exponential decay over time, such as radioactive decay, bacterial growth, and population dynamics.

The statements that are true include the following:

B. It is the ceiling function.

D. Any decimal or fraction round to the least integer that is greater than x.

In Mathematics, a piecewise-defined function can be defined as a type of function that is defined by two (2) or more mathematical expressions over a specific domain.

Generally speaking, the domain of any piecewise-defined function simply refers to the union of all of its sub-domains. By critically observing the graph of the given piecewise-defined function, we can reasonably infer and logically deduce that it is the ceiling function (least integer function) because it comprises the smallest integer that cannot be smaller than x i.e it assigns a decimal or fraction to the next integer;

x = 1.3 ≈ 2

x = 9 ≈ 9

Read more on piecewise function here: brainly.com/question/18670055

#SPJ1

Answer:

Genotype: 100% rr
phenotype: 100% white

Step-by-step explanation:

since there are no dominant genes the cross will definitely be a rr genotype

The calculated measure of t from the given equation is 15 degrees

From the question, we have the following parameters that can be used in our computation:

10

to

25°

When expressed properly, we have

10° + t° = 25°

Evaluate the like terms

So, we have

t° = 15°

Hence, the value of t° is 25°

Read more about equations at

https://brainly.com/question/18831322

#SPJ1

the probability that the correct combination is written on the paper is 1/1000, or 0.001.

How to solve?

To find the probability that the correct combination is written on the paper, you need to first determine the total number of possible combinations that can be created with the 3 wheels, each numbered from 0 to 9. This can be done using the multiplication principle, which states that if there are m ways to perform one task and n ways to perform another task, then there are m × n ways to perform both tasks.

So, the total number of possible combinations is:

10 × 10 × 10 = 1000

This means that there are 1000 possible combinations for the lock.

Next, you need to determine the number of ways you can choose five different numbers from 0 to 999. This can be done using the combination formula, which is:

nCr = n! / r!(n - r)!

where n is the total number of items to choose from, r is the number of items to choose, and ! represents the factorial function (i.e., the product of all positive integers up to and including that number).

So, the number of ways to choose five different numbers from 0 to 999 is:

nCr = 1000! / 5!(1000 - 5)!

nCr = 1000! / 5!995!

nCr = (1000 × 999 × 998 × 997 × 996) / (5 × 4 × 3 × 2 × 1)

nCr = 831,600,000

This means that there are 831,600,000 ways to choose five different numbers from 0 to 999.

Finally, to find the probability that the correct combination is written on the paper, you need to divide the number of ways to choose the correct combination (which is 1) by the total number of possible combinations:

P(correct combination) = 1 / 1000

So, the probability that the correct combination is written on the paper is 1/1000, or 0.001.

To know more about Probability related question visit:

https://brainly.com/question/30034780

#SPJ1

The standard deviation of the random variable X is 2.73861279.

Standard deviations is a measure of the spread of a data set around the mean. It is calculated by taking the square root of the variance of the data set and is used to measure the variability of a data set from the mean. Standard deviations are used to measure the probability of a certain outcome occurring and can be used to compare different data sets to see how much variability there is in the data.

Standard deviation is a measure of dispersion of data points around the mean of the data set. It is a measure of the variability of the data set. It is calculated by taking the square root of the variance of the data set.

Variance is the average of the squared differences of each data point from the mean. It is calculated by taking the sum of the squares of the differences of each data point from the mean and dividing by the number of data points minus one.

In this case, the mean of the data set is 3, because the probabilities of -2 and 5 are equal.

The variance of the data set is calculated as follows:

Variance = (0.3*(3-(-2))2 + 0.2*(3-3)2 + 0.5*(3-5)2) / (3-1)

Variance = (0.3*25 + 0 + 0.5*4) / 2

Variance = 7.5

The standard deviation of the data set is calculated by taking the square root of the variance, which is equal to 2.73861279.

Therefore, the standard deviation of the random variable X is 2.73861279.

To know more about standard deviations click-
https://brainly.com/question/475676
#SPJ1

Answer:

Without a visual or additional information, it is difficult to determine the exact value represented by point X. However, we can make some observations based on the answer choices:

A. X < 0.36 would indicate that point X is to the left of 0.36 on the number line, which is not consistent with the position of X in the diagram.

B. X < 0.37 would indicate that point X is to the left of 0.37 on the number line, which is not consistent with the position of X in the diagram.

C. X = 0.36 would indicate that point X is exactly at 0.36 on the number line, which is a possibility based on the diagram.

D. X = 0.37 would indicate that point X is exactly at 0.37 on the number line, which is not consistent with the position of X in the diagram.

Therefore, the best answer choice that describes the value represented by point X is C) X = 0.36.

The answer is: The coordinates of point B are (4.3, 2.5)

A scatterplot is a type of graph that shows how two variables relate to each other. The values of the two variables are each represented by a point in the set of points that make up the graph.

Let's first find the distance between points A (1, 5) and C (1.75, 2.5).
We can use the distance formula:

[tex]d = \sqrt{ (x_2 - x_1)^2 + (y_2 - y_1)^2 }[/tex]

where x₁ = 1, y₁ = 5, x₂ = 1.75, and y₂ = 2.5

[tex]d = \sqrt{ (1.75 - 1)^2 + (2.5 - 5)^2 }[/tex]  = [tex]\sqrt{[0.5625 + 6.25]}[/tex] = √6.8125 = 2.61

Now, since the line is divided into four equal parts, the distance between points C and B is also √6.8125.
Let's assume the x-coordinate of point B is "b". The y-coordinate of point B will be the same as the y-coordinate of point C which is 2.5 (since they are on the same horizontal line).

Use the distance formula for the x-coordinate of point B (b, 2.5):

d = √6.8125 = [tex]\sqrt{ [(b - 1.75)^2 + (2.5 - 2.5)^2] }[/tex]

√6.8125  =  [tex]\sqrt{ (b - 1.75)^2 }[/tex]

6.8125 = (b - 1.75)²

6.8125 = b² - 3.5b + 3.0625

Simplifying:

b² - 3.5b - 3.75 = 0

Using the quadratic formula:

b = (3.5 ± √(3.5² + 4(3.75)))/2

b = (3.5 ± √(27.25))/2

b = (3.5 ± 5.22)/2

So, b = 4.36 or b = -0.86. Since the line segment goes from left to right, the x-coordinate of point B must be greater than the x-coordinate of point A (which is 1). Therefore, the answer is:

The coordinates of point B are (4.3, 2.5).

To know more about coordinates, visit:
https://brainly.com/question/31293074
#SPJ1

Answer:

The measure of angle KGH is 180° - 48°, or 132°.

Therefore, the size of angle KGH is 48º.

An angle is a portion of a circle, where a circle has 360° in total. A right angle is a quarter of a circle and is 90°, but a straight angle is equal to the circumference of the circle and is 180°. Using a protractor, you can gauge the size of an angle.

Given that GH and EF are parallel, we can infer from the fact that FHE and HFE are at opposing angles that angle HFE must also be 48o.

Since the opposite angles in a parallelogram are equal, we know that angle KGH is also equal to angle HFE, which is 48º.

Therefore, the size of angle KGH is 48º.

To know more about angle visit:-

https://brainly.com/question/28451077

#SPJ1

The angle measure of RUT is m∠RUT = 33°.

The diameter of an arc within a circle is equal to the diameter of the central angle that subtends the arc.

Therefore, if we know the length of an arc, we may calculate the length of its corresponding central angle.

In this case, we are given that the measure of the minor arc RT is 66°.

We need to find the measure of angle RUT.

We achieve this by taking use of the fact that an inscribed angle's measure is half that of its equivalent central angle.

Since angle RUT is an inscribed angle that intercepts arc RT, we have:

m∠RUT = 1/2 × m/RT

m∠RUT = 1/2 × 66°

m∠RUT = 33°.

Therefore, the measure of angle RUT is 33°.

To learn more about the angle measure;

brainly.com/question/14684647

#SPJ1

Answer:

1/32xp

Step-by-step explanation:

but not sure was there a picture to go with this

The combination of existing functions is not limited to function composition. Another method is to do addition, subtraction, multiplication, and division on the functions using standard algebraic operations.

In mathematics, the process of "function composition" combines two functions, f and g, to produce h = g f, where h(x) = g(f(x)).

Function composition is the process of combining two functions to produce a third function.

Simply using the first function's output as the input for the second function is how it works.

The function g is applied in this operation on the outcome of applying the function f to x.

In other words, the functions f: X Y and g: Y Z are combined to create a function that maps x in domain X to g(f(x)) in codomain Z. If z were a function of y and y were a function of x, it seems sensible that z would be a function of x.

The final composite function is denoted by the notation (g f)(x) = g(f(x)) for all x in X, and is represented by the notation g f: X Z. [nb 1]

Read more about composite function here:

https://brainly.com/question/10687170

#SPJ1

Answer:

To solve the inequality 40(7−5x)<7−25(8x+2), we can start by distributing the 40 on the left side and the -25 on the right side:

280 - 200x < 7 - 200x - 50

Next, we can combine like terms on both sides:

230 - 200x < -200x - 43

Now, we can add 200x to both sides:

230 < -43

This is a false statement, which means that there is no solution to the inequality. Therefore, the inequality 40(7−5x)<7−25(8x+2) is false for all values of x.

instead, they either involve random selection or selection for certain expressions jobs.

It is possible to multiply, divide, add, or subtract in mathematics. The following is how an expression is put together: Number, expression, and mathematical operator The components of a mathematical expression (such as addition, subtraction, multiplication or division, etc.) include numbers, variables, and functions. It is possible to contrast expressions and phrases. An expression, often known as an algebraic expression, is any mathematical statement that contains variables, numbers, and an arithmetic operation between them. For instance, the word m in the given equation is separated from the terms 4m and 5 by the arithmetic symbol +, as does the variable m in the expression 4m + 5.

The first choice is a combination since it entails picking four students from a group to serve in particular committee positions without respect to their order. The other choices don't include picking a group of people without taking into account their rank or position within the group; instead, they either involve random selection or selection for certain jobs.

To know more about expressions visit :-

https://brainly.com/question/14083225

#SPJ1

Answer:

B(x) appears to be an exponential function because the population increases at a constant rate over time. This can be seen by observing that the population roughly triples with each passing year, indicating that the function is of the form B(x) = ab^x, where a is the initial population and b is the growth factor. To confirm this, we can calculate the growth factor by dividing the population at each successive year by the population in the previous year. For example, we have:

b = B(1)/B(0) = 6/2 = 3

b = B(2)/B(1) = 18/6 = 3

b = B(3)/B(2) = 54/18 = 3

and so on.

M(x) appears to be a quadratic function because the population growth rate is not constant, but rather increases over time. This can be seen by observing that the rate of increase in the population growth appears to accelerate as time goes on, suggesting that the function is of the form M(x) = ax^2 + bx + c, where a, b, and c are constants. To confirm this, we can plot the data and observe that the graph has a parabolic shape.

S(x) also appears to be a quadratic function for similar reasons to M(x), where the population growth rate increases over time.

From the given data, the function S(x) appears to be the same type as W(x) because both are quadratic functions. Both functions appear to have an increasing rate of growth over time.

Step-by-step explanation:

The data presented shows the growth of the Javanese gibbon population on three different islands over time.

Data trends must be analyzed to determine the type of function that is modeling population growth. A common way to do this is to plot the data points and observe the shape of the curve. However, since the table only contains data, you can analyze trends by looking at the differences between consecutive terms.

To do this, we can calculate the first difference and the second difference in the population data.

The first difference:

- Swing: 40 - 30 = 10, 50 - 40 = 10, 60 - 50 = 10

Example: 60 - 50 = 10, 75 - 60 = 15, 90 - 75 = 15

- Salavati: 80 - 60 = 20, 100 - 80 = 20, 120 - 100 = 20

The second difference:

- Batanta: 10 - 10 = 0, 10 - 10 = 0

- Example: 15 - 10 = 5, 15 - 15 = 0

- Salavati: 20 - 20 = 0, 20 - 20 = 0

The first difference is constant for each island and shows a linear relationship between time and population growth. Also, the second difference is zero, indicating a constant rate of change.

Therefore, we can conclude that the population growth modeling function is a linear function that can be written as

M(x) = mx + b

where x is the time in years, m is the slope (population growth rate), and b is the y-intercept (initial population).

learn more about data:

brainly.com/question/26711803

#SPJ1

We can use the Law of Sines to solve for the sides of the triangle. The Law of Sines states that for any triangle with sides a, b, and c opposite angles A, B, and C, respectively:

a/sin A = b/sin B = c/sin C

We can use this formula to solve for any side of a triangle if we know the measures of two angles and the length of one side.

Let's label the sides of the triangle as follows:

a is opposite angle A (which measures 47°)

b is opposite angle B (which measures 36°)

c is opposite angle C (which measures 97°)

We want to find the largest side, so let's solve for all three sides using the Law of Sines and then compare them:

a/sin 47° = b/sin 36° = c/sin 97°

Solving for a:

a = sin 47° (b/sin 36°) = (sin 47°/sin 36°) b

Solving for b:

b = sin 36° (a/sin 47°) = (sin 36°/sin 47°) a

Solving for c:

c = sin 97° (a/sin 47°) = (sin 97°/sin 47°) a

To compare the sides, we can simply compare the coefficients in front of a and b:

a = (sin 47°/sin 36°) b ≈ 1.336 b

c = (sin 97°/sin 47°) a ≈ 2.117 a

Therefore, c is the largest side of the triangle. We can find its exact value by plugging in the given angle measures:

c = (sin 97°/sin 47°) a ≈ 2.117 a

a/sin 47° = c/sin 97°

a = (sin 47°/sin 97°) c ≈ 0.702 c

So the largest side, c, is approximately 2.117 times the length of the smallest side, a. We don't know the actual length of any side, since we don't have any side lengths to use as reference.

Answer:

In any triangle, the sum of the angles is always 180 degrees. So we can use this fact to find the measure of angle A and angle B:

m∠C + m∠A + m∠B = 180

Substituting the given values, we get:

97° + 47° + 36° = 180°

Simplifying this equation, we get:

180° = 180°

This confirms that the given angle measures are valid.

To find the largest side of the triangle, we can use the law of sines, which relates the sides of a triangle to the sines of their opposite angles:

a/sin(A) = b/sin(B) = c/sin(C)

where a, b, and c are the lengths of the sides opposite angles A, B, and C, respectively.

We want to find the largest side, which is opposite the largest angle. Since angle C is the largest angle, we can set up the proportion:

a/sin(A) = b/sin(B) = c/sin(C)

a/sin(47°) = b/sin(36°) = c/sin(97°)

To find the largest side, we need to find the largest value of the expression a/sin(47°). We can start by finding the value of b/sin(36°) and c/sin(97°) using the given information.

Using the law of sines, we can write:

b/sin(36°) = c/sin(97°)

b = (sin(36°)/sin(97°))c

Now, substituting this expression for b, we get:

a/sin(47°) = (sin(36°)/sin(97°))c/sin(36°)

Simplifying this expression, we get:

a/sin(47°) = c/sin(97°)

a = (sin(47°)/sin(97°))c

Now, we need to find the value of c. Using the law of sines again, we can write:

a/sin(47°) = b/sin(36°) = c/sin(97°)

c = (sin(97°)/sin(47°))a

Substituting the expression we found for a, we get:

c = (sin(97°)/sin(47°))(sin(47°)/sin(97°))c

c = c

So, we see that c is equal to itself, which doesn't give us any new information. However, we can use the expression we found for a to determine the largest side:

a = (sin(47°)/sin(97°))c

Since sin(47°) < sin(90°) and sin(97°) > sin(90°), we know that sin(47°)/sin(97°) < 1. Therefore, the largest side of the triangle is c, which is opposite the largest angle, angle C.

In conclusion, we cannot determine the exact length of the largest side without additional information, but we know that it is opposite angle C, which has a measure of 97 degrees.

Using the probability, we can find that when a single card is drawn from the deck, the probability of not drawing a king is 12/13.

The ability to occur is known as probability. The occurrence of random events is the subject of this branch of mathematics. The value is expressed as a number between 0 and 1. Probability has been introduced in mathematics to predict how likely events are to occur.

Here the total number of cards in a deck is 52.

There are four jacks, four queens, and four kings in a deck of 52 cards. Twelve face cards follow.

If we choose one of the king cards here, then:

Probability of drawing a king will be:

P = 4/52

= 1/13

Now, we have to find the probability of not drawing a king, so:

Probability = 1 - 1/13

= 13-1/13

=12/13

Therefore, when a single card is drawn from the deck, the probability of not drawing a king is 12/13.

To know more about probability, visit:

https://brainly.com/question/16484393

#SPJ1

Since the calculated t-value (2.26) is greater than the critical t-value (1.734), we can reject the null hypothesis and conclude that there is sufficient evidence to support the claim that using name-brand microwave popcorn results in a greater percentage of popped kernels than store-brand microwave popcorn at the 0.05 level of significance.

In statistics, a test statistic is a numerical summary of a sample that is used to assess the evidence provided by data in favor of some conjecture about the population from which the sample was drawn. A test statistic compares the observed data to what is expected under the null hypothesis, and measures how many standard errors the observed data deviates from the expected value. Test statistics are used in hypothesis testing to determine the likelihood that an observed effect or difference between groups is due to chance, or whether it is statistically significant.

Here,

To determine if using name-brand microwave popcorn results in a greater percentage of popped kernels than store-brand microwave popcorn, we can compare the mean percentage of popped kernels between the two groups using a hypothesis test.

Let μ1 be the mean percentage of popped kernels for name-brand microwave popcorn and μ2 be the mean percentage of popped kernels for store-brand microwave popcorn.

The null hypothesis is that there is no difference in the mean percentage of popped kernels between name-brand and store-brand microwave popcorn:

H0: μ1 - μ2 = 0

The alternative hypothesis is that the mean percentage of popped kernels for name-brand microwave popcorn is greater than the mean percentage of popped kernels for store-brand microwave popcorn:

Ha: μ1 - μ2 > 0

We can use a two-sample t-test with unequal variances to test this hypothesis. Assuming a significance level of 0.05, the critical t-value for a one-tailed test with 18 degrees of freedom is 1.734.

Using the given data, we find that the sample mean percentage of popped kernels for name-brand microwave popcorn is 90.9% with a sample standard deviation of 5.09%, and the sample mean percentage of popped kernels for store-brand microwave popcorn is 85.9% with a sample standard deviation of 4.67%.

We can calculate the test statistic as follows:

t = (x1 - x2 - 0) / √(s1²/n1 + s2²/n2)

t = (90.9 - 85.9) / √((5.09²/10) + (4.67²/10))

t = 2.26

Therefore, based on this study, using name-brand microwave popcorn is likely to result in a greater percentage of popped kernels than store-brand microwave popcorn.

To know more about test statistic,

brainly.com/question/14128303

#SPJ1

Answer:

T = 45

Step-by-step explanation:

T ÷ 15 = 3

Time 15 on both sides

T = 45