The zeroth law of thermodynamics pertains to what relational condition that may exist between two systems?

According to the question the radius of the cylinder is 1.32 cm and the height of the cylinder is also 1.32 cm.

Radius is a term used to describe the distance from the center to the circumference of a circle. It can also be used to measure the distance from the center of a sphere to its surface. The radius is half of the diameter, which is the distance from one side of the circle or sphere to the other.

The surface area of a right circular cylinder can be calculated using the formula A = 2πrh + 2πr2, where r is the radius of the cylinder and h is the height of the cylinder. In this case, the radius of the cylinder is 1.32 cm and the height of the cylinder is also 1.32 cm. Plugging these values into the formula, we get: A = 2π(1.32) x (1.32) + 2π(1.32)2 = 6.25 cm2.

To learn more about radius

https://brainly.com/question/30295580

#SPJ1

The light we use on a daily basis is then in an unpolarized form as a result.

In everyday experience, radio waves are polarized, whereas light is not, due to their different sources and interactions with the environment. Radio waves are generated by antennas, which emit waves in a specific direction and with a fixed orientation.

This causes the electric field of the radio waves to have a particular alignment, resulting in polarization. On the other hand, light comes from a variety of sources, like the sun, lamps, and LED screens, which emit light in all directions and with random orientations of the electric field.

This results in an unpolarized state for the light we encounter in everyday situations.

Learn more about unpolarized state.

brainly.com/question/13099118

#SPJ11

When light wave of particular frequency falls on a object this occurrence of event is photoelectric effect. This effect then stimulates emission of electron from the object.

For more information on photoelectric effect kindly visit to

https://brainly.com/question/26465043

#SPJ1

Complete question : A. Describe the photoelectric effect and explain why it could not be explained by Newtonian physics.

b. Explain what is meant by quantized light, and discuss why the photoelectric effect provides evidence for it.

c. Write 2 - 3 sentences explaining how quantum mechanics describes light and matter. How do the distinct lines in the emission spectra of elements support the idea that light can behave as a particle?

When the oscillation of the particles in a medium is parallel to the direction of the wave's motion, this type of wave is called a longitudinal wave.

In a longitudinal wave, the particles of the medium vibrate back and forth along the direction of the wave's motion, rather than moving perpendicular to it. This creates areas of compression and rarefaction in the medium, which travel through the medium as the wave moves.

A common example of a longitudinal wave is a sound wave. When sound is produced, it causes the air particles to vibrate back and forth in the same direction that the sound is traveling. As these vibrations travel through the air, they create areas of compression and rarefaction, which our ears perceive as sound.

Another example of a longitudinal wave is a seismic wave, which is produced by earthquakes and travels through the Earth's crust. Seismic waves cause the particles in the Earth's crust to vibrate back and forth parallel to the direction of the wave's motion.

Therefore, a longitudinal wave is a wave in which the oscillation of particles in the medium is parallel to the direction of the wave's motion. Sound waves and seismic waves are examples of longitudinal waves.

To learn more about oscillations click:

brainly.com/question/30111348

#SPJ4

A gyroscope has a moment of inertia of 0.14kg×m2 and an initial angular speed of 15 rad/s. Friction in the bearings causes its speed to reduce to zero in 30s.The closest answer choice to this value is 3.3 * 10^-2 N*cm, so the answer is (a).

The average frictional torque formula is

α = τ / I
Where α is the angular acceleration, τ is the torque, and I is the moment of inertia.
We can rearrange this formula to solve for τ:
τ = α * I
The gyroscope starts with an initial angular speed of 15 rad/s, and comes to a stop after 30 seconds. We can use this information to find the angular acceleration:
α = (0 - 15 rad/s) / 30 s
α = -0.5 rad/s^2
Now we can use the moment of inertia given (0.14 kg*m^2) and the calculated angular acceleration to find the frictional torque:
τ = (-0.5 rad/s^2) * (0.14 kg*m^2)
τ = -0.07 N*m
The frictional torque is negative because it is acting in the opposite direction of the gyroscope's initial angular velocity. To find the average frictional torque, we can assume that the frictional torque is constant over the 30 seconds that it takes for the gyroscope to come to a stop:
τ_avg = τ / t
τ_avg = (-0.07 N*m) / (30 s)
τ_avg = -2.33 * 10^-3 N*m
We need to convert this to N*cm to match the units in the answer choices:
τ_avg = -2.33 * 10^-3 N*m * (100 cm / 1 m)
τ_avg = -0.233 N*cm

The closest answer choice to this value is 3.3 * 10^-2 N*cm, so the answer is (a).

Read more about Moment of inertia.

https://brainly.com/question/15246709

#SPJ11

The fraction of energy carried by the reflected sound is small if the surface is smooth and hard.

This is because when sound waves hit a smooth and hard surface, they bounce back in a very predictable manner, following the law of reflection.

This means that the angle of incidence is equal to the angle of reflection, and the sound waves are directed away from the surface in a way that does not scatter or disperse the energy.

As a result, the amount of energy that is reflected is relatively small compared to the energy that is absorbed or transmitted through the surface.

In contrast, rough and soft surfaces tend to scatter and absorb sound waves, which can result in a higher fraction of energy being reflected back.

This is why soundproofing materials are often designed to be soft and porous, in order to absorb and dampen sound waves rather than reflect them back into space.

For more such answers on soundproofing materials

https://brainly.com/question/30258610

#SPJ11

The most common net charge of an atom is Neutral. So, option c) is correct.

An atom consists of protons, neutrons, and electrons. Protons carry a positive charge, electrons carry a negative charge, and neutrons have no charge. In a neutral atom, the number of protons equals the number of electrons, which results in the charges canceling each other out.

Therefore, the net charge of the atom is zero or neutral. This is the most common charge state for an atom in its natural state.

In certain circumstances, atoms can gain or lose electrons and become charged particles called ions. If an atom loses electrons, it will have more protons than electrons and carry a positive charge, becoming a positive ion or cation.

Conversely, if an atom gains electrons, it will have more electrons than protons and carry a negative charge, becoming a negative ion or anion. While these charged states do occur, they are less common than neutral atoms.

In summary, the most common net charge of an atom is neutral, as the number of protons and electrons in the atom balance each other out, resulting in a net charge of zero. Therefore, option c) is correct.

Learn more about charge:

https://brainly.com/question/18102056

#SPJ11

To increase the period of oscillation (T) in a horizontal mass-spring system, you can either increase the mass (M) or decrease the spring constant (K).

The time taken for an oscillating particle to complete one cycle of oscillation is known as the Period of oscillating particle.

To increase the period of oscillation (T) of a mass (M) placed on a spring with a spring constant (K) and pulled back a distance (x) on a frictionless surface, you can change one of the following factors:

1. Increase the mass (M): Increasing the mass will cause the period of oscillation to increase because the spring will take more time to complete one oscillation cycle.

2. Decrease the spring constant (K): Reducing the spring constant will make the spring less stiff, allowing the mass to oscillate more slowly, thus increasing the period of oscillation.

Learn more about oscillation:

https://brainly.com/question/12622728

#SPJ11

No, not all galaxies have spiral arms. The newly-formed stars and other luminous matter in the galaxy follow slightly elliptical orbits and they become concentrated along the spiral arms, making these arms more visible.

There are various types of galaxies, and they are generally classified into three main categories: spiral, elliptical, and irregular. Spiral galaxies have distinct spiral arms, while elliptical galaxies do not have any specific structure and are mostly spherical or elliptical in shape. Irregular galaxies also lack a well-defined structure and may have some chaotic appearance.

Spiral galaxies, like our own Milky Way, have spiral arms due to the density wave theory. This theory suggests that the spiral arms are formed as a result of gravitational interactions and the distribution of matter in the galaxy. The density wave moves through the galactic disk, compressing gas and dust, which eventually triggers the formation of new stars. As the newly-formed stars and other luminous matter in the galaxy follow slightly elliptical orbits, they become concentrated along the spiral arms, making these arms more visible.

The differences in galaxy types can be attributed to factors such as their formation history, the composition of their matter, and the various interactions they have undergone. Spiral galaxies typically have a flat rotating disk, a central bulge, and a surrounding halo of stars, whereas elliptical galaxies consist of a more homogeneous distribution of stars without a clear disk or spiral structure.

For more such questions on Galaxy.

https://brainly.com/question/24420400#

#SPJ11

For a given element, the black lines on an absorption spectrum appear at specific wavelengths.

Where the energy of the incoming light matches the energy required to excite electrons in the element's atoms from their ground state to higher energy levels. These wavelengths correspond to the specific electronic transitions that are possible within the element's atomic structure. Each element has a unique set of absorption lines that can be used to identify it, making absorption spectroscopy a powerful tool for chemical analysis and identification. For a given element, the black lines on an absorption spectrum appear at specific wavelengths corresponding to the energy levels of the element's electrons. These lines are called absorption lines and they occur when electrons absorb energy and transition from lower to higher energy levels.

Learn more about wavelengths :

https://brainly.com/question/28466888

#SPJ11

When the block slides up the ramp to point p, the total mechanical energy of the block remains constant and the total mechanical energy of the block-earth system decreases.

What is mechanical energy?

Mechanical energy of a body is the sum of the Kinetic energy and potential energy.

As the block slides up the ramp to point P, its mechanical energy decreases due to the work done by gravity against the block's motion. This work is equal to the change in the block's potential energy, which is mgh, where m is the mass of the block, g is the acceleration due to gravity, and h is the height of the ramp.

At the same time, the block gains kinetic energy due to its motion up the ramp. This gain in kinetic energy is equal to the work done by the component of the block's weight parallel to the ramp, which is mgh sin(theta), where theta is the angle of the ramp with respect to the horizontal.

Therefore, the total mechanical energy of the block alone remains constant since the loss in potential energy is equal to the gain in kinetic energy.

However, the total mechanical energy of the block-earth system decreases as the block gains potential energy and the Earth gains an equal amount of potential energy in the opposite direction. This is because the block and Earth together form a closed system, and the total mechanical energy of a closed system remains constant only if there are no external forces acting on it. In this case, gravity is an external force that does work on the block and transfers energy to the Earth, causing a decrease in the system's total mechanical energy.

To know more about mechanical energy visit:

https://brainly.com/question/29979940

#SPJ11

When the block slides up the ramp to point p, the total mechanical energy of the block remains constant and the total mechanical energy of the block-earth system decreases.

The mechanical energy of a body is the sum of the Kinetic energy and potential energy.

The mechanical energy of the block diminishes as it slides up the ramp to point P due to the effort done by gravity against the block's motion. This effort is equivalent to the change in potential energy of the block, which is mgh, where m is the mass of the block, g is gravity's acceleration, and h is the height of the ramp.

Simultaneously, the block accumulates kinetic energy as it moves up the ramp. This increase in kinetic energy is equal to the work done by the block's weight component parallel to the ramp, which is much sin(theta), where theta is the ramp's angle with respect to the horizontal.

Therefore, the total mechanical energy of the block alone remains constant since the loss in potential energy is equal to the gain in kinetic energy.

To know more about mechanical energy visit:

brainly.com/question/29979940

#SPJ4

A) The solution has a molarity of 0.1176 M.  B) The pipet contains 0.00353 moles of copper(II) nitrate and C) The new solution has a molarity of 0.0147 M.

A) Cu(NO3)2 has a molar mass of 187.55 g/mol.

Mass / molar mass = number of moles

5.52 g / 187.55 g/mol equals the number of moles.

Molecular weight: 0.0294 mol

Molarity is equal to the moles of solute per litre of solution.

250.0 mL = 0.2500 L

Molarity is equal to 0.0294 mol/0.2500 L.

Molarity equals 0.1766 M

The solution's molarity is 0.1176 M as a result.

B) The solution's molarity, which we determined in section (a):

Liquid volume divided by the molarity gives the moles of Cu(NO3)2

Molecules of Cu(NO3)2 are equal to 0.1176 M and 0.0300 L, respectively.

As a result, the pipet contains 0.00353 moles of copper(II) nitrate.

C) The solution has been reduced by a factor of 8 by Mrs. Mandochino (240.0 mL / 30.0 mL). The new molarity is thus 1/8 of the initial molarity:

Molarity = 0.0147 M / Molarity = 0.1176 M / 8

As a result, the new solution has a molarity of 0.0147 M.

To know more about Molarity here:

brainly.com/question/8732513

#SPJ1

Answer: Sounds are made when objects vibrate. The vibration makes the air around the object vibrate and the air vibrations enter your ear, You hear them as sounds

Explanation:

The simplifying approximation made in the derivation of the wave equation is that the maximum displacement is small.

What is Wave?

A wave is a disturbance that propagates through space or a medium, transporting energy from one point to another without the transfer of mass. Waves can take many forms, including electromagnetic radiation, sound waves, water waves, seismic waves, and more.

In the derivation of the wave equation, the wave is assumed to be a small disturbance from its equilibrium state. This means that the displacement of the wave from its equilibrium position is small relative to the wavelength of the wave. This assumption allows us to linearize the equation of motion and apply Newton's second law to the system.

Learn more about Wave

https://brainly.com/question/25699025

#SPJ1

This means that Q completes 41 oscillations while P completes 40 oscillations the answer is (A) 1 oscillation.

The pendulums will move in phase with each other when the time taken for each oscillation is an integer multiple of the common time period. Let T be the common time period between P and Q.

Then, the time taken for P to complete one oscillation is 1.90 s. Therefore, we have:

[tex]1.90 s = n * T[/tex], where n is an integer.

Similarly, the time taken for Q to complete one oscillation is 1.95 s, so:

[tex]1.95 s = m * T[/tex], where m is an integer.

To find the number of oscillations made by Q between two consecutive instants when P and Q move in phase with each other, we need to find the smallest integers n and m such that their ratio m/n is close to 1. Let's divide the second equation by the first:

[tex]1.95 s / 1.90 s = m * T / n * T[/tex]

Simplifying, we get:[tex]1.026 = m/n[/tex]

Now we need to find the smallest integers m and n such that m/n is close to 1.026. One way to do this is to use continued fractions. We have:

[tex]1.026 = 1 + 1/(1 + 1/40.15)[/tex]

Therefore, the best approximation for m/n is:

[tex]m/n = 41/40[/tex]

This means that Q completes 41 oscillations while P completes 40 oscillations. The number of oscillations made by Q between two consecutive instants when P and Q move in phase with each other is therefore:

[tex]41 - 40 = 1[/tex]

for such more questions on oscillations

https://brainly.com/question/22499336

#SPJ11

The mass of the planet that exerts a 1.5 x 10^13 N force on a 5.4 x 10^30 kg star is approximately 1.34 x 10^25 kg.

To calculate the mass of a planet, we can use Newton's law of universal gravitation. The formula is:

F = G * (m1 * m2) / r^2

where F is the gravitational force, G is the gravitational constant (6.674 × 10^-11 N*(m/kg)^2), m1 and m2 are the masses of the two objects, and r is the distance between them.

In this case, F = 1.5 x 10^13 N, m1 (mass of the star) = 5.4 x 10^30 kg, and r = 1.6 x 10^11 m. We want to find m2, the mass of the planet. Rearrange the formula to solve for m2:

m2 = (F * r^2) / (G * m1)

Now plug in the given values:

m2 = (1.5 x 10^13 N * (1.6 x 10^11 m)^2) / (6.674 × 10^-11 N*(m/kg)^2 * 5.4 x 10^30 kg)

After performing the calculations, you get:

m2 ≈ 1.34 x 10^25 kg

So, the mass of the planet that exerts a 1.5 x 10^13 N force on a 5.4 x 10^30 kg star is approximately 1.34 x 10^25 kg.

To learn more about mass, refer below:

https://brainly.com/question/19694949

#SPJ11

The acceleration of a point on the edge of a circular platform with a 4.0 m radius is 127 m/s² when its angular velocity is 1.0 rev/s and has a constant angular acceleration of 20.0 rad/s².

We can use the kinematic equations of rotational motion to solve this problem.

The first kinematic equation for rotational motion is:

ωf = ωi + αt

where ωf is the final angular velocity, ωi is the initial angular velocity, α is the angular acceleration, and t is the time.

We can use this equation to find the time it takes for the platform to reach an angular velocity of 1.0 rev/s:

1.0 rev/s = ωi + (20.0 rad/s²)t

ωi = 0 (initially at rest)

t = 1.0 rev/s / 20.0 rad/s²

t = 0.05 s

Next, we can use the second kinematic equation for rotational motion:

θ = ωit + 1/2 αt²

where θ is the angular displacement.

We can use this equation to find the angular displacement of a point on the edge of the platform during the time it takes to reach an angular velocity of 1.0 rev/s:

θ = (0)(0.05 s) + 1/2 (20.0 rad/s²)(0.05 s)²

θ = 0.0125 rad

Finally, we can use the third kinematic equation for rotational motion:

ωf² = ωi² + 2αθ

We can use this equation to find the acceleration of a point on the edge of the platform at the instant its angular velocity is 1.0 rev/s:

ωf = 1.0 rev/s = 2π rad/s

ωi = 0

θ = 0.0125 rad

a = (2π rad/s)² / 2(0.0125 rad)

a = 127 m/s²

Therefore, the acceleration of a point on the edge of the platform at the instant its angular velocity is 1.0 rev/s is 127 m/s².

Learn more about Kinematic equations

brainly.com/question/30581474

#SPJ11

After the Sun leaves the constellation Sagittarius, it takes approximately one year, or 365.25 days, for it to return to this constellation.

This is because the Sun follows a path through the 12 zodiac constellations over the course of one year, known as the ecliptic. As the Earth orbits the Sun, the Sun appears to move through each of these constellations in turn.
Sagittarius is one of the constellations along this path, and the Sun typically passes through it between November 22 and December 21 each year. Once the Sun moves past Sagittarius, it continues on its journey through the remaining zodiac constellations until it completes its orbit and returns to Sagittarius approximately one year later.
It is worth noting that due to variations in the Earth's orbit, the exact dates on which the Sun enters and leaves each zodiac constellation can vary slightly from year to year. However, the overall period of one year remains consistent, meaning that the Sun will always return to Sagittarius approximately one year after it last passed through the constellation.

For more such questions on constellation visit:

https://brainly.com/question/29901972

#SPJ11

Answer:

Propulsive

Explanation:

Friction grabs the rim at the point of contact and pulls it backwards. This causes a torque that causes angular acceleration; thus increasing angular velocity over time.

Answer:

Sound waves in the thin Martian atmosphere travel at 245 m/sm/s.

Explanation:

The magnitude of the force of friction acting on the block is approximately 4.2 N. The correct answer is 3) 4.2 N.

To find the magnitude of the force of friction acting on the block, we can use the equation:

f_friction = m * (g * sin(θ) - a)

Where:
- f_friction is the force of friction
- m is the mass of the block (1.8 kg)
- g is the acceleration due to gravity (9.81 m/s²)
- θ is the angle of the inclined plane (10°)
- a is the acceleration of the block down the incline (3.8 m/s²)

f_friction = 1.8 * (9.81 * sin(10°) - 3.8)

Calculating this, we get:

f_friction ≈ 4.2 N

So, the magnitude of the force of friction acting on the block is approximately 4.2 N. The correct answer is 3) 4.2 N.

To learn more about mass, refer below:

https://brainly.com/question/19694949

#SPJ11

According to Newton's laws of motion, the amount of force that one object exerts on another is directly proportional to its mass and acceleration. In other words, the greater the mass and acceleration of an object, the greater the force it will exert on another object.

Additionally, the force between two objects also depends on their distance from each other. This is described by the inverse square law, which states that the force between two objects decreases as the square of the distance between them increases. So if two objects are moved farther apart, the force between them will decrease.

It's also important to note that the force between two objects is always equal and opposite. This is known as Newton's third law of motion, which states that for every action, there is an equal and opposite reaction.

Therefore, to predict which object will exert a greater force on another, we need to consider factors such as the mass and acceleration of each object, their distance from each other, and the nature of the interaction between them. These factors will determine the overall force exerted and the direction of that force.

To learn more about Newton's  law of motion click:

https://brainly.com/question/29775827

#SPJ4

By using the Pythagoras theorem to determine the height where Carolina should place the hook to hold the lights, we find that she should place them at a height of 12.81 ft.

Let us assume the points on the given triangle as following:

A = the point where the lights will be secured into the ground

B = the position where Carolina is standing, holding the lights

C = the point on the tree where the hook will be placed to hold the lights

D = the bottom of the tree trunk

Now, we want to determine the height of point C on the tree because we are aware that the length of the lights is feet long.

Using the Pythagoras theorem,

AB² + BC² = AC²

Since Carolina is 10 feet away from the tree, we know that AB = 10 feet, and BC = 8 feet because the lights are 8 feet long and we want them to hang straight down. We can change these numbers in the equation to:

=10² + 8² = AC²

=100 + 64 = AC²

= AC² = √164

= AC ≈ 12.81 feet

Therefore, Carolina should place the hook about 12.81 feet up the tree to hold the lights straight.

To know more about the Pythagoras theorem, refer:

https://brainly.com/question/24138028

#SPJ4

In an inelastic collision, the objects involved stick together after impact, causing a greater deformation and a longer duration of contact. This results in a relatively wider force-time curve with a lower peak force.

When we talk about collisions, we often use force-time curves to understand the behavior of the objects involved. In an inelastic collision, the objects involved stick together after colliding, meaning that some energy is lost as heat or sound. On the other hand, in a nearly elastic collision, the objects bounce off each other and conserve most of their kinetic energy.
Comparing the force-time curves for these two types of collisions, we would expect to see some differences. In an inelastic collision, the force-time curve will generally show a larger force over a longer period of time compared to a nearly elastic collision. This is because in an inelastic collision, the objects are deforming as they stick together, creating a larger force as they do so.
In a nearly elastic collision, the force-time curve will show a shorter duration of high force, as the objects bounce off each other and transfer most of their kinetic energy without deforming. The curve will also show a more gradual decrease in force as the objects separate, since there is less energy being dissipated as heat or sound.
Overall, the force-time curves for inelastic and nearly elastic collisions will look different due to the different ways that energy is transferred and dissipated during the collision.

In a nearly elastic collision, the objects rebound after impact with minimal deformation, leading to a shorter contact duration. This produces a steeper, narrower force-time curve with a higher peak force.

Learn more about collision here

https://brainly.com/question/31356190

#SPJ11

On an average diet, the consumption of 10 liters of oxygen releases 120 kJ of energy. So, the correct answer is option e.

When 10 litres of oxygen are consumed, 120 kJ (kilojoules) of energy are released.

This is computed by dividing the volume of oxygen consumed (10 litres) by the amount of energy released (4.8 kcal or 4.2 kJ) per litre of oxygen ingested.

Therefore, 4.2 kJ x 10 liters, or 120 kJ, is the total energy released by the ingestion of 10 litres of oxygen. The body uses this energy for a number of metabolic processes, including digestion, respiration, and physical activity.

The body's primary energy source, ATP (adenosine triphosphate), is produced only using oxygen. In conclusion, using 10 litres of oxygen daily will result in the release of 120 kJ of energy.

To learn more about consumption visit:

https://brainly.com/question/14375681

#SPJ4

The number of overtones and their relative intensities are associated with the quality of the tone generated by a musical instrument. The correct option is c.

Quality, also known as timbre, is the characteristic sound of an instrument that distinguishes it from others. Overtones are additional frequencies that are produced along with the fundamental frequency of a note when it is played.

The number and intensity of these overtones determine the unique timbre of the instrument.

The attack pattern refers to the initial transient sound produced when a note is played, while interference pattern refers to the interference of sound waves from multiple sources.

Range, on the other hand, refers to the span of notes an instrument can produce.

For more such questions on intensities, click on:

https://brainly.com/question/14252912

#SPJ11

The statement "There must be equal amounts of mass on both sides of the center of mass of an object" is true.

The center of mass is a point in an object where the mass is equally distributed on all sides.

It is the point at which an object would balance if it were placed on a pivot.

This is due to the equal distribution of mass around the center of mass, which ensures the object's stability.

Therefore, the statement "There must be equal amounts of mass on both sides of the center of mass of an object" is true.

Learn more about "mass": https://brainly.com/question/86444

#SPJ11

Passive force is generated in skeletal muscles when they are stretched beyond their resting length.

The range of skeletal muscle lengths that generate passive force is typically greater than the resting length, up to the maximum elongation the muscle can tolerate without tearing. This range is also known as the muscle's "physiological range of motion". The amount of passive force generated by the muscle increases as it is stretched further beyond its resting length, until it reaches a maximum at the point of muscle failure.

You can learn more about skeletal muscle at

https://brainly.com/question/12252128

#SPJ11

The relationship is F2 = 1/8 F1. The correct option is E.

When the two spheres are separated by distance d, the electrostatic force of attraction between them is given by Coulomb's law:

F1 = (k * Q^2) / d^2

where k is the Coulomb constant.

When the spheres are touched and then separated again by distance d, they will share their charges, so each sphere will have a charge of +Q/2 and -Q/2. The electrostatic force between them will be:

F2 = (k * (+Q/2)^2) / d^2 = (k * Q^2) / (4 * d^2)

Therefore, the ratio of F2 to F1 is:

F2/F1 = [(k * Q^2) / (4 * d^2)] / [(k * Q^2) / d^2] = 1/4

So, F2 is 1/4 of F1.

However, the question asks for the relationship between F2 and F1 in terms of the force on the left sphere (not the total force of attraction between the spheres). When the spheres are separated, the force on the left sphere is F1/2, since the two spheres are identical and the force is evenly distributed between them. Similarly, when the spheres are re-separated, the force on the left sphere is F2/2. Therefore, the relationship between F2 and F1 in terms of the force on the left sphere is:

F2/2 = (1/8) (F1/2)

or

F2 = (1/8) F1

The other options are not true because:

(A) 2F1 = F1 - This is not true because the force of attraction between the spheres decreases when they are re-separated, so 2F1 would be greater than F1, not equal to it.

(B) F1 = F1 - This is always true, but it does not provide any information about the relationship between F2 and F1.

(C) F1 = 2F1 - This is not true because the force of attraction between the spheres decreases when they are re-separated, so F1 would be greater than 2F1, not equal to it.

(D) F1 = 4F1 - This is not true because the force of attraction between the spheres decreases when they are re-separated, so F1 would be greater than 4F1, not equal to it.

Therefore, the correct option is (E) F2 = 1/8 F1.

To learn about Ohm's law click:

https://brainly.com/question/1247379

#SPJ4

As the mass passes through the equilibrium positions the force of the spring is increasing.

Simple harmonic motion is a specific kind of periodic motion of a body that arises from a dynamic equilibrium between an inertial force that is proportional to the body's acceleration away from the static equilibrium position and a restoring force on the moving object that is directly proportional to the magnitude of the object's displacement and acts towards the object's equilibrium position. Oscillating spring perform SHM.

as the mass passes through the equilibrium position, at the equilibrium position the force is zero and it increases with increase in displacement x according to the relation F = kx.

To know more about Spring :

https://brainly.com/question/14670501

#SPJ4.