Triangle RST has the coordinates R(1 , 3), S(3 , 8), and T(5 , 3). Which of the following sets of points represents a dilation from the origin of triangle RST?
A.
R'(5 , 15), S'(15 , 40), T'(25, 15)
B.
R'(5 , 3), S'(3 , 40), T'(25 , 3)
C.
R'(5 , 3), S'(15 , 8), T'(25 , 3)
D.
R'(6 , 8), S'(8 , 13), T'(10 , 8)

The estimated proportion (as a decimal) of the voting population that prefers Candidate A is 0.76, and the 95% confidence interval is (0.713, 0.807).

To estimate the proportion of the voting population (P) that prefers Candidate A based on the sample of 400 people, we can use the sample proportion:

[tex]p = 304/400 = 0.76[/tex]

We can construct a confidence interval for the true proportion P using the following formula:

[tex]p \± z\sqrt{(p(1-p)/n)[/tex]

where z* is the critical value from the standard normal distribution for a 95% confidence level [tex](z\times = 1.96)[/tex], sqrt is the square root function, and n is the sample size (n = 400).

Substituting the values, we get:

[tex]0.7 \± 1.96\sqrt{(0.76(1-0.76)/400)[/tex]

Simplifying this expression, we get:

[tex]0.76 \± 0.047[/tex]

The 95% confidence interval for the true proportion of the voting population that prefers Candidate A is:

(0.713, 0.807)

For similar questions on voting

https://brainly.com/question/28044305

#SPJ11

Answer:

Part A:

The comparison is "greater than".

Explanation: Since Richard has only a fraction (specifically, 34/1) of the number of blue marbles that Parker has, multiplying a whole number (Parker's marbles) by a fraction (34/1) results in a product that is less than the original whole number (Parker's marbles). Therefore, Parker must have more blue marbles than Richard.

Part B:

To determine how many blue marbles Richard has, we can multiply the number of blue marbles Parker has by the fraction representing the fraction of blue marbles Richard has compared to Parker, which is 34/1.

Richard has 12 (Parker's marbles) multiplied by 34/1 (the fraction representing the fraction of blue marbles Richard has compared to Parker):

Richard has 12 * 34/1 = 408 blue marbles.

Step-by-step explanation:

in the answer

The critical numbers of the function given its derivative function is (c)

[tex]y' = 5(x + 8)(x - 7)'(x + 1)[/tex]

a.) To find the critical numbers of f(x), we need to find where the derivative of f(x) is equal to zero or undefined. The derivative function f'(x) has zeros at x=0, x=-1, and x=4, so these are potential critical numbers. We also need to check for any values where the derivative is undefined, but f'(x) is defined for all values of x, so there are no additional critical numbers.

b.) The function g(x) is the exponential function [tex]e^(x-7)[/tex], so [tex]g'(x) = e^(x-7)[/tex]. This derivative is never equal to zero or undefined, so there are no critical numbers for g(x).

c.) The derivative of y(x) is [tex]y'(x) = 5(x+8)(x-7)(x+1)'[/tex], where (x+1)' = 1. Setting y'(x) equal to zero, we get 5(x+8)(x-7) = 0, which has solutions x=-8 and x=7. These are the critical numbers of y(x).

d.) The function h(x) is the product of the constant 6 and the exponential function[tex]e^(x^2+4)[/tex], so [tex]h'(x) = 12x*e^(x^2+4)[/tex]. This derivative is never equal to zero or undefined, so there are no critical numbers for h(x).

To find the critical numbers of a function given its derivative function, we need to set the derivative equal to zero and solve for the values of x that make the derivative zero. We also need to check for any values of x where the derivative is undefined. These critical numbers correspond to potential maximum or minimum points of the function, which can be determined by using the second derivative test or by analyzing the behavior of the function near the critical points.

Learn more about exponential here:

https://brainly.com/question/14355665

#SPJ4

The total length of the curve swept out by the point (x, y) as θ ranges from 0 to 2π is 64π units.

We can start by finding the derivative of x and y with respect to θ:

dx/dθ = -16 sin θ

dy/dθ = 16 cos θ

Using the formula for arc length of a curve in polar coordinates, we have:

L = ∫(a to b) √(r² + (dr/dθ)²) dθ

where r is the distance from the origin to the point (x, y).

Substituting x and y into r, we get:

r = √(x² + y²) = √(256 [tex]cos^{2\theta[/tex] + 256 [tex]sin^{2\theta[/tex]) = 16

Substituting dx/dθ and dy/dθ into (dr/dθ), we get:

(dr/dθ) = √((-16 sin θ)² + (16 cos θ)²) = 16

Therefore, the total length of the curve swept out by the point (x, y) as θ ranges from 0 to 2π is:

L = [tex]\int\limits^{2 \pi}_0[/tex] √(r² + (dr/dθ)²) dθ

= [tex]\int\limits^{2 \pi}_0[/tex] √(256 + 256) dθ

= [tex]\int\limits^{2 \pi}_0[/tex] 32 dθ

= 32θ |o to (2π)

= 64π

To learn more about length click on,

https://brainly.com/question/1566081

#SPJ4

Answer:

The answer is TRUE

Step-by-step explanation:

In general, only if the expected successes and failures are 10 are the normal distribution is used to approximate the sampling distribution of the sample proportion: np > 10,n(l - p) > 10.

The x-intercepts are (0, 0), (1, 0) and (-1, 0), the y-intercept is (0, 0), the stationary points are (1, 0), (-1, 0), (1/√5, 16/25√5) and (-1/√5, -16/25√5) and the inflection points are (0, 0), (√(3/5), 4/25√(3/5)) and (-√(3/5), -4/25√(3/5)).

Given that a function p(x) = x (x² - 1)², we need to find the coordinates of the intercepts, stationary points, and the inflection point,

x-intercept =

0 = x (x² - 1)²

x = 0,

x² - 1 = 0

x = ± 1

Thus, the x-intercepts are (0, 0), (1, 0) and (-1, 0)

y-intercept =

y = x (x² - 1)²

y = 0(0-1)²

y = 0

Thus, y-intercept is (0, 0)

Differentiate the function,

dy/dx = d/dx[x (x² - 1)²]

= (x² - 1)² + 4x²(x²-1)]

= (x²-1)(5x²-1)

Put dy/dx = 0

(x²-1)(5x²-1) = 0

x²-1 = 0

x = ±1

5x²-1 = 0

x = ±1/√5,

When, x = ±1 then y = 0

When x = 1/√5, then,
y = 1/√5((1/√5)²-1)²

= 16/25√5

Similarly, for x = -1/√5,

y = -1/√5((1/√5)²-1)²

= -16/25√5

Thus, the stationary points are (1, 0), (-1, 0), (1/√5, 16/25√5) and (-1/√5, -16/25√5)

Now, differentiate the function y = (x²-1)(5x²-1)

d²y/dx² = (5x²-1)2x + (x²-1)10x

= 20x³ - 12x

Put d²y/dx² = 0,

20x³ - 12x = 0

4x(5x²-3) = 0

4x = 0, x = 0

5x²-3 = 0

x = ±√(3/5)

When x = 0, y = 0,

When x = √(3/5)

y = √(3/5)((√(3/5))²-1)²

= 4/25(√(3/5))

When x = -√(3/5)

y = -√(3/5)((√(3/5))²-1)²

Thus, the inflection points are (0, 0), (√(3/5), 4/25√(3/5)) and (-√(3/5), -4/25√(3/5)).

Hence the x-intercepts are (0, 0), (1, 0) and (-1, 0), the y-intercept is (0, 0), the stationary points are (1, 0), (-1, 0), (1/√5, 16/25√5) and (-1/√5, -16/25√5) and the inflection points are (0, 0), (√(3/5), 4/25√(3/5)) and (-√(3/5), -4/25√(3/5)).

Learn more about inflection points and stationary points click;

https://brainly.com/question/31400472

#SPJ4

A z-test was conducted to determine if community college students who lived on their own took more time to earn an AA. The results showed that the sample of 36 students who lived on their own took an average of 3.8 years (SD = 0.453) to earn their AA, which was significantly longer than the population mean of 3.3 years, z = 2.58, p = 0.005 (one-tailed). Therefore, there is sufficient evidence to support the chancellor's theory that students who live on their own take longer to graduate.

For this scenario, the appropriate way to finish reporting the results in APA format depends on the type of hypothesis test used.
If a one-sample t-test was used to test the hypothesis, the appropriate way to finish reporting the results in APA format would be:
A one-sample t-test was conducted to determine if community college students who lived on their own took more time to earn an AA. The results showed that the sample of 36 students who lived on their own took an average of 3.8 years (SD = 0.453) to earn their AA, which was significantly longer than the population mean of 3.3 years,

t(35) = 3.26, p = 0.002 (one-tailed).

Therefore, there is sufficient evidence to support the chancellor's theory that students who live on their own take longer to graduate.
If a z-test was used to test the hypothesis, the appropriate way to finish reporting the results in APA format would be:
A z-test was conducted to determine if community college students who lived on their own took more time to earn an AA. The results showed that the sample of 36 students who lived on their own took an average of 3.8 years (SD = 0.453) to earn their AA,

which was significantly longer than

the population mean of 3.3 years,

z = 2.58, p = 0.005 (one-tailed).

Therefore, there is sufficient evidence to support the chancellor's theory that students who live on their own take longer to graduate.

learn more about the population mean

https://brainly.com/question/30727743

#SPJ11

The probability that a high school student chosen at random is in 11th grade or volunteers is 0.61 or 61%. This was obtained by adding the probabilities of being in 11th grade and volunteering and subtracting the probability of being both.

To find the probability that a student chosen at random is in 11th grade or volunteers, we need to add the probabilities of the two events.

The number of students who volunteered is 306, and the total number of students is 600, so the probability of a student chosen at random volunteering is

P(volunteer) = 306/600 = 0.51

The number of students in 11th grade is 167, and the total number of students is 600, so the probability of a student chosen at random being in 11th grade is

P(11th grade) = 167/600 = 0.28

To find the probability that a student chosen at random is in 11th grade or volunteers, we add these probabilities

P(11th grade or volunteer) = P(11th grade) + P(volunteer) - P(11th grade and volunteer)

We need to subtract the probability of a student being both in 11th grade and volunteering because we have already counted them once in each of the probabilities above. From the table, we can see that the number of students who are in 11th grade and volunteered is 110, so

P(11th grade and volunteer) = 110/600 = 0.18

Substituting the values, we get

P(11th grade or volunteer) = 0.28 + 0.51 - 0.18 = 0.61

Therefore, the probability that a student chosen at random is in 11th grade or volunteers is 0.61 or 61%.

To know more about Probability:

https://brainly.com/question/11234923

#SPJ4

Yes, it is appropriate to see if there is a significant effect due to either A or B. The P-value for B is P=0.0001, which rejects the null hypothesis that there is no effect due to B. (option d).

In this scenario, the question is whether there is a significant effect from the interaction of two variables, A and B, and whether there is a significant effect due to either A or B individually. The results show that the P-value for the interaction is 0.3958, which means we fail to reject the null hypothesis that there is no effect due to the interaction.

It is important to note that even though we reject the null hypothesis for B, we cannot conclude that there is a significant effect due to A, as we have not conducted a separate hypothesis test for A.

However, in scenario (d), we are told that it is appropriate to test for a significant effect due to either A or B, as we have significant evidence of an effect due to B. In this case, we can conduct a separate hypothesis test for A to determine whether there is a significant effect due to A as well.

Hence the correct option is (d).

To know more about significant effect here

https://brainly.com/question/15278426

#SPJ4

The tangent line to the curve at (1 ,- 1) is  found by using the point-slope formula: is, y + 1 = 0

Now, We can find the value of x and y values corresponding to t=1.

Hence, They are:

⇒ x= (1) = 1

And,  y = (1) - 2 = - 1

And, The slope of the tangent line to the graph is

⇒ dy/dx =   dy/dt / dx / dt = (2t - 2) / 1          

Thus, dy/dx (at t=1)

dy / dx = 0

3.  Now we have both a point (1, - 1) on the graph and the slope of the tangent line to the curve at that point: 0

Hence, The tangent line to the curve at (1 ,- 1) is  found by using the point-slope formula:

⇒ y - y₁ = m(x - x₁)

⇒ y - (-1) = 0 (x - 1),

or y + 1 = 0

Thus,  The tangent line to the curve at (1 ,- 1) is  found by using the point-slope formula: is, y + 1 = 0

Learn more about the equation of line visit:

https://brainly.com/question/18831322

#SPJ4

Since the calculated z-score (6.7) is greater than the critical z-score (2.33), the null hypothesis can be rejected, and it can be concluded that students who take the course score significantly higher than the general population.

The formula for Cohen’s d is (562-500)/100 = 0.62.

The effect size, estimated using Cohen’s d, was moderate (d = 0.62)."

a. To determine whether students who take the course score significantly higher than the general population, a one-tailed hypothesis test can be used with α = .01. The null hypothesis is that there is no difference between the sample mean and the population mean, and the alternative hypothesis is that the sample mean is significantly higher than the population mean. Using the formula for a z-score, the calculated z-score is (562-500)/(100/sqrt(20)) = 6.7. The critical z-score at α = .01 for a one-tailed test is 2.33.

b. Cohen’s d can be used to estimate the size of the effect of taking the course on SAT scores. Cohen’s d is calculated by taking the difference between the sample mean and the population mean, and dividing it by the standard deviation of the population. In this case, the formula for Cohen’s d is (562-500)/100 = 0.62. This indicates a medium effect size according to Cohen's guidelines.

c. In a research report, the results of the hypothesis test and the measure of effect size would be reported. For example, "The results of the one-tailed hypothesis test showed that students who took the course scored significantly higher on the SAT than the general population (z = 6.7, p < .01).

Know more about critical z-score here:

https://brainly.com/question/23946270

#SPJ11

The polynomial that shows that the left side is rising and the right side is falling is: Option D: -2x⁷ + ¹/₂x⁶ - 8x⁵ + 3x⁴ + 2x³ - 5x² + x - 7

The end behavior of a polynomial function is defined as the behavior of the graph of f(x) as x approaches positive infinity or negative infinity. The degree and the leading coefficient of a polynomial function determine the end behavior of the graph.

Now, we are told that the left side is rising and the right side is falling. This means that both beginning and the end terms will have a negative sign attached to them.

The only option that shows both first and last terms having negative numbers is option D.

Read more about Polynomial End behavior at: https://brainly.com/question/1365136

#SPJ1

The differential of the given function when y = f(x) and f(x) = 4x² + 8x is given by dy = (8x + 8)dx.

Function is equal to,

y = f(x)

And f(x) = 4x² + 8x

The differential of the function y = f(x) = 4x² + 8x,

Take the derivative of y with respect to x, which is equal to,

dy/dx = 8x + 8

This gives us the rate of change of y with respect to x.

The differential of y by multiplying both sides by dx ,

dy = (8x + 8)dx

Therefore, the differential of the function y = 4x² + 8x is equal to

dy = (8x + 8)dx

learn more about function here

brainly.com/question/30956182

#SPJ4

The above question is incomplete, the complete question is:

Let y = f(x), where f(x) = 4x² + 8x .Find the differential of the function dy =.

a. The probability in a sample of 100 lipsticks that the proportion that are flawed is more than 0.054 is 0.3372.

b. Therefore, the probability in a sample of 100 lipsticks that the proportion that are flawed is less than 0.0542 is 0.6409.

c. The probability in a sample of 100 lipsticks that the proportion that are flawed is between 0.048 and 0.0522 is 0.3182.

To solve this problem, we can use the normal distribution since the sample size is large enough (n=100) and the proportion of flawed lipsticks (p=0.05) is not too small or too large.

(a) Let X be the number of flawed lipsticks in a sample of 100.

Then X follows a binomial distribution with n=100 and p=0.05.

We can use the normal approximation to the binomial distribution with mean np=5 and variance np(1-p)=4.75.

Let Z be the standard normal random variable, then

P(X > 0.054*100) = P(X > 5.4)

[tex]= P((X - 5)/\sqrt{(4.75) } > (5.4 - 5)/\sqrt{(4.75)} )[/tex]

= P(Z > 0.42)

= 1 - P(Z ≤ 0.42)

= 1 - 0.6628

= 0.3372.

(b) Using the same approach as in part (a), we have

P(X < 0.0542*100) = P(X < 5.42)

[tex]= P((X - 5)/\sqrt{(4.75)} < (5.42 - 5)/\sqrt{(4.75)} )[/tex]

= P(Z < 0.362)

= 0.6409.

(c) Using the same approach as in part (a), we have

P(0.048100 < X < 0.0522100) = P(4.8 < X < 5.22)

[tex]= P((4.8 - 5)/\sqrt{(4.75)} < (X - 5)/\sqrt{(4.75)} < (5.22 - 5)/\sqrt{(4.75)} )[/tex]

= P(-0.63 < Z < 0.21)

= P(Z < 0.21) - P(Z < -0.63)

= 0.5832 - 0.2650

= 0.3182.

For similar question on probability.

https://brainly.com/question/30429067

#SPJ11

The area inside one leaf of the rose is (9/8)π square units.

To find the area inside one leaf of the rose, we can use the formula for the area enclosed by a polar curve, which is:

[tex]A = (1/2) \int[\alpha ,\beta] r (\theta)^2 d\theta,[/tex]

where r(θ) is the equation of the curve in polar coordinates, and α and β are the angles that define the portion of the curve that we want to find the area of.

For the rose curve given by r = 6 sin(4θ), we can see that one leaf is traced out as θ varies from 0 to π/4.

So we can find the area inside one leaf by evaluating the integral:

[tex]A = (1/2) \int [0,\pi /4] (6 sin(4\theta ))^2 d\theta[/tex]

Simplifying the integrand, we get:

[tex]A = (1/2) \int [0,\pi /4] 36 sin^2(4\theta ) d\theta[/tex]

Using the identity [tex]sin^2(\theta ) = (1/2)(1 - cos(2\theta )),[/tex]we can rewrite this as:

A = (1/2) ∫[0,π/4] 18 - 18 cos(8θ) dθ

Integrating, we get:

A = [9θ - (9/8) sin(8θ)] [0,π/4]

A = [9(π/4) - (9/8) sin(2π)] - [0 - (9/8) sin(0)]

A = (9/8)π.

For similar question on area.

https://brainly.com/question/23353279

#SPJ11

It will take about 1.28 years (or 15 months) for the money to double in this account with continuous compounding.

After 10 years $57,000 grows to $96,500 in an account withcontinuous compounding. How long will it take money to double inthis account? Report your answer to the nearest month.

We can use the continuous compounding formula to solve this problem:

A = Pe^(rt)

where:

A = the amount after time t

P = the initial amount (principal)

r = the annual interest rate (as a decimal)

t = time (in years)

We are given that P = $57,000, A = $96,500, and the interest is compounded continuously. Therefore, we can solve for t:

ln(A/P) = rt

ln(96,500/57,000) = rt

0.54077 = rt

To find the time it takes for the money to double, we need to find the value of t when A = 2P (i.e., $114,000). Therefore, we can set up the following equation:

ln(2) = rt

ln(2) = 0.54077*t

t = ln(2)/0.54077

t ≈ 1.28 years

Therefore, it will take about 1.28 years (or 15 months) for the money to double in this account with continuous compounding.

To know more about compounding-

brainly.com/question/14295570

#SPJ4

If Caleb take 5/6 of hour and Seth took 9/10 of Caleb's time , then we can say that Caleb spent more time to complete the math homework.

The time taken by Caleb to complete his math's homework is = (5/6) of hour,

So, the Caleb's-time will be = (5/6)×60 = 50 minutes,

We also know that, Seth took (9/10) of Caleb's time, which means:

⇒ Seth's-Time is = (9/10) × 50 = 45 minutes.

On observing time taken by both Caleb and Seth,

We see that Caleb's time is greater than Seth's Time ,

Therefore, Caleb take more-time to complete the home work.

Learn more about Time here

https://brainly.com/question/28843457

#SPJ4

The missing lengths of each pair of similar figures are, respectively:

Case 10:

x = 50, y = 24 / 5, z = 400 / 3

Case 11:

x = 8√2, y = 32, z = 36

In this question we find two systems of similar figures, a pair of similar quadrilaterals and a pair of similar right triangles. Two figures are similar when both have congruent angles and each pair of corresponding sides are not congruent but proportional. Then, these systems can be described by proportion formulas:

Case 10

18 / 60 = y / 16 = 15 / x = 40 / z

Now we proceed to determine the missing lengths:

18 / 60 = y / 16

y = (18 / 60) × 16

y = 24 / 5

18 / 60 = 15 / x

x = (60 / 18) × 15

x = 50

18 / 60 = 40 / z

z = (60 / 18) × 40

z = 400 / 3

Case 11

z / 12 = 12 / 4

z = 12² / 4

z = 36

y + 4 = z

y = 36 - 4

y = 32

By Pythagorean theorem:

x = √(12² - 4²)

x = 8√2

To learn more on similar triangles: https://brainly.com/question/29731302

#SPJ1

The x-coordinate of the point of inflection is 9/4.

The interval on the left of the inflection point is 9/4 and on the function is concave down at (-∞, 9/4).

The interval on the right of the inflection point is 9/4 and on the function is concave up at (9/4, ∞).

In the given question we have to determine the intervals on which the given function is concave up or down and find the point of inflection.

The given function is:

f(x) = x(x−4√x)

Firstly finding the first and second derivatives.

f(x) = x^2−4x^{3/2}

f'(x) = 2x−4*3/2*x^{1/2}

f'(x) = 2x−6x^{1/2}

f''(x) = 2−6*(1/2)*x^{−1/2}

f''(x) = 2−3x^{−1/2}

Now finding the inflection point by equating the second derivative equal to zero.

f''(x) = 0

2−3x^{−1/2} = 0

After solving

x = 9/4

For left half of the number line of 9/4, f''(x)<0. So, the function is concave down in (-∞, 9/4).

For left right of the number line of 9/4, f''(x)>0. So, the function is concave up in (9/4, ∞).

To learn more about function concave up and down link is here

brainly.com/question/15323903

#SPJ4

complete question:

Determine the intervals on which the given function is concave up or down and find the point of inflection. Let f(x) = x(x−4√x)

The x-coordinate of the point of inflection is: ____

The interval on the left of the inflection point is: ____ , and on this interval f is: __ concave up? or down? __

The interval on the right is: ____ , and on this interval f is: __ concave up? or down? __

Therefore, the cone's base radius is roughly 2.31 cm, and its vertical angle is roughly 70.8° (which was rounded to the closest degree).

A cone is a smooth-tapering, three-dimensional geometric object with a flat base and a pointed or rounded apex. A circle is used to create it by dragging it along an axis that is parallel to the circle's plane. The cone's apex is formed by the line's intersection with the circle, and the cone's base is formed by the circle.

a) The sidewall of the cone will be formed by the circle's sector. The following formula can be used to determine how long the sector's arc is:

Arc length is calculated as (angle/360) x 2r, where r is the circle's radius.

In this instance, the length of  radius is 7.2 cm, and the angle is 300°. So,

Arc length equals (300/360) x 2 x (7.2) = 15

The cone's lateral surface area will be equal to the length of the sector's arc, and its base will be a circle of radius r. We thus have:

cone's lateral surface area equals rl.

where l is the cone's slant height. Using the sector's angle and radius, we can calculate l as follows:

ℓ² = r² + h²

h = r cos(150°)

h = -3.6

ℓ² = r² + (-3.6)² ℓ = √(r² + 12.96)

Now we can relate the cone's lateral surface area to the sector's arc's length:

r2(r2 + 12.96) = 225 r4 + 12.96r2 - 225 = 0 rl = 15 r2(r2 + 12.96) = 15

This equation is quadratic in r2. The quadratic formula can be used to find the value of r2:

r² = (-12.96 ± √(12.96² + 4(225)))/2 r² = 5.313 or r² = 33.647

We have r = 5.313 2.31 cm since r should be positive.

Therefore, the cone's base radius is roughly 2.31 cm.

b) The following formula can be used to determine the cone's vertical angle:

tan(θ/2) = r/ℓ

where l is the slant height, r is its base radius, and is the cone's vertical angle. Since we already understand r and l, we may find :

tan(θ/2) = 2.31/√(2.31² + 12.96)

θ/2 = tan⁻¹(0.308) θ ≈ 35.4°

As a result, the cone's vertical angle is roughly 70.8° (with a to the nearest degree).

To know more about Cone visit:

https://brainly.com/question/16394302

#SPJ1

(a)  The base radius of the cone formed is approximately 6.00 cm.

(b) The vertical angle of the cone is approximately 38° (to the nearest degree).

What is circle?

A circle is a geometric shape that consists of all points in a plane that are equidistant from a fixed point called the center.

a) To find the base radius of the cone, we need to first find the length of the arc that makes up the sector.

The circumference of the full circle is 2πr, where r is the radius. So the circumference of the circle with radius 7.2 cm is:

C = 2π(7.2) ≈ 45.19 cm

The sector we're interested in has an angle of 300°, which is 5/6 of the full circle. So the length of the arc that makes up the sector is:

(5/6)C = (5/6)(45.19) ≈ 37.66 cm

Now we can use this length as the circumference of the base of the cone, and the radius of the base of the cone (let's call it R) is what we're trying to find. The formula for the circumference of a circle is C = 2πR, so we can set these two equations equal to each other and solve for R:

2πR = 37.66

R = 37.66/(2π)

R ≈ 6.00 cm

So the base radius of the cone formed is approximately 6.00 cm.

b) To find the vertical angle of the cone, we can use the formula:

tan(θ) = (opposite/adjacent)

where θ is the vertical angle of the cone, opposite is half the diameter of the base of the cone (which is just the radius we found in part a), and adjacent is the height of the cone.

We already found that the radius of the base of the cone is approximately 6.00 cm, so the diameter is 12.00 cm, and the opposite is half of that, or 6.00 cm. We just need to find the height of the cone now.

To do this, we can use the fact that the sector we started with can be rolled up to form the lateral surface of the cone. The length of the lateral surface of a cone is given by:

L = πr√(r² + h²)

where r is the radius of the base of the cone and h is the height. We already found that the radius is approximately 6.00 cm, and we know that the length of the lateral surface is approximately 37.66 cm (which is the same as the length of the arc that made up the sector). So we can plug in these values and solve for h:

37.66 = π(6.00)√(6.00² + h²)

h ≈ 8.15 cm

Now we have all the information we need to find the vertical angle:

tan(θ) = (6.00/8.15)

θ ≈ 38°

So the vertical angle of the cone is approximately 38° (to the nearest degree).

To learn more about circle from the given link:

https://brainly.com/question/29142813

#SPJ1

the variance of the time between checkouts is 64 minutes squared

The variance of the time between checkouts can be calculated using the formula for the variance of an exponential distribution:

Var(X) = λ^-2

where λ is the rate parameter of the exponential distribution, which is equal to the reciprocal of the mean, i.e., λ = 1/8 = 0.125 (since the mean time between checkouts is 8 minutes).

Substituting the value of λ into the formula, we get:

Var(X) = (0.125)^-2 = 64

Therefore, the variance of the time between checkouts is 64 minutes squared

learn about variance,

https://brainly.com/question/9304306

#SPJ11

The Laplace transform of the solution. Y(s) = L {y(t)} = (24 / s⁵ + 5) / s and y(t) = 4t³ + t².

Consider the following initial value problem, defined for t ≥ 0: dy/dt = t³t, y(0) = 5.

a. Find the Laplace transform of the solution.                                                                                                                                                      

 Y(s) = L {y(t)} =b.

Obtain the solution y(t). y(t) =a.

Laplace transform of the solution:                                                                                                                                                                    First, let's solve the differential equation dy/dt = t³t.

We can rewrite it as dy/dt = t⁴.

Then, we'll take the Laplace transform of both sides.

Using the formula L{y'} = sY(s) - y(0),

we get:

sY(s) - y(0) = L{dy/dt}

= L{t⁴} = 4! / s⁵sY(s) - 5

= 24 / s⁵sY(s)

= 24 / s⁵ + 5Y(s)

= (24 / s⁵ + 5) / s

Therefore, the Laplace transform of the solution is Y(s) = (24 / s⁵ + 5) / s.

b. Solution: To obtain the solution y(t), we'll take the inverse Laplace transform of Y(s).

We can rewrite Y(s) as: Y(s) = (24 / s⁵ + 5) / s = 24 / s⁶ + 5s² / s⁶

By using the formula L⁻¹{1/sⁿ} = tⁿ⁻¹ / (n⁻¹)!, L⁻¹{sⁿ} = tⁿ⁺¹ / (n + 1)!, and L⁻¹{F(s)G(s)} = f(t) * g(t), we can find the inverse Laplace transform of Y(s).L⁻¹{Y(s)} = L⁻¹{24 / s⁶} + L⁻¹{5s² / s⁶}= 4t³ + t².

Therefore, the solution to the initial value problem is y(t) = 4t³ + t².

To know more about "LEPLACE TRANSFORM" refer here:

brainly.com/question/30759963#

#SPJ4

Total area 59 square units.

To find the area under the split-domain function from x=-2 to x=3, we need to integrate each piece of the function separately over the given interval.

For x < 0, we have f(x) = 2x + 5. We can integrate this as follows:

∫(from -2 to 0) (2x + 5) dx = [x^2 + 5x] (from -2 to 0) = (0^2 + 5(0)) - (-2^2 + 5(-2)) = 4 + 10 = 14.

For x ≥ 0, we have[tex]f(x) = 5x^2[/tex] We can integrate this as follows:

∫(from 0 to 3) (5x^2) dx [tex]= [5/3 x^3][/tex] (from 0 to 3)

[tex]= 5/3 (3^3 - 0^3)[/tex]

= 45

Therefore, the total area under the function from x=-2 to x=3 is the sum of the areas of the two pieces

For similar question on area.

https://brainly.com/question/27057965

#SPJ11

The missing value in the first equation is n = -2.

Here we have the equation:

[tex](x^n*y^3)^{-2} = \frac{x^4}{y^6}[/tex]

And we want to solve this for n.

Remember the exponent rule:

[tex](x^n)^m = x^{n*m}[/tex]

Then we can write the left side as:

[tex](x^n*y^3)^{-2} = x^{-2n}*y^{3*-2} = \frac{x^{-2n}}{y^6}[/tex]

And the exponent of x must be 4, then:

-2n = 4

n = 4/-2

n = -2

The missing value is -2.

Learn more about exponents at:

https://brainly.com/question/847241

#SPJ1

The limit is expressed as the integral from 0 to 4 of [(176x/3)² - 2(x/3)³]dx using the definition of a Riemann sum.

To express the given limit as an integral, we can use the definition of a Riemann sum

[tex]\lim_{n \to \infty}[/tex] ∑ i=1 to n  [(176i/n)^2 - 2((i/3)^³) * (4/n)] * (4/n)

This can be simplified as

[tex]\lim_{n \to \infty}[/tex] [(4/n) * ((176/3)² + (172/3)² + ... + (8/3)²) - (32/n) * ((1/3)³ + (2/3)³ + ... + (n/3)³)]

Taking the limit as n approaches infinity, this becomes:

∫₀⁴ [(176x/3)² - 2(x/3)³] dx

Therefore, the given limit can be expressed as the integral from 0 to 4 of [(176x/3)² - 2(x/3)³] dx.

To know more about Integral:

https://brainly.com/question/18125359

#SPJ4

To construct a 90% confidence interval for the average speed of cars on the highway with a margin of error no more than ±0.5 mph and a standard deviation of 7 mph, you must clock at least 339 cars.

Step 1: Identify the critical value (z-score) for a 90% confidence interval. This can be found in a standard z-table or using a calculator. The critical value for a 90% confidence interval is 1.645.

Step 2: Use the margin of error (E) formula to calculate the sample size (n):
E = (z * σ) / √n

Where E is the margin of error (0.5 mph), z is the critical value (1.645), σ is the standard deviation (7 mph), and n is the sample size.

Step 3: Rearrange the formula to solve for n:
n = (z * σ / E)^2

Step 4: Plug in the values and calculate the sample size:
n = (1.645 * 7 / 0.5)^2
n ≈ 338.89

Since the sample size must be a whole number, round up to the nearest whole number.

To construct a 90% confidence interval for the average speed of cars on the highway with a margin of error no more than ±0.5 mph and a standard deviation of 7 mph, you must clock at least 339 cars.

Learn more about Statistics: https://brainly.com/question/29093686

#SPJ11

the focused deterrence strategies employed in the city are working to reduce crime.

To create probabilities to show the focused deterrence worked in the city, we can calculate the conditional probabilities of crime reduction given the neighborhood received focused deterrence and crime reduction given the neighborhood did not receive focused deterrence.

Let A be the event that the neighborhood received focused deterrence, and B be the event that crime was reduced. Then, the probabilities we can calculate are:

P(B|A) = 75/90 = 0.8333

P(B|A') = 5/30 = 0.1667

Where A' is the complement event of A (the neighborhood did not receive focused deterrence).

These probabilities show that crime reduction is much more likely when the neighborhood received focused deterrence, indicating that the focused deterrence strategies employed in the city are working to reduce crime.

learn about probability,

https://brainly.com/question/13604758

#SPJ11

The probability that a random sample of 100 bulbs will have an average life of more than 1,870 hours is approximately 14.69%

To find the probability that a random sample of 100 bulbs will have an average life of more than 1,870 hours, we need to use the mean, standard deviation, and sample size provided.

First, we need to find the standard error (SE) for the sample:
SE = (standard deviation) / √(sample size) = 190 / √100 = 19 hours

Next, we need to find the z-score for the given average life (1,870 hours):
z = (sample mean - population mean) / SE = (1870 - 1850) / 19 ≈ 1.05

Finally, we use a z-table to find the probability associated with this z-score. For a z-score of 1.05, the probability is 0.8531, which represents the area to the left of the z-score. However, we need the probability to the right (more than 1,870 hours), so we subtract this value from 1:

Probability = 1 - 0.8531 ≈ 0.1469

Thus, the probability that a random sample of 100 bulbs will have an average life of more than 1,870 hours is approximately 14.69%.

To learn more about probability here:

brainly.com/question/30034780#

#SPJ11