Two monomials are shown below. 8x² 12x³ What is the least common multiple (LCM) of these monomials? 24x³ O24x6 96x³ 96x6
a
b
c
d
​

A. The probability of failing to detect a true risk ratio of 0.80 is known as the Type II error or beta error. It is calculated as 1 - power, which is 1 - 0.85 = 0.15 or 15%. This means that there is a 15% chance that the trial will fail to detect a true 20% relative reduction in sleep problems.

B. The probability of failing to detect a true risk ratio of 0.80 can be reduced by increasing the sample size or improving the study design. Increasing the sample size will increase the power of the study, which will decrease the probability of making a Type II error. Improving the study design can include selecting a more sensitive outcome measure, using a more effective treatment, or implementing stricter inclusion criteria.

C. To conduct a power-based sample size calculation, additional information is needed, such as the expected effect size, the variability of the outcome measure, the level of significance, and the desired power of the study.

D. Power and significance level are important factors in determining the sample size for designing a randomized controlled trial. A higher power will require a larger sample size, while a higher significance level will allow for a smaller sample size. The choice of sample size should balance the need for a precise estimate of the effect size with the practical limitations of time, resources, and feasibility.

learn more about  significance level

https://brainly.com/question/13947717

#SPJ11

The sine ratios for 30°–60°–90° are  1/4, √3/2 and undefined respectively

In a 30-60-90 triangle, the ratio of the sides opposite the angles 30°, 60°, and 90° are in the ratio of 1:√3:2, respectively.

Since the hypotenuse is given as 36, we can use this to find the lengths of the other two sides.

The side opposite the 60° angle is √3 times smaller than the hypotenuse, so it has a length of 18√3.

Now, we can use these side lengths to find the sine and cosine ratios for the angle θ = 60°.

The sine ratio is defined as the length of the side opposite the angle divided by the hypotenuse. So, in this case, the sine ratio for θ = 60° is:

sin(60°) = opposite/hypotenuse = (18√3)/36 = √3/2

cos(60°) = adjacent/hypotenuse = 18/36 = 1/2

The cosine ratio is defined as the length of the adjacent side divided by the hypotenuse. In this case, the side adjacent to the angle θ = 60° is the side opposite the angle θ = 30°, which has a length of 18. So, the cosine ratio for θ = 60° is:

sin(30°) = opposite/hypotenuse = (18/36) = 1/2

cos(30°)  = adjacent/hypotenuse = (18√3)/36 = √3/2

Learn more about sine ratio here:

https://brainly.com/question/2920412

#SPJ1

1 1/2 feet is equal to 18 inches after the conversion of units of measurement. The correct answer is B) .

One foot is equal to 12 inches. Therefore, to convert 18 inches to feet, we need to divide 18 by 12:

18 inches ÷ 12 inches/foot = 1.5 feet

Option A) 1 1/2 yards is not equal to 18 inches. One yard is equal to 36 inches, so 1 1/2 yards is equal to 54 inches, which is more than 18 inches.

Option C) 2 yards is equal to 72 inches, which is more than 18 inches.

Option D) 2 feet is equal to 24 inches, which is less than 18 inches.

Therefore, the correct answer is B) 1 1/2 feet.

To learn more about measurement click on,

https://brainly.com/question/24330014

#SPJ4

y = (1/4)e^(3x) + C/e^x this is the general solution to the given differential equation. It does not match any of the given options A through E.

To find the general solution to the differential equation dy/dx = e^(3x-y), we first rewrite it as a first-order linear differential equation. Divide both sides by e^(-y) to obtain:
dy/dx + y = e^(3x).
Now, we can solve this using an integrating factor. The integrating factor is given by the exponential of the integral of the coefficient of y with respect to x:
IF = e^(∫1 dx) = e^x.
Multiply the entire equation by the integrating factor:
(e^x)dy/dx + (e^x)y = e^(3x)e^x.
Now, the left side of the equation is the derivative of the product of y and the integrating factor (e^x):
d/dx(ye^x) = e^(4x).
Integrate both sides with respect to x:
∫d(ye^x) = ∫e^(4x) dx.
ye^x = (1/4)e^(4x) + C.
Finally, isolate y by dividing both sides by e^x:
y = (1/4)e^(3x) + C/e^x.
This is the general solution to the given differential equation. It does not match any of the given options A through E.

Learn more about  differential equations here: brainly.com/question/14620493

#SPJ11

The distance from the base of the telephone pole to point B is approximately 65 feet.

We can take care of this issue utilizing the Pythagorean hypothesis, which expresses that in a right triangle, the amount of the squares of the lengths of the two more limited sides is equivalent to the square of the length of the longest side (the hypotenuse).

Let's call the distance from point C to point B "x". Then we have:

AB² + BC² = AC² (using the Pythagorean theorem)

x² + 54² = 83²

x² = 83² - 54²

x² = 4225

x = √4225

x = 65

As a result, the distance between point B and the base of the telephone pole is approximately 65 feet, which has been rounded to the nearest tenth of a foot.

know more about triangle visit :

https://brainly.com/question/2773823

#SPJ1

Answer:

The answer is -4.4

Step-by-step explanation:

-7/10+15/100

(-70+15)/100÷125/1000

-55/100×1000/125

= -22/5= -4.4

The overinvolvement ratio for high study levels in high test scores over low test scores is 0.833 (rounded to three decimal places as requested).

The overinvolvement ratio is a measure of the association between two variables. In this case, we want to measure the association between high study levels and high test scores.

Let's define the following events:

A: the event that a student studies more than 25 hours per week.

B: the event that a student received high scores on tests.

Using this notation, we know that:

P(A|B) = 0.5 (50% of students who received high scores study more than 25 hours per week)

P(A|~B) = 0.7 (70% of students who received low scores study more than 25 hours per week)

The overinvolvement ratio is defined as the ratio of the conditional probabilities:

overinvolvement ratio = P(B|A) / P(B|~A)

We can use Bayes' theorem to calculate these probabilities:

P(B|A) = P(A|B) * P(B) / P(A)

P(B|~A) = P(~A|B) * P(B) / P(~A)

where P(B) is the probability that a student received high scores on tests, which we don't know.

However, we can use the law of total probability to calculate it:

P(B) = P(B|A) * P(A) + P(B|~A) * P(~A)

Substituting the values we know:

P(B) = (0.5 * 0.5) + (0.3 * 0.5) = 0.4

Now we can calculate the overinvolvement ratio:

overinvolvement ratio = P(B|A) / P(B|~A)

overinvolvement ratio = (0.5 * 0.4) / (0.3 * 0.6)

overinvolvement ratio = 0.833.

For similar question on probability

https://brainly.com/question/7965468

#SPJ11

1.Here, a is the value of the random variable Z that corresponds to the given probability of 0.0228. 2. If Z is the standard normal random variable, then P(1.00 < Z < 2.00) = 0.1359.

1. If Z is the standard normal random variable and P(Z > a) = 0.0228, then the value of a is approximately 2.00.

This means that there is a 2.28% probability that a random value from the standard normal distribution will be greater than 2.00.

2. If Z is the standard normal random variable, then P(1.00 < Z < 2.00) is the probability of the variable falling between 1.00 and 2.00.

To find this, you can subtract the cumulative probability for Z=1.00 from the cumulative probability for Z=2.00.

This value is approximately 0.1359, meaning there is a 13.59% probability that a random value from the standard normal distribution will fall between 1.00 and 2.00.

Visit here to learn more about Probability:

brainly.com/question/13604758

#SPJ11

Based on the information, these manufacturers have different mean times.

The following can be deduced based on the information:

sum of sq;treatment= 394.67

sum of sq; error= 44.00

mean sq;treatment= 197.33

mean square; error= 4.89

test statistic = 40.36

Pvalue is less than 0.01.

Fisher's (LSD) =(t)*(sp*√(1/ni+1/nj) =  3.54

since sample mean difference between 1 and 3 is greater than 3.54:

Based on this, the manufacturers have different mean times.

Learn more about mean on

https://brainly.com/question/1136789

#SPJ1

The coordinates of the centroid are:

([tex]\bar x , \bar y[/tex]) = ((3/8)π, (3/8)π)

To find the center of mass of the lamina, we need to find the coordinates of the centroid. Since the density at any point on the lamina is proportional to the square of its distance from the origin, we can use polar coordinates to simplify the calculation.

Let (r, θ) be the polar coordinates of a point on the lamina. Then the density at that point is proportional to [tex]r^2[/tex]. The mass of the lamina can be calculated by integrating the density over the lamina:

m = ∫∫[tex]r^2[/tex] dA

where dA is the differential area element in polar coordinates:

dA = r dr dθ

The limits of integration are 0 to 1 for r and 0 to π/2 for θ, since the lamina is a unit square in the first quadrant.

m = ∫[tex]0^{(\pi /2)[/tex] ∫[tex]0^1 r^4[/tex] dr dθ

= (1/5) ∫[tex]0^{(\pi /2)[/tex] 1 dθ

= π/10

The x-coordinate of the centroid is given by:

[tex]\bar x[/tex] = (1/m) ∫∫x[tex]r^2[/tex] dA

where x is the x-coordinate of a point on the lamina.

Using the fact that x = r cos(θ), we can write:

[tex]\bar x[/tex] = (1/m) ∫∫[tex]r^3[/tex]cos(θ) dASubstituting in the expression for dA in polar coordinates, we have:

[tex]\bar x[/tex] = ((1/m) ∫[tex]0^{(\pi /2)[/tex] ∫[tex]0^1 r^5[/tex]  cos(θ) dr dθ

Evaluating the integral, we get:

[tex]\bar x[/tex] = (3/8)π

Similarly, the y-coordinate of the centroid is given by:

[tex]\bar y[/tex]= (1/m) ∫∫y[tex]r^2[/tex]dA

where y is the y-coordinate of a point on the lamina.

Using the fact that y = r sin(θ), we can write:

[tex]\bar y[/tex]= (1/m) ∫∫[tex]r^3[/tex] sin(θ) dA

Substituting in the expression for dA in polar coordinates, we have:

[tex]\bar y[/tex]= (1/m) ∫[tex]0^{(\pi /2)[/tex] ∫[tex]0^1 r^5[/tex] sin(θ) dr dθ

Evaluating the integral, we get:

[tex]\bar y[/tex] = (3/8)π

for such more question on coordinates

https://brainly.com/question/23907194

#SPJ11

Question

A lamina takes the shape of a unit square (side length of 1) in the first quadrant with one corner at the origin. The density at any point on the lamina is proportional to the square of its distance from the origin: Find the center of mass of the lamina_

the only compound event among the given options is "selecting a blue or a green marble from a bag of blue, green, and red marbles."

How to solve the question?

A compound event is an event that involves two or more simple events. Among the events listed, the following are compound events:

Selecting a blue or a green marble from a bag of blue, green, and red marbles. This is a compound event because it involves two simple events, i.e., selecting a blue marble and selecting a green marble.

Rolling a die that lands on 5. This is not a compound event as it involves only one simple event, i.e., rolling a die and getting a specific outcome, i.e., 5.

Drawing a card that is a face card. This is not a compound event as it involves only one simple event, i.e., drawing a card and getting a specific outcome, i.e., a face card.

Flipping a coin that lands on heads. This is not a compound event as it involves only one simple event, i.e., flipping a coin and getting a specific outcome, i.e., heads.

Therefore, the only compound event among the given options is "selecting a blue or a green marble from a bag of blue, green, and red marbles."

To know more about probability visit :-

https://brainly.com/question/13604758

#SPJ1

As mining representative, the actions which can be taken to address citizen's concerns are through:

The primary concerns of the people would be the potential environmental impact of the mining activity, so, it is important to engage in open communication with them to address these concerns and inform them about steps being taken to minimize environmental impacts.

This can involve providing regular updates on environmental monitoring and management plans as well as holding public meetings to address concerns and answer questions.

The company will also implement measures to mitigate environmental impacts like using best available technologies to reduce emissions and waste, reclaiming and restoring mined land and minimizing water usage.

Read more about representative

brainly.com/question/25965873

#SPJ1

The volume of a rectangle is 9 [tex]units^3[/tex] if L = 1.2, W = 3, H = 2.5

The rectangular prism is a three-dimensional geometric figure. The product of all three dimensions is equal to its volume. If the dimensions are in the form of expression, then we have to multiply those three expressions and simplify it to find the expression for the volume of the rectangular prism.

We are given the dimensions of a rectangular prism, where the length is l = 1.2 the width is w = 3 and the height is , h = 2.5 We are asked to find the expression that represents the volume of the prism. Using the formula for the volume of a rectangular prism, we have

V = l × w × h

Plug all the values in above formula

V = 1.2 × 3 × 2.5

V = 9 [tex]units^3[/tex]

Learn more about Volume at

https://brainly.com/question/13798973

#SPJ4

a) The derivative of f(x) = -x² + 2x is f'(x) = -2x

b) The derivative of g(x) = x⁵ is g'(x) = 5x⁴.

(a) To find the derivative of f(x) = -x² + 2x, we use the definition of the derivative: f'(x) = lim(h->0) [f(x+h) - f(x)]/h. Plugging in the function, we get f'(x) = lim(h->0) [-(x+h)² + 2(x+h) + x² - 2x]/h. Expanding and simplifying, we get f'(x) = lim(h->0) [-2x - h]/h = -2x. Therefore, the derivative of f(x) is f'(x) = -2x.

(b) To find the derivative of g(x) = x⁵, we again use the definition of the derivative: g'(x) = lim(h->0) [g(x+h) - g(x)]/h. Plugging in the function, we get g'(x) = lim(h->0) [(x+h)⁵ - x⁵]/h.

Expanding using the binomial theorem, we get g'(x) = lim(h->0) [5x⁴h + 10x³h² + 10x²h³ + 5xh⁴ + h⁵]/h. Canceling out h and taking the limit, we get g'(x) = 5x⁴. Therefore, the derivative of g(x) is g'(x) = 5x⁴.

To know more about derivative click on below link:

https://brainly.com/question/25324584#

#SPJ11

The tangent point of line 2x+3y=-20 is (-7, -1).

To find the point of tangency, determine the intersection point of the line 2x + 3y = -20 and the circle centered at (-3, 4).

The point of tangency will lie on the line that is perpendicular to the tangent line and passes through the center of the circle.

The slope of the given line is -2/3, so the slope of the line that is perpendicular to it is 3/2:

y - 4 = (3/2)(x + 3)

y - 4 = (3/2)x + 9/2

y = (3/2)x + 17/2

Substitute this expression for y into the equation of the tangent line and solve for x:

2x + 3y = -20

2x + 3[(3/2)x + 17/2] = -20

2x + (9/2)x + 51/2 = -20

(13/2)x = -91/2

x = -7

Substituting this value of x into the equation of the line:

y = (3/2)x + 17/2 = (3/2)(-7) + 17/2 = -1

Therefore, the point of tangency is (-7, -1).

Find out more on tangent point here: https://brainly.com/question/4470346

#SPJ1

Based on the given p-value of 0.01 < p < 0.05 and assuming a significance level of a=0.05, we would fail to reject the null hypothesis and conclude that there is not a statistically significant difference between the two groups being compared.

This means that the observed difference between the two groups may be due to chance and not a true difference in the populations being studied.

If a=0.05, a p-value less than or equal to 0.05 would indicate statistical significance, meaning that we would reject the null hypothesis and conclude that there is a statistically significant difference between the two groups.

However, in this case, the p-value is given as 0.01 < p < 0.05, which means that the p-value is greater than 0.01 but less than 0.05. This indicates that the difference between the two groups may not be statistically significant at the 0.01 level, but it may still be statistically significant at the 0.05 level.

To learn more about significance level, refer:-

https://brainly.com/question/13947717

#SPJ11

Here, "Y" represents the dependent variable, "X" represents the independent variable, and "data" refers to the dataset containing both variables. The "+ 0" in the formula indicates that we are fitting a model without an intercept, i.e., Bo = 0.

(a) If Bo = 0, the regression function becomes Yi = B1Xi + εi. This means that the regression line passes through the origin (0,0). When plotted on a graph, the line would start at the origin and have a slope equal to B1, which represents the relationship between the dependent variable (Yi) and the independent variable (Xi).
(b) Under the assumption of Bo = 0, the least squares estimate of B1 can be derived using the formula B1 = Σ(Xi * Yi) / Σ(Xi^2). This is calculated by minimizing the sum of squared errors between the observed and predicted values of the dependent variable.
(c) Unfortunately, there is no "Im function" mentioned in your question. If you meant "lm function" in R, you can fit the model with Bo = 0 using the following code:
`model <- lm(Y ~ X + 0, data)`

Learn more about dependent variable here:

https://brainly.com/question/29430246

#SPJ11

The question is an example of theoretical probability, since it does not involve actually selecting marbles from the bag, while empirical probability is based on actual observations or experimental data.

Theoretical probability is the probability of an event based on mathematical analysis or reasoning, without actually performing an experiment or collecting data.

Here given question is an example of theoretical probability.

Theoretical probability is the probability of an event based on a theoretical or mathematical calculation, without actually performing an experiment or collecting data. In this case, we can calculate the probability of choosing a blue marble by dividing the number of blue marbles (8) by the total number of marbles;

the total number of marbles in the bag = 7 + 8 + 9 = 24

P(Blue) = 8/24 = 1/3

This calculation is based on theoretical probability, since it does not involve actually selecting marbles from the bag to determine the proportion of blue marbles. In contrast, empirical probability is based on actual observations or experimental data.

To know more about probability, visit:
https://brainly.com/question/13604758
#SPJ1

The probability that the random variable X has a value greater than 5.3 is 0.47 or 47%.

Since X is uniformly distributed between 0 and 10 with a density of 0.1, we know that the probability density function (PDF) is:

f(x) = 0.1,  0 < x < 10

To find the probability that X is greater than 5.3, we need to integrate the PDF from 5.3 to 10:

P(X > 5.3) = ∫[5.3,10] f(x) dx

          = ∫[5.3,10] 0.1 dx

          = 0.1 * ∫[5.3,10] dx

          = 0.1 * [x]_[5.3,10]

          = 0.1 * (10 - 5.3)

          = 0.47

Therefore, the probability that the random variable X has a value greater than 5.3 is 0.47 or 47%.

Learn more about variable X

https://brainly.com/question/31383724

#SPJ4

Answer:

With enough centrifugal force and outward thrust the rocket can exceed the pull of the vacuum no matter how strong it is.

Step-by-step explanation:

Answer:

Area is 102 meters squared

Step-by-step explanation:

A = a+b/2 (h)

a = 7

b = 10

h = 12

A = 7+10/2 (12)

A = 17/2 (12)

A = 17/2 x 12/1

A = 204/2

A = 102

V(X) = 10.00

Explanation: A fair 6-sided dice are rolled a number of times, and let X is the number of sixes. The mean value of X is given as 2. To calculate the variance V(X), we'll use the formula for the variance of a binomial distribution:

V(X) = np(1-p),

where n is the number of trials and p is the probability of success (rolling a six).
Since the mean value of X is 2, we can write it as np = 2. The probability of rolling a six on a fair 6-sided dice is p = 1/6. We can solve for n using the mean value:

n(1/6) = 2
n = 12

Now that we know n, we can calculate the variance:

V(X) = np(1-p) = 12(1/6)(1 - 1/6) = 12(1/6)(5/6) = 10

So, the variance V(X) is 10.00 (rounded to 2 decimal places).

Learn more about it here:

https://brainly.com/question/31581945

#SPJ11

Answer: The translation used to create the image is 2 units to the right and 2 units up.

Step-by-step explanation: To determine the translation used to create the image, you need to compare the original figure to the image on the graph. Look at the direction and distance that the figure moved. Then, describe the movement using the words "up", "down", "left", "right", and "units".

The image of the trapezoid after a dilation with a scale factor of 12 will have new coordinates K'(-72, 24), L' = (24, 24), M'(48, -48), N'(-96, -48).

A trapezoid is a four-sided polygon that has two parallel sides and two non-parallel sides, which are called the bases and legs respectively. The height of a trapezoid is the shortest distance between the two bases. To find the area of a trapezoid, you can use the formula A = [tex]\frac{ (b1 + b2)h}{2}[/tex] , where b1 and b2 are the lengths of the two bases and h is the height.

To find the image of the trapezoid after a dilation with a scale factor of 12, we need to multiply the coordinates of each vertex by 12.

The coordinates of the vertices are:

K(-6, 2)

L(2, 2)

M(4, -4)

N(-8, -4)

Multiplying each coordinate by 12, we get:

K': (12 × -6, 12 × 2) = (-72, 24)

L': (12 × 2, 12 × 2) = (24, 24)

M': (12 × 4, 12 × -4) = (48, -48)

N': (12 × -8, 12 × -4) = (-96, -48)

Plotting this we get the following graphs.

To know more about trapezoid visit:

brainly.com/question/11908553

#SPJ1

(a) To determine whether the data presents sufficient evidence to verify the manufacturer's claim, we can perform a one-sample t-test. The null and alternative hypotheses are:

H0: µ >= 80% (the mean potency of the antibiotic is at least 80%)

Ha: µ < 80% (the mean potency of the antibiotic is less than 80%)

The test statistic is calculated as:

t = (X - µ) / (s / sqrt(n))

where X is the sample mean, µ is the hypothesized population mean, s is the sample standard deviation, and n is the sample size.

Plugging in the values from the problem, we get:

t = (79.7 - 80) / (0.2 / sqrt(100)) = -2.5

Using a t-distribution table with 99 degrees of freedom and a significance level of 0.05, we find the critical value to be -1.660.

Since our calculated t-value (-2.5) is less than the critical value (-1.660), we reject the null hypothesis and conclude that there is sufficient evidence to support the claim that the mean potency of the antibiotic is less than 80%.

(b) The p-value for this test is the probability of obtaining a t-value as extreme as -2.5 (or more extreme) assuming that the null hypothesis is true. This is a one-tailed test, so the p-value is:

p-value = P(t < -2.5) = 0.007

Therefore, the p-value for this test is 0.007. Since the p-value is less than the significance level of 0.05, we reject the null hypothesis and conclude that there is sufficient evidence to support the claim that the mean potency of the antibiotic is less than 80%.

Learn more about t-distribution table here:

https://brainly.com/question/30401218

#SPJ11

The natural polymers are matched with their uses as;

Natural rubber; Option 2

Starch; Option 4

Silk; Option 5

DNA; Option 3

Cellulose; Option 1

Natural polymers are simply defined as materials that are wide spread in nature or are also extracted from plants or animals.

Different natural polymers like silk, DNA, cellulose, starch, natural rubber have their distinct uses.

Learn about natural polymers at: https://brainly.com/question/13939101

#SPJ1

It has proved that the equation [tex]e^{(x)} * (dy/dx) = y * e^{(x)} * (dy/dx)[/tex] is linear and the equation [tex](dy/dx) + x^2 * e^{(x)} * y = e^{(x)}[/tex] is not linear.

The equation [tex]e^{(x)} * (dy/dx) = y * e^{(x)} * (dy/dx)[/tex] is linear because it can be written in the standard form of a linear first-order ordinary differential equation, which is:
dy/dx + P(x) * y = Q(x)

In this case, we can divide both sides of the equation by [tex]e^{(x)}[/tex] to obtain:
dy/dx = y * (dy/dx)

Now, we can compare this to the standard form and observe that P(x) = 0 and Q(x) = y * (dy/dx).

Since the equation is in the standard form, it is linear.

On the other hand, the equation [tex](dy/dx) + x^2 * e^{(x)} * y = e^{(x)}[/tex] is not linear.

While it may seem similar to the standard linear form, the presence of the [tex]x^2 * e^{(x)} * y[/tex] term is what makes it non-linear.

In a linear equation, the term involving y should be of the form P(x) * y, where P(x) is a function of x only.

However, in this case, the term [tex]x^2 * e^{(x)} * y[/tex] involves both x and y, making the equation non-linear.

Learn more about linear equation:

https://brainly.com/question/2030026

#SPJ11

Mr. Kohl was hoping that 75% of NHS students recycle regularly. Since the poll shows a 73.56% recycling rate, it is slightly below his desired 75%. Therefore, Mr. Kohl might be somewhat disappointed, but it's still a reasonably high percentage of students recycling regularly.

Based on Luis's poll, 64 out of 87 students at NHS recycle regularly. To determine the percentage of students who recycle regularly, we can divide 64 by 87 and multiply by 100, which gives us approximately 73.56%.

Mr. Kohl was hoping that 75% of NHS students recycle regularly. Since the percentage from the poll falls slightly below this target, he may be a bit disappointed or sad. However, it is still a relatively high percentage and shows that a majority of students at NHS are taking steps to recycle regularly.
Based on the information provided, Luis' poll indicates that 64 out of 87 students at NHS recycle regularly. To determine the percentage of students who recycle, we can calculate:

(64/87) * 100 = 73.56%

Mr. Kohl was hoping that 75% of NHS students recycle regularly. Since the poll shows a 73.56% recycling rate, it is slightly below his desired 75%. Therefore, Mr. Kohl might be somewhat disappointed, but it's still a reasonably high percentage of students recycling regularly.

To learn more about percentage, click here:

brainly.com/question/24159063

#SPJ11

The car accelerates at a rate of 2.25 m/s² as it comes to a stop.

The rate at which an object's velocity changes is referred to as its "acceleration" in mathematics.

In other words, it is the rate of change in velocity with respect to time.

The units of acceleration in the International System of Units (SI) are often expressed in metres per second squared (m/s2).

The acceleration of a car refers to the rate at which its velocity changes.

The velocities are 9 m/s at the beginning and 0 m/s at the end.

The velocity change takes 4 seconds to complete.

Applying the equation provided below, we can determine the acceleration:

(Final velocity-Initial velocity)/Time=Acceleration

Substituting the values we have:

acceleration = (0-9 m/s) / 4 s

acceleration = -9 m/s / 4 s

acceleration = -2.25 m/s²

As expected for a slowing object, the negative sign shows that the acceleration is moving in the opposite direction of the initial velocity.

To know more about velocity visit:

brainly.com/question/28271337

#SPJ1