What happened in the isolated skeletal muscle when the maximal voltage was applied?

During a thunderstorm, it is safer to be in your car than standing under a tree on a golf course.

This is because lightning can strike tall objects such as trees and golf clubs, making you more susceptible to getting struck.

Being in a car, on the other hand, provides a safe shelter as long as you avoid touching any metal parts inside the vehicle. Remember, it is always best to seek shelter indoors during a thunderstorm.

To know more about thunderstorm here

https://brainly.com/question/12712011

#SPJ11

The electron orbits would be circular with a radius of

[tex]r = mv/( qB)[/tex],

where v is the initial speed of the electrons and q is the charge of the electron, and the direction of the electron orbits would be perpendicular to the magnetic field and in the plane perpendicular to the initial velocity of the electrons.

The motion of a charged particle in a magnetic field is given by the Lorentz force equation:

[tex]F = qvB sin(θ)[/tex]

where F is the force on the charged particle, q is the charge of the particle, v is the velocity of the particle, B is the magnetic field, and θ is the angle between the velocity of the particle and the magnetic field.

Since the force is perpendicular to the velocity, it causes the electrons to move in a circular path around the magnetic field. The radius of this circular path is given by:

[tex]r = mv/(qB)[/tex]

where m is the mass of the electron.

Therefore, the electron orbits would be circular with a radius of

[tex]r = mv/(qB),[/tex] where v is the initial speed of the electrons and q is the charge of the electron. The direction of the electron orbits would be perpendicular to the magnetic field and in the plane perpendicular to the initial velocity of the electrons.

for such more questions on initial speed

https://brainly.com/question/24493758

#SPJ11

Ultraviolet light is often used in microscopes because it has a shorter wavelength than visible light, which decreases the diffraction.

The short wavelength of UV light helps to improve the image resolution beyond the diffraction limit of optical microscopes using normal white light. The response of the sample to UV light is greater than that achieved by use of white light, in respect to the surroundings.This allows for improved resolution and better image quality when examining small details and structures.UV microscopy include better resolution, depth of focus, and contrast for certain materials and fewer artifacts when viewing multilayered structures.

Hence, the correct answer is option 4. It has shorter wavelength than visible light,which decreases the diffraction.

To learn more about diffraction https://brainly.com/question/2881162

#SPJ11

When a charged rod is brought near bits of uncharged paper, the paper will become polarized. This means that the positive charges in the paper will be attracted to the negatively charged rod, and the negative charges in the paper will be repelled by the rod.

                                   This will cause the bits of paper to move towards the rod and potentially stick to it, even though they are themselves uncharged. This is because the polarized charges in the paper are attracted to the opposite charges on the rod.

TO KNOW MORW ABOUT CHARGED ROD click this link -

brainly.com/question/28899014

#SPJ11

A force is applied for 23 ms to a 0.61 kg ball initially moving at 27 m/s in the positive x direction. The impulse has a magnitude of 45.9 N s, and the average magnitude of the force on the ball is approximately 2.00 kN.

We can use the impulse-momentum theorem to find the change in momentum of the ball during the time the force is applied

J = Δp = [tex]p_f[/tex] - [tex]p_i[/tex]

where J is the impulse, [tex]p_f[/tex] is the final momentum, and [tex]p_i[/tex] is the initial momentum. We know that the ball has an initial momentum of

[tex]p_i[/tex] = m*[tex]v_i[/tex] = 0.61 kg * 27 m/s = 16.47 kg m/s

We also know that the impulse has a magnitude of

J = Δp = [tex]p_f[/tex] - [tex]p_i[/tex] = 45.9 N s

Therefore, the final momentum of the ball is

[tex]p_f[/tex] = [tex]p_i[/tex] + J = 16.47 kg m/s - 45.9 N s = -29.43 kg m/s

The negative sign indicates that the ball is moving in the negative direction of the x axis after the force is applied.

We can find the average magnitude of the force by using the formula

[tex]F_{avg}[/tex] = J / Δt

where Δt is the time interval during which the impulse is applied. We know that the impulse has a magnitude of

J = 45.9 N s

And we are told that the applied force is

Δt = 23 ms = 0.023 s

Therefore, the average magnitude of the force is

[tex]F_{avg}[/tex] = J / Δt = 45.9 N s / 0.023 s ≈ 1996.96 N ≈ 2.00 kN

So the average magnitude of the force on the ball is approximately 2.00 kN.

To know more about force:

https://brainly.com/question/29181860

#SPJ4

If a bar magnet is held stationary next to a solenoid a current is generated in the magnet

A magnet is a material that can produce a magnetic field and attract certain materials, such as iron, steel, nickel and cobalt. Magnets have two poles, north and south, that attract opposite poles and repel like poles. Magnets have been used for centuries for a variety of purposes, such as navigation and medicine. Magnets can be natural, such as lodestones, or manufactured, such as ceramic magnets and rare earth magnets. Magnets come in a variety of shapes and sizes, including bar magnets, horseshoe magnets, disc magnets and cylinder magnets. Permanent magnets are made of materials that retain their magnetism, while temporary magnets can only be magnetized while in an external magnetic field. Magnets can be used to store data on floppy disks, hard drives and credit cards, and to generate electricity in generators and motors.

To learn more about magnet

https://brainly.com/question/14997726

#SPJ1

When the apple falls from the limb, its potential energy is converted into kinetic energy as it gains speed while falling towards the ground. Just before the apple hits the ground, its kinetic energy is at its maximum, while its potential energy is at its minimum.

The potential energy of an apple hanging from a limb is converted into other forms of energy as it falls and eventually hits the ground.

Just before the apple hits the ground, its potential energy has been converted mainly into kinetic energy due to its motion. This happens because as the apple falls, it gains speed, and the potential energy is gradually transformed into kinetic energy.

When the apple hits the ground, the kinetic energy is then transferred into other forms of energy, such as sound energy, heat energy, and deformation (or internal) energy within the apple as it impacts the ground and becomes slightly compressed or damaged.

To know more about Potential energy and Kinetic energy:

https://brainly.com/question/9349250

#SPJ11

A sawtooth wave is commonly used in subtractive synthesis as the source for a bowed string instrument because it closely resembles the harmonic content of a bowed string.

The sawtooth wave contains a rich set of overtones that are well-suited for creating the complex, expressive tones of a bowed string instrument. Additionally, the sawtooth wave's sharp rise and fall mimics the attack and decay of a bowed string, allowing for more realistic sound synthesis.

Finally, by applying a low-pass filter to the sawtooth wave, the higher harmonics can be gradually removed, creating the characteristic "mellow" sound of a bowed string instrument.

Learn more about sawtooth wave:

https://brainly.com/question/31131234

#SPJ11

Land rover ads used to claim that their vehicles could climb a slope of 45 Degrees.

Hence, the correct option is D.

We can use the following formula to calculate the minimum coefficient of static friction required for the Land Rover to climb a slope of 45 degrees.

tan θ = coefficient of static friction

Where θ is the angle of the slope.

For a slope of 45 degrees, we have

tan 45 = coefficient of static friction

By simplifying, we get

1 = coefficient of static friction

Hence, the minimum coefficient of static friction required for the Land Rover to climb a slope of 45 degrees is 1.0.

Hence, the correct option is D.

To know more about slope here

https://brainly.com/question/4286669

#SPJ4

Stars that are visible in the local sky on any clear night of the year, at any time of the night, are called circumpolar.

As one moves farther north or south from the equator, the position of the celestial equator in the sky shifts, and the angle between the celestial equator and the horizon changes. This means that some stars that are located near the celestial poles can remain above the horizon at all times, even as the Earth rotates.

For an observer located at a latitude of 90 degrees (the North or South Pole), all stars are circumpolar, and none of them will set below the horizon. For an observer located at a latitude of 30 degrees north, the stars that are within 30 degrees of the north celestial pole are circumpolar, while those within 30 degrees of the south celestial pole will never be visible from that location.

In the Northern Hemisphere, some well-known circumpolar stars include Polaris (also known as the North Star), which is located very close to the north celestial pole, and the stars of the Big Dipper, which circle around Polaris in a counterclockwise direction.

To learn more about stars, refer below:

https://brainly.com/question/31258649

#SPJ11

As you move quickly towards a speaker emitting a pure tone, the frequency of the sound you hear will appear to increase.

As you move quickly towards a speaker emitting a pure tone, the frequency of the sound you hear will appear to increase. This is known as the Doppler effect. The faster you move towards the source of the sound, the greater the increase in frequency. This effect is noticeable with any type of wave, including sound waves and light waves.

The other characteristics of the sound, such as its amplitude or intensity, will not change significantly as you move towards the speaker. However, as you get closer to the speaker, the sound may appear to be louder due to the decrease in distance between you and the source of the sound.

To know more about Doppler effect, refer

https://brainly.com/question/28106478

#SPJ1

When an ice cube floats in water, it displaces an amount of water equal to its own weight. Therefore, the correct answer is B.

As the ice cube melts, it transforms into liquid water, which occupies a smaller volume than the solid ice. This means that the melted water will take up less space than the ice cube did, resulting in a decrease in the overall volume of the system. As a result, the melted water will displace the same volume of water as the original ice cube, causing the water level to remain the same. The water level will stay the same. Therefore, the correct answer is B.

To know more about water level, here

https://brainly.com/question/17750427

#SPJ4

Microwaves have speeds equal to visible light. Hence option C is correct.

Visible light spectrum is nothing but the range of wavelength of radiation from 4000 angstrom to 7000 angstrom(Violet to Red). light is a energy packet. Every Photon having different wavelength travels with same velocity c (velocity of light). When we focus numbers of colors from visible spectrum to a point, that point appears as a white light. hence white light is composed of numbers of Colors in it.

Microwave is a electromagnetic wave and visible is also a electromagnetic wave hence both travels with speed of light.

Hence option C is correct.

To know more about Microwaves :

https://brainly.com/question/15708046

#SPJ4.

Power supplied to the lamp in Watts = 3.2 W,

The voltage that produces this current  = 578 V,

The resistance of the circuit in Ohms:  = 0.074 Ω

For question 31:

Using the formula P = I^2 * R, we can find the power supplied to the lamp:

[tex]P = (0.8 A)^2 * 5 \Omega = 3.2 W[/tex]

For question 32:

Using Ohm's Law, we can find the voltage:

V = I * R,

[tex]V = 7 A * (578 W / 7 A) = 578 V[/tex]

For question 33:

Using the formula P = V^2 / R, we can find the resistance of the circuit:

R = V^2 / P, where R is resistance in ohms, V is voltage in volts, and P is power in watts.

[tex]R = (2.1 V)^2 / 59 W = 0.074 \Omega[/tex]

To know more about Ohm's Law, here

brainly.com/question/1247379

#SPJ4

To calculate the kinetic energy of the ball we will use the equation KE = 1/2 * m * v^2.

The kinetic energy (KE) of an object is defined as the energy that it possesses due to its motion. It is given by the formula:

KE = 1/2 * m * v^2

where:

m is the mass of the object

v is the velocity of the object

To calculate the kinetic energy of a ball that is dropped and whose velocity is known at a certain time, we would use this formula by plugging in the values of the mass and velocity. For example, suppose that the mass of the ball is 0.2 kg and its velocity is 5 m/s at a certain time. Then the kinetic energy of the ball at that time would be:

KE = 1/2 * m * v^2

= 1/2 * (0.2 kg) * (5 m/s)^2

= 2.5 J

So, the kinetic energy of the ball at that time would be 2.5 joules.

Note that the kinetic energy of an object increases with its mass and the square of its velocity. This means that an object with a larger mass or a higher velocity will have greater kinetic energy than an object with a smaller mass or a lower velocity. Additionally, the kinetic energy of an object can be converted into other forms of energy, such as potential energy or heat, when it interacts with other objects or systems.

Therefore, the " KE = 1/2 * m * v^2 " this equation is used for calculating kinetic energy.

To learn more about kinetic energy click:

https://brainly.com/question/26472013

#SPJ4

Based on the given information, we can assume that Olaf is at rest before the collision with the ball. Therefore, the initial velocity (vi) of Olaf is 0 m/s.

Using the conservation of momentum principle, we can say that the momentum before the collision is equal to the momentum after the collision.
Initial momentum before the collision = Final momentum after the collision

Since Olaf is at rest before the collision, the initial momentum is 0.

Final momentum after the collision = (mass of Olaf) x (final velocity of Olaf)

The mass of Olaf is not given in the question, so we cannot solve for it. However, we can use the information given about the ball's velocity after the collision to find Olaf's final velocity.

The ball bounces off Olaf's chest horizontally at 7.10 m/s in the opposite direction. This means that the ball's velocity after the collision is -7.10 m/s.

Using the conservation of momentum principle:

Initial momentum = Final momentum
0 = (mass of Olaf) x (final velocity of Olaf) + (mass of ball) x (final velocity of ball)

We can assume that the mass of the ball is negligible compared to Olaf's mass, so we can simplify the equation to:

0 = (mass of Olaf) x (final velocity of Olaf) + 0
0 = (mass of Olaf) x (final velocity of Olaf)

Since the mass of Olaf is unknown, we cannot solve for it. However, we can solve for Olaf's final velocity:
(final velocity of Olaf) = 0 m/s

Therefore, Olaf's final velocity after the collision is 0 m/s.

To know more about conservation of momentum principle:

https://brainly.com/question/7958679

#SPJ11

When the temperature of a volume of water is reduced from 8°C to 4°C, its density increases. So the correct answer is: a. density increases

When the temperature of water is reduced from 8°C to 4°C, its density increases. This is because water reaches its maximum density at 4°C. As the temperature continues to decrease below 4°C, the density of water begins to decrease again. It is important to note that the water does not vaporize unless it is heated to its boiling point, which is 100°C at standard atmospheric pressure. When the temperature of a volume of water is reduced from 8°C to 4°C, its density increases. So the correct answer is: a. density increases

Learn more about density :

https://brainly.com/question/29775886

#SPJ11

The lowest resonance frequency of the outer ear tube is 1220 Hz.

The lowest resonance frequency of a cylindrical tube, such as the outer ear, can be calculated using the formula:

f = (c/2π) x (1/L)

where:

f is the frequency (in hertz)

c is the speed of sound in air (approximately 343 m/s at room temperature and normal atmospheric pressure)

L is the length of the tube (in meters)

In this case, the length of the outer ear tube is given as 3 cm, or 0.03 meters. The tube is closed at one end and open at the other, so we must take into account that the closed end is a node of the standing wave, and the open end is an antinode.

This means that the lowest resonance frequency, or fundamental frequency, of the tube will be the frequency at which a half-wavelength fits into the length of the tube. Therefore, the wavelength of the sound wave that will resonate in the tube is twice the length of the tube (since it has a closed end), or 0.06 meters.

Using the formula above, we can calculate the fundamental frequency as:

f = (343/2π) x (1/0.03) ≈ 1220 Hz

Therefore, the lowest resonance frequency of the outer ear tube is approximately 1220 Hz.

To learn about frequency click:

brainly.com/question/1292129

#SPJ4

[tex]\frac{d^2x}{dt^2} +\frac{k}{m} x=0[/tex] this equation describing the motion of an object undergoing simple harmonic motion, where angular period is T = 2π√(m/k).

Simple harmonic motion is a specific kind of periodic motion of a body that arises from a dynamic equilibrium between an inertial force that is proportional to the body's acceleration away from the static equilibrium position and a restoring force on the moving object that is directly proportional to the magnitude of the object's displacement and acts towards the object's equilibrium position. If friction or any other energy dissipation is not present, it leads to an oscillation that is represented by a sinusoid and that lasts indefinitely.

[tex]\frac{d^2x}{dt^2} +\frac{k}{m} x=0[/tex] this is differential equation for SHM.

where angular velocity ω = √(k/m)

∵ ω = 2π/T where T is period of SHM

2π/T = √(k/m)

T = 2π√(m/k)

To know more about SHM :

https://brainly.com/question/30404816

#SPJ4.

The breaking of chemical bonds can either absorb or release energy, depending on the type of chemical reaction. Some chemical reactions release energy when bonds are broken, while others absorb energy. So the correct answer is option: 4.

In exothermic reactions, the energy released by the breaking of chemical bonds is greater than the energy required to break the bonds. Therefore, the excess energy is released in the form of heat, light, or sound.

In endothermic reactions, the energy required to break the bonds is greater than the energy released. Therefore, energy must be absorbed from the surroundings in order to break the bonds. Correct option is 4.

To know more about chemical bonds, here

brainly.com/question/12907148

#SPJ4

--The complete Question is, The breaking of chemical bonds

1. releases energy.

2. Absorbs energy.

3. Neither absorbs nor releases energy.

4. Either absorbs or releases energy depending on the type of reaction --

The distance between two consecutive nodes in a wave is half the wavelength.

The distance between nodes is related to the wavelength in the following way:
The distance between two consecutive nodes in a wave is half the wavelength. This is because a node is a point where the wave has zero amplitude, and consecutive nodes are separated by one complete cycle of the wave, which is equal to half of the wavelength.

1. Identify the nodes in a wave, which are the points of zero amplitude.
2. Measure the distance between two consecutive nodes.
3. Multiply that distance by 2 to find the wavelength of the wave.

In summary, the distance between nodes is half the wavelength of the wave.

Learn more about "distance": https://brainly.com/question/26550516

#SPJ11

The amount of water held within the bales of cotton can be calculated using the concept of moisture content.

Moisture content is defined as the ratio of the mass of water to the mass of dry solids in a material. In this case, the dry solids refer to the cotton fibers.

The moisture content of the cotton can be determined using the following equation:

Moisture content = (Mass of water / Mass of dry solids) x 100%

At the end of the conditioning period, the cotton bales will have reached an equilibrium moisture content with the surrounding air in the warehouse, which has a relative humidity of 95%.

The equilibrium moisture content can be found using moisture equilibrium charts for cotton.

According to a moisture equilibrium chart for cotton at 95% relative humidity and 80°F, the equilibrium moisture content is approximately 8.5%.

Therefore, the moisture content of the cotton can be calculated as follows:

Moisture content = (8.5 / 100) = 0.085

The mass of dry solids in the 9 bales of cotton is given by:

Mass of dry solids = Number of bales x Weight of each bale

Mass of dry solids = 9 x 492 = 4,428 lb

To find the mass of water held within the cotton, we can rearrange the moisture content equation as follows:

Mass of water = Moisture content x Mass of dry solids

Mass of water = 0.085 x 4,428 = 376.38 lb

Therefore, the total mass of water held within the 9 bales of cotton at the end of the conditioning period is approximately 376.38 lb.

To know more about moisture content :

https://brainly.com/question/13768807

#SPJ11

When a color is absorbed in the visible region, it means that an object absorbs certain wavelengths of light within the visible spectrum (approximately 380 nm to 750 nm) and reflects or transmits the remaining wavelengths.

The color we perceive is the combination of the wavelengths that are not absorbed by the object. For example, if an object absorbs all wavelengths except for green, it will appear green to our eyes. This phenomenon occurs due to the interaction between light and the object's atoms or molecules, which can either absorb or reflect specific wavelengths depending on their electronic structure.

More on visible region: https://brainly.com/question/9356499

#SPJ11

B. Most (90% or more) of existing substances expand in size with an increase in temperature, based on the observation of thermal expansion.

The observation that materials expand in size with an increase in temperature can be applied to most (approximately 90% or more) of existing substances. This is because thermal expansion is a common property of materials due to the increased kinetic energy of particles as temperature rises. However, there are some exceptions where materials may contract or exhibit unique behaviors under specific conditions. The observation that materials expand in size with an increase in temperature can be applied to most (approximately 90% or more) of existing substances. The observation that materials expand in size with an increase in temperature can be applied to most (approximately 90% or more) of existing substances.

Learn more about thermal expansion:
https://brainly.com/question/30925006

#SPJ11

Option C is Correct. The assumption that is violated when a refracted sound wave is processed is that sound travels in a straight line. Refraction occurs when sound waves pass through a medium with varying densities, causing the path of the wave to bend. T

Means that the assumption that sound travels in a straight line is no longer valid when dealing with refracted sound waves.

The refractive index, also called the index of refraction, is a number that is determined by comparing the speeds of light in a vacuum with a medium with a higher density. The letter n or n' is most usually used to indicate the refractive index variable in mathematical computations and descriptive language.

We calculate the index of refraction of a material for sound waves as the ratio of the speed of sound in the material to the speed of sound in the air.

The sound waves are reflected back when a bat's sound waves strike an object.

For echolocation, bats used sound reflection to detect the location of adjacent objects.

They also utilise it to gauge an object's size and shape.

Echolocation is the process by which bats utilise sound to pinpoint their location.

The bat projects the location of its targets by picking up the reflected sound.

Learn more about Refraction here

https://brainly.com/question/30891558

#SPJ11

To calculate the amount of air that must be pushed downward to keep the helicopter aloft, we need to use the principle of conservation of momentum. The force exerted by the air on the helicopter (thrust) must be equal and opposite to the force exerted by the helicopter on the air (drag).

We can use the equation F = ma, where F is the force, m is the mass, and a is the acceleration. In this case, the force is the thrust, the mass is the mass of the air being pushed downward, and the acceleration is the velocity of the air being pushed downward.

Thrust = Drag = Weight of helicopter
Thrust = mass of air being pushed downward x acceleration of air being pushed downward
Weight of helicopter = mass of helicopter x gravitational acceleration

So, we can rearrange these equations to solve for the mass of air being pushed downward:

mass of air being pushed downward = Weight of helicopter / acceleration of air being pushed downward
mass of air being pushed downward = (mass of helicopter x gravitational acceleration) / (velocity of air being pushed downward)

Plugging in the given values, we get:
mass of air being pushed downward = (800 kg x 9.81 m/s^2) / (40.0 m/s)
mass of air being pushed downward = 19680 / 40
mass of air being pushed downward = 492 kg/s

However, we need to push the air downward with a force equal to the weight of the helicopter, so we need to divide the mass of air being pushed downward by the gravitational acceleration:

force of air being pushed downward = (mass of air being pushed downward x gravitational acceleration)
force of air being pushed downward = (492 kg/s x 9.81 m/s^2)
force of air being pushed downward = 4825 N

This is the force of the air being pushed downward. To convert it to mass flow rate, we need to divide by the velocity of the air being pushed downward:

mass flow rate of air being pushed downward = force of air being pushed downward / velocity of air being pushed downward

mass flow rate of air being pushed downward = 4825 N / 12 m/s
mass flow rate of air being pushed downward = 402.1 kg/s

Therefore, the answer is d. 392 kg/s, which is the closest option to the calculated value.

To know more about principle of conservation of momentum :

https://brainly.com/question/7958679

#SPJ11

The de Broglie wavelength of the electron in the ground state of hydrogen is approximately 3.31 × 10^-10 m.

We can use the de Broglie wavelength equation which relates the momentum of a particle to its wavelength:

λ = h/p

where λ is the de Broglie wavelength, h is Planck's constant, and p is the momentum of the particle.

The momentum of the electron can be found using the classical formula:

p = mv

where m is the mass of the electron and v is its velocity.

We have:

m = mass of electron = 9.1094 × 10^-31 kg

v = 2.2 × 10^-6 m/s

Using p = mv, we get:

p = (9.1094 × 10^-31 kg)(2.2 × 10^-6 m/s) = 2.00468 × 10^-36 kg m/s

Now, we can use the de Broglie wavelength equation to find λ:

λ = h/p = (6.626 × 10^-34 J s)/(2.00468 × 10^-36 kg m/s) ≈ 3.31 × 10^-10 m

Therefore, the de Broglie wavelength of the electron in the ground state of hydrogen is approximately 3.31 × 10^-10 m.

To learn more about de Broglie wavelength visit: https://brainly.com/question/17295250

#SPJ11

To determine the temperature of the kiln, we can use the concept of heat transfer, where the heat gained by water equals the heat lost by the copper block.

First, we find the heat gained by water:

Q = mcΔT

where Q is the heat transfer, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.

Q_water = m_water * c_water * ΔT_water

Where:
m_water = 300 g
c_water = 1.00 cal/g·°C
ΔT_water = (35°C - 15°C) = 20°C

Q_water = 300 g * 1.00 cal/g·°C * 20°C = 6000 cal

Now, we find the heat lost by the copper block:
Q_copper = m_copper * c_copper * ΔT_copper

Where:
m_copper = 120 g
c_copper = 0.10 cal/g·°C
ΔT_copper = (T_kiln - T_final_copper)

Since heat gained by water equals heat lost by copper:
Q_water = Q_copper

6000 cal = 120 g * 0.10 cal/g·°C * (T_kiln - 35°C)
6000 cal = 12 cal/°C * (T_kiln - 35°C)

Now, solve for T_kiln:
500 = T_kiln - 35°C
T_kiln = 535°C

The temperature of the kiln was 535°C (option d).

Learn more about heat transfer here:

https://brainly.com/question/13433948

#SPJ11

The three cardinal wave rules are:
Superposition

Reflection

Refraction

1. Superposition Principle: When two or more waves meet at a point, the resultant wave's displacement is the algebraic sum of the individual wave displacements at that point.

2. Reflection: When a wave encounters a boundary or obstacle, it bounces back, changing direction while maintaining its speed, wavelength, and frequency.

3. Refraction: When a wave passes from one medium to another, its speed changes, causing the wave to change direction. This bending of the wave is known as refraction, and it's governed by Snell's Law.

These rules help to describe the behavior of waves in various situations and are fundamental to understanding wave interactions and propagation.

To learn more about refraction, refer below:

https://brainly.com/question/14760207

#SPJ11