Before the child begins any outward radial movement, the angular momentum of the system of child and turntable is zero.
What is the angular momentum of the child-turntable system before any outward radial movement?
The conservation of angular momentum concept can be used to determine the angular momentum of the child and turntable system before the child begins any outward radial movement.
Assuming the turntable is initially at rest and the child is sitting at a distance R from the axis of rotation of the turntable, the angular momentum of the system is given by:
L = Iω
where L denotes angular momentum, I denotes moment of inertia, and denotes angular velocity.
Since the child is treated as a point mass, its moment of inertia can be approximated as:
Ichild = mchild × R^2
Since the turntable is initially at rest, its initial angular velocity is zero:
ωinitial = 0
As a result, the system's initial angular momentum is:
Linitial = Ichild × ωinitial = 0
As a result, the angular momentum of the child-turntable system is zero before the child begins any outward radial movement.
To learn more about angular momentum, visit: https://brainly.com/question/4126751
#SPJ1
Whats the energy of a 0. 051 kg tennis ball moving at 9. ,7 m/s
The kinetic energy of a 0.051 kg tennis ball moving at 9.7 m/s is approximately 2.409395 Joules.
The kinetic energy formula, which is provided by: can be used to determine the energy of a moving object,
Kinetic energy (KE) = 1/2× mass ×velocity²
where mass represents the object's weight in kilogrammes (kg) and velocity its speed in metres per second (m/s).
The tennis ball has a mass of 0.051 kg and a speed of 9.7 m/s, thus we can enter these numbers into the formula to determine its kinetic energy:
KE = 1/2 × 0.051 kg × (9.7 m/s)²
KE = 0.5 × 0.051 kg × 94.09 m²/s²
KE = 2.409395 J
So, the kinetic energy of a 0.051 kg tennis ball moving at 9.7 m/s would be approximately 2.409395 Joules.
To know more about tennis ball
https://brainly.com/question/15232620
#SPJ4
the potential energy of a mass spring system is shown in the figure above. for this mass-spring system, what is the spring constant?
The spring is stiffer and requires more force to stretch or compress, while a lower spring constant means that the spring is more flexible and requires less force.
The potential energy (PE) of a mass-spring system is given by:
PE = (1/2)kx^2
where k is the spring constant and x is the displacement of the mass from its equilibrium position.
To find the spring constant, we can rearrange the equation as follows:
k = (2PE) / x^2
To use this formula, you need to know the potential energy of the system at a specific displacement and the displacement itself. Once you have those values, you can plug them into the formula to find the spring constant.
Note that the spring constant represents the stiffness of the spring and is measured in units of force per unit length (e.g., N/m). It tells us how much force is required to stretch or compress the spring by a certain amount. A higher spring constant means that the spring is stiffer and requires more force to stretch or compress, while a lower spring constant means that the spring is more flexible and requires less force.
To learn more about equilibrium visit:
https://brainly.com/question/30694482
#SPJ11
if e is constant in magnitude over the surface of a charged conductor, does that mean the charge must be uniformly distributed over it?
Yes, if the electric field (e) is constant in magnitude over the surface of a charged conductor, then the charge must be uniformly distributed over it. This is because the electric field is directly proportional to the charge density, which is the amount of charge per unit area. If the electric field is constant, then the charge density must also be constant, resulting in a uniform distribution of charge over the conductor's surface.
The electric field at any point on the surface of a conductor is directly proportional to the surface charge density (σ) at that point, which is defined as the charge per unit area. Mathematically, we can express this relationship as E = σ / ε0, where ε0 is the electric constant.
If e is constant over the surface, then the surface charge density σ must also be constant. Therefore, the charge per unit area must be the same everywhere on the surface, which implies that the charge is uniformly distributed over the surface.
Learn more about conductors here:
https://brainly.com/question/24154868
#SPJ11
A 2.28 kg mass attached to an ideal spring oscillates with a 2.70 Hz frequency. Find the spring constant of the spring.
The spring constant of the spring is 32.63 Nm⁻¹.
Mass of the block, m = 2.28 kg
Frequency of oscillation, f = 2.7 Hz
Angular frequency of oscillation, ω = 2[tex]\pi[/tex]f
ω = 2 x 3.14 x 2.28
ω = 14.31
We know that,
ω² = k/m
Therefore, the spring constant,
k = mω²
k = 2.28 x 14.31
k = 32.63 Nm⁻¹
To learn more about spring constant, click:
https://brainly.com/question/14159361
#SPJ4
which has higher frequency, alpha waves or delta waves?
Delta waves have a lower frequency than alpha waves, as they oscillate at a slower rate.
Alpha waves and delta waves are two types of brainwaves that can be measured using an electroencephalogram (EEG) device.
Alpha waves are typically measured in the frequency range of 8 to 12 Hz (cycles per second) and are most commonly observed when a person is in a relaxed and calm state, such as during meditation or when closing their eyes and relaxing. They are also associated with a state of wakeful relaxation and can be seen when a person is daydreaming or engaged in creative activities.
Delta waves, on the other hand, are typically measured in the frequency range of 0.5 to 4 Hz and are the slowest brainwave frequency. They are commonly observed during deep sleep, and are also associated with other states of unconsciousness, such as during anesthesia or coma.
Therefore, delta waves have a lower frequency than alpha waves, as they oscillate at a slower rate. Alpha waves have a frequency of 8-12 Hz while delta waves have a frequency of 0.5-4 Hz.
To learn about frequency click:
https://brainly.com/question/1292129
#SPJ4
A CD originally at rest reaches an angular speed of 40. rad/s in 5.0 s.a) What is the magnitude of its angular acceleration?b) How many revolutions does the CD make in the 5.0 s?
a. 8.0 rad/s² is the magnitude of its angular acceleration. b. 31.83 revolutions does the CD make in the 5.0 s.
a) To find the magnitude of angular acceleration, we use the formula:
angular acceleration = (final angular speed - initial angular speed) / time
In this case, the initial angular speed is 0, the final angular speed is 40. rad/s, and the time is 5.0 s. So we have:
angular acceleration = (40. rad/s - 0) / 5.0 s
angular acceleration = 8.0 rad/s²
Therefore, the magnitude of the angular acceleration is 8.0 rad/s².
b) To find the number of revolutions the CD makes in 5.0 s, we first need to find the total angle the CD rotates through in that time. We can use the formula:
angle = angular speed x time
In this case, the angular speed is 40. rad/s and the time is 5.0 s. So we have:
angle = 40. rad/s x 5.0 s
angle = 200. rad
Since there are 2π radians in one revolution, we can convert the angle to revolutions using the formula:
revolutions = angle / (2π)
So we have:
revolutions = 200. rad / (2π)
revolutions ≈ 31.83
Therefore, the CD makes approximately 31.83 revolutions in 5.0 s.
Learn more about angular acceleration here
https://brainly.com/question/29428475
#SPJ11
a mass m is released from height h1 and then slides down a frictionless incline to a height h2. it then strikes a spring with spring constant k. at the moment the mass comes to a complete stop, what is the maximum compression of the spring?
Maximum compression of the spring is [tex]\sqrt{(2 * m * g * (h1 - h2)) / k}[/tex] when a mass m is released from height h1 and then slides down a frictionless incline to a height h2
To find the maximum compression of the spring when the mass comes to a complete stop, you can use conservation of energy principles. Initially, the mass has potential energy due to its height h1, which is converted into kinetic energy as it slides down the incline, and then into elastic potential energy as it compresses the spring.
The initial potential energy is given by:
[tex]PE_initial = m * g * (h1 - h2)[/tex]
As the mass reaches the spring, this potential energy is converted to kinetic energy:
[tex]KE = PE_initial[/tex]
When the mass compresses the spring, this kinetic energy is converted into elastic potential energy:
[tex]PE_spring = (1/2) * k * x^2[/tex]
At the moment the mass comes to a complete stop, the kinetic energy will be equal to the elastic potential energy:
[tex]KE = PE_spring[/tex]
Therefore, [tex]m * g * (h1 - h2) = (1/2) * k * x^2[/tex]
To find the maximum compression (x) of the spring, solve for x:
[tex]x=[/tex][tex]\sqrt{(2 * m * g * (h1 - h2)) / k}[/tex]
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ11
[Show student response to predict question] Does the duration of the latent period change with different stimulus voltages? How well did the results compare with your prediction?
No, the duration of the latent period does not change with different stimulus voltages as it is independent of the stimulus voltages.
The time elapsed between the delivery of a stimulus and the beginning of the muscle reaction is referred to as the latent period. The strength of the stimulus is one of many variables that might impact how long the latent period lasts.
Since a stronger stimulus might elicit a larger depolarization of the muscle fibre and so approach the threshold for muscular contraction more quickly, it will often result in a shorter latent period. On the other hand, a weaker stimulus can need a longer latent period to produce enough depolarization to meet the muscle contraction threshold.
To know more about the latent period, refer:
https://brainly.com/question/31414787
#SPJ4
Our brain uses the difference between the two sound signals received by our ears to localize sound sources or tell where a sound originated from. What difference do we use to localize LOW frequency sound sources?
Our brain uses the difference in phase between the two sound signals received by our ears to localize low frequency sound sources.
Step-by-step explanation:
1. Low frequency sounds have longer wavelengths and are less directional.
2. Our ears receive these low frequency sound signals.
3. The phase difference between the sound signals is the difference in arrival times at each ear.
4. Our brain processes this phase difference to determine the location of the sound source.
In summary, our brain uses the phase difference between the two sound signals received by our ears to localize low frequency sound sources.
To know more about sound signals and sources - https://brainly.com/question/31577791
#SPJ11
9. Suppose you are told that only two colors of light (X and Y) are sent through a glass prism and that X is bent more than Y. Which color travels more slowly in the prism?
The color X travels more slowly through the prism than Y.
Which color travels more slowly in prism?This is because the speed of light is dependent on the refractive index of the material it is passing through, which is related to the bending of the light.
In a prism, the degree of bending (refraction) depends on the wavelength of the light. Colors of light with shorter wavelengths (such as blue or violet) are refracted more than colors with longer wavelengths (such as red).
Since X is bent more than Y, it must have a shorter wavelength than Y. And since the speed of light is inversely proportional to its wavelength, the color X travels more slowly through the prism than Y.
Learn more about refractive index
brainly.com/question/23750645
#SPJ11
how does the amplitude/voltage relate to motor unit recruitment and force of muscle contraction?
The desired level of motor unit recruitment and force of muscle contraction without causing harm to the muscle tissue.
The amplitude or voltage of an electrical signal used to stimulate a muscle is a critical factor in determining the level of motor unit recruitment and the force of muscle contraction.
Motor units are groups of muscle fibers innervated by a single motor neuron. The number of motor units that are recruited during a muscle contraction determines the force generated by the muscle. When a small number of motor units are recruited, the force generated is relatively small. However, as more motor units are recruited, the force generated increases. The recruitment of motor units follows the "size principle", which states that smaller motor units are recruited first, followed by larger motor units as the force required increases.
The amplitude or voltage of an electrical signal applied to a muscle determines the number of motor units that are recruited. A low amplitude or voltage signal will only recruit a small number of motor units, resulting in a weak muscle contraction. As the amplitude or voltage of the signal increases, more motor units are recruited, resulting in a stronger muscle contraction.
However, there is a limit to the number of motor units that can be recruited by an electrical signal. Once all available motor units are recruited, further increases in amplitude or voltage will not produce any additional force. Additionally, excessively high amplitude or voltage signals can cause muscle damage and discomfort.
Therefore, the amplitude or voltage of an electrical signal used to stimulate a muscle must be carefully controlled to achieve the desired level of motor unit recruitment and force of muscle contraction without causing harm to the muscle tissue.
To learn more about contraction visit:
https://brainly.com/question/2669219
#SPJ11
13.40 Water flows through a 4.0 cm diameter horizontal pipe at a speed of 1.3 m/s. The pipe then narrows down to a diameter of 2.0 cm. Ignoring viscosity, what is the pressure difference between the wide and narrow sections of the pipe?A 850 paB 3400 paC 9300 paD 12,700 paE 13,500 pA
Answer: the pressure difference between the wide and narrow sections of the pipe is:
114,825 Pa - 101,325 Pa = 13,500 Pa
Explanation:We can use the Bernoulli's equation to solve this problem, which relates the pressure, velocity, and height of a fluid at two different points along a streamline. The equation is:
P1 + (1/2) * rho * v1^2 + rho * g * h1 = P2 + (1/2) * rho * v2^2 + rho * g * h2
where P1 and P2 are the pressures at the two points, v1 and v2 are the velocities at the two points, rho is the density of the fluid, g is the acceleration due to gravity, and h1 and h2 are the heights of the two points (which we can assume are the same in this problem, since the pipe is horizontal).
We can simplify the equation by assuming that the pipe is horizontal (so h1 = h2), and that the fluid is incompressible (so rho is constant). Then the equation becomes:
P1 + (1/2) * rho * v1^2 = P2 + (1/2) * rho * v2^2
We can use this simplified equation to solve for the pressure difference between the wide and narrow sections of the pipe. We'll assume that the wide section of the pipe has a diameter of 4.0 cm and the narrow section has a diameter of 2.0 cm. We can use the equation for the continuity of flow to relate the velocities at the two sections:
A1 * v1 = A2 * v2
where A1 and A2 are the cross-sectional areas of the two sections of the pipe (which we can calculate using the formula for the area of a circle: A = pi * r^2).
A1 = pi * (4.0 cm / 2)^2 = 12.57 cm^2
A2 = pi * (2.0 cm / 2)^2 = 3.14 cm^2
So we have:
12.57 cm^2 * 1.3 m/s = 3.14 cm^2 * v2
v2 = (12.57 cm^2 / 3.14 cm^2) * 1.3 m/s = 5.21 m/s
Now we can use the simplified Bernoulli's equation to solve for the pressure difference:
P1 + (1/2) * rho * v1^2 = P2 + (1/2) * rho * v2^2
We'll assume that the pressure at the wide section of the pipe is atmospheric pressure (which we can take to be 1 atm = 101,325 Pa), so P1 = 101,325 Pa. We'll also assume that the density of water is rho = 1000 kg/m^3.
101,325 Pa + (1/2) * 1000 kg/m^3 * (1.3 m/s)^2 = P2 + (1/2) * 1000 kg/m^3 * (5.21 m/s)^2
Simplifying and solving for P2, we get:
P2 = 101,325 Pa + (1/2) * 1000 kg/m^3 * (5.21 m/s)^2 - (1/2) * 1000 kg/m^3 * (1.3 m/s)^2
= 114,825 Pa
So the pressure difference between the wide and narrow sections of the pipe is:
114,825 Pa - 101,325 Pa = 13,500 Pa
Therefore, the answer is E) 13,500 Pa.
To learn more about diameter, refer below:
https://brainly.com/question/5501950
#SPJ11
a man of mass 70.0 kg is standing on the rim of a large disk that is rotating at 0.500 rev/s about an axis through its center. the disk has mass 120.0 kg and radius 4.00 m. calculate the total angular momentum of the man-plus-disk system
The sum of the separate components' angular momenta determines the overall angular momentum of the man-plus-disk system, which is
[tex]L_{total}=1520\ kg.m^{2/s}[/tex].
What is momentum?A measure of an object's resistance to changes in motion is called momentum. It is the result of the product of the mass and the velocity of an item, and it is equal to the mass times the velocity. Momentum is commonly denoted by the letter "p" and is a vector quantity, meaning it has both a magnitude and a direction. Because it is a conserved quantity, a system's overall momentum will remain constant both before and after a collision.
The sum of the angular momenta of a system's various components determines its overall angular momentum. The man and the disc are the two halves of this man-plus-disk system.
The man's angular momentum can be calculated as follows:
[tex]L_{man} = I_{man} * \omega[/tex]
where [tex]I_{man}[/tex] is the man's moment of inertia and is the disk's angular velocity.
It is possible to compute the man's moment of inertia as follows:
[tex]I_{man} = m*r^2[/tex]
where r is the disk's radius and m is the man's mass.
As a result, the man's angular momentum is:
[tex]L_{man} = (m * r^2) * \omega\\\\L_{man} = (70.0 kg * (4.00 m)^2) * (0.500 rev/s)\\\\L_{man} = 560 kg. m^{2/s}[/tex]
Calculations for the disk's angular momentum are as follows:
[tex]L_{disk} = I_{disk} * \omega[/tex]
where [tex]I_{disk}[/tex] is the disk's moment of inertia and is the disk's angular velocity.
You can determine the disk's moment of inertia by using the formula:
[tex]I_{disk} = (1/2) * m * r^2[/tex]
where r is the disk's radius and m is the disk's mass.
As a result, the disk's angular momentum is:
[tex]L_{disk} = (1/2) * (m * r^2) * \omega\\\\L_{disk} = (1/2) * (120.0 kg * (4.00 m)^2) * (0.500 rev/s)\\\\L_{disk} = 960 kg m^2/s[/tex]
The sum of the angular momenta of the separate parts of the man-plus-disk system determines the overall angular momentum, which is as follows:
[tex]L_{total} = L_{man} + L_{disk}\\\\L_{total} = 560 kgm^{2/s} + 960 kgm^{2/s}\\\\L_{total} = 1520 kgm^{2/s[/tex]
To learn more about momentum
brainly.com/question/1042017
#SPJ1
Find the total translational kinetic energy of
3 L of oxygen gas held at a temperature of
3◦C and a pressure of 2 atm.
Answer in units of J.
3 L of oxygen gas kept at 3 °C and 2 atm pressure has a total translation kinetic energy of 10 J.
How do you calculate the total kinetic energy of translation?By adding the two varieties of kinetic energy, it is possible to calculate the object's total kinetic energy. Remember that the product of the object's mass and the square of its linear velocity (around its centre of mass) and splitting the result by two gives the object's translational kinetic energy.
What is the gas molecules' translational kinetic energy at temperature T?Kinetic Translational Energy. No matter their mass, all gas molecules at a particular temperature have the same overall translational speed, according to the calculation.
To know more about kinetic energy visit :
https://brainly.com/question/26472013
#SPJ1
Once the radioactivity began to decline (at about 1250 s), how many seconds elapsed until ½ of the radioactive Protein X was lost from the cell?
To determine the time it took for half of the radioactive Protein X to be lost from the cell after the radioactivity began to decline (at about 1250 seconds), we need to find the half-life of the protein.
Step 1: Identify the initial time when radioactivity starts to decline, which is given as 1250 seconds.
Step 2: Assume that at this point (1250 seconds), the amount of radioactive Protein X is 100% (or any arbitrary value you want, the ratio will be the same).
Step 3: Calculate the time it takes for the radioactive Protein X to decrease by 50%. This means we want to find the time at which only 50% of Protein X is left in the cell.
Step 4: Identify the half-life of Protein X. This value is not provided in the question, so let's assume it as 't' seconds.
Step 5: At the end of one half-life, 50% of Protein X will be lost. So, in 't' seconds, the radioactive Protein X will be reduced by 50%.
So, once the radioactivity began to decline (at about 1250 seconds), 't' seconds elapsed until ½ of the radioactive Protein X was lost from the cell, where 't' represents the half-life of Protein X in seconds.
To know more about radioactivity:
https://brainly.com/question/1770619
#SPJ11
Take the location of particle 5 as the reference point for all angular momentum calculations when answering the following questions. Be sure to express your answer as a vector.
Consider all six particles as a system. What is the rotational momentum of the system? a. < 0 b. 0 c. -2*m*v*d > 0 0 -2 · m · vid
-2*m*v*d is the rotational momentum of the system.
Hence, the correct option is C.
We are taking the location of particle 5 as the reference point for all angular momentum calculations, the angular momentum of the system can be found by calculating the angular momentum of each particle about particle 5 and adding them.
Let the mass of each particle is "m", and their velocities are v1, v2, v3, v4, v5, and v6, respectively, and their positions relative to particle 5 are d1, d2, d3, d4, d5, and d6, respectively, the angular momentum of each particle about particle 5 can be calculated as
Where
L1 = m * (r1 x v1), where r1 = d1 - d5
L2 = m * (r2 x v2), where r2 = d2 - d5
L3 = m * (r3 x v3), where r3 = d3 - d5
L4 = m * (r4 x v4), where r4 = d4 - d5
L5 = 0, where r5 = d5-d5 = 0, since the reference point is particle 5
L6 = m * (r6 x v6), where r6 = d6 - d5
The total angular moment of the system is defined by the vector sum of these
L = L1 + L2 + L3 + L4 + L5 + L6
We didn't know the values of the velocities and position of the particle so, we can't determine the value of L. However, we can eliminate the option A and B.
Hence, the angular momentum of the system can't not be negative or zero as defined in specific direction.
Hence, the correct option is C.
To know more about rotational momentum here
https://brainly.com/question/29803113
#SPJ4
which property is detectable for both dark matter and the supermassive black hole at the center of the milky way?
The property that is detectable for both dark matter and the supermassive black hole at the center of the Milky Way is their gravitational influence on surrounding matter.
Both dark matter and the supermassive black hole affect the motion of nearby stars and galaxies due to their gravitational pull, even though they cannot be directly observed through electromagnetic radiation like visible light.
By studying the movement and behavior of objects in their vicinity, scientists can infer the presence and properties of both dark matter and the supermassive black hole.
Thus, the property is their gravitational influence on surrounding matter.
To know more about supermassive black hole click here:
https://brainly.com/question/16470114
#SPJ11
Is it possible for a car to circle a race track with constant velocity? Can it do so with constant speed?
Yes, it is possible for a car to circle a race track with constant speed. Constant speed means the car is covering equal distances in equal intervals of time. However, the car's direction will change as it moves around the track, so its velocity will not remain constant.
It is possible for a car to circle a race track with constant speed. Speed is a scaler quantity. As long as the car maintains the same direction while circling the track, it can have a constant speed. However, it is not possible for a car to circle a race track with constant velocity .Velocity is a vector quantity and it includes both speed and direction. As the car's direction will change as it moves around the track, so its velocity will not remain constant.
Learn more about velocity here:
https://brainly.com/question/17127206
#SPJ11
ompare the forces the water exerts on the bottoms of the tanks. is fa larger than, smaller than, or equal to fb ? explain.
The force exerted by water on the bottom of a tank depends on the depth of the water, the surface area of the bottom of the tank, and the density of the water.
If the depth and surface area of two tanks, A and B, are equal, but the density of the water in tank A is greater than the density of the water in tank B, the force exerted on the bottom of tank A will be greater than that on the bottom of tank B.
The reason for this is that the pressure at the bottom of each tank is directly proportional to the density of the fluid, and since the density of water in tank A is greater than that in tank B, the pressure at the bottom of tank A will be greater than that at the bottom of tank B.
On the other hand, if the densities of water in both tanks A and B are the same, but the depth of water in tank A is greater than the depth in tank B, the force exerted on the bottom of tank A will be greater than that on the bottom of tank B.
This is because the pressure at the bottom of each tank is directly proportional to the depth of the fluid, and since the depth of water in tank A is greater than that in tank B, the pressure at the bottom of tank A will be greater than that at the bottom of tank B.
Therefore, it is not possible to determine whether the force exerted on the bottom of tank A (fa) is greater than, less than, or equal to the force exerted on the bottom of tank B (fb) without more information about the specific conditions of the tanks, such as their depths and densities of water.
Read more about Forces.
https://brainly.com/question/13191643
#SPJ11
a converging lens has a focal length of 33.4 cm. an object is placed 17.4 cm in front of the lens. what is the location of the image?
The image is located 33.3 cm from the lens, on the opposite side from the object.
To answer this question, we need to use the thin lens equation, which relates the focal length (f), object distance ([tex]d_o[/tex]), and image distance ([tex]d_i[/tex]) of a lens. The equation is as follows:
[tex]=1/f = 1/d_o + 1/d_i[/tex]
In this case, we are given that the focal length of the converging lens is 33.4 cm and that the object is placed 17.4 cm in front of the lens. We can use these values to solve for the image distance:
[tex]1/33.4 = 1/17.4 + 1/d_i[/tex]
Simplifying this equation, we get:
[tex]1/d_i = 1/33.4 - 1/17.4\\\\1/d_i = 0.03\d_i = 33.3 cm[/tex]
Therefore, the image is located 33.3 cm from the lens, on the opposite side from the object. This result makes sense because the focal length is greater than the object distance, meaning the image will be further away from the lens than the object. Additionally, since the lens is converging, the image will be real and inverted.
For more such questions on image visit:
https://brainly.com/question/25209785
#SPJ11
Four positive point charges are arranged as shown in the accompanying diagram. The force between charges 1 and 3 is 6.0 N; the force between charges 2 and 3 is 5.0 N; and the force between charges 3 and 4 is 3.0 N. The magnitude of the total force on charge 3 is most nearly
(A) 6.3 N
(B) 8.0 N
(C) 10 N
(D) 11 N
(E) 14 N
Answer:
(A)6.3
Explanation:
Vector addition. Since all the charges are positive, the forces due to charges 2 and 4 point in opposite directions, making the magnitude of the net force along the x axis 2 N. Combine this with a net force along the y axis of 6 N using the Pythagoras thero.
Two satellites A and B of the same mass are going around earth in concentric orbits. The distance of satellite B from earth's center is twice that of satellite A. What is the ratio of the centripetal force acting on B compared to that acting on A?
To determine the ratio of the centripetal force acting on satellite B compared to that acting on satellite A, let's consider the given information and use the formula for centripetal force:
1. Both satellites have the same mass (m).
2. The distance of satellite B from Earth's center is twice that of satellite A (rB = 2rA).
The formula for centripetal force (Fc) is:
Fc = (G * m * M) / r^2
where G is the gravitational constant, m is the mass of the satellite, M is the mass of Earth, and r is the distance between the satellite and Earth's center.
For satellite A:
FcA = (G * m * M) / rA^2
For satellite B:
FcB = (G * m * M) / rB^2
Now we find the ratio of FcB to FcA:
FcB / FcA = [(G * m * M) / (2rA)^2] / [(G * m * M) / rA^2]
Since G, m, and M are constant, we can simplify this expression:
FcB / FcA = (rA^2) / (2rA)^2 = 1 / 2^2 = 1 / 4
The ratio of the centripetal force acting on satellite B compared to that acting on satellite A is 1:4.
To know more about The centripetal force:
https://brainly.com/question/14021112
#SPJ11
if you are in a car that is being pulled down a 56.0m path with a force of 12.5n what is the work done on the car
Answer: work done is: 700 J.
the formula of work done is : work=force × distance
here, the distance car being pulled is 56.0 m and the force applied on it is 12.5 n. so the work done to pulled a car id : = 12.5 × 56.0
=700.0 j.
At double the distance from a long current-carrying wire, the strength of the magnetic field producedby that wire decreases to :11(A) of its original value(B) of its original value84(C) of its original value(D) None of the above2
At double the distance from a long current-carrying wire, the strength of the magnetic field produced by that wire decreases to 1/4 of its original value. option (a)
This can be explained by the inverse square law of distance, which states that the strength of a field is inversely proportional to the square of the distance from the source of the field.
Mathematically, this can be expressed as [tex]B ∝ 1/r^2[/tex], where B is the magnetic field strength and r is the distance from the wire. Therefore, when the distance from the wire is doubled, r becomes 2r and the magnetic field strength becomes [tex](1/2r)^2[/tex] = 1/4 of its original value.
Learn more about magnetic field
https://brainly.com/question/14848188
#SPJ4
Step-by-Step on how to calculate 14N = 3.5 kg × 4 m/sec²?
The formula for calculating force is:
force = mass x acceleration
The force is 14 Newtons (N).
What is force?
Force is a physical quantity that describes the interaction between two objects, resulting in the acceleration of one or both objects. Force can cause a stationary object to move or change its direction, or it can alter the speed or direction of a moving object. Force is measured in the unit of Newtons (N) and is represented by the symbol F.
In this case, we have a mass of 3.5 kg and an acceleration of 4 m/sec². To find the force, we simply multiply the two values:
force = 3.5 kg x 4 m/sec²
To calculate this, we can use a calculator or do the multiplication by hand. Here's how to do it step-by-step:
Write down the values given in the problem:
mass = 3.5 kg
acceleration = 4 m/sec²
Write down the formula for force:
force = mass x acceleration
Substitute the values given in the problem into the formula:
force = 3.5 kg x 4 m/sec²
Multiply the two values:
force = 14 kg m/sec²
Simplify the unit by replacing kg m/sec² with Newtons (N), which is the unit of force:
force = 14 N
Therefore, the force is 14 Newtons (N).
To know more about force go to the given link;
brainly.com/question/12785175
#SPJ
the frictional force of the floor on a large suitcase is least when the suitcase is
The frictional force of the floor on a large suitcase is least when the suitcase is:
Your answer: The frictional force of the floor on a large suitcase is least when the suitcase is rolling on its wheels. his is because static friction, which is the force that keeps the suitcase from moving when it is at rest, is generally greater than kinetic friction, which is the force that opposes the motion of the suitcase when it is moving. Therefore, once the suitcase overcomes the static friction and begins to move, the frictional force of the floor on the suitcase decreases.
1. Understand the different types of friction: static friction, kinetic friction, and rolling friction.
2. Recognize that when a suitcase is rolling, it experiences rolling friction, which is typically less than static and kinetic friction.
3. Identify that when the suitcase is on its wheels, it is rolling and therefore experiencing the least amount of frictional force from the floor.
To know more about static friction and kinetic frcition:
https://brainly.com/question/30886698
#SPJ11
assuming the atmospheric pressure to be constant at 101,325 pa, by what amount does the volume of the balloon change?
The volume of the balloon is increased to 2.9 L.
Initial volume of the balloon, V₁ = 0.5 L
Initial temperature of the balloon, T₁ = 20°C = 293 K
Final temperature, T₂ = 150°C = 423 K
According to Charle's law,
V₁/T₁ = V₂/T₂
The final volume,
V₂ = (V₁/T₁)T₂
V₂ = 0.5 x 423/293
V₂ = 2.9 L
To learn more about Charle's law, click:
https://brainly.com/question/16927784
#SPJ4
Your question was incomplete, but most probably your question will be:
A balloon has a volume of 0.5 L at 20°C. If the balloon is heated to 150°C, assuming the atmospheric pressure to be constant at 101,325 pa, by what amount does the volume of the balloon change?
Suppose we drill a hole through the Earth along its diameter and drop a small mass m down the hole. Assume that the Earth is not rotating and has a uniform density throughout its volume. The Earth’s mass is ME and its radius is RE. Let r be the distance from the falling object to the center of the Earth.
a. Derive an expression for the gravitational force on the small mass as a function of r when it is moving inside the Earth.
b. Derive an expression for the gravitational force on the small mass as a function of r when it is outside the Earth.
d. Determine the work done by the gravity as the mass moves from the surface to the center.
e. Determine the speed of the mass at the center of the Earth if the Earth has a given density p
f. Determine the time it takes the mass to move from the surface to the center.
For the time it takes for the mass to move from the surface to the center, we get:
t = √(2
What is Work Done?
In physics, work is defined as the amount of energy transferred when a force is applied over a certain distance. Work done is the measure of the energy transferred when a force is exerted on an object and that object moves a certain distance as a result of that force.
At the center of the Earth, the gravitational force on the mass becomes zero because the mass is equally attracted in all directions. Therefore, at the center of the Earth, the kinetic energy of the mass is equal to the potential energy gained as it moves from the surface to the center. This can be expressed as:
(1/2) * m * [tex]v^{2}[/tex]= 2/3 * G * π * p * m * R[tex]E^{2}[/tex]
Solving for v, we get:
v = sqrt(8/9 * G * π * p * R[tex]E^{2}[/tex])
f. To determine the time it takes the mass to move from the surface to the center, we need to use the work-energy principle:
W = ΔK
where W is the work done by gravity, ΔK is the change in kinetic energy of the mass, and K is the kinetic energy.
The work done by gravity is given by the expression derived in part (d):
W = 2/3 * G * π * p * m * R[tex]E^{2}[/tex]
The change in kinetic energy is given by:
ΔK = (1/2) * m * [tex]v^{2}[/tex] - (1/2) * m
= (1/2) * m *[tex]v^{2}[/tex]
Substituting the expressions for W and ΔK, we get:
2/3 * G * π * p * m * R[tex]E^{2}[/tex] = (1/2) * m * [tex]v^{2}[/tex]
Solving for the time it takes for the mass to move from the surface to the center, we get:
t = √(2
Learn more about Work Done
https://brainly.com/question/25573309
#SPJ1
Which type of torque will decrease the angular velocity of a system?
It is usually caused by friction or air resistance and opposes the motion of the object.
To understand which type of torque will decrease the angular velocity of a system, we need to first understand the concept of torque and angular velocity.
Torque is the rotational equivalent of force. It is a measure of the force that causes an object to rotate around an axis or pivot point. Torque is calculated as the product of the force applied and the distance from the pivot point to the point where the force is applied.
Angular velocity is the rate of change of angular displacement of an object with respect to time. It is a measure of the speed at which an object is rotating around an axis.
Now, coming back to the question, the type of torque that will decrease the angular velocity of a system is called a "damping torque". Damping torque is a type of torque that opposes the motion of an object and slows it down. It is usually caused by friction or air resistance.
When a damping torque is applied to a rotating object, it causes a decrease in the angular velocity of the object. The amount of the decrease depends on the magnitude of the damping torque and the moment of inertia of the object.
In summary, a damping torque is the type of torque that will decrease the angular velocity of a system. It is usually caused by friction or air resistance and opposes the motion of the object.
To learn more about motion visit:
https://brainly.com/question/22810476
#SPJ11
10.28 A wrecking ball is suspended from a 5.0 m long cable that makes a 30 degree angle with the vertical. The ball is released and swings down. What is the ball's speed at the lowest point?A 7.7 m/s B 4.4 m/sC 3.6 m/sD 3.1 m/s
To find the wrecking ball's speed at the lowest point which is suspended from a 5.0 m long cable that makes a 30 degree angle with the vertical. The ball is released and swings down.
To solve this problem, we can use conservation of energy. At the highest point, all of the ball's energy is potential energy (PE=mgh), where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the ball above its lowest point. At the lowest point, all of the ball's energy is kinetic energy (KE=1/2mv^2), where v is the speed of the ball.
Since energy is conserved, we can set the initial potential energy equal to the final kinetic energy:
mgh = 1/2mv^2
We can cancel out the mass m from both sides, and solve for v:
v = sqrt(2gh)
To find h, we need to use trigonometry to find the height of the lowest point above the ground. The horizontal distance from the point where the ball is released to the point where it reaches its lowest point is given by:
5.0 m * sin(30 degrees) = 2.5 m
The vertical distance from the release point to the lowest point is given by:
5.0 m * cos(30 degrees) = 4.3 m
Therefore, the total height of the lowest point above the ground is:
h = 4.3 m - 0.5 m = 3.8 m
(where we subtract 0.5 m because the ball has a radius of 0.5 m)
Now we can plug in the values for g and h and solve for v:
v = sqrt(2 * 9.81 m/s^2 * 3.8 m) = 3.1 m/s
Therefore, the answer is D) 3.1 m/s.
