The deBroglie wavelength (in nm) of a neutron (m = 1.67*[tex]10^{-27[/tex] kg) moving with a speed of 24 m/s is 165 nm.
The de Broglie wavelength (λ) represents the wave-like behavior of particles and is particularly important in quantum mechanics. It can be calculated using the de Broglie equation:
λ = h / (m*v)
where λ is the de Broglie wavelength, h is the Planck constant (6.626 * [tex]10^{-34[/tex] Js), m is the mass of the particle, and v is its velocity.
In this case, we are given the mass of a neutron (m = 1.67 * [tex]10^{-27[/tex] kg) and its speed (v = 24 m/s). Plugging these values into the de Broglie equation, we get:
λ = (6.626 * [tex]10^{-34[/tex] Js) / ((1.67 * [tex]10^{-27[/tex] kg) * (24 m/s))
After performing the calculation, we find that the de Broglie wavelength is approximately 1.65 * [tex]10^{-10[/tex] meters. To convert this value to nanometers, we multiply by [tex]10^9[/tex] (since 1 meter equals [tex]10^9[/tex] nanometers):
λ ≈ 1.65 * [tex]10^{-10[/tex] meters * [tex]10^9[/tex] nm/meter = 165 nm
Thus, the de Broglie wavelength of a neutron moving at 24 m/s is approximately 165 nm. This demonstrates the wave-particle duality nature of subatomic particles, as the neutron exhibits both particle-like properties (mass and velocity) and wave-like properties (wavelength).
For more such questions on deBroglie wavelength.
https://brainly.com/question/13095392#
#SPJ11
Return now to the flywheel of part (a), with mass m1, radius r1, and speed v at its rim. Imagine the flywheel delivers one third of its stored kinetic energy to car, initially at rest, leaving it with a speed vcar. Enter an expression for the mass of the car, in terms of the quantities defined here
The mass of the car in terms of the given quantities is: mcar = (1/3) * m1 * (v^2 / vcar^2)
We found the kinetic energy of the flywheel to be:
K = (1/2) * m1 * v^2
If one third of this kinetic energy is transferred to car, then kinetic energy of car can be expressed as:
Kcar = (1/3) * K = (1/3) * (1/2) * m1 * v^2 = (1/6) * m1 * v^2
The kinetic energy of the car can also be expressed in terms of its mass and speed as:
Kcar = (1/2) * mcar * vcar^2
Setting these two expressions for Kcar equal to each other and solving for mcar, we get:
(1/6) * m1 * v^2 = (1/2) * mcar * vcar^2
mcar = (1/3) * m1 * (v^2 / vcar^2)
To know more about kinetic energy, here
brainly.com/question/26472013
#SPJ4
A planet orbits the sun in an elliptical path, with the furthest distance from the sun (aphelion) of 70x10^9m and the closest distance (perihelion) of 46 x 10^9 m. If the planet is traveling 39 km/s at aphelion, how fast is it traveling at perihelion?
The planet is traveling at 59.7 km/s at perihelion.
How fast is it traveling at perihelion?The planet's speed at perihelion can be calculated using the conservation of angular momentum.
Since the planet is traveling in an elliptical path, its angular momentum must remain constant. This means that the product of its mass, velocity, and distance from the sun must remain constant.
At aphelion, the planet's velocity is 39 km/s and its distance from the sun is 70 x 10⁹m. Using the conservation of angular momentum, we can write:
m * v_aphelion * d_aphelion = m * v_perihelion * d_perihelion
where m is the mass of the planet, v_aphelion is the velocity at aphelion, d_aphelion is the distance from the sun at aphelion, v_perihelion is the velocity at perihelion, and d_perihelion is the distance from the sun at perihelion.
Solving for v_perihelion, we get:
v_perihelion = (v_aphelion * d_aphelion) / d_perihelion
Plugging in the given values, we get:
v_perihelion = (39 km/s * 70 x 10⁹ m) / (46 x 10⁹ m)
v_perihelion = 59.7 km/s (rounded to two decimal places)
Therefore, At perihelion, the planet is moving at a speed of 59.7 km/s.
Learn more about perihelion.
brainly.com/question/17392860
#SPJ11
the coldest temperature ever recorded in the us was -62.1 c (-78.9 f) what was the speed of the nitrogen molecules in the air that day
To find the speed of nitrogen molecules in the air at the coldest temperature ever recorded in the US, which was -62.1°C (-78.9°F), we can use the formula for root-mean-square (rms) speed of gas molecules:
v_rms = sqrt(3 * R * T / M)
where:
- v_rms is the root-mean-square speed
- R is the universal gas constant (8.314 J/mol·K)
- T is the temperature in Kelvin (convert from Celsius)
- M is the molar mass of nitrogen gas (N₂, approximately 28.0134 g/mol, which needs to be converted to kg/mol)
Step 1: Convert the temperature to Kelvin
T = -62.1°C + 273.15 = 211.05 K
Step 2: Convert the molar mass of nitrogen to kg/mol
M = 28.0134 g/mol * (1 kg/1000 g) = 0.0280134 kg/mol
Step 3: Calculate the rms speed of nitrogen molecules
v_rms = sqrt(3 * 8.314 * 211.05 / 0.0280134) ≈ 509.65 m/s
So, the speed of nitrogen molecules in the air that day was approximately 509.65 m/s.
To know more about speed of nitrogen molecules:
https://brainly.com/question/13873043
#SPJ11
Answer: 433.331653
T = -62.1 + 273 = 210.9
MM = 0.0280 = 0.028
V = sqrt((3*8.31*T)/(MM)) = 433.331653
T/F If a body starts with zero velocity and ends with zero velocity, then the area under the positive acceleration curve must be equal to the area under the negative acceleration curve
The given statement, "If a body starts with zero velocity and ends with zero velocity, then the area under the positive acceleration curve must be equal to the area under the negative acceleration curve," is True. This is because positive acceleration causes an increase in velocity, while negative acceleration causes a decrease in velocity.
In order for the body to return to zero velocity, the total change in velocity due to positive acceleration must be canceled out by the total change in velocity due to negative acceleration, meaning that the areas under both curves must be equal.
The area under the positive acceleration curve represents the increase in velocity during the displacement, while the area under the negative acceleration curve represents the decrease in velocity during the return to the original position. Since the body ends with zero velocity, the areas under both curves must be equal in magnitude and opposite in sign, resulting in a net area of zero.
Learn more about acceleration here:
https://brainly.com/question/460763
#SPJ11
T/F If you increase the time over which a torque is applied, you can decrease the magnitude of the torque and get the same change in angular momentum
The torque and still get the same change in angular momentum, according to the principle of conservation of angular momentum. the torque and get the same change in angular momentum Δθ = J / I.
True. The principle of conservation of angular momentum states that the total angular momentum of a system remains constant if no external torque acts on it. This means that if a torque is applied to a system, the system will experience a change in its angular momentum.
The magnitude of the change in angular momentum depends on both the magnitude of the torque and the duration of the torque application. If a larger torque is applied for a shorter time, the change in angular momentum will be the same as if a smaller torque were applied for a longer time.
To see why this is true, we can use the formula for torque:
τ = Iα
where τ is the torque, I is the moment of inertia of the object being rotated, and α is the angular acceleration. Rearranging this equation, we can solve for the angular acceleration:
α = τ / I
Now, if we integrate both sides of the equation with respect to time, we get:
Δθ = ∫(α dt) = ∫(τ / I) dt
where Δθ is the change in angular displacement. If we assume that the moment of inertia of the object remains constant during the torque application, we can take it out of the integral:
Δθ = (1 / I) ∫τ dt
The integral on the right-hand side represents the impulse of the torque, which is equal to the product of the torque and the duration of the torque application:
J = ∫τ dt
Therefore, we can rewrite the equation as:
Δθ = J / I
This equation shows that the change in angular displacement is proportional to the impulse of the torque and inversely proportional to the moment of inertia of the object.
From this equation, we can see that if we increase the duration of the torque application, we can decrease the magnitude of the torque and still get the same change in angular displacement. This is because the product of the torque and the duration of the torque application remains the same, and therefore the impulse of the torque remains constant.
In summary, the magnitude of the change in angular momentum depends on both the magnitude of the torque and the duration of the torque application. If you increase the time over which a torque is applied, you can decrease the magnitude of the torque and still get the same change in angular momentum, according to the principle of conservation of angular momentum.
To learn more about magnitude visit:
https://brainly.com/question/15681399
#SPJ11
(D) The potential energy of a particle at a location is the potential at that location times the charge.
In this case, the potential is kQ/d + kQ/d = (2kQ/d)
The figure above shows two particles, each with a charge of +Q, that are located at the opposite corners of a square of side d.
What is the potential energy of a particle of charge +q that is held at point P ?
For the two charges with charge +Q placed at opposite corners of the square, the potential at the point p is determined as (2kQ) / d V.
The electric potential is the work done in bringing the unit positive charge from one point to another. It equals the charge and distance between the charges. The potential is directly proportional to the charges and inversely proportional to the distance of separation of charges.
The potential is defined as, V = kQ/ r. In a square at a point p, the potential due to charge Q₁ is V₁ = kQ / d (where d is the side length of the square) and due to charge Q₂ is V₂ = kQ / d.
The net electric potential is,
V = V₁ + V₂
= (kQ / d) + (kQ / d)
= 2 (kQ/d)
The potential at a point p in a square is V = 2 (kQ/d) V.
Learn more about the electric potential :
https://brainly.com/question/15058920
#SPJ4
write the dynamic equations and find the transfer functions for the circuits shown passive lead circuit active lead circuit
The transfer function for the passive lead circuit can be derived as H(s) = V_C(s)/V_in(s) = (sRC + 1)/(sRC), and the transfer function for the active lead circuit can be derived as H(s) = V_C(s)/V_in(s) = -R_f/(1+sR_fC).
A passive lead circuit is an electrical circuit that uses a resistor and a capacitor to introduce a phase shift in a signal, causing the output signal to lead the input signal in phase. It is called "passive" because it does not require an external power source to function.
An active lead circuit is an electrical circuit that uses an operational amplifier (op-amp) to introduce a phase shift in a signal, causing the output signal to lead the input signal in phase. It is called "active" because it requires an external power source to function, typically from the power supply connected to the op-amp.
Assuming you are referring to electrical circuits, here are the dynamic equations and transfer functions for the passive and active lead circuits:
Passive Lead Circuit:
The dynamic equation for a passive lead circuit can be written using Kirchhoff's voltage law (KVL) and Ohm's law:
V_in = V_R + V_C
where:
V_in = input voltage
V_R = voltage across the resistor
V_C = voltage across the capacitor
Using the resistor and capacitor values, the transfer function for the passive lead circuit can be derived as:
H(s) = V_C(s)/V_in(s) = (sRC + 1)/(sRC)
Active Lead Circuit:
The dynamic equation for an active lead circuit can be written using the op-amp gain equation and KVL:
V_in - V_x = V_R
V_x - V_out = V_C
where:
V_x = voltage at the non-inverting input of the op-amp
Using the resistor and capacitor values, the transfer function for the active lead circuit can be derived as:
H(s) = V_C(s)/V_in(s) = -R_f/(1+sR_fC)
where:
R_f = feedback resistor value
Note that the negative sign in the transfer function comes from the fact that the output voltage is 180 degrees out of phase with the input voltage in an active lead circuit.
Hence, It is possible to derive the transfer function for the passive lead circuit as H(s) = V_C(s)/V_in(s) = (sRC + 1)/(sRC), and It is possible to derive the transfer function for the active lead circuit as H(s) = V_C(s)/V_in(s) = -R_f/(1+sR_fC).
To learn more about Kirchoff's law click:
https://brainly.com/question/86531
#SPJ4
(B) E is uniform between charged parallel plates therefore the force on a charge is also uniform
between the platesâº
Two large parallel conducting plates P and Q are connected to a battery of emf E, as shown above. A test charge is placed successively at points I, II, and III. If edge effects are negligible, the force on the charge
when it is at point III is
(A) of equal magnitude and in the same direction as the force on the charge when it is at point I
(B) of equal magnitude and in the same direction as the force on the charge when it is at point II
(C) equal in magnitude to the force on the charge when it is at point I, but in the opposite direction
(D) much greater in magnitude than the force on the charge when it is at point II, but in the same direction
(E) much less in magnitude than the force on the charge when it is at point II, but in the same direction
A test charge is placed successively at points I, II, and III. If edge effects are negligible, the force on the charge when it is at point III is of equal magnitude and in the same direction as the force on the charge when it is at point II. hence option B is correct.
Electric charge is the physical property of matter that experiences force when it is placed in electric field. F = qE where q is amount of charge, E = electric field and F = is force experienced by the charge. there are two types of charges, positive charge and negative charge which are generally carried by proton and electron resp. like charges repel each other and unlike charges attract each other. the flow charges is called as current. Elementary charge is amount of charge a electron is having, whose value is 1.602 x 10⁻¹⁹ C
hence the force F acting on the charge when it is in between two plates is,
F = qE
which do not depends on the distance from the plate inside the plates.
Hence option B is correct.
To know more about charge :
https://brainly.com/question/19886264
#SPJ4.
If a negative charge is moved in the same direction as the electric field lines in some region of space, how does the potential energy of the negative charge change?
If a negative charge is moved in the same direction as the electric field lines in some region of space, its potential energy will decrease.
This is because the negative charge is moving towards an area of lower potential energy.
In other words, the negative charge is moving towards an area where there is less electrical potential energy per unit charge.
As the negative charge moves closer to the source of the electric field, its potential energy will continue to decrease.
To know more about electric field lines here
https://brainly.com/question/14438235
#SPJ11
In simple harmonic motion, when is the magnitude of the acceleration the greatest? (There could be more than one correct choice.)
Check all that apply.
when the displacement is a zero
when the speed is a maximum
when the kinetic energy is a minimum
when the potential energy is a maximum
when the magnitude of the displacement is a maximum
In simple harmonic motion, the magnitude of the acceleration is the greatest when the following conditions apply:
- When the magnitude of the displacement is a maximum
- When the potential energy is a maximum
In simple harmonic motion, the acceleration of an object is directly proportional to its displacement from the equilibrium position and acts towards the equilibrium position. Thus, the magnitude of acceleration is greatest when the displacement is maximum.
This can be seen from the equation of motion for simple harmonic motion: a = -ω^2 x, where a is the acceleration, x is the displacement from the equilibrium position, and ω is the angular frequency of the motion. As the displacement increases, the magnitude of the acceleration also increases.
On the other hand, the speed is maximum and the kinetic energy is minimum at the equilibrium position, where the displacement is zero. The potential energy is maximum at the maximum displacement from the equilibrium position, where the magnitude of the acceleration is also maximum.
Learn more about simple harmonic motion at: https://brainly.com/question/26114128
#SPJ11
True or False:
Side lobe, grating lobe, & refraction artifacts all reduce lateral resolution.
True. Side lobe, grating lobe, and refraction artifacts all contribute to the reduction of lateral resolution in imaging systems.
Side lobes and grating lobes are artifacts that can occur in ultrasound imaging when the ultrasound beam is not perfectly focused. These artifacts create additional, weaker beams of ultrasound that can interfere with the main beam and reduce the lateral resolution of the image. Refraction artifacts can also occur when the ultrasound beam passes through tissue with different acoustic properties, causing the beam to bend and create distortion in the image. All of these artifacts can contribute to a decrease in lateral resolution.
Learn more about refraction here: https://brainly.com/question/2660868
#SPJ11
A 6.00 kg block is placed on a 30.0° incline and connected to another block on a 36.87° incline. Although the surfaces are frictionless the blocks do not move. What is the mass in kilograms of the block on the 36.87° incline?
1) 1.80
2) 3.00
3) 4.00
4) 5.00
5) 6.00
The mass of the block on the 36.87° incline is 4.00 kg, which corresponds to option 3.
To solve this problem, we need to consider the forces acting on each block and set up an equilibrium condition. Since the blocks are not moving, the forces on both inclines must be equal and opposite.
We can use the formula for gravitational force: F = mg, where F is the force, m is the mass, and g is the acceleration due to gravity (approximately 9.81 m/s²).
For the 6.00 kg block on the 30.0° incline, the force acting perpendicular to the incline is F1 = (6.00 kg)(9.81 m/s²)sin(30.0°).
For the unknown mass block on the 36.87° incline, let its mass be M. The force acting perpendicular to the incline is F2 = (M)(9.81 m/s²)sin(36.87°).
Since the blocks are in equilibrium, F1 = F2.
(6.00 kg)(9.81 m/s²)sin(30.0°) = (M)(9.81 m/s²)sin(36.87°)
Solving for M, we find that M ≈ 4.00 kg. Therefore, the mass of the block on the 36.87° incline is 4.00 kg, which corresponds to option 3.
To learn more about mass, refer below:
https://brainly.com/question/15959704
#SPJ11
Imagine that you could travel at the speed of light. Starting from Earth, about how long would it take you to travel to the center of the Milky Way Galaxy? 28,000 years 50,000 years 100,000 years 28,000 ly 50,000 ly 100,000 ly
If you could travel at the speed of light, it would take you approximately 28,000 years to travel from Earth to the center of the Milky Way Galaxy.
Although it is currently impossible for any object with mass to travel at the speed of light, we can use the speed of light to calculate the time it would take to travel to the center of the Milky Way Galaxy if it were possible.
The distance from Earth to the center of the Milky Way Galaxy is approximately 28,000 light-years. This means that it would take light (traveling at the speed of light) approximately 28,000 years to make the journey from the center of the Milky Way Galaxy to Earth.If you were able to travel at the speed of light, you would be able to cover this distance in exactly 28,000 years (from your perspective). This is because, according to the theory of relativity, time would appear to slow down for you as you approach the speed of light.However, it is important to note that this is a hypothetical scenario, as it is currently impossible for any object with mass to travel at the speed of light.for such more questions on speed of lights
https://brainly.com/question/104425
#SPJ11
Positive charge is distributed uniformly throughout a large insulating cylinder of radius R=0.900 m. The charge per unit length in the cylindrical volume is λ = 3.00×10^−9 C/m. Calculate the magnitude of the electric field at a distance of 0.200 m from the axis of the cylinder. (Note: εo = 8.854×10^−12 C2/N^−1 m2.)
When Positive charge is distributed uniformly throughout a large insulating cylinder of radius R=0.900 m. The charge per unit length in the cylindrical volume is λ = 3 ×10⁻⁹ C/m. then the magnitude of the electric field at a distance of 0.200 m from the axis of the cylinder is 33.88 N/C.
Electric field is field around electrically charged particle where columbic force of attraction or repulsion can be experienced by other charged particles. It is denoted by letter E and it's SI unit is V/m Volt per meter or N/C newton per coulomb. Electric field comes inward to the center of the negative charge and it is going outward for positive charge.
The electric field E at a point outside the charged cylinder at a distance r is given by,
E = [tex]\frac{\lambda r}{2\epsilon }[/tex]
where λ is charge density, r is distance, ε₀ = 8.854×10⁻¹² m⁻³ kg⁻¹ s⁴A²= permittivity of free space.
Given,
λ = 3 ×10⁻⁹ C/m
radius R = 0.900 m
r = 0.200 m
ε₀ = 8.854×10⁻¹² m⁻³ kg⁻¹ s⁴A².
[tex]E = \frac{\ 3 *10^{-9} *0.2}{2 * 8.854*10^{-12} }[/tex]
E = 33.88 N/C
To know more about electric field :
https://brainly.com/question/15800304
#SPJ4.
Which of the following sentences about a persons voice is FALSE?
A. The fundamental frequency of a person's speech tends to be lower when they are sad.
B. The duration of phonemes in an person's speech are typically longer when they are angry.
C. The fundamental frequency of a person's speech tends to be higher when they are excited or joyful.
D. The duration of phonemes in an person's speech are typically longer when they are sad.
In fact, some research has suggested that angry speech may actually be characterized by shorter phoneme durations, as well as higher fundamental frequencies and greater variability in pitch and loudness.
The FALSE sentence is B. The duration of phonemes in a person's speech is typically not longer when they are angry.
The fundamental frequency of a person's speech tends to vary based on their emotional state. When a person is excited or joyful, their fundamental frequency tends to be higher, while when they are sad, their fundamental frequency tends to be lower. The duration of phonemes in a person's speech can also vary with their emotional state, but the general pattern is that phonemes are typically longer when a person is happy or relaxed, and shorter when they are stressed or anxious.
However, there is little evidence to suggest that the duration of phonemes in a person's speech is typically longer when they are angry. In fact, some research has suggested that angry speech may actually be characterized by shorter phoneme durations, as well as higher fundamental frequencies and greater variability in pitch and loudness.
To learn more about variability visit:
https://brainly.com/question/17344045
#SPJ11
1D explosion: Hauler moving along an x axis in space, has INTERNAL explosion, leaves a module behind. Given initial V relative to sun, masses, V hauler relative to module.What is V hauler relative to sun?
A space hauler and cargo module with a total mass of M travel with initial velocity [tex]v_i[/tex] relative to the Sun. After ejecting the module, the velocity of the hauler relative to the Sun is 1975 km/h.
Let's start by applying the law of conservation of momentum. Assuming that there are no external forces acting on the system, the total momentum before the explosion is equal to the total momentum after the explosion.
Let's denote the mass of the hauler as m₁, the mass of the module as m₂, the initial velocity of the hauler relative to the sun as v₁, and the velocity of the hauler relative to the module as v₂. We know that m₁ + m₂ = M, and that m₂ = 0.20M.
Before the explosion, the total momentum of the system is
P₁ = m₁*v₁
After the explosion, the hauler and the module move in opposite directions. Let's assume that the hauler moves to the right and the module moves to the left. The total momentum of the system after the explosion is
P₂ = m₁*(v₁ + 500 km/h) + m₂*(-v)
where the negative sign in front of v₂ indicates that the module is moving in the opposite direction to the hauler.
By applying the conservation of momentum, we can set P₁ equal to P₂:
m₁v₁ = m₁(v₁ + 500 km/h) + m₂*(-v₂)
Simplifying this equation gives
v₁ = v2/5
Since m₂ = 0.20M and m₁ + m₂ = M, we have m₁ = 0.80M. Therefore:
v₁ = v₂/5 = (-0.20M)/(0.80M) * 500 km/h = -125 km/h
The negative sign indicates that the hauler is moving in the opposite direction to the initial velocity [tex]v_i[/tex]. Therefore, the velocity of the hauler relative to the Sun is
[tex]v_{1final}[/tex] = [tex]v_i[/tex] + v₁ = 2100 km/h - 125 km/h = 1975 km/h
So the velocity of the hauler relative to the Sun is 1975 km/h.
To know more about velocity:
https://brainly.com/question/30559316
#SPJ4
--The given question is incomplete, the complete question is given
" A space hauler and cargo module, of total mass M, travels along an x axis in deep space. They have an initial velocity vi of magnitude 2100 km/h relative to the Sun. With a small explosion, the hauler ejects the cargo module, of mass 0.20M. The hauler then travels 500 km/h faster than the module along the x axis; that is, the relative speed between the hauler and the module is 500 km/h. What then is the velocity of the hauler relative to the Sun?"--
(T/F) The reference level is when the GPE can be defined as zero.
True, when the reference level is when the Gravitational Potential Energy (GPE) can be defined as zero. This is a point where the object's height is considered zero, and thus the GPE at that position is also zero.
Gravitational Potential Energy (GPE) is the energy moved or procured by an item because of an adjustment of its position when it is available in a gravitational field Simply put, gravitational potential energy is energy that is associated with gravity or the gravitational force. The potential energy that a massive object has in relation to another massive object due to gravity is called gravitational potential energy. It is the potential energy that is associated with the gravitational field and is released when objects fall toward one another. Potential energy is stored when you are above the surface of the Earth. This is called gravitational likely energy (GPE).
learn more about Gravitational Potential Energy (GPE) here
https://brainly.com/question/17511189
#SPJ11
Suppose the time you take to bring the egg to a stop is ∆t. Would you rather catch the egg in such a way that ∆t is small or large. Why?
When catching an egg, it's generally better to aim for a larger value of Δt, which represents the time it takes to bring the egg to a stop. This is because the force exerted on the egg is inversely proportional to the time interval Δt, as described by the impulse-momentum theorem:
Impulse = Force × Δt = change in momentum
A larger Δt means that the force exerted on the egg is smaller, making it less likely for the egg to crack or break.
When you catch the egg by gradually slowing it down, you're effectively increasing the time interval Δt, thus reducing the force acting upon the egg.
In contrast, a smaller Δt corresponds to a larger force, which increases the risk of breaking the egg due to a more abrupt stop.
So, to minimize the risk of breaking the egg, it's best to catch it in such a way that Δt is large, allowing for a gentler deceleration and a lower force acting on the egg.
For more such answers on Impulse
https://brainly.com/question/30395939
#SPJ11
a. Fill in the blanks in the following paragraph to identify the properties of mirrors and lenses.
Lenses produce images through _______________, but mirrors produce images through _______________. A _______________ mirror and a _______________ lens focus light at a point. A _______________ mirror and a _______________ lens spread light apart.
b. Compare the signs of ƒ for lenses and mirrors.
c. What kind of image is formed when the image distance is positive? What kind of image is formed when the image distance is negative?
a. Fill in the blanks in the following paragraph to identify the properties of mirrors and lenses.
Answer :
Lenses produce images through Refraction, but mirrors produce images through Reflection.
A Concave mirror and a convex lens focus light at a point. A convex mirror and a concave lens spread light apart.
b. Compare the signs of ƒ for lenses and mirrors.
Answer :
ƒ represents the focal length in lenses and mirrors.
For Concave lens and mirror - Value of f is always negative .
For convex lens and mirror - Value of f is always positive .
c. What kind of image is formed when the image distance is positive?
Answer: If the image distance is positive - The image will be formed real and inverted.
What kind of image is formed when the image distance is negative?
Answer: If the image distance is negative - The image will be formed virtual and erect .[tex]~[/tex]
A 600 −Ω and a 2800 −Ω resistor are connected in series with a 12-V battery.
What is the voltage across the 2800 −Ω resistor?
The voltage across the 2800-Ω resistor is approximately 9.88 V.
To find the voltage across the 2800-Ω resistor when it is connected in series with a 600-Ω resistor and a 12-V battery, follow these steps:
1. Calculate the total resistance (R_total) in the series circuit:
R_total = R1 + R2 = 600 Ω + 2800 Ω = 3400 Ω
2. Calculate the total current (I_total) flowing through the circuit using Ohm's Law:
I_total = Voltage / R_total = 12 V / 3400 Ω ≈ 0.00353 A
3. Calculate the voltage across the 2800-Ω resistor (V2) using Ohm's Law:
V2 = I_total ×R2 = 0.00353 A ×2800 Ω ≈ 9.88 V
The voltage across the 2800-Ω resistor is approximately 9.88 V.
To learn more about battery https://brainly.com/question/26466203
#SPJ11
What would the impulse be if the initial momentum of the cart were larger? What if the collision were inelastic rather than elastic, i.e.. what if the cart stuck to the wall after the collision?
Assuming the same impact time and force, a bigger initial momentum for the cart would result in a larger impulse and change in momentum.
Momentum is defined as mass times velocity. it tells about the moment of the body. it is denoted by p and expressed in kg.m/s. mathematically it is written as p = mv. A body having zero velocity or zero mass has zero momentum. its dimensions is [M¹ L¹ T⁻¹]. Momentum is conserved throughout the motion.
According to conservation law of momentum initial momentum is equal to final momentum.
impulse is the force times time which taken by body to change its momentum.
if the initial momentum is larger then impulse will be larger in collision.
to know more about impulse :
https://brainly.com/question/16980676
#SPJ4.
if the water is drawn in through two parallel, 3.3- m -diameter pipes, what is the water speed in each pipe?
The water speed in each pipe is the same.
To determine the water speed in each pipe, we need to know the flow rate of the water.
We can calculate the flow rate using the equation:
Q = A * V
where Q is the flow rate, A is the cross-sectional area of the pipes, and V is the velocity of the water.
Assuming that the pipes are carrying the same amount of water, we can set the flow rate for each pipe equal to each other:
Q1 = Q2
A1 * V1 = A2 * V2
We know that the diameter of each pipe is 3.3 meters, so we can calculate the cross-sectional area using the formula:
A = π * (d/2)²
where d is the diameter of the pipe.
Plugging in the values, we get:
A = π * (3.3/2)² = 8.56 m²
So for each pipe, we have:
A1 = A2 = 8.56 m²
Substituting into the flow rate equation, we get:
8.56 * V1 = 8.56 * V2
Dividing both sides by 8.56, we get:
V1 = V2
So the water speed in each pipe is the same. We cannot determine the exact speed without more information, but we know that it is equal in both pipes.
Learn more about speed:
https://brainly.com/question/13943409
#SPJ11
5.27 Eric has a mass of 60 kg. He is standing on a scale in an elevator that is accelerating downward at 1.7 m/s^2 . What is the approx. reading on the scale?A 0 NB 400 NC 500 ND 600 N
Eric has a mass of 60 kg. He is standing on a scale in an elevator that is accelerating downward at 1.7 m/[tex]s^{2}[/tex]
Hence, the correct option is C.
The force acting on Eric is the force due to gravity and the force due to the acceleration of the elevator.
The weight of Eric is given by
W = mg
Where W is the weight, m is the mass, and g is the acceleration due to gravity.
W = (60 kg)(9.8 m/[tex]s^{2}[/tex])
W = 588 N
The force due to the acceleration of the elevator is given by
F = ma
Where F is the force, m is the mass, and a is the acceleration of the elevator (-1.7 m/[tex]s^{2}[/tex] since it's accelerating downwards).
F = (60 kg)(-1.7 m/[tex]s^{2}[/tex]) = -102 N
F = -102 N
The approximate reading on the scale is the sum of the weight of Eric and the force due to the acceleration of the elevator.
Reading = W + F = 588 N - 102 N
Reading = = 486 N
Therefore, the approximate reading on the scale is 486 N.
Hence, the correct option is C.
To know more about elevator here
https://brainly.com/question/14281095
#SPJ4
if you stand between two parallel plane mirrors, you see an infinite number of images of yourself. this occurs because an image in one mirror is reflected in the other mirror to produce another image, which is then re-reflected, and so forth. the multiple images are equally spaced. suppose that you are facing a convex mirror, with a plane mirror behind you. describe what you would see and comment about the spacing between any multiple images. explain your resoning.
If you were standing between a convex mirror and a plane mirror, you would see a limited number of images of yourself.
The convex mirror would reflect your image in a distorted way, while the plane mirror would reflect your image as it appears in reality.
The images produced by the convex mirror would be smaller and farther away than the image produced by the plane mirror.
The spacing between the multiple images in this case would not be equal, as the convex mirror distorts the reflections.
The spacing would vary depending on the curvature of the convex mirror and the angle at which you are standing relative to the mirrors.
Overall, the combination of a convex and plane mirror would produce a unique and interesting visual effect, with some images being distorted and others being more true to life.
To know more about convex mirror here
https://brainly.com/question/3627454
#SPJ11
a block of mass m slides along a frictionless, horizontal table at a speed of v and hits a spring, compressing it by an amount of x . if this procedure is then repeated, except the block is launched at the spring with four times the speed as before, how much will the spring compress in terms of x ? express your answer as a multiple of x .
When the block is launched with four times the speed, its kinetic energy will increase by a factor of 16 (4^2) since kinetic energy is proportional to the square of the velocity. Therefore, when it hits the spring, the spring will compress by a factor of 16x (where x is the original amount of compression).
This can be seen from the equation for the potential energy stored in a spring:
U = (1/2)kx^2
where U is the potential energy stored in the spring, k is the spring constant, and x is the amount of compression.
Since the block's kinetic energy is increasing by a factor of 16, the work done by the block on the spring will also increase by a factor of 16. Therefore, we can write:
(1/2)mv^2 = 16(1/2)kx^2
Kinetic energy is the energy an object has because of its motion. If we want to accelerate an object, then we must apply a force. Applying a force requires us to do work. After work has been done, energy has been transferred to the object, and the object will be moving with a new constant speed
Simplifying this equation, we get:
x = (1/4)^(1/2) * x
Therefore, the spring will compress by a factor of 1/2 (or 0.5) of its original amount when the block is launched with four times the speed.
To know more about kinetic energy please click:-
https://brainly.com/question/26405082
#SPJ11
When a metal ball is charged by induction using a negatively charged plastic rod, what sign is the charge acquired by the metal ball?
When a metal ball is charged by induction using a negatively charged plastic rod, the charge acquired by the metal ball is positive.
This is because the negatively charged plastic rod attracts the positive charges in the metal ball, causing the negative charges to move away from the rod and towards the opposite end of the metal ball.
This leaves the end of the metal ball closest to the rod with a net positive charge, while the far end of the metal ball retains a net negative charge.
This separation of charges results in a positive charge on the end of the metal ball closest to the negatively charged rod.
To know more about induction here
https://brainly.com/question/18575018
#SPJ11
Think of Bernoulli's equation as it pertains to an ideal fluid flowing through a horizontal pipe. Imagine that you take measurements along the pipe in the direction of fluid flow. What happens to the sum of the pressure and energy per unit volume
a. increases as diameter increase
b. decreases as diameter increases
c. remains constant
d. no choices are valid
When considering the sum of pressure and energy per unit volume as the diameter of the pipe changes, the correct answer remains constant. Therefore, option c. is correct.
To understand this, let's look at Bernoulli's equation for an ideal fluid in a horizontal pipe:
P + 0.5 * ρ * v² + ρ * g * h = constant
Where:
- P is the pressure
- ρ is the fluid density
- v is the fluid velocity
- g is the gravitational acceleration
- h is the height (which is constant in a horizontal pipe)
In this case, we can disregard the third term (ρ * g * h) because the height is constant in a horizontal pipe. Thus, the equation becomes:
P + 0.5 * ρ * v² = constant
As the diameter of the pipe increases, the cross-sectional area also increases, and the fluid velocity decreases to maintain the same flow rate. This decrease in velocity leads to an increase in pressure.
However, the sum of the pressure and kinetic energy per unit volume remains constant according to Bernoulli's equation.
So, option c. is correct.
Learn more about pressure:
https://brainly.com/question/28012687
#SPJ11
A piece of aluminum has density 2.70 g/cm3 and mass 775 g. The aluminum is submerged in a container of oil of density 0.650 g/cm3. A spring balance is attached with string to the piece of aluminum. What reading will the balance register in grams (g) for the submerged metal?
The spring balance will register a reading of 588.42 g for the submerged aluminum piece.
To find the reading on the spring balance in grams (g) for the submerged aluminum piece, we need to use the terms density, mass, and buoyancy.
Here's a step-by-step explanation:
1. First, find the volume of the aluminum piece using the formula: Volume = Mass / Density.
Volume = 775 g / 2.70 g/cm³ = 287.04 cm³
2. Next, calculate the buoyant force exerted on the aluminum by the oil using the formula:
Buoyant Force = Volume × Density of oil × g (acceleration due to gravity)
Buoyant Force = 287.04 cm³ × 0.650 g/cm³ × 9.81 m/s² = 1830.31 g × m/s²
3. Convert the buoyant force from g × m/s² to grams (g) by dividing by g (9.81 m/s²):
Buoyant Force (in grams) = 1830.31 g × m/s² / 9.81 m/s² = 186.58 g
4. Finally, find the reading on the spring balance by subtracting the buoyant force from the mass of the aluminum piece:
Reading on the balance = Mass - Buoyant Force (in grams)
Reading on the balance = 775 g - 186.58 g = 588.42 g
Learn more about spring balance:
https://brainly.com/question/13873119
#SPJ11
A person weighs 784 N on Earth. On the moon, g = 1.60 m/s^2. How much would this person weigh on the moon.
Answer:
Weight is the force exerted on an object due to gravity and is calculated as the product of an object’s mass and the acceleration due to gravity. On Earth, the acceleration due to gravity is approximately 9.8 m/s^2. So, if a person weighs 784 N on Earth, their mass would be 784 N / 9.8 m/s^2 = 80 kg.
On the moon, where the acceleration due to gravity is 1.60 m/s^2, this person would weigh 80 kg * 1.60 m/s^2 = 128 N.
Explanation:
by how much would the index of refraction need to be increased to move the image 5.0 cm closer to the lens?
The change in the refractive index when the lens is brought near to the image is 0.014.
The refractive index is used to calculate the speed of light between two mediums. It is the ratio of the speed of light in a vacuum to that of the speed of light in a denser medium. It is inversely proportional to the speed of light, n = c/v. The focal length is the distance between the lens and the image. The refractive index depends on the focal length and they are inversely proportional.
From the given question,
The refractive index before the image was moved closer to the lens, n₁ = 1.5, Radius of curvature R₂ = ₋15 cm, Distance (s) = 50 cm. The focal length can be calculated by the lens markers equation, 1/f = (n-1) (1/R₁-1/R₂) where R₁ and R₂ are the radii of the curvature and R₁ is at infinity because the lens is concave. The focal length is f= 30 cm.
Next, to find the object's distance 1/f = 1/s + 1/s', and s' is 75 cm. When the image comes closer to the lens, the distance is 70 cm. The new focal length (f') is 1/f' = 1/s + 1/s' and f' = 29.17. The new refractive index n' is
1/f' = (n'-1) (1/R₁-1/R₂) and n' is 1.514.
The change in refractive index, Δn = n₁-n' = 1.5-1.514 = 0.414.
Thus, the new refractive index is 0.414.
To learn more about the refractive index:
https://brainly.com/question/30761100
#SPJ4
Your question is incomplete, most probably your question is, Some electro-optic materials can change their index of refraction in response to an applied voltage. Suppose a plano-convex lens (flat on one side,15.0 cm radius of curvature on the other). made from a material whose normal index of refraction is 1.500, creating an image of an object that is 50.0 cm from the lens. By how much would the index of refraction need to be increased to move the image 5.0 cm closer to the lens?
And according to the answer, a change in refractive index is 0.414.
