What redox reaction occurs in a Nickel Cadmium Battery?

The given statement is a

physical property of sodium (Na)

.

A physical property is a characteristic of a substance that can be observed or measured without changing the identity of the substance. Physical properties include color, density, hardness, and melting and boiling points. A chemical property describes the ability of a substance to undergo a specific chemical change.

#SPJ11

Learn more about

properties of sodium

on: https://brainly.com/question/20688856

During acidosis, the K+ balance in the α-intercalated cell is affected as follows:

During acidosis, the pH of the blood decreases, resulting in an increase in hydrogen ions (H+). In the α-intercalated cells of the collecting ducts in the kidneys, compensatory mechanisms take place to regulate acid-base balance.

One of these mechanisms involves the exchange of H+ ions for K+ ions in the Na/K+ ATPase pump on the basolateral surface of the α-intercalated cell.

This leads to a decrease in intracellular K+ concentration, as less K+ is pumped into the cell and more K+ is secreted into the lumen of the collecting duct. This can result in hyperkalemia, an elevated concentration of K+ ions in the blood, which can have physiological effects and is a concern in acidotic conditions.

To know more about acidosis refer here:-

https://brainly.com/question/9928463#

#SPJ11

The theoretical yield of CuS is 0.198 g.Option (b)

To determine the theoretical yield of CuS, we need to first determine the limiting reactant. We can use the stoichiometry of the balanced chemical equation to convert the given masses of reactants to moles:

[tex]\text{mol Na}_2\text{S} &= \frac{15.5\text{ g}}{78.04\text{ g/mol}} = 0.198\text{ mol}\[/tex]

[tex]\text{mol CuSO}_4 &= \frac{12.1\text{ g}}{159.61\text{ g/mol}} = 0.0758\text{ mol}[/tex]

We can see that [tex]CuSO$_4$[/tex]is the limiting reactant since it produces the smaller amount of moles of product based on the stoichiometric coefficients of the balanced chemical equation.

The stoichiometry of the balanced equation tells us that 1 mole  [tex]CuSO$_4$[/tex] reacts with 1 mole of CuS. Therefore, the theoretical yield of CuS can be calculated as:

[tex]\text{mol CuS} &= \text{mol CuSO}_4 = 0.0758\text{ mol}\[/tex]

[tex]\text{mass CuS} &= \text{mol CuS} \times \text{molar mass of CuS}\[/tex]

[tex]&= 0.0758\text{ mol} \times 95.61\text{ g/mol} \[/tex]

[tex]&= \boxed{\text{(B) 0.198 g}}\end{align*}[/tex]

Therefore, the theoretical yield of CuS is 0.198 g.

Learn more about  theoretical yield

https://brainly.com/question/14966377

#SPJ4

The pH of the solution after adding 0.050 moles of solid NaOH to 500 ml of a 0.2 M benzoic acid solution is 8.09.

pH of the solution after adding 0.050 moles of solid NaOH to 500 ml of a 0.2 M benzoic acid solution, we need to first determine the reaction that occurs between NaOH and benzoic acid.

NaOH (s) + C6H5COOH (aq) → C6H5COO-Na+ (aq) + H2O (l)

From this balanced equation, we can see that NaOH reacts with benzoic acid to form sodium benzoate and water.

pH of the resulting solution, we need to consider the initial concentration of benzoic acid and the concentration of the resulting sodium benzoate.

The initial concentration of benzoic acid is 0.2 M, which means that there are 0.2 moles of benzoic acid in 1 liter of solution.

When 0.050 moles of NaOH is added to the solution, it reacts with 0.050 moles of benzoic acid to form 0.050 moles of sodium benzoate.

The total volume of the resulting solution is 500 ml or 0.5 liters.

The new concentration of sodium benzoate is:

0.050 moles / 0.5 L = 0.1 M

To calculate the pH of the solution, we need to consider the dissociation of benzoic acid and the hydrolysis of sodium benzoate.

Benzoic acid is a weak acid that partially dissociates in water. Its dissociation constant, Ka, is 6.5 × 10⁻⁵.

C6H5COOH (aq) + H2O (l) ⇌ C6H5COO- (aq) + H3O+ (aq)

At equilibrium, we can use the following equation to calculate the concentration of H3O+:

Ka = [H3O+][C6H5COO-] / [C6H5COOH]

[H3O+] = Ka[C6H5COOH] / [C6H5COO-] = (6.5 × 10⁻⁵)(0.2) / 0.1 = 1.3 × 10⁻⁴ M

So the pH of the solution before adding NaOH is:

pH = -log[H3O+] = -log(1.3 × 10⁻⁴) = 3.89

After adding NaOH, the sodium benzoate will hydrolyze to form benzoic acid and NaOH.

C6H5COO- (aq) + H2O (l) ⇌ C6H5COOH (aq) + OH- (aq)

The hydrolysis of sodium benzoate produces hydroxide ions, which will react with any remaining benzoic acid to form water.

The concentration of OH- can be calculated using the Kb of sodium benzoate, which is the reverse of the Ka of benzoic acid:

Kb = Kw / Ka = 1.0 × 10⁻¹⁴/ 6.5 × 10⁻⁵ = 1.5 × 10⁻¹⁰

[OH-] = sqrt(Kb[C6H5COO-]) = sqrt((1.5 × 10⁻¹⁰)(0.1)) = 1.22 × 10⁻⁶ M

The concentration of H3O+ can be calculated using the ion product constant of water:

Kw = [H3O+][OH-] = 1.0 × 10⁻¹⁴

[H3O+] = Kw / [OH-] = 1.0 × 10⁻¹⁴ / 1.22 × 10⁻⁶ = 8.20 × 10⁻⁹ M

So the pH of the resulting solution is:

pH = -log[H3O+] = -log(8.20 × 10⁻⁹) = 8.09

The pH of the solution after adding 0.050 moles of solid NaOH to 500 ml of a 0.2 M benzoic acid solution is 8.09.

Learn more about Solid naoh and benzoic acid

brainly.com/question/29010858

#SPJ11

2.5 moles of Al₂O₃ can form from 5.0 moles of Al.

In the field of chemistry, moles serve as a fundamental unit of measurement to quantify the amount of a given substance. To be precise, one mole is equivalent to the number of elementary entities - atoms, molecules or ions - present in 12 grams of carbon-12. This definition helps scientists accurately measure and express quantities in their experiments and research endeavors.

Equation:

4 Al + 3 O₂ → 2 Al₂O₃

From the balanced equation, we can see that 4 moles of Al reacts with 3 moles of O₂ to form 2 moles of Al₂O₃.

So, for every 4 moles of Al used in the reaction, 2 moles of Al₂O₃ are produced. We can use this ratio to calculate the moles of Al₂O₃ that can be formed from 5.0 moles of Al:

Moles of Al₂O₃ = (5.0 mol Al) x (2 mol Al₂O₃ / 4 mol Al) = 2.5 mol Al₂O₃

To know more about moles, click here

https://brainly.com/question/26416088

#SPJ1

During exercise, our body needs more energy to fuel our muscles, and this energy is produced by a process called cellular respiration. Cellular respiration requires oxygen to break down glucose and produce ATP, the main source of energy for our cells.

To meet the increased demand for oxygen, our body increases our breathing rate and depth. This allows more oxygen to enter our lungs, and more carbon dioxide, a byproduct of cellular respiration, to be removed from our body. The oxygen-rich air then travels to our cells, where it can be used to produce ATP more efficiently.

In addition, our heart rate also increases during exercise to deliver oxygenated blood to our muscles more quickly. This enables our muscles to work harder and for longer periods of time, leading to improved endurance and overall fitness.

Overall, the increase in breathing during exercise is a vital adaptation that allows our body to meet the demands of physical activity and sustain energy production in our cells.

To know more about Cellular respiration refer here:

https://brainly.com/question/13721588#

#SPJ11

Since a voltage source is applied to gel electrophoresis, it follows the same principles as an electrolytic cell. Negatively charged molecules will travel toward the positive electrode (anode).

In gel electrophoresis, a voltage source is applied to the gel, causing charged molecules to move through the gel matrix. The direction of movement of the charged molecules depends on their charge, with negatively charged molecules moving towards the positive electrode (anode), and positively charged molecules moving towards the negative electrode (cathode).

This is because when a voltage is applied to the gel, it creates an electric field that exerts a force on the charged molecules. The force is proportional to the charge on the molecule and the strength of the electric field. Therefore, negatively charged molecules experience a force in the direction of the positive electrode, while positively charged molecules experience a force in the direction of the negative electrode.

As a result, during gel electrophoresis, negatively charged molecules, such as DNA, RNA, and proteins, will travel towards the anode. The separation of these molecules based on their size and charge allows for the analysis of DNA fragments, protein samples, and other biomolecules.

For more such questions on Gel Electrophoresis.

https://brainly.com/question/2960312#

#SPJ11

The reaction between an asymmetrical alkyne and one equivalent of hydrogen halide (HX) typically leads to the formation of a mixture of two or more products, depending on the structure of the alkyne and the specific halogen acid used.

The major product formed in this reaction is usually the addition product, where the HX molecule adds across the triple bond of the alkyne to form a halogenated alkene.

The position of the halogen atom in the product depends on the nature of the alkyne and the specific halogen acid used.

For example, if we consider the reaction between propyne and HCl, the major product formed is 2-chloropropane, which is an alkene with the Cl atom added at the terminal carbon atom.

The minor product formed in this reaction is usually the isomerization product, where the triple bond of the alkyne is shifted to form a new triple bond between the two adjacent carbon atoms.

This reaction is also known as tautomerization, and it results in the formation of an internal alkyne.

For example, if we consider the reaction between propyne and HBr, the minor product formed is 1-bromopropene, which is an alkene with the Br atom added at the internal carbon atom.

Overall, the reaction between an asymmetrical alkyne and HX leads to the formation of a mixture of two or more products, with the addition product being the major product and the isomerization product being the minor product.

learn more about isomerization here:

https://brainly.com/question/2226351?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

The class of bombs that is typically used against targets such as reinforced concrete structures and bridges is called "penetrator bombs."

These bombs are designed to penetrate and explode within the target, causing significant damage to the structure. They often have a hardened casing or specialized warhead to enable them to penetrate through tough materials like reinforced concrete.

Therefore, the class of bombs used against targets such as reinforced concrete structures and bridges is called "bunker busters" or "penetrator bombs."

https://brainly.com/question/31606069#

#SPJ11

In the titration of 50.0 ml of 0.400 m hcooh with 0.150 m lioh, the equivalence point is the point at which the moles of acid and base are equal.  133 mL of 0.150 M lioh are required to reach the equivalence point in the titration of 50.0 mL of 0.400 M hcooh.

To find the volume of lioh required to reach the equivalence point, we can use the equation:

n(hcooh) = n(lioh)

Where n is the number of moles of each compound. The number of moles of hcooh is:

n(hcooh) = C(hcooh) x V(hcooh)
n(hcooh) = 0.400 mol/L x 0.0500 L
n(hcooh) = 0.0200 mol

At the equivalence point, the number of moles of lioh added is equal to the number of moles of hcooh. So:

n(lioh) = 0.0200 mol

We can use the equation above to find the volume of lioh required:

n(lioh) = C(lioh) x V(lioh)
V(lioh) = n(lioh) / C(lioh)
V(lioh) = 0.0200 mol / 0.150 mol/L
V(lioh) = 0.133 L or 133 mL

Learn more about equivalence point here:

brainly.com/question/31375551

#SPJ11

This experiment presents the connection between CO2 emissions, ocean acidification, and the significance of pH management in various circumstances in a straightforward yet powerful way.

Why does adding baking soda cause red cabbage to turn blue instead of purple?

A substance known as anthocyanin can be found in red cabbage. This's color varies according to how acidic its surroundings are. It turns pink or red in the presence of an acid, purple when neutral, and blue or green when combined with an alkaline material.

Anthocyanin, a water-soluble pigment found in red cabbage, can change color when combined with an acid or a basic. The color changes from bluish-green to red in alkaline (basic) surroundings with pH levels above 7, and from acidic to basic conditions with pH levels below 7.

To learn more about pH use:

https://brainly.com/question/172153

#SPJ1

To draw the Lewis structure for sulfate (SO₄²⁻) with minimized formal charges and determine the total likely resonance structures, follow these steps:

1. Identify the central atom: Sulfur (S) is the central atom in the sulfate ion.
2. Count the total number of valence electrons: Sulfur has 6, each oxygen has 6, and there are 2 extra electrons due to the 2- charge. So, the total number of valence electrons is 6 + 4(6) + 2 = 32.
3. Connect the central atom to the surrounding atoms with single bonds: Connect the sulfur atom to each of the four oxygen atoms using single bonds. This uses up 8 valence electrons (2 for each bond).
4. Distribute the remaining valence electrons to complete the octets of the surrounding atoms: 32 - 8 = 24 valence electrons are left. Distribute them to the four oxygen atoms to complete their octets (6 electrons for each oxygen atom).
5. Check for the need for multiple bonds to satisfy the octet rule for the central atom: Sulfur has 8 electrons around it (1 from each single bond), so the octet rule is satisfied.

Now, the Lewis structure is complete with minimized formal charges. However, there are multiple resonance structures for SO₄²⁻. Since sulfur can form double bonds with any of the four oxygen atoms, there are a total of 4 likely resonance structures for SO₄²⁻, with one double bond in each resonance structure and the remaining oxygen atoms having single bonds.

To know more about Lewis structure:

https://brainly.com/question/20300458

#SPJ11

The  lineweaver-Burk plot is applicable for enzyme kinetics and image of same is attached below.

Enzymes are proteins that act as biological catalysts by accelerating chemical reactions. The molecules upon which enzymes may act are called substrates, and the enzyme converts the substrates into different molecules known as products. Almost all metabolic processes in the cell need enzyme catalysis in order to occur at rates fast enough to sustain life.

When used for determining the type of enzyme inhibition, the Lineweaver–Burk plot can between distinguish competitive, pure non-competitive and uncompetitive inhibitors. The various modes of inhibition can be compared to the uninhibited reaction.

Learn more about enzymes,here:

https://brainly.com/question/31385011

#SPJ4

The mix 100. 0 g of the water at the 22. 8 with 75. 0 g of water at 72. 5 C. The final temperature of the water is 44 °C.

The expression for the heat flow equation :

q = ± mc ΔT

The expression for the q hotter :

q hotter = - mc ΔT

q hotter = - ( 75 × 4.184) ( T - 72.5)

q colder = mc ΔT

q colder = ( 100 × 4.184) ( T - 22.8)

q hotter + q colder = 0

- ( 75 × 4.184) ( T - 72.5) =  ( 100 × 4.184) ( T - 22.8)

- 313.8 ( T - 72.5) = 418.4 ( T - 22.8)

- 0.75 T + 54.37 = ( T - 22.8)

1.75 T = 77.17

T = 44 °C

The final temperature is 44 °C.

To learn more about temperature here

https://brainly.com/question/27999908

#SPJ4

To make 325.0 ml of a solution with a pH of 2.71, we would need 0.045 ml (or 45 µl) of 9.53 M HCl.

How to find the volume?

To determine the volume of 9.53 M HCl required to make 325.0 ml of a solution with a pH of 2.71, we need to calculate the concentration of H+ ions in the solution using the pH value.

Use the concentration of H+ ions and the volume of the solution to calculate the moles of H+ ions.

Use the balanced chemical equation for HCl to determine the moles of HCl required.

HCl + H2O → H3O+ + Cl-

1 mole of HCl produces 1 mole of H3O+ ions.

Therefore, the moles of HCl required is equal to the moles of H3O+ ions:

moles of HCl = 4.29 x 10⁻⁴ mol

Use the molarity of HCl and the moles of HCl required to calculate the volume of HCl needed.

Convert liters to milliliters:

Therefore, to make 325.0 ml of a solution with a pH of 2.71, we would need 0.045 ml (or 45 µl) of 9.53 M HCl.

Learn more about volume

brainly.com/question/1578538

#SPJ11

The smallest possible integer coefficient of Ag(s) in the combined balanced equation is 2.

The galvanic cell you've provided can be represented by the following half-reactions:

Anode (oxidation): Ag(s) -> Ag+(aq) + e-
Cathode (reduction):[tex]Hg_{2}[/tex][tex]CI_{2}[/tex](s) + 2e- -> 2Hg(l) + 2Cl-(aq)

Now, we need to balance the half-reactions so that the number of electrons transferred in both reactions is equal.

To do this, multiply the anode half-reaction by 2 to match the number of electrons in the cathode half-reaction:

2Ag(s) -> 2Ag+(aq) + 2e-

With balanced half-reactions, we can now combine them to form the overall balanced equation:

2Ag(s) +[tex]Hg_{2}[/tex][tex]CI_{2}[/tex](s) -> 2AgCl(s) + 2Hg(l)

This means that two moles of silver (Ag) participate in the overall reaction. This is important for maintaining charge balance and ensuring that the reaction proceeds correctly in the galvanic cell.

know more about half-reactions here:

https://brainly.com/question/29818795

#SPJ11

The false statement is applied pressure only refers to atmospheric pressure and the correct option is option 1.

It is the ratio of the force applied to the surface area over which the force is applied. Pressure can be defined as the force applied perpendicular to the surface of an object per unit area over which that force is distributed. Atmospheric pressure is the pressure exerted by the atmosphere on the earth.

Thus applied pressure not only represents atmospheric pressure.

Learn more about Pressure, here:

https://brainly.com/question/29341536

#SPJ4

Three compounds are soluble in water: [tex]LiNO_{3}[/tex], [tex]NH_{4} Br[/tex], and [tex]K_{2} S[/tex]. [tex]Cu(OH)_{2}[/tex] is insoluble.

Dissolvability is a pivotal figure deciding how a substance connects with water, an omnipresent and fundamental dissolvable in numerous synthetic and organic cycles.

At the point when a compound is solvent in water, it can break down and structure a homogeneous arrangement with water, while an insoluble compound can't disintegrate in water and structures a heterogeneous combination.

Among the given mixtures, [tex]Cu(OH)_{2}[/tex] (copper(II) hydroxide) is insoluble in water because of its fundamental nature, which makes it have a low dissolvability in water.

Conversely, [tex]LiNO_{3}[/tex] (lithium nitrate), [tex]NH_{4} Br[/tex] (ammonium bromide), and [tex]K_{2} S[/tex] (potassium sulfide) are ionic mixtures that promptly separate in water, shaping particles that can collaborate with the water atoms and break down.Lithium nitrate ([tex]LiNO_{3}[/tex]) is a salt that promptly separates in water, shaping [tex]Li^{+}[/tex] and [tex]NO_{3}^{-[/tex] particles.

Ammonium bromide ([tex]NH_{4} Br[/tex]) is another salt that can promptly disintegrate in water, separating into [tex]NH_{4}^{+}[/tex] and [tex]Br^{-}[/tex]particles. Potassium sulfide ([tex]K_{2} S[/tex]) is likewise a solvent compound that promptly separates in water, creating [tex]K^{+}[/tex] and [tex]S_{2}^{-}[/tex]particles.

Subsequently, out of the four given compounds, three of them are dissolvable in water, while one is insoluble. The solvent mixtures are [tex]LiNO_{3}[/tex], [tex]NH_{4} Br[/tex], and [tex]K_{2} S[/tex], while [tex]Cu(OH)_{2}[/tex] is insoluble. The solvency of a compound can have significant ramifications for its properties and applications, remembering its possible use for drug conveyance, horticulture, and modern cycles.

To learn more about compounds soluble in water, refer:

https://brainly.com/question/13019391

#SPJ4

The measurement can be written as 5.6 ± 0.05 grams, indicating that the true value of the weight lies between 5.55 grams and 5.65 grams with a confidence level of 68%. The uncertain digit(s) should always be recorded, along with the certain digits, to communicate the precision and accuracy of the measurement.

In a measured quantity, the digits that are certain are the digits that can be read directly from the measuring instrument or specified by the definition of the unit of measurement. The digits that are uncertain are the last digit or digits that are estimated or interpolated based on the measuring instrument's resolution or the observer's judgment.

For example, if a scale displays a weight of 5.6 grams, the digit 5 is certain, and the digit 6 is uncertain, as it is estimated based on the scale's resolution. If the scale has a resolution of 0.1 grams, then the uncertainty in the measurement is ±0.05 grams.

Click the below link, to learn more about Certainity of Measurement:

https://brainly.com/question/29691305

#SPJ11

The acetylide anion will react with the alcohol to form an alkene via a nucleophilic addition reaction. This is because the nucleophilic carbon of the acetylide anion can form a covalent bond with the electrophilic oxygen of the alcohol.

This results in the loss of the acetylide anion's negative charge, thus stabilizing it. The product of the reaction is an alkene and an alcohol molecule. The alcohol molecule can then be removed in a dehydration reaction, resulting in a double bond between the two carbons of the acetylide anion.

This type of reaction is a common way of synthesizing alkenes from alcohols and is known as the acetylide anion method.

Know more about alkene here

https://brainly.com/question/31033378#

#SPJ11

The relatively vertical zone of a titration curve indicates a rapid change in pH with the addition of a small amount of titrant, indicating that the buffer capacity of the solution is low.

The relatively vertical zone of a titration curve tells us that there is a rapid change in pH with the addition of a small amount of titrant. This occurs when the titrant is in excess and has completely reacted with the analyte. During this zone, the pH of the solution changes rapidly from the equivalence point, indicating that the buffer capacity of the solution is low.

The vertical zone corresponds to the stoichiometric point, which is the point where all the analyte has reacted with the titrant, and the pH is solely determined by the excess titrant. This zone is crucial for accurate titration results, as it indicates that the titration has reached its endpoint.

It is important to note that this zone varies depending on the strength of the acid or base being titrated and the concentration of the titrant. Overall, the relatively vertical zone of a titration curve provides insight into the pH changes that occur during the titration process and helps to determine the endpoint accurately.

For more such questions on titration curve, click on:

https://brainly.com/question/3130161

#SPJ11

The radioactive decay of tritium, 3H, follows first-order kinetics, meaning the rate of decay is proportional to the amount of tritium present. The half-life of tritium is 12.3 years, meaning that in this time, the amount of tritium present will be halved.

Therefore, in order to calculate how long it will take for a sample of 1.00 moles of tritium to decrease to 0.0625 moles, we need to use the equation: t= (ln 0.0625 - ln 1.00)/(-0.693/12.3)

This equation gives us a result of 91.9 years, meaning it will take 91.9 years for the sample of tritium to decrease from 1.00 moles to 0.0625 moles. This is because the half-life of tritium is 12.3 years, meaning that if given enough time, the amount of tritium present in the sample will decrease exponentially.

Know more about radioactive decay here

https://brainly.com/question/1770619#

#SPJ11

At pH 7.5, at what relative rate does the enzyme hydroxylate Compound 1 compared to nonproductively producing H2O2 as a result of interacting with lysine?

1. First, we need to know the specific enzyme's activity profile at different pH levels. This information can usually be found in the enzyme's literature or experimental data.

2. Locate the enzyme's activity at pH 7.5 for both the hydroxylation of Compound 1 and nonproductive production of H2O2 when interacting with lysine.

3. Divide the enzyme's activity for hydroxylation of Compound 1 at pH 7.5 by the activity for nonproductive production of H2O2 when interacting with lysine at pH 7.5.

4. The resulting value will represent the relative rate at which the enzyme hydroxylates Compound 1 compared to nonproductively producing H2O2 as a result of interacting with lysine at pH 7.5.

Please note that without specific information about the enzyme and its activity at different pH levels, it's impossible to provide a numerical answer for the relative rate.

To know more about enzyme's:

https://brainly.com/question/31561117

#SPJ11

The body centered cubic unit cell has motifs placed at the corners and its centre. Thus a body centered unit cell may be formed from a primitive cell by placing a motif at the centre of the cell. There are a total of 3 body centred unit cells.

In the body centered cubic unit cell, there are atoms at the 8 corners as well as at the centre of the cube. The contribution of each atom at the corner towards the unit cell is 1/8 since it is shared by 8 unit cells.

The contribution of 8 atoms at the corners is 1 and that of the atom at the body centre is 1. So the total number of atoms in the bcc unit cell is 2.

Thus the correct option is B.

To know more about bcc unit cell, visit;

https://brainly.com/question/12977980

#SPJ4

The empirical formula for the substance is SnCl₄.

To determine the empirical formula of the substance containing 45.57% tin and 54.43% chlorine, follow these steps:

1. Assume 100 grams of the substance. This means it contains 45.57 grams of tin and 54.43 grams of chlorine.
2. Convert the masses to moles by dividing by the respective atomic masses. For tin (Sn), the atomic mass is approximately 118.71 g/mol, and for chlorine (Cl), it's 35.45 g/mol:

  Moles of Sn = 45.57 g / 118.71 g/mol ≈ 0.384 mol
  Moles of Cl = 54.43 g / 35.45 g/mol ≈ 1.536 mol

3. Find the ratio of moles by dividing both by the smallest number of moles:

  Ratio of Sn = 0.384 mol / 0.384 mol = 1
  Ratio of Cl = 1.536 mol / 0.384 mol ≈ 4

4. The empirical formula is the ratio of moles represented by whole numbers: Sn1Cl4.

To know more about the empirical formula refer here :

https://brainly.com/question/14044066#

#SPJ11

Answer:

is easy

Explanation:

edge 2022

Some elements can exceed the octet rule and have more than eight electrons in their valence shell. These elements are typically found in the third row and beyond of the periodic table, and include phosphorus, sulfur, chlorine, and some transition metals.

The octet rule suggests that atoms tend to gain, lose, or share electrons in order to have eight electrons in their outermost shell, or valence shell. This is because having eight valence electrons makes the atom more stable, due to a full outer shell.

However, some elements can exceed the octet rule and have more than eight electrons in their valence shell. These elements typically have access to d orbitals, which can hold additional electrons.

Elements that can exceed the octet rule include those in the third row and beyond of the periodic table, such as phosphorus (P), sulfur (S), chlorine (Cl), and some transition metals. For example, in the compound SF₆, sulfur has twelve valence electrons in its outermost shell, while in the compound PCl₅, phosphorus has ten valence electrons in its outermost shell.

To know more about octet rule, refer here:
https://brainly.com/question/30779148#
#SPJ11

The product that results from this nucleophilic acyl substitution reaction. 1. NaOCH₃ . H₃O+ is given below.

A reaction where particular set of chemicals changes into another form without changing their nuclei just the transfer or sharing of electrons and formation and breaking of bonds is called as chemical reaction.

First nucleophile(OCH₃-) attacks at one of the two carbonyl group to give ester and acid. Further ester undergoes hydrolysis to give Succinic acid. Succinic acid is the final product of this reaction:

Learn more about reaction on

https://brainly.com/question/11231920

#SPJ1

In an exothermic reaction, heat is releases heat the surroundings. The particles of the surroundings have rise freedom of motion and ÎSsurr therefore cools the surroundings.

When energy from the environment is absorbed as heat from the surroundings, an endothermic process takes place. An exothermic reaction, on the other hand, involves the release of energy from the system into the environment.

Heat is emitted during an exothermic process, therefore we may think of heat as a product. The opposite is true for endothermic reactions, and heat can be regarded as a reactant.

Any chemical process that takes heat from its surroundings is said to be endothermic. The reaction's activation energy comes from the energy that was absorbed. This kind of response is characterised by its icy sensation.

learn more about exothermic process

https://brainly.com/question/2924714

#SPJ1