Impact test is used to determine a materials notch toughness. The impact test is used to determine a material's notch toughness, which is its ability to withstand the formation and propagation of cracks or notches in the material under high-stress conditions. This test involves striking a notched specimen with a pendulum and measuring the energy required to fracture the specimen.
To know more about Impact test
https://brainly.com/question/13109634?
#SPJ11
A crawler tractor costs $650,000, has an estimated salvage value of $80,000, and has a 5-year life. Find the annual depreciation and book value at the end of each year using the double-declining-balance method of depreciation.
Answer: Therefore, the annual depreciation for each year using the double-declining-balance method is $228,000 for the first three years, $194,000 for the fourth year, and $0 for the fifth year. The book value at the end of each year is as follows: $422,000 at the end of year 1, $194,000 at the end of year 2, $228,000 at the end of year 3, $0 at the end of year 4, and $80,000 at the end of year 5.
Explanation: To calculate the annual depreciation using the double-declining-balance method, we first need to calculate the depreciation rate, which is double the straight-line depreciation rate. The straight-line depreciation rate is calculated as follows:
Depreciation rate = (Cost - Salvage value) / Useful life
Depreciation rate = ($650,000 - $80,000) / 5 years = $114,000 per year
Double-declining-balance depreciation rate = 2 x straight-line depreciation rate = 2 x $114,000 = $228,000 per year
Using this depreciation rate, we can calculate the annual depreciation and book value at the end of each year as follows:
Year 1:
Depreciation = $228,000
Book value = Cost - Depreciation = $650,000 - $228,000 = $422,000
Year 2:
Depreciation = $228,000
Book value = Cost - Depreciation = $650,000 - $228,000 - $228,000 = $194,000
Year 3:
Depreciation = $194,000
Book value = Cost - Depreciation = $650,000 - $228,000 - $194,000 = $228,000
Year 4:
Depreciation = $228,000
Book value = Cost - Depreciation = $650,000 - $228,000 - $194,000 - $228,000 = $0
Year 5:
Depreciation = $0
Book value = Salvage value = $80,000
The use of concrete was revolutionary since it could
a. Create buildings that could withstand weather
b. Create buildings that could be shaped different ways
c. Create roads that would not be broken as easily
d. Create a new ground level over old buildings
The use of concrete in construction was indeed revolutionary for several reasons, one of which was its ability to create a new ground level over old buildings. Before concrete, buildings were typically built on top of each other, leading to unstable and unsafe structures. However, with the invention of reinforcement concrete, architects and engineers were able to construct new floors and foundations without the need to demolish existing buildings.
For such more question on reinforcement
https://brainly.com/question/1483660
#SPJ11
2 people arguing about project, best to pay attention to:what is being said and whenwhat is being said who is saying it and time of physical mannerismstone of voice and physical mannerisms
When two people are arguing about a project, it is important to pay attention to both what is being said and how it is being said.
This includes not only the words being used, but also the tone of voice and any physical mannerisms that may accompany the conversation. For example, if one person is speaking in a raised or aggressive tone, it may indicate frustration or anger with the situation. Additionally, if either party is displaying physical mannerisms such as crossing their arms, tapping their foot, or rolling their eyes, it may indicate discomfort or disagreement with the conversation. By paying attention to both verbal and nonverbal cues, individuals can gain a better understanding of the underlying issues at play in the argument and work towards a resolution that benefits all parties involved.
To learn more about pay click the link below:
brainly.com/question/24183835
#SPJ11
Describe one way that software developers can ensure that the users are aware of any available updates for their products.
One way that software developers can ensure that users are aware of available updates for their products is through automated notifications.
Automated notifications can be set up through various channels, such as email, in-app pop-ups, or push notifications. For example, developers can create a pop-up window that appears when a user opens the software, notifying them of an available update and providing instructions on how to install it. Developers can also send push notifications to users’ mobile devices, reminding them to update the software when a new version is available.
Step 1: Integrate the notification system into the software's code during the development process. This ensures that the feature is available from the moment users begin using the product.
Step 2: Establish a server or database where update information will be stored, including version numbers, release dates, and a brief description of the changes in each update.
Step 3: Configure the software to periodically check for updates by connecting to the server or database. This check can occur when the software is launched, at regular intervals while it is running, or both.
Step 4: When an update is detected, the software will display a notification to the user. This notification can be a pop-up window, an alert in the system tray, or another unobtrusive method that informs the user without disrupting their workflow.
Step 5: Make it easy for users to act upon the notification. Provide a link or button within the notification that allows them to download and install the update quickly and seamlessly.
By incorporating an automatic update notification system, software developers can effectively keep users informed about the latest improvements and enhancements, ultimately leading to a better user experience and increased satisfaction with the product.
Learn more about update here : brainly.com/question/11142488
#SPJ11
Print the head of the homelessness DataFrame.
To print the head of the homelessness DataFrame, you can use the head() function in pandas. The head() function will return the first five rows of the DataFrame by default. Here's an example code snippet:
```python
import pandas as pd
# Assuming the DataFrame is already loaded into a variable called 'homelessness'
print(homelessness.head())
```
This will print the first five rows of the homelessness DataFrame. If you want to print a different number of rows, you can pass the number as an argument to the head() function. For example, `homelessness.head(10)` will print the first ten rows.
To know more about DataFrame
https://brainly.com/question/28190273?
#SPJ11
What can a Solutions Architect do to ensure that the instances marked unhealthy will be terminated and replaced?
As a solutions architect, there are several things that can be done to ensure that instances marked as unhealthy are terminated and replaced in an automated and efficient manner, such as using auto-scaling, implementing health checks, configuring CloudWatch alarms, using AWS Lambda, monitoring instance replacements, etc.
Autoscaling is a service that automatically scales up or down the number of instances based on demand or load. When an instance is marked as unhealthy, auto scaling can replace it with a new healthy one automatically. Health checks are used to monitor the health of instances in a load-balanced environment. By implementing health checks, the solution architect can detect when an instance is unhealthy and automatically remove it from the load balancer.
Learn more about the solution architect here.
https://brainly.com/question/30457069
#SPJ4
The most effective security is _____.Select an answer:redundant securityproactive securitylayered securityreactive
The most effective security is proactive security. The Option B.
How is proactive security most effective security?Proactive security involves actively identifying and addressing potential security risks before they can cause harm. This approach allows organizations to stay ahead of potential threats and implement preventive measures to mitigate them.
By being proactive, businesses can avoid costly and damaging security breaches, protect sensitive data,and safeguard their reputation. It is very crucial in ensuring the highest level of protection against security threats.
Read more about proactive security
brainly.com/question/14274888
#SPJ1
You take an incident report from a user trying to access a REPORT.docx file on a SharePoint site. The file has been replaced by a REPORT.docx.QUARANTINE.txt file containing a policy violation notice. What is the most likely cause?
Resolves domain names to corresponding IP addresses (Wallace 52)
The process of resolving domain names to corresponding IP addresses is known as domain name resolution. This involves converting human-readable domain names, such as www.example.com, into numerical IP addresses that computers can understand. This is necessary for computers to connect to websites, as they use IP addresses to identify and communicate with each other on the internet. Domain name resolution is typically handled by Domain Name System (DNS) servers, which maintain a database of domain names and their corresponding IP addresses.
To know more about resolution
https://brainly.com/question/30753488?
#SPJ11
According to industry experince and laboratory test, what membrane stress is required to cause failure due to brittle fracture?
A) 6ksi
B) 7ksi
C) 10ksi
D)12ksi
Question: "According to industry experince and laboratory test, what membrane stress is required to cause failure due to brittle fracture?"
According to industry experience and laboratory tests, the membrane stress required to cause failure due to brittle fracture typically ranges from 6ksi to 12ksi. Therefore, any of the given options A, B, C, or D could potentially be the correct answer, depending on the specific materials and conditions involved.
Learn more about brittle fracture: https://brainly.com/question/31668674
#SPJ11
How far can joists normally span? What is needed if the span needs to be larger?
The maximum span of joists will depend on several factors, such as the size of the joist, the spacing between joists, and the load they will support. Generally, a 2x6 joist can span up to 10 feet, while a 2x10 joist can span up to 16 feet. However, if the span needs to be larger, additional support such as beams or columns may be necessary.
It's also important to consider the specific building code requirements in your area as well as any load-bearing requirements for the intended use of the structure. If you need specific calculations for your project, it's best to consult with a structural engineer or a qualified building professional. I'm sorry, but I cannot provide any information regarding the number 31607749, as it is not related to the question at hand.
to know more about joists:
https://brainly.com/question/30027732
#SPJ11
Which requirements must be met in order for a Solutions Architect to specify that an Amazon EC2 instanceshould stop rather than terminate when its Spot Instance is interrupted?
The following conditions must be satisfied in order for a Solutions Architect to designate that an Amazon EC2 instance cease operations rather than terminate if its Spot Instance is interrupted:
A Spot Instance must be active on the EC2 instance.Amazon EC2 must terminate the Spot Instance.Before it is interrupted, the Spot Instance should have been running for at least one minute.Since instances backed by instance stores cannot be stopped, the instance must be EBS-backed.Both an instance store volume and a root device EBS volume must be present on the instance.Learn more about EC2 Instance, here:
https://brainly.com/question/30713420
#SPJ4
t has been stated that the thicker the sheet metal, the higher is the curve in the forming-limit diagram. explain why.
The thicker the sheet metal, the higher the curve in the forming-limit diagram because thicker sheets require more force to bend, resulting in a greater amount of strain hardening.
Why does the forming-limit diagram show a higher curve for thicker sheet metal?Generally, thicker sheet metal requires more force to bend, which leads to a higher degree of strain hardening. This means that the material becomes stronger and less ductile as it is bent, resulting in a higher curve on the forming-limit diagram.
The forming-limit diagram is a useful tool for predicting the maximum amount of deformation that a given material can undergo without experiencing defects or failure. It is important to take into account the thickness of the material when using the forming-limit diagram to ensure that the predicted results are accurate and appropriate for the intended application.
Read more about sheet metal
brainly.com/question/29191472
#SPJ4
Dynamically assigns IP address information (for example, IP address, subnet mask, DNS server's IP address, and default gateway's IP address) to a network device (Wallace 52)
Dynamic Host Configuration Protocol (DHCP) is a network protocol that allows network administrators to automatically assign IP address information to network devices. DHCP is a centralized approach that manages the allocation of IP addresses, subnet masks, DNS server's IP addresses, and default gateway's IP addresses to client devices.
In this scenario, DHCP dynamically assigns IP address information to a network device named Wallace 52.The DHCP server is responsible for providing IP addresses to the client devices that request them. When a network device such as Wallace 52 connects to the network, it sends a broadcast request to the DHCP server for an IP address. The DHCP server receives the request and assigns an available IP address from a pool of addresses that have been configured for the network.In addition to the IP address, the DHCP server also assigns other important information to the client device, including the subnet mask, DNS server's IP address, and default gateway's IP address. The subnet mask determines the network portion of the IP address and the host portion. The DNS server's IP address is used for name resolution, and the default gateway's IP address is used for routing packets outside of the local network.Overall, DHCP is an efficient and automated approach to managing IP address assignments on a network. By dynamically assigning IP address information to devices like Wallace 52, administrators can reduce the administrative burden of managing IP addresses manually and ensure that all devices on the network have accurate and up-to-date information.For such more question on protocol
https://brainly.com/question/28811877
#SPJ11
NANCY - REALLY REVIEW THIS BUSINESS WITH THE SOCKETS in the book where marked
It seems like you would like Nancy to really review the business aspects related to sockets in the book, focusing on the marked sections.
HOW NANCY -- REALLY REVIEWED THIS BUSINESS WITH THE SOCKETS?
1. Locate the marked sections in the book that specifically discuss business and sockets.
2. Read and analyze the information provided in these sections to gain a clear understanding of the topic.
3. Take notes on important points and any questions that may arise during the review.
4. Look for connections or patterns in the information to draw conclusions about the business aspects of sockets.
5. Summarize the findings and consider any recommendations or improvements for the business based on the review.
By following these steps, Nancy can conduct a thorough review of the business aspects related to sockets in the marked sections of the book.
to know more about business:
https://brainly.com/question/15826771
#SPJ11
What are the typical spans for concrete Beam-and-Girder Systems?
The typical spans for concrete Beam-and-Girder Systems can vary depending on the specific design and load requirements, but they typically range from 20 to 60 feet. These systems are commonly used in construction for buildings, bridges, and other structures that require strong, durable support. The beams and girders work together to distribute the weight of the structure and provide stability. It is important to properly design and construct these systems to ensure safety and longevity of the structure.
Beam-and-Girder Systems: Beam-and-Girder systems are a kind of structural system that supports the structure with concrete beams and girders.
Spans: The distance between two supports or columns is referred to as the spans of a Beam-and-Girder system.
spans' range: For concrete Beam-and-Girder Systems, the average range of spans is between 20 and 60 feet.
The type of concrete used, the structure's load capacity, and the overall design requirements are all factors that determine the spans of Beam-and-Girder systems.
In summary, depending on the exact design and load requirements, the usual spans for concrete Beam-and-Girder Systems range from 20 to 60 feet.
For the structure to be safe and last a long time, proper design and construction are crucial.
Learn more about Beam-and-Girder Systems:
https://brainly.com/question/29071921
#SPJ11
What lives at layer 3 (the network layer) of the OSI model?
Layer 3 of the OSI (Open Systems Interconnection) model, known as the network layer, is responsible for providing end-to-end communication between hosts in different networks.
The network layer is responsible for routing and forwarding data packets across different networks, as well as handling addressing and logical connectivity.
The main entities that live at layer 3 (the network layer) of the OSI model include:
Routers: Routers are network devices that operate at the network layer and are responsible for forwarding data packets between different networks. They use routing tables and protocols to determine the best path for data packets to reach their destination across multiple networks.
IP (Internet Protocol): IP is a network layer protocol that provides logical addressing and routing functionality. It is responsible for assigning unique IP addresses to devices on a network, and for routing data packets based on those IP addresses.
ICMP (Internet Control Message Protocol): ICMP is a network layer protocol that is used for sending error messages and operational information about network conditions. It is often used for diagnostic purposes, such as ping and traceroute, to check the connectivity and status of network devices.
Network Addressing: Layer 3 is also responsible for assigning and managing IP addresses, which are used to uniquely identify devices on a network.
Subnetting and VLANs: Layer 3 may also involve subnetting and VLANs (Virtual Local Area Networks), which are used for network segmentation and management to improve efficiency and security.
In summary, layer 3 of the OSI model includes routers, IP, ICMP, network addressing, and other protocols and technologies that are responsible for routing, addressing, and logical connectivity in a network.
learn more about OSI here:
https://brainly.com/question/25404565
#SPJ11
27. which of the following are limitations of binder jetting technology? a. binder jetting creates fragile parts that must be cured or sintered in order to achieve durable material properties. b. binder jetting is a relatively expensive am process. c. binder jetting allows for a very limited set of colors. d. all of the above are limitations of binder jetting.
The limitations of binder jetting technology are:
a. binder jetting creates fragile parts that must be cured or sintered in order to achieve durable material properties.b. binder jetting is a relatively expensive am process.c. binder jetting allows for a very limited set of colors. What are the limitations of binder jetting technology?Binder jetting technology creates fragile parts that must be cured or sintered in order to achieve durable material properties. This can add extra time and cost to the manufacturing process.
It is a relatively expensive AM process compared to other options such as FDM or SLA. Its jetting allows for a limited set of colors, which may be a concern for some applications. Despite these limitations, binder jetting can still be a useful AM technology for certain applications, such as creating large, complex parts or for creating multiple copies of the same part quickly and efficiently.
Read more about jetting technology
brainly.com/question/7788080
#SPJ4
In a rule-based access control model, can a subject negotiate with the data owner for access privileges? Why or why not?
In a rule-based access control model, a subject cannot negotiate with the data owner for access privileges. This is because access privileges are determined by the rules and policies set in place by the data owner, and these rules are not open to negotiation by individual subjects. The data owner has the ultimate authority over who is granted access and what level of access they are given, based on their role and responsibilities within the organization. Therefore, negotiation is not a part of the process in a rule-based access control model.
With the rule-based model, a security professional or system administrator sets access management rules that can allow or deny user access to specific areas, regardless of an employee's other permissions.
To know more about rule-based access control model
https://brainly.com/question/14014672
#SPJ11
What methods of inspection must be considered when establishing inspection frequencies?
A) On-stream core sample inspection
B) On-stream nondestructive inspection
C) In-service aerial inspection
D) In-service groundwater inspection
When establishing inspection frequencies, various methods of inspection must be considered to ensure the reliability and safety of the equipment or facility.
These methods may include on-stream core sample inspection, on-stream nondestructive inspection, and in-service aerial inspection. It is also important to consider factors such as the age and condition of the equipment, the environment in which it operates, and the potential consequences of failure. In-service groundwater inspection may also be necessary depending on the specific application and potential risks. Ultimately, a comprehensive inspection plan should be developed to ensure that all necessary methods of inspection are utilized at appropriate intervals.
Learn more about methods of inspection: https://brainly.com/question/30272656
#SPJ11
_____________ is the lowest published altitude between radio fixes which assures acceptable nav signal coverage and meets obstacle clearance requirements between those fixes.
The Minimum Enroute Altitude (MEA) is the lowest published altitude between radio fixes which assures acceptable navigation signal coverage and meets obstacle clearance requirements between those fixes. MEA ensures both adequate signal reception from navigation aids (NAVAIDs) and sufficient clearance from terrain and man-made obstacles, allowing for safe flight between the specified radio fixes.
Charles Darwin suggested that all organism on earth have descended from a common ancestor. The modern technology-enabled humans to sequence the genome of an organism and compared them with each other.
To know more about Minimum Enroute Altitude (MEA)
https://brainly.com/question/6677338?
#SPJ11
8. Which protocol supports a secure connection to a remote host via terminal emulation software?
a. Telnet
b. SSH
c. FTP
d. SFTP
The protocol that supports a secure connection to a remote host via terminal emulation software is SFTP, which stands for Secure File Transfer Protocol. SFTP is a secure version of the FTP (File Transfer Protocol) that allows for encrypted data transfer between a client and server.
Option D is correct
For such more question on protocol
https://brainly.com/question/28811877
#SPJ11
Why are baseboard electric heaters placed on the outer walls of a room?
Baseboard electric heaters are placed on the outer walls of a room for several reasons, including:
1. Heat distribution: By placing the heaters on the outer walls, the heat is distributed more evenly throughout the room, as it rises from the baseboards and travels along the walls.
2. Minimizing heat loss: The outer walls of a room are typically colder, as they are in contact with the outside environment. Placing the heaters on the outer walls helps to minimize heat loss and maintain a consistent temperature.
3. Maximizing floor space: Installing baseboard electric heaters on the outer walls also helps to maximize floor space in the room, as furniture and other objects can be placed against the walls without obstructing the heaters.
4. Reducing drafts: Baseboard heaters work well at combating drafts that may enter through doors, windows, or other gaps in the outer walls. By placing the heaters on the outer walls, they can counteract these drafts more effectively.
5. Simplifying installation: Finally, placing the heaters on the outer walls simplifies the installation process, as the wiring can be run more easily along the walls and to the electrical supply.
To know more about electric heaters
https://brainly.com/question/15629252?
#SPJ11
04-004 - Definition of a formula
A formula is a mathematical expression or equation that uses symbols, numbers, and operations to describe a relationship between variables. In other words, it is a set of instructions or rules that can be used to calculate a value based on given inputs or variables. Formulas are used in various fields such as mathematics, physics, chemistry, engineering, and finance to solve problems and make predictions. A formula can be as simple as adding two numbers together or as complex as a multi-step equation with multiple variables. Overall, a formula is a fundamental concept in mathematics and is essential for solving many problems in different fields of study.
To know more about mathematical expression
https://brainly.com/question/30350742?
#SPJ11
HOW MANY TIMES PROPERTIES HAVE BEEN LEASED BY JOHN KAY?
write a sql statement. LNO P NO RENTE RENT PAID PAYME START DAT FINISH DA ----- 10024 PA14 CR62 10075 PL94 CR76 10012 PG21 CR74 10022 PG21 CR62 10023 PG4 CR76 10028 PA14 CR62 10029 PG21 CR12 10030 PD12 CR96 10032 PD12 CR96 10033 PD14 CR12 10038 PA14 CR12 650 VISA 01-JUN-12 01-NOV-12 400 CASH 01-JAN-12 01-AUG-12 700 CHK 01-JUN-12 30-JUN-12 680 MC 01-OCT-12 30-OCT-12 350 MC 01-SEP-12 01-OCT-12 450 CHK 01-JAN-12 01-JUL-12 700 15-MAR-21 15-MAY-21 450 VISA 01-JAN-13 01-FEB-13 550 VISA 01-OCT-13 05-OCT-13 450 MC 01-JAN-17 05-JAN-17 550 MC 20-JAN-17 25-JAN-17 L_NO P_NO RENTE RENT_PAID PAYME START_DAT FINISH_DA 10040 PA01 CR30 10042 PA14 CR30 10014 PL21 CR30 10018 PL21 CR10 10025 PA 14 CR10 550 CHK 05-JUN-20 10-AUG-20 450 CHK 15-DEC-20 10-JAN-21 450 CHK 15-DEC-20 10-JAN-21 650 VISA 15-JAN-21 20-FEB-21 650 VISA 15-MAR-21 20-MAR-21
Where the name of the table is called "LEASES" and the column of the lessee is called "LESSEE", the SQL statement to to count the number of times the properties hve been leased by John K ay is:
SELECT COUNT (*)
FROM LEASES
WHERE LESSEE = 'John Kay';
What is the explanation for the above SQL Statement?The above SQL Statement assumes that the lessee's full name is 'John Kay' and that it is spelled the same way in every lease record.
If the name is stored in separate clumns for first and last name, or if there are errors in the spelling of the name, then, it is important for the query to be adjusted accordingly.
Learn more about SQL Statements:
https://brainly.com/question/30952153
#SPJ4
Mechanical damage to floating roof perimeter seals shall be repaird or replaced. How buckled parts handled?
A) They shall be replaced
B) They may be straightened in place
C) They may be heated and bent back into position
D) They may be removed straightened and re-installed
Hi! Mechanical damage to floating roof perimeter seals should be repaired or replaced. Regarding buckled parts, they may be handled in the following ways:
A) They shall be replaced
B) They may be straightened in place
C) They may be heated and bent back into position
D) They may be removed, straightened, and re-installed
Your answer will depend on the specific situation and the severity of the mechanical damage. Consult with a professional to determine the most appropriate method for your specific case.
Learn more about Mechanical damage: https://brainly.com/question/2622341
#SPJ11
What is the difference between security group and role-based permissions management?
Security groups and role-based permissions management are both methods for controlling access to resources in a system, but they differ in their approach.
Security groups are a collection of users or entities that have the same level of access to a resource. They are typically created based on job function or department, and can be used to grant or revoke access to resources as needed. For example, a security group might be created for all employees in the finance department, and they would have access to specific financial systems and data.
Role-based permissions management, on the other hand, is a more granular approach to access control that assigns specific permissions to individual users based on their role or job function. This means that each user can have a unique set of permissions based on their specific needs. For example, a manager might have access to view and approve reports, while a regular employee might only have access to view their own reports.
In summary, security groups provide a broad level of access control based on job function or department, while role-based permissions management provides a more specific and individualized approach to access control based on user roles or job functions. Both methods are important for ensuring security and protecting sensitive data in a system.
To know more about Security
https://brainly.com/question/15278726?
#SPJ11
Corrosion has been found on a tank bottom. The calculated remaining life on a tank bottom is 30 years. What is the maximum interval for this internal inspection?
A) 10 years
B) 15 years
C) 20 years
D) Inspector judgement
The maximum interval for internal inspection of a tank with a calculated remaining life of 30 years would depend on the industry standards and regulations, as well as the inspector's judgment. However, a common guideline for tank inspections is to conduct them at least every 10 years, so the answer would be A) 10 years.
Learn more about inspection years: https://brainly.com/question/31556819
#SPJ11
Entries in the alarm log book are written by all of the following, EXCEPT:
A. Location and type of audio/visual alarm devices
B. Daily (non-alarm) entries of Fire Safety Director on duty time
C. Off line details
D. Smoke Detector alarm details
Offline information The alarm log book is a record of every alarm-related event that takes place in a certain facility.
The location and kind of audio/visual alarm equipment, daily (non-alarm) notes of the Fire Safety Director's on-duty hours, and information about smoke detector alarms are all common entries in the alarm log book.
However, they exclude off-line information, such as repair and maintenance activities, testing, and troubleshooting, which is relevant to the upkeep and operation of the alarm system.
Find out more about alarm systems at:
https://brainly.com/question/30717616
#SPJ4
Which test is not an Annual requirement according to FDNY guidelines for fire alarms?
A. Central station connection.
B. Manual pull stations.
C. Fail safe release.
D. Public Address audibility on each floor
According to FDNY guidelines for fire alarms, the test that is not an annual requirement is:
Public Address audibility on each floor
What to Expect The fire alarm function test includes but is not limited to: • Testing of fire suppression valve/flow monitoring. Testing of all initiating devices (smoke, heat detectors, pull stations). Testing of duct detectors and associate AHU shut-down. Verification of all annunciation devices.
The other tests, such as Central station connection (A), Manual pull stations (B), and Fail safe release (C) are required to be conducted annually according to FDNY guidelines.
To know more about FDNY
https://brainly.com/question/16593143?
#SPJ11
