When two point charges are a distance d apart, the electric force that each one feels from the other has magnitude F. In order to make this force twice as strong, the distance would have to be changed to
A) √2d
B) d/√2
C) d/4
D) 2d
E) d/2

Referring to Question 13, after the plates are pulled a small distance apart, the energy stored in the capacitor decreases.

As the distance between the plates of a capacitor increases, the capacitance decreases, and so does the energy stored in the capacitor. This is because the capacitance of a capacitor is directly proportional to the area of the plates and inversely proportional to the distance between them. Therefore, when the distance between the plates is increased, the capacitance decreases, and the energy stored in the capacitor decreases as well. It is important to note that the energy stored in a capacitor is given by the formula E = 1/2 CV^2, where E is the energy stored, C is the capacitance, and V is the potential difference across the plates of the capacitor. As the capacitance decreases, the energy stored in the capacitor also decreases, even if the potential difference across the plates remains the same.
In conclusion, when the plates of a capacitor are pulled a small distance apart, the energy stored in the capacitor decreases due to the decrease in capacitance. This is because the capacitance of a capacitor is directly proportional to the area of the plates and inversely proportional to the distance between them.

Learn more about capacitor here: https://brainly.com/question/17511060

#SPJ11

Answer: work done is: 700 J.

the formula of work done is : work=force × distance

here, the distance car being pulled is 56.0 m and the force applied on it is 12.5 n. so the work done to pulled a car id : = 12.5 × 56.0

=700.0 j.

3 L of oxygen gas kept at 3 °C and 2 atm pressure has a total translation kinetic energy of 10 J.

By adding the two varieties of kinetic energy, it is possible to calculate the object's total kinetic energy. Remember that the product of the object's mass and the square of its linear velocity (around its centre of mass) and splitting the result by two gives the object's translational kinetic energy.

Kinetic Translational Energy. No matter their mass, all gas molecules at a particular temperature have the same overall translational speed, according to the calculation.

To know more about kinetic energy visit :

https://brainly.com/question/26472013

#SPJ1

Answer:

False.

The fundamental frequency of a person's speech, also known as the pitch or F0, can vary depending on various factors such as age, gender, emotion, and cultural background. However, studies have shown that the fundamental frequency tends to increase, rather than decrease, when a person is angry or excited. This increase in pitch during intense emotions is thought to be due to changes in the tension of the vocal cords and increased respiratory activity.

Explanation:

The formula for calculating force is:

force = mass x acceleration

The force is 14 Newtons (N).

What is force?

Force is a physical quantity that describes the interaction between two objects, resulting in the acceleration of one or both objects. Force can cause a stationary object to move or change its direction, or it can alter the speed or direction of a moving object. Force is measured in the unit of Newtons (N) and is represented by the symbol F.

In this case, we have a mass of 3.5 kg and an acceleration of 4 m/sec². To find the force, we simply multiply the two values:

force = 3.5 kg x 4 m/sec²

To calculate this, we can use a calculator or do the multiplication by hand. Here's how to do it step-by-step:

Write down the values given in the problem:

mass = 3.5 kg

acceleration = 4 m/sec²

Write down the formula for force:

force = mass x acceleration

Substitute the values given in the problem into the formula:

force = 3.5 kg x 4 m/sec²

Multiply the two values:

force = 14 kg m/sec²

Simplify the unit by replacing kg m/sec² with Newtons (N), which is the unit of force:

force = 14 N

Therefore, the force is 14 Newtons (N).

To know more about force go to the given link;

brainly.com/question/12785175

#SPJ

The unknown mass given the force of the elevator on the 5.0-kg mass is 80 N up is 3.3 kg. The correct option is 1.

To determine the unknown mass, we'll use the following terms: force, mass, acceleration, and Newton's second law (F = m * a).

First, we'll find the net force acting on the 5.0-kg mass:
Net force = Force of elevator - Gravitational force (F = m * g, g = 9.8 m/s²)
Net force = 80 N - (5.0 kg * 9.8 m/s²) = 80 N - 49 N = 31 N

Since the elevator is accelerating downward, the net force should be negative, thus:
Net force = - (5.0 kg * a)
-31 N = - (5.0 kg * 1.0 m/s²)
31 N = 5.0 kg * 1.0 m/s²

Now, let's consider the system of the unknown mass (m) and the 5.0-kg mass. The total force acting on the system is the gravitational force:
Total force = (5.0 kg + m) * 9.8 m/s²

As the net force is 31 N, we can write:
31 N = (5.0 kg + m) * 9.8 m/s²
m = (31 N / 9.8 m/s²) - 5.0 kg ≈ 3.16 kg

The closest answer is 1) 3.3 kg.

For more such questions on Force.

https://brainly.com/question/8125804#

#SPJ11

Our brain uses the difference in phase between the two sound signals received by our ears to localize low frequency sound sources.

Step-by-step explanation:
1. Low frequency sounds have longer wavelengths and are less directional.
2. Our ears receive these low frequency sound signals.
3. The phase difference between the sound signals is the difference in arrival times at each ear.
4. Our brain processes this phase difference to determine the location of the sound source.

In summary, our brain uses the phase difference between the two sound signals received by our ears to localize low frequency sound sources.

To know more about sound signals and sources - https://brainly.com/question/31577791

#SPJ11

Delta waves have a lower frequency than alpha waves, as they oscillate at a slower rate.

Alpha waves and delta waves are two types of brainwaves that can be measured using an electroencephalogram (EEG) device.

Alpha waves are typically measured in the frequency range of 8 to 12 Hz (cycles per second) and are most commonly observed when a person is in a relaxed and calm state, such as during meditation or when closing their eyes and relaxing. They are also associated with a state of wakeful relaxation and can be seen when a person is daydreaming or engaged in creative activities.

Delta waves, on the other hand, are typically measured in the frequency range of 0.5 to 4 Hz and are the slowest brainwave frequency. They are commonly observed during deep sleep, and are also associated with other states of unconsciousness, such as during anesthesia or coma.

Therefore, delta waves have a lower frequency than alpha waves, as they oscillate at a slower rate. Alpha waves have a frequency of 8-12 Hz while delta waves have a frequency of 0.5-4 Hz.

To learn about frequency click:

https://brainly.com/question/1292129

#SPJ4

For the time it takes for the mass to move from the surface to the center, we get:

t = √(2

What is Work Done?

In physics, work is defined as the amount of energy transferred when a force is applied over a certain distance. Work done is the measure of the energy transferred when a force is exerted on an object and that object moves a certain distance as a result of that force.

At the center of the Earth, the gravitational force on the mass becomes zero because the mass is equally attracted in all directions. Therefore, at the center of the Earth, the kinetic energy of the mass is equal to the potential energy gained as it moves from the surface to the center. This can be expressed as:

(1/2) * m * [tex]v^{2}[/tex]= 2/3 * G * π * p * m * R[tex]E^{2}[/tex]

Solving for v, we get:

v = sqrt(8/9 * G * π * p * R[tex]E^{2}[/tex])

f. To determine the time it takes the mass to move from the surface to the center, we need to use the work-energy principle:

W = ΔK

where W is the work done by gravity, ΔK is the change in kinetic energy of the mass, and K is the kinetic energy.

The work done by gravity is given by the expression derived in part (d):

W = 2/3 * G * π * p * m * R[tex]E^{2}[/tex]

The change in kinetic energy is given by:

ΔK = (1/2) * m * [tex]v^{2}[/tex] - (1/2) * m

= (1/2) * m *[tex]v^{2}[/tex]

Substituting the expressions for W and ΔK, we get:

2/3 * G * π * p * m * R[tex]E^{2}[/tex] = (1/2) * m * [tex]v^{2}[/tex]

Solving for the time it takes for the mass to move from the surface to the center, we get:

t = √(2

Learn more about Work Done

https://brainly.com/question/25573309

#SPJ1

The property that is detectable for both dark matter and the supermassive black hole at the center of the Milky Way is their gravitational influence on surrounding matter.

Both dark matter and the supermassive black hole affect the motion of nearby stars and galaxies due to their gravitational pull, even though they cannot be directly observed through electromagnetic radiation like visible light.

By studying the movement and behavior of objects in their vicinity, scientists can infer the presence and properties of both dark matter and the supermassive black hole.

Thus, the property is their gravitational influence on surrounding matter.

To know more about supermassive black hole click here:

https://brainly.com/question/16470114

#SPJ11

A 0.25 m radius grinding wheel  rotating with a constant angular speed of 2.0 rad/s has a  tangential speed at the edge of the wheel of 0.5 m/s.

The tangential speed at the edge of the grinding wheel can be found using the formula:

Tangential speed = radius x angular speed

Plugging in the given values, we get:

Tangential speed = 0.25 m x 2.0 rad/s
Tangential speed = 0.5 m/s

Therefore, the tangential speed at the edge of the wheel is 0.5 m/s.

Alternatively, to find the tangential speed at the edge of the grinding wheel, we'll use the following formula:

Tangential Speed (v) = Radius (r) × Angular Speed (ω)

Given, Radius (r) = 0.25 m and Angular Speed (ω) = 2.0 rad/s.

Now, let's calculate the tangential speed:

v = r × ω
v = 0.25 m × 2.0 rad/s
v = 0.5 m/s

So, the tangential speed at the edge of the wheel is 0.5 m/s.

More on tangential speed: https://brainly.com/question/15002527

#SPJ11

Answer:an increase (or decrease) in the frequency of sound, light, or other waves as the source and observer move toward (or away from) each other.

Explanation:

To solve this problem, we can use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

First, we need to determine the number of moles of water in the container. The mass of 9.0 g of water is:

9.0 g / 18 g/mol = 0.5 mol

The volume of the container is 2.0 L. We can assume that water behaves as an ideal gas at high temperatures and low pressures, so we can use the ideal gas law to solve for the pressure:

P = nRT/V

Substituting the values we have:

P = (0.5 mol) x (0.082 L-atm/mol-K) x (500 + 273 K) / 2.0 L

Simplifying:

P = 23.4 atm

Therefore, the pressure inside the container is 23.4 atm.

To know more about ideal gas law :

https://brainly.com/question/4147359

#SPJ11

To find the wrecking ball's speed at the lowest point which is suspended from a 5.0 m long cable that makes a 30 degree angle with the vertical. The ball is released and swings down.

To solve this problem, we can use conservation of energy. At the highest point, all of the ball's energy is potential energy (PE=mgh), where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the ball above its lowest point. At the lowest point, all of the ball's energy is kinetic energy (KE=1/2mv^2), where v is the speed of the ball.

Since energy is conserved, we can set the initial potential energy equal to the final kinetic energy:

mgh = 1/2mv^2

We can cancel out the mass m from both sides, and solve for v:

v = sqrt(2gh)

To find h, we need to use trigonometry to find the height of the lowest point above the ground. The horizontal distance from the point where the ball is released to the point where it reaches its lowest point is given by:

5.0 m * sin(30 degrees) = 2.5 m

The vertical distance from the release point to the lowest point is given by:

5.0 m * cos(30 degrees) = 4.3 m

Therefore, the total height of the lowest point above the ground is:

h = 4.3 m - 0.5 m = 3.8 m

(where we subtract 0.5 m because the ball has a radius of 0.5 m)

Now we can plug in the values for g and h and solve for v:

v = sqrt(2 * 9.81 m/s^2 * 3.8 m) = 3.1 m/s

Therefore, the answer is D) 3.1 m/s.

liquids with different specific heat capacities will require different amounts of heat energy to increase their temperature by the same amount, resulting in different DT values.

A. The DT (change in temperature) of a liquid is expected to depend on the number of pulses of heat energy transferred (Q). If more heat energy is transferred to the liquid, then its temperature will increase by a larger amount, resulting in a larger DT.

B. The DT of a liquid is expected to depend on the mass (m) of liquid in the cup. If there is more liquid in the cup, then it will require more heat energy to increase its temperature by the same amount as a cup with less liquid. Thus, the DT is expected to be smaller for a cup with a larger mass of liquid.

C. The DT of a liquid is expected to depend on the kind of liquid. Different liquids have different specific heat capacities, which is the amount of heat energy required to raise the temperature of a unit mass of the substance by one degree Celsius. Thus, liquids with different specific heat capacities will require different amounts of heat energy to increase their temperature by the same amount, resulting in different DT values.

To learn more about increase visit:

https://brainly.com/question/2285058

#SPJ11

The correct answer is c. 2.

This is because power is equal to torque multiplied by angular velocity. The torque required by the ice cream machine remains constant regardless of the radius at which it is applied, but the angular velocity changes.

Since the operator is applying the torque at half the radius, the angular velocity is doubled to maintain the same amount of work. This means that the power expended by the operator is also doubled, resulting in an answer of 2 times the power.
When the operator applies the same torque at half the radius, they must apply twice the force to maintain the same torque. Since power is the product of force and velocity, and the operator is applying the force in the same amount of time, the power expended by the operator is 2 times greater.

To know about Torque please click:-

https://brainly.com/question/19247046

#SPJ11

Location of an 8.4-kg mass to make moment of inertia about z-axis zero for a 4.2-kg mass at (3.0, 4.0) m.

What is the location for a second mass to make moment of inertia about the z-axis zero?

To find the location where the moment of inertia about the z-axis is zero, we need to place the second mass such that the center of mass of the two masses lies on the z-axis.

The center of mass of the two masses can be found using the following formula:

xcm = (m1x1 + m2x2)/(m1 + m2)

where

The x-coordinate of the centre of mass is denoted by xcm.

The first object's mass is m1.

x1 is the x-coordinate of the first object,

The mass of the second object is m2.

x2 is the x-coordinate of the second object.

Given:

m1 = 4.2 kg

x1 = 3.0 m

m2 = 8.4 kg

x2 = ?

To find x2, we need to set the x-coordinate of the center of mass equal to zero (since we want the center of mass to lie on the z-axis):

xcm = (m1x1 + m2x2)/(m1 + m2) = 0

Solving for x2, we get:

x2 = -(m1/m2) x1

Substituting the given values, we get:

x2 = -(4.2 kg)/(8.4 kg) * 3.0 m = -1.5 m

Therefore, the 8.4-kg mass should be placed at (-1.5, 0) m to make the moment of inertia about the z-axis zero.

To learn more about moment of inertia, visit: https://brainly.com/question/14460640

#SPJ1

The spring is stiffer and requires more force to stretch or compress, while a lower spring constant means that the spring is more flexible and requires less force.

The potential energy (PE) of a mass-spring system is given by:

PE = (1/2)kx^2

where k is the spring constant and x is the displacement of the mass from its equilibrium position.

To find the spring constant, we can rearrange the equation as follows:

k = (2PE) / x^2

To use this formula, you need to know the potential energy of the system at a specific displacement and the displacement itself. Once you have those values, you can plug them into the formula to find the spring constant.

Note that the spring constant represents the stiffness of the spring and is measured in units of force per unit length (e.g., N/m). It tells us how much force is required to stretch or compress the spring by a certain amount. A higher spring constant means that the spring is stiffer and requires more force to stretch or compress, while a lower spring constant means that the spring is more flexible and requires less force.

To learn more about equilibrium visit:

https://brainly.com/question/30694482

#SPJ11

The frictional force of the floor on a large suitcase is least when the suitcase is:
Your answer: The frictional force of the floor on a large suitcase is least when the suitcase is rolling on its wheels. his is because static friction, which is the force that keeps the suitcase from moving when it is at rest, is generally greater than kinetic friction, which is the force that opposes the motion of the suitcase when it is moving. Therefore, once the suitcase overcomes the static friction and begins to move, the frictional force of the floor on the suitcase decreases.

1. Understand the different types of friction: static friction, kinetic friction, and rolling friction.
2. Recognize that when a suitcase is rolling, it experiences rolling friction, which is typically less than static and kinetic friction.
3. Identify that when the suitcase is on its wheels, it is rolling and therefore experiencing the least amount of frictional force from the floor.

To know more about static friction and kinetic frcition:

https://brainly.com/question/30886698

#SPJ11

The sum of the separate components' angular momenta determines the overall angular momentum of the man-plus-disk system, which is

[tex]L_{total}=1520\ kg.m^{2/s}[/tex].

A measure of an object's resistance to changes in motion is called momentum. It is the result of the product of the mass and the velocity of an item, and it is equal to the mass times the velocity. Momentum is commonly denoted by the letter "p" and is a vector quantity, meaning it has both a magnitude and a direction. Because it is a conserved quantity, a system's overall momentum will remain constant both before and after a collision.

The sum of the angular momenta of a system's various components determines its overall angular momentum. The man and the disc are the two halves of this man-plus-disk system.

The man's angular momentum can be calculated as follows:

[tex]L_{man} = I_{man} * \omega[/tex]

where [tex]I_{man}[/tex] is the man's moment of inertia and is the disk's angular velocity.

It is possible to compute the man's moment of inertia as follows:

[tex]I_{man} = m*r^2[/tex]

where r is the disk's radius and m is the man's mass.

As a result, the man's angular momentum is:

[tex]L_{man} = (m * r^2) * \omega\\\\L_{man} = (70.0 kg * (4.00 m)^2) * (0.500 rev/s)\\\\L_{man} = 560 kg. m^{2/s}[/tex]

Calculations for the disk's angular momentum are as follows:

[tex]L_{disk} = I_{disk} * \omega[/tex]

where [tex]I_{disk}[/tex] is the disk's moment of inertia and is the disk's angular velocity.

You can determine the disk's moment of inertia by using the formula:

[tex]I_{disk} = (1/2) * m * r^2[/tex]

where r is the disk's radius and m is the disk's mass.

As a result, the disk's angular momentum is:

[tex]L_{disk} = (1/2) * (m * r^2) * \omega\\\\L_{disk} = (1/2) * (120.0 kg * (4.00 m)^2) * (0.500 rev/s)\\\\L_{disk} = 960 kg m^2/s[/tex]

The sum of the angular momenta of the separate parts of the man-plus-disk system determines the overall angular momentum, which is as follows:

[tex]L_{total} = L_{man} + L_{disk}\\\\L_{total} = 560 kgm^{2/s} + 960 kgm^{2/s}\\\\L_{total} = 1520 kgm^{2/s[/tex]

To learn more about momentum

brainly.com/question/1042017

#SPJ1

The speed of the object is 6 m/s when it reaches a location where the electric potential is 3 volts.

To find the speed of the 2-kg object with a charge of 2 c when it reaches a location with an electric potential of 3 volts, we can use the conservation of energy equation,

1/2 [tex]mv^2[/tex] + qΔV = constant

where m is the mass of the object, v is its speed, q is its charge, ΔV is the change in electric potential, and the constant represents the initial energy of the object.

At the initial location where the object was released, the electric potential was 11 volts. Therefore, the initial energy of the object is,

E1 = qV1 = 2 c x 11 V = 22 J

At the location where the electric potential is 3 volts, the final energy of the object will be,

E2 = qV2 = 2 c x 3 V = 6 J

Since the energy is conserved, we can set E1 equal to E2,

1/2 [tex]mv^2[/tex] + qV1 = qV2

Solving for v, we get:

v = √(2q/m)(V1 - V2)

Plugging in the given values, we get:

v = √(2 x 2 C / 2 kg)(11 V - 3 V) = 6 m/s

Therefore, the speed of the object is 6 m/s.

Know more about the Conservation of energy here :
https://brainly.com/question/31514742

#SPJ11

The spring constant of the spring is 32.63 Nm⁻¹.

Mass of the block, m = 2.28 kg

Frequency of oscillation, f = 2.7 Hz

Angular frequency of oscillation, ω = 2[tex]\pi[/tex]f

ω = 2 x 3.14 x 2.28

ω = 14.31

We know that,

ω² = k/m

Therefore, the spring constant,

k = mω²

k = 2.28 x 14.31

k = 32.63 Nm⁻¹

To learn more about spring constant, click:

https://brainly.com/question/14159361

#SPJ4

-2*m*v*d is the rotational momentum of the system.

Hence, the correct option is C.

We are taking the location of particle 5 as the reference point for all angular momentum calculations, the angular momentum of the system can be found by calculating the angular momentum of each particle about particle 5 and adding them.

Let the mass of each particle is "m", and their velocities are v1, v2, v3, v4, v5, and v6, respectively, and their positions relative to particle 5 are d1, d2, d3, d4, d5, and d6, respectively, the angular momentum of each particle about particle 5 can be calculated as

Where

L1 = m * (r1 x v1), where r1 = d1 - d5

L2 = m * (r2 x v2), where r2 = d2 - d5

L3 = m * (r3 x v3), where r3 = d3 - d5

L4 = m * (r4 x v4), where r4 = d4 - d5

L5 = 0, where r5 = d5-d5 = 0, since the reference point is particle 5

L6 = m * (r6 x v6), where r6 = d6 - d5

The total angular moment of the system is defined by the vector sum of these
L = L1 + L2 + L3 + L4 + L5 + L6

We didn't know the values of the velocities and position of the particle so, we can't determine the value of L. However, we can eliminate the option A and B.

Hence, the angular momentum of the system can't not be negative or zero as defined in specific direction.
Hence, the correct option is C.

To know more about rotational momentum here
https://brainly.com/question/29803113
#SPJ4

The kinetic energy of a 0.051 kg tennis ball moving at 9.7 m/s is approximately 2.409395 Joules.

The kinetic energy formula, which is provided by: can be used to determine the energy of a moving object,

Kinetic energy (KE) = 1/2× mass ×velocity²

where mass represents the object's weight in kilogrammes (kg) and velocity its speed in metres per second (m/s).

The tennis ball has a mass of 0.051 kg and a speed of 9.7 m/s, thus we can enter these numbers into the formula to determine its kinetic energy:

KE = 1/2 × 0.051 kg × (9.7 m/s)²

KE = 0.5 × 0.051 kg × 94.09 m²/s²

KE = 2.409395 J

So, the kinetic energy of a 0.051 kg tennis ball moving at 9.7 m/s would be approximately 2.409395 Joules.

To know more about tennis ball

https://brainly.com/question/15232620

#SPJ4

Your Answer :- The magnetic field strength at the center of the larger loop is B/2, which corresponds to answer choice D.

The magnetic field strength (B) at the center of a current-carrying circular loop can be calculated using the formula:

B = μ₀ * I / (2 * π * R)

Where:
- μ₀ is the permeability of free space (4π × 10^(-7) Tm/A),
- I is the current,
- R is the radius of the loop.

Given that both loops are made from the same wire and carry the same current, the magnetic field strength at the center of the smaller loop is B. The radius of the larger loop is twice that of the smaller loop (2R).

To find the magnetic field strength at the center of the larger loop, we can use the same formula:

B_larger_loop = μ₀ * I / (2 * π * (2R))

Simplify the equation:

B_larger_loop = (μ₀ * I) / (4 * π * R)

Since B = μ₀ * I / (2 * π * R), we can rewrite the equation as:

B_larger_loop = (1/2) * B

So, the magnetic field strength at the center of the larger loop is B/2, which corresponds to answer choice D.

learn more about "magnetic field strength":-https://brainly.com/question/26257705

#SPJ11

When water is heated from 0°C to 4°C, its molecules gain energy and begin to move faster. This increased movement causes the water molecules to move slightly farther apart from each other, resulting in a decrease in density.

When water is heated from 0°C to 4°C, its density decreases. This is because water molecules are held together by hydrogen bonds, which become weaker as the temperature increases. As the water molecules move faster and spread out, the density decreases. However, once the temperature reaches 4°C, the density begins to increase again as the water molecules start to form a crystal lattice structure. A substance's density is its weight per unit volume. Water has a density of about 1 gram per milliliter, but this varies depending on temperature or whether substances are dissolved in it. Because ice is less dense than liquid water, the ice cubes in your glass float.

learn more about the density of water

https://brainly.com/question/30783919

#SPJ11

The United States uses the Fahrenheit scale in everyday life to measure temperature. The Fahrenheit scale is a temperature scale that was proposed by the German physicist Daniel Gabriel Fahrenheit in 1724. In this scale, the freezing point of water is 32°F and the boiling point is 212°F at standard atmospheric pressure. The scale is divided into 180 equal parts between these two points.

The Fahrenheit scale is still used in the United States to measure everyday temperatures, such as the temperature of the air or the temperature of liquids. However, many other countries and scientific fields use the Celsius scale, which is a metric temperature scale based on the freezing and boiling points of water, with 0°C representing the freezing point and 100°C representing the boiling point at standard atmospheric pressure.

It's important to note that both the Fahrenheit and Celsius scales are widely recognized and used around the world, but they represent different temperature ranges and units. It is possible to convert between the two scales using mathematical formulas or conversion charts.

Learn more about temperatures here:

https://brainly.com/question/24746268

#SPJ11

The number of gas molecules is equal to  3.26 x [tex]10^{11[/tex] molecules per liter volume.

To determine the number of gas molecules present per liter volume at the given pressure and temperature, we will use the Ideal Gas Law and Avogadro's number.
Ideal Gas Law: PV = nRT
where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is the temperature.
First, convert the pressure from mm of Hg to atm:
(1.0 x [tex]10^{-7[/tex] mm Hg) * (1 atm / 760 mm Hg) = 1.32 x [tex]10^{-10[/tex] atm
Now, let's use the Ideal Gas Law to find the number of moles (n) in 1 liter of volume:
n = PV / RT
n = (1.32 x  [tex]10^{-10[/tex]  atm)(1 L) / (0.0821 L atm/mol K)(293 K)
n = 5.42 x [tex]10^{-13[/tex]  mol
Finally, use Avogadro's number (NA = 6.02 x [tex]10^{23[/tex]) to find the number of gas molecules in 1 liter of volume:
Number of gas molecules = n * NA
Number of gas molecules = (5.42 x [tex]10^{-13[/tex] mol)(6.02 x [tex]10^{23[/tex])
Number of gas molecules ≈ 3.26 x [tex]10^{11[/tex] molecules per liter volume

Learn more about Ideal Gas Law :

https://brainly.com/question/28257995

#SPJ11

Answer: the pressure difference between the wide and narrow sections of the pipe is:

114,825 Pa - 101,325 Pa = 13,500 Pa

Explanation:We can use the Bernoulli's equation to solve this problem, which relates the pressure, velocity, and height of a fluid at two different points along a streamline. The equation is:

P1 + (1/2) * rho * v1^2 + rho * g * h1 = P2 + (1/2) * rho * v2^2 + rho * g * h2

where P1 and P2 are the pressures at the two points, v1 and v2 are the velocities at the two points, rho is the density of the fluid, g is the acceleration due to gravity, and h1 and h2 are the heights of the two points (which we can assume are the same in this problem, since the pipe is horizontal).

We can simplify the equation by assuming that the pipe is horizontal (so h1 = h2), and that the fluid is incompressible (so rho is constant). Then the equation becomes:

P1 + (1/2) * rho * v1^2 = P2 + (1/2) * rho * v2^2

We can use this simplified equation to solve for the pressure difference between the wide and narrow sections of the pipe. We'll assume that the wide section of the pipe has a diameter of 4.0 cm and the narrow section has a diameter of 2.0 cm. We can use the equation for the continuity of flow to relate the velocities at the two sections:

A1 * v1 = A2 * v2

where A1 and A2 are the cross-sectional areas of the two sections of the pipe (which we can calculate using the formula for the area of a circle: A = pi * r^2).

A1 = pi * (4.0 cm / 2)^2 = 12.57 cm^2

A2 = pi * (2.0 cm / 2)^2 = 3.14 cm^2

So we have:

12.57 cm^2 * 1.3 m/s = 3.14 cm^2 * v2

v2 = (12.57 cm^2 / 3.14 cm^2) * 1.3 m/s = 5.21 m/s

Now we can use the simplified Bernoulli's equation to solve for the pressure difference:

P1 + (1/2) * rho * v1^2 = P2 + (1/2) * rho * v2^2

We'll assume that the pressure at the wide section of the pipe is atmospheric pressure (which we can take to be 1 atm = 101,325 Pa), so P1 = 101,325 Pa. We'll also assume that the density of water is rho = 1000 kg/m^3.

101,325 Pa + (1/2) * 1000 kg/m^3 * (1.3 m/s)^2 = P2 + (1/2) * 1000 kg/m^3 * (5.21 m/s)^2

Simplifying and solving for P2, we get:

P2 = 101,325 Pa + (1/2) * 1000 kg/m^3 * (5.21 m/s)^2 - (1/2) * 1000 kg/m^3 * (1.3 m/s)^2

= 114,825 Pa

So the pressure difference between the wide and narrow sections of the pipe is:

114,825 Pa - 101,325 Pa = 13,500 Pa

Therefore, the answer is E) 13,500 Pa.

To learn more about diameter, refer below:

https://brainly.com/question/5501950

#SPJ11

The radius of an orbit of a satellite that orbits Jupiter once every 16.7 hours  is approximately 2.67 x 10^5 meters.

We'll use the following terms in our calculations: orbital period (T), gravitational constant (G), mass of Jupiter (M), and the radius of the orbit (r).

First, convert the orbital period (T) to seconds:
T = 16.7 hours * (3600 seconds/hour) = 60,120 seconds

Next, use the gravitational constant (G):
G = 6.674 × 10^(-11) m³ kg^(-1) s^(-2)

Recall the mass of Jupiter (M):
M = 1.90 x 10^27 kg

Use Kepler's Third Law to find the semi-major axis of the orbit (a), which is approximately equal to the radius (r) for a circular orbit:
T² = (4π² / GM) * r³

Solve for r:
r³ = (T² * GM) / (4π²)
r³ = (60,120² * 6.674 × 10^(-11) * 1.90 x 10^27) / (4π²)
r³ = 1.898 × 10^16 m³

Finally, find the cube root of r³ to get r:
r = (1.898 × 10^16)^(1/3)
r ≈ 2.67 x 10^5 m

The radius of the satellite's orbit around Jupiter is approximately 2.67 x 10^5 meters.

More on satellite's orbit: https://brainly.com/question/31088912

#SPJ11