When would you consider the FMU-152 tail fuze armed?

The increase in temperature of the embedded bullet is approximately 112.6 °C.

We will find the increase in temperature of the embedded bullet using the given mass, speed, specific heat, and energy conversion factors.
- Mass of the bullet (m) = 3.00 g = 0.003 kg (convert grams to kilograms)
- Speed of the bullet (v) = 240 m/s
- Specific heat of lead (c) = 0.0305 kcal/kg×°C = 0.0305 × 4186 J/kg×°C (convert kcal to Joules)
- Half of the heat energy remains with the bullet

1. Calculate the initial kinetic energy (KE) of the bullet using the formula KE = 1/2 × m × v²
2. Divide the initial KE by 2 to find the heat energy absorbed by the bullet
3. Use the heat energy (Q), mass (m), and specific heat (c) to calculate the increase in temperature (ΔT) using the formula Q = m × c × ΔT

Now let's calculate:

1. KE = 1/2 × 0.003 kg × (240 m/s)² = 86.4 J
2. Heat energy absorbed by the bullet = 86.4 J / 2 = 43.2 J
3. 43.2 J = 0.003 kg × (0.0305 × 4186) J/kg×°C × ΔT

Solving for ΔT:

ΔT = 43.2 J / (0.003 kg × 127.673 J/kg×°C) ≈ 112.6 °C

You can learn more about the temperature at: brainly.com/question/11464844

#SPJ11

The pH of the resulting solution, which is a mixture of 20.0 mL of 1.00 M HNO₂ and 40.0 mL of 0.500 M NaNO₂, is 2.74. This was calculated using the Henderson-Hasselbalch equation and the known concentrations of HNO₂ and NO₂⁻.

Nitrous acid (HNO₂) and sodium nitrite (NaNO₂) react with each other in water to form nitrite ion (NO₂⁻) and hydronium ion (H₃O⁺). The balanced chemical equation for the reaction is:

HNO₂ (aq) + NO₂⁻ (aq) + H₂O (l) -> NO₂⁻ (aq) + H₃O⁺ (aq)

First, we need to calculate the concentration of NO₂⁻ and HNO₂ in the mixture:

[NaNO₂] = 0.500 M

[VNaNO₂] = 40.0 mL = 0.0400 L

[NO₂⁻] = [NaNO₂]/V = 0.500/0.0400 = 12.5 mM = 0.0125 M

[HNO₂] = 1.00 M

[VHNO₂] = 20.0 mL = 0.0200 L

[HNO₂] = [HNO₂]/V = 1.00/0.0200 = 50.0 mM = 0.0500 M

Next, we can use the Henderson-Hasselbalch equation to calculate the pH of the solution:

pH = pKa + log([NO₂⁻]/[HNO₂])

pKa of nitrous acid is 3.34.

pH = 3.34 + log(0.0125/0.0500)

pH = 3.34 - 0.602

pH = 2.74

Therefore, the pH of the resulting solution is 2.74.

Learn more about Balanced chemical equation

brainly.com/question/28294176

#SPJ11

The solubility of Mg(OH)2 in the buffered solution at pH 9.0 is approximately 1.2 × 10-5 moles per liter. The solubility of Mg(OH)2 in a solution buffered at pH 9.0 can be calculated using the Ksp value and the ionization of water.

At pH 9.0, the concentration of OH- ions is higher than the concentration of H+ ions, making the solution basic. The equation for the dissociation of Mg(OH)2 is Mg(OH)2 → Mg2+ + 2OH-.

Using the Ksp value, we can calculate the concentration of Mg2+ and OH- ions in the solution. Since the solubility product constant (Ksp) is 1.8 × 10-11, we know that the product of the concentration of Mg2+ and OH- ions in the solution is equal to this value.

From this, we can calculate that the solubility of Mg(OH)2 in the buffered solution at pH 9.0 is approximately 1.2 × 10-5 moles per liter. This means that only a small amount of Mg(OH)2 will dissolve in the solution, as the Ksp value is relatively low.

To know more about buffered solution refer here:

https://brainly.com/question/24262133#

#SPJ11

The percent yield for this reaction is 84.996%. The correct answer is option B.

To determine the percent yield for this reaction, we have to follow these steps:

1. Calculate the moles of reactants:
- Moles of Cr2O3 = 44.1 g / 151.99 g/mol = 0.29015 mol
- Moles of Al = 35.0 g / 26.98 g/mol = 1.29727 mol

2. Determine the limiting reactant:
- Ratio of moles for Al to Cr2O3 = 1.29727 mol Al / 0.29015 mol Cr2O3 = 4.472
- Since the balanced equation has a 2:1 ratio of Al to Cr2O3, Cr2O3 is the limiting reactant.

3. Calculate the theoretical yield of Cr:
- Theoretical yield = 0.29015 mol Cr2O3 × (2 mol Cr / 1 mol Cr2O3) × 51.996 g/mol Cr = 30.169 g Cr

4. Calculate the percent yield:
- Percent yield = (Actual yield / Theoretical yield) × 100 = (25.6 g Cr / 30.169 g Cr) × 100 = 84.996%

Therefore, 84.996% is the percent yield for this reaction.

So, option B is correct.

For more such questions on percent yield, click on:

https://brainly.com/question/14714924

#SPJ11

When comparing single, double, and triple bonds formed between two carbon atoms, the shortest bond would be the triple bond. This is because it has three electron pairs shared between the carbon atoms, pulling them closer together. The strongest bond would also be the triple bond, as it has the most electron pairs involved in the bond, resulting in a stronger bond strength.

When comparing single, double, and triple bonds formed between two carbon atoms, the triple bond would be the shortest and the strongest. This is because a triple bond involves three shared pairs of electrons between the two carbon atoms, whereas a double bond involves only two shared pairs of electrons and a single bond involves only one shared pair of electrons. The greater the number of shared pairs of electrons, the stronger the bond and the shorter the distance between the two carbon atoms.

To know more about carbon atoms click here:

https://brainly.com/question/21850455

#SPJ11

The structure for sodium periodate is option D - NaIO₄. Sodium periodate is an inorganic compound with the chemical formula NaIO₄.

It is an ionic compound made up of sodium cations (Na⁺) and periodate anions (IO₄⁻). In the compound, the sodium cation has a charge of +1, while the periodate anion has a charge of -1.

The periodate anion contains one iodine atom and four oxygen atoms arranged tetrahedrally. The structure of NaIO₄ is tetrahedral, with the sodium cation located at the center and the four oxygen atoms of the periodate anions located at the vertices of the tetrahedron.

The compound is commonly used in organic chemistry as an oxidizing agent and in biological research as a stain for proteins. Sodium periodate (NaIO₄) is a white crystalline solid that is soluble in water and other polar solvents.

learn more about sodium periodate here:

https://brainly.com/question/30753453

#SPJ4

The volume occupied by 0.17 grams of gaseous H₂S at 27◦C and 380 torr is approximately 0.165 liters.

When it comes to the ideal gas law, the underlying assumption is that the gas is in a state of thermodynamic equilibrium. This means that its molecules are not interacting with each other except through perfectly elastic collisions.

Equation:

PV = nRT

where P is the pressure, V is the volume, n is the amount of gas (in moles), R is the ideal gas constant, and T is the temperature in Kelvin.

We can rearrange this equation to solve for the volume:

V = nRT/P

To use this equation, we need to know the number of moles of H₂S. We can find this using the molar mass of H₂S:

Molar mass of H₂S = 2(1.008 g/mol) + 32.06 g/mol = 34.076 g/mol

So, 0.17 g of H₂S is equivalent to:

n = mass/molar mass = 0.17 g / 34.076 g/mol = 0.004991 mol

Now we can substitute this value, along with the given values for temperature and pressure, into the ideal gas law:

V = nRT/P = (0.004991 mol)(0.08206 L·atm/mol·K)(300 K)/(380 torr) = 0.165 L

To know more about ideal gas law, click here

https://brainly.com/question/13821925

#SPJ1

The change in pH when 0. 1400 mol OH- is added to 1 in part 1 is 0.11 and in part 2 is 0.23.

Write the given quantities as follows:

[HPO₄]²⁻ = 1.140 M

[H₂PO₄]⁻ = 1.140 M

Initial pH = pKa = 7.21

As, [H₂PO₄]⁻ = [HPO₄]²⁻

After addition of 0.1400 mol OH⁻

Net moles of H₂PO₄⁻ = 1.140 - 0.1400 = 1.000 mol

Net moles of [HPO₄]²⁻ = 1.140 + 0.140 = 1.280 mol

pH = pKa + log [HPO₄]²⁻/[H₂PO₄]⁻

     = 7.21 + log [1.280/1]

     = 7.21 + 0.11 = 7.32

Change in pH = 7.32 - 7.21 = 0.11

For part 2

[HPO₄]²⁻ = 0.5700 M

[H₂PO₄]⁻ = 0.5700 M

Initial pH = pKa = 7.21

As, [H₂PO₄]⁻ = [HPO₄]²⁻

After addition of 0.1400 mol OH⁻

Net moles of H₂PO₄⁻ = 0.5700 - 0.1400 = 0.4300 mol

Net moles of [HPO₄]²⁻ = 0.5700 + 0.140 = 0.7100 mol

pH = pKa + log [HPO₄]²⁻/[H₂PO₄]⁻

     = 7.21 + log [0.7100/0.4300]

     = 7.21 + 0.23 = 7.44

Change in pH = 7.44 - 7.21 = 0.23

Learn more about pH change from the link given below.

https://brainly.com/question/13043239

#SPJ4

The primary kill mechanism of kinetic energy penetrators is the force of impact. The answer is c.

The kinetic energy penetrator is a type of ammunition used to penetrate armor. It is composed of a dense, non-explosive material, typically tungsten or depleted uranium, and is designed to penetrate armor through sheer force of impact.

As the penetrator strikes the armor, it transfers kinetic energy to the target, causing deformation and fragmentation of the armor. The kinetic energy penetrator does not rely on a blast wave, shaped charge, or case fragments to defeat the target. Instead, it uses its high velocity and mass to penetrate the armor and damage the target.

The kinetic energy penetrator is commonly used in anti-tank and anti-armor warfare, where its ability to defeat heavily armored vehicles is critical.

To know more about kinetic energy penetrators, refer here:
https://brainly.com/question/31606070#
#SPJ11

The coefficient for sulfuric acid when the equation is balanced using the lowest, whole-numbered coefficients is 2. The correct option is B).

To balance the given chemical equation, we need to make sure that the number of atoms of each element is equal on both sides of the equation. In this case, we have one atom each of radium, phosphorus, sulfur, oxygen, and hydrogen on both sides of the equation.

To balance the coefficient for sulfuric acid, we can start by placing a coefficient of 1 in front of radium phosphate, radium sulfate, and phosphoric acid. This gives us:

Ra3(PO4)2 + H2SO4 → RaSO4 + 2H3PO4

However, we can see that the coefficient of sulfuric acid is not balanced, as we have two hydrogen atoms on the product side and only one on the reactant side. To balance the hydrogen atoms, we can add a coefficient of 2 in front of sulfuric acid. This gives us:

Ra3(PO4)2 + 2H2SO4 → 3RaSO4 + 2H3PO4

Now we have two hydrogen atoms on both sides of the equation, and the equation is balanced.

To know more about sulfuric acid refer here:

https://brainly.com/question/1107054#

#SPJ11

The BLU-109/B is a type of bomb known as a penetrator bomb or bunker buster.

As its name implies, the BLU-109/B is designed to penetrate and destroy hardened targets such as underground facilities, bunkers, and other reinforced structures. In military operations, such targets are often well-protected and difficult to destroy using conventional bombs, making the BLU-109/B a valuable weapon in these situations.

The BLU-109/B bomb is constructed with a thick, high-strength steel casing that enables it to withstand the extreme forces that occur during impact. The bomb typically features fins or wings that provide stability during flight and help guide it towards the intended target. When the bomb is released, it freefalls towards the target until it reaches the desired altitude, at which point the guidance system activates and steers the bomb towards the target.

Learn more about bomb : https://brainly.com/question/1621958  

#SPJ11

The component that secures the aft cover to the stabilizer housing of the BSU-49 AIR bomb is the retaining ring or a similar fastening device.

1. The aft cover is the rear part of the bomb that protects the internal components and attaches to the stabilizer housing, which ensures the bomb's stable flight.
2. The stabilizer housing is connected to the bomb's tail section and houses the fins or stabilizers, allowing the bomb to maintain a steady trajectory.
3. To secure the aft cover to the stabilizer housing, a retaining ring or similar fastening device is used.
4. The retaining ring is inserted into a groove or channel, where it locks into place, holding the aft cover and stabilizer housing together.
5. This secure connection between the aft cover and stabilizer housing is essential for the bomb's overall structural integrity and performance during flight.

To know more about Bomb:

https://brainly.com/question/28739270

#SPJ11

To determine which balloon has the greater number of particles between A (O2) and B (Ne), we can use the given mass and the molar masses of the gases to find the number of moles, which is proportional to the number of particles.

Step 1: Find the molar mass of O2 and Ne.
- O2 has a molar mass of 32.0 g/mol (since the atomic mass of O is 16.0 g/mol and O2 has two oxygen atoms).
- Ne has a molar mass of 20.18 g/mol.

Step 2: Calculate the number of moles for each gas using the given mass of 10.0 grams.
- For O2: moles = (10.0 grams) / (32.0 g/mol) = 0.3125 mol
- For Ne: moles = (10.0 grams) / (20.18 g/mol) = 0.4955 mol

Step 3: Compare the number of moles to determine which balloon has more particles.
- Since 0.4955 mol (Ne) > 0.3125 mol (O2), the balloon filled with Ne (B) has a greater number of particles.

So, in the pair of balloons filled with 10.0 grams of O2 (A) and Ne (B), the balloon with the greater number of particles is B (Ne).

To know more about molar mass :

https://brainly.com/question/30640134

#SPJ11

The side chain of the amino acid most likely to be a substrate for Horseradish Peroxidase (HRP) is tyrosine (Tyr).

HRP is an enzyme that catalyzes the oxidation of various substrates, and it requires a hydrogen donor, such as a phenolic compound or a reductive substrate, to complete this process.

Tyrosine has a phenol group in its side chain, making it a suitable substrate for HRP due to its ability to donate a hydrogen atom. The other amino acids mentioned - lysine (Lys), leucine (Leu), and glutamine (Gln) - do not have phenol groups in their side chains and therefore are less likely to be substrates for HRP.

During the oxidation process, HRP converts the hydrogen donor to a more reactive form, which can then participate in subsequent reactions. This property of HRP is useful in various applications, such as detecting and measuring the presence of specific molecules in biological samples.

For more such questions on amino acid, click on:

https://brainly.com/question/24106148

#SPJ11

It would depend on the amount of the spill that was released and the solubility limit of the substance in question. However, once the solubility limit is reached, any additional spillage would no longer dissolve and would instead form a separate layer on top of the groundwater.

The solubility limit of a substance refers to the maximum amount of that substance that can be dissolved in a given amount of solvent (in this case, groundwater) at a specific temperature and pressure.

Once this limit is reached, any additional substance added to the solvent will no longer dissolve but instead remain in its solid or liquid form, depending on its physical state at that temperature and pressure.

Therefore, it is important to understand the solubility limit of any substance that could potentially spill into groundwater to determine the potential contamination that could occur. It is also crucial to implement preventative measures and response plans to minimize the risk of spills and contamination.

To know more about groundwater refer here:

https://brainly.com/question/15573579#

#SPJ11

The half-life for decay of a given isotope is constant because the number of counts decreases by half after a certain amount of time.

Half -life of a substance is defined as the time which is required for half of the quantity of a radioactive isotope to get decayed.It is a term which is used in nuclear chemistry for describing how quickly unstable atoms undergo radioactive decay into other nuclear species by emitting particles or the time which is required for number of disintegrations per second of radioactive material to decrease by one half of its initial value.

Learn more about half life,here:

https://brainly.com/question/24710827

#SPJ4

Because it filters out ultraviolet (UV) light from the sun, the ozone layer is crucial for keeping the earth's surface safe.

The majority of the UV energy from the Sun is absorbed by ozone in the stratosphere. The Sun's powerful UV radiation would copper sanitise the Earth's surface if ozone didn't exist. Most UV-b and all even the most intense UV-c light is blocked by ozone.

Most of the ultraviolet (UV-B) light from the sun is absorbed by it, which reduces how much of this radiation reaches the Earth's surface. The ozone layer is crucial in preserving human health since this radiation causes cataracts and skin cancer.

To know more about copper visit :

https://brainly.com/question/13677872

#SPJ1

Concentrated HCl and NaOH are both highly corrosive chemicals that can cause severe burns and eye damage upon contact. They also release harmful fumes that can irritate the respiratory system and cause chemical pneumonia. The safety pictogram that applies to both concentrated HCl and NaOH is the corrosive and toxic pictogram.

The safety issues of concentrated hydrochloric acid (HCl) and sodium hydroxide (NaOH) mainly involve their highly corrosive nature. They can cause severe skin burns and eye damage upon contact. In addition, concentrated HCl produces toxic fumes, which can be harmful when inhaled.

For these hazards, the safety pictograms that apply are as follows:

1. Corrosion (GHS05) - This pictogram indicates the substance can cause skin burns and eye damage, and is applicable to both concentrated HCl and NaOH.
2. Toxic (GHS06) - This pictogram indicates the substance can be fatal if swallowed, inhaled, or comes in contact with skin. It applies specifically to concentrated HCl due to its toxic fumes.

When handling these chemicals, it's essential to use proper personal protective equipment (PPE) such as gloves, goggles, and lab coats, and to work in a well-ventilated area.

To know more about Safety Issues:

https://brainly.com/question/30870623

#SPJ11

Copper plumbing pipes belong to the class of matter known as solids.

Solids are one of the three fundamental states of matter, the other two being liquids and gases. They are characterized by having a fixed shape and volume, as well as a regular arrangement of particles (atoms, ions, or molecules) within their structure. This arrangement results in the strong intermolecular forces that keep solids rigid and resistant to deformation.

Copper, a metallic element, is a good choice for plumbing pipes due to its various properties. As a solid, it is strong and durable, making it capable of withstanding the pressure exerted by water flow. Copper is also an excellent conductor of heat, which makes it suitable for hot water pipes. Additionally, it has natural antimicrobial properties, which help prevent the growth of bacteria in water systems.

For more such questions on matter, click on:

https://brainly.com/question/1172629

#SPJ11

The correct formula for ferrous nitrate is (C) Fe(NO₃)₂.

One iron atom (Fe) and two positively charged nitrate ions (NO₃-) make up the chemical compound ferrous nitrate. While "ferric" denotes a +3 oxidation state, the word "ferrous" indicates that the iron ion has a +2 oxidation state.

One nitrogen atom and three oxygen atoms make up the polyatomic ion known as the nitrate ion, or NO₃-. Two nitrate ions, each with a -1 charge, are present in ferrous nitrate to counteract the iron ion's +2 charge.

A crystalline substance that dissolves in water is ferrous nitrate. Iron and nitric acid can be combined to create it, or iron can be dissolved in nitric acid to create it. Ferrous nitrate is frequently employed as a laboratory reagent, as a raw material for the synthesis of other iron compounds, and as a fertilizer iron source.

Fe(NO₃)₂ is the complete chemical formula for ferrous nitrate.

To know more about the ferrous nitrate refer here :

https://brainly.com/question/28213596#

#SPJ11

Generally, the equilibrium constant help us to understand whether the reaction tends to have a higher concentration of products or reactants at equilibrium.

Generally the magnitude of the equilibrium constant is helpful in giving us the idea about the relative amount of the reactants and the products. Basically the larger value of the equilibrium constant (>103) indicates that the forward reaction is favored, i.e. the concentration of products is usually much larger than that of the concentration of the reactants at equilibrium.

Basically the equilibrium constant, K, for a chemical system is described as the ratio of product concentrations to reactant concentrations at equilibrium, each raised to the power of their respective stoichiometric coefficients.

Learn more about equilibrium constant from the link given below.

https://brainly.com/question/29838364

#SPJ4

We can use the equation ΔS_surr = -ΔH_sys/T, where ΔS_surr is the entropy change of the surroundings, ΔH_sys is the enthalpy change of the system, and T is the temperature in Kelvin.

First, we need to convert the temperature from Celsius to Kelvin:

T = 27°C + 273.15 = 300.15 K

Next, we can plug in the values we know:

ΔS_surr = -(-30,000 J) / (300.15 K) = 100 J/K

Therefore, the entropy change of the surroundings is 100 J/mol·K when 30 kJ of heat is released by the system at 27°C.

The positive value of the entropy change of the surroundings indicates that the surroundings become more disordered or randomized during the process. In this case, the system released 30 kJ of heat, which caused an increase in the entropy of the surroundings by 100 J/K. This is because the heat flows from the system to the surroundings, and the surroundings absorb the heat and become more disordered.

It is important to note that the entropy change of the surroundings is related to the entropy change of the system through the second law of thermodynamics, which states that the total entropy of an isolated system always increases over time. Therefore, the negative entropy change of the system, which is equal in magnitude to the positive entropy change of the surroundings in this case, indicates that the system became more ordered or organized during the process.

Overall, the calculation of the entropy change of the surroundings provides insight into the direction and magnitude of heat flow during a process and the resulting increase or decrease in the randomness or disorder of the surroundings.

learn more about entropy change here:

https://brainly.com/question/12616028

#SPJ11

C6H14 has a molecular weight of 86.18 g/mol (612.01 + 141.01) g/mol.

Weight is a measurement of the force of gravity acting on an object. It is inversely related to the mass and gravitational acceleration of an object. Despite the fact that the terms weight and mass are frequently used interchangeably in ordinary conversation, it is crucial to understand the difference between the two. Weight is a measurement of the force of gravity acting on an object, whereas mass was an indication of the quantity of matter that makes up that object.

A physical quantity called force defines the interaction of two systems or objects. It has both size (size) and direction because it is a form of vector quantity.

To know more about Force visit :

https://brainly.com/question/13191643

#SPJ1

The chemical equation for the reaction is:

CaSO₄∙1/2H₂O(s) + 3/2H₂O(l) -> CaSO₄∙2H₂O(s) and the  standard free energy change for the reaction is -451 kJ/mol.

To calculate ∆Go, we need to use the following equation:

∆Go = ∆G°f(products) - ∆G°f(reactants)

where ∆G°f is the standard free energy of formation of a substance at 298 K and 1 atmosphere. We can find the values for the standard free energies of formation in the Table of Standard Free Energies.

The values we need are:

∆G°f(CaSO₄∙1/2H₂O) = -983.6 kJ/mol

∆G°f(CaSO₄∙2H₂O) = -1434.6 kJ/mol

Substituting into the equation, we get:

∆Go = (-1434.6 kJ/mol) - (-983.6 kJ/mol)

∆Go = -451 kJ/mol

Therefore, the standard free energy change for the plaster of Paris  reaction is -451 kJ/mol.

learn more about standard free energy here:

https://brainly.com/question/6556762?utm_source=android&utm_medium=share&utm_campaign=question

#SPJ11

Since the flour produces the least number of waffles (10), it is the limiting reactant in this scenario.

To determine the limiting reactant in this situation, we'll calculate how many waffles can be made with each ingredient and identify the ingredient that produces the least number of waffles. The given reaction is:

2 cups flour + 3 eggs + 1 tbs oil → 4 waffles

1. With 5 cups of flour: (5 cups flour) / (2 cups flour per 4 waffles) = 2.5 sets of 4 waffles (total of 10 waffles)
2. With 9 eggs: (9 eggs) / (3 eggs per 4 waffles) = 3 sets of 4 waffles (total of 12 waffles)
3. With 3 tbs of oil: (3 tbs oil) / (1 tbs oil per 4 waffles) = 3 sets of 4 waffles (total of 12 waffles)

Since the flour produces the least number of waffles (10), it is the limiting reactant in this scenario. So, the answer is:
A) flour

To know more about Limiting Reactant:

https://brainly.com/question/9693602

#SPJ11

The component that provides firing delay times in the M904 fuze is the element that is M9 delay element.

The M904 fuze is the primary fuze that is used in the 155mm artillery of the shells and this is designed for to provide the airburst or the ground burst that is detonation depending in the required mission.

The fuze has the programmable that is delay time which can be set to the any value in between the 0.1 and the 999.9 seconds, that is allowing it to customized  the specific mission of the parameters. For this delay time, the M904 fuze will sensors the monitor on the various factors like as the air the pressure, the temperature,

To learn more about fuze here

https://brainly.com/question/20383504

#SPJ4

Benedict's reagent to a solution with sucrose, the following will happen:

1. Benedict's reagent, which is a solution of copper sulfate, sodium citrate, and sodium carbonate, will be mixed with the sucrose solution.
2. Since sucrose is a non-reducing sugar, it does not have free aldehyde or ketone groups, which are necessary for the reaction with Benedict's reagent.
3. Therefore, no reaction will occur, and the solution will not change color.

In summary, if you add Benedict's reagent to a solution with sucrose, there will be no observable reaction, as sucrose is a non-reducing sugar.

Benedict's reagent : Alkaline solution of copper sulfate , sodium citrate and sodium carbonate

Glucose and galactose both are reducing sugar. Both of them reduces copper(II) ion in Benedict's reagent into copper (I) ion.

To Learn more about Benedict's reagent:

https://brainly.com/question/30447277

#SPJ11

The root mean square speed of Cl2(g) molecules under the same conditions is found to be 648 m/s. The root means square speed is a measure of the speed of particles in a gas. It is calculated by taking the square root of the average of the squared speeds of each particle in the gas.

The formula for calculating the root mean square speed of a gas is sqrt(3RT/M), where R is the gas constant, T is the temperature in Kelvin, and M is the molar mass of the gas.

In this case, we are given the average kinetic energy of the gas and we can use the kinetic energy formula, KE=1/2MV^2, to calculate the root mean square speed of Cl2(g) molecules. Since the molar mass of Cl2 is 70.91 g/mol, we can use this value and the given kinetic energy to calculate the root mean square speed.

After calculations, the root mean square speed of Cl2(g) molecules under the same conditions is found to be 648 m/s. This means that on average, the Cl2(g) molecules are moving at a speed of 648 meters per second at the given temperature and conditions.

To know more about root mean square speed refer here:

https://brainly.com/question/28747486#

#SPJ11

To find the empirical formula for C10H20O5, we need to simplify the molecular formula by finding the greatest common divisor of the subscripts.

The empirical formula for C10H20O5 is:

1. Find the greatest common divisor (GCD) of the subscripts: 10, 20, and 5. The GCD is 5.
2. Divide each subscript by the GCD: C(10/5)H(20/5)O(5/5)
3. Simplify the subscripts: C2H4O1

Your answer: The empirical formula for C10H20O5 is C2H4O (Option C).

To know more about C10H20O5 refer here:

https://brainly.com/question/11443147

#SPJ11