which of the drawings in the figure best illustrates what happens when the temperature of a helium-filled rubber balloon is increased at constant pressure?

The given statement is true .

The sign of momentum is indeed always in the direction of travel.
Momentum is defined as the product of an object's mass and its velocity. Mathematically, it can be expressed as:
Momentum (p) = mass (m) × velocity (v)

Since velocity is a vector quantity that has both magnitude and direction, the sign of momentum will also depend on the direction of the object's motion. If an object is moving in a positive direction (e.g., to the right or upward), its momentum will have a positive sign. Conversely, if an object is moving in a negative direction (e.g., to the left or downward), its momentum will have a negative sign.

In summary, the sign of momentum is always in the direction of travel because it is directly influenced by the object's velocity, which is a vector quantity with both magnitude and direction.

To know more about Momentum:

https://brainly.com/question/30487676

#SPJ11

Semiconductor materials (carbon, silicon, germanium) typically have negative temperature coefficients of resistance.

The force constant k of the spring is approximately [tex]3.125 x 10^8 N/m[/tex].

To determine the force constant k of the spring, we can use the equation for the potential energy of a spring:

[tex]U = (1/2)kx^2[/tex]

where U is the potential energy of the spring, k is the force constant of the spring, and x is the displacement of the spring from its equilibrium position.

When the subway train hits the spring bumper, it compresses the spring by a distance of 0.2 m. We can use the work-energy theorem to find the potential energy stored in the spring:

W = ΔK + ΔU

where W is the work done on the subway train by the spring, ΔK is the change in kinetic energy of the subway train, and ΔU is the change in potential energy of the spring.

At the beginning of the collision, the subway train has a kinetic energy of:

[tex]K1 = (1/2)mv^2 = (1/2)(5.00 x 10^5 kg)(0.5 m/s)^2 = 62,500 J[/tex]

At the end of the collision, the subway train comes to a stop, so its kinetic energy is zero. Therefore, the change in kinetic energy is:

[tex]ΔK = K2 - K1 = 0 - 62,500 J = -62,500 J[/tex]

The potential energy stored in the spring is equal to the work done on the subway train by the spring, so:

[tex]ΔU = W = -62,500 J[/tex]

Using the equation for the potential energy of a spring, we can solve for the force constant k:

[tex]U = (1/2)kx^2[/tex]

[tex]ΔU = (1/2)kx^2[/tex]

[tex]-62,500 J = (1/2)k(0.2 m)^2[/tex]

[tex]k = -2(-62,500 J) / (0.2 m)^2[/tex]

[tex]k = 3.125 x 10^8 N/m[/tex]

for such more questions on   force constant

https://brainly.com/question/25313999

#SPJ11

Human pheromones are chemicals that are secreted by humans and detected by other humans that can affect the behavior or physiology of another person.

Pheromones are chemical signals released by animals or insects that can influence the behavior of other individuals of the same species. They are used primarily for communication. Pheromones can be used to attract mates, mark territorial boundaries, or alert others of potential danger. In humans, pheromones can be released through body odor, facial expressions, and even spoken language. Pheromones are detected by the olfactory system, which is the part of the brain dedicated to processing smells. Research has shown that certain pheromones can trigger a physiological response in other individuals, such as increased heart rate and blood pressure, pupil dilation, and even changes in hormone levels.

To learn more about pheromones

https://brainly.com/question/3712509

#SPJ1

When a positively charged rod is brought near a positively charged pith ball that is suspended from an insulating string, the pith ball will be repelled by the rod. This happens because like charges repel each other.

The positively charged rod and the positively charged pith ball both have an excess of positive charges, and therefore, they repel each other.

This can be explained by the concept of electrostatic force. Electrostatic force is the force between two charged objects. Objects with the same charge will repel each other, while objects with opposite charges will attract each other. In this case, the rod and the pith ball have the same charge, and so they will repel each other.

The insulating string that suspends the pith ball plays an important role in this scenario. Since the string is an insulator, it does not allow the charges to flow between the rod and the pith ball. Therefore, the pith ball remains charged and is affected by the repulsive force between it and the rod.

In summary, when a positively charged rod is brought near a positively charged pith ball suspended from an insulating string, the pith ball will be repelled by the rod due to electrostatic force.

For more such questions on Charges.

https://brainly.com/question/1131516#

#SPJ11

The speed of sound in air is approximately 340 m/s and the speed of light in air is approximately 3 × 10^8 m/s is  1020 m

When lightning strikes, it produces both light and sound. Since light travels faster than sound, we see the lightning first and then hear the thunder. By measuring the time interval between seeing the lightning and hearing the thunder, we can estimate the distance of the lightning strike.

Let's assume that the time interval between seeing the lightning and hearing the thunder is 3.00 s. This means that the lightning strike is at a distance d such that:

d = v_sound × t

where v_sound is the speed of sound and t is the time interval between seeing the lightning and hearing the thunder.

Substituting the values, we get:

[tex]d = 340 m/s × 3.00 s = 1020 m[/tex]

This means that the lightning strike is approximately 1020 meters away from us.

for such more questions on speed

https://brainly.com/question/13943409

#SPJ11

The person needs to consume approximately 1279 kcal/day to make up for the energy loss to the surroundings. The closest answer choice is C) 1300 kcal.

First, we need to convert 62 W into units of kilocalories per day. We can do this using the following steps:

Convert watts to joules per second (J/s):

62 W = 62 J/s

Convert joules per second to joules per day:

1 day = 24 hours x 60 minutes/hour x 60 seconds/minute = 86400 seconds

62 J/s x 86400 s/day = 5,356,800 J/day

Convert joules to kilocalories (kcal):

1 kcal = 4.186 kJ

5,356,800 J/day ÷ 4.186 kJ/kcal = 1279 kcal/day

Therefore, the person needs to consume approximately 1279 kcal/day to make up for the energy loss to the surroundings. The closest answer choice is C) 1300 kcal.

Learn more about joules

https://brainly.com/question/25982371

#SPJ4

The quantity "strain" expressed in terms of the fundamental quantities (mass, length, time) is equivalent to 1.

Strain is a dimensionless quantity that represents the relative deformation of a material under an applied force or stress. It can be expressed as the ratio of the change in length (ΔL) to the original length (L₀) of the material. In terms of fundamental quantities, strain can be written as:
Strain = ΔL / L₀

Since both the change in length (ΔL) and the original length (L₀) have the same dimensions of length (L), their ratio will be dimensionless, meaning that strain has no dimensions in terms of mass (M), length (L), or time (T).

Therefore, the strain is equivalent to:
1 (dimensionless)

Learn more about strain:

https://brainly.com/question/17046234

#SPJ11

The spin on a basketball moving horizontally at 10 m/s, such that it begins rising because of the magnus force is  0.19 revolutions per second.

To determine the spin required for a basketball to begin rising due to the Magnus force, we can use the following equation:

Magnus force = (pi/2) * air density * coefficient of lift * radius^2 * velocity^2

The coefficient of lift is a dimensionless constant that depends on the properties of the ball's surface and the angle of attack of the air flow. For a basketball, it is typically around 0.2.

The Magnus force is perpendicular to the velocity of the ball and in the direction of the spin. Therefore, in order to produce an upward force on the ball, the spin must be in the opposite direction to the velocity of the ball.

First, we can calculate the velocity of the ball relative to the air. Since the ball is moving horizontally, the relative velocity is the same as the velocity of the ball, which is 10 m/s.

Next, we can solve for the spin using the Magnus force equation:

Magnus force = (pi/2) * air density * coefficient of lift * radius^2 * velocity^2

Magnus force = (pi/2) * 1.2 kg/m^3 * 0.2 * (0.12 m)^2 * (10 m/s)^2

Magnus force = 0.0137 N

To produce an upward force of 0.0137 N, the spin must be such that the Magnus force is equal and opposite to the gravitational force on the ball, which is:

Gravitational force = mass * acceleration due to gravity

Gravitational force = 0.59 kg * 9.81 m/s^2

Gravitational force = 5.79 N

Therefore, the spin required is:

Spin = Magnus force / (mass * radius * velocity)

Spin = 0.0137 N / (0.59 kg * 0.12 m * 10 m/s)

Spin = 0.19 s^-1

So the basketball must be spinning at a rate of 0.19 revolutions per second, in the opposite direction to its horizontal velocity of 10 m/s, in order to begin rising due to the Magnus force.

For more such questions on spin, click on:

https://brainly.com/question/10120192

#SPJ11

To find the pressure of a gas given its mole fraction and the total pressure, one can use Dalton's law of partial pressures.

Here are some additional points to consider:

Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures of each gas in the mixture, which is proportional to its mole fraction. Therefore, the pressure of a gas can be calculated by multiplying its mole fraction by the total pressure of the gas mixture.

Learn More About mole

https://brainly.com/question/29367909

#SPJ11

An electric field is produced by either a constant or a changing magnetic field. The correct answer is option A.

Whenever there is a magnetic field that is either changing in strength or direction, it creates an electric field in the surrounding space. This phenomenon is known as electromagnetic induction and is the basis for many technological applications such as generators and transformers.

A coil and a magnet serve as a straightforward illustration to demonstrate the phenomenon of electromagnetic induction. A magnetic flux causes a relative motion to be created when a magnet is brought close to a coil. This generates an electromotive force, which causes the coil to conduct electricity.

for more information on  magnetic field : https://brainly.com/question/23096032

#SPJ11

Force exerted on block B by block A is half of the applied force, i.e., 0.5F.

Force is defined as an action that can change any object's state of motion, either by changing its speed or direction.

When force F is applied to block A, it will experience acceleration, which will result in a net force being exerted on block B due to the frictional force between the blocks.

Let a be the common acceleration of the blocks, which is same for both blocks since they are in contact with each other. Net force acting on block A is F - f, where f is frictional force between the blocks. Net force acting on block B is f.

F - f = ma   ; f = mb * a

ma and mb are the masses of blocks A and B, respectively.

F - f = f  ; F = 2f

F = 2mb * a

F = (ma + 2mb) * a

F = 0.36 * a

Therefore, force exerted on block B by block A is : f = mb * a = 0.18 * a

f = 0.18 * F / 0.36 = 0.5F

Therefore, force exerted on block B by block A is half of the applied force, i.e., 0.5F.

To know more about force, refer

https://brainly.com/question/12785175

#SPJ1

The net electric field at the center of the square is directed along the positive y-axis and has a magnitude of kq/2^3/2.

We can choose a coordinate system with origin at center of square, so that the position vectors of the charges are:

[tex]r1 = (1,1) \\r2 = (-1,1) \\r3 = (1,-1)[/tex]

The electric field at the center of square due to each charge can be calculated using Coulomb's law:

[tex]E1 = kq(r1 - r)/(r1 - r)^3 \\E2 = kq(r2 - r)/(r2 - r)^3\\E3 = kq(r3 - r)/(r3 - r)^3[/tex]

Since the charges are all of the same magnitude q, the electric fields have the same magnitude:

|E1| = |E2| = |E3| = kq/2^3/2

To find the direction of the electric field at the center of the square, we need to add the three electric fields vectorially:

[tex]E = E1 + E2 + E3[/tex]

Using vector addition:

[tex]E = kq/2^3/2 [(1,1)/(2^1/2) - (1,-1)/(2^1/2) - (-1,1)/(2^1/2)][/tex]

[tex]E = kq/2^3/2 (0,2)[/tex]

The magnitude of the electric field is:

|E| = [tex]kq/2^3/2[/tex]

To know more about electric field, here

brainly.com/question/15800304

#SPJ4

--The complete Question is, What is the net electric field at the center of a square with a side length of 2 cm, when three point charges of the same magnitude q are placed at three of its corners? Give the magnitude and direction of the electric field.--

To calculate the de Broglie wavelength of a beam of cars with a mass of 1500 kg and a speed of 65 km/h,

1. Convert the speed from km/h to m/s: 65 km/h * (1000 m/km) / (3600 s/h) = 18.056 m/s
2. Use the de Broglie wavelength formula:

λ = h / (m * v),

where λ is the de Broglie wavelength, h is Planck's constant (6.626 x 10⁻³⁴ Js), m is the mass (1500 kg), and v is the speed (18.056 m/s).
3. Plug in the values and calculate the wavelength: λ = (6.626 x 10⁻³⁴Js) / (1500 kg * 18.056 m/s) = 2.433 x 10⁻³⁸ m

The de Broglie wavelength of a beam of cars with a mass of 1500 kg and a speed of 65 km/h is approximately 2.433 x 10³⁸ meters.

Every particle of matter with linear motion is likewise a wave, according to De Broglie's theory of matter waves. The wavelength of a matter wave associated with a particle has an inverse relationship with the linear momentum of that particle.

to know more about  de Broglie wavelength: https://brainly.com/question/17295250

#SPJ11

If a current of 1.25 a is flowing through the television plugged into a wall socket having electrical potential difference of 120 v, the resistance of the television is 96 ohms.

To find the resistance of the television, we will use Ohm's Law, which is defined as:

V = I * R

Where:
- V is the electrical potential difference (voltage) in volts (V)
- I is the current in amperes (A)
- R is the resistance in ohms (Ω)

Given the information in the question, we have:
- V = 120 V
- I = 1.25 A

We need to find the resistance (R). We can rearrange the formula to solve for R:

R = V / I

Now, plug in the given values:

R = 120 V / 1.25 A

Calculate the resistance:

R = 96 Ω

So, the resistance of the television is 96 ohms.

More on resistance: https://brainly.com/question/27178187

#SPJ11

The zeroth law of thermodynamics pertains to the concept of thermal equilibrium, which is the relational condition that may exist between two systems when there is no net flow of heat between them.

In other words, if two systems A and B are in thermal equilibrium with a third system C, then A and B must also be in thermal equilibrium with each other. This law establishes the foundation for temperature measurement and provides a basis for the definition of temperature scales. The zeroth law of thermodynamics pertains to the concept of thermal equilibrium, which is a relational condition that may exist between two systems. When two systems are in thermal equilibrium, they have the same temperature and no net heat transfer occurs between them. This law helps establish the foundation for temperature measurement and comparison.

Learn more about heat transfer  :

https://brainly.com/question/31065010

#SPJ11

There are three main types of Boolean operations that are commonly used in 3D modeling:

1. Union: This operation combines two or more objects into a single object by merging their overlapping areas. This is useful for creating complex shapes by combining simpler ones.

2. Difference: This operation subtracts one object from another, creating a cavity or hole in the remaining object. This is useful for creating cutouts or removing unwanted sections of an object.

3. Intersection: This operation creates a new object that only includes the overlapping areas of two or more objects. This is useful for creating precise cuts or intersections between objects.

These Boolean operations are often used in combination with each other to create complex 3D models. They are supported by most 3D modeling software and are essential tools for creating detailed and intricate designs.

To know more about Boolean operations here

https://brainly.com/question/30882492

#SPJ11

The 2.5  is the electric field (both magnitude and direction) as a function of r, the distance from the geometric center of the region.

What is electric field ?

According to mathematics, the electric field is described as a vector field that may be connected to each point in space and represents the force per unit charge that is applied to a positive test charge that is at rest at that location. Either the electric charge or time-varying magnetic fields can produce an electric field.

What is magnitude ?

Magnitude in physics is simply described as "distance or quantity." It shows the size or direction that an object moves in either an absolute or relative sense. It is a way of expressing something's size or scope.

Therefore, The 2.5  is the electric field (both magnitude and direction) as a function of r, the distance from the geometric center of the region.

Learn more about electric field from the given link.

https://brainly.com/question/19878202

#SPJ1

A dancer is preparing to jump. Assuming the same velocity, the take-off angle that will give her the longest flight time is 45 degrees.

1. The trajectory of the dancer's jump can be modeled as a parabola, with the height and horizontal distance determined by the take-off angle and initial velocity.
2. The optimal angle for maximizing the flight time is achieved when the vertical and horizontal components of the initial velocity are equal.
3. This occurs at a take-off angle of 45 degrees, where the vertical and horizontal velocities have the same magnitude.

In summary, a take-off angle of 45 degrees will give the dancer the longest flight time, assuming the same initial velocity.

Learn more about velocity here:

https://brainly.com/question/24445340

#SPJ11

For an elastic collision, momentum is conserved and kinetic energy is constant. Therefore, the statements that are true for a system that includes two colliding objects are:
- Momentum is conserved
- Kinetic energy is constant

1. Kinetic energy is constant: In an elastic collision, the total kinetic energy of the system is conserved, meaning it remains the same before and after the collision.
2. Momentum is constant: In an elastic collision, the total momentum of the system is conserved, meaning it remains the same before and after the collision.

So, to summarize, in an elastic collision with two colliding objects, kinetic energy and momentum are both constant.

To know more about elastic collision:

https://brainly.com/question/2356330

#SPJ11

Here are the two claims: Because of the moon's weaker gravity, the ball has a higher inertia and moves farther. As the moon has no atmosphere, there is no air resistance to cause the ball to slow down.

The ball would fly six times further and land about 2 km (or 1.25 miles) further on the moon, where the gravity acceleration is six times smaller. A professional golfer could hit a drive on the moon this far if they had the right equipment.

On the moon, Alan Shepard of Apollo 14 played golf. He held a contingency sample extension handle with a no. 6 iron head in his hand as his "club." For personal things, each astronaut was given a set amount of weight. Shepard took the club head and three golf balls with his.

To learn more about golf on moon visit:

brainly.com/question/12463090

#SPJ1

The relationship between λ1 and λ2 is λ1 > λ2.

The distance between interference fringes on the screen is given by the formula:

d sinθ = mλ

where d is the distance between the two slits, θ is the angle between the line connecting the slit and the point on the screen where the fringe is observed, m is the order of the fringe (m = 0, 1, 2, ...), and λ is the wavelength of the light.

Since the distance between the slits and the screen, as well as the angle θ, do not change when we change the wavelength of light, the only way for the fringes to move closer together is for the wavelength to decrease. Therefore, we have:

λ1 > λ2

In other words, the wavelength of light that produces wider interference fringes is longer than the wavelength of light that produces narrower interference fringes.

To learn more about distance visit:

https://brainly.com/question/15172156

#SPJ11

Ray could use Metal bar 1 to find out if Metal bar 2 is a magnet by bringing them close to each other. If Metal bar 2 is a magnet, it will be attracted to Metal bar 1.

Ray can also try to move Metal bar 1 along the length of Metal bar 2. If Metal bar 2 is a magnet, it will induce a magnetic field in Metal bar 1, causing it to experience a force as it moves. Alternatively, when Ray moves Metal bar 1 along the length of Metal bar 2, he would observe a force acting on Metal bar 1 as it moves. This is because the magnetic field produced by Metal bar 2.

To know more about Metal bar, here

brainly.com/question/31331801

#SPJ4

When you create a best-fit line, the expected value of the slope represents the average rate of change in the dependent variable (y) for every unit increase in the independent variable (x). The slope helps you make predictions and understand the relationship between the two variables in your dataset.

When you create a best-fit line, the expected value of the slope is the coefficient that represents the rate of change between the two variables being analyzed. The slope is determined by finding the ratio of the change in the dependent variable to the change in the independent variable.

It is important to note that the slope of a best-fit line is not always a perfect representation of the true relationship between the variables, but rather an approximation based on the available data. Therefore, the expected value of the slope is subject to variation and uncertainty depending on the specific data set and methodology used to create the best-fit line.
learn more about dependent variables here: brainly.com/question/383055

#SPJ11

The "m" is the mass of the steam in kg.

To estimate the specific work done by the piston during the compression process, we can use the First Law of Thermodynamics, which states that the change in internal energy (ΔU) of a closed system is equal to the heat added to the system (Q) minus the work done by the system (W):

ΔU = Q - W

Assuming that the process is adiabatic (no heat transfer) and that there are no significant changes in kinetic and potential energies, we can simplify the equation to:

W = ΔU

Where W is the work done by the system and ΔU is the change in internal energy.

The change in internal energy of the steam can be expressed as:

ΔU = m × c_v × ΔT

Where m is the mass of the steam, c_v is the specific heat at constant volume, and ΔT is the change in temperature.

Since the volume ratio is 4:1, the final volume of the steam is one-fourth of the initial volume. Therefore, the initial and final specific volumes of the steam can be calculated as:

v_1 = V_1/m = 4V_2/m = 4v_2

Where V_1 and V_2 are the initial and final volumes, respectively.

Since the process is adiabatic, we can assume that the specific heat at constant volume is constant. Therefore, the change in internal energy can be expressed as:

ΔU = m × c_v × ΔT = m × c_v × (T_2 - T_1)

Where T_1 and T_2 are the initial and final temperatures, respectively.

Substituting the given values, we get:

ΔU = m × c_v × (600 K - 400 K) = m × c_v × 200 K

The specific work done by the piston can be calculated as:

W = ΔU = m × c_v × 200 K

To estimate the specific work done, we need to know the mass of the steam and the specific heat at constant volume. Assuming that the steam is an ideal gas, the specific heat at constant volume can be calculated as:

c_v = (3/2)R

Where R is the specific gas constant for steam. The value of R depends on the units used, and can be found in thermodynamic tables. For SI units, R = 0.287 kJ/(kg·K).

Substituting the values, we get:

c_v = (3/2) × 0.287 kJ/(kg·K) = 0.431 kJ/(kg·K)

Therefore, the specific work done by the piston is:

W = m × c_v × 200 K = m × 0.431 kJ/(kg·K) × 200 K = 86.2 m kJ/kg

Where "m" is the mass of the steam in kg.

Learn more about steam

brainly.com/question/15447025

#SPJ11

The statement is false when a hot metal is immersed into a beaker of cold water :

a. The heat will be absorbed by water and beaker.
This statement is true. When a hot metal is placed in cold water, heat will transfer from the metal to the water and the beaker, causing the water and beaker to increase in temperature.

b. In the experiment described above, the heat that leaves the system is considered to be a positive quantity.
This statement is false. In thermodynamics, heat leaving the system (the hot metal, in this case) is considered a negative quantity, while heat entering the system is considered a positive quantity.

c. The temperature of water will be increasing.
This statement is true. As the heat from the metal transfers to the water, the temperature of the water will increase.

d. The heat given off by the metal and the heat absorbed by the surroundings will be equal but are given opposite signs by convention.
This statement is true. According to the law of conservation of energy, the heat lost by the metal will be equal to the heat gained by the surroundings (water and beaker), but the signs will be opposite due to convention (negative for heat loss, positive for heat gain).

To know more about law of conservation of energy:

https://brainly.com/question/29775341

#SPJ11

Answer: 2.02 seconds.

Explanation:  Let’s solve this problem step-by-step. When an object is dropped from a height, it falls freely under the influence of gravity. The distance fallen by a freely falling object is given by the equation of motion: s = 1/2 * g * t^2, where s is the distance fallen, g is the acceleration due to gravity (9.8 m/s^2 on Earth), and t is the time taken to fall that distance.

In this case, the body of mass 1500g (which is irrelevant to the problem) is dropped from a height of 20m. So we can plug s = 20m and g = 9.8 m/s^2 into the equation above to find the time taken for the body to reach the ground: 20 = 1/2 * 9.8 * t^2. Solving for t, we get t^2 = 20 / (1/2 * 9.8) = 4.08. Taking the square root of both sides, we get t = sqrt(4.08) ≈ 2.02 seconds.

So, a body of mass 1500g dropped from a 20m high tower will reach the ground in approximately 2.02 seconds.

The daughter isotope in the given nuclear reaction is 218/86Rn.

In the nuclear reaction 222/88Ra -> 218/86Rn + 4/2He, the daughter isotope is 218/86Rn. This reaction is an example of alpha decay, where the parent nucleus, in this case, radium-222 (with 88 protons and 134 neutrons), spontaneously emits an alpha particle (helium nucleus) from its nucleus.

As a result of the alpha decay, the daughter nucleus, radon-218 (with 86 protons and 132 neutrons), is formed. This process reduces the atomic number by two and the mass number by four. The daughter nucleus formed by the alpha decay may be radioactive, and it may further decay by emitting particles or energy to reach a more stable state.

Learn more about daughter isotope

https://brainly.com/question/13033283

#SPJ4

The pressure increase inside the automobile engine block if the water in there froze would be 1,800 atm. Option (d) is the correct answer.

The pressure increase inside the automobile engine block can be calculated using the formula:

ΔP = B(ΔV/V)

where:

B = bulk modulus of ice = 2.0 x 10^9 Pa

ΔV/V = fractional increase in volume = 0.09

ΔP = pressure increase

We know that 1 atm = 1.0 x 10^5 Pa.

Substituting the given values, we get:

ΔP = (2.0 x 10^9 Pa) x (0.09) = 1.8 x 10^8 Pa

Converting this to atm, we get:

ΔP = 1.8 x 10^8 Pa ÷ 1.0 x 10^5 Pa/atm = 1800 atm

Therefore, the pressure increase inside the automobile engine block if the water in there froze would be 1,800 atm. Option (d) is the correct answer.

Learn more about pressure

brainly.com/question/12971272

#SPJ11