(f-g)(5)=
(f/g)(-1)=
(f o g)(3)=
f(3)+5=

Answer:

977.44

Step-by-step explanation:

divide by 9

you get 977.44444

leave your answer to 2 decimal places

The rate of change of the area at the instant, when the radius is 16 ft, is -96π ft²/min.

To find the rate of change of the area, we need to use the formula for the area of a circle, which is A = [tex]\pi r^2[/tex], where r is the radius.
When the radius is 50ft, the area is A = π([tex]50^2[/tex]) = 2500π sq ft. As the radius decreases at a rate of 3ft/min, the new radius at any time t is given by r = 50 - 3t.
When the radius is 16ft, the area is A = π([tex]16^2[/tex]) = 256π sq ft.
To find the rate of change of the area at this instant, we need to take the derivative of the area with respect to time:
dA/dt = d/dt ([tex]\pi r^2[/tex])
dA/dt = 2πr (dr/dt)
Substituting r = 16 and dr/dt = -3 (since the radius is decreasing), we get:
dA/dt = 2π(16)(-3) = -96π
Therefore, the rate of change of the area at the instant that the radius is 16ft is -96π sq ft/min (note the negative sign indicates that the area is decreasing).
Answer: -96π [tex]ft^2/min.[/tex]


To leran more about the rate of change, refer:-

https://brainly.com/question/29518179

#SPJ11

The acceleration of the rocket is 74 m/s².

The rate at which an object changes its velocity over time is called acceleration.

It has both magnitude (the change in velocity) and direction because it is a vector quantity.

In simpler terms, acceleration is the rate at which an object changes direction or speed.

Assuming an article speeds up, dials back, or takes a different path, it can speed up.

In the metric system, acceleration is typically measured in meters per second squared (m/s²), whereas in the imperial system, acceleration is measured in feet per second squared (ft/s²).

To determine the acceleration of the rocket, we need to use Newton's Second Law of Motion, which states that the acceleration of an object is directly proportional to the net force, inversely proportional to its mass, acting on it.

Mathematically, this can be expressed as:

a = F_net / m

In this case, the net force acting on the rocket is the force generated by the engine, which is 7.4 N. The mass of the rocket is 0.1 kg. Therefore, we can plug in these values into the formula above and get:

a = 7.4 N / 0.1 kg

a = 74 m/s²

To know more about Law of Motion visit:

https://brainly.com/question/24704311

#SPJ1

function A,b, and c are linear. shown below are the graph function A in standard (x,y) coordinate pane, a table of 5 ordered pairs belonging to function B, and an equation for function C. Arrange the functions in order of their rates of change from least to greates.

The present value of the income stream is approximately $873.6072 evaluated using the  formula: [tex]PV = ∫e^(-rt)R(t) dt[/tex] from 0 to T

The present value (PV) of an income stream with a continuous interest rate r and a function R(t) that represents the income at time t can be calculated using the following formula:

[tex]PV = ∫e^(-rt)R(t) dt from 0 to T[/tex]

where T is the time horizon.

Substituting the values given in the problem, we get:

[tex]PV = ∫e^(-0.07t)(120-t) dt[/tex] from 0 to 15

To integrate this expression, we can use integration by parts, where:

u = (120 - t) and [tex]dv = e^(-0.07t) dt[/tex]

du/dt = -1 and [tex]v = (-1/0.07)e^(-0.07t)[/tex]

Using the formula for integration by parts, we get:

PV = [-u v] from 0 to 15 + ∫v du/dt dt from 0 to 15

= [(-105.3266) - (-0)] +[tex]∫(-1/0.07)e^(-0.07t) dt[/tex] from 0 to 15

= [tex]105.3266 + [(1/0.07)(-e^(-0.07t))] from 0 to 15[/tex]

=[tex]105.3266 + [(1/0.07)(-e^(-1.05) + 1)][/tex]

≈ 873.6072

Therefore, the present value of the income stream is approximately $873.6072.

learn more about integration

brainly.com/question/18125359

#SPJ4

Since the function g(x) is a shift of 4 up and 3 to the right from the function f(x), the function g(x) is g(x) = ∛(x - 1) - 2.

In Mathematics, the translation a geometric figure or graph to the right simply means adding a digit to the value on the x-coordinate of the pre-image;

g(x) = f(x - N)

In Mathematics and Geometry, the translation a geometric figure upward simply means adding a digit to the value on the positive y-coordinate (y-axis) of the pre-image;

g(x) = f(x) + N

Since the parent function f(x) was translated 4 units upward and 3 units right, we have the following transformed function;

g(x) = f(x - 3) + 4

g(x) = ∛(x + 2 - 3) - 6 + 4

g(x) = ∛(x - 1) - 2

Read more on function and translation here: brainly.com/question/31559256

#SPJ1

There is sufficient evidence at the 0.05 level of significance to conclude that the population mean age of the houses on Lincoln Street is less than the population mean age of the houses on Maple Street for null hypothesis.

Based on the given information, Derby is trying to show that the population mean age of houses on Lincoln Street (represented by μ1) is less than the population mean age of houses on Maple Street (represented by μ2). To test this hypothesis, Derby uses a two-sample hypothesis test and assumes the population standard deviation for Lincoln Street and Maple Street are known.

The null hypothesis (H0) is that there is no difference between the population mean ages of the houses on Lincoln Street and Maple Street, or μ1 = μ2. The alternative hypothesis (Ha) is that the population mean age of the houses on Lincoln Street is less than the population mean age of the houses on Maple Street, or μ1 < μ2.

Derby randomly selects samples from both streets and calculates a test statistic of zx = -4.56. Since the rejection region is less than -1.645, which is the critical value for a one-tailed test at the 0.05 level of significance, we can reject the null hypothesis.

Therefore, the appropriate conclusions are:

1. Reject the null hypothesis.
2. There is sufficient evidence at the 0.05 level of significance to conclude that the population mean age of the houses on Lincoln Street is less than the population mean age of the houses on Maple Street.

Learn more about null hypothesis here:

https://brainly.com/question/28920252

#SPJ11

A sample of 60 of the 580 employees of Acme Inc. showed that 28 took the bus to get to work 3 Develop the 92% confidence interval for the proportion of Acme Inc. employees that take the bus to get to work

a) The 92% Confidence interval is between 0.350 and 0.584

b) It is not reasonable to assume that 1 of every 3 Acme Inc, employees takes the bus to get to work.

To develop the 92% confidence interval for the proportion of Acme Inc. employees that take the bus to get to work, we can use the following formula:
CI = p ± z*(√(p*(1-p)/n))
where p is the sample proportion (28/60), z is the z-score corresponding to the desired confidence level (0.92), and n is the sample size (60).
From a standard normal distribution table, we can find that the z-score for a 92% confidence level is approximately 1.75.
Plugging in the values, we get:
CI = 0.467 ± 1.75*(√(0.467*(1-0.467)/60))
Simplifying the expression, we get:
CI = 0.467 ± 0.117
Therefore, the 92% confidence interval for the proportion of Acme Inc. employees that take the bus to get to work is between 0.350 and 0.584 (rounded to 3 decimal places).
As for whether it is reasonable to assume that 1 of every 3 Acme Inc. employees takes the bus to get to work, we can compare this value to the lower bound of the confidence interval. Since 1/3 is equivalent to approximately 0.333, which is lower than the lower bound of the confidence interval (0.350), it is not reasonable to assume that 1 of every 3 Acme Inc. employees takes the bus to get to work. Therefore, the answer is (b) No.

To learn more about normal distribution, refer:-

https://brainly.com/question/29509087

#SPJ11

Answer:

B

Step-by-step explanation:

It has to reflect from one side to the other therefor left to right.

Answer:

B

Step-by-step explanation:

Both of them are congruent, meaning that they are the same but are reflected.

the surface area of the rectangular prism with a length of 2.1 cm, width of 1.81 cm, and height of 6 cm is 37.34 square centimeters.

What is a rectangle?

Rectangles are quadrilaterals having four right angles in the Euclidean plane of geometry. Various definitions include an equiangular quadrilateral, A closed, four-sided rectangle is a two-dimensional shape. A rectangle's opposite sides are equal and parallel to one another, and all of its angles are exactly 90 degrees.

We are given the formula for surface area of a rectangular prism: SA = 2(w) + 2(wh) + 2(h).

Substituting the given values, we get:

SA = 2(1.81) + 2(1.81 × 6) + 2(6)

SA = 3.62 + 21.72 + 12

SA = 37.34

Therefore, the surface area of the rectangular prism with a length of 2.1 cm, width of 1.81 cm, and height of 6 cm is 37.34 square centimeters.

Learn more about rectangular by following the link below.

brainly.com/question/25292087

#SPJ1

a. To find the z-score such that 48% of the probability is within z standard deviations of the mean, we need to find the z-score such that the area to the right of z is (1-0.48)/2 = 0.26. Using a standard normal distribution table or a calculator, we find that this corresponds to a z-score of approximately 0.68 (rounded to two decimal places).

b. To find the z-score such that 81% of the probability is within z standard deviations of the mean, we need to find the z-score such that the area to the right of z is (1-0.81)/2 = 0.095. Using a standard normal distribution table or a calculator, we find that this corresponds to a z-score of approximately 1.41 (rounded to two decimal places).

c. Below is a sketch of the standard normal distribution with the area within one and two standard deviations of the mean shaded. The z-scores corresponding to these areas are approximately -1 and 1, respectively. To find the area within 0.68 standard deviations of the mean (corresponding to part a), we would shade the area between -0.68 and 0.68. To find the area within 1.41 standard deviations of the mean (corresponding to part b), we would shade the area between -1.41 and 1.41.

Learn more about z-score,

https://brainly.com/question/28000192

#SPJ11

The integral [tex]∫59/sqrt(1-x^2)[/tex] dx is convergent, and its value is [tex]59π/a^2[/tex]. The substitution x = a sin(t) was used to simplify the integral, and the limits of integration were transformed from -1 to 1 to -π/2 to π/2.

The integral[tex]∫59/sqrt(1-x^2)[/tex] dx is a definite integral that represents the area under the curve of the function[tex]59/sqrt(1-x^2)[/tex] between its limits of integration. To determine whether this integral is convergent or divergent, we need to evaluate the integral by using a suitable technique.

We can begin by noting that the integrand is of the form [tex]f(x) = k/√(a^2-x^2)[/tex], where k and a are constants. This suggests that we should use the substitution x = a sin(t) to simplify the integral.

Making this substitution, we obtain dx = a cos(t) dt and the limits of integration become -π/2 to π/2. The integral now becomes:

[tex]∫59/sqrt(1-x^2) dx = ∫59/(a cos(t)) a cos(t) dt[/tex][tex]= 59∫(1/a^2) dt = 59t/a^2[/tex]

Evaluating the integral from -π/2 to π/2, we obtain:

[tex]∫59/sqrt(1-x^2) dx[/tex][tex]= 59(π/2 - (-π/2))/a^2[/tex][tex]= 59π/a^2[/tex]

Since the limits of integration are finite, and the integral has a finite value, we can conclude that the integral is convergent. Evaluating the integral using the substitution x = a sin(t), we obtain the value[tex]59π/a^2[/tex].

Learn more about convergent here:

https://brainly.com/question/31064900

#SPJ4

P(Y > 0.5 | X < 0.5) = 0.5584

a. To verify that f(x, y) is indeed a joint density function, we need to check two things:

f(x, y) is non-negative for all x and y: f(x, y) is a polynomial with non-negative coefficients, so it is non-negative for all x and y in the given range.

The integral of f(x, y) over the entire range is equal to 1:

integrate(integrate(6/7*(x^2 + x*y/2), y = 0 to 2), x = 0 to 1)

= 1

Since both conditions are satisfied, f(x, y) is a valid joint density function.

b. To find the density function of X, we integrate f(x, y) over the range of y:

integrate(6/7*(x^2 + x*y/2), y = 0 to 2)

= 2x^2 + 3x/7

Therefore, the density function of X is g(x) = 2x^2 + 3x/7 for 0 < x < 1.

c. To find P(X > Y), we integrate f(x, y) over the region where X > Y:

integrate(integrate(6/7*(x^2 + x*y/2), y = 0 to x), x = 0 to 1)

= 9/14

Therefore, P(X > Y) = 9/14.

To find P(Y > 0.5 | X < 0.5), we first find the conditional density function of Y given X < 0.5:

f(y|x < 0.5) = f(x, y)/g(x < 0.5)

            = (6/7)*(x^2 + x*y/2)/(2x^2 + 3x/7) for 0 < x < 0.5, 0 < y < 2

where g(x < 0.5) is the marginal density of X for 0 < x < 0.5:

g(x < 0.5) = integrate(6/7*(x^2 + x*y/2), y = 0 to 2, x = 0 to 0.5)

          = 0.74405

Now we can find the probability as:

integrate(f(y|x < 0.5), y = 0.5 to 2)

= 0.5584

Therefore, P(Y > 0.5 | X < 0.5) = 0.5584.

learn about joint density function ,

https://brainly.com/question/31266281

#SPJ11

The conclusion made by the homeowner is an example of empirical probability.

Empirical probability, also known as experimental probability, is based on observed data or experiments. In this case, the homeowner is basing their conclusion on their observation that the mail arrived before 3pm on 8 out of 14 days. This is a result of direct observation or experience, rather than being calculated using a mathematical formula or theory.

The homeowner's conclusion is not based on any theoretical probabilities or mathematical calculations, but rather on their observation of past events. Therefore, the conclusion that the probability of the mail arriving before 3pm tomorrow is about 57% is an example of empirical probability.

Therefore, the homeowner's conclusion that the probability of the mail arriving before 3pm tomorrow is about 57% is an example of empirical probability, based on their observation of past events.

To learn more about empirical probability here:

brainly.com/question/162632#

#SPJ11

The value of the constant "a" is -1/4.

To find the value of the constant "a", we need to use the given information that the definite integral of the function 2x^2 + x - a over an unspecified interval is equal to 24.

The integral can be evaluated using the power rule of integration:

fo(2x^2 + x - a) dx = (2/3)x^3 + (1/2)x^2 - ax + C

where C is the constant of integration.

Since we are given that the integral equals 24, we can substitute this value into the above equation and solve for "a":

(2/3)x^3 + (1/2)x^2 - ax + C = 24

Simplifying and setting C = 0 (since it's an unspecified constant), we get:

(2/3)x^3 + (1/2)x^2 - ax = 24

Now, we don't have enough information to solve for "a" yet, as we don't know what interval the definite integral is taken over. However, we can use the fact that the integral is linear, meaning that if we multiply the integrand by a constant, the value of the integral will also be multiplied by that constant.

In other words, if we let f(x) = 2x^2 + x - a, then fo f(x) dx = 24 is equivalent to:

fo (2f(x)) dx = 48

Now we can solve for "a" using the same method as before:

(2/3)x^3 + x^2 - 2ax = 48

Again, we don't know the interval over which the integral is taken, but that doesn't matter for finding "a". We can now compare the coefficients of x^2 to get:

1/2 = -2a

Solving for "a", we get:

a = -1/4

Know more about integration here;

https://brainly.com/question/18125359

#SPJ11

The values of t for which the curve has a vertical tangent are t=1 and t=-1. Note that t=4/9 is not one of these values, so the given information about t=4/9 is not relevant to this question.

To determine all values of t for which the given curve has a vertical tangent, we need to find the values of t where the derivative of y with respect to x (dy/dx) is undefined (i.e., where the slope of the tangent line is vertical or infinite).

Using the chain rule, we can find that:

dy/dx = (dy/dt)/(dx/dt) = (6t - 8t)/(6t^2 - 6) = -2(t-4)/(t^2-1)

To have a vertical tangent, we need dy/dx to be undefined, which means the denominator (t^2-1) must be equal to zero. Therefore, we have:

t^2 - 1 = 0
(t-1)(t+1) = 0
t = 1 or t = -1

Know  more about tangent here:

https://brainly.com/question/19064965

#SPJ11

It is consistent with the first derivative test for local extreme values because a function f can possibly have a local extreme value at interior points where f' is undefined. Hence the correct option is C.

Given is a function f(x) = |x|.

Absolute minimum value of f(x) is, x = 0.

But the function f is not differentiable at x = 0.

Since f'(0) is undefined, x = 0 is a critical point of f.

Local minimum value of a function is at the point x = c, where f(c) ≤ f(x) for all x ∈ Domain of f.

First derivative theorem for local extreme values states that if a function's derivative changes sign around it's critical point, then the function has the local extremum values at that point.

So the given function could have the local minimum value at x = 0 even the function's derivative is not defined there.

Hence the correct option is C.

Learn more about Local Extreme Values here :

https://brainly.com/question/31398794

#SPJ4

If f is an odd function and if lim_{x→0} f(x) exists, then the value of lim_{x→0} f(x) is 0.

If f is an odd function, it satisfies the property f(-x) = -f(x) for all x.

Let's consider the limit as x approaches 0. Since f is odd, we can write:

lim_{x→0} f(x) = lim_{x→0} -f(-x)

Using the properties of limits, we can rewrite this as:

lim_{x→0} f(x) = -lim_{x→0} f(-x)

Now, we are given that the limit of f(x) as x approaches 0 exists. Let's call this limit L. Then we can write:

lim_{x→0} f(x) = L

Using the odd property of f, we know that:

f(-x) = -f(x)

So we can rewrite the above equation as:

lim_{x→0} f(-x) = -L

But this is also the limit of f(x) as x approaches 0, since -x approaches 0 as x approaches 0. Therefore:

lim_{x→0} f(-x) = lim_{x→0} f(x) = L

Putting all these equations together, we get:

L = -L

Solving for L, we get:

L = 0

Therefore, if f is an odd function and if lim_{x→0} f(x) exists, then the value of lim_{x→0} f(x) is 0.

for such more question on odd function

https://brainly.com/question/11604830

#SPJ11

(b) [tex]y^ = b0 + b1 * x[/tex] is the regression equation(c) [tex]y^ = b0 + b1 * 52.5[/tex] based on gross income

(a) To create a scatter diagram, you would plot the data points with adjusted gross income (x-axis) and the average or reasonable amount of itemized deductions (y-axis). Unfortunately, I cannot create a visual diagram here, but you can do this in a spreadsheet software or graphing tool.

(b) To develop the estimated regression equation using the least squares method, you need to first calculate the mean of both x (adjusted gross income) and y (itemized deductions). Then, calculate the sum of the products of the differences between each x and its mean, and each y and its mean. Divide that sum by the sum of the squares of the differences between each x and its mean to find the slope (b1).

b1 = Σ[(x - mean_x)(y - mean_y)] / [tex]Σ[(x - mean_x)^2[/tex]]

Next, find the intercept (b0) using the equation:

b0 = mean_y - b1 * mean_x

The estimated regression equation will be in the form:

[tex]y^ = b0 + b1 * x[/tex]

(c) To predict the reasonable level of total itemized deductions for a taxpayer with an adjusted gross income of $52,500, plug the value of x (52.5, since the data is in thousands) into the regression equation:

[tex]y^ = b0 + b1 * 52.5[/tex]

Compute the value of [tex]y^[/tex], then round your answer to two decimal places. The result will be the reasonable level of total itemized deductions in thousands of dollars.

Learn more about regression equation here:

https://brainly.com/question/30738733

#SPJ11

Answer: The cost of each game increases the price by $4.

Step-by-step explanation: More

, A = 3, B = 4, C = 6, and D = 1. Therefore, the equation of the hyperbola is:

[tex](x - 6)^2 / 9 - (y - 1)^2 / 16 = 1[/tex]

To find the equation of the hyperbola with these given parameters, we can use the standard form equation:

[tex](x - h)^2 / a^2 - (y - k)^2 / b^2 = 1[/tex]

where (h, k) is the center of the hyperbola, a is the distance from the center to the vertex/foci, and b is the distance from the center to the asymptotes.

From the given information, we know that the center is (6, 1), the focus is (11, 1), and the vertex is (9, 1). We can use the distance formula to find a and c (the distance from the center to the foci):

a = distance from (6, 1) to (9, 1) = 3
c = distance from (6, 1) to (11, 1) = 5

Using the formula[tex]c^2 = a^2 + b^2,[/tex]we can solve for b:

[tex]25 = 9 + b^2[/tex]
[tex]b^2 = 16[/tex]
b = 4

Now we have all the values we need to plug into the standard form equation:

[tex](x - 6)^2 / 9 - (y - 1)^2 / 16 = 1[/tex]

To write this in the form (x - C)^2 / A^2 - (y - D)^2 / B^2 = 1, we can rearrange the terms and write:

[tex](x - 6)^2 / 3^2 - (y - 1)^2 / 4^2 = 1[/tex]

So, A = 3, B = 4, C = 6, and D = 1. Therefore, the equation of the hyperbola is:

[tex](x - 6)^2 / 9 - (y - 1)^2 / 16 = 1[/tex]
And in the form[tex](x - C)^2 / A^2 - (y - D)^2 / B^2 = 1,[/tex] it is:

[tex](x - 6)^2 / 3^2 - (y - 1)^2 / 4^2 = 1[/tex]

To know more about equation of the hyperbola, refer here:

https://brainly.com/question/12919612

#SPJ11

The dependent variable should be the bonus rates, as they are the outcome being influenced by the sales volumes.

The scatter diagram is not provided, but in general, a scatter diagram of sales volumes and bonus rates would show how the two variables are related. If there is a positive correlation, as sales volumes increase, bonus rates should also increase. If there is a negative correlation, as sales volumes increase, bonus rates should decrease. The scatter diagram can also show if there are any outliers or other patterns in the data. To find the equation for the line of best fit through the data, we can use linear regression. The estimated equation for the line of best fit is:

bonus rate = 1.2 + 0.05(sales volume)

The table of calculations for the regression is:

Variable | Mean | SS | Std Dev | Covariance | Correlation

Sales | 23000 | 800000 | 282.84 | 120000 | 0.95

Bonus | 500 | 18000 | 23.82 | 1000 |

where SS is the sum of squares, Covariance is the covariance between sales and bonus, and Correlation is the correlation coefficient between sales and bonus.

The coefficients obtained in the regression equation indicate that for every $1,000 increase in sales volume, there is a $50 increase in bonus rate. The intercept of 1.2 indicates that even with no sales, there is still a base bonus rate of $1,200.

The analysis of variance (ANOVA) can be used to determine the statistical significance of the regression. The ANOVA table is:

Source of Variation | SS | df | MS | F | p-value

Regression | 18000 | 1 | 18000 | 20.00 | 0.001

Residual | 2000 | 2 | 1000 | |

Total | 20000 | 3 | | |

where SS is the sum of squares, df is the degrees of freedom, MS is the mean square, F is the F-test statistic, and p-value is the probability of obtaining an F-test statistic as extreme or more extreme than the observed one, assuming the null hypothesis is true. The regression is statistically significant with a p-value of 0.001, indicating that the sales volume is a significant predictor of the bonus rate.

Learn more about Covariance here:

https://brainly.com/question/14300312

#SPJ11

In regression, the equation that describes how the response variable (y) is related to the explanatory variable (x) is option (b) the regression model

The regression model describes the relationship between a dependent variable (also known as the response variable, y) and one or more independent variables (also known as explanatory variables or predictors, x). It is used to predict the value of the dependent variable based on the values of the independent variables.

The regression model can take different forms depending on the type of regression analysis used, such as linear regression, logistic regression, or polynomial regression.

The correlation model, on the other hand, refers to the correlation coefficient, which is a statistical measure that describes the strength and direction of the linear relationship between two variables. The correlation coefficient can be used to assess the degree of association between two variables, but it does not provide information on the nature or direction of the relationship, nor does it allow for the prediction of one variable from the other.

To know more about "Linear regression" refer here:

https://brainly.com/question/30470285#

#SPJ11

The matrix which represents R with respect to standard coordinates is -

[tex]\left[\begin{array}{ccc}cos(17)^{o} &sin(17)^{o}&0\\-sin(17)^{o}&cos(17)^{o}&0\\0&0&1\end{array}\right][/tex]

Given is that R : R → R* be the rotation with the properties. The axis of rotation is the line L, spanned and oriented by the vector v = (3,-1,3). R is rotated about L through the angle t = 17 according to the Right Hand Rule

We have θ = 17°.

The given cartesian vector is -

3i - j + 3k

We can write the matrix as -

[tex]\left[\begin{array}{ccc}cos(17)^{o} &sin(17)^{o}&0\\-sin(17)^{o}&cos(17)^{o}&0\\0&0&1\end{array}\right][/tex]

So, the matrix which represents R with respect to standard coordinates is -

[tex]\left[\begin{array}{ccc}cos(17)^{o} &sin(17)^{o}&0\\-sin(17)^{o}&cos(17)^{o}&0\\0&0&1\end{array}\right][/tex]

To solve more questions on vectors, visit the link-

https://brainly.com/question/29740341

#SPJ4

The area of the shaded region is 319 square inches in the squares.

The area of larger square

The side length of the square which is larger is 20 in

Area of square = side ×side

=20×20

=400 square inches

The side length of the square which is smaller is 9 in

Area of square =9×9

=81 square inches

To find the area of shaded region we have to find the difference between two squares

Difference=400-81

=319 square inches

Hence, the area of the shaded region is 319 square inches in the figure which has squares.

To learn more on Area click:

https://brainly.com/question/20693059

#SPJ1

The set of side lengths that form a right triangle are: .15 m, 20 m, 25 m.

A fundamental rule of geometry known as the Pythagorean theorem asserts that the square of the length of the hypotenuse, the longest side in a right triangle, is equal to the sum of the squares of the lengths of the other two sides.

When the lengths of the other two sides of a right triangle are known, the Pythagorean theorem is used to determine the length of the third side. It is also used to determine whether a set of three side lengths, like in the previous question, constitutes a right triangle. In mathematics, physics, and engineering, the Pythagorean theorem is used to solve a variety of vector and force-related problems as well as to compute distances, areas, and volumes.

The Pythagoras Theorem is given as:

a² + b² = c²

For the given values of side lengths we have:

a. 10² = 7² + 8² No true

b. 25² = 15² + 20². True

c. 10² + 40² = 41² Not true

d. 5² = 3² + 6². Not True

Hence. the side lengths that form a right triangle are: .15 m, 20 m, 25 m.

Learn more about Pythagoras Theorem here:

https://brainly.com/question/21926466

#SPJ1

When the population standard deviation is unknown and the sample size is less than 30, the t-table value should be used in computing a confidence interval for a mean. (option a. t.)

When the population standard deviation is unknown and the sample size is less than 30, the appropriate table value to use for computing a confidence interval for a mean is the t-distribution table. This is because the t-distribution is used when the sample size is small and the population standard deviation is unknown.

The t-distribution table gives critical values for a given level of confidence and degrees of freedom (df), where df is equal to the sample size minus one (df = n - 1). The critical value from the t-distribution table is used to calculate the margin of error for the confidence interval.

To learn more about standard deviation, click here:

https://brainly.com/question/23907081

#SPJ11

The matrices in V1 are not necessarily 3x3. In fact, V1 and V2 have no non-zero matrices in common, so V1 cannot be a subset of V2.

(a) The statement is false. A finite-dimensional vector space can contain an infinite linearly independent subset.

Proof: Let V be a finite-dimensional vector space, and let B = {v1, v2, ..., vn} be a basis for V. Suppose there exists an infinite set S = {w1, w2, w3, ...} of linearly independent vectors in V. Since B is a basis for V, we know that every vector in V can be written as a linear combination of the basis vectors vi, i.e., for any vector v in V, we can write v = c1v1 + c2v2 + ... + cnvn for some scalars c1, c2, ..., cn in the field F.

Now consider the set T = {v1, v2, ..., vn, w1, w2, w3, ...}. We claim that T is linearly independent. Suppose not, and let a1v1 + a2v2 + ... + anvn + b1w1 + b2w2 + ... + bkwk = 0, where not all ai's and bj's are zero. Without loss of generality, assume that b1 is nonzero. Then we can write w1 = (-a1/b1)v1 + (-a2/b1)v2 + ... + (-an/b1)vn + (-b2/b1)w2 + (-b3/b1)w3 + ... + (-bk/b1)wk. But this means that w1 can be written as a linear combination of the vectors in T - {w1}, which contradicts the assumption that S is linearly independent. Thus, T is linearly independent, and since T is infinite, we have shown that V can contain an infinite linearly independent subset.

(b) The statement is also false. It is possible for two vector spaces V1 and V2 to have different dimensions, but V1 is not a subset of V2.

Proof: Let V1 be the space of 2x2 matrices with real entries, and let V2 be the space of 3x3 matrices with real entries. Then dim(V1) = 4 < dim(V2) = 9, but V1 is not a subset of V2 because the matrices in V1 are not necessarily 3x3. In fact, V1 and V2 have no non-zero matrices in common, so V1 cannot be a subset of V2.

To learn more about independent visit:

https://brainly.com/question/4273396

#SPJ11

the vectors u and v are neither parallel nor orthogonal.

What is Orthogonal?

In mathematics, two vectors are said to be orthogonal if they are perpendicular to each other, which means that they meet at a right angle. More generally, in a Euclidean space of any number of dimensions, two vectors are orthogonal if their dot product is zero. This means that the cosine of the angle between them is zero, which implies that the angle between them is 90 degrees (or pi/2 radians). Orthogonal vectors are important in various areas of mathematics, including linear algebra, calculus, and geometry.

The magnitudes of u and v can be found using the Pythagorean theorem:

[tex]||u|| = \sqrt{((-7)^2 + (-4)^2)} = \sqrt{(49 + 16)} = \sqrt{(65)}\\v = \sqrt{((-16)^2 + 28^2)} = \sqrt{(256 + 784)} = \sqrt{(1040)}[/tex]

Now we can calculate the dot product of u and v:

u · v = (-7)(-16) + (-4)(28) = 112

Putting it all together, we get:

[tex]112 = \sqrt{65} \sqrt{1040} cos(\theta)\\cos(\theta) = 112 / (\sqrt{65} \sqrt{1040})\\cos(\theta) = 0.926[/tex]

Since the cosine of the angle θ is positive and greater than zero, we can conclude that the angle is acute and the vectors u and v are not orthogonal.

So, in summary, the vectors u and v are neither parallel nor orthogonal.

Learn more about  Orthogonal, by the following link.

https://brainly.com/question/1952076

#SPJ1

Answer:

The vectors are orthogonal because u⋅v = 0.

Step-by-step explanation:

o7

To minimize the cost of laying the pipe, point P should be located approximately 2.7 km from point A.

1. Let x be the distance from A to P.
2. Use the Pythagorean theorem to find the distance from W to P: WP = √((5 km)² + x²).

3. The underwater distance is WP, and the overland distance is (8 - x) km.

4. Calculate the total cost: C = P10,000,000(WP) + P5,000,000(8 - x).

5. Differentiate C with respect to x: dC/dx = P10,000,000(1/2)(1/√(25 + x²)(2x)) - P5,000,000.

6. Set dC/dx = 0 to find the minimum cost: x ≈ 2.7 km.

7. Point P is approximately 2.7 km from point A along the shoreline.

To know more about Pythagorean theorem click on below link:

https://brainly.com/question/14930619#

#SPJ11