Modern genetic foods vs. artificial selection

Answers

Answer 1

The primary distinction between artificial selection and genetic engineering is that artificial selection selects already existing traits by breeding individuals with desirable traits, whereas genetic engineering modifies the genetic composition of plants or animals by introducing new traits genes or silencing genes.

Artificial selection refers to the identification of desirable qualities in plants and animals by humans, as well as the actions taken to improve and maintain such traits in future generations. Artificial selection operates in the same way as natural selection, except that in natural selection, nature makes the decisions, not humans.

Genetic engineering is a new biotechnology field. It enables the modification of an organism's genetic makeup. Recombinant DNA can be used to introduce desirable features into an organism.

To learn more on artificial selection, click here:

https://brainly.com/question/21618199

#SPJ4


Related Questions

What significance does religion have in the culture of South Asia or Southeast Asia? CER form please c: claim E: evidence R: response

Answers

Religion as prevalent in Southeast Asia, influences various aspects of life, including clothing, cuisine, and social customs. Many Southeast Asian countries, have elaborate temple complexes that are not only places of worship but also important cultural and tourist attractions.

The Claim, Evidence and Response

Claim: Religion holds significant importance in the culture of South Asia and Southeast Asia.

Evidence:

Aspects of life, such as social norms, rituals, and traditions, are entwined with religion. For instance, Hinduism, which is the predominant religion in India and Nepal, has an impact on a variety of social and cultural practices, including marriage rituals, festivals, and eating customs. Islam is the most common religion in Pakistan and Bangladesh, and it has a significant impact on a variety of facets of daily life, including as clothing, social mores, and religious rituals.

Response: The religion in South and Southeast Asia has a big influence on the culture there. It has an impact on a variety of facets of life, including social norms and traditions, art, and architecture. The variety of religions in these areas adds to each nation's distinctiveness and rich cultural legacy.

Learn more on influence of religion on culture here https://brainly.com/question/30915365

#SPJ1

which type of pollution is not linked to coal-burning power plant emissions? responses smog smog ozone hole ozone hole acid rain acid rain global warming

Answers

The type of pollution that is not directly linked to coal-burning power plant emissions is the "ozone hole" phenomenon. Therefore, option B is correct.

Coal-burning power plants are known to be a major source of several types of pollution, including smog, acid rain, and greenhouse gas emissions that contribute to global warming.

However, the "ozone hole" phenomenon is not directly linked to these emissions. The ozone hole is a thinning of the ozone layer in the Earth's stratosphere, which helps protect the planet from harmful UV radiation.

It is primarily caused by the release of human-made halogenated organic compounds, such as chlorofluorocarbons (CFCs), which are used in refrigerants, solvents, and aerosol propellants.

While coal-burning power plants may indirectly contribute to ozone depletion by emitting nitrogen oxides, sulfur dioxide, and other pollutants that react with ozone, the primary cause of the ozone hole is the release of CFCs and other halogenated organic compounds.

Learn more about coal-burning power plant emissions here:

https://brainly.com/question/9761883

#SPJ4

refers to processes of economic, social and political integration that have collectively created ties that make a difference to lives around the planet. It is the extension, acceleration and intensification of consequential worldwide interconnections
globalization

Answers

Globalization refers to processes of economic, social and political integration that have collectively created ties that make a difference to lives around the planet. It is the extension, acceleration and intensification of consequential worldwide interconnections.

The term "globalization" refers to the increasing interconnectedness of the economies, cultures, and populations across the world as a result of cross-border commerce in products and services, technology, and movements of capital, people, and information.  Over several decades, countries have formed economic alliances to enable these flows. But the phrase became more widely used in the early 1990s, following the end of the Cold War, when these cooperative agreements helped to define contemporary society.

Globalization's extensive ramifications are intricate and polarizing from a political standpoint. Similar to important technical developments, globalization helps society as a whole while hurting some sections.

Learn more about Globalization here:

https://brainly.com/question/25499191

#SPJ4

a town has just assigned a lower-density use zone to an area that previously allowed higher density. what's one reason the town may have done this?

Answers

One reason a town may have assigned a lower-density use zone to an area that previously allowed higher density is to address issues related to overdevelopment and urban sprawl.

When a neighborhood or area becomes overpopulated and overcrowded, it can lead to increased traffic congestion, pollution, and strain on infrastructure and public services. By restricting the density of development, the town can prevent these negative effects and promote a healthier, more sustainable community.

Additionally, a lower-density use zone may be more appropriate for certain types of areas, such as those with unique environmental or historical features that should be preserved.

By carefully managing the types of development that occur in these areas, the town can balance the needs of economic growth and preservation of community character. Overall, a lower-density use zone can help ensure that the town's resources are used efficiently and that the community remains livable for generations to come.

To know more about urban sprawl refer here:

https://brainly.com/question/20361268#

#SPJ11

Difference between the age of oceanic crust (about 200 million years old) and the continental crust (about 4 billion years old)

Answers

The difference between the age of oceanic crust and the continental crust is about 3.8 billion years.

How do the oceanic and continental crusts differ ?

The difference between the ages of the oceanic crust and the continental crust can be found by the formula :

= Age of continental crust - Age of oceanic crust

= 4 billion - 200 million

= 3. 8 billion years

Over billions of years, the older continental crust has seen tremendous tectonic activity, resulting in the building of mountain ranges, the opening and shutting of ocean basins, and the production of various landforms and landscapes.

However, the younger oceanic crust is more consistent in age and composition, and it has a simpler history than the continental crust.

Find out more on oceanic crust at https://brainly.com/question/22449188

#SPJ1

The most significant numbers of organic farmers are found in

Answers

The most significant numbers of organic farmers are found in Europe, particularly in countries such as Germany, Italy, Spain, France, and Austria.

According to the most recent figures from the Research Institute of Organic Agriculture (FiBL), there will be over 490,000 organic farmers in Europe in 2020, accounting for around 29% of the world's organic farmers.

Germany has over 33,000 organic farms, followed by Italy with over 31,000, Spain with over 30,000, France with over 28,000, and Austria with over 23,000.

Asia, particularly India and China, and Latin America, particularly Brazil and Mexico, have considerable numbers of organic farmers. However, in these locations, the aggregate number of organic farmers is fewer than in Europe.

For such more question on organic farmers:

https://brainly.com/question/5695985

#SPJ11

Another name for shifting cultivation, so named because fields are cleared by slashing the vegetation and burning the debris.
A. Thresh
B. Sustainable agriculture
C. Shifting cultivation
D. Slash-and-burn agriculture
slash and burn agriculture

Answers

Another name for shifting cultivation is Slash-and-burn agriculture slash and burn agriculture. Therefore the correct option is option D.

Slash-and-burn Agriculture is widely practised in tropical regions, particularly in areas with nutrient-poor soils or where population pressures make finding good agricultural land difficult.

While this type of agriculture may be effective in the short term, it has significant environmental implications such as deforestation, soil erosion, and biodiversity loss.

As a result, several governments and international organisations have worked to encourage more ecologically friendly kinds of agriculture, such as sustainable agriculture, that promote long-term food security.

The ashes left behind by the burning process provide a temporary source of nutrients for crops. Therefore the correct option is option D.

For such more question on cultivation:

https://brainly.com/question/18190082

#SPJ11

atmospheric boundary layer (i.e., the layer in which most human activities take place) is of typical height of 1 km (i.e., d in reynolds number). is atmospheric flow (wind) in this layer laminar or turbulent? justify your answer with typical properties such as wind speed and viscosity of air.

Answers

The atmospheric boundary layer is the layer of air closest to the Earth's surface, where most human activities occur. This layer is typically 1 km in height and experiences a variety of flow conditions. The wind in this layer can exhibit both laminar and turbulent flow, depending on the local conditions.

Laminar flow is characterized by smooth, orderly motion of the air molecules, while turbulent flow is characterized by chaotic and irregular motion. The transition between laminar and turbulent flow is often determined by the Reynolds number, which is a dimensionless parameter that describes the relative importance of inertial and viscous forces.

In the atmospheric boundary layer, wind speeds can vary from a few meters per second to over 30 meters per second, and the viscosity of air is relatively low. At lower wind speeds, the flow may be laminar, while at higher wind speeds, the flow becomes increasingly turbulent.

However, the transition from laminar to turbulent flow is also influenced by other factors such as surface roughness and stability of the atmospheric conditions. Overall, the flow in the atmospheric boundary layer can be both laminar and turbulent, depending on the specific conditions present.

To know more about turbulent flow refer here:

https://brainly.com/question/28146876#

#SPJ11

an inland body of water with a high salt concentrations is called a(n) . a) oxbow lake b) saturated zone c) salt lake d) proved reserve e) water table please select the best answer from the choices provided a b c d e

Answers

A salt lake is an inland body of water with a high concentration of salts and minerals.Salt lakes can be found in a variety of geographic regions and can vary greatly in size, shape, and depth.

These bodies of water typically have a higher salinity level than the surrounding freshwater systems and are often isolated from the ocean.

Some well-known examples of salt lakes include the Dead Sea in Israel, the Great Salt Lake in Utah, and the Salton Sea in California.

The high salinity of these lakes can have significant impacts on the ecosystem and can limit the types of organisms that can survive in the water.

Despite their harsh conditions, salt lakes can still support a diverse range of life, including salt-tolerant bacteria, algae, and invertebrates.

To know more about salt lakes refer here:

https://brainly.com/question/12135659#

#SPJ11

Which plate tectonic settings do basalts and gabbros form at?

Answers

Answer:

Basalts and gabbros can form at divergent plate boundaries, where magma rises up from the mantle and solidifies into basaltic or gabbroic rock as it cools and spreads out. They can also form at hotspots, where magma from the mantle rises up to the surface and forms volcanic islands or plateaus. Additionally, basaltic rocks can form at convergent plate boundaries where oceanic crust is subducted beneath a continental plate and partially melts, leading to the formation of volcanic arcs

Explanation:

suppose that a 20-year flood occurs in your location this year. what are the odds (expressed as a percentage) that your location experiences another flood of the same magnitude in the next 12 months?

Answers

The occurrence of a 20-year flood in your location this year does not affect the probability of experiencing another flood of the same magnitude in the next 12 months.

The probability of a flood of a particular magnitude in a given year is determined by statistical analysis of past weather data. A 20-year flood has a probability of 5% of occurring in any given year.

Therefore, the odds of experiencing another 20-year flood in the next 12 months are also 5%. It is important to note that the probability of any flood, regardless of its magnitude, occurring in a particular location is dependent on various factors such as weather patterns, topography, land use, and infrastructure.

Therefore, it is crucial to take appropriate measures such as flood preparedness planning, infrastructure improvements, and land use management to mitigate the risks of floods.

To know more about magnitude refer here:

https://brainly.com/question/15681399#

#SPJ11

which best describes the way composite volcanoes are built up? question 23 options: the accumulation of blocks and bombs that have been ejected over time repeated lava flows alternating layers of cinders and ash embedded with lava flows

Answers

Composite volcanoes are formed through the repeated eruption of domes, lava flows, and pyroclastic flows, but they can also be subject to powerful blasts that completely devastate their summits, as happened with the Mount St. Helens explosion and landslide in May 1980. Landslides can happen at other periods besides volcanoes.

A stratovolcano, often called a composite volcano, is a conical volcano made up of several strata (layers) of tephra and hardened lava.

A cone-shaped volcano constructed from multiple layers of lava, pumice, ash, and tephra is called a composite volcano, often referred to as a stratovolcano. A composite volcano typically produces tall peaks rather than rounded cones due to its viscous lava.

Learn more about the Composite Volcanoes here:

https://brainly.com/question/1100623

#SPJ4

When the sun exhibits lower numbers of sunspots, ______ typically occur on the earth.A. warmer temperaturesB. cooler temperatures

Answers

When the sun exhibits lower numbers of sunspots, cooler temperatures typically occur on Earth. Option B.

Sunspots are darker, cooler regions on the sun's surface where magnetic activity is higher. They follow an 11-year cycle, with periods of increased and decreased sunspot activity.

During times of lower sunspot numbers, the sun emits less solar radiation. As a result, Earth receives less energy, leading to cooler temperatures. It is important to note that other factors, such as greenhouse gas concentrations and ocean currents, also influence Earth's temperature.

However, the relationship between sunspots and Earth's temperature is supported by historical data, with cooler periods coinciding with reduced sunspot activity. Overall, lower sunspot numbers are associated with cooler temperatures on Earth.

To know more about sunspots refer here:

https://brainly.com/question/27774496#

#SPJ11

Most abundant rock type on the land surface

Answers

Sedimentary rocks are the most abundant rock type on the land surface.

These are present in lithosphere which is a solid rock.

But deeper into the earth, igneous and metamorphic rocks are present in abundance.

To learn more about rock types,

https://brainly.in/question/20168459

The most abundant rock type on the land surface is sedimentary rock. This is because sedimentary rocks are formed from the accumulation of sediments on the surface of the Earth.

These sediments can come from a variety of sources, such as erosion, weathering, and volcanic activity. Over time, these sediments are compacted and cemented together to form sedimentary rock. Sedimentary rocks cover the majority of the land surface and are found in a variety of environments, including deserts, mountains, and coastal regions.

Sandstone, limestone, and shale are examples of typical sedimentary rocks. These rocks frequently begin as sediments that are transported by rivers, then are dumped in lakes and oceans. The sediments become dry and cement together to form rock when they are buried. Volcanic ash can be found in tuffaceous sandstones.

Learn more about sedimentary rocks here:

https://brainly.com/question/10709497

#SPJ11

Because of differences in specific heat, sea surface temperatures along the North Carolina coast are typically ______ the adjacent land surface during the fall and winter. A. warmer thanB. about the same asC. cooler than

Answers

Because of differences in specific heat, sea surface temperatures along the North Carolina coast are typically warmer than the adjacent land surface during the fall and winter. Option A.

The specific heat of water is higher than that of land, meaning it takes more energy to raise the temperature of water by 1 degree Celsius compared to land. Consequently, water heats up and cools down more slowly than land.

During fall and winter, the land loses heat more quickly than the ocean, causing the land temperature to decrease at a faster rate. As a result, the sea surface temperature remains warmer than the adjacent land surface during these seasons.

This temperature difference has significant effects on the local climate, often leading to milder coastal temperatures and weather patterns influenced by the warmer ocean waters.

To know more about adjacent land refer here:

https://brainly.com/question/31260395#
#SPJ11

in the documenting glacial change interactive, what major change is observed between the time of the first photograph and the second photograph?

Answers

Globally, glaciers have been losing mass on average, and that is shown in the image. This happens due to increase in global warming and rapidly increase in the heat in the environment.

Drought can be made worse by heat, and wildfires can be sparked by hot, dry weather. The urban heat island effect is a phenomenon where temperatures in urban centers can be 1 to 7 degrees F hotter than in outlying areas as a result of buildings, roads, and infrastructure absorbing heat.

Similar to how a blanket traps heat, increasing atmospheric CO2 causes Earth's temperature to rise. Many of the interconnected systems in our environment are disrupted by the extra trapped heat.

Thus, Globally, glaciers have been losing mass on average, and that is shown in the image.

For more information about heat in the environment, click here:

https://brainly.com/question/14464160

#SPJ4

geography grade 11

a cuesta is formed because of inclined or horizontal layers ​

Answers

Answer: Horizontal Layers

Explanation:

Which U.S. city is best known for celebrating the tradition of Mardi Gras?

Answers

New Orleans is  best known for celebrating the tradition of Mardi Gras.

Mardi Gras is a Christian holiday and cultural phenomenon with roots in pagan spring and fertility rites dating back thousands of years. Carnival is another name for it. On the day before the ecclesiastical season of Lent begins, it is commemorated in many nations around the world, mostly in those with considerable Roman Catholic populations.

Mardi Gras is historically held on "Fat Tuesday," the Tuesday preceding Ash Wednesday and the beginning of Lent. Brazil, Venice, and New Orleans hold some of the most famous public holiday celebrations, attracting thousands of tourists and revelers each year.

Therefore, the U. S City of New Orleans is best known for celebrating the tradition of Mardi Gras.

To learn more on Mardi Gras, click here:

https://brainly.com/question/31080157

#SPJ4

True of false: the earth creates a larger force on you than you create on the earth.

Answers

Answer:

Hello. I can help you complete homework and essays instantly on request. Check my profile photo for easy comm uni cation

Explanation:

During a typical day on the moon, the sky appears black due to __________.A. intense scattering of visible lightB. scattering of ultraviolet radiationC. the density of the atmospheric massD. the absence of an atmosphere

Answers

During a typical day on the moon, the sky appears black due to the absence of an atmosphere. Unlike Earth, which has a thick atmosphere, the moon has no atmosphere to scatter or reflect sunlight. As a result, the sky on the moon is completely black, even during the day. Option D.

The absence of an atmosphere on the moon means that there is no air to absorb or scatter sunlight. On Earth, sunlight is scattered by the gases in our atmosphere, which causes the blue color of the sky during the day.

But on the moon, there is no such scattering, so the sky appears black. Furthermore, without an atmosphere to hold onto heat, the temperature on the moon varies greatly between day and night, with temperatures reaching over 100°C during the day and dropping to below -150°C at night.

This lack of an atmosphere also means that the moon is vulnerable to the impacts of meteoroids, which constantly pelt its surface.

To know more about atmosphere refer here:

https://brainly.com/question/28310375#

#SPJ11

True or False: A net radiation (Q*) value of less than zero indicates that the temperature should be decreasing.A. TrueB. False

Answers

The statement is true. Net radiation (Q*) is the difference between incoming solar radiation and outgoing longwave radiation.

A negative Q* value means that more energy is being lost from the surface than is being gained, which typically occurs during nighttime or when there is cloud cover.

This leads to a decrease in temperature as less energy is available to heat the surface. On the other hand, a positive Q* value means that more energy is being gained than lost, which usually occurs during the daytime. This results in an increase in temperature as more energy is available to heat the surface.

Therefore, a negative Q* value indicates that the temperature should be decreasing. It is important to note that Q* is just one factor that influences temperature, and other factors such as humidity, wind, and atmospheric pressure also play a role.

To know more about solar radiation refer here:

https://brainly.com/question/16525532#

#SPJ11

ancient glaciation events are indicated by the presence of . multiple select question. tillite deltas v-shaped valleys erratics dropstones ridges of moraine, eskers, and drumlins

Answers

Answer:

Dropstones, tillite, erratics, and ridges of moraine, eskers, and drumlins are signs of ancient glaciation events.

Explanation:

why is a change of a few degrees in average global temperatures more concerning than day-to-day weather changes of a few degrees?

Answers

A change of a few degrees in average global temperatures is more concerning than day-to-day weather changes of a few degrees because it has long-term effects on the planet's climate system.

When the Earth's temperature rises, it leads to melting of polar ice caps, sea-level rise, and changes in weather patterns.

These changes can have severe consequences on ecosystems, leading to habitat loss and extinction of species.

Additionally, extreme weather events, such as hurricanes, floods, and droughts, become more frequent and intense, causing damage to infrastructure, human life, and economies.

Therefore, it is crucial to mitigate global warming by reducing greenhouse gas emissions to limit the temperature increase and protect the planet's future.

In contrast, day-to-day weather changes do not significantly impact the planet's climate system and can be managed through adaptive measures.

To know more about average global temperatures refer here:

https://brainly.com/question/28223085#

#SPJ11

What is the main factor that controls seasonal variations in temperature?A. The distance between the sun and the EarthB. The Earth's axial tiltC. The intensity of shortwave radiation

Answers

The Earth's axial tilt is the main factor that controls seasonal variations in temperature. Option B is the correct answer.

The primary determinants of seasonal temperature fluctuations are the 23.5 tilt in the planet's axis and the elliptical orbit of the earth around the sun. The tilt of the earth's axis and the position of the earth in its orbit around the sun both have a direct impact on the angle at which a sunbeam strikes the earth and the length of daylight hours. Option B is the correct answer.

The angle of incoming solar radiation varies annually across the hemispheres because the Earth's axis tilts to the plane of orbit. Because it receives more solar radiation than the Southern Hemisphere in the months of June, July, and August, the Northern Hemisphere is warmer during those months. The Southern Hemisphere experiences greater temperatures and more sun radiation throughout the months of December, January, and February. Option B is the correct answer.

Learn more about Seasons here:

https://brainly.com/question/15734021

#SPJ4

(a) What is the significance of friction during the rolling process? (b) How does it affect thickness
reduction, process speeds, etc.?

Answers

Friction during the rolling process helps to transfer the force from the rolling mill to the metal being rolled. Proper friction can help to ensure that the metal is uniformly compressed and shaped throughout the rolling process.

Friction also helps to remove any surface or subsurface defects from the metal, improving the quality of the final product.

Friction affects thickness in several ways. If the friction is too high, it can cause the metal to stick to the rolls, resulting in uneven thickness and possible tearing or ripping of the metal.

If the friction is too low, the metal may not be compressed enough, resulting in a thicker product than desired. The ideal amount of friction depends on factors such as the type of metal being rolled, the temperature of the metal, and the speed of the rolling process.

To know more about rolling process

brainly.com/question/31502974

#SPJ4

The increase in Mg and Si content of TTGs over the course of the Archean reflects which process(es)?

Answers

The increase in Mg and Si content of TTGs over the course of the Archean reflects the mantle cooling growing contact between TTG melt and the mantle, growing depth of TTG melt generation Geothermal slopes are decreasing.

The thermal energy produced and kept in the Earth's crust is known as geothermal energy. The ongoing nuclear fusion process keeps the Earth's core at a temperature that is roughly consistent with that of the Sun. since of the extreme heat and pressure, some rocks melt, which causes the mantle to rise since the lighter materials are drawn upward by the heat.

These molten rocks that were created in the crust of the Earth are propelled upward where they become trapped in certain areas known as "hot spots." Steam is produced when the hot point makes contact with subterranean water. This hot water-formed area occasionally has surface outlets. Hot springs are where this hot water bursts from one of these sources.

Learn more about geothermal energy here:

https://brainly.com/question/23018645

#SPJ4

Neoliberal TINA-touts or with alter-globalization activists?
World Social Forum

Answers

To compare Neoliberal TINA-touts and alter-globalization activists within the context of the World Social Forum, we can consider their differing perspectives and goals.



Neoliberal TINA-touts (There Is No Alternative) believe in free-market capitalism, deregulation, and reducing government intervention in the economy.


On the other hand, alter-globalization activists seek more inclusive and sustainable alternatives to the current neoliberal economic model.

They advocate for policies that address social, economic, and environmental inequalities.


While Neoliberal TINA-touts champion free-market capitalism as the sole solution, alter-globalization activists at the World Social Forum work towards finding more equitable and sustainable alternatives.

To know more about alter-globalization refer here:

https://brainly.com/question/31576121#

#SPJ11

TRUE OR FALSE 76) Osama bin Laden declared war on the United States in 1996, because of United States support of Saudi Arabia and Israel.

Answers

FALSE. Osama bin Laden declared war on the United States in 1998, not 1996. Because of United States support of Saudi Arabia and Israel.

The reason for this declaration of war was the presence of American troops in Saudi Arabia, as well as U.S. support for Israel in its conflict with Palestine.

Bin Laden believed that the United States was interfering in the affairs of the Muslim world and sought to expel them through violent means.

This declaration of war led to a series of terrorist attacks against U.S. targets, including the bombings of U.S. embassies in Kenya and Tanzania and the 9/11 attacks.

To know more about Osama bin Laden refer here:

https://brainly.com/question/12179480

#SPJ11

TRUE OR FALSE 94) The boundary between the United States and Canada is known as a geometric boundary.

Answers

TRUE. The boundary between the United States and Canada is known as a geometric boundary.

The boundary was established through a series of treaties and agreements b/w the two countries, including the Treaty of Paris in 1783, the Treaty of Ghent in 1814, and the Webster-Ashburton Treaty in 1842.

The boundary runs from the Pacific Ocean to the Atlantic Ocean, covering a distance of over 5,500 miles.

While the boundary is mostly straight, there are a few areas where it deviates slightly to accommodate natural features such as lakes and rivers.

The boundary has been a source of cooperation & collaboration b/w the United States & Canada, with both countries working together to manage shared resources and maintain security along the border.

To know more about geometric boundary refer here:

https://brainly.com/question/19411322#

#SPJ11

3. Which Sea lies between Australia and East Timor? * O A. Celebes OB. South China C. Philippine O D. Timor​

Answers

Answer: D. Timor

Explanation:

Other Questions
18. Project Evaluation. In the previous problem, suppose your required return on the project is 10 percent and your pretax cost savings are $145,000 per year. Will you accept the project? What if the pretax cost savings are only $105,000 per year? A rationale is a statement that explains: (Giving reasons p. 2) TRUE/FALSE. When applying grounded thepry methods, the researcher obtains the sample first and then collects data it was noted as early as the 1750s that the gap in population between england and her colonies was closing rapidly. group of answer choices true false During the 11th and 12th centuries, what were some of the influences that began to advance the medieval medical tradition? When testifying at trial, the witness for the plaintiff will undergo _______ by the plaintiff's attorney, and a(n) _______ by defense counsel The rapid shallow breathing index (RSBI) is useful in predicting successful weaning from mechanical ventilation. Prior to extubation this index should be: between 300 and 400 between 200 and 300 between 100 and 200 less than 100 what is expected physical development (fine and gross motor development): infant (birth-1 yr) 1. Between Latent and Manifest conflict, which is better for B2Brelationship and why. (Short answer/ Marketing) Please help what is bd? Consider the following state of a system with four processes, p1, p2, p3, and p4, andfive types of resources, rs1, rs2, rs3, rs4, and rs5:000210001100e Present Worth Analysis is used to compare two alternatives. Alternative A has a useful life of 9 years and Alternative B has a useful life of 15 years. Each alternative can be continued with equal replacement at the end of its useful life. The MINIMUM time horizon for the analysis is most nearly: a. 3 years b. 15 yearsc. 45 years d. There is no minimum time horizon. Any analysis duration can be used. This diagram illustrates the need to A developer has been tasked to create a method to push a record from the null state to the triActive state without having the action available on a form. What should be done to implement this design? ? what is the answer Explain the statement "may not pay less than pro-rata share of operating expense of a flight". (1-4) (14 CFR 61.113) 22. What was education like in the Byzantine empire? Which calculation would have its result reported to the greater number of significant digits?a.) 3 + (15/12)b.) (3+15)/ 12 a friend is changing the tire on her car, and the jack breaks. her hand is caught under the car. a passerby notices, runs over, and lifts the car off her hand. which type of intercellular signal has responded? How do you facilitate diaphragmatic breathing while supine?Who would you teach this to?