with what tension must a rope with length 2.40 m and mass 0.135 kg be stretched for transverse waves of frequency 35.0 hz to have a wavelength of 0.780 m ?

If the dart got stuck to the spring then the period of this oscillation will be 0.11 s.

Simple harmonic motion is a specific kind of periodic motion of a body that arises from a dynamic equilibrium between an inertial force that is proportional to the body's acceleration away from the static equilibrium position and a restoring force on the moving object that is directly proportional to the magnitude of the object's displacement and acts towards the object's equilibrium position. If friction or any other energy dissipation is not present, it leads to an oscillation that is represented by a sinusoid and that lasts indefinitely. Oscillating spring perform SHM

The differential equation for SHM is given by,

[tex]\frac{d^2x}{dt^2} + \sqrt{\frac{k}{m}} x=0[/tex]

the period of the system is given by,

ω²=2π√(m/k).

Given,

k = 220 N/m.

m = 0.069 kg

x = 0.07

Putting values in the equation, we get

T=2π√(0.069/220)

T = 0.11 s

Hence period the oscillation is 0.11 s.

To know more about spring :

https://brainly.com/question/14670501

#SPJ4.

At a particular instant, a proton moving Eastward in a uniform magnetic field that's directed straight downward will experience a magnetic force directed upward. So, the correct answer is option A.

This is due to the fact that the proton is travelling eastward while the magnetic field lines are pointing downhill, creating a force that is perpendicular to both of them.

The equation F = qv x B, in which q is the particle's charge, v is its velocity, and B is the magnetic field, is used to compute this force, which is known as the Lorentz force.

The force will be directed along the vertical axis, which is upward, in this instance because the proton's charge is positive and its velocity is eastward. Hence, A) directed upward is the right response.

To learn more about proton visit:

https://brainly.com/question/14514636

#SPJ4

When a planet is moving in normal motion, it follows a regular path through the sky relative to the background stars. This motion is primarily due to the planet's orbit around the Sun and the Earth's orbit around the Sun as well.

Over the course of several nights, the planet will appear to move gradually from west to east in relation to the fixed background stars.

This motion is most easily observed by comparing the planet's position each night to a set of reference stars or other celestial objects, such as constellations. The planet's movement might not be very noticeable on a single night, but when observed over multiple nights, the change in position becomes more evident.

However, it is important to note that some planets occasionally exhibit retrograde motion, during which they appear to move backward (east to west) relative to the background stars. This phenomenon is caused by the relative motion between the Earth and the other planet, as well as their respective orbital speeds and positions. Retrograde motion is temporary, and after a period of time, the planet will resume its normal motion (west to east) relative to the background stars.

In conclusion, a planet in normal motion will typically appear to move from west to east relative to the background stars over the course of several nights. This motion is a result of the planet's orbit around the Sun, as well as the Earth's orbital movement. Observing this motion helps us understand the celestial mechanics and the relative positions of planets in our solar system.

For more such questions on Planet.

https://brainly.com/question/29585978#

#SPJ11

The performance of their circuits and ensure that they meet the required specifications

Resistors in series share the same current, while resistors in parallel share the same voltage.

In a circuit with resistors connected in series, the same current flows through each resistor because they are connected end-to-end and form a single path for the current to flow. The total resistance of the series circuit is the sum of the individual resistances, and the voltage across each resistor is proportional to its resistance.

In contrast, resistors connected in parallel have the same voltage across each resistor because they are connected across the same two points of the circuit. The total resistance of the parallel circuit is calculated using the reciprocal of the sum of the reciprocals of the individual resistances. The current through each resistor is proportional to its resistance.

These fundamental principles are used in the analysis and design of electronic circuits to determine the current, voltage, power, and other characteristics of the circuit components. By understanding how resistors behave in series and parallel configurations, circuit designers can optimize the performance of their circuits and ensure that they meet the required specifications.

To learn more about resistors visit:

https://brainly.com/question/22718604

#SPJ11

In a double-slit interference experiment with electrons, increasing the energy of the electrons can have an effect on the resulting interference pattern.

If the energy of the electrons is increased:

These changes occur because the de Broglie wavelength of the electrons decreases as their energy increases. This means that the electrons behave more like particles and less like waves, which reduces the amount of interference that occurs between them. As a result, the interference pattern becomes less spread out and more intense.

Learn More About electrons

https://brainly.com/question/860094

#SPJ11

The approximate surface temperature of the star is 5796 Kelvin (K). Wien's law states that the wavelength of the peak radiation emitted by an object is inversely proportional to its temperature. This means that as the temperature of an object increases, the peak wavelength of its emitted radiation decreases. Therefore, if a star emits the most radiation at a wavelength of 500 nm, we can use Wien's law to estimate its surface temperature.

We can start by rearranging Wien's law equation to solve for temperature:

T = b / λmax

where T is the temperature, λmax is the wavelength of peak radiation (500 nm in this case), and b is Wien's displacement constant (2.898 x 10^-3 m*K).

First, we need to convert the peak wavelength from nanometers to meters:

λmax = 500 nm = 5 x 10^-7 m

Now, we can plug in the values and solve for the temperature:

T = (2.898 x 10^-3 m*K) / (5 x 10^-7 m)
T = 5796 K

Learn more about peak wavelength here:

brainly.com/question/15119180

#SPJ11

Between points II and III  E is zero and must be closer to the smaller charge to make up for the weaker field. The correct option is (C).

The electric field due to the charges is a vector sum of the fields due to each charge. The electric field vectors due to the charges are directed away from each other, so there must be at least one point on the line where the field is zero. The electric field is proportional to the inverse square of the distance from the charges, so the field becomes weaker as the distance increases

To determine the range where the electric field strength is zero, we need to consider the electric field vectors due to the two charges at different points on the line. The electric field due to a point charge varies as 1/r^2, where r is the distance from the charge. At a point on the line to the left of charge, I, the electric field vectors due to both charges point in the same direction, so the resultant electric field is non-zero. So, option A is not true.

At a point on the line between charges I and II, the electric field vectors point in opposite directions, which means that there is a point where the electric field due to the two charges cancels out and is zero. So, option B could be a possible answer, but relevant to the Question.

At a point on the line between charges II and III, the electric field vectors still point in opposite directions, but the electric field due to the smaller charge (2q) is weaker than the electric field due to the larger charge (3q). Therefore, the point where the electric field is zero must be closer to the smaller charge to make up for the weaker field. So, option C is the correct answer.

At a point on the line to the right of charge III, the electric field vectors due to both charges point in the same direction, so the resultant electric field is non-zero. So, option D is not true.

Finally, it is not true that the electric field is zero only at infinity, as there are many points along the line where the electric field is zero. So, option E is not true.

Therefore, option C is the correct answer.

To learn about electric field strength click:

https://brainly.com/question/27018932

#SPJ4

The answer choice that is closest to the recommended minimum stopping distance is (a) 55 metres. Therefore, the correct answer is (a) 55 metres.

The recommended minimum stopping distance for a car depends on various factors such as the speed of the car, the condition of the road (dry, wet, icy, etc.), the condition of the tires, and the reaction time of the driver.

As per general guidelines, the recommended minimum stopping distance for a car travelling at 50 km/h on a dry road is:

Stopping Distance = Thinking Distance + Braking Distance

Thinking Distance is the distance travelled by the car during the driver's reaction time. This is usually taken as 1 second, which corresponds to a distance of 14 metres at 50 km/h.

Braking Distance is the distance travelled by the car during the braking process. This depends on the speed of the car, the condition of the road, and the condition of the tires. As per general guidelines, the braking distance for a car travelling at 50 km/h on a dry road is approximately 25 metres.

Therefore, the recommended minimum stopping distance for a car travelling at 50 km/h on a dry road is:

Stopping Distance = Thinking Distance + Braking Distance

Stopping Distance = 14 metres + 25 metres

Stopping Distance = 39 metres

Based on this calculation, the answer choice that is closest to the recommended minimum stopping distance is (a) 55 metres. Therefore, the correct answer is (a) 55 metres.

Learn more about stopping distance

https://brainly.com/question/24254597

#SPJ4

Certain sunglasses use a polarizing material to reduce the intensity of light reflected from shiny surfaces, such as water or the hood of a car. The optimal orientation of the transmission axis in this material should be vertical.

The reflected light is predominantly horizontally polarized due to the angle of incidence on the shiny surfaces. When the transmission axis of the polarizing material in the sunglasses is vertically oriented, it blocks the horizontally polarized light from entering the wearer's eyes. This significantly reduces the glare caused by reflections, providing a more comfortable viewing experience and enhanced visibility.

In summary, to effectively reduce the intensity of light reflected from shiny surfaces, the polarizing material in sunglasses should have a vertical orientation of its transmission axis. This configuration selectively blocks horizontally polarized light, minimizing glare and improving overall visual comfort for the wearer.

learn more about transmission here:

https://brainly.com/question/10125102

#SPJ11

The hydrostatic pressure at a given depth in a large tank of liquid is a function of depth and liquid density. Therefore, choices a and c are both valid.

The hydrostatic pressure at a given depth in a liquid is determined by the weight of the liquid above that depth.

As the depth increases, the weight of the liquid above it increases, resulting in an increase in pressure.

The pressure at a given depth can be calculated using the following formula:

P = ρgh

where P is the pressure, ρ is the density of the liquid, g is the acceleration due to gravity, and h is the depth.

As we can see from the formula, the pressure is directly proportional to the depth and the density of the liquid. The surface area of the tank does not affect the hydrostatic pressure at a given depth.

Therefore, choices a and c are both valid as the hydrostatic pressure at a given depth is a function of depth and liquid density.
For similar question hydrostatic pressure

https://brainly.com/question/28206120

#SPJ11

The rate of heat flow is tripled when the temperature difference between the reservoir and sink is tripled. the factor by which the rate of heat flow changes is 3.

When the temperature difference is tripled, the rate of heat flow will also triple, assuming that the thermal conductivity of the copper rod remains constant.The rate of heat flow through a material is directly proportional to the temperature difference between the two ends of the material, as given by the following equation:

Q = kAΔT / L

where Q is the rate of heat flow, k is the thermal conductivity of the material, A is the cross-sectional area of the material, ΔT is the temperature difference between the two ends of the material, and L is the length of the material.If the temperature difference is tripled, then the new temperature difference is three times the original temperature difference, or:

ΔT_new = 3ΔT

Substituting this into the equation for Q, we get:

Q_new = kA(3ΔT) / L

Q_new = 3(kAΔT) / L

Q_new = 3Q

Learn more about heat flow here:

https://brainly.com/question/9307612

#SPJ11

When you weigh yourself on a scale inside an airplane that is flying with constant speed at an altitude of 20,000 feet, your measured weight will be slightly less than your weight as measured on the surface of the earth. This is because the airplane and everything inside it, including you and the scale, are in freefall towards the center of the earth due to gravity.

To compare your measured weight inside an airplane flying at a constant speed at an altitude of 20,000 feet with your weight measured on the surface of the Earth, consider the following:

1. Your weight depends on the gravitational force acting on you, which is determined by the Earth's mass and your distance from its center.

2. At an altitude of 20,000 feet (approximately 6,096 meters), you are slightly farther from the Earth's center compared to being on the surface.

3. Since the gravitational force decreases with distance, your measured weight inside the airplane at 20,000 feet would be slightly less than your weight measured on the surface of the Earth.

However, the difference in your measured weight at this altitude is relatively small and may not be easily noticeable on a standard scale.

To know more about gravitational force:

https://brainly.com/question/21500344

#SPJ11

The angular displacement of the merry-go-round during the 5.0 seconds is 47.5 radians.

We can use the formula:

θ = ω_i t + 1/2 α [tex]t^2[/tex]

where:

θ = angular displacement

ω_i = initial angular velocity

t = time

α = angular acceleration

Given:

ω_i = 2.0 rad/s

α = [tex]3.0 rad/s^2[/tex]

t = 5.0 s

Substituting the values, we get:

θ = (2.0 rad/s)(5.0 s) + 1/2 (3.0 rad/[tex]s^2[/tex])(5.0[tex]s)^2[/tex]

θ = 10.0 rad + 37.5 rad

θ = 47.5 rad

Learn more about angular displacement

https://brainly.com/question/26483834

#SPJ4

If the initial and final positions are different, then the angular displacement would be the difference between the two positions, which could be more or less than 115°.

The angular displacement of an object that has rotated through an angular measure of 115° is also 115°, provided that the initial and final positions of the object are fixed. Angular measure and angular displacement are related but not the same concept.

Angular measure refers to the angle swept by an object as it rotates, measured in degrees, radians, or other units. For example, if an object completes one full rotation, its angular measure is 360° or 2π radians.

Angular displacement, on the other hand, refers to the change in angular position of an object, measured in degrees, radians, or other units. It is calculated as the difference between the final and initial angular positions of the object, and it can be positive, negative, or zero depending on the direction of rotation and the initial and final positions.

In the case of an object that has rotated through an angular measure of 115°, if we assume that its initial and final positions are the same, then its angular displacement is also 115°. However, if the initial and final positions are different, then the angular displacement would be the difference between the two positions, which could be more or less than 115°.

To learn more about displacement visit:

https://brainly.com/question/15606977

#SPJ11

The athlete has x joules of mechanical energy at the top of the hill, she will also have x joules of mechanical energy at the bottom of the hill, neglecting any losses due to friction or other factors.

Assuming that there is no significant loss of mechanical energy due to friction or other factors, the athlete on the skateboard will have the same amount of mechanical energy at the bottom of the hill as she did at the top. This is due to the law of conservation of mechanical energy, which states that the total amount of mechanical energy in a closed system remains constant.

Mechanical energy is the sum of kinetic energy and potential energy. At the top of the hill, the athlete has only potential energy due to her height above the ground. As she moves downhill, some of this potential energy is converted into kinetic energy as she gains speed. At the bottom of the hill, all of the potential energy has been converted into kinetic energy, but the total amount of mechanical energy is the same as it was at the top.

Therefore, if the athlete has x joules of mechanical energy at the top of the hill, she will also have x joules of mechanical energy at the bottom of the hill, neglecting any losses due to friction or other factors.

To learn more about mechanical visit:

https://brainly.com/question/20885658

#SPJ11

Answer: 5 n

Explanation:

In order to calculate the speed of a uniform solid sphere at the bottom of a 3 m slope, one needs to know the sphere's mass, radius, and acceleration due to gravity.

This is accomplished by applying the principle of conservation of energy, which connects the sphere's potential energy at the top of the incline to its kinetic energy at the bottom of the slope. The requisite parameters may be calculated by equating the two energies and calculating for the velocity of the sphere at the bottom of the slope.

Furthermore, the sphere is supposed to roll without sliding, which means that the velocity of the centre of mass equals the product.

For more such questions on uniform solid sphere, click on:

https://brainly.com/question/27188026

#SPJ11

When a beam of electrons is directed at a narrow pair of slits, an interference pattern is observed at a screen behind the double slit. This is due to the wave-like nature of electrons, where they can interfere with each other as they pass through the slits.

The interference pattern consists of alternating bright and dark fringes, with the bright fringes corresponding to constructive interference and the dark fringes corresponding to destructive interference.  This phenomenon is known as the double-slit experiment and demonstrates the wave-particle duality of electrons.

The spacing between the fringes depends on the distance between the slits and the screen, as well as the wavelength of the electrons. This phenomenon is known as electron diffraction and is a fundamental aspect of quantum mechanics.

To know more about electron diffraction and is a fundamental aspect of quantum mechanics:

https://brainly.com/question/31059631

#SPJ11

The sugar molecules that results in the formation of new compounds, including caramel.

A physical change is a change that occurs without altering the chemical composition of a substance. In other words, the chemical identity of the substance remains the same before and after the change. Among the options provided, the correct answer is (b) sand is filtered from salt water. This is a physical change because the salt water and sand are physically separated, but their chemical composition remains unchanged.

Option (a) is incorrect because the process of converting glucose into energy involves chemical reactions that alter the chemical composition of glucose.

Option (c) is incorrect because the process of rusting involves a chemical reaction between iron, oxygen, and water that results in the formation of a new compound, iron oxide.

Option (d) is incorrect because the process of burning propane involves a chemical reaction between propane and oxygen that results in the formation of new compounds, carbon dioxide and water.

Option (e) is incorrect because the process of heating sugar into caramel involves a chemical reaction between the sugar molecules that results in the formation of new compounds, including caramel.

To learn more about composition visit:

https://brainly.com/question/13808296

#SPJ11

The specific heat capacity and thermal conductivity of the material added to it.

Yes, the time it takes for the water to come to an equilibrium temperature can depend on the material added to it. This is because the specific heat capacity of the material added can differ from that of water. Specific heat capacity is the amount of heat energy required to raise the temperature of 1 gram of a substance by 1 degree Celsius.

For example, if a material with a low specific heat capacity, such as a metal spoon, is added to the water, it will heat up quickly and transfer heat energy to the water faster than a material with a higher specific heat capacity, such as a plastic spoon. This means that the water will reach its equilibrium temperature faster when a metal spoon is used compared to a plastic spoon.

Additionally, if the material added to the water is an insulator, such as a styrofoam cup, it will slow down the rate of heat transfer from the water to the environment. This can result in the water taking longer to reach its equilibrium temperature.

Therefore, the time it takes for the water to come to an equilibrium temperature can depend on the specific heat capacity and thermal conductivity of the material added to it.

To learn more about material visit:

https://brainly.com/question/30503992

#SPJ11

So, you know how we are able see things around us since light bounces off of them and goes into our eyes? Well, an infrared camera works a small bit in an unexpected way. Rather than seeing obvious light like our eyes do, it sees something called infrared radiation.

Everything around us gives off a small bit of this infrared radiation, indeed things that we can't see with our eyes. When an infrared camera looks at something, it's really detecting the warm that's given off by that question.

The camera encompasses a uncommon focal point that lets this infrared radiation in and it encompasses a sensor that can "see" it. At that point, it turns that heat vitality into an picture that we are able see on a screen.

Hence, in case you were to point an infrared camera at a individual or a pooch, you'd be able to see the warm coming off of them, and it would see like a colored picture where distinctive colors appear distinctive temperatures

Learn more about infrared  from

https://brainly.com/question/20009656

#SPJ1

The COP (Coefficient of Performance) of a refrigerator is defined as the ratio of heat transferred from the cold reservoir to the work input. In this case, the actual refrigerator requires 1 kW of power to transfer 2 kW of heat energy from a low-temperature space to a hot-temperature space therefore, the COP of the refrigerator operating on the reversed Carnot cycle will be 0.934.

To calculate the COP of the refrigerator operating on the reversed Carnot cycle, we need to consider the efficiency of the Carnot cycle.

The Carnot cycle is a theoretical thermodynamic cycle that operates between two heat reservoirs and provides the maximum possible efficiency for a heat engine or refrigerator.

The efficiency of the Carnot cycle is given by the formula:

Efficiency = 1 - (Tc/Th)

where Tc is the temperature of the cold reservoir and Th is the temperature of the hot reservoir.

Since we know that the refrigerator transfers 2 kW of heat energy from the low-temperature space to the high-temperature space, we can assume that the cold reservoir temperature is 10°C and the hot reservoir temperature is 30°C.

Therefore, the efficiency of the Carnot cycle is:

Efficiency = 1 - (283/303) = 0.934

The COP of the refrigerator operating on the reversed Carnot cycle is equal to the efficiency of the Carnot cycle divided by the actual power input:

COP = Efficiency / Power Input = 0.934 / 1 kW = 0.934

Therefore, the COP of the refrigerator operating on the reversed Carnot cycle is 0.934.

For more such answers on reversed Carnot cycle

https://brainly.com/question/31180540

#SPJ11

The desired amount, and then use that force and the distance over which it acts to determine the spring constant.

The spring constant is a physical property of a spring and is defined as the force required to stretch or compress the spring by a certain amount, divided by that amount. The units of spring constant are typically Newtons per meter (N/m) in the SI system.

To determine the appropriate spring constant for a particular situation, you need to consider the characteristics of the spring and the forces acting on it. For example, if you are designing a spring to support a particular weight or provide a certain level of resistance, you would need to calculate the force required to compress or stretch the spring by the desired amount, and then use that force and the distance over which it acts to determine the spring constant.

To learn more about characteristics visit:

https://brainly.com/question/920068

#SPJ11

The entropy change of the two reservoirs when heat is transferred directly from the hot reservoir at 1350 K to the cold reservoir at 600 K is 92.60 J/K.

To calculate the entropy change of the two reservoirs when heat in the amount of 100 kJ is transferred directly from a hot reservoir at 1350 K (T_h) to a cold reservoir at 600 K (T_c), you can follow these steps:

1. Calculate the heat absorbed by the cold reservoir, which is the same as the heat lost by the hot reservoir: Q_c = -Q_h = 100 kJ.

2. Calculate the entropy change of the hot reservoir: ΔS_h = -Q_h / T_h = -100,000 J / 1350 K = -74.07 J/K.

3. Calculate the entropy change of the cold reservoir: ΔS_c = Q_c / T_c = 100,000 J / 600 K = 166.67 J/K.

4. Calculate the total entropy change of the two reservoirs: ΔS_total = ΔS_h + ΔS_c = -74.07 J/K + 166.67 J/K = 92.60 J/K.

The entropy change of the two reservoirs when heat is transferred directly from the hot reservoir at 1350 K to the cold reservoir at 600 K is 92.60 J/K.

Learn more about "entropy": https://brainly.com/question/6364271

#SPJ11

False. Grating lobes can occur in any type of array, not just trdxs arrays.

Grating lobes are not attributed only to array trdxs. Grating lobes are a phenomenon that can occur in any array-based system, such as antennas or transducers when the spacing between elements in the array is large enough to cause constructive interference at undesired angles. This can result in unintended directional side lobes, which can affect the performance of the system. Grating lobes will occur whenever the size of individual elements in an array is equal to or greater than the wavelength, and there will be no grating lobes when the element size is smaller than half a wavelength.

Learn more about wavelength here: https://brainly.com/question/31143857

#SPJ11

To calculate the amount of work you can expect from a car motor that releases 700 J of energy into the cooling system and has a 50% efficiency, follow these steps:

1. Determine the total energy released by the motor: Since 700 J is released into the cooling system, this represents 50% of the total energy (because the motor is 50% efficient).

2. Calculate the total energy: To find the other 50% of the energy, which represents the work done, set up the equation:

700 J = 50% * Total Energy

3. Solve for Total Energy:

Total Energy = 700 J / 50% = 700 J / 0.5 = 1400 J

4. Calculate the work done: Since the motor is 50% efficient, the work done is also 50% of the total energy:

Work Done = 50% * Total Energy = 0.5 * 1400 J = 700 J

So, you could expect 700 J of work from the motor.

To know more about Total Energy:

https://brainly.com/question/14328309

#SPJ11

In denser medium, speed is slower but frequency remains same. So, as v = f lambda, so wavelength will also decrease. Hence, answer is: Option c.

What is speed?

The definition of speed. a direction or speed at which an object's location changes. The distance traveled relative to the time it took to travel that distance is how fast something is moving. As it just has a direction and no magnitude, speed is a scalar quantity.

What is frequency ?

The number of full wave cycles that pass a spot in a unit of time is described as frequency. The frequency in SI is measured in Hertz (Hz).

Therefore, In denser medium, speed is slower but frequency remains same. So, as v = f lambda, so wavelength will also decrease. Hence, answer is: Option c.

Learn more about speed from the given link.

https://brainly.com/question/3004254

#SPJ1

Yes, it is possible to combine the formula for the energy of a photon with the wave speed formula. Doing so allows us to relate the energy of a photon to the wavelength and frequency of the corresponding electromagnetic wave.

The formula for the energy of a photon is given by E = hf, where E is the energy of the photon, h is Planck's constant, and f is the frequency of the electromagnetic wave. On the other hand, the wave speed formula relates the wavelength, frequency, and wave speed of the electromagnetic wave, and is given by v = λf, where v is the wave speed, λ is the wavelength, and f is the frequency.

By substituting λf for v in the energy formula, we get E = hf = hc/λ, where c is the speed of light. This equation is known as the wave-particle duality equation and allows us to determine the energy of a photon based on its wavelength or frequency, and vice versa. This relationship is important in understanding the behavior of electromagnetic waves and the particles they interact with, and has numerous applications in fields such as optics, spectroscopy, and quantum mechanics.

In summary, combining the formula for the energy of a photon with the wave speed formula allows us to relate the energy of a photon to its wavelength and frequency, and vice versa, providing important insights into the nature of electromagnetic radiation.

For more such questions on Photon.

https://brainly.com/question/31591565#

#SPJ11

Answer:

jogger:  6 km

boat:  5 km

Explanation:

1/2 hr = 0.5 hr

distance = rate x time

jogger:  d = rt = (12 km/hr)(0.50 hr) = 6 km

boat:  d = (10 km/hr)(0.50 hr) = 5 km

Based on the information given, we can use the equation for the motion of a mass on a spring:

x(t) = A*cos(ωt + φ)

where x is the displacement of the mass from its equilibrium position, A is the amplitude (maximum displacement), ω is the angular frequency, and φ is the phase angle.

The angular frequency can be found using:

ω = sqrt(k/m)

where k is the spring constant and m is the mass.

Given that the spring is initially stretched by 0.100 m and the object is released from rest there, we can find the amplitude:

A = 0.100 m

The mass is 1.00 kg, and the spring constant is not given, so we cannot find ω directly. However, we are given that the next time the speed of the object is zero is 0.200 s later. This means that the object goes through one complete oscillation in that time. Therefore, we can use the period of oscillation:

T = 2π/ω

to find ω:

ω = 2π/T = 2π/0.200 s = 31.4 rad/s

Now we can find the maximum speed of the object. At the maximum displacement, the velocity is zero, so we need to find the maximum displacement:

x_max = A = 0.100 m

Then we can use the equation for velocity:

v(t) = -A*ω*sin(ωt + φ)

The maximum speed occurs at t = π/2ω, when the sine function is at its maximum value of 1:

v_max = -A*ω*sin(π/2 + φ) = -A*ω*sinφ

We do not know the phase angle φ, but we can use the fact that the object is released from rest at x = A to set φ = 0:

v_max = -A*ω*sin(0) = 0

Therefore, the maximum speed of the object is 0 m/s.

To know more about motion of mass please click:-

https://brainly.com/question/8360634

#SPJ11