What Receiver FSM in RDT over Perfectly Reliable Channel (RDT 1.0)
Compared to other RDT versions, the Receiver FSM in RDT over Perfectly Reliable Channel (RDT 1.0) is rather straightforward.
The receiver watches for incoming packets and determines if any are corrupted. The data is extracted and an acknowledgment (ACK) packet is sent back to the sender if the packet is not damaged.
In the event that the packet is corrupted, the receiver replies with a negative acknowledgment (NAK) packet, asking the sender to deliver the packet again.
Learn more about Receiver FSM at:
https://brainly.com/question/31197175
#SPJ4
you are looking through your network usage logs and notice logins from a variety of geographic locations that are far from where your employees usually log in. could this be a problem and why?
Seeing logins from a variety of geographic locations that are far from where your employees usually log in could indicate that someone who is not authorized to access your network has gained access. Therefore, if it can be a problem.
This could be a sign of a security breach, as an attacker could be using stolen credentials to log into your network from a different location to avoid detection.
It's important to investigate these logins and take appropriate action to prevent any unauthorized access to your network.
What is the network?In general, a network is a group of interconnected things or systems that work together to exchange information or resources.
For more information about network, visit:
https://brainly.com/question/1027666
#SPJ11
What immediately follows the Start Frame Delimiter in an ethernet frame?Payload Destination Media Access Control (MAC) addressEtherType field Frame Check Sequence
In the area of the Ethernet frame, the Start Frame Delimiter (SFD) is said to be one that has a one-byte pattern that tends to tell more about the start of a new frame.
What is ethernet frame?This is one that is often followed by the SFD in an Ethernet frame and it is seen as the Destination Media Access Control (MAC) address.
The term Destination MAC address is one that is also seen as a six-byte field that tends to tell more on the MAC address of the given recipient of a given Ethernet frame.
Therefore, After the Source as well as Destination MAC addresses, the Ethernet frame is one that is made up of an EtherType field. The
Learn more about ethernet from
https://brainly.com/question/1637942
#SPJ1
The state of a program for denotational semantics is the value of all its current variable.
To answer your question the state of a program in denotational semantics is determined by the values of all its current variables. A variable is a storage location in a program that can hold a value, and the semantics of a program refers to the meaning and behavior of its statements and expressions. In denotational semantics, the state of a program is represented as a mathematical function that maps variable names to their current values. This function captures the program's current state and allows us to reason about its behavior and effects. Therefore, the value of each variable is an essential component of the program's semantics in denotational semantics.
"The state of a program for denotational semantics is the value of all its current variable": Yes, in denotational semantics, the state of a program is represented by the values of all its current variables. These values are used to understand the meaning or "semantics" of the program, by mapping them to mathematical objects that capture the program's behavior.
More on semantics : https://brainly.com/question/24307697
#SPJ11
A document record's Permission tab is used to set levels of access to who?
A document record's Permission tab is used to set levels of access to various users or user groups within an organization or system.
What is the Permission tab?
Configuring the permissions, one can control who can view, edit, or delete the document, ensuring that only authorized individuals have access to specific information. The Permissions tab allows the admin to provide access rights to single users or groups to the record with certain permissions. The granted permission to users by the admin can be to view, modify, discuss, create, download, delete, and retire documents.
To know more about the document visit:
https://brainly.com/question/20696445
#SPJ11
True or false: By default, if you supply the input data from a file on the file system like this: sed -f sed_script.sed original.txt It will makes changes to the file "original.txt" directly in the file.
False by default, the "sed" command will not modify the original file.
"Do changes made using the sed command get saved directly to the original file?"When using the "sed" command, the modified text is typically output to the standard output (i.e., the console) by default. However, if you want to make changes to the original file, you need to use the "-i" flag. For example, if you have a sed script named "sed_script.sed" and a file named "original.txt", you would use the following command to modify the file directly:
sed -i -f sed_script.sed original.txt
Without the "-i" flag, the sed command will only output the modified text to the console, and the original file will remain unchanged.
It is important to be cautious when using the "-i" flag, as it can modify the original file without creating a backup. It is recommended to make a backup copy of the file before running the command with the "-i" flag.
In summary, the default behavior of the "sed" command is to output the modified text to the console, and the "-i" flag must be used to modify the original file directly.
To know about sed commands more visit:
https://brainly.com/question/19567130
#SPJ11
What mechanism does HPKP implement?
The mechanism that HPKP (HTTP Public Key Pinning) implements is a security feature that helps prevent man-in-the-middle attacks by associating a specific cryptographic public key with a specific web server. This ensures that web browsers only trust certificates issued for that server by the associated public key, adding an extra layer of security to HTTPS connections.
What is the purpose of HPKP and how does it enhance the security of HTTPS connections?HPKP (HTTP Public Key Pinning) is a security feature that helps prevent man-in-the-middle attacks by associating a specific cryptographic public key with a specific web server. When a user's browser connects to a website, it receives the server's public key as part of the SSL/TLS certificate chain. The browser then checks whether the public key matches one of the pinned keys that it has previously received for that website. If the keys match, the browser can be confident that it is communicating with the genuine server and not an imposter.
HPKP provides an extra layer of security to HTTPS connections by ensuring that the browser only trusts certificates issued for that server by the associated public key. This makes it much harder for attackers to intercept and manipulate communications between the user and the server.
It's worth noting that HPKP has been deprecated in favor of the more flexible Certificate Transparency (CT) mechanism, which provides similar security guarantees without the risk of permanent lockout if keys are misconfigured. However, HPKP remains a useful technique for enhancing the security of legacy systems that do not support CT.
To know about HPKP (HTTP Public Key Pinning) more visit:
https://brainly.com/question/17243927
#SPJ11
clusters that are marked by the operating system as usable when needed are referred to as .
When new data needs to be written, the operating system can allocate these free clusters as necessary.
Explain clusters that are marked by the operating system?
Clusters that are marked by the operating system as usable when needed are referred to as "free clusters" or "unallocated clusters." These terms indicate that the clusters are available for storing data, as they are not currently occupied or assigned to any specific files or applications. When new data needs to be written, the operating system can allocate these free clusters as necessary.An army sergeant works as a trauma surgeon. Which two career clusters is he most likely a part of? the Energy cluster and the Education and Training cluster the Health Services cluster and the Energy cluster the Government and Public Administration cluster and the Health Services cluster the Education and Training cluster and the Government and Public Administration cluster
Learn more about clusters.
brainly.com/question/30862225
#SPJ11
consider the execution of a program that results in the execution of 8 million instructions on a 250-mhz processor. the program consists of four major types of instructions. the instruction mix and the cpi for each instruction type are given below. what is the program execution time in the second?
The program execution time is given as 0.0768 seconds.
How to solve for the program execution timeThe formula for the execution is given as Execution time = (number of instructions) x CPI / clock rate
The instructions is 8 million instructions , the clock rate is 250 MHz
Next we have to solve for the CPI
Foe 1 = 30 percent
2 = 20 percent
3 = 40 percent
4 = 10 percent
The types for the instruction are:
2, 3, 1, and 5
The weighted average of the CPI would then be:
Weighted average CPI
= (2 x 0.3) + (3 x 0.2) + (1 x 0.4) + (5 x 0.1)
= 1.9
We will have to add this to the execution time. So we will have
Execution time = (8,000, 000 x 1.9) / (250,000,000) = 0.0768 seconds
Hence the execution time is 0.0768 seconds
Read more on execution time here:https://brainly.com/question/31041094
#SPJ1
You are responsible for managing client workstations for your company. A frantic user calls you one morning exclaiming that "nothing is working."
What should you do first in your troubleshooting strategy?
The first step in your troubleshooting strategy should be when you're responsible for managing client workstations, creating user reports that "nothing is working."
Troubleshooting strategy
First, in your troubleshooting strategy, you should calmly gather as much information as possible from the user, including specific details about the issue they're experiencing, any error messages, and what they were doing when the problem occurred. This will help you better understand the situation and identify potential causes for the problem, allowing you to effectively resolve the issue with the client workstation. I would ask them to be as specific as what steps they have already taken to try to resolve the issue. This will help me to narrow down the possible causes and begin the process of resolving the problem.
To know more about Troubleshooting strategy visit:
https://brainly.com/question/31542455
#SPJ11
Write the definition of a function absoluteValue that recieves a parameter containing an integer value and returns the absolute value of that parameter.
A function named "absoluteValue" takes an integer parameter and returns the absolute value of that parameter.
The absolute value of a number is its distance from zero on the number line, regardless of whether the number is positive or negative.
The function can be implemented by first checking if the input parameter is negative, and if so, multiplying it by -1 to obtain its positive equivalent. If the input parameter is already positive, the function simply returns the parameter as is. This conditional statement can be written using an "if" statement.
Here's an example implementation of the absoluteValue function in Python:
def absoluteValue(num):
if num < 0:
return -num
else:
return num
This function can be used to calculate the absolute value of any integer value passed as its argument.
learn more about integer parameter here:
https://brainly.com/question/30744353
#SPJ11
fill in the blank. * a ____ mean is the average on the dependent variable for all participants on one level of the independent variable, ignoring the other independent variable.
Marginal
A marginal mean is the average on the dependent variable for all participants on one level of the independent variable, ignoring the other independent variable.
A marginal mean is the average score on the dependent variable for all participants at one level of the independent variable, while ignoring the other independent variables. In other words, it represents the mean score of a specific group or level of one independent variable, regardless of the levels of other independent variables. Marginal means can be useful in comparing the effects of different levels of an independent variable on the dependent variable, while holding other independent variables constant. They are commonly used in analysis of variance (ANOVA) and other statistical analyses.
To learn more about variable click on the link below:
brainly.com/question/28259771
#SPJ11
Which Apple service allows an organization to deploy apps to devices?
a) Automated MDM enrollment
b) Global Service Exchange
c) Volume Purchasing of Apps and Books
d) Pages
The Apple service that allows an organization to deploy apps to devices is (c) Volume Purchasing of Apps and Books.
Volume Purchasing of Apps and Books, also known as Apple Business Manager or Apple School Manager, is a service designed for organizations to easily deploy apps and books to their devices. This service provides centralized control over the purchase and distribution of apps, making it efficient and convenient for organizations to manage multiple devices.
To utilize this service, organizations must first enroll in the Apple Business Manager or Apple School Manager program. Once enrolled, they can purchase apps in bulk and assign them to specific devices or users. This enables IT administrators to customize the apps available on each device, ensuring that employees or students have the necessary tools for their tasks. Additionally, organizations can also take advantage of app licensing, which allows them to retain ownership and control of purchased apps, even after they have been distributed to devices.
In summary, the Apple service that enables organizations to deploy apps to devices is the Volume Purchasing of Apps and Books. This service streamlines the process of purchasing, distributing, and managing apps on multiple devices, providing organizations with a convenient and efficient solution.
Learn more about app licensing here:
https://brainly.com/question/31619794
#SPJ11
How does a database management system that follows the relational model handle entities, attributes of entities, and relationships between entities?
A database management system that follows the relational model handles entities by organizing them into tables. Each table represents a specific type of entity, and the columns of the table represent the attributes of that entity.
What are attributes?
The attributes of entities are defined as columns within each table. Each attribute is assigned a data type, such as text, number, or date, and can be further defined with constraints that restrict the range of values that can be stored.
Relationships between entities are established through the use of foreign keys. A foreign key is a column in one table that refers to the primary key of another table. This enables the database management system to maintain referential integrity, ensuring that the data remains consistent and accurate.
Overall, a database management system that follows the relational model provides a flexible and efficient way to handle entities, attributes of entities, and relationships between entities. By organizing data into tables and establishing relationships between them, the system can quickly retrieve and update data as needed, while ensuring data integrity and consistency.
To know more about database management system visit:
https://brainly.com/question/31567858
#SPJ11
Write the definition of a function square which recieves a parameter containing an integer value and returns the square of the value of the parameter.
A function called "square" that takes an integer value as a parameter and returns the square of that value.
The "square" function is a mathematical function that takes a single integer parameter as input and returns the square of that parameter as output. The function can be defined using any programming language, and the specific syntax may vary depending on the language used. For example, in Python, the function could be defined as follows:
def square(x):
return x**2
Here, the parameter "x" represents the input value, and the function returns the value of "x" raised to the power of 2, which is equivalent to the square of "x". The function can be called with any integer value, and it will return the square of that value as output.
learn more about function here:
https://brainly.com/question/17971535
#SPJ11
The following SQL statement will produce what output?
SELECT last_name, department_name
FROM employees
CROSS JOIN departments;
The output will contain all the possible combinations of last_name and department_name columns from the employees and departments tables, respectively.
The following SQL statement will produce a result set that shows the Cartesian product of the employees and departments tables:
SELECT last_name, department_name
FROM employees
CROSS JOIN departments;
In other words, for each row in the employees table, this query will join it with every row in the departments table, resulting in a result set that includes all possible combinations of employees and departments. This type of join is also known as a Cartesian join.
The output will contain all the possible combinations of last_name and department_name columns from the employees and departments tables, respectively. Note that this type of join can produce a very large result set, and is usually used when you want to generate a list of all possible combinations between two tables.
Learn more about Cartesian join here:
https://brainly.com/question/31365937
#SPJ11
what is the worst-case runtime complexity of listadt's get(int index) operation when the listadt is implemented as an oversize array, assuming that the problem size n is the number of elements stored in the list? group of answer choices
The worst-case runtime complexity of listadt's get(int index) operation is O(1), because accessing an element in an array by index is a constant time operation, independent of the size of the array.
What is the worst-case runtime complexity of listadt's get(int index) operation ?The worst-case runtime complexity of listadt's get(int index) operation when the listadt is implemented as an oversize array would be O(1), assuming that the problem size n is the number of elements stored in the list.
This is because accessing an element in an array by index is a constant time operation, regardless of the size of the array.
Therefore, the complexity of listadt's get operation is independent of the number of elements stored in the list.
Learn more about worst-case runtime complexity
brainly.com/question/30848213
#SPJ11
Given a PySpark dataframe:
1- Get all records where the column sale_id is not null.
2- Organize it in descending order based on the created_at column.
3-
Assuming the PySpark dataframe is named df, the following code can be used:
Get all records where the column sale_id is not null:
df_not_null = df.filter(df.sale_id.isNotNull())
Organize it in descending order based on the created_at column:
df_not_null_desc = df_not_null.orderBy(df_not_null.created_at.dsc())
This will return a new dataframe df_not_null_desc that contains only the records where the sale_id column is not null, sorted in descending order based on the created_at column.
Learn more about PySpark dataframe at:
https://brainly.com/question/28190273
#SPJ4
What is the new mechanisms in rdt2.0 from rdt1.0
RDT2.0 is the latest version of the Remote Desktop Protocol (RDP) developed by Microsoft. It was designed to improve the performance and security of remote access to Windows systems.
The most notable new mechanisms in RDT2.0 from RDT1.0 are the use of Network Level Authentication (NLA) and the introduction of the Remote Desktop Gateway (RDG).
NLA requires the user to authenticate before they can connect to the remote system, while the RDG provides secure access to remote systems over the internet, allowing users to access their desktops from anywhere without the need for a virtual private network (VPN).
Learn more about NLA at:
https://brainly.com/question/31267675
#SPJ4
Translate function f into MIPS assembly language. If you need to use registers $t0 through $t7, use the lower numbered registers first. Assume the function
declaration for func is "int func(int a, int b);".
The code for function f is as follows:
int f(int a, int b, int c, int d){
return func(func(a, b), c + d);
}
Answer:
f: addi $sp,$sp, -12
sw $ra,8($sp)
sw $s1,4($sp)
sw $s0,0($sp)
move $s1,$a2
move $s0,$a3
jal func
move $a0,$v0
add $a1,$s0,$s1
jal func
lw $ra,8($sp)
lw $s1,4($sp)
lw $s0,0($sp)
addi $sp,$sp,12
jr $ra
Can someone please explain why we only defined 3 variblaes and ignorerege int d and why we sayed jal func and then move $a0, $v0, and are we assuming $a0 and $a1 are and b respectivly too?(it would be great if you could explain each process and its reasoning). Thank you so much!
In the code attached, it takes you through the various steps in the MIPS assembly code that is known to be used for the function f and this is done one after the other for better understanding.
What is the assembly code about?In the first code, the instruction tends to shift the stack pointer $sp by the act of subtracting 12, and then giving more space on the stack for the saving of the values of registers which are $ra, $s1, and $s0.
Therefore, based on the last code, there is an instruction that carries out a jump to the address that has been saved in register $ra, and is one that is the return address that is obtained from the original function call.
Learn more about assembly code from
https://brainly.com/question/13171889
#SPJ4
What does the ls command do?
a) Restart computer
b) Change directories
c) Delete files/directories
d) List directory contents
d) List directory contents. the ls command List directory contents. The "ls" command in a terminal lists the contents of the current working directory.
It displays the names of files and directories located in the current directory, along with their permissions, ownership, size, and modification time. The command can be used with various options to modify its behavior, such as showing hidden files or sorting the output by size or date. For example, running "ls -l" would display the contents of the current directory in a long format, including additional information about the files and directories, such as permissions, ownership, size, and modification time. Similarly, running "ls -a" would show all files, including hidden ones, in the directory. the ls command List directory contents. Overall, "ls" is a fundamental command for navigating and managing files in a Unix-like operating system.
learn more about ls command here:
https://brainly.com/question/29603028
#SPJ11
which of the following is not a cloud computing security issue? a. system vulnerabilities b. bandwidth utilization c. compliance regulations d. insecure apis
"bandwidth utilization." This is not a security issue in cloud computing, but rather a performance or cost issue. System vulnerabilities, compliance regulations, and insecure APIs are all significant security concerns in cloud computing.
Bandwidth utilization refers to the amount of data being transferred between the cloud and the user, and while it can impact performance and costs, it is not a security issue. System vulnerabilities, such as unpatched software or weak authentication, can expose sensitive data to unauthorized access or attacks. Compliance regulations require organizations to meet specific security and privacy standards, which can be challenging to achieve in the cloud. Insecure APIs can allow attackers to gain access to cloud services and data. Therefore, it is crucial to address these security issues to ensure the confidentiality, integrity, and availability of cloud computing.
learn more about cloud computing here:
https://brainly.com/question/29737287
#SPJ11
What layer in the Transmission Control Protocol/Internet Protocol (TCP/IP) model is responsible for defining a way to interpret signals so network devices can communicate?TransportNetworkData linkApplication
The layer in the Transmission Control Protocol/Internet Protocol (TCP/IP) model that is responsible for defining a way to interpret signals so network devices can communicate is the Data Link layer.
Data Link layer.
The data link layer ensures that data is properly transmitted and received between network devices, and it is crucial for establishing and maintaining reliable communication. The Data Link layer in the Transmission Control Protocol/Internet Protocol (TCP/IP) model is responsible for defining a way to interpret signals so network devices can communicate. This layer is responsible for managing the physical transmission of data over the network and ensuring that data is transmitted error-free. It also provides addressing and error detection capabilities. The layers above the Data Link layer (Transport, Network, and Application) rely on the Data Link layer to provide a reliable and efficient communication channel.
To know more about TCP/IP model visit:
https://brainly.com/question/30544746
#SPJ11
What is Microsoft's TLS VPN solution?
Microsoft's TLS VPN solution is called Azure Virtual Private Network (VPN) Gateway. This secure and private connection technology uses the Transport Layer Security (TLS) protocol to establish a protected connection between remote users and the organization's internal network resources.
The Azure VPN Gateway consists of the following components:
1. VPN Gateway: A cloud-based resource that acts as a secure tunnel for encrypted traffic between remote users and the internal network.
2. Virtual Network: A logically isolated section of the Azure cloud that contains your organization's network resources, such as virtual machines and storage accounts.
3. Site-to-Site (S2S) VPN: A secure connection between your on-premises network and the Azure Virtual Network, allowing for seamless communication between the two networks.
4. Point-to-Site (P2S) VPN: A secure connection between individual remote users and the Azure Virtual Network, enabling users to access resources in the organization's network through a TLS VPN connection.
To set up the Azure VPN Gateway, follow these steps:
1. Create an Azure Virtual Network to host your internal network resources.
2. Deploy a VPN Gateway within the Virtual Network to act as the secure connection point for remote users.
3. Configure the Site-to-Site VPN to connect your on-premises network to the Azure Virtual Network.
4. Set up Point-to-Site VPN connections for remote users to securely access the Azure Virtual Network.
5. Configure the necessary authentication and authorization methods to ensure only authorized users can access the network.
In summary, Microsoft's TLS VPN solution, Azure VPN Gateway, provides a secure and private connection for remote users to access the organization's internal network resources using the Transport Layer Security protocol. By following the steps mentioned, you can create a protected environment for your organization's data and resources.
Learn more about VPN here:
https://brainly.com/question/28945467
#SPJ11
What technology is found on most processors today that must be enabled in UEFI/BIOS?
The technology found on most processors today that must be enabled in UEFI/BIOS is called "virtualization technology."
Virtualization technology
Most processors today include virtualization technology, which must be enabled in UEFI/BIOS. This technology allows for the creation of virtual machines and is essential for running certain software and operating systems. Without virtualization technology enabled, users may experience compatibility issues and limitations in their computing capabilities. This feature allows multiple operating systems to run simultaneously on a single physical computer by creating isolated virtual environments. To enable virtualization technology, you'll need to access your computer's UEFI/BIOS settings and locate the relevant option, often found under "CPU Configuration" or a similar menu. Once you find the option, enable it and save your changes before exiting the UEFI/BIOS.
To know more about UEFI/BIOS visit:
https://brainly.com/question/30458362
#SPJ11
Which tool allows you to adjust audio frequencies on a clip on the timeline?
An Equalizer (EQ) tool allows you to adjust audio frequencies on a clip on the timeline.
We have,
An EQ is a digital audio processing tool that can boost or cut specific frequency ranges in an audio signal.
In audio editing or mixing software, you can apply an EQ to an individual clip on the timeline to adjust its frequency content.
You can use an EQ to enhance or reduce certain frequency ranges in the clip, such as boosting the bass or reducing harsh high frequencies.
Most EQ tools provide a graphical interface that displays a frequency spectrum with vertical sliders that you can use to adjust the gain or attenuation of different frequency bands.
Some EQs also provide preset EQ settings, making it easier to quickly apply common frequency adjustments.
Thus,
An Equalizer (EQ) tool allows you to adjust audio frequencies on a clip on the timeline.
Learn more about audio signals here:
https://brainly.com/question/28559186
#SPJ4
· A host's routing table contains paths to what type of devices?
The host's routing table contains routers, switches, and other hosts.
A host's routing table contains paths to various types of devices, including routers, switches, and other hosts on a network. These paths enable the host to effectively communicate and transmit data across the network.
Learn more about routing table:
brainly.com/question/31597670
#SPJ11
How would you write text to a web page with java script?
To write text to a web page with JavaScript, you can use the DOM (Document Object Model) to access the HTML elements on the page and modify their contents. Here's an example code snippet that shows how to write text to a div element with an id of "myDiv":
```
// Get a reference to the div element
var myDiv = document.getElementById("myDiv");
// Set the text content of the div element
myDiv.textContent = "Hello, world!";
```
In this example, we first use the `getElementById` method to get a reference to the div element with an id of "myDiv". Then, we use the `textContent` property to set the text content of the div to "Hello, world!". This will overwrite any existing content in the div.
You can also use other properties, such as `innerHTML`, to write HTML code to a page. However, be careful when using `innerHTML` as it can introduce security risks if you're not careful.
Learn More about DOM here :-
https://brainly.com/question/30389542
#SPJ11
for some reason, your source computers are not communicating properly with the collector. which tool would you use to verify communications?
If your source computers are not communicating properly with the collector, you can use a network diagnostic tool to verify communications.
One such tool is the ping utility, which sends a signal to the collector from each source computer and reports back on the response time and any errors encountered. Another tool is traceroute, which traces the path of data packets between the source and collector, identifying any bottlenecks or failures along the way.
By using these tools, you can quickly identify and troubleshoot any communication issues between your source computers and collector. So the answer is network diagnostic tool.
Learn more about diagnostic tool: https://brainly.com/question/31012079
#SPJ11
what is Rolling hash (also known as recursive hashing or rolling checksum)?
Rolling hash is a technique used in computer science to quickly and efficiently compute a hash or checksum of a large block of data by breaking it into smaller, fixed-size blocks and computing a hash or checksum for each block.
For what rolling hash is used for?The rolling hash technique is particularly useful for tasks such as file synchronization and network traffic analysis because it can detect changes in the data over time. The process works by breaking the data into fixed-size blocks and computing a hash or checksum for each block. The hash or checksum for the current block is then computed using the previous block's hash or checksum as a starting point. This allows the rolling hash to be computed quickly and efficiently, even for very large blocks of data. The key feature of the rolling hash is that it is computed recursively, allowing it to be used to detect changes in the data over time.
To know more about rolling hash more visit:
https://brainly.com/question/29970427
#SPJ11
